College Algebra / Rates of change and behavior of graphs
Rates of change and behavior of graphs
All 10 lessons, in order.
The unit at a glance
- Rate of change and average rate of change
A rate of change tells you how much one quantity changes for each single unit of another.
- On a graph, the average rate of change is a slope
On a graph, each input and its output make a point: the input tells you how far across, the output tells you how high.
- Average rate of change from a formula
When the function is given as a formula, you build a small table of your own.
- When an endpoint is a letter, the answer is an expression
Sometimes one end of the interval is a letter, like [0, a] or [5, a].
- The difference quotient: average rate of change from x to x + h
The difference quotient has two ordinary actions hidden in its name.
- Difference quotient of a quadratic
A quadratic polynomial uses constants, multiples of the input, and a nonzero multiple of the squared input.
- Difference quotient of a fraction
When the input sits in the bottom of a fraction, the output change becomes one fraction minus another with different bottoms.
- Increasing, decreasing, and constant
Picture a hiking trail seen from the side.
- Local maxima and minima
Think of one hill on a roller coaster.
- Toolkit behavior, then absolute maximum and minimum
Think of a toolkit as the basic shapes you keep in a drawer.
Rules (10)
- Rate of change and average rate of change
Average rate of change = = = , with ≠ and both outputs defined. Use the same endpoint order on top and bottom. Units are output units per input unit.
- On a graph, the average rate of change is a slope
For [a, b] = [left end, right end], with a < b and both outputs defined, average rate = . This is the slope of the straight ruler through (a, f(a)) and (b, f(b)).
- Average rate of change from a formula
On [a, b] = [left end, right end], with a < b and both outputs defined, average rate = . Evaluate the two endpoint outputs first, then subtract and divide. Preserve all nonzero-bottom and square-root restrictions.
- When an endpoint is a letter, the answer is an expression
For a fixed input 5 and an endpoint a, rate = , with a ≠ 5 and both outputs defined. On [5, a], a > 5; if a < 5, use the sorted interval [a, 5]. Factor a polynomial numerator before canceling a matching whole factor.
- The difference quotient: average rate of change from x to x + h
Difference quotient = , with h ≠ 0 and both outputs defined. It is the average rate on [x, x + h] if h > 0, and on the sorted interval [x + h, x] if h < 0.
- Difference quotient of a quadratic
(x + h = + 2xh + . For f(x) = , the difference quotient is 2x + h, with h ≠ 0. Multiply any outside coefficient into every expanded term, subtract all of f(x), then factor the whole numerator before canceling h.
- Difference quotient of a fraction
For f(x) = , combine the output difference over x(x + h), then divide by h to obtain . Require h ≠ 0, x ≠ 0, and x + h ≠ 0. Other fraction bottoms need their own product as the common bottom.
- Increasing, decreasing, and constant
On an interval, whenever a < b: increasing means f(a) < f(b); decreasing means f(a) > f(b); constant means f(a) = f(b). This course reports intervals of behavior with open endpoints. These are comparisons between inputs, not a direction assigned to one point.
- Local maxima and minima
A local maximum at input b has f(b) ≥ f(x) for every x in some open interval around b contained in the domain. A local minimum has f(b) ≤ f(x) there. Its value is f(b); its location is b; its point is (b, f(b)). Equal nearby heights are allowed by these nonstrict inequalities. A strict local extremum uses > or < for every nearby x ≠ b.
- Toolkit behavior, then absolute maximum and minimum
The absolute maximum is f(c) when c is in the domain and f(c) ≥ f(x) for every domain input x. The absolute minimum is f(d) when d is in the domain and f(d) ≤ f(x) for every domain input x. The value must be attained, meaning reached at an accepted input.
Recipes (10)
- Rate of change and average rate of change
- Name the input and output, including their units.
- For a left-to-right calculation, call the smaller input and the larger input ; keep each output with its input.
- Find Δy = − and Δx = − , using the same order.
- Check Δx ≠ 0, then divide Δy by Δx.
- Attach output units per input unit. With inputs in increasing order, positive means a net rise and negative a net fall.
- On a graph, the average rate of change is a slope
- Locate both interval endpoints on the horizontal axis.
- At each input, move vertically to the solid graph and read its height. Count grid steps; estimate if it lies between lines.
- Subtract right height minus left height, then right input minus left input.
- Divide rise by run and interpret the sign.
- Average rate of change from a formula
- Check that both inputs are allowed: no bottom may be zero, and a real square root needs a nonnegative inside.
- Evaluate f(a), placing the whole input in parentheses at every variable position.
- Evaluate f(b) the same way.
- Subtract f(b) − f(a). If fractions occur, make their bottoms match first.
- Divide by b − a. Simplify exact fractions and attach units.
- When an endpoint is a letter, the answer is an expression
- Evaluate the fixed numerical endpoint.
- Substitute the endpoint letter to write the other output.
- Subtract the outputs and write the matching input difference.
- For a polynomial, factor the numerator and verify by multiplying back.
- Cancel only a matching factor multiplying the whole numerator, preserving the original restrictions.
- If the rate is given, set the simplified rate expression equal to that number, solve, and check the endpoint in the original quotient.
- The difference quotient: average rate of change from x to x + h
- 1. Plug in: replace every x in the formula by the whole input (x + h); multiply out the needed products.
- 2. Subtract: write −(f(x)) with parentheses, then let that minus reach every term.
- 3. Simplify: combine like terms; for a fully expanded polynomial, the terms independent of h cancel.
- 4. Cancel h: when h multiplies the entire numerator, divide that nonzero factor out; keep every original restriction.
- Difference quotient of a quadratic
- 1. Plug in: replace every x by (x + h), multiply out the square, and apply each outside multiplier.
- 2. Subtract: keep all of f(x) in parentheses after a minus, then flip every term's sign.
- 3. Simplify: combine matching polynomial terms; the terms independent of h cancel.
- 4. Cancel h: write every remaining term as h times something, factor h from the whole numerator, and cancel only for h ≠ 0.
- Difference quotient of a fraction
- 1. Plug in: replace every input occurrence, including those below a fraction bar, by the whole new input.
- 2. Subtract: use the product of the original bottoms as a common bottom, multiply each top by its missing factor, and keep the second top grouped.
- 3. Simplify: distribute the outside minus and combine the numerator terms.
- 4. Cancel a valid h factor: multiply by , cancel only a whole nonzero factor, and keep all original restrictions.
- Increasing, decreasing, and constant
- Begin at the left of the whole given graph. Read the horizontal-axis label: the input might be x or t.
- Mark turning inputs, flat boundaries, and breaks.
- Mark actual domain ends. A finite end dot gives a finite boundary; arrows or stated continuation can justify infinity.
- Move right within each separate stretch. Name it increasing, decreasing, or constant.
- Write open intervals of inputs. Keep pieces on opposite sides of a break separate.
- Give each requested behavior on its own line. Say 'and' between stretches; ∪ joins the listed stretches piece by piece.
- Local maxima and minima
- Scan the given graph for changes from rising to falling or falling to rising.
- Rising then falling identifies an isolated local maximum; falling then rising identifies an isolated local minimum.
- Also inspect flat stretches and shoulders when applying the formal nonstrict rule. Compare both sides, including any equal heights.
- Require a domain neighborhood on both sides. An end of the graph is considered separately for absolute extrema.
- Read the horizontal input as the location and the vertical output as the value.
- Give value and location in a full sentence; give the ordered pair if the question asks for the point.
- Toolkit behavior, then absolute maximum and minimum
- Review the nine toolkit shapes and their domain restrictions before using the summary table.
- Look at the whole stated domain, including included endpoint dots and any arrows or stated continuation.
- If outputs rise without bound, there is no absolute maximum; if they fall without bound, there is no absolute minimum.
- A height approached but never reached is not an absolute extremum. Check excluded hollow dots and unattained levels.
- Compare the remaining reached heights with every domain piece. Find the greatest and least reached outputs and every input producing each.
- Answer with the value and location on separate lines. A viewing-window edge does not establish a domain endpoint.
Traps (10)
- Rate of change and average rate of change
Subtracting in different orders on top and bottom flips the sign. Point 2 minus point 1 must be used for both output and input changes.
- On a graph, the average rate of change is a slope
Putting right-minus-left on top and left-minus-right on the bottom reverses the sign. Keep each input paired with its output and use one order twice.
- Average rate of change from a formula
Stopping after subtracting gives only the output change. Divide by the input change to get the average rate.
- When an endpoint is a letter, the answer is an expression
Canceling pieces of sums instead of whole multiplied factors, or forgetting the excluded endpoint after cancellation.
- The difference quotient: average rate of change from x to x + h
Adding h to the old output, treating f as a multiplier, or allowing a zero input step. Substitute x + h into the whole function formula and keep h ≠ 0.
- Difference quotient of a quadratic
Losing the middle term, squaring an outside coefficient, or forgetting that ÷ h = h. Show the full square expansion before subtracting.
- Difference quotient of a fraction
Subtracting bottoms, splitting a denominator sum, or losing the minus on the second numerator. Use a common bottom, subtract the whole second top, then divide by h.
- Increasing, decreasing, and constant
Writing the intervals in y-values, for example 'increasing from −2 to 5' because the heights run from −2 to 5. Intervals of increase and decrease are always inputs (x-values or t-values), read along the horizontal axis.
- Local maxima and minima
Saying 'the maximum is x = 1'. The maximum is the output, 2; x = 1 is where it happens. On the exam write both: 'local maximum of 2 at x = 1'.
- Toolkit behavior, then absolute maximum and minimum
Calling the highest point visible in a picture the absolute maximum when an arrow shows the graph keeps rising beyond the window. Check how the graph behaves at its ends before you name an absolute maximum or minimum.
Lesson 1 of 10
Rate of change and average rate of change
Open this lessonLeans on 20Comes back in 0
Leans on
Comes back in
No lesson links recorded.
1 In plain words
A rate of change tells you how much one quantity changes for each single unit of another. A car going 68 miles per hour adds 68 miles for every hour that passes, and a rat population growing by 40 rats per week adds 40 rats each week. The word 'per' means 'for each' and signals a rate. Gas prices in the table below rose in some years and fell in others. If you use only the values at the start and the end of a stretch of years, you get the average rate of change. It works like splitting a restaurant bill evenly: people ate different amounts, but everyone pays the total divided by the number of people.
2 Picture it
Reminder
Reminder: Dollars to cents and rounding, Signed subtraction, Division by zero
- Dollars to cents and rounding. Multiply dollars by 100: 0.196 dollars = 19.6 cents. In 0.195714..., the fourth decimal digit is 7, so the three-place rounded value is 0.196.
- Signed subtraction. Smaller minus bigger is negative: 2.41 − 2.84 = −0.43. Subtracting a negative adds its opposite: 2 − (−1) = 3.
- Division by zero. A quotient needs a nonzero denominator: 2012 − 2012 = 0, so two identical inputs cannot give this average rate.
3 Why
A total change hides how fast it happened: a $1.37 rise in gas prices over one year is very different from the same rise over seven years. Dividing by the change in input shares the total out equally, one share per unit of input, which is why the result is called an average: if the price had risen by exactly that share every year, it would land on the same final price. The units are output units per input unit because you divided dollars per gallon by years, as miles divided by hours gives miles per hour.
4 The rule
Average rate of change , with and both outputs defined.
Use the same endpoint order on top and bottom. Units are output units per input unit.
The same idea, five ways
Say 'delta y over delta x', or 'change in output per unit change in input'.
The average rate of change compares the net output change with the input change between two distinct endpoints.
The difference between two odometer readings divided by the time between them.
The same idea, other ways
A restaurant bill divided by the number of people gives the equal share per person. In the same way, a price increase divided by the years gives the equal increase per year that would produce the same final price.
total change ÷ input change
= average change per unit
Δ is the Greek capital letter delta, pronounced DEL-tuh and read 'change in'. Δy = 3.68 − 2.31 = 1.37 dollars per gallon. Δx = 2012 − 2005 = 7 years. Dividing gives dollars per gallon per year. Δf is another name for the output change; it does not change the function into a different function.
, read 'x one' or 'x sub one', names the input of point 1. names the input of point 2. A subscript is a name tag, not a power and not multiplication. and f() name the same output. On this table, = 2012 and = f(2012) = 3.68.
point 1: (2005, 2.31)
point 2: (2012, 3.68)
: input of point 2
: x multiplied by x
On f(x) = , going from x = 1 to x = 3 raises the output from 1 to 9. That is rise 8 over run 2, giving = 4. A straight ruler through the two points climbs 4 for each unit right, even though the curve changes steepness.
| Year | Average price of a gallon of gas |
|---|---|
| 2005 | $2.31 |
| 2006 | $2.62 |
| 2007 | $2.84 |
| 2008 | $3.30 |
| 2009 | $2.41 |
| 2010 | $2.84 |
| 2011 | $3.58 |
| 2012 | $3.68 |
Part 1: A negative average, even with a rise in the middle
The average compares the two ends. A price can rise in the middle and still end lower than it began. The negative sign records the net drop, rather than claiming the price fell every year.
- From 2007 to 2008 the price rises by 3.30 − 2.84 = 0.46 dollars per gallon.
- From 2007 to 2009 the net change is −0.43 dollars, so the average is negative.
Worked example
Average rate of change of a used truck's resale value
A dealership tracks the typical resale value of one model of pickup truck as it ages. Let t be the truck's age in years and V(t) be its resale value in dollars. The table gives these values.
Age t (years): 1, 3, 6, 8
Resale value V(t) ($): 38,400, 31,200, 22,800, 18,600
(a) Find the average rate of change of V on the interval [1, 6]. Give the units and say what the sign means.
(b) Find the average rate of change of V on [6, 8], and compare it with part (a).
Show the steps and the answer
- Input: t, the age in years. Output: V(t), the resale value in dollars.The units of the rate are output units per input unit, so both units are needed first.
- For (a), let with ,400, and with ,800.Working left to right, the smaller input is . Each value stays paired with its own age from the table.
- ,600 and .Both differences use the same order, second endpoint minus first, so the sign is meaningful.
- , so the average rate of change ,120.The average rate of change is , and it is defined only when Δx is not zero.
- The average rate of change on [1, 6] is ,120 dollars per year. The value fell by an average of $3,120 per year from age 1 to age 6.The inputs increase, so a negative result means the output fell overall.
- For (b), let with ,800, and with ,600. Then ,200 and .This uses the same left-to-right order on the new interval.
- , so the average rate of change ,100 dollars per year.Divide Δy by Δx and attach dollars per year.
- Compare the two rates: ,100 is closer to zero than ,120. The value still falls on [6, 8], but by about $1,020 less per year than on [1, 6].Both rates are negative, so both are net falls. The one with the smaller size is the slower fall.
Work to write
- Input t in years, output V(t) in dollars
- = −3,120 dollars per year
- Negative: the value fell an average of $3,120 per year on [1, 6]
- (b) = = −2,100 dollars per year
- The value falls more slowly on [6, 8] than on [1, 6]
Part 2: Rats per week
Count rats added for each week that passes.
- The source example is growth of 40 rats per week.
- Output: population change in rats. Input: elapsed weeks.
80 rats in 2 weeks
40 rats per week
Worked example
A population rate
This asks how many rats are added for each week. A population grows by 80 rats over 2 weeks. Find its average rate.
Show the steps and the answer
80 rats in 2 weeks
40 rats per week
- Change in output is 80 rats; change in input is 2 weeks.The problem gives both changes, so there are no endpoint outputs to subtract.
- rats per week.Dividing the total addition into two equal weekly shares gives the amount per week.
Part 3: Miles per hour
A travel rate shares a distance over elapsed hours.
- The source example is 68 miles per hour.
- Output: miles traveled. Input: hours.
136 miles in 2 hours
68 miles per hour
Worked example
A travel rate
This asks how many miles are covered per hour. A car covers 136 miles in 2 hours. Find its average rate.
Show the steps and the answer
136 miles in 2 hours
68 miles per hour
- miles per hour.Miles are the output change and hours are the input change, so divide miles by hours.
Part 4: Miles per gallon
You can compare distance with fuel instead of time.
- The source example is 27 miles per gallon.
- Output: miles traveled. Input: gallons used.
54 miles using 2 gallons
27 miles per gallon
Worked example
A fuel-use rate
This asks how many miles are covered for each gallon, rather than for each hour. A car covers 54 miles using 2 gallons. Find its rate.
Show the steps and the answer
54 miles using 2 gallons
27 miles per gallon
- miles per gallon.Distance is the output and fuel used is the input, so time does not belong in this denominator.
Part 5: Amperes per volt
You can compare two measured electrical quantities without learning a physics formula.
- The source example is current increasing by 0.125 amperes for each extra volt.
- Output: current change in amperes. Input: voltage change in volts.
0.25 amperes per 2 volts
0.125 amperes per volt
Worked example
An electrical rate
This asks how much the current increases for each extra volt. The current increases by 0.25 amperes when voltage increases by 2 volts. Find the rate.
Show the steps and the answer
0.25 amperes per 2 volts
0.125 amperes per volt
- amperes per volt.An ampere measures electrical current and a volt measures voltage. Dividing the current change by the voltage change gives the requested comparison.
Part 6: Dollars per quarter
The output can fall while the input time increases.
- The source example is a college account decreasing by $4,000 per quarter.
- A quarter of a year is three months.
−$8,000 in 2 quarters
−$4,000 per quarter
Worked example
A falling account balance
This asks how much money changes per quarter. An account loses $8,000 over 2 quarters. Find the average rate.
Show the steps and the answer
−$8,000 in 2 quarters
−$4,000 per quarter
- Change in money ,000 dollars per gallon.A loss is a negative change in the output balance.
- ,000 dollars per quarter.Divide the loss by the positive time span. Here a quarter means three months.
5 How
- Name the input and output, including their units.
- For a left-to-right calculation, call the smaller input and the larger input ; keep each output with its input.
- Find Δy = − and Δx = − , using the same order.
- Check Δx ≠ 0, then divide Δy by Δx.
- Attach output units per input unit. With inputs in increasing order, positive means a net rise and negative a net fall.
Find an average rate from the information given
- Find two distinct input values and their outputs.
- Read a table column, read a graph height, or evaluate a formula, depending on what is given.
- Subtract the two outputs and the two inputs in matching order.
- Divide and state units; keep exact fractions until a rounded answer is requested.
6 Worked example
Worked example
Average rate of change of a regional gas price, 2014 to 2021
A regional energy office records the average price of one gallon of regular gasoline each year. Let P(t) be the price in dollars per gallon in year t. The table gives these values.
Year t: 2014, 2016, 2019, 2021
Price P(t) ($/gal): 3.36, 2.14, 2.60, 3.01
(a) Find the average rate of change of the gas price from 2014 to 2021. Give units and say what the sign means.
(b) Find the average rate of change from 2016 to 2021. Explain why the signs in (a) and (b) differ, even though both intervals end in 2021.
Show the steps and the answer
- Input: t, the year, in years. Output: P(t), the price, in dollars per gallon ($gal).The units of the answer are output units per input unit, so both units are needed first.
- (a) Let with , and with .For a left-to-right calculation the smaller input is . Each price stays paired with its own year.
- and .Both differences use the same order, the later value minus the earlier value.
- , so the average rate of change is .Average rate of change = . Division is allowed because Δx is not zero.
- (a) The rate is dollars per gallon per year. The price fell by a net 5 cents per gallon per year from 2014 to 2021.The inputs are in increasing order, so a negative rate means a net fall. The price did not fall every year: it rose from 2016 to 2021. The rate describes only the overall change between the endpoints.
- (b) Let with , and with . Then and .This is the same left-to-right method on the new interval, keeping each price with its year.
- , so the rate is dollars per gallon per year, a net rise of about 17.4 cents per gallon per year.The rate is positive with the inputs in increasing order, so the price rose overall on [2016, 2021].
- The signs differ because the starting prices differ. The 2014 price of $3.36 is above the 2021 price of $3.01. The 2016 price of $2.14 is below it.An average rate of change depends only on the two endpoint values, not on the values in between.
Work to write
- Input t in years; output P(t) in dollars per gallon
- = −0.05 dollars per gallon per year
- Negative: net fall of 5 cents per gallon per year from 2014 to 2021
- (b) = = 0.174 dollars per gallon per year, a net rise
- The signs differ because P(2014) > P(2021) but P(2016) < P(2021)
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
A population rate
This asks how many rats are added for each week. A population grows by 80 rats over 2 weeks. Find its average rate.
Show the steps and the answer
80 rats in 2 weeks
40 rats per week
- Change in output is 80 rats; change in input is 2 weeks.The problem gives both changes, so there are no endpoint outputs to subtract.
- rats per week.Dividing the total addition into two equal weekly shares gives the amount per week.
Rung 2 of 5
Average yearly change in gas prices from a table, 2016 to 2023
A state consumer office reports the average price of one gallon of regular gasoline in selected years. Let P(t) be the price in dollars per gallon in year t. The table gives these values.
Year t: 2016, 2018, 2020, 2023
Price P(t) ($/gal): 2.27, 2.85, 2.24, 3.53
(a) Find the average rate of change of P from 2016 to 2023. Give units and say what the sign means.
(b) Find the average rate of change of P from 2018 to 2020. Give units and say what the sign means.
Show the steps and the answer
- Input: t, the year. Output: P(t), the price in dollars per gallon. The rate will be in dollars per gallon per year.The units of an average rate of change are output units per input unit, so both quantities and their units must be named first.
- (a) Let with , and with .For a left-to-right calculation the smaller input is . Each price stays with its own year.
- and .Both differences use the same order, later minus earlier, so the quotient has the correct sign.
- , so the average rate of change .Average rate of change = , which is defined only when the inputs differ.
- The rate is 0.18 dollars per gallon per year. It is positive, so the price rose overall: on average it went up 18 cents per gallon each year from 2016 to 2023.The inputs are in increasing order, so a positive rate means a net rise in the output.
- (b) Let with , and with . Then and .These are the same steps with the new endpoints, again taking later minus earlier on both top and bottom.
- , so the average rate of change dollars per gallon per year.The difference in price is divided by the difference in years.
- The rate is negative, so the price fell overall from 2018 to 2020: on average it dropped about 30.5 cents per gallon each year.With the inputs in increasing order, a negative rate means a net fall in the output.
Work to write
- Input t = year; output P(t) in dollars per gallon
- 0.18 dollars per gallon per year; positive, so the price rose on average
- −0.305 dollars per gallon per year; negative, so the price fell on average
Rung 3 of 5
Average rate of change of a fuel price from 2015 to 2019
A small delivery company keeps a fuel log of the average price it paid for one gallon of regular gasoline each year. Let P(t) be the price in dollars per gallon in year t. The table gives these values.
Year t: 2015, 2017, 2018, 2019
Price P(t) ($/gal): 2.62, 2.48, 2.71, 3.02
Find the average rate of change of P over the four years from 2015 to 2019. Give units and say what the sign means.
Show the steps and the answer
- Input: t, the year (years). Output: P(t), the price of gasoline (dollars per gallon).The units of the rate of change are output units per input unit, so both must be named first.
- Let with . Let with .For a left-to-right calculation the smaller input is . Each output stays with its own input. The 2017 and 2018 values are not endpoints of the interval, so they are not used.
- dollars per gallon. years.The same endpoint order (2019 first, then 2015) is used on top and bottom, so the signs are consistent.
- , so the average rate of change .The rule is defined only when the inputs differ. Here they do.
- Average rate of change dollars per gallon per year. It is positive.The inputs are in increasing order, so a positive rate means a net rise in price from 2015 to 2019. The dip in 2017 does not change the net result, because only the endpoints enter the calculation.
Work to write
- Input t in years; output P(t) in dollars per gallon
- 0.10 dollars per gallon per year
- Positive: the price rose overall from 2015 to 2019
Rung 4 of 5
How fast a game console's price falls
A retailer tracks the price of a new handheld game console. Let t be the number of months since launch and P(t) be the price in dollars. The table gives these values.
Months since launch t: 2, 6, 14, 20
Price P(t) ($): 449, 425, 377, 335
(a) Find the average rate of change of P on the interval [2, 14]. Give units and say what the sign means.
(b) Find the average rate of change of P on [14, 20]. Over which interval did the price fall faster on average?
Show the steps and the answer
- Input: t, the time since launch in months. Output: P(t), the price in dollars.The units of the rate are output units per input unit. Here that is dollars per month.
- For (a), let and . Let and .Going left to right, the smaller input is . Each price stays paired with its own month.
- and .Both differences subtract in the same order: second endpoint minus first.
- , so the average rate of change .The average rate of change is , and it is defined only when Δx ≠ 0.
- The rate on [2, 14] is dollars per month. The sign is negative, so the price had a net fall. On average it dropped $6 each month.The inputs are in increasing order, so a negative rate means a net decrease.
- For (b), let and . Then and .These are the same steps on the new interval, keeping the same endpoint order on top and bottom.
- , so the rate dollars per month.Divide Δy by Δx and attach dollars per month.
- Compare: , so the price fell faster on average over [14, 20].Both rates are negative. The rate with the larger size shows the steeper average drop.
(a) 449 + (−6)(12) = 449 − 72 = 377 = P(14). ✓
(b) 377 + (−7)(6) = 377 − 42 = 335 = P(20). ✓
Work to write
- Input t in months, output P(t) in dollars
- Average rate of change = = −6 dollars per month
- Negative, so the price had a net fall of $6 per month on average
- [14, 20]: = = −7 dollars per month
- The price fell faster on average over [14, 20]
Rung 5 of 5
A rate from clock times across an hour
A faucet adds 30 gallons from 7:52 p.m. to 8:04 p.m. Find the average gallons added per minute; first find how many minutes actually passed.
Show the steps and the answer
- From 7:52 p.m. to 8:00 p.m. takes minutes.An hour contains 60 minutes, so count forward to the next hour.
- From 8:00 p.m. to 8:04 p.m. takes 4 more minutes. Total elapsed time: minutes.Both spans belong to the same continuous elapsed-time interval; add them rather than subtracting clock digits as decimals.
- Average rate gallons per minute.Gallons are the output change and elapsed minutes the input change; divide top and bottom by 6 to reduce.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Remember 'output over input' and 'same trip, same order'. Write the units as and read the bar as 'per'.
- A rate is also negative if output rises while input falls: reversing both endpoint orders changes both signs and leaves the ratio unchanged.
- A subscript names a point. A superscript tells you a power.
- If both outputs match and the inputs differ, the average rate is 0; the function may still move up and down between those endpoints.
7 The trap
Subtracting in different orders on top and bottom flips the sign. Point 2 minus point 1 must be used for both output and input changes.
Lesson 2 of 10
On a graph, the average rate of change is a slope
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
On a graph, each input and its output make a point: the input tells you how far across, the output tells you how high. To find the average rate of change between two inputs, locate the points on the graph at those two inputs and connect them with a straight ruler line. The average rate of change is the slope of that line. Picture a hiking trail between two signposts: the trail may wiggle up and down, but the ruler line ignores the wiggles and measures only how much height you gained overall for each step east.
2 Picture it
Reminder
Reminder: Signed division, Subtracting a negative, Slope
- Signed division. Same signs divide to a positive; different signs divide to a negative. = 1 and = −1.
- Subtracting a negative. 2 − (−1) = 2 + 1 = 3. Parentheses keep the negative input together.
- Slope. Rise over run compares two points: a rise of 9 over a run of 3 gives = 3.
3 Why
The average rate of change formula is the slope formula in disguise, because on a graph the output f(x) is the height y. So a connecting line rising to the right has a positive slope, a falling one a negative slope, and a flat one zero. What happens between the two points never enters the formula, which is why only the endpoints matter. A curved graph can rise near one endpoint yet have a negative average over the whole interval.
4 The rule
For [left end, right end], with a < b and both outputs defined, average rate .
This is the slope of the straight ruler through (a, f(a)) and (b, f(b)).
The same idea, five ways
Say 'the slope of the line joining the two graph points'.
The average rate compares the ending height with the starting height, per horizontal unit.
- Graph words: connect the two endpoint points with a straight ruler.
A ruler laid between two trail signposts measures the overall climb per step east.
The same idea, other ways
To read g(−1), begin at −1 on the horizontal axis, go vertically to the solid curve, and read height 4. The point (−1, 4) and the notation g(−1) = 4 say the same thing.
A hiker can climb to a high point in the middle and finish below the starting point. On this curve, the endpoints are at heights 4 and 1. The ruler drops 3 over a horizontal move of 3, so the average rate is −1.
For a straight line the average rate stays the same on every interval because the line has the same steepness throughout. A curve can give different averages: gives 4 on [1, 3] and 8 on [3, 5].
on [1, 3]: = 4
on [3, 5]: = 8
Part 1: Reading a value off a graph
A graph is another way to store input-output pairs. Go from the input axis to the curve before reading the output axis. Count grid squares using the printed scale; a square can represent more than one unit. A height between grid lines is an estimate.
- g(t) is the output at input t, rather than g multiplied by t.
- A point (t, y) on the graph means g(t) = y.
Worked example
Reading two heights on a downward parabola, then finding the slope
The solid graph of f(x) = −(x + 1 + 4 is drawn on a grid where each square is 1 unit in both directions. Its highest point is (−1, 4). The graph passes exactly through the grid points (−2, 3) and (2, −5). Read the graph to find the average rate of change of f over [−2, 2]. Say what the sign means.
Show the steps and the answer
- Locate (left end) and (right end) on the horizontal axis.The interval [a, b] = [−2, 2] has a = −2 < b = 2. These two inputs are where the heights must be read.
- From , move vertically to the solid curve. It meets the curve 3 squares above the x-axis, so .The height of the graph at an input is the output. The point (−2, 3) lies exactly on a grid point, so no estimate is needed.
- From , move vertically to the solid curve. It meets the curve 5 squares below the x-axis, so .The point (2, −5) lies exactly on a grid point. It is below the axis, so the height is negative.
- Rise . Run .Subtract right minus left for both outputs and inputs, in the same order.
- Average rate .The average rate of change is rise divided by run. This is the slope of the ruler through (−2, 3) and (2, −5).
- Interpret: the sign is negative, so over the function falls overall. On average, f drops 2 units for each 1 unit increase in x.A negative slope means the right endpoint is lower than the left endpoint. The graph rises briefly to its top at x = −1, but the overall change across the interval is a decrease.
Work to write
- f(−2) = 3 (read from graph)
- f(2) = −5 (read from graph)
- Average rate = =
- Negative: f decreases on average by 2 units per unit of x on [−2, 2]
Part 2: Average speed from Anna's table
The table stores distance from home, so the starting 10 miles must be subtracted. In this outward-driving example, the change is also the distance driven during the chosen hours. If a trip turns back, distance from home alone does not measure all miles driven.
- Average speed over [0, 6] is 47 miles per hour.
- Over [2, 3], it is 63 miles per hour.
- The chosen interval can change a travel average.
Worked example
Average speed of a cyclist between two times in a distance table
A cyclist's total distance from the trailhead is recorded at several times.
Time t (minutes): 10, 25, 40, 55
Distance d(t) (km): 3.2, 8.0, 12.5, 16.1
Find the cyclist's average speed on the interval [10, 40]. Give it in km per minute and in km per hour, and say what the sign means.
Show the steps and the answer
- Find the interval endpoints in the time row. The left end is and the right end is . Both values appear in the table, and 10 < 40.The rule needs a left input and a right input with a < b, and both outputs must be known.
- Read the distance under each time: km and km. The points are (10, 3.2) and (40, 12.5).These are the heights of the two points that the straight ruler would join on a distance–time graph.
- Find the rise as the right output minus the left output: km. Find the run as the right input minus the left input: minutes.The numerator of is the change in distance and the denominator is the change in time. Both are taken right minus left.
- Divide the rise by the run: km per minute.Average rate of change is rise over run, which is the slope of the line through (10, 3.2) and (40, 12.5). The units are km per minute.
- Convert to km per hour: km.There are 60 minutes in an hour, so the number of km per hour is 60 times the number of km per minute.
- Interpret the sign. The rate is positive, so the cyclist's distance from the trailhead increased over the interval.A positive slope means the output rises as the input increases.
Work to write
- a = 10, b = 40
- d(10) = 3.2, d(40) = 12.5
- average speed = =
- = = 0.31 km/min
- 0.31 × 60 = 18.6 km/h
- Positive rate: the distance from the trailhead increased.
Part 3: A line compared with a curve
A straight line rises by the same amount for each equal step right. It therefore gives the same average rate on every interval. A curve can have different steepness in different places, so its average may depend on the interval.
- For f(x) = 2x + 5 the average rate is 2 on every pair of distinct inputs.
- For f(x) = , the averages on [1, 3] and [3, 5] are 4 and 8.
Worked example
Average rate of change of a straight-line graph
The solid graph of y = f(x) is a straight line. Reading the grid, it passes through the points (−2, 7), (2, 1) and (4, −2). Find the average rate of change of f on the interval [−2, 4], and then on [2, 4]. Interpret the sign, and explain why the two answers agree.
Show the steps and the answer
- Locate the endpoints of the first interval, and , on the horizontal axis.The interval [a, b] = [−2, 4] has left end a = −2 and right end b = 4, with a < b.
- Read the heights above those inputs. At the graph is at height 7, so . At it is at height , so .The average rate uses the outputs at the two ends of the interval. Both points sit on grid intersections, so no estimating is needed.
- Find the rise and the run. Rise . Run .The rule subtracts right minus left in both places, so the order matches.
- Divide: average rate .Average rate = is the slope of the segment joining (−2, 7) and (4, −2).
- Repeat for [2, 4]. and . Rise . Run . Average rate .This is the same method on a different interval of the same line.
- Interpret the result. The rate is negative, so f falls 1.5 units for every 1 unit increase in x. Both intervals give .A straight line has one constant slope. A ruler through any two of its points lies along the line itself, so every interval gives the same average rate.
Work to write
- average rate on [−2, 4] = = = = −1.5
- f(2) = 1, so average rate on [2, 4] = = = −1.5
- negative: f decreases 1.5 units per unit of x
- same answer on both intervals because a straight line has constant slope
5 How
- Locate both interval endpoints on the horizontal axis.
- At each input, move vertically to the solid graph and read its height. Count grid steps; estimate if it lies between lines.
- Subtract right height minus left height, then right input minus left input.
- Divide rise by run and interpret the sign.
Read an average rate from a graph
- Read two curve heights before doing arithmetic.
- Write the paired points or function values so the endpoint order is visible.
- Compute vertical change divided by horizontal change.
- Describe the average net rise or fall per unit.
6 Worked example
Worked example
Average rate of change of a parabola from its graph on [−1, 3]
The graph of f(x) = − 1 is drawn on a grid where each square is 1 unit. Read the graph to find the average rate of change of f over [−1, 3]. Say what the sign means.
Show the steps and the answer
- Locate the endpoints on the horizontal axis: on the left and on the right.The interval [a, b] runs from the left end to the right end, so a = −1 and b = 3 with a < b.
- From , move vertically to the graph. It meets the curve on the x-axis, so . The point is .The output is the height of the graph above the input. Here the height lands exactly on a grid line, so no estimate is needed.
- From , move vertically to the graph. Count up 8 grid steps, so . The point is (3, 8).Counting whole grid squares gives the exact height. Check with the formula: − 1 = 8.
- Rise . Run .Use right minus left in both the numerator and the denominator. Subtracting −1 is the same as adding 1.
- Average rate . The sign is positive.The rate is rise divided by run. A positive slope means the ruler through the two points goes up from left to right.
Work to write
- rise = 8 − 0 = 8, run = 3 − (−1) = 4
- average rate = = 2
- Positive: f rises 2 units per unit of x on average over [−1, 3]
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Reading two heights on a shifted parabola to find a negative average rate
The solid graph of f(x) = (x − 1 − 3 is drawn on a grid where each square is 1 unit in both directions. Its lowest point is (1, −3). The graph passes exactly through the grid points (−1, 1) and (2, −2). Read the graph to find the average rate of change of f over [−1, 2]. Say what the sign means.
Show the steps and the answer
- Locate the endpoints and on the horizontal axis. The left end is and the right end is .The interval [a, b] tells us which two inputs to use, and a < b.
- From , move vertically to the solid curve. It meets the curve 1 square above the x-axis, so .The height of the graph above an input is the output at that input. Here the curve crosses exactly at a grid point, so no estimate is needed.
- From , move vertically to the solid curve. It meets the curve 2 squares below the x-axis, so .A point below the x-axis has a negative height. Counting squares downward gives a negative output.
- Rise . Run .Both differences are taken right end minus left end, in the same order.
- Average rate .The average rate of change is rise divided by run. It is the slope of the straight ruler through (−1, 1) and (2, −2).
- Interpret the result: the rate is negative, so f decreased overall on . On average it dropped 1 unit for each 1 unit of x.A negative slope means the right end is lower than the left end. The curve does fall and then rise inside the interval, but the average rate uses only the two endpoints.
Work to write
- f(−1) = 1 and f(2) = −2 (read from the graph)
- Average rate =
- Negative, so f decreased overall on [−1, 2], by 1 unit per unit of x on average
Rung 2 of 4
A straight line has the same average rate on any interval
The graph of the straight line f(x) = −x + 2 is drawn on a grid where each square is 1 unit in both directions. The line passes exactly through the grid points (−4, 4), (0, 2) and (2, 1). Read the graph to find the average rate of change of f over [−4, 2]. Then find it over [0, 2] and compare the two results. Say what the sign means.
Show the steps and the answer
- For , locate (left end) and (right end) on the horizontal axis.The rule uses a = −4 as the left input and b = 2 as the right input, with a < b.
- From , move vertically to the line. It meets the line 4 squares above the axis, so . From , the line is 1 square above the axis, so .The height of the graph at each input is the output we need. Both points sit exactly on gridlines, so no estimate is needed.
- Rise . Run .Subtract right minus left in both the outputs and the inputs, so the signs stay consistent.
- Average rate .The average rate is rise divided by run. This is the slope of the ruler through (−4, 4) and (2, 1).
- For [0, 2], read and . Then rise , run , and the average rate .Use the same steps on a different interval. This tests whether the rate depends on where we measure.
- Compare: both intervals give . The rate is negative, so f decreases. On average, it falls unit for every 1 unit increase in x.A straight line has a single, constant slope. Every ruler through two of its points lies along the line itself, so every interval gives the same average rate.
Work to write
- f(0) = 2, so = = −
- Same rate on both intervals because the graph is a straight line; negative means f is decreasing
Rung 3 of 4
Average rate of change read from a graph with a scaled vertical axis
A solid curve y = f(x) is drawn on a grid. Each horizontal square is 1 unit and each vertical square is 2 units. At x = −2 the curve crosses exactly the gridline 5 squares above the x-axis. At x = 4 the curve passes halfway between the gridlines 1 and 2 squares below the x-axis. Find the average rate of change of f on [−2, 4] and say what its sign means.
Show the steps and the answer
- Mark the interval endpoints on the horizontal axis: (left) and (right).The rule uses a < b, so a is the left end and b is the right end of [−2, 4].
- From , move vertically to the solid curve. It sits on the gridline 5 squares up, so .Each vertical square is worth 2 units. The height must be converted from squares to units.
- From , move vertically to the solid curve. It lies halfway between 1 and 2 squares below the axis, which is squares. So .When the point falls between gridlines, estimate the fraction of a square. Below the axis means a negative height.
- Rise . Run .Subtract right minus left in both the numerator and the denominator so the order matches.
- Average rate .Rise divided by run gives the slope of the ruler through (−2, 10) and (4, −3).
- Interpret the sign: the value is negative, so on average f decreases by about 2.17 units for each 1 unit increase in x over .A negative slope means the ruler line falls from left to right.
Work to write
- f(−2) = 10 (5 squares × 2)
- f(4) = −3 (−1.5 squares × 2)
- ≈ −2.17; negative, so f decreases on average over [−2, 4]
Rung 4 of 4
Average speed of a road trip from a distance table
A car's distance from home, d(t) in miles, was recorded t hours after it left. The table gives t = 0, 1.5, 4 and 5 hours with distances 0, 84, 220 and 280 miles. Find the average speed of the car on the interval [1.5, 5] and say what the sign means.
Show the steps and the answer
- Locate the interval endpoints in the input row: (left end) and (right end).The average rate on [a, b] uses only the two endpoint inputs, with a < b. The entry at t = 4 lies inside the interval and is not needed.
- Read the output under each endpoint: and .Each table column pairs an input with its output. These two pairs are the points (1.5, 84) and (5, 280) that the ruler would pass through on a graph.
- Subtract right minus left in both rows. Rise: miles. Run: hours.The formula subtracts in the same order, right end minus left end, on top and on the bottom.
- Divide rise by run: miles per hour.Average rate of change is change in output per unit change in input. Its units are miles per hour, so the result is an average speed.
- Interpret the sign. The rate is positive, so the distance from home increased.A positive slope means the output rises as the input increases. The car was moving away from home at an average of 56 miles each hour.
Work to write
- a = 1.5, b = 5
- d(1.5) = 84, d(5) = 280
- average speed = =
- = = 56 miles per hour
- Positive: the distance from home increased by 56 miles per hour on average
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Letters are name tags. In [a, b], a is the left input and b the right input; and can name those same jobs.
- Write what the rate means: 'drops 1 output unit per input unit on [−1, 2]' explains −1.
- The endpoints must give actual function outputs; a hollow dot by itself leaves that input undefined.
7 The trap
Putting right-minus-left on top and left-minus-right on the bottom reverses the sign. Keep each input paired with its output and use one order twice.
Lesson 3 of 10
Average rate of change from a formula
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
When the function is given as a formula, you build a small table of your own. Plug the left endpoint into the formula to get its output, plug the right endpoint in to get its output, and then subtract and divide exactly as before. A formula is like a recipe: feed it an input and it cooks up the output. You only have to run the recipe twice, once for each end of the interval. Write the whole input in parentheses, especially if it is negative. Fractions show up often, so keep them as fractions until the end.
2 Picture it
Reminder
Reminder: Common denominators, Dividing by a whole number, Simplifying a fraction, Whole numbers as fractions
- Common denominators. When the smaller bottom divides the bigger one, use the bigger bottom: = . Otherwise the product of the bottoms works.
- Dividing by a whole number. ÷ 4 = · . Division by a nonzero number means multiplication by its reciprocal.
- Simplifying a fraction. Divide top and bottom by the same nonzero number: = , using ÷ 2 in both.
- Whole numbers as fractions. 4 = = , so a whole number can be renamed to match a fraction's bottom.
3 Why
The formula supplies the output at each allowed input, so evaluating it at the two endpoints gives the points you would read off a perfect graph. Exact fractions avoid early rounding errors. For example, is exact, while −0.11 differs by about 0.001. Evaluate first, subtract next, and divide last, so the output change and the rate remain separate quantities. The units come from the comparison: force in newtons divided by distance in centimeters gives newtons per centimeter.
4 The rule
On [left end, right end], with a < b and both outputs defined, average rate .
Evaluate the two endpoint outputs first, then subtract and divide. Preserve all nonzero-bottom and square-root restrictions.
The same idea, five ways
Say 'evaluate both ends, subtract the outputs, divide by the input span'.
A formula gives the two endpoint outputs needed for the same average-rate calculation.
- f(a): output at the left input; f(b): output at the right input
Run one recipe with two different ingredients, then compare the results per change in the ingredient.
The same idea, other ways
The force recipe gives F(2) = and F(6) = . Those are two outputs, not two rates. Put them in the endpoint table before computing the changes.
The push changes by newton over 4 centimeters. Dividing by 4 turns the whole-interval change into newton per centimeter.
For f(x) = 2 − , the input −3 makes f(−3) = 2 − (−3 = −7. Squaring the input happens before the outside subtraction. This prevents a sign mistake before the rate calculation begins.
Part 1: Negative inputs in a square formula
A negative input is one complete number. Keep it in parentheses so a square acts on the whole number. The minus outside then subtracts that positive square.
- (−3 = 9, while − means −() = −9.
- For 2 − , the outside subtraction remains outside after substitution.
Worked example
A negative endpoint needs parentheses
This asks for the average output change per input unit, using one negative input. Find the average rate of f(x) = 2 − on [−3, 1].
Show the steps and the answer
- .The whole input is −3. Squaring (−3) gives (−3)(−3) = 9; the outside subtraction stays outside.
- .Evaluate the other endpoint in the same formula.
- Output change: .Subtract the whole starting output; taking away a negative adds its opposite.
- Input change: .The endpoint order must match the output subtraction.
- .Dividing the net change 8 by the span 4 gives the change per input unit.
Part 2: Negative inputs in a cube formula
A cube multiplies the same number three times. Three negative factors give a negative result. Keep the multiplication term separate and handle its sign too.
- −2(−2) = +4, so these two contributions have opposite signs.
Worked example
A harder negative endpoint with a cube
This asks for the average output change per input unit when the formula has a cube. Find the average rate of f(x) = − 2x on [−2, 1].
Show the steps and the answer
- .Three factors of −2 give −8; multiplying −2 by −2 gives +4.
- .Do the power and multiplication before subtracting.
- Output change: .Subtracting the negative starting output adds 4.
- Input change: .The input subtraction uses the same endpoint order.
- .A net rise of 3 over an input span of 3 averages 1 per unit.
5 How
- Check that both inputs are allowed: no bottom may be zero, and a real square root needs a nonnegative inside.
- Evaluate f(a), placing the whole input in parentheses at every variable position.
- Evaluate f(b) the same way.
- Subtract f(b) − f(a). If fractions occur, make their bottoms match first.
- Divide by b − a. Simplify exact fractions and attach units.
Build the endpoint table from a formula
- Check endpoint restrictions.
- Evaluate the formula twice using powers before multiplication, then addition and subtraction.
- Compute the output difference with parentheses around a negative starting output.
- Divide by the matching input difference and keep the result exact.
6 Worked example
Worked example
Average rate of change of the electric force as two charges move apart
Two small charged spheres repel each other. The size of the force between them is F(r) = newtons, where r is the distance between the spheres in meters. Find the average rate of change of F on the interval [2, 4]. Give an exact answer with units.
Show the steps and the answer
- Check the inputs. For . For . There is no square root, and 2 < 4.Both endpoint outputs must be defined, and the bottom of a fraction may not be zero.
- Evaluate .Putting the input in parentheses gives the left-end output.
- Evaluate .The right-end output is found the same way and simplified.
- Subtract: .Fractions can be subtracted only after their bottoms match. Here 9 is rewritten as .
- Divide by : N per m.The average rate is the change in output divided by the change in input. Its units are newtons per meter.
Work to write
- r = 2 and r = 4 both give a nonzero bottom
- Average rate = = − N per m
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
A line from a formula
This asks for the average output change per input unit using a formula. Find the average rate of f(x) = 6x − 7 on [1, 4].
Show the steps and the answer
- ; .Run the formula once for each endpoint input.
- Output change: .Subtract the whole starting output; subtracting −1 adds 1.
- Input change: .Use the same endpoint order as the outputs.
- .Divide the output change by the nonzero input span.
Rung 2 of 5
Average rate of change of a ball's height on [1, 4]
A ball is thrown upward. Its height above the ground is h(t) = −5(t − 2 + 25 meters, where t is the time in seconds after the throw, for 0 ≤ t ≤ 4. Find the average rate of change of h on the interval [1, 4]. Give an exact value with units.
Show the steps and the answer
- Check the inputs and . The formula has no fraction bottom and no square root. Both values lie in , so both outputs are defined.The average rate needs both endpoint outputs to exist. A square formula has no zero-bottom or root restriction, so only the stated time range matters.
- Evaluate .Putting the input in parentheses keeps the order right. We square (−1) first, then multiply by −5.
- Evaluate .The right-end output is found the same way as the left-end output.
- Subtract: .The top of the rate is the change in output, right end minus left end. Here it is a change in height of −15 meters.
- Divide by : . Attach units: meters per second.Average rate = . The output is in meters and the input is in seconds.
Work to write
- Both inputs t = 1 and t = 4 are allowed (0 ≤ t ≤ 4; no bottoms or roots)
- Average rate of change = −5 meters per second
Rung 3 of 5
Parentheses for a negative endpoint
This asks for the average output change per input unit, using one negative input. Find the average rate of f(x) = 2 − on [−3, 1].
Show the steps and the answer
- .The whole input is −3. Squaring (−3) gives (−3)(−3) = 9; the outside subtraction stays outside.
- .Evaluate the other endpoint in the same formula.
- Output change: .Subtract the whole starting output; taking away a negative adds its opposite.
- Input change: .The endpoint order must match the output subtraction.
- .Dividing the net change 8 by the span 4 gives the change per input unit.
Rung 4 of 5
Average rate of change of an inverse-square force on [2, 5]
The magnetic force between two magnets r centimeters apart is modeled by F(r) = newtons, for r > 0. Find the average rate of change of F on the interval [2, 5]. Give an exact value with units.
Show the steps and the answer
- Check the inputs: gives bottom and gives bottom . Neither bottom is zero, and both inputs satisfy r > 0.Both endpoint outputs must be defined before the formula can be used, and F has a variable in the bottom.
- Evaluate the left endpoint: newtons.Putting the whole input in parentheses at the variable position makes sure the input is squared correctly.
- Evaluate the right endpoint: newtons.The right endpoint b = 5 is evaluated the same way as the left endpoint.
- Subtract in the order right minus left: newtons.The numerator is f(b) − f(a). Both outputs are whole numbers, so no common bottom is needed.
- Divide by the change in input: , so the average rate newtons per centimeter.The average rate is the change in output divided by the change in input. The units are output units per input unit.
Work to write
- Both inputs are allowed: (2 = 4 ≠ 0 and (5 = 25 ≠ 0
- Average rate = = −28 newtons per centimeter
Rung 5 of 5
A negative endpoint with a cube
This asks for the average output change per input unit when the formula has a cube. Find the average rate of f(x) = − 2x on [−2, 1].
Show the steps and the answer
- .Three factors of −2 give −8; multiplying −2 by −2 gives +4.
- .Do the power and multiplication before subtracting.
- Output change: .Subtracting the negative starting output adds 4.
- Input change: .The input subtraction uses the same endpoint order.
- .A net rise of 3 over an input span of 3 averages 1 per unit.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Before using the rate formula, write a tiny endpoint table so the two inputs stay paired with their outputs.
- Use parentheses as a seat belt around every substituted input and every negative output you subtract.
- A fraction bottom is also called a denominator. To simplify, divide both its top and bottom by the same nonzero number.
7 The trap
Stopping after subtracting gives only the output change. Divide by the input change to get the average rate.
Lesson 4 of 10
When an endpoint is a letter, the answer is an expression
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Sometimes one end of the interval is a letter, like [0, a] or [5, a]. You follow exactly the same steps, but the letter stays a letter, so the answer is an expression such as a + 7 instead of a single number. That expression is a reusable shortcut: put in any allowed endpoint for a and it gives the average rate of change, with no new work. Think of a taxi fare formula: once you have it, you can price different trip lengths. Here you are building the rate formula rather than the fare formula. Factoring means rewriting a sum as multiplication; that can reveal a whole factor to cancel.
2 Picture it
Reminder
Reminder: Sum-and-product factoring, Difference of squares, Solving a one-step equation, Canceling a common factor
- Sum-and-product factoring. (a + p)(a + q) = + (p + q)a + pq. For + 2a − 35, choose p = 7 and q = −5.
- Difference of squares. − 4 = (b − 2)(b + 2), since the +2b and −2b terms cancel when multiplied out.
- Solving a one-step equation. In b + 3 = 11, subtract 3 from both sides to get b = 8, then substitute 8 back into the equation.
- Canceling a common factor. = a + 3 requires a ≠ 0. Canceling reverses multiplication, not addition.
3 Why
A letter stands for a number you have not picked, so arithmetic still applies. For the harder example, (a + 7)(a − 5) multiplies out to − 5a + 7a − 35 = + 2a − 35. This directly proves the factorization. The denominator a − 5 is then a factor of the whole numerator, so it cancels when a ≠ 5. At a = 5 the original rate still divides by zero. The matching-factor method works for these polynomial examples; other formulas can require fraction arithmetic or a different simplification.
4 The rule
For a fixed input 5 and an endpoint a, rate , with and both outputs defined.
On [5, a], a > 5; if a < 5, use the sorted interval [a, 5]. Factor a polynomial numerator before canceling a matching whole factor.
The same idea, five ways
Say 'the endpoint is a number I have not chosen yet'.
The average rate can be an expression in the endpoint letter; choosing an endpoint then gives a numerical rate.
- [5, a] for a > 5; [a, 5] for a < 5
A reusable taxi price formula works for many trip lengths; a reusable rate formula works for many endpoints.
The same idea, other ways
For f(x) = + 2x − 8, start at 5. Read the drawn columns as input endpoint above average rate. At a = 7, the column gives 14 because = 14. Each column follows the expression a + 7; the worked algebra below explains why the same shortcut serves every allowed endpoint.
A taxi price card accepts a chosen trip length. In the same way, the rate expression a + 7 accepts a chosen endpoint. Choosing a = 6 gives 13; choosing a = 8 gives 15. The endpoint letter names a number, rather than an instruction to solve yet.
The product (a + 7)(a − 5) gives + 2a − 35 when multiplied out. This makes the matching whole factor a − 5 visible. Canceling then means dividing that factor by itself, which gives 1 when it is nonzero.
a ≠ 5
Part 1: A letter becomes a number when you choose it
A letter endpoint allows many numerical intervals to be described at once. A rate table can show the pattern before you rebuild it algebraically.
- For f(x) = + 2x − 8 starting at 5, rate = a + 7.
- x, t, a, and b are names; their role is determined by the formula and the question.
Worked example
A letter names an endpoint number
This asks for one numerical average before rebuilding all endpoints at once. Take a = 7 in f(x) = + 2x − 8 on [5, a].
Show the steps and the answer
- The endpoint interval becomes [5, 7], with and .Choosing a = 7 gives a numerical value to the endpoint letter.
- .The ordinary endpoint formula still applies; the rate table highlights this result under input 7.
Part 2: A three-term numerator needs a factoring puzzle
After evaluating and subtracting, + 2a − 35 needs two factors. Find numbers that multiply to −35 and add to 2. Check the product before canceling.
- 7 · (−5) = −35 and 7 + (−5) = 2.
- The original rate excludes a = 5.
Worked example
Average rate of change on [5, a] for a quadratic, then solving for a
Let f(x) = − 4x + 1, which can also be written f(x) = (x − 2 − 3. Consider the interval [5, a], where a > 5.
(1) Write the average rate of change of f on [5, a] as a simplified expression in a.
(2) Find the value of a for which the average rate of change on [5, a] equals 9.
Show the steps and the answer
- Evaluate the fixed endpoint: .The input 5 is a number, so its output is a number. It is one of the two outputs in the difference quotient.
- Substitute the letter: .The other endpoint is the letter a. Replacing x with a gives the second output as an expression.
- Write the quotient: rate , with .Average rate of change is the change in output over the change in input. Both differences take the same order: a first, then 5. The denominator cannot be zero, so a ≠ 5. This also follows from the condition a > 5.
- Factor the numerator: . Check by multiplying back: . Two numbers that multiply to −5 and add to −4 are −5 and +1. Multiplying back confirms the factorization before anything is canceled.
- Cancel the common factor: , for .The factor (a − 5) multiplies the whole numerator, so it may be canceled. The restriction a ≠ 5 comes from the original quotient and stays in place.
- Set the rate equal to 9 and solve: , so .The simplified expression gives the rate for every allowed a. Setting it equal to the given rate leaves a linear equation.
- Check the endpoint. The value satisfies a > 5 and . In the original quotient, , and . Any solution must be checked against the original restrictions and the original unsimplified quotient, not only the simplified expression.
Work to write
- f(5) = 6
- rate = , a ≠ 5
- rate = a + 1, a ≠ 5
- a + 1 = 9 ⇒ a = 8
- Check: = 9 ✓
Part 3: Working backward from a given rate
Evaluate means an input is given and you find the output. Solve means a target is given and you find the input that produces it. First build the rate expression, then solve for the endpoint that gives the target rate.
- A target rate produces an equation for the endpoint.
- Check the candidate in the original quotient, not only the shortened expression.
- A canceled denominator still leaves an excluded input.
Worked example
A given rate of change that leads to an endpoint left of 5
Let f(x) = + 2x − 6, which can also be written f(x) = (x + 1 − 7. Consider the interval whose endpoints are 5 and a, where a ≠ 5.
(1) Write the average rate of change of f between 5 and a as a simplified expression in a.
(2) Find the value of a for which this average rate of change equals 4. Write the interval in sorted order and check your answer in the original quotient.
Show the steps and the answer
- The fixed numerical endpoint is evaluated first, so one output is a plain number.
- Substituting the letter a for x gives the other output as an expression. It is defined for every real a.
- rate , with Average rate of change is the change in output over the matching change in input. Both differences take the same order, a first and 5 second. The denominator cannot be zero, so a ≠ 5.
- Factor: . Multiply back to verify: We need two numbers with product −35 and sum 2. These are 7 and −5. Multiplying back confirms the factoring.
- rate , for (a − 5) multiplies the whole numerator, so it can be canceled with the denominator. The restriction a ≠ 5 comes from the original quotient and is kept.
- Set , so .The rate is given as 4, so set the simplified expression equal to 4 and solve. The result a = −3 satisfies a ≠ 5.
- Since , the sorted interval is .When the letter endpoint is less than 5, the interval is written from smaller to larger. The quotient gives the same value in either order.
- Check in the original quotient: , so Checking the endpoint in the unsimplified quotient confirms that the cancellation and the solving are correct.
Work to write
- f(5) = 29
- rate = = , a ≠ 5
- rate = a + 7, a ≠ 5
- interval [−3, 5]
- check: = = 4
Part 4: Working backward when the rate contains a fraction
First combine the function outputs into one fraction. Dividing by the input difference can cancel a whole factor, leaving a rate equation you solve by doing the same multiplication to both sides.
- For g(x) = starting at 3, rate = , with b ≠ 0 and b ≠ 3.
- Target rate −1 gives b = 4.
Worked example
Work backward with a fraction
This asks for an endpoint giving a specified average rate. Let g(x) = . Starting at 3, find b > 3 so the average rate on [3, b] is −1.
Show the steps and the answer
- Require for g(b), and for the input change. ; .Both the function output and the rate quotient need nonzero bottoms.
- .Write the whole number 4 over bottom b by multiplying it by = 1.
- .Multiplying −4 through the parentheses gives −4b + 12, the same numerator.
- The rate is .Dividing by b − 3 means multiplying by its reciprocal; the factor cancels only because b ≠ 3.
- Set , then multiply both sides by b: .This finds the input that gives rate −1; multiplying by b is allowed because b ≠ 0.
- Multiply both sides by −1: .The same multiplication preserves the equality and makes b positive.
- 4 > 3, , and .The candidate satisfies the requested interval and both original restrictions.
5 How
- Evaluate the fixed numerical endpoint.
- Substitute the endpoint letter to write the other output.
- Subtract the outputs and write the matching input difference.
- For a polynomial, factor the numerator and verify by multiplying back.
- Cancel only a matching factor multiplying the whole numerator, preserving the original restrictions.
- If the rate is given, set the simplified rate expression equal to that number, solve, and check the endpoint in the original quotient.
A letter endpoint, forward or backward
- Build the endpoint quotient before simplifying.
- Record all excluded inputs from function bottoms and the input difference.
- Use common factors, a difference of squares, or the sum-and-product factor puzzle when applicable.
- If requested, solve the rate equation and check the candidate in the original quotient.
6 Worked example
Worked example
Average rate of change from 5 to a letter endpoint, then solving for the endpoint
Let f(x) = − 2x − 2. (a) Write the average rate of change of f between the inputs 5 and a, where a ≠ 5, as a simplified expression in a. (b) The average rate of change of f between 5 and a equals 7. Find a and state the interval.
Show the steps and the answer
- .The fixed numerical endpoint gives a number, so evaluate it first.
- .Replace every x with the endpoint letter a to get the other output.
- rate , with .The average rate is the change in output over the matching change in input, in the same order. a = 5 would make the denominator zero.
- − 2a − 15 = (a − 5)(a + 3). Check: .Factor the polynomial numerator so that any factor matching the denominator becomes visible. Multiplying back confirms the factoring.
- rate , for .(a − 5) multiplies the whole numerator and equals the denominator, so it cancels. The restriction a ≠ 5 from the original quotient still holds.
- Set , so .The given rate equals the simplified expression, so solve that equation for the endpoint.
- Check in the original quotient: , and . Since 4 < 5, the sorted interval is [4, 5].The endpoint must satisfy a ≠ 5 and give the stated rate in the unsimplified quotient. An interval is written with its smaller endpoint first.
Work to write
- f(5) = 13
- rate = a + 3, a ≠ 5
- a + 3 = 7 ⇒ a = 4
- Check: = 7; interval [4, 5]
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
A linear formula needs no factoring puzzle
This asks for the average rate from a fixed input to any different input b. Find it for f(x) = 4x + 9, starting at −2.
Show the steps and the answer
- ; .The first output is numerical; the second keeps the endpoint letter.
- Output change: .Subtract the entire starting output.
- Input change: .The input change follows the same endpoint order.
- , so , with .The factor b + 2 multiplies the whole top. The original bottom excludes b = −2.
Rung 2 of 7
Average rate of change on [5, a] when f(5) = 0
Let f(x) = − 3x − 10. (a) Write the average rate of change of f from x = 5 to x = a, where a ≠ 5, as a simplified expression in a. (b) The average rate of change on [5, a] is 9. Find a.
Show the steps and the answer
- .The fixed numerical endpoint is evaluated first. Its output is 0, so subtracting it will not change the numerator.
- .Replacing x with the endpoint letter a gives the other output.
- Rate , with .Average rate of change is the change in output divided by the matching change in input, taken in the same order. The denominator cannot be 0.
- Factor the numerator: . Check by multiplying back: .We need two numbers with product −10 and sum −3. Those are −5 and 2. Multiplying back confirms the factoring.
- Rate , for .(a − 5) multiplies the whole numerator and matches the denominator, so it cancels. The restriction a ≠ 5 from the original quotient still applies.
- Set , so . Since 7 > 5, the interval is [5, 7].The given rate equals the simplified expression. The solution a = 7 is not 5, so it is allowed, and it gives the sorted interval [5, a].
- Check in the original quotient: , so .The endpoint must be checked in the original, unsimplified quotient to confirm the rate is 9.
Work to write
- f(5) = 0
- Rate = , a ≠ 5
- Rate = a + 2, a ≠ 5
- a + 2 = 9, so a = 7
- Check: = 9
Rung 3 of 7
A difference of squares
This asks for the rate expression in b, using a fixed starting input 6. Find the average rate of f(x) = + 5 from 6 to b.
Show the steps and the answer
rate = b + 6
- ; .Evaluate the fixed endpoint and substitute the letter at the other endpoint.
- .Subtract the whole starting output; the constants combine: 5 − 41 = −36.
- .Multiplying these two factors gives + 6b − 6b − 36; the middle terms cancel.
- , with .The input change is b − 6, and that nonzero factor multiplies the whole numerator.
Rung 4 of 7
A coefficient and a difference of squares
This asks for a rate expression rather than one rate number. Find the average rate of f(x) = 3 − 5 on [2, b], with b > 2.
Show the steps and the answer
rate = 3b + 6
- ; .Evaluate the fixed input 2 and then substitute the endpoint b.
- .Subtract the whole starting output; −5 − 7 = −12.
- .Both terms contain a factor of 3.
- .Multiplying back gives + 2b − 2b − 4 = − 4.
- , with .The input difference b − 2 is a nonzero factor of the entire top.
- 3b + 6, for b ≠ 2. The stated interval [2, b] uses b > 2
- for b < 2 use [b, 2].
Rung 5 of 7
Average rate on [5, a] for a shifted parabola, then find a
Let f(x) = (x − 1 − 3, which expands to f(x) = − 2x − 2. (a) Write the average rate of change of f between x = 5 and x = a as a simplified expression in a, with a ≠ 5. (b) The average rate of change on [5, a] is 10. Find a.
Show the steps and the answer
- .The fixed numerical endpoint is evaluated first, so one output is a plain number.
- .Substituting the letter a for x gives the other output as an expression.
- Rate , with .The average rate is the change in output over the matching change in input, taken in the same order. a ≠ 5 keeps the denominator nonzero.
- Factor − 2a − 15. Look for two numbers with product −15 and sum −2. These are −5 and 3, so − 2a − 15 = (a − 5)(a + 3). Check: .This is the sum-and-product puzzle for a monic quadratic. Multiplying back confirms the factorization is correct.
- , for .(a − 5) multiplies the whole numerator and matches the denominator, so it cancels. The restriction a ≠ 5 from the original quotient still applies.
- Set , so . Since 7 > 5, the interval is [5, 7].The given rate equals the simplified expression. The value a = 7 is allowed because it is not 5.
Work to write
- f(5) = 13
- rate = a + 3, a ≠ 5
- a + 3 = 10 ⇒ a = 7
- check: = 10
Rung 6 of 7
Finding an unknown endpoint from a given average rate of change
Let f(x) = − 6x + 4, which can also be written f(x) = (x − 3 − 5. (a) Write the average rate of change of f between the inputs 5 and a, where a ≠ 5, as a simplified expression in a. (b) The average rate of change of f between 5 and a equals 3. Find a and state the interval, written with the smaller endpoint first.
Show the steps and the answer
- The fixed endpoint is a number, so its output can be computed directly.
- Substituting the letter a for x gives the output at the other endpoint.
- rate Average rate of change is the change in output divided by the matching change in input, with the inputs in the same order as the outputs.
- − 6a + 5 = (a − 1)(a − 5). Check: Factoring shows whether the numerator contains the factor (a − 5). Multiplying back confirms the factoring.
- rate , for (a − 5) multiplies the whole numerator, so it cancels. The restriction a ≠ 5 stays because the original quotient is undefined at a = 5.
- , so Setting the simplified rate equal to the given value gives a linear equation in a.
- satisfies . Since 4 < 5, the sorted interval is [4, 5].The solution must satisfy the original restriction. An interval is written with the smaller endpoint first.
Work to write
- rate = a − 1, a ≠ 5
- a − 1 = 3 so a = 4
- interval [4, 5]
- check: = 3
Rung 7 of 7
Work backward with a fraction
This asks for an endpoint giving a specified average rate. Let g(x) = . Starting at 3, find b > 3 so the average rate on [3, b] is −1.
Show the steps and the answer
- Require for g(b), and for the input change. ; .Both the function output and the rate quotient need nonzero bottoms.
- .Write the whole number 4 over bottom b by multiplying it by = 1.
- .Multiplying −4 through the parentheses gives −4b + 12, the same numerator.
- The rate is .Dividing by b − 3 means multiplying by its reciprocal; the factor cancels only because b ≠ 3.
- Set , then multiply both sides by b: .This finds the input that gives rate −1; multiplying by b is allowed because b ≠ 0.
- Multiply both sides by −1: .The same multiplication preserves the equality and makes b positive.
- 4 > 3, , and .The candidate satisfies the requested interval and both original restrictions.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- If the problem gives a rate and asks for an endpoint, build the rate expression first and solve second.
- Multiply proposed factors back out; this checks the numerator before cancellation.
- Keep the original excluded input beside every final expression.
- Write interval endpoints in increasing order. Reversing both subtractions preserves the rate, but reversing only one changes its sign.
7 The trap
Canceling pieces of sums instead of whole multiplied factors, or forgetting the excluded endpoint after cancellation.
Lesson 5 of 10
The difference quotient: average rate of change from x to x + h
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
The difference quotient has two ordinary actions hidden in its name. A difference is the result of subtracting: how much the output changed. A quotient is the result of dividing: share that change over the input change. Picture starting at a road marker and walking a chosen distance. Call your starting input x and your signed step h. A positive h goes right on the number line; a negative h goes left. Your ending input is x + h. The difference quotient measures average climb per input unit over that trip. It is the same average rate you already know, written so one answer can cover many starts and steps.
2 Picture it
Reminder
Reminder: Distributive property, Subtracting a whole expression, Like terms, Canceling a nonzero factor
- Distributive property. A number outside parentheses multiplies each term: −2(x + h) = −2x − 2h.
- Subtracting a whole expression. The minus means multiply by −1: −(6 − 2x) = −6 + 2x.
- Like terms. Like terms have the same letters with the same powers: −2x + 2x = 0. Terms and x cannot be combined.
- Canceling a nonzero factor. = −2 · = −2 only for h ≠ 0.
3 Why
Put starting input x and ending input x + h into the endpoint formula. The bottom is (x + h) − x = h, and the top is f(x + h) − f(x). That is why the formula has this form. For an expanded polynomial, f(x + h) contains a copy of f(x); subtracting removes that copy, leaving terms with h. For g(x) = 6 − 2x, that is 6 − 2x − 2h minus 6 − 2x. Other kinds of functions may require combining fractions first, rather than showing cancellation term by term.
4 The rule
Difference quotient , with and both outputs defined.
It is the average rate on if h > 0, and on the sorted interval if h < 0.
The same idea, five ways
Say 'difference in outputs divided by the input step'. Read f(x + h) as 'f of x plus h'.
Start at input x, change the input by a nonzero signed amount h, and compare the two outputs per input unit.
- [x, x + h] if h > 0; [x + h, x] if h < 0
Average climb per mile between a chosen road marker and another marker a signed step away.
The same idea, other ways
For starting at 3, a step 1 gives = 7. A step 0.5 gives = 6.5. Steps 0.1 and 0.01 give 6.1 and 6.01. The table shows every rate is 6 + h. The fully worked first rung computes every column.
For g(x) = 6 − 2x, start at 1 and step 1: = −2. Start at 3 and step 2: = −2. Start at −2 and step 0.5: = −2. All give −2; the worked subtraction shows why.
If d(t) is miles driven after t hours, gives the average speed across those times when h > 0. For positive s and h on a growing square tile, 2sh + is the extra area and 2s + h is extra area per inch of growth. At s = 10 and h = 1, that rate is 21. A reusable answer also covers many intervals: 2x + h at x = 3, h = 0.5 gives 6.5.
In f(x + h), f names the machine and x + h is its one input. It is not f multiplied by x + h. For a square machine, put in 3 + 1 = 4 and get 16, rather than adding 1 to the old output 9.
The square table's rates 7, 6.5, 6.1, and 6.01 move toward 6 as the positive step shrinks. For smoothly changing travel, shrinking the time window makes an average speed approach the speedometer reading at the starting time. Here the immediate task is building reusable interval rates; no zero step is ever divided by.
Part 1: When the start is a number
The letter x only names the starting input. Replacing it by 4 gives an interval between 4 and 4 + h; the method is unchanged.
- For h > 0, the interval is [4, 4 + h]. For h < 0, it is [4 + h, 4].
- The input difference in starting-to-ending order is always h.
Worked example
Difference quotient starting at x = 3
Let f(x) = − 4x + 1. (a) Find and simplify the difference quotient , with h ≠ 0. (b) Use your result with h = −1 to find the average rate of change of f on the matching interval, and name that interval.
Show the steps and the answer
- Find the fixed output first: .The start is the number 3, so f(3) is a single number. Computing it once keeps the subtraction simple.
- Plug in: .Every x is replaced by the whole input (3 + h). The square (3 + h is multiplied out to 9 + 6h + , and −4 is distributed over both terms of (3 + h).
- Subtract: .Writing −(f(3)) in parentheses lets the minus sign reach the whole value. Subtracting −2 means adding 2.
- Simplify: .The terms that do not depend on h, −2 and +2, cancel. This always happens for a fully expanded polynomial.
- Cancel h: , for .Factor h shows that h multiplies the entire numerator. Since h ≠ 0, we may divide it out. The restriction h ≠ 0 stays.
- Part (b): put into to get . The interval runs from to 3. Since h < 0, write it in sorted order as [2, 3].When h is negative, x + h lies to the left of x. The average rate therefore belongs to the interval [x + h, x].
Work to write
- h = −1: h + 2 = 1; interval [2, 3] since h < 0
Part 2: When the start is 3 for a square
Use the same replacement in a square formula. Multiplying out creates the output change 6h + . Factoring h turns this into the reusable rate 6 + h.
- The rate is 6 + h, with h ≠ 0.
- This is 2x + h with the starting input set to x = 3.
- Section 1.1 used a and a + h; here the general start is named x.
Worked example
Difference quotient of a quadratic starting at x = 2
Let f(x) = 2 + 4x − 2. (a) Find and simplify the difference quotient , with h ≠ 0. (b) Use your result with h = to find the average rate of change of f on the matching interval, and name that interval.
Show the steps and the answer
- Find f(2) first: .The fixed output f(2) is needed for the subtraction, and the start is a plain number.
- Plug in : . Expand , so .Every x is replaced by the whole input (2 + h). The square must be multiplied out before it is doubled.
- Subtract: .The parentheses let the minus reach the whole of f(2). The constant terms, which do not depend on h, cancel.
- Factor and cancel h: , for .h multiplies the entire numerator, so the nonzero factor h divides out. The restriction h ≠ 0 stays.
- Part (b): with , the rate is . Because h > 0, the interval is .The difference quotient is the average rate on [x, x + h] when h > 0.
Work to write
- f(2) = 14
- h = : average rate = 13 on [2, ]
Part 3: A negative h goes left
h is a signed input change, not necessarily a positive length. The ending input is still start plus h. Keep the output subtraction in that same travel order; sorting the interval reverses both differences and preserves the ratio.
- h < 0 means the ending input is smaller than the starting input.
- For x = 4 and h = −3, the endpoints are 4 and 1, so the sorted interval is [1, 4].
Worked example
Difference quotient of a downward parabola, then a step backward with h = −3
Let f(x) = − + 6x − 5. (a) Find and simplify the difference quotient , with h ≠ 0. (b) Use your result with x = 5 and h = −3 to find the average rate of change of f on the matching interval, and name that interval.
Show the steps and the answer
- (xh ) xh Plug in: every x is replaced by the whole input (x + h). The square is expanded before the leading minus is applied to all three of its terms.
- (xh ) xh Subtract: f(x) goes in parentheses so the minus reaches every term. − becomes +, +6x becomes −6x, and −5 becomes +5.
- Numerator xh Simplify: − + = 0, 6x − 6x = 0 and −5 + 5 = 0. The terms independent of h cancel, as they must for a fully expanded polynomial.
- , with Cancel h: h is a factor of the entire numerator and h ≠ 0, so it divides out. The restriction h ≠ 0 stays.
- With x = 5 and h = −3: Substitute the given values into the simplified quotient. Subtracting a negative h adds 3.
- , so the interval is [2, 5]Since h < 0, the step goes left from x = 5 to x + h = 2. The interval is written sorted, from the smaller endpoint to the larger.
Work to write
- f(x + h) = − − 2xh − + 6x + 6h − 5
- f(x + h) − f(x) = −2xh − + 6h
- Interval [2, 5]; average rate of change = −1
Part 4: An area-growth use
A difference quotient compares the growth of a square's area with the growth of its side. The picture splits the added area into two strips and a corner when the lengths and growth are positive.
- A square of side s has area .
- Growing the side by h adds 2sh + square units.
- For s > 0 and h > 0, area gain per side-length gain is 2s + h.
Worked example
What the difference quotient measures on a tile
This asks how much area is gained per inch of side growth. A square tile's side grows from 10 inches to 11 inches. Find the average area gain per inch.
Show the steps and the answer
- Starting area: square inches. Ending area: square inches.A square's area is its side times itself.
- Area change: square inches. Side change: inch.Subtract matching endpoints in the same order.
- square inches per inch.The difference quotient divides the area difference by the side-length difference.
5 How
- Plug in: replace every x in the formula by the whole input (x + h); multiply out the needed products.
- Subtract: write −(f(x)) with parentheses, then let that minus reach every term.
- Simplify: combine like terms; for a fully expanded polynomial, the terms independent of h cancel.
- Cancel h: when h multiplies the entire numerator, divide that nonzero factor out; keep every original restriction.
The difference quotient in four moves
- Plug in the whole input x + h.
- Subtract the whole starting output f(x).
- Simplify using the right arithmetic for the formula.
- Cancel only a whole nonzero common factor, and state the restrictions.
6 Worked example
Worked example
Difference quotient of a line
This asks for the average rate over any nonzero input step h starting at any input x. Find for g(x) = 6 − 2x. The plan is plug in, subtract, simplify, then cancel h.
Show the steps and the answer
- Require . Write .x + h is one whole input. The −2 must multiply all of it; writing 6 − 2x + h would multiply only x.
- .The distributive property means the multiplier reaches each term: (−2) · x = −2x and (−2) · h = −2h.
- Write the output change as .Subtract the entire starting output, not one selected term.
- , so the output change is .The hidden sign on 6 is +. Multiplying the whole starting expression by −1 changes +6 to −6 and −2x to +2x.
- .The +6 and −6 cancel, and −2x and +2x cancel. The expanded polynomial contains a copy of g(x), removed by subtraction.
- .The nonzero factor h divides by itself to give 1.
- −2, with h ≠ 0.
- For each 1 unit right, g drops 2 output units. This rate holds for both positive and negative signed steps.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 6
Difference quotient with numbers: f(x) = − 3x + 5 at x = 1, h = 3
Let f(x) = − 3x + 5. Use x = 1 and h = 3, so x + h = 4. The table lists f(1) = 3 and f(4) = 9. Find the difference quotient and state the interval it is the average rate of change on.
Show the steps and the answer
- Plug in: . Multiply out: , and . So .Every x in the formula is replaced by the whole input (x + h) = (1 + 3). Expanding before adding shows which pieces come from h. The total matches the table value f(4) = 9.
- Subtract: .Writing −(f(x)) with parentheses lets the minus sign reach every term of f(1) = 1 − 3 + 5.
- Simplify: the pairs and cancel, leaving . So the numerator is 6. As a check, .The terms that do not involve h (the pieces of f(1)) cancel. Only terms built from h = 3 remain.
- Cancel h: . Here , and both f(1) and f(4) are defined.Dividing by h needs h ≠ 0. Since h > 0, the interval is [x, x + h] = [1, 4].
Work to write
- x + h = 1 + 3 = 4
- f(4) = 16 − 12 + 5 = 9 and f(1) = 1 − 3 + 5 = 3
- = 2, with h = 3 ≠ 0
- Average rate of change on [1, 4] is 2
Rung 2 of 6
Difference quotient of the constant function f(x) = 4
Let f(x) = 4 for every real number x. Its graph is the horizontal line y = 4, which passes through (−2, 4) and (3, 4). (a) Find and simplify the difference quotient , with h ≠ 0. (b) Use your result with x = 3 and h = −5, so x + h = −2. Find the average rate of change of f on the matching interval, and name that interval.
Show the steps and the answer
- Plug in: .The rule for f has no x in it. Replacing every x by (x + h) changes nothing, so the output is 4 for any input.
- Subtract with parentheses: .Writing −(f(x)) with parentheses makes the minus sign reach the whole output f(x) = 4.
- Simplify the numerator: , so the difference quotient is .The two outputs are equal, so they cancel completely. Every term is independent of h, so nothing is left.
- Divide: for .Zero divided by any nonzero number is 0. The restriction h ≠ 0 stays, because the quotient is undefined at h = 0.
- Part (b): with and , the difference quotient is 0. Since h < 0, sort the endpoints and to get the interval .The rule says that when h < 0, the quotient is the average rate on the sorted interval [x + h, x].
Work to write
- f(x + h) = 4
- h = −5 < 0, so the interval is [−2, 3]
- Average rate of change on [−2, 3] = 0
Rung 3 of 6
Multiplication changes the whole input
This asks for a rate formula for every start and every nonzero step. Find the difference quotient of f(x) = 4x.
Show the steps and the answer
- .The whole new input replaces x, and 4 multiplies each piece.
- Output change: .Subtract the entire original output; +4x and −4x cancel.
- , with .A common nonzero multiplier h divides out.
Rung 4 of 6
A negative slope with a constant term
This asks for the average rate over any nonzero input step h starting at any input x. Find for g(x) = 6 − 2x. The plan is plug in, subtract, simplify, then cancel h.
Show the steps and the answer
- Require . Write .x + h is one whole input. The −2 must multiply all of it; writing 6 − 2x + h would multiply only x.
- .The distributive property means the multiplier reaches each term: (−2) · x = −2x and (−2) · h = −2h.
- Write the output change as .Subtract the entire starting output, not one selected term.
- , so the output change is .The hidden sign on 6 is +. Multiplying the whole starting expression by −1 changes +6 to −6 and −2x to +2x.
- .The +6 and −6 cancel, and −2x and +2x cancel. The expanded polynomial contains a copy of g(x), removed by subtraction.
- .The nonzero factor h divides by itself to give 1.
- −2, with h ≠ 0.
- For each 1 unit right, g drops 2 output units. This rate holds for both positive and negative signed steps.
Rung 5 of 6
Difference quotient of a downward parabola starting at x = 1
Let f(x) = − − 2x + 5. Its graph is the downward-opening parabola y = −(x + 1 + 6, with vertex (−1, 6). It passes through (1, 2) and (3, −10). (a) Find and simplify the difference quotient , with h ≠ 0. (b) Use your result with h = 2 to find the average rate of change of f on the matching interval, and name that interval.
Show the steps and the answer
- Find the starting output: .The difference quotient needs f(1), so the fixed start x = 1 is evaluated first. The result matches the point (1, 2) on the graph.
- Plug in 1 + h: .Every x is replaced by the whole input (1 + h). The square is expanded before the leading minus sign is distributed.
- Subtract: .Writing −(f(1)) with parentheses makes the minus sign reach the whole starting output.
- Simplify the numerator: .The terms that do not depend on h cancel, as they must for a fully expanded polynomial.
- Factor and cancel h: , for .h multiplies the entire numerator. It is a nonzero factor, so it can be divided out. The restriction h ≠ 0 stays attached to the result.
- For (b), substitute : . The inputs are 1 and , so the interval is [1, 3].With h > 0, the difference quotient is the average rate of change on [x, x + h] = [1, 3].
Work to write
- f(1) = 2
- Interval: [1, 3]; average rate of change = −6
Rung 6 of 6
Difference quotient with a negative step on y = + 2x − 3
Let f(x) = + 2x − 3. Its graph is the upward-opening parabola y = (x + 1 − 4, with vertex (−1, −4). It passes through (−1, −4) and (2, 5). (a) Find and simplify the difference quotient , with h ≠ 0. (b) Use your result with x = 2 and h = −3 to find the average rate of change of f on the matching interval, and name that interval.
Show the steps and the answer
- xh Plug in: every x becomes the whole input (x + h). Then (x + h = + 2xh + , and 2(x + h) = 2x + 2h.
- xh xh Subtract: f(x) goes in parentheses, so the minus reaches every one of its terms. This turns −3 into +3.
- xh Simplify: − = 0, 2x − 2x = 0 and −3 + 3 = 0. The terms independent of h cancel, as they must for a fully expanded polynomial.
- , with Cancel h: h is a factor of the entire numerator and h ≠ 0, so it divides out. The restriction h ≠ 0 still holds.
- With x = 2 and h = −3: Substitute into the simplified quotient. Here −3 ≠ 0, so this value of h is allowed.
- , so the interval is The step h is negative, so x + h lies to the left of x. Sorting the endpoints gives [x + h, x] = [−1, 2].
Work to write
- f(x + h) = + 2xh + + 2x + 2h − 3
- f(x + h) − f(x) = + 2xh + + 2x + 2h − 3 − ( + 2x − 3) = 2xh + + 2h
- = 2x + h + 2, h ≠ 0
- x + h = −1, so the interval is [−1, 2]
- Average rate of change on [−1, 2] = 3
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Remember the name: difference means subtraction, quotient means division.
- Here x names the starting input, not an unknown you automatically solve for. h names the signed input change.
- The four moves are plug in, subtract, simplify, cancel a valid whole factor.
- For a fully expanded polynomial numerator, every term independent of h cancels. Do not apply that wording blindly to square roots or other unexpanded functions.
- Check algebra with x = 2 and h = 3; values 0 and 1 often hide missing factors and wrong powers.
- The assigned algebra skill is an interval ending at a letter or having step h. This is the same endpoint-rate idea from section 1.1.
7 The trap
Adding h to the old output, treating f as a multiplier, or allowing a zero input step. Substitute x + h into the whole function formula and keep h ≠ 0.
Lesson 6 of 10
Difference quotient of a quadratic
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
A quadratic polynomial uses constants, multiples of the input, and a nonzero multiple of the squared input. Think of enlarging a square carpet: the old square stays in one corner, two strips appear beside it, and a corner fills the gap. Multiplying out (x + h records all four pieces: , xh, xh, and . That is why + loses something. Subtracting the old output removes the old square, leaving the pieces due to the input change. If every remaining term contains h, write each as h times something and divide out that common multiplier. A number in front multiplies every piece. The final rate can depend on where you start and how far you step.
2 Picture it
Reminder
Reminder: Dividing powers, Distributing a multiplier, Subtracting a whole expression
- Dividing powers. ÷ h = (h · h) ÷ h = h for h ≠ 0. One of the two h factors is removed.
- Distributing a multiplier. 3( + 2xh + ) = 3 + 6xh + 3. The 3 reaches every term.
- Subtracting a whole expression. −(3 − 4x + 1) = −3 + 4x − 1. The outside −1 changes all three signs.
3 Why
Multiplying (x + h)(x + h) gives + xh + hx + = + 2xh + . Subtracting leaves h(2x + h), so dividing by h gives 2x + h. For a fully expanded polynomial, the terms independent of h reproduce the original f(x) and cancel when it is subtracted. This is a polynomial check, not a universal description of all functions. The rate varies on a curve: for 3 − 4x + 1, steps of 1 beginning at 1 and at 2 give different rates, 5 and 11.
4 The rule
xh .
For , the difference quotient is , with . Multiply any outside coefficient into every expanded term, subtract all of f(x), then factor the whole numerator before canceling h.
The same idea, five ways
Say 'multiply out the square, subtract the old output, factor the step, then divide'.
The extra square pieces produce the output change, and dividing by the input step gives the average rate.
- (x + h = + 2xh +
- For f(x) = : = 2x + h, h ≠ 0
- [x, x + h] if h > 0; [x + h, x] if h < 0
A square carpet grows by two strips and a corner, then its added area is compared with the side-length change.
The same idea, other ways
The old square, two xh strips, and corner account for the entire new square. The picture describes positive lengths; the algebraic identity still holds when x or h is negative.
For 3 − 4x + 1, subtracting the original output creates +3 with −3, −4x with +4x, and +1 with −1. Each pair adds to 0, leaving 6xh + 3 − 4h.
+3 and −3 cancel
−4x and +4x cancel
+1 and −1 cancel
For the harder function, from 1 to 2 the rate is = 5. From 2 to 3 it is = 11. The same step h = 1 gives a different rate because the curve is steeper in a different place.
Part 1: A coefficient outside the square
Multiplying a square by a number means multiplying its entire area by that number. It does not mean moving that number inside the square and squaring it too.
- 5(x + h = 5 + 10xh + 5.
- The outside coefficient acts after the square is computed.
Worked example
A coefficient multiplies every square piece
This asks for the same square rate when every output is multiplied by 5. Find the difference quotient of f(x) = 5.
Show the steps and the answer
= 5 + 10xh + 5
rate = 10x + 5h
- (xh ).Multiply out the square before applying its outside coefficient 5.
- xh .The 5 multiplies all three terms, including the middle term.
- Output change: (xh ) xh .Subtract the whole original output; 5 cancels with −5.
- 10xh .Write 10xh = h · 10x and 5 = h · 5h.
- , with .Cancel the nonzero multiplier of the whole numerator.
Part 2: A square plus a linear term
Each appearance of x needs the new input. The square gives 2xh + after subtraction; the extra linear term gives another 2h.
- For f(x) = + 2x, rate = 2x + h + 2, with h ≠ 0.
Worked example
Difference quotient of f(x) = 3 − 6x and a secant slope
Let f(x) = 3 − 6x. The graph of y = 3 − 6x passes through (0, 0) and (2, 0), and its lowest point is (1, −3). (a) Find and simplify the difference quotient for h ≠ 0. (b) Use your result with x = 1 and h = 1 to find the slope of the secant line through (1, −3) and (2, 0).
Show the steps and the answer
- (xh ) xh Every x is replaced by (x + h). The square expands as + 2xh + , and the outside multipliers 3 and −6 must reach every term inside their parentheses.
- (xh ) xh All of f(x) is kept in parentheses after the minus, so both of its terms change sign.
- Combine terms: and , leaving 6xh The terms that do not contain h cancel, as they always do in a difference quotient.
- , for Every remaining term contains h, so h factors out of the whole numerator. It cancels with the denominator only when h ≠ 0.
- For part (b), substitute x = 1 and h = 1: With x = 1 and h = 1 the difference quotient is the slope between the inputs 1 and 2, and these are the points (1, −3) and (2, 0).
Work to write
- f(x + h) = 3 + 6xh + 3 − 6x − 6h
- f(x + h) − f(x) = 6xh + 3 − 6h
- Secant slope = 3
Part 3: A three-term quadratic
A three-term function needs every substitution and every subtraction sign. The constant term disappears in the difference, while the linear term leaves a multiple of h.
- For f(x) = 3 − 4x + 1, rate = 6x + 3h − 4, with h ≠ 0.
- 6xh = h · 6x; 3 = h · 3h; −4h = h · (−4).
Worked example
Difference quotient with a number in front of
This asks for the average-rate formula for a quadratic with three terms. Find for f(x) = 3 − 4x + 1.
Show the steps and the answer
- .The new input replaces every x position, including the linear term.
- (xh ) .Multiply out the square first, then let −4 multiply both terms of x + h.
- xh .The coefficient 3 multiplies , 2xh, and separately.
- Output change: (xh ) .The whole original output stays in parentheses until its minus sign is distributed.
- xh .The outside −1 changes +3 to −3, −4x to +4x, and +1 to −1.
- xh .The explicit matching pairs are +3 with −3, −4x with +4x, and +1 with −1.
- 6xh , and . Therefore the output change is .Each remaining term contains the same multiplier h.
- , with .A nonzero h multiplying the whole top cancels with h on the bottom.
Part 4: A negative squared term
The minus outside negates the entire square after it has been multiplied out. Subtracting the starting negative square then adds a matching positive .
- −(x + h = − − 2xh − .
- For − + 6x, rate = −2x − h + 6, with h ≠ 0.
Worked example
A negative square coefficient
This asks for the rate formula when a minus sign is outside the square. Find the difference quotient of f(x) = − + 6x.
Show the steps and the answer
= − − 2xh −
rate = −2x − h + 6
- .The new input stays inside the square; the outside minus remains outside.
- (xh ) xh .The outside minus reaches all three square terms, while 6 multiplies both input pieces.
- Output change: (xh ) .Subtract the whole original output in parentheses.
- xh .Multiplying the starting expression by −1 changes − to + and +6x to −6x.
- xh .The − and + cancel; 6x and −6x cancel. The remaining factors after taking out h are −2x, −h, and 6.
- , with .The entire numerator has a nonzero factor h that divides out.
5 How
- Plug in: replace every x by (x + h), multiply out the square, and apply each outside multiplier.
- Subtract: keep all of f(x) in parentheses after a minus, then flip every term's sign.
- Simplify: combine matching polynomial terms; the terms independent of h cancel.
- Cancel h: write every remaining term as h times something, factor h from the whole numerator, and cancel only for h ≠ 0.
The quadratic difference quotient in four moves
- Plug in and multiply the square into four products.
- Subtract the complete original formula with parentheses.
- Simplify by grouping like terms.
- Factor a whole nonzero h and keep the original restriction.
6 Worked example
Worked example
Difference quotient for a garden plot with a compost corner
A rectangular garden plot is x meters wide and 2x meters long. A 2 square-meter corner is set aside for a compost bin, so the planted area is A(x) = 2 − 2 square meters. The graph of y = 2 − 2 passes through (2, 6) and (3, 16), and its lowest point is (0, −2). (a) Find and simplify the difference quotient for h ≠ 0. (b) Use your result with x = 2 and h = 1 to find the average rate of change of the planted area as the width grows from 2 m to 3 m.
Show the steps and the answer
- (xh ) xh Replace every x by (x + h), expand with (x + h = + 2xh + , and multiply the outside coefficient 2 into every expanded term.
- (xh ) xh Keep all of A(x) in parentheses after the minus, then flip the sign of each of its terms. The −2 becomes +2.
- and , so the numerator is 4xh .Combine matching terms. The terms that do not contain h cancel.
- , for Every remaining term contains h. Factor h from the whole numerator, then cancel it, which is allowed only because h ≠ 0.
- With x = 2 and h = 1: Substitute into the simplified difference quotient. The result is the average rate of change of A on [2, 3].
Work to write
- A(x + h) = 2 + 4xh + 2 − 2
- A(x + h) − A(x) = (2 + 4xh + 2 − 2) − (2 − 2) = 4xh + 2
- x = 2, h = 1: 4(2) + 2(1) = 10 per m
- Check: = 10
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Difference quotient for the area of a strip of five square tiles
A decorative border is a straight strip of 5 identical square tiles placed side by side. If each tile has side length x inches, the total area of the strip is A(x) = 5 square inches. (a) Find and simplify the difference quotient for h ≠ 0. (b) Use your result to find the average rate of change of the area when the side length grows from x = 4 inches to x = 4.2 inches, so h = 0.2.
Show the steps and the answer
- Plug in: (xh ) xh .Every x is replaced by (x + h). The square expands as (x + h = + 2xh + , and the outside coefficient 5 must multiply every expanded term.
- Subtract: (xh ) xh .All of A(x) goes in parentheses after the minus sign, and the sign of each term inside is then flipped.
- Simplify: , so the numerator is 10xh .Matching terms are combined. The terms with no h cancel, and every remaining term contains h.
- Cancel h: , for .Write each term as h times something and factor h from the whole numerator. The common factor h may be canceled only because h ≠ 0.
- Evaluate at x = 4 and h = 0.2: .The simplified difference quotient is the average rate of change from x to x + h, so the numbers are substituted directly.
Work to write
- A(x + h) = 5(x + h = 5 + 10xh + 5
- A(x + h) − A(x) = 5 + 10xh + 5 − 5 = 10xh + 5
- = = 10x + 5h, h ≠ 0
- At x = 4, h = 0.2: 10(4) + 5(0.2) = 41
Rung 2 of 7
A coefficient multiplies every square piece
This asks for the same square rate when every output is multiplied by 5. Find the difference quotient of f(x) = 5.
Show the steps and the answer
= 5 + 10xh + 5
rate = 10x + 5h
- (xh ).Multiply out the square before applying its outside coefficient 5.
- xh .The 5 multiplies all three terms, including the middle term.
- Output change: (xh ) xh .Subtract the whole original output; 5 cancels with −5.
- 10xh .Write 10xh = h · 10x and 5 = h · 5h.
- , with .Cancel the nonzero multiplier of the whole numerator.
Rung 3 of 7
Difference quotient of f(x) = 2 − 4x
Let f(x) = 2 − 4x. The graph of y = 2 − 4x passes through (0, 0) and (3, 6), and its lowest point is (1, −2). (a) Find and simplify the difference quotient for h ≠ 0. (b) Use your result with x = 0 and h = 3 to find the slope of the secant line through (0, 0) and (3, 6).
Show the steps and the answer
- Replace every x by (x + h): .f(x + h) means the input x + h goes into each place x appears, in both the square term and the linear term.
- Expand the square: xh , so xh .The outside coefficient 2 multiplies every term of the expanded square, not just the first one.
- Distribute the : . So xh .The multiplier −4 applies to both x and h.
- Subtract all of f(x) in parentheses: (xh ) xh .The minus sign applies to every term of f(x), so −4x becomes +4x.
- Combine like terms: and , leaving 4xh .The terms that do not contain h cancel. Every remaining term should contain h.
- Factor h from the whole numerator: 4xh .Each term has a factor of h. Only a factor of the entire numerator can be canceled.
- Divide: , for .h divided by h equals 1 only when h is not zero.
- For part (b), substitute x = 0 and h = 3: .The difference quotient with x = 0 and h = 3 is the slope from the point at x = 0 to the point at x = 0 + 3 = 3.
Work to write
- f(x + h) = 2(x + h − 4(x + h) = 2 + 4xh + 2 − 4x − 4h
- f(x + h) − f(x) = 2 + 4xh + 2 − 4x − 4h − (2 − 4x) = 4xh + 2 − 4h
Rung 4 of 7
A coefficient, a linear term, and a constant
This asks for the average-rate formula for a quadratic with three terms. Find for f(x) = 3 − 4x + 1.
Show the steps and the answer
- .The new input replaces every x position, including the linear term.
- (xh ) .Multiply out the square first, then let −4 multiply both terms of x + h.
- xh .The coefficient 3 multiplies , 2xh, and separately.
- Output change: (xh ) .The whole original output stays in parentheses until its minus sign is distributed.
- xh .The outside −1 changes +3 to −3, −4x to +4x, and +1 to −1.
- xh .The explicit matching pairs are +3 with −3, −4x with +4x, and +1 with −1.
- 6xh , and . Therefore the output change is .Each remaining term contains the same multiplier h.
- , with .A nonzero h multiplying the whole top cancels with h on the bottom.
Rung 5 of 7
A negative square coefficient
This asks for the rate formula when a minus sign is outside the square. Find the difference quotient of f(x) = − + 6x.
Show the steps and the answer
= − − 2xh −
rate = −2x − h + 6
- .The new input stays inside the square; the outside minus remains outside.
- (xh ) xh .The outside minus reaches all three square terms, while 6 multiplies both input pieces.
- Output change: (xh ) .Subtract the whole original output in parentheses.
- xh .Multiplying the starting expression by −1 changes − to + and +6x to −6x.
- xh .The − and + cancel; 6x and −6x cancel. The remaining factors after taking out h are −2x, −h, and 6.
- , with .The entire numerator has a nonzero factor h that divides out.
Rung 6 of 7
A fresh three-term quadratic
This asks for the rate expression when a square coefficient, a negative linear coefficient, and a constant all occur. Find the difference quotient of f(x) = 6 − 7x + 2.
Show the steps and the answer
change = 12xh + 6 − 7h
rate = 12x + 6h − 7
- .Replace every x by the whole new input.
- (xh ) xh .The square expansion is multiplied term by term by 6, and −7 reaches both input pieces.
- Output change: (xh ) .Keep all three original terms grouped for subtraction.
- xh .The starting terms +6, −7x, and +2 all reverse signs.
- xh .The matching h-independent polynomial terms cancel. Each remaining term is h times 12x, 6h, or −7.
- , with .Cancel the nonzero multiplier of the whole numerator.
Rung 7 of 7
Difference quotient of 4 with a negative step
Let f(x) = 4. The graph of y = 4 passes through (1, 4) and (2, 16). (a) Find and simplify the difference quotient for h ≠ 0. (b) Use your result with x = 2 and the negative step h = −1. This gives the slope of the secant line through (2, 16) and (1, 4).
Show the steps and the answer
- Plug in: (xh ) xh .Every x is replaced by (x + h). The square expands as + 2xh + , and the outside coefficient 4 multiplies every expanded term.
- Subtract: (xh ) xh .All of f(x) goes in parentheses after the minus sign, so its sign flips.
- Simplify: , so the numerator is 8xh .The terms that do not contain h cancel, which always happens in a difference quotient.
- Cancel h: , for .Factor h from the whole numerator first, then cancel it. The cancellation is allowed only because h ≠ 0.
- Use the negative step: with and .The formula holds for any nonzero h, negative values included. Here x + h = 1, so the result is the slope between x = 2 and x = 1.
Work to write
- f(x + h) = 4(x + h = 4 + 8xh + 4
- f(x + h) − f(x) = 4 + 8xh + 4 − 4 = 8xh + 4
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Square first, multiply the outside number second. Keep those two actions on separate lines.
- Write the matching pairs in the subtraction so each canceled term has a visible partner.
- Meaning matters: x is where you start, and h is the signed amount the input changes.
- A square-area picture uses positive lengths; an algebraic square identity also accepts negative values.
- Keep h ≠ 0 beside the answer, even after h has canceled.
7 The trap
Losing the middle term, squaring an outside coefficient, or forgetting that ÷ h = h. Show the full square expansion before subtracting.
Lesson 7 of 10
Difference quotient of a fraction
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
When the input sits in the bottom of a fraction, the output change becomes one fraction minus another with different bottoms. Think of converting two currencies into the same currency before subtracting: you cannot compare the counts while they use different-sized units. Give the fractions one common bottom by multiplying their original bottoms. Multiply each top by the missing bottom too, so its value stays unchanged. Then subtract only the tops, keeping the second top in parentheses. In the reciprocal examples, the new top has an h factor. Dividing by the input step means multiplying by the fraction 1 over h, and that whole factor can cancel. Keep every forbidden zero bottom.
2 Picture it
Reminder
Reminder: Multiplication by 1, A common denominator, Dividing by a nonzero letter, Subtracting a grouped top
- Multiplication by 1. = 1 only for x ≠ 0. This is why multiplying both top and bottom by x preserves a fraction.
- A common denominator. − = − = . Rename fractions before subtracting.
- Dividing by a nonzero letter. A ÷ h = A · for h ≠ 0. Dividing reverses multiplication.
- Subtracting a grouped top.
3 Why
A common bottom names the same-sized pieces, so their counts can be subtracted. Multiplying top and bottom by the same nonzero expression multiplies by 1 and preserves the value. For , the common-bottom top is 2x − 2(x + h) = 2x − 2x − 2h = −2h. This shows the cancellation directly, rather than assuming every kind of function must look like a polynomial. Dividing by h multiplies by , because that undoes multiplication by h. The restrictions remain necessary even after a factor disappears.
4 The rule
For , combine the output difference over , then divide by h to obtain .
Require , and . Other fraction bottoms need their own product as the common bottom.
The same idea, five ways
Say 'make the output fractions use one bottom, subtract their tops, then divide by the step'.
A fractional difference quotient uses the usual endpoint-rate formula with an extra common-denominator step.
- For f(x) = : rate =
- h ≠ 0; x ≠ 0; x + h ≠ 0
- For h > 0: [x, x + h]; for h < 0: [x + h, x]
Convert two amounts to matching-sized units before subtracting, then share the difference over the input change.
The same idea, other ways
− = − = . The common bottom changes the piece size but not either fraction's value. The worked numerical part shows how each missing factor is chosen.
The fraction means 2 divided by the whole x + h. The bar groups that bottom like parentheses. You do not split it into plus .
means 2 ÷ (x + h)
whole bottom stays grouped
For , the starting output needs x ≠ 0, the ending output needs x + h ≠ 0, and the rate needs h ≠ 0. These are three separate restrictions, even though the final formula has no isolated h in its bottom.
start: x ≠ 0
end: x + h ≠ 0
step: h ≠ 0
Part 1: Common-denominator arithmetic before letters
The top of a fraction is its numerator, counting pieces. The bottom is its denominator, naming their size. Rename both fractions with the same bottom before subtracting.
- Never subtract fraction bottoms.
- Multiplying a top and bottom by the same nonzero value preserves the fraction.
Worked example
Common bottoms with numbers before letters
This asks how to subtract two fractions with different bottoms. Find − .
Show the steps and the answer
- Use common bottom .Neither bottom divides the other; their product gives a bottom both fractions can use.
- , and .Multiply each top and bottom by its missing factor: 5 for the first fraction and 3 for the second.
- .With equal bottoms, subtract only the tops and keep the common bottom.
Part 2: A sum in the bottom
A bottom such as x + 2 remains one grouped expression. Substitute into the entire bottom and use both resulting bottoms in the common product.
- For , the bottoms are x + 2 and x + h + 2.
- Require x ≠ −2 and x + h ≠ −2, as well as h ≠ 0.
Worked example
Difference quotient of f(x) =
Let f(x) = . Find and simplify the difference quotient . State every restriction on x and h.
Show the steps and the answer
- Plug in: .Every x, including the one below the fraction bar, is replaced by the whole new input x + h. The 2 multiplies both x and h.
- Set up the subtraction: .The difference quotient starts with the new output minus the original output.
- Use the common bottom : .The common bottom is the product of the two original bottoms. Each top is multiplied by the factor its own bottom is missing. The second top stays grouped so the minus sign applies to all of it.
- Distribute: .The outside minus changes the sign of every term in the second product. Then 10x − 10x = 0 and 15 − 15 = 0, which leaves only −10h.
- Divide by h: .Dividing by h is the same as multiplying by . Here h is a whole factor of the numerator and h ≠ 0, so it cancels.
- State the restrictions: (so ), and (so ).The original quotient divides by h. Both f(x) and f(x + h) must be defined, so neither bottom can be zero. These restrictions still hold after cancelling.
Work to write
Part 3: A fixed starting input
The same method works when the start is the number 2. The bottom at the start is then 3, and the bottom at the end is 3 + h.
- For b(x) = starting at 2, rate = .
- Require h ≠ 0 and h ≠ −3.
Worked example
Difference quotient of starting at x = 5
Let f(x) = . Find and simplify the difference quotient . State every restriction on h.
Show the steps and the answer
- Plug in: , and .Every x, including the one below the fraction bar, is replaced by the whole new input. f(5) is left as so that both outputs are fractions with visible bottoms.
- Subtract: .The product of the two bottoms, 3(h + 3), is a common bottom. Each top is multiplied by the factor its bottom lacks. The second top, 6(h + 3), stays grouped so the minus sign applies to all of it.
- Simplify the numerator: . The difference is .Distributing the minus over the grouped term changes the sign of each piece. The constants 18 and −18 then cancel.
- Divide by h: .Dividing by h is the same as multiplying by . Since h ≠ 0, the whole factor h cancels. Finally reduces to −2.
- State the restrictions: and .The quotient has h in its bottom, so h ≠ 0. The input 5 + h must not equal 2, which would make the bottom of f zero, so h ≠ −3. Both restrictions remain after simplifying.
Work to write
- f(5 + h) = and f(5) =
- Numerator: 18 − 6h − 18 = −6h
- Restrictions: h ≠ 0, h ≠ −3
Part 4: The input in both top and bottom
Every occurrence of the input must change. A common bottom can create two products on top, so multiply out both before combining their difference.
- For , substitute x + h above and below the bar.
- The common top simplifies to h, giving rate .
- Require h ≠ 0, x ≠ −1, and x + h ≠ −1.
Worked example
The input also appears in the top
This asks for an average-rate formula when the input occurs above and below the fraction bar. Find the difference quotient of f(x) = .
Show the steps and the answer
common bottom:
(x + 1)(x + h + 1)
combined top simplifies to h
- Require , and .The step and both original function bottoms must be nonzero.
- , and .The new input replaces both occurrences of x in the first output.
- Use common bottom . The first top becomes , and the second becomes .Each top gets multiplied by the whole bottom missing from its own fraction.
- The combined top is .After the bottoms match, subtract the entire second top.
- xh .Each term of the first parentheses multiplies each term of the second.
- xh .The outside x multiplies all three terms inside.
- The combined top is ( xh ) ( xh ) xh xh .Distribute the outside minus, then cancel the matched , xh, and x terms.
- The output change is . Divide by h: .The common nonzero multiplier h cancels from the multiplied fraction.
5 How
- Plug in: replace every input occurrence, including those below a fraction bar, by the whole new input.
- Subtract: use the product of the original bottoms as a common bottom, multiply each top by its missing factor, and keep the second top grouped.
- Simplify: distribute the outside minus and combine the numerator terms.
- Cancel a valid h factor: multiply by , cancel only a whole nonzero factor, and keep all original restrictions.
The fractional difference quotient in four moves
- Plug in and record every nonzero-bottom condition.
- Subtract using a common bottom for the two output fractions.
- Simplify the combined top while leaving the bottom as a product.
- Divide by the step through multiplication by , and cancel only a whole factor.
6 Worked example
Worked example
Difference quotient with x in the denominator
This asks for a reusable average-rate formula when the input is in a fraction bottom. Find for f(x) = .
Show the steps and the answer
- Require , and . Write and .The outer division by h and both original function outputs need nonzero denominators.
- The output change is . Use common bottom .The two bottoms are different, so both fractions must be renamed using the same-sized pieces before subtracting.
- .Multiply the first top and bottom by x; since x ≠ 0, this multiplies the value by = 1.
- .Multiply the second top and bottom by x + h; its nonzero condition makes this multiplication by 1.
- Subtract the tops: .The common bottom stays fixed. Keep the whole second top grouped so the minus reaches both pieces.
- .Distribute 2 inside the second top, then distribute the outside minus to +2x and +2h. The +2x and −2x cancel.
- Divide by the input change h: .Dividing by nonzero h is multiplying by its reciprocal, so this multiplication compares the output change with the input step.
- .Multiply tops and bottoms. The whole numerator −2h and denominator both contain the nonzero factor h, which cancels.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
The unit reciprocal
This asks for the average-rate expression for the reciprocal function. Find the difference quotient of f(x) = .
Show the steps and the answer
- Require , and . The output change is .All three original divisions need nonzero bottoms.
- Use common bottom : and .Multiply the first top and bottom by x and the second top and bottom by x + h; both multipliers are nonzero.
- Subtract: .The second top stays in parentheses until its minus reaches both x and h.
- Divide by h: .Multiplying by the reciprocal divides the output change by the input step.
- .The nonzero factor h cancels; the minus sign remains.
- , also written −.
- Require h ≠ 0, x ≠ 0, and x + h ≠ 0.
Rung 2 of 5
A constant numerator of 2
This asks for a reusable average-rate formula when the input is in a fraction bottom. Find for f(x) = .
Show the steps and the answer
- Require , and . Write and .The outer division by h and both original function outputs need nonzero denominators.
- The output change is . Use common bottom .The two bottoms are different, so both fractions must be renamed using the same-sized pieces before subtracting.
- .Multiply the first top and bottom by x; since x ≠ 0, this multiplies the value by = 1.
- .Multiply the second top and bottom by x + h; its nonzero condition makes this multiplication by 1.
- Subtract the tops: .The common bottom stays fixed. Keep the whole second top grouped so the minus reaches both pieces.
- .Distribute 2 inside the second top, then distribute the outside minus to +2x and +2h. The +2x and −2x cancel.
- Divide by the input change h: .Dividing by nonzero h is multiplying by its reciprocal, so this multiplication compares the output change with the input step.
- .Multiply tops and bottoms. The whole numerator −2h and denominator both contain the nonzero factor h, which cancels.
Rung 3 of 5
Difference quotient when the bottom is x + 2
Let f(x) = . Find and simplify the difference quotient . State every restriction on x and h.
Show the steps and the answer
- Plug in: , so the difference quotient is .Every x, including the one inside the bottom x + 2, is replaced by the whole new input x + h.
- Subtract using the common bottom (x + h + 2)(x + 2): .The common bottom is the product of the two original bottoms. Each top is multiplied by the factor its bottom is missing. The second top, 3(x + h + 2), stays grouped so the minus applies to all of it.
- Simplify the top: . The difference is .Distributing the outside minus changes the sign of every term in the second group. The 3x terms cancel and the 6 terms cancel, leaving only −3h.
- Divide by h: .Dividing by h is multiplying by . h is a whole factor of the top, and h ≠ 0, so it cancels. The original restrictions still hold after the cancellation.
- Record the restrictions: , and .h ≠ 0 because we divided by h. The bottom x + 2 cannot be 0, so x ≠ −2. The bottom x + h + 2 cannot be 0, so x + h ≠ −2.
Work to write
Rung 4 of 5
Difference quotient of f(x) = starting at x = 3
Let f(x) = . Find and simplify the difference quotient . State every restriction on h.
Show the steps and the answer
- Plug in: and .Every x, including the one below the fraction bar, is replaced by the whole new input. The fraction stays unreduced so that both terms are still fractions with their own bottoms.
- Subtract over the common bottom 2(h + 2): .The product of the original bottoms is a common bottom. Each top is multiplied by the factor its bottom is missing. The second top stays grouped so that the minus sign applies to all of it.
- Simplify: .Distributing the minus gives 8 − 4h − 8. The constants cancel and leave −4h. Then the common factor 2 is reduced.
- Divide by h: , with and .Dividing by h is the same as multiplying by . The whole factor h cancels only because h ≠ 0. The restriction h ≠ −2 comes from the original bottom (3 + h) − 1 ≠ 0, and it stays even though h itself has cancelled.
Work to write
Rung 5 of 5
The input also appears in the top
This asks for an average-rate formula when the input occurs above and below the fraction bar. Find the difference quotient of f(x) = .
Show the steps and the answer
common bottom:
(x + 1)(x + h + 1)
combined top simplifies to h
- Require , and .The step and both original function bottoms must be nonzero.
- , and .The new input replaces both occurrences of x in the first output.
- Use common bottom . The first top becomes , and the second becomes .Each top gets multiplied by the whole bottom missing from its own fraction.
- The combined top is .After the bottoms match, subtract the entire second top.
- xh .Each term of the first parentheses multiplies each term of the second.
- xh .The outside x multiplies all three terms inside.
- The combined top is ( xh ) ( xh ) xh xh .Distribute the outside minus, then cancel the matched , xh, and x terms.
- The output change is . Divide by h: .The common nonzero multiplier h cancels from the multiplied fraction.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The fraction bar groups the entire bottom: means 2 ÷ (x + h).
- Leave the common bottom as a product so its nonzero factors and any cancellations stay visible.
- Show the combined top before opening the parentheses. In 2x − 2(x + h), the minus must reach both 2x and 2h.
- Check with x = 2 and h = 3, provided every original bottom is nonzero.
- A formula built from endpoint values does not describe values at an input where the original function is undefined; keep domain gaps in mind when interpreting the interval.
7 The trap
Subtracting bottoms, splitting a denominator sum, or losing the minus on the second numerator. Use a common bottom, subtract the whole second top, then divide by h.
Lesson 8 of 10
Increasing, decreasing, and constant
Open this lessonLeans on 1Comes back in 0
Leans on
Comes back in
No lesson links recorded.
1 In plain words
Picture a hiking trail seen from the side. You walk toward the right and watch its height. A stretch is increasing when every move right takes you higher, decreasing when every move right takes you lower, and constant when the height stays the same. The height can be below zero and still rise. You name each stretch by its inputs, the positions along the horizontal axis, rather than its heights. A turning point is where the graph switches between rising and falling. This course reports behavior using open intervals, which leave the boundary inputs out. That reporting convention describes stretches. It does not make an endpoint disappear from the function's domain.
2 Picture it
Reminder
Reminder: Interval notation, Subtracting negatives, Point coordinates
- Interval notation. (1, 3) means 1 < x < 3. [1, 3] includes the endpoints. Infinity always has a parenthesis.
- Subtracting negatives. −1 − (−2) = −1 + 2 = 1: output −1 is an increase from −2.
- Point coordinates. In (2, 5), 2 is the horizontal input and 5 is the vertical output.
3 Why
Choose any two inputs a < b within one stretch. The change in input, b − a, is positive. If f(b) > f(a), the change in output is positive, so the average rate of change is positive. If f(b) < f(a), that rate is negative. Equal outputs give rate 0. This explains the three rows of the table. The letters a and b name any two inputs, rather than fixed endpoints to solve for. We split a graph at turns, flat boundaries, and breaks because a single label must describe the entire stretch between them.
4 The rule
On an interval, whenever a < b: increasing means f(a) < f(b); decreasing means f(a) > f(b); constant means .
This course reports intervals of behavior with open endpoints. These are comparisons between inputs, not a direction assigned to one point.
The same idea, five ways
'the output rises, falls, or stays the same as the input moves right.'
'f is increasing on (1, 3), decreasing on (3, 4), and constant on (4, 5).'
- 1 < x < 3
- (1, 3)
- {x : 1 < x < 3}
- If 1 < a < b < 3, then f(a) < f(b).
- Decreasing: a < b gives f(a) > f(b).
- Constant: a < b gives f(a) = f(b).
Walk east along an uphill, downhill, or level trail.
The same idea, other ways
On y = , you move downhill toward 0 from the left, then uphill after 0. The vertex is the turning point of this U shaped graph, called a parabola. The heights are positive on both sides, but one side decreases and the other increases.
For f(x) = on (0, ∞), let a = 1 and b = 3. Then f(1) = 1 < 9 = f(3). The letters are names for those inputs. On (−∞, 0), inputs −3 and −1 move right while outputs 9 and 1 move down.
The gas-price columns rise at each recorded year from 2005 through 2008, fall from 2008 to 2009, and rise at each recorded year afterward. These are sampled yearly data. They describe recorded changes and do not tell you the price at every time between the recorded years.
The behavior table links each direction to the sign of every average rate taken within that stretch. The drawn columns repeat all three comparisons.
| Graph moving left to right | Name | Sign of every average rate of change there |
|---|---|---|
| climbs | increasing | positive |
| drops | decreasing | negative |
| stays level | constant | zero |
Part 1: Increasing: larger inputs give larger outputs
Think of walking up a ramp. You can begin below street level and still climb. Increasing describes the direction of the outputs as the inputs move right.
- Any a < b within the interval gives f(a) < f(b).
- Every average rate of change within that interval is positive.
- Increasing does not mean positive outputs.
Worked example
Increasing below zero
For f(x) = x on (−3, 0), name the output's direction.
Show the steps and the answer
- and , so these outputs rise.−2 < −1, and −1 is greater than −2.
- The line rises throughout the interval: increasing on .For this formula any larger input is itself a larger output.
Part 2: Decreasing: larger inputs give smaller outputs
Walking down a ramp lowers your height as you move forward. On a decreasing stretch, the output becomes smaller as the input becomes larger, even when every output stays above zero.
- Any a < b within the interval gives f(a) > f(b).
- Every average rate of change within that interval is negative.
Worked example
Positive heights can decrease
Read the direction of f(x) = 6 − 2x on (0, 3).
Show the steps and the answer
- At the height is 4; at it is 2.6 − 2(1) = 4 and 6 − 2(2) = 2.
- Report decreasing on (0, 3).Every larger input subtracts a larger amount from 6.
Part 3: Constant: the output stays level
Imagine a shelf at one fixed height. Walking along it changes your position but never its height. Constant means every input in the stretch produces the same output.
- Any a < b within the interval gives f(a) = f(b).
- Every average rate of change there is 0.
- A constant stretch is neither strictly increasing nor strictly decreasing.
Worked example
Finding the level stretches on a water-tank graph
A graph shows the water depth h(t), in feet, in a tank, where the horizontal axis is labeled t (time in hours). The graph is made of straight segments with no breaks. It starts at a closed dot at (0, 2) and rises straight to (3, 5). It stays level at depth 5 from (3, 5) to (7, 5). It falls straight from (7, 5) to (9, 1). It stays level at depth 1 from (9, 1) to a closed dot at (12, 1), where the graph ends. Using open intervals of t, give where h is increasing, where h is decreasing, and where h is constant.
Show the steps and the answer
- Read the horizontal-axis label. The input is t (hours), so every interval is an interval of t-values, not depths.Intervals of behavior are always reported as intervals of the input variable.
- Mark the turning inputs and flat boundaries: (rising becomes level), (level becomes falling), and (falling becomes level). There are no breaks.The behavior can only change at these inputs, so they split the graph into separate stretches.
- Mark the domain ends: closed dots at and . Both boundaries are finite, and no interval may use infinity.A finite end dot gives a finite boundary. Only arrows or stated continuation justify infinity.
- On 0 to 3, moving right, the depth goes from 2 up to 5. Whenever a < b there, h(a) < h(b), so h is increasing.Increasing means larger inputs always give larger outputs.
- On 3 to 7, the depth stays at 5. For any a < b there, , so h is constant.Constant means every pair of inputs in the stretch gives equal outputs.
- On 7 to 9, the depth goes from 5 down to 1. Whenever a < b there, h(a) > h(b), so h is decreasing.Decreasing means larger inputs always give smaller outputs.
- On 9 to 12, the depth stays at 1. For any a < b there, , so h is constant again.This is a second level stretch. It is separate from the first because a decreasing stretch lies between them.
- Write each behavior with open endpoints: increasing (0, 3); decreasing (7, 9); constant (3, 7) and (9, 12), written .This course reports intervals of behavior with open endpoints. The two constant stretches are joined piece by piece with 'and' or ∪, never merged into (3, 12).
Work to write
- Input variable: t
- Increasing: (0, 3)
- Decreasing: (7, 9)
- Constant: (3, 7) ∪ (9, 12)
5 How
- Begin at the left of the whole given graph. Read the horizontal-axis label: the input might be x or t.
- Mark turning inputs, flat boundaries, and breaks.
- Mark actual domain ends. A finite end dot gives a finite boundary; arrows or stated continuation can justify infinity.
- Move right within each separate stretch. Name it increasing, decreasing, or constant.
- Write open intervals of inputs. Keep pieces on opposite sides of a break separate.
- Give each requested behavior on its own line. Say 'and' between stretches; ∪ joins the listed stretches piece by piece.
Read, split, name each stretch
- Find the input axis and actual domain ends.
- Split at turns, flat boundaries, and gaps.
- Read left to right on each separate piece.
- Write open intervals of inputs.
6 Worked example
Worked example
Reading increasing and decreasing intervals from a downward parabola
The graph shows y = f(x), where f(x) = -(x - 2 + 3. The horizontal axis is labeled x. The graph is a parabola that opens downward. Its highest point (turning point) is at (2, 3). It also passes through (0, -1), (1, 2), (3, 2) and (4, -1). Arrows on both ends show that the graph continues forever to the left and to the right, so the domain is all real numbers. State the open interval(s) on which f is increasing, the open interval(s) on which it is decreasing, and any interval on which it is constant.
Show the steps and the answer
- Start at the far left of the graph and read the horizontal-axis label. It is x, so every interval is written in terms of x-values.Intervals of behavior describe inputs, so we must know which variable is the input.
- Mark the turning input , where the graph changes from rising to falling at (2, 3). There are no flat stretches and no breaks.Behavior can only change at turning inputs, flat boundaries or breaks, so these split the domain into stretches.
- Mark the domain ends. Both ends carry arrows, so the graph continues without end in both directions. The left boundary is and the right boundary is .Arrows show the graph continues, which justifies using infinity instead of a finite endpoint.
- Move right through the stretch from to 2. Here the graph rises. For example, at 0 < 1 we have . This stretch is increasing.Increasing means that whenever a < b on the interval, f(a) < f(b).
- Move right through the stretch from 2 to . Here the graph falls. For example, at 3 < 4 we have . This stretch is decreasing.Decreasing means that whenever a < b on the interval, f(a) > f(b).
- Look for a stretch where the output stays the same. There is none, because the curve never runs level over an interval.Constant requires f(a) = f(b) for all a < b in an interval. A single highest point is not an interval.
- Write each behavior on its own line, using open intervals of x: increasing on , decreasing on , constant on no interval.This course reports intervals with open endpoints. The turning input x = 2 belongs to neither stretch.
Work to write
- Turning input: x = 2 (highest point at (2, 3)); arrows on both ends, so the domain is (-∞, ∞)
- Increasing on (-∞, 2)
- Decreasing on (2, ∞)
- Constant: on no interval
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 6
Reading one rising line: where is it increasing, decreasing, or constant?
The graph shows y = g(x), where g(x) = x + 1. The horizontal axis is labeled x. The graph is a straight line with arrows at both ends, so it continues forever to the left and to the right. It passes through (-4, -1), (0, 1) and (2, 2). Give the open intervals on which g is increasing, decreasing, and constant.
Show the steps and the answer
- Start at the far left of the graph and read the horizontal-axis label: the input is x.Intervals of behavior are written in terms of the input, so we must know which variable the intervals describe.
- Look for turning inputs, flat stretches, and breaks. There are none. The graph is one unbroken straight line with slope .A non-vertical line with nonzero slope never changes direction and never levels off, so there are no boundaries inside it.
- Check the domain ends. Both ends have arrows, so the domain runs from to .Arrows show that the graph continues without end, which justifies using infinity. A finite end dot would have given a finite boundary instead.
- Move right along the single stretch. Compare the inputs : and , and . The outputs rise as x moves right, so the stretch is increasing.Increasing means that whenever a < b, f(a) < f(b). A positive slope makes this true for every pair of inputs on the line.
- Write the behavior as an open interval of inputs: increasing on .This course reports intervals with open endpoints, and ∞ is never included in any case.
- Report each requested behavior on its own line. Decreasing: none. Constant: none.No pair of inputs a < b gives g(a) > g(b) or g(a) = g(b), so neither behavior occurs anywhere.
Work to write
- Input variable: x; no turning points, flat stretches, or breaks
- Domain: arrows at both ends, so (-∞, ∞)
- Increasing on (-∞, ∞)
- Decreasing: none
- Constant: none
Rung 2 of 6
A parabola that opens upward with its turn at x = -3
The graph shows y = h(x), where h(x) = (x + 3 - 2. The horizontal axis is labeled x. The graph is a parabola that opens upward, with arrows on both ends, so it continues forever to the left and to the right. Its lowest point (turning point) is at (-3, -2). It also passes through (-7, 6), (-5, 0), (-4, -1.5), (-2, -1.5), (-1, 0) and (1, 6). Give the open intervals where h is increasing, decreasing, and constant.
Show the steps and the answer
- Read the horizontal-axis label. It is x, so every interval will be a set of x-values.Intervals of behavior describe inputs. They do not describe outputs.
- Mark the turning input: the lowest point is , so mark . There are no flat pieces and no breaks.The graph can change from falling to rising only at a turning input. Flat boundaries and breaks would also split stretches, but this graph has none.
- Check the domain ends. Both ends have arrows, so the inputs run from to .Arrows show that the graph continues without end. That justifies using -∞ and ∞ as boundaries.
- Move right on the stretch left of . Take : and , so . Also . Name this stretch decreasing.Decreasing means that whenever a < b, f(a) > f(b). The outputs fall as the inputs grow.
- Move right on the stretch right of . Take : and , so . Also . Name this stretch increasing.Increasing means that whenever a < b, f(a) < f(b). The outputs rise as the inputs grow.
- Write the open intervals: decreasing on and increasing on . No stretch is constant.This course reports intervals with open endpoints. The turning input x = -3 is not placed in either interval, because a single point has no direction by itself. No two different inputs give equal outputs along a stretch, so there is no constant interval.
- Increasing: (-3, ∞)
- Decreasing: (-∞, -3)
- Constant: none
Work to write
- Horizontal axis is x; turning input x = -3; arrows on both ends
- Decreasing on (-∞, -3)
- Increasing on (-3, ∞)
- Constant: none
Rung 3 of 6
A parabola that stops at two solid end dots
The graph shows y = p(t), where p(t) = (t - 1 - 4, drawn only for -2 ≤ t ≤ 3. The horizontal axis is labeled t. The graph is a parabola that opens upward. It starts at a solid (filled) dot at (-2, 5) and ends at a solid (filled) dot at (3, 0). There are no arrows. Its lowest point (turning point) is at (1, -4). It also passes through (-1, 0), (0, -3) and (2, -3). State the open intervals on which p is increasing, decreasing, and constant.
Show the steps and the answer
- Start at the left end of the graph and read the horizontal axis. It is labeled t, so every interval is an interval of t-values.Intervals of behavior describe inputs, and the input variable here is t, not x.
- Mark the turning input , where the lowest point is. There are no flat pieces and no breaks.Behavior can change only at turning inputs, at the ends of flat pieces, or at breaks.
- Mark the domain ends and . Both are solid end dots and there are no arrows.A finite end dot gives a finite boundary. Without arrows the graph does not continue, so -∞ and ∞ are not used.
- Move right from to . The heights go 5, 0, , so this stretch is decreasing.For a < b in this stretch, p(a) > p(b). For example, p(-1) = 0 > p(0) = -3.
- Move right from to . The heights go , 0, so this stretch is increasing.For a < b in this stretch, p(a) < p(b). For example, p(2) = -3 < p(3) = 0.
- Write each stretch as an open interval of t: decreasing on and increasing on (1, 3). No stretch is constant.This course reports intervals of behavior with open endpoints, even when the end dots are solid. No two inputs in any stretch give equal outputs, so p is never constant.
- Increasing: (1, 3)
- Decreasing: (-2, 1)
- Constant: none
Work to write
- Input variable: t
- Turning input: t = 1; domain ends: t = -2 and t = 3 (solid dots, no arrows)
- Increasing on (1, 3)
- Decreasing on (-2, 1)
- Constant: none
Rung 4 of 6
A break splits the branches
Read the behavior of f(x) = . Why are there two decreasing intervals?
Show the steps and the answer
- Exclude input 0. has no value.
- On the left, outputs at and fall from to ; on the right, outputs at 1 and 2 fall from 1 to .Each branch decreases as its inputs move right.
- Keep and separate.No connected behavior interval can cross the missing input 0.
- Decreasing on (−∞, 0) and on (0, ∞), each branch separately.
- Increasing on no interval.
- Constant on no interval.
Rung 5 of 6
A level stretch between sloping pieces
The connected straight pieces continue at both ends. They fall to (−3, −1), rise to (0, 4), stay at height 4 until x = 2, then rise again. Report all behaviors.
Show the steps and the answer
- Mark , 0, and 2.Those inputs bound changes in direction or flatness.
- Read down, up, level, up as you move right.These are the directions of the given pieces.
- List the flat interval separately.Equal outputs there fail the strictly increasing comparison.
- Decreasing on (−∞, −3).
- Increasing on (−3, 0) and (2, ∞).
- Constant on (0, 2).
Rung 6 of 6
Ends, a turn, and a level piece
This complete graph consists of straight segments joining corners (−4, −1), (−2, 3), (1, −2), (3, −2), and (5, 4). It stops at included endpoints. Report all behaviors.
Show the steps and the answer
- Mark endpoints and 5 and inner boundaries , 1, and 3.Those inputs split the given segments.
- Read up, down, level, up across the successive segments.The segments connect the stated corners with no additional turns.
- Keep the two rising intervals separate and finite.The falling and level intervals lie between them and the graph stops.
- Increasing on (−4, −2) and (3, 5).
- Decreasing on (−2, 1).
- Constant on (1, 3).
- Domain: [−4, 5].
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Read right, then name the height's direction.
- Put inputs on interval boundaries and keep outputs for heights.
- Use 'and' between behavior pieces. With ∪, mean the listed intervals piece by piece, especially across a gap.
- Use the stated domain, endpoint marks, and arrows to distinguish an actual end from a viewing-window edge.
7 The trap
Writing the intervals in y-values, for example 'increasing from −2 to 5' because the heights run from −2 to 5. Intervals of increase and decrease are always inputs (x-values or t-values), read along the horizontal axis.
Lesson 9 of 10
Local maxima and minima
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Think of one hill on a roller coaster. Its top can beat nearby heights even when a taller hill stands farther away. That is what local means: compare close neighbors on both sides. At a hilltop point (−2, 16), the local maximum is the height 16, and it occurs at input x = −2. A valley gives a local minimum in the same way. Relative maximum and relative minimum are other names for these ideas. Together they are local extrema. Rising then falling gives a hilltop; falling then rising gives a valley. The formal rule below also allows tied nearby heights, so a flat stretch needs separate attention.
2 Picture it
Reminder
Reminder: Ordered pairs, Comparing negatives, Squaring and substitution
- Ordered pairs. (−2, 16) means input −2, output 16. f(−2) = 16 says the same thing.
- Comparing negatives. −1.633 is greater than −1.667 because it is closer to zero on the number line.
- Squaring and substitution. (−2 = 4, but −(−2 = −4. Parentheses keep the substituted input together.
3 Why
Near a hilltop, points on the left are lower because the curve climbs toward the top; points on the right are lower because it falls away. This makes the top higher than nearby points on both sides. A valley reverses those comparisons. We compare within an open interval around the input, so an endpoint without domain points on both sides does not qualify under this text's definition. The value is an output because maximum and minimum describe height. The rule uses 'at least' and 'at most,' so equal nearby heights are allowed; strict hilltops and valleys are the turning cases.
4 The rule
A local maximum at input b has for every x in some open interval around b contained in the domain.
A local minimum has there. Its value is f(b); its location is b; its point is (b, f(b)). Equal nearby heights are allowed by these nonstrict inequalities. A strict local extremum uses > or < for every nearby .
The same idea, five ways
'local maximum of 16 at x = −2' and 'local minimum of −16 at x = 2.'
'The local maximum value is 16; it occurs at input −2, at point (−2, 16).'
- Location: b.
- Value: f(b).
- Point: (b, f(b)).
- Local maximum: f(b) ≥ f(x) for all x in a small open domain interval around b.
- Local minimum: f(b) ≤ f(x) in that neighborhood.
The tallest or shortest house within your neighborhood, with nearby houses on both sides.
The same idea, other ways
For the given curve f(x) = − 12x, the hilltop point is (−2, 16) and the valley point is (2, −16). The ends continue past those heights. These turns can be local extrema without being the whole graph's highest or lowest outputs.
The tallest house on your block need not be the tallest in the whole city. A local maximum compares within one neighborhood of inputs. The neighborhood must include domain points to the left and right, as visiting houses on both sides of your address would.
For f(x) = 3 − (x − 2, the square is never negative. Thus f(x) ≤ 3 for every input, and f(2) = 3. At any other input the square is positive, so the height is lower than 3. This proves the hilltop comparison, rather than relying on two sample neighbors.
Among adjacent recorded years, the 2008 gas price $3.30 exceeds the 2007 and 2009 prices, while the 2009 price $2.41 is below the 2008 and 2010 prices. These are a sampled peak and dip useful for discussing observed costs. They are not a proof of continuous local extrema between recorded years.
Part 1: Local maximum: hilltop value, input, and point
A hilltop has an address and a height. The input is its address along the axis; the output is its height. A parabola is the U shaped graph of a quadratic, possibly opening down. Its vertex is its turning point.
- Increasing then decreasing gives a strict local maximum.
- A maximum value is an output; its input says where it occurs.
- The formal nonstrict comparison also allows nearby equal outputs.
Worked example
Read a hilltop
For f(x) = 3 − (x − 2, find the local maximum value, where it occurs, and its point.
Show the steps and the answer
- .Input 2 makes the square zero.
- At every different input, , so f(x) < 3.A nonzero real number has a positive square.
- The value is 3, the location is , and the point is (2, 3).The ordered pair puts the input first and the output second.
- Local maximum value: 3.
- Location: x = 2.
- Point: (2, 3).
Part 2: Local minimum: valley value, input, and point
At a valley floor, both nearby sides lead upward. You still give its height and its address separately. Minimum describes the lower output, rather than the smallest input.
- Decreasing then increasing gives a strict local minimum.
- The value is the output at the valley.
- The formal nonstrict comparison allows ties.
Worked example
Read a negative valley
Find the local minimum of f(x) = (x + 1 − 2.
Show the steps and the answer
- .x + 1 equals zero at input −1.
- Every other input gives , so its output exceeds .Adding a positive number to −2 raises it.
- Report local minimum of at .The output supplies the value and the input supplies the location.
- Local minimum of −2 at x = −1.
- Point: (−1, −2).
Part 3: Ties on flat stretches and shoulders
Imagine a level shelf instead of a pointed hill. Its interior has nearby heights equal on both sides. 'At least as high' and 'at most as high' both permit equality, so the formal nonstrict definition can call those points both local types. They are not isolated turning points.
- For a constant function, every interior input is a nonstrict local maximum and a nonstrict local minimum.
- A flat stretch has no strict local extrema, because nearby equal heights fail the greater-than and less-than comparisons.
- A shoulder at the edge of a flat stretch may satisfy one nonstrict comparison without an up-then-down turn. Compare both sides.
Worked example
Proving a strict local maximum on a downward parabola
The graph shows g(x) = −2(x − 1 + 6, defined for all real numbers. Points read from the graph are (−1, −2), (0, 4), (1, 6), (2, 4) and (3, −2). The curve keeps falling to the left of (−1, −2) and to the right of (3, −2). Show that g has a strict local maximum at x = 1. Give its value, its location and its point. Then explain why g has no other local maximum or minimum.
Show the steps and the answer
- Scan the listed points from left to right. The heights go , 4, 6, then fall to 4 and .A local maximum shows up where the graph changes from rising to falling. Here that change happens at x = 1.
- Check for flat stretches. The heights on either side of are 4 and 4. Both are less than 6. The curve is a parabola, so it has no flat pieces.The nonstrict rule allows equal nearby heights. A strict maximum needs every nearby height to be lower, so we must rule out ties.
- Choose the open interval (0, 2) around . It lies inside the domain, which is all real numbers, so there are inputs on both sides of 1.A local extremum needs a neighbourhood inside the domain on both sides of b. An endpoint would not qualify.
- Prove the strict inequality algebraically. For any . Multiplying by gives . Adding 6 gives .A strict local maximum needs g(1) > g(x) for every nearby x ≠ 1. The algebra shows this holds for every x ≠ 1 in (0, 2), and in fact for every real x ≠ 1.
- Read the location as the input and the value as the output . The point is (1, 6).The location is the horizontal input b, the value is f(b), and the point is the pair (b, f(b)).
- Look at every other input . If c < 1, the graph is still rising at c, so slightly to the right of c it is higher. If c > 1, the graph is falling at c, so slightly to the left of c it is higher. No turn from falling to rising occurs anywhere.At every c ≠ 1 there is a higher point arbitrarily close, so c cannot be a local maximum. With no change from falling to rising, there is no local minimum.
Work to write
- Rising then falling at x = 1: heights 4, 6, 4
- Neighbourhood (0, 2) lies in the domain on both sides of 1
- For x ≠ 1: (x − 1 > 0, so −2(x − 1 < 0, so g(x) < 6 = g(1)
- Strict local maximum at x = 1, value 6, point (1, 6)
- No other local extrema: no other change of direction
Part 4: Read supplied estimates without a graphing calculator
A supplied graph may place a turn between labeled grid lines. Read its input and height as estimates. Checking nearby formula values can catch a misread sign or height, but a few samples cannot prove where every turn occurs.
- The supplied graph of f(x) = + has a local maximum near (−2.449, −1.633) and a local minimum near (2.449, 1.633), with coordinates rounded.
- The local maximum may be lower than a different local minimum, because the comparisons are in separate neighborhoods.
- Input 0 is excluded, so behavior intervals must split there.
Worked example
Checking both branches of estimated heights for local extrema
A function f is defined only on the interval [-3, 3]. Between consecutive integer inputs its graph rises or falls steadily, with no extra bumps. Estimated heights read from the graph are: f(-3) = 2, f(-2) = 5, f(-1) = 7, f(0) = 5, f(1) = 1, f(2) = 3, f(3) = 6. Find every local maximum and local minimum of f. For each one, give its value and its location in a full sentence and state its point (b, f(b)). Explain why the endpoints x = -3 and x = 3 are not counted.
Show the steps and the answer
- Scan the heights from left to right: is rising, is falling, and is rising again.Local extrema can only occur where the graph changes from rising to falling or from falling to rising.
- Mark the turns. At the graph changes from rising to falling. At it changes from falling to rising.Rising then falling identifies an isolated local maximum. Falling then rising identifies an isolated local minimum.
- Check both branches at . On the left, . On the right, . Since the graph climbs steadily up to and descends steadily after it, every x near with has f(x) < 7.A local maximum needs f(b) ≥ f(x) on an open interval around b, on both sides. Here the inequality is strict, so the maximum is strict.
- Check both branches at . On the left, . On the right, . So every x near 1 with has f(x) > 1.A local minimum needs f(b) ≤ f(x) on both sides of b. Again there are no equal heights nearby, so the minimum is strict.
- Look for flat stretches or shoulders. The table shows no repeated heights next to each other, and the graph rises or falls steadily between the table inputs.The nonstrict rule would also allow equal nearby heights, so level stretches must be inspected. There are none here.
- Examine the endpoints. At (height 2) the graph only extends to the right. At (height 6) it only extends to the left.The domain is [-3, 3], so no open interval around -3 or around 3 lies inside the domain. Endpoints are considered separately, for absolute extrema.
- Read the horizontal input as the location and the vertical output as the value. The maximum has location and value 7. The minimum has location 1 and value 1.The location is b, the value is f(b), and the point is (b, f(b)).
Work to write
- Rising then falling at x = -1: f(-2) = 5 < f(-1) = 7 > f(0) = 5
- Falling then rising at x = 1: f(0) = 5 > f(1) = 1 < f(2) = 3
- Local maximum value 7 at x = -1; point (-1, 7)
- Local minimum value 1 at x = 1; point (1, 1)
- x = -3 and x = 3 are endpoints with no interval on both sides, so they are not local extrema
Part 5: Retained sample data for the cubic picture
Sample dots are like a few photographed positions along a trail. They record exact or rounded heights at specific inputs. The given smooth curve supplies its behavior between those photographed positions.
- These tables retain every plotted sample from the original cubic picture and add outer samples past the local heights.
- Noninteger table heights are rounded to two decimal places.
- Finite samples support the stated curve; they do not prove every nearby comparison or every turn.
Worked example
Locating the turns of a cubic from a table of sample heights
The cubic f(x) = − 12x + 4 is defined for all real numbers. Its heights at the integer inputs from −4 to 4 are: f(−4) = −12, f(−3) = 13, f(−2) = 20, f(−1) = 15, f(0) = 4, f(1) = −7, f(2) = −12, f(3) = −5, f(4) = 20. Between consecutive integer inputs the graph rises or falls steadily, with no extra bumps. Find every local maximum and local minimum of f in this window. Give the value and the location of each, and the point (b, f(b)).
Show the steps and the answer
- List the change in height between neighbouring samples: (rise), (rise), (fall), (fall), (fall), (fall), (rise), (rise).A turn shows up as a switch from rising to falling or from falling to rising, so we scan the sign of each change.
- At the graph rises into it () and falls out of it (). Mark as a local maximum.Rising then falling identifies an isolated local maximum. Because the graph changes steadily between integers, every x in the open interval (−3, −1) other than −2 has f(x) < 20.
- At the graph falls into it () and rises out of it (). Mark as a local minimum.Falling then rising identifies an isolated local minimum. On the open interval (1, 3), every x other than 2 has f(x) > −12.
- Check for flat stretches or shoulders. No two neighbouring samples are equal, and every other interior sample lies on a steady rise or a steady fall. So no other input qualifies under the nonstrict rule.The formal rule also allows equal nearby heights. Equal neighbours would be the only way to get an extra local extremum, and there are none here.
- Do not count or . equals the local maximum value, but it is not a turn.The domain is all real numbers, so −4 and 4 are only the edges of the table, not ends of the graph. The cubic keeps falling to the left of −4 and keeps rising to the right of 4, so neither is a turn. Equal heights at different places do not create a new extremum.
- Read each location from the input column and each value from the output column.The location is the horizontal input b, the value is the vertical output f(b), and the point is (b, f(b)).
Work to write
- Heights rise from 13 to 20, then fall to 15, around x = −2, so x = −2 is a local maximum.
- Heights fall from −7 to −12, then rise to −5, around x = 2, so x = 2 is a local minimum.
- x = ±4 are only table edges; the domain is all reals and the graph is still falling or rising there, so they are not extrema.
- The local maximum value is 20 at x = −2, point (−2, 20).
- The local minimum value is −12 at x = 2, point (2, −12).
5 How
- Scan the given graph for changes from rising to falling or falling to rising.
- Rising then falling identifies an isolated local maximum; falling then rising identifies an isolated local minimum.
- Also inspect flat stretches and shoulders when applying the formal nonstrict rule. Compare both sides, including any equal heights.
- Require a domain neighborhood on both sides. An end of the graph is considered separately for absolute extrema.
- Read the horizontal input as the location and the vertical output as the value.
- Give value and location in a full sentence; give the ordered pair if the question asks for the point.
Find local values and locations
- Check changes of direction and any level stretches.
- Compare close domain points on both sides.
- Name maximum or minimum using the correct output comparison.
- Read the value and input separately and report both.
6 Worked example
Worked example
Reading a local maximum from a downward-opening parabola
The graph shows f(x) = -(x - 2 + 5, defined for all real numbers. Points read from the graph are (0, 1), (1, 4), (2, 5), (3, 4) and (4, 1). The curve keeps falling to the left of (0, 1) and to the right of (4, 1). Find every local maximum and local minimum of f. Give each value and location in a sentence, and give the point.
Show the steps and the answer
- Scan the graph from left to right. Through (0, 1) and (1, 4) up to (2, 5) the heights increase: 1, 4, 5. After they decrease: 5, 4, 1.A local extremum shows up where the graph changes from rising to falling or from falling to rising.
- The graph rises and then falls at , so is an isolated local maximum. Nowhere does the graph fall and then rise, so there is no isolated local minimum.Rising then falling marks a local maximum. Falling then rising would mark a local minimum.
- Check for flat stretches or shoulders. There are none. The curve is never level over an interval, and the points on each side of are lower: and . In general for every .The nonstrict rule asks us to compare both sides, including equal heights. Here every nearby height is strictly smaller, so the maximum is strict.
- Confirm the domain. f is defined for all real numbers, so an open interval such as (1, 3) lies around inside the domain. The graph has no endpoints.A local extremum needs domain values on both sides. Ends of a graph are considered separately, for absolute extrema.
- Read the coordinates of the turning point. The horizontal input is 2, which is the location. The vertical output is , which is the value.The location of an extremum is its input b, its value is f(b), and its point is (b, f(b)).
- State the result: f has a local maximum value of 5 at , at the point (2, 5). f has no local minimum.The answer must give the value and the location in a full sentence, plus the ordered pair the question asks for.
Work to write
- The graph rises up to x = 2 and falls after it.
- f(x) ≤ f(2) = 5 for every x in the open interval (1, 3).
- Local maximum value 5 at x = 2, point (2, 5).
- There is no local minimum.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
Read a hilltop
For f(x) = 3 − (x − 2, find the local maximum value, where it occurs, and its point.
Show the steps and the answer
- .Input 2 makes the square zero.
- At every different input, , so f(x) < 3.A nonzero real number has a positive square.
- The value is 3, the location is , and the point is (2, 3).The ordered pair puts the input first and the output second.
- Local maximum value: 3.
- Location: x = 2.
- Point: (2, 3).
Rung 2 of 5
Read a negative valley
Find the local minimum of f(x) = (x + 1 − 2.
Show the steps and the answer
- .x + 1 equals zero at input −1.
- Every other input gives , so its output exceeds .Adding a positive number to −2 raises it.
- Report local minimum of at .The output supplies the value and the input supplies the location.
- Local minimum of −2 at x = −1.
- Point: (−1, −2).
Rung 3 of 5
Reading a local maximum from a downward parabola with its vertex left of the y-axis
The graph shows h(x) = −(x + 1 + 3, defined for all real numbers. Points read from the graph are (−3, −1), (−2, 2), (−1, 3), (0, 2) and (1, −1). The curve keeps falling to the left of (−3, −1) and to the right of (1, −1). Find every local maximum and every local minimum of h. For each local maximum, state its value and its location, and give the point.
Show the steps and the answer
- Scan the listed points from left to right: , 2, 3, 2, . The heights rise from to and fall from to .A local extremum shows up where the graph changes direction, so the first job is to find where rising turns into falling or falling turns into rising.
- The only change of direction is at , where the graph goes from rising to falling. This marks a local maximum at .Rising then falling identifies an isolated local maximum.
- Look for flat stretches or shoulders. There are none: the heights on the left of (for example ) and on the right (for example ) are both below 3, and the curve keeps falling beyond the listed points.The nonstrict rule h(b) ≥ h(x) must be checked on both sides of b, and any equal nearby heights would also need attention.
- Confirm with the formula: for every x, because . Equality holds only at , so the open interval works, and the maximum is strict.The formal definition needs h(b) ≥ h(x) for all x in some open interval around b. It is strict when the inequality is > for every nearby x ≠ b.
- Check for a local minimum. The graph never changes from falling to rising, and the domain is all real numbers, so there are no endpoints to consider. h has no local minimum.A local minimum needs falling then rising, with domain on both sides of the point. There is no such place.
- Read the location from the horizontal axis, , and the value from the vertical axis, . The point is .The location is the input b, the value is the output h(b), and the point is (b, h(b)).
Work to write
- The graph rises up to x = −1 and falls after x = −1.
- h(x) = −(x + 1 + 3 ≤ 3 = h(−1) for all x, so h(−1) ≥ h(x) on an open interval around −1.
- h has a local maximum value of 3 at x = −1.
- The point is (−1, 3).
- h has no local minimum.
Rung 4 of 5
Proving a local minimum with the inequality on a restricted domain
A function is given by f(x) = (x − 1 − 4, defined only on the interval [−2, 3]. Points read from its graph are (−2, 5), (−1, 0), (0, −3), (1, −4), (2, −3) and (3, 0). The graph falls from x = −2 to x = 1 and rises from x = 1 to x = 3. Find every local maximum and local minimum of f. Justify each one with the defining inequality and say whether it is strict. For each, give the value, the location and the point.
Show the steps and the answer
- Scan the listed heights 5, 0, , 0. The graph falls from down to and then rises to (3, 0).Local extrema can only occur where the graph changes direction, or along flat stretches.
- The only change of direction is at , from falling to rising. Mark as a candidate local minimum. The graph has no change from rising to falling, so there is no interior candidate for a local maximum.Falling then rising signals a local minimum. Rising then falling would signal a local maximum.
- Apply the inequality at . . This is , so for every x in the open interval (0, 2), which lies inside .A local minimum at b requires f(b) ≤ f(x) for all x in some open interval around b that is contained in the domain.
- Check strictness. For , so f(1) < f(x) for every nearby . There is no flat stretch or equal nearby height.A strict local minimum needs < for every nearby x other than b. A square of a nonzero number is positive.
- Examine the ends and . No open interval around either end fits inside , because the domain stops on one side. So neither end is a local maximum or local minimum. The height is handled separately, as the absolute maximum.The local definition requires domain points on both sides of b. Ends are considered only for absolute extrema.
- Read the horizontal input as the location: 1. Read the vertical output as the value: .The location is b, the value is f(b), and the point is (b, f(b)).
Work to write
- Graph falls on [−2, 1] and rises on [1, 3]; the only turn is at x = 1.
- f(x) − f(1) = (x − 1 ≥ 0, so f(1) ≤ f(x) on (0, 2) ⊂ [−2, 3].
- (x − 1 > 0 for x ≠ 1, so the local minimum is strict.
- x = −2 and x = 3 are endpoints: no open interval in the domain on both sides, so they are not local extrema.
- Local minimum value −4 at x = 1; point (1, −4). No local maximum.
Rung 5 of 5
Checking a claimed peak against both neighbors
A graph of y = f(x) on the domain [-3, 3] is made of straight segments joining these points, read from the graph: (-3, 1), (-2, 4), (-1, 6), (0, 3), (1, -2), (2, 0), (3, 5). A student says f has a local maximum at x = -2 because f(-2) = 4 is higher than f(-3) = 1. Check this claim by comparing heights on both sides. Then find every local maximum and local minimum of f, giving the value and location of each in a sentence and the point as an ordered pair.
Show the steps and the answer
- Check the student's claim at on the left side. , and the segment from to rises.A local maximum needs f(-2) ≥ f(x) for all nearby x on both sides. The left side passes.
- Check the right side of . . Every x just to the right of lies on the rising segment toward , so f(x) > 4 there.One branch higher than f(-2) in every open interval around -2 breaks the condition f(-2) ≥ f(x). The claim fails, and x = -2 is not a local maximum.
- Scan the heights in order: 1, 4, 6, 3, , 0, 5. The graph rises to , falls to , then rises to .Local extrema in the interior sit where rising changes to falling or falling changes to rising.
- At , the left neighbor is and the right neighbor is . Both segments slope down away from , so f(x) < 6 for nearby .Rising then falling, checked on both branches, gives a strict local maximum.
- At , the left neighbor is and the right neighbor is . Both segments slope up away from , so for nearby .Falling then rising, checked on both branches, gives a strict local minimum.
- Exclude and .They are ends of the domain, so no open interval around them lies inside the domain. Ends are considered separately, for absolute extrema.
- Read each location from the horizontal input and each value from the vertical output.The location is b, the value is f(b), and the point is (b, f(b)).
Work to write
- Right of x = -2: f(-1) = 6 > 4, so x = -2 is not a local max
- f(-2) = 4 < 6 and f(0) = 3 < 6, so local max at x = -1
- Local maximum value 6 at x = -1, point (-1, 6)
- f(0) = 3 > -2 and f(2) = 0 > -2, so local min at x = 1
- Local minimum value -2 at x = 1, point (1, -2)
- x = -3 and x = 3 are domain ends, not local extrema
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- For a value, give the output and where it occurs. For a point, give (input, output).
- In this text, a domain endpoint without nearby domain points on both sides is not local. It can still be an absolute extremum.
- Graph exercises commonly emphasize isolated turns. If a flat stretch appears, state how the nonstrict rule treats it.
- Only the TI-30XIIS is allowed on this course's exam. Read the supplied graph; nearby substitutions support a suspected shape but cannot certify all turns.
7 The trap
Saying 'the maximum is x = 1'. The maximum is the output, 2; x = 1 is where it happens. On the exam write both: 'local maximum of 2 at x = 1'.
Lesson 10 of 10
Toolkit behavior, then absolute maximum and minimum
Open this lessonLeans on 0Comes back in 0
Leans on
No lesson links recorded.
Comes back in
No lesson links recorded.
1 In plain words
Think of a toolkit as the basic shapes you keep in a drawer. First, revisit the nine toolkit functions from section 1.1 and see where each graph rises, falls, or stays level. Then widen your view from one nearby hill to an entire mountain range. An absolute maximum is the greatest output the function actually reaches anywhere in its domain, the full set of accepted inputs. An absolute minimum is the least reached output. One value can occur at several inputs. Some graphs have no highest or lowest output. An included endpoint can supply the record height even when it is not a local turning point.
2 Picture it
Reminder
Reminder: Toolkit functions, Domain and endpoint notation, Squaring negatives
- Toolkit functions. The nine toolkit functions are the basic graphs introduced in section 1.1. Each part above gives its formula, domain, behavior, and example.
- Domain and endpoint notation. [−3, 2] includes both ends; [0, 2) includes 0 and excludes 2. A filled dot is included and a hollow dot is excluded.
- Squaring negatives. (−3 = 9, so 4 − (−3 = 4 − 9 = −5.
3 Why
Absolute compares with every accepted input, so you must inspect the whole domain and check whether the proposed height is reached. A continuing graph may have outputs without any upper or lower bound. It may also approach a bound without reaching it, as approaches 0 but stays positive. Neither case supplies a missing extremum. Finite domain endpoints deserve attention because their heights can exceed all interior heights. A highest or lowest included output remains the record even if it occurs at more than one input.
4 The rule
The absolute maximum is f(c) when c is in the domain and for every domain input x.
The absolute minimum is f(d) when d is in the domain and for every domain input x. The value must be attained, meaning reached at an accepted input.
The same idea, five ways
'absolute maximum of 4 at x = 0' or 'there is no absolute minimum.'
'The greatest output over the entire domain is 4, attained at input 0.'
- Absolute maximum: f(c) ≥ f(x) for every x in the domain, with c in the domain.
- Absolute minimum: f(d) ≤ f(x) for every x in the domain, with d in the domain.
- Maximum value: f(c).
- Maximum point: (c, f(c)).
The highest or lowest reached elevation in the entire mapped region.
The same idea, other ways
A local record compares nearby heights on both sides; an absolute record compares every height in the whole domain. An included endpoint can be absolute without being local under this text's two-sided definition. Flat ties can satisfy the nonstrict local definition without isolated turns.
Local: nearby on both sides
Absolute: every domain input
Value: output height
Location: input
For f(x) = 4 − , no output exceeds 4 because ≥ 0. The input 0 actually gives 4. These two facts together prove the absolute maximum. Large squares make outputs arbitrarily negative, so there is no absolute minimum.
If the domain is exactly the eight recorded years, the gas table has greatest output $3.68 at 2012 and least output $2.31 at 2005. Those are absolute extrema of this finite data function. The table alone cannot give absolute extrema of all unmeasured prices between those years.
For , x = 10 gives 0.01 and x = 100 gives 0.0001. Both are positive. Every allowed x gives a positive output, and doubling its size divides the output by 4. There is always a smaller output, but 0 is never reached, so there is no absolute minimum.
| Toolkit function | Increasing on | Decreasing on | Absolute max and min |
|---|---|---|---|
| Constant, f(x) = c | none | none (constant on (−∞, ∞)) | c is both |
| Identity, f(x) = x | none | neither | |
| Absolute value, f(x) = |x| | (0, ∞) | min 0 at x = 0; no max | |
| Quadratic, f(x) = | (0, ∞) | min 0 at x = 0; no max | |
| Cubic, f(x) = | none | neither | |
| Reciprocal, f(x) = | none | (−∞, 0) and (0, ∞), each piece separately | neither |
| Reciprocal squared, f(x) = | (0, ∞) | neither | |
| Square root, f(x) = | (0, ∞) | none | min 0 at x = 0; no max |
| Cube root, f(x) = | none | neither |
Part 1: Toolkit 1: constant function, f(x) = c
A constant function acts like a shelf at one fixed height. The letter c stands for a fixed number, such as 3, rather than an input you change. All inputs get that same output.
- Formula: f(x) = c.
- Domain: (−∞, ∞). Range: {c}.
- Increasing: none. Decreasing: none. Constant on (−∞, ∞).
- Under the formal nonstrict definition, c is both a local maximum and a local minimum at every input.
- There are no strict local extrema or isolated turning points.
- Absolute maximum and minimum: c, both attained at every input.
Worked example
A decreasing line with one excluded endpoint
Let f(x) = -x + 3 with domain -4 ≤ x < 2. On the graph, the left end at (-4, 5) is a filled dot, so x = -4 is included. The right end at (2, 2) is a hollow dot, so x = 2 is excluded. The graph is a straight line segment with slope - and no other pieces. Find the absolute maximum and the absolute minimum of f, if they exist. For each one, give the value and every input where it occurs.
Show the steps and the answer
- Identify the toolkit shape. is a linear function with slope and y-intercept 3.A line has no turning point, so its highest and lowest heights on a restricted domain can only occur at the ends of that domain.
- Read the whole stated domain, . The input is included because it has a filled dot. The input is excluded because it has a hollow dot. There are no arrows, so the graph stops at both ends.The domain decides which inputs are accepted. The edges of the viewing window do not set the domain. The stated inequality and the dots do.
- Check for unbounded behavior. The domain is a bounded interval and the line is continuous on it. So the outputs neither rise nor fall without bound.Unbounded outputs would rule out an extremum. Here that does not happen, so we compare the heights at the ends.
- Compute the end heights. . .These are the only candidates for extremes on a line segment.
- The slope is negative, so f decreases from left to right. For every accepted x with , we have .A decreasing function gives its greatest output at the leftmost input and smaller outputs further right.
- Maximum: the height 5 is reached at the included input , and for every domain input. No other input gives 5, because the line is strictly decreasing.An absolute maximum must be attained at an accepted input and be at least as large as every output.
- Minimum: the height 2 occurs only at , which is excluded. Every accepted input gives an output strictly greater than 2. For any reached height , an input slightly to the right of gives a smaller output.A height that is approached but never reached is not an absolute extremum. No reached output is the least, so there is no absolute minimum.
- Absolute maximum: 5
- Location: x = -4
- Absolute minimum: none (outputs approach 2 but never reach it, since x = 2 is excluded)
Work to write
- f(-4) = -(-4) + 3 = 5, and x = -4 is included (filled dot)
- f(2) = 2, but x = 2 is excluded (hollow dot), so 2 is not attained
- Slope - < 0, so f decreases on -4 ≤ x < 2
- Absolute maximum: 5
- Location: x = -4
- Absolute minimum: none
Part 2: Toolkit 2: identity function, f(x) = x
The identity function returns whatever number you give it, like a machine that sends your card back unchanged. A larger input is therefore always a larger output.
- Formula: f(x) = x.
- Domain and range: (−∞, ∞).
- Increasing on (−∞, ∞); decreasing and constant on no interval.
- No local maximum or minimum, and no absolute maximum or minimum.
Worked example
Read a graph with no records
For f(x) = x, give behavior and extrema.
Show the steps and the answer
- The output increases whenever the input increases.Output and input are the same number.
- There are no local turns or flat comparisons and no absolute record heights.Every input has a larger-output neighbor on one side and smaller-output neighbor on the other; the domain extends without bound.
- Increasing on (−∞, ∞).
- Decreasing: none.
- Constant: none.
- Local maximum: none.
- Local minimum: none.
- Absolute maximum: none.
- Absolute minimum: none.
Part 3: Toolkit 3: absolute value function, f(x) = |x|
Absolute value gives a number's distance from zero, so neither a leftward nor a rightward distance is negative. As you approach zero from the left, that distance shrinks; after passing zero toward the right, it grows.
- Formula: f(x) = |x|.
- Domain: (−∞, ∞). Range: [0, ∞).
- Decreasing on (−∞, 0); increasing on (0, ∞); constant on no interval.
- Local and absolute minimum: 0 at x = 0.
- No local maximum and no absolute maximum.
Worked example
Read the V shaped toolkit graph
For f(x) = |x|, give its behavior and absolute extrema.
Show the steps and the answer
- The outputs at , 0, and 2 are 3, 0, and 2.Absolute value is distance from zero.
- Report decreasing before 0 and increasing after 0.The picture falls toward its vertex, then rises.
- The absolute minimum is 0 at ; there is no maximum.Distances cannot be negative, zero is reached, and arbitrarily large inputs have arbitrarily large distances.
- Decreasing on (−∞, 0).
- Increasing on (0, ∞).
- Absolute minimum: 0 at x = 0.
- Absolute maximum: none.
Part 4: Toolkit 4: quadratic function, f(x) =
Squaring measures the area of a square made from a length's size. Both positive and negative inputs give nonnegative outputs. The graph is a parabola with vertex at (0, 0).
- Formula: f(x) = .
- Domain: (−∞, ∞). Range: [0, ∞).
- Decreasing on (−∞, 0); increasing on (0, ∞); constant on no interval.
- Local and absolute minimum: 0 at x = 0.
- No local maximum and no absolute maximum.
Worked example
Absolute extrema of a downward parabola on a half-open domain
Let f(x) = -(x - 2 + 5 with domain -1 < x ≤ 4. On the graph, the left end at (-1, -4) is a hollow dot, so x = -1 is excluded. The right end at (4, 1) is a filled dot, so x = 4 is included. The vertex is at (2, 5). Find the absolute maximum and the absolute minimum of f, if they exist, and state every input where each occurs.
Show the steps and the answer
- Identify the toolkit shape. is the squaring toolkit function reflected over the x-axis, shifted right 2 and up 5. It is a downward-opening parabola with vertex (2, 5).The squaring toolkit accepts every real input. Only the stated domain restricts this problem, so we know where the vertex is and which way the parabola opens.
- Read the whole stated domain: . The domain has no arrows and is bounded on both sides. The left endpoint is excluded (hollow dot). The right endpoint is included (filled dot).Absolute extrema are judged only over the domain. The edges of the viewing window are not the domain endpoints; the stated inequality is.
- Check for unbounded behavior. The domain is a bounded interval, and every output satisfies . Outputs do not rise without bound, and they do not fall without bound.Unbounded rising rules out an absolute maximum, and unbounded falling rules out an absolute minimum. Neither happens here, so we must check reached heights.
- Check the excluded endpoint. Compute . Since is not in the domain, the height is approached as x moves toward from the right but is never reached.A height that is approached but never attained cannot be an absolute extremum.
- Find the greatest reached output. For every x, , so . Equality holds only when , and is in the domain. So for every domain input, and no other input gives 5.The absolute maximum must be attained at an accepted input and must be at least every other output. The vertex meets both conditions.
- Look for the least reached output. The other candidate is the included endpoint: . But inputs near give outputs below 1. For example, and .Every candidate for the absolute minimum must be compared with all domain inputs, not just the endpoints and the vertex.
- Conclude about the minimum. Every reached output is greater than . For any reached value , an input closer to gives a smaller output. So no reached output is less than or equal to all others.The only possible floor, -4, is unattained. Without an attained least height, there is no absolute minimum.
- Absolute maximum: 5, occurring only at x = 2.
- Absolute minimum: none, because outputs approach -4 as x approaches the excluded endpoint x = -1, but -4 is never reached.
Work to write
- f is a downward parabola with vertex (2, 5); domain -1 < x ≤ 4
- f(-1) = -4, but x = -1 is excluded, so -4 is not attained
- (x - 2 ≥ 0 ⇒ f(x) ≤ 5, with equality only at x = 2
- Absolute maximum value: 5
- Location: x = 2
- f(4) = 1 is not least, since outputs near x = -1 are smaller
- No absolute minimum (the height -4 is approached, never reached)
Part 5: Toolkit 5: cubic function, f(x) =
A cubic returns an input multiplied by itself three times. Negative inputs give negative outputs, zero gives zero, and positive inputs give positive outputs. Moving right keeps raising the output even where the middle of the graph looks nearly level.
- Formula: f(x) = .
- Domain and range: (−∞, ∞).
- Increasing on (−∞, ∞); decreasing and constant on no interval.
- No local maximum or minimum and no absolute maximum or minimum.
- The flattened appearance at 0 is not a turn or a constant interval.
Worked example
A wide, flat-looking parabola reaches its lowest height at exactly one input
Let f(x) = (x + 1 + 2 with domain -4 < x ≤ 5. The graph is a wide upward-opening parabola with vertex (-1, 2). Near the vertex the curve looks almost flat: f(-2) = 2.25 and f(0) = 2.25. The left end at (-4, 4.25) is a hollow dot, so x = -4 is excluded. The right end at (5, 11) is a filled dot, so x = 5 is included. Find the absolute maximum and the absolute minimum of f, if they exist, and give every input where each one occurs.
Show the steps and the answer
- Identify the toolkit shape: f is the squaring function , shifted 1 left and 2 up, and vertically compressed by a factor of . It opens upward with vertex .The form a(x - h + k with a = > 0, h = -1, k = 2 gives an upward parabola whose vertex is (h, k).
- Read the whole domain . It is a bounded interval. The left end is excluded (hollow dot). The right end is included (filled dot). Nothing continues past either end.Only accepted inputs can produce an extreme value, so the endpoint dots must be checked first.
- Check for unbounded behavior. The domain is bounded, so the outputs cannot rise or fall without bound. Both extrema may exist.An extremum fails to exist by unboundedness only when the outputs grow or drop without limit on the domain.
- Find the lowest height. The vertex input lies in the domain, and . Solve : , so is the only solution. The nearby values and are close to 2 but larger.The flat look near the vertex is misleading. The squared term is positive for every x ≠ -1, so the height 2 is reached at one input only.
- Find the highest height. f increases as x moves away from . To the left, the farthest input is near , where , but is excluded. To the right, , and is included.The hollow dot at height 4.25 is not attained, but it is lower than 11 anyway. The included right end gives the greatest output.
- Compare the reached heights across the whole domain. Every output satisfies . The value 2 occurs only at . The value 11 occurs only at , because the only other solution of is , which lies outside the domain.An absolute extremum is a reached output that is at least as large (or at least as small) as every other output, together with all inputs that produce it.
- Absolute maximum: 11
- Occurs at x = 5
- Absolute minimum: 2
- Occurs at x = -1 (only)
Work to write
- Vertex (-1, 2) is in the domain; f(-1) = 2
- (x + 1 = 0 only when x = -1, so the minimum is reached once
- f(-4) = 4.25 is not attained (hollow dot)
- f(5) = 11 is attained (filled dot)
- Absolute maximum: 11 at x = 5
- Absolute minimum: 2 at x = -1
Part 6: Toolkit 6: reciprocal function, f(x) =
The reciprocal is one divided by the input. You cannot feed in zero, so the graph has separate branches on the two sides of zero. Each branch falls when you read it toward the right.
- Formula: f(x) = .
- Domain and range: (−∞, 0) ∪ (0, ∞).
- Decreasing on (−∞, 0) and on (0, ∞), separately; increasing and constant on no interval.
- No local maximum or minimum and no absolute maximum or minimum.
- It is not decreasing across the entire disconnected domain: f(−1) = −1 < 1 = f(1).
Worked example
Decrease separately on both sides
Read behavior and extrema of f(x) = .
Show the steps and the answer
- The negative branch moves from to .These input moves stay on one side of the excluded zero.
- The positive branch moves from to .The larger positive denominator gives a smaller positive fraction.
- Report two decreasing intervals and no extrema.Each branch strictly falls, and outputs are unbounded above and below near the missing input.
- Decreasing on (−∞, 0) and on (0, ∞), each separately.
- Increasing: none.
- Constant: none.
- Local maximum: none.
- Local minimum: none.
- Absolute maximum: none.
- Absolute minimum: none.
Part 7: Toolkit 7: reciprocal squared, f(x) =
First square the input, then divide one by that square. Every allowed output is positive. Farther from zero gives a larger denominator and a smaller output. Closer to zero gives a smaller denominator and a larger output.
- Formula: f(x) = .
- Domain: (−∞, 0) ∪ (0, ∞). Range: (0, ∞).
- Increasing on (−∞, 0); decreasing on (0, ∞); constant on no interval.
- No local maximum or minimum.
- No absolute minimum: outputs approach 0 without reaching it. No absolute maximum: outputs grow without bound near excluded input 0.
Worked example
A reciprocal curve that sinks toward 0 but never gets there
Let f(x) = with domain x ≥ 1. The left end at (1, 6) is a filled dot, so x = 1 is included. The domain continues to the right without end. A graphing window happens to stop at x = 12, but that is only where the picture is cut off. A table of values gives: f(1) = 6, f(2) = 3, f(3) = 2, f(6) = 1, f(12) = . Find the absolute maximum and the absolute minimum of f, if they exist, and give every input where each occurs.
Show the steps and the answer
- Identify the toolkit shape: is the reciprocal function stretched vertically by 6. On x > 0 it is decreasing, and as x grows its outputs approach 0 from above.Knowing the toolkit behavior tells us how the graph acts beyond the plotted points. The reciprocal has the horizontal asymptote y = 0.
- Read the whole stated domain: . It has an included left endpoint at and no right endpoint. The window edge at is not a domain endpoint.Extrema are judged over every accepted input, not only the visible part of the graph.
- Check for unbounded behavior. On the outputs never rise above 6 and never fall below 0, so they are bounded in both directions.An absolute maximum is ruled out automatically only when the outputs rise without bound. An absolute minimum is ruled out automatically only when they fall without bound.
- Test the low level 0. Solving has no solution, because a fraction with numerator 6 is never 0. For any input a, the larger input 2a gives , which is less than f(a). So no reached output is the least.A height that is approached but never attained is not an absolute minimum. Since every reached height has a lower one beyond it, there is no absolute minimum.
- Find the greatest reached output. f is decreasing on the domain, so the largest output occurs at the smallest accepted input, . That output is . Every other input x > 1 gives , so is the only location.The value 6 is attained at the included endpoint, and f(1) ≥ f(x) for every x ≥ 1.
- Absolute maximum: 6, at x = 1 only.
- Absolute minimum: none. The outputs approach 0 but never reach it.
Work to write
- Domain x ≥ 1 continues right; the window edge at x = 12 is not an endpoint
- f is decreasing on x ≥ 1 and approaches 0
- = 0 has no solution, so 0 is not attained
- Absolute maximum: 6
- Location of maximum: x = 1
- Absolute minimum: none
Part 8: Toolkit 8: square root function, f(x) =
A square root asks which nonnegative number squares to the input. For example, = 2 because = 4. Real inputs must be nonnegative. The graph starts at the included input zero and rises toward the right.
- Formula: f(x) = .
- Domain and range: [0, ∞).
- This function increases throughout its domain; the course reports the open increasing interval (0, ∞).
- Decreasing and constant on no interval.
- Absolute minimum: 0 at x = 0. No absolute maximum.
- The included endpoint 0 is not a local minimum under this text's two-sided-neighborhood definition.
Worked example
An endpoint can be an absolute minimum
For f(x) = , give the domain, the course's increasing interval, and extrema.
Show the steps and the answer
- Accept inputs , including 0.A real square cannot be negative and = 0.
- Read the rising graph and report increasing on .The course uses open behavior intervals, while the actual function also increases when comparing 0 with a larger input.
- The absolute minimum is 0 at ; there is no absolute maximum or local extremum.All outputs are nonnegative, 0 is reached, the curve continues upward without bound, and its endpoint has no domain neighborhood on both sides.
- Domain: [0, ∞).
- Increasing interval reported in this course: (0, ∞).
- Absolute minimum: 0 at x = 0.
- Absolute maximum: none.
- Local maximum: none.
- Local minimum: none.
Part 9: Toolkit 9: cube root function, f(x) =
A cube root reverses cubing. It asks what real number multiplied by itself three times makes the input. Negative inputs work: ∛(−8) = −2 because (−2 = −8. Larger inputs give larger cube roots.
- Formula: f(x) = .
- Domain and range: (−∞, ∞).
- Increasing on (−∞, ∞); decreasing and constant on no interval.
- No local maximum or minimum and no absolute maximum or minimum.
Worked example
Negative cube roots are accepted
Read behavior and extrema of f(x) = .
Show the steps and the answer
- , and .(−2 = −8, = 0, and = 27.
- Report increasing on , with no extrema.The curve keeps rising with no turn, level interval, or upper or lower output bound.
- Increasing on (−∞, ∞).
- Decreasing: none.
- Constant: none.
- Local maximum: none.
- Local minimum: none.
- Absolute maximum: none.
- Absolute minimum: none.
Part 10: Read the retained toolkit summary
A summary table is like a directory: it helps you retrieve a result after you have understood the separate graphs. These drawn columns repeat the original nine-function summary. Return to each function’s part if you need its reason.
- The drawn tables retain the original increasing, decreasing, and absolute-extremum summary for all nine functions.
- Read reciprocal decreasing intervals separately, since input 0 is excluded.
- Constant c is both absolute values at every input, with no strict rising or falling interval.
Worked example
Reflected square root on a half-open domain: an endpoint minimum and an unreached top
Let f(x) = - + 6 with domain 2 < x ≤ 11. On the graph, the left end at (2, 6) is a hollow dot, so x = 2 is excluded. The right end at (11, 3) is a filled dot, so x = 11 is included. A table of values from the domain gives f(3) = 5, f(6) = 4 and f(11) = 3. Find the absolute maximum and the absolute minimum of f, if they exist. For each one that exists, give the value and every input where it occurs. If one does not exist, explain why.
Show the steps and the answer
- Identify the toolkit shape. The function is the square-root toolkit function shifted right 2, reflected across the horizontal axis, then shifted up 6. rises on x ≥ 0. The minus sign flips the graph vertically, so f falls steadily as x increases. A function that always falls has no turning point in the middle of its domain.
- Read the whole stated domain: . The left end is excluded (hollow dot at (2, 6)). The right end is included (filled dot at (11, 3)). There are no arrows, so the graph does not continue past either end.An extremum must be attained at an input that is in the domain. Included and excluded ends must be noted before any heights are compared.
- Check for unbounded behavior. On , the value lies between 0 and 3. So f(x) lies between and .The outputs are trapped between 3 and 6. They neither rise nor fall without bound, so unboundedness does not rule out either extremum.
- Test the top level, 6. As x moves toward 2 from the right, f(x) approaches 6. Reaching 6 would need , which means , and is excluded. For every x in the domain, , so f(x) < 6. Any accepted input x has a slightly smaller accepted input that gives a larger output.A height that is approached but never reached is not an absolute maximum. The hollow dot at (2, 6) marks an unattained level, and no reached output is the largest. So there is no absolute maximum.
- Test the bottom level, 3. At , and is in the domain. For every x in the domain, , so . Equality needs , which happens only at .The value 3 is reached at an accepted input, and no domain input gives a lower output. That makes 3 the absolute minimum, and x = 11 is the only input that produces it.
- Compare with the table: . These outputs fall as x grows, all are at least 3, and all are below 6.Reached heights at sample inputs agree with the analysis: a falling shape with its lowest point at the included right end.
- Absolute maximum: none. The outputs approach 6 as x approaches 2, but x = 2 is excluded, so 6 is never reached.
- Absolute minimum: 3, at x = 11.
Work to write
- f(x) = - + 6 is decreasing on 2 < x ≤ 11
- x = 2 is excluded (hollow dot), x = 11 is included (filled dot)
- f(x) → 6 as x → 2⁺, but f(x) < 6 for every domain input
- Absolute maximum: none (6 is approached but not attained)
- Absolute minimum: 3
- Occurs at x = 11
Part 11: Included endpoints can hold absolute records
The endpoint is the end of the accepted input stretch, like the end of a road. A filled dot means the point belongs to the graph. It can be the highest or lowest point even when there is no nearby road on one side.
- Check included endpoints when comparing all domain outputs.
- This text's local definition needs an open domain neighborhood on both sides.
- The domain restriction can change absolute extrema even when the formula stays the same.
Worked example
Absolute extrema of f(x) = -(x + 2 + 7 on a closed interval
Let f(x) = -(x + 2 + 7 with domain -5 ≤ x ≤ 0. The graph is a downward-opening parabola with vertex (-2, 7). The left end at (-5, -2) is a filled dot, so x = -5 is included. The right end at (0, 3) is a filled dot, so x = 0 is included. Find the absolute maximum and the absolute minimum of f, and state where each occurs.
Show the steps and the answer
- Identify the toolkit shape. is the squaring function reflected over the x-axis, shifted 2 left and 7 up. It is a downward-opening parabola with vertex .The squaring toolkit function accepts every real input. Here the stated domain -5 ≤ x ≤ 0 is the only restriction.
- Read the whole domain: , with filled dots at both ends and no arrows.Filled dots mean x = -5 and x = 0 are accepted inputs. The graph stops there, so the outputs cannot rise or fall without bound.
- Check for heights that are approached but never reached. Both endpoints are included and the curve is unbroken between them, so there are no hollow dots or unattained levels.Only heights reached at accepted inputs can be absolute extrema.
- Find the greatest output. Since for every x. The value 7 is reached when , which gives , and .The vertex is the highest point of a downward parabola, and here it lies inside the domain.
- Find the least output. Evaluate both endpoints: and . Compare them: .A downward parabola decreases as you move away from the vertex. The lowest point on a closed interval is therefore at the endpoint farther from the vertex. That endpoint is x = -5, which is 3 units from x = -2, while x = 0 is only 2 units away.
- Confirm that is the least reached output and find every input that gives it. On the domain, , so and . Equality needs , so or . Only is in the domain.The location must list every accepted input that produces the extreme value.
- Absolute maximum: 7, at x = -2.
- Absolute minimum: -2, at x = -5.
Work to write
- Domain -5 ≤ x ≤ 0, both endpoints included (filled dots)
- Vertex (-2, 7) is in the domain, and f(x) ≤ 7 for all x
- f(-5) = -2 and f(0) = 3
- Absolute maximum: 7
- Occurs at x = -2
- Absolute minimum: -2
- Occurs at x = -5
Part 12: Hollow endpoints and unattained heights
A hollow dot is like a closed entrance: you can approach that address, but it is not accepted. The height at that excluded point cannot count as a reached record. A bound alone is not enough; an absolute extremum must happen.
- A hollow dot is excluded from the graph.
- A limiting height reached only at an excluded input cannot supply an absolute extremum.
- A bounded function can still have no absolute maximum or minimum if the relevant bound is unattained.
Worked example
A graph stops before its apparent highest height
For f(x) = x on domain [0, 2), find the absolute maximum and minimum.
Show the steps and the answer
- and every accepted output is at least 0.Every accepted input is nonnegative, and the output equals the input.
- No accepted input produces output 2.The right endpoint is excluded.
- For any accepted input b, the input is still below 2 and is greater than b.It is halfway from b toward 2, so it gives a larger accepted output.
- There is no absolute maximum; the absolute minimum is 0 at 0.Every candidate high output is beaten, while the lower bound 0 is reached.
- Absolute maximum: none.
- Absolute minimum: 0 at x = 0.
Part 13: Explain local versus absolute in words
A nearby record and an overall record answer different questions. Think of the tallest tree near your house compared with the tallest tree in the entire forest. Either comparison can tie, and either kind of record can fail to exist.
- Local compares nearby domain points on both sides; absolute compares every domain point.
- A local extremum can be an isolated turn or a nonstrict flat comparison.
- An absolute extremum can occur at an included endpoint.
- Both values can occur at more than one input, or fail to exist.
Worked example
A turn without an overall record
The given full curve f(x) = − 12x rises to (−2, 16), falls to (2, −16), then rises again. Its left end continues downward without bound and its right end upward without bound. Explain its local and absolute extrema.
Show the steps and the answer
- There is local maximum 16 at and local minimum at 2.The stated direction changes make the nearby two-sided comparisons hold.
- There is no absolute maximum or minimum.The given end behavior beats every upper or lower candidate bound.
- State that local describes a neighborhood while absolute describes the whole domain.The turning values win their nearby comparisons but lose the whole-domain comparison.
- Local maximum: 16 at x = −2.
- Local minimum: −16 at x = 2.
- Absolute maximum: none.
- Absolute minimum: none.
Part 14: Absolute records of a finite data function
A table can be a complete function when its domain is exactly the listed inputs, like a list of measured prices on eight specific dates. Then you compare every listed output to find the highest and lowest recorded values.
- For domain exactly {2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012}, the table is the full finite function.
- Absolute maximum: $3.68 at 2012. Absolute minimum: $2.31 at 2005.
- A sampled peak or dip relative to adjacent years does not establish a continuous local extremum.
- The finite table has no open domain neighborhood around a listed year, so this text's two-sided interval definition is not being applied to the sampled peak language.
Worked example
Use all recorded columns
Let the gas-price function's domain be exactly the eight recorded years in the picture. Find its absolute maximum and minimum and describe the adjacent-year peak and dip honestly.
Show the steps and the answer
- Scan every output column; 3.68 is greatest and 2.31 is least.All domain outputs appear in this finite table.
- The column under 2012 gives 3.68 and the column under 2005 gives 2.31.These are the input locations of the record outputs.
- The 2008 output 3.30 exceeds its adjacent recorded outputs 2.84 and 2.41; the 2009 output 2.41 is below adjacent 3.30 and 2.84.Those column comparisons describe an observed sampled peak and dip, rather than continuous behavior at unrecorded times.
- Absolute maximum of the finite data function: $3.68 at 2012.
- Absolute minimum of the finite data function: $2.31 at 2005.
- Sampled adjacent-year peak: $3.30 in 2008.
- Sampled adjacent-year dip: $2.41 in 2009.
- Unrecorded prices and their extrema: undetermined.
5 How
- Review the nine toolkit shapes and their domain restrictions before using the summary table.
- Look at the whole stated domain, including included endpoint dots and any arrows or stated continuation.
- If outputs rise without bound, there is no absolute maximum; if they fall without bound, there is no absolute minimum.
- A height approached but never reached is not an absolute extremum. Check excluded hollow dots and unattained levels.
- Compare the remaining reached heights with every domain piece. Find the greatest and least reached outputs and every input producing each.
- Answer with the value and location on separate lines. A viewing-window edge does not establish a domain endpoint.
Check the whole domain and attainment
- Identify the exact domain and its included or excluded endpoints.
- Check every branch for outputs without an upper or lower bound.
- Check whether a proposed record height is actually reached.
- Compare all reached candidate heights, including included endpoints.
- List every input that reaches each absolute value.
6 Worked example
Worked example
Showing that a highest point exists
Find the absolute maximum and absolute minimum of f(x) = 4 − on its whole real-number domain, if they exist.
Show the steps and the answer
- for every real input x.Positive and negative numbers have positive squares, and = 0.
- Thus for every input.Subtracting a nonnegative number leaves 4 or less.
- .Input 0 is accepted and is the only input making the square zero.
- The absolute maximum is 4 at .No output is greater and this value is attained.
- and ,996; larger input sizes make the output fall without bound. grows without bound and is subtracted from 4.
- There is no absolute minimum.Every candidate low height is eventually beaten by subtracting a still larger square.
- Absolute maximum: 4 at x = 0.
- Absolute minimum: none.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 6
Absolute extrema of a restricted parabola with an open endpoint
The function f(x) = -(x - 1 + 4 is defined only on the domain -1 ≤ x < 4. Its graph is a downward-opening parabola with vertex (1, 4). There is a closed (filled) dot at (-1, 0) and an open (hollow) dot at (4, -5). Find the absolute maximum and the absolute minimum of f, if they exist. For each one that exists, give the value and every input where it occurs.
Show the steps and the answer
- Identify the toolkit shape: f is the square function reflected across the x-axis, shifted 1 right and 4 up. It opens downward with vertex (1, 4).Knowing the toolkit shape tells us the graph rises up to the vertex and falls on both sides of it.
- Read the whole stated domain: . The left endpoint is included (closed dot). The right endpoint is excluded (hollow dot). There are no arrows, so the graph does not continue past either end.Absolute extrema are judged only over the accepted inputs, so we must know exactly which endpoints count.
- Check for unbounded behavior. The domain is a bounded interval and the graph stops at both ends, so the outputs neither rise nor fall without bound.Unbounded outputs would rule out an extremum, but that does not happen here.
- Check the hollow dot. As x approaches 4 from the left, f(x) approaches . But is not in the domain, so the height is never reached. For example, , which is still above .A height that is approached but never attained cannot be an absolute extremum.
- Compare the reached heights. For , the quantity lies in , so lies in [0, 9). That makes f(x) lie in . The greatest reached output is 4, at only. The closed endpoint gives , which is less than 4. No least reached output exists, because the outputs get arbitrarily close to without ever reaching it.The absolute maximum is the greatest attained output. The absolute minimum would have to be a least attained output, and the set (-5, 4] has no least element.
- State the results with value and location on separate lines.The lesson asks for the value and the location to be reported separately.
- Absolute maximum value: 4
- Location: x = 1
- Absolute minimum: none (the outputs approach -5 but never reach it, because x = 4 is excluded)
Work to write
- Domain: -1 ≤ x < 4; x = 4 excluded (hollow dot)
- Vertex (1, 4) is the highest reached point
- Absolute maximum value: 4
- Location: x = 1
- f(x) → -5 as x → 4⁻, but f never equals -5
- No absolute minimum
Rung 2 of 6
Showing that a highest point exists
Find the absolute maximum and absolute minimum of f(x) = 4 − on its whole real-number domain, if they exist.
Show the steps and the answer
- for every real input x.Positive and negative numbers have positive squares, and = 0.
- Thus for every input.Subtracting a nonnegative number leaves 4 or less.
- .Input 0 is accepted and is the only input making the square zero.
- The absolute maximum is 4 at .No output is greater and this value is attained.
- and ,996; larger input sizes make the output fall without bound. grows without bound and is subtracted from 4.
- There is no absolute minimum.Every candidate low height is eventually beaten by subtracting a still larger square.
- Absolute maximum: 4 at x = 0.
- Absolute minimum: none.
Rung 3 of 6
Absolute extrema of a parabola on a closed interval with a tied maximum
The function f(x) = (x - 2 - 1 is defined only on the domain -1 ≤ x ≤ 5. Its graph is an upward-opening parabola with vertex (2, -1). Both ends are included. There is a closed (filled) dot at (-1, 8) and a closed (filled) dot at (5, 8). Find the absolute maximum and the absolute minimum of f, if they exist. Give each value and every input where it occurs.
Show the steps and the answer
- Identify the toolkit shape. is the squaring function shifted right 2 and down 1. It opens upward and its vertex is .The squaring toolkit function has a lowest point at its vertex and rises on both sides. A shift moves the vertex but does not change that behavior.
- Read the whole stated domain: . Both endpoints use , so and are accepted inputs. The graph has no arrows.The domain is fixed by the problem statement. It is not set by any viewing window. Included ends shown with filled dots are candidates for extrema.
- Check for unbounded behavior. The domain is a closed, bounded interval, so the outputs cannot rise or fall without bound.Unbounded outputs would rule out an extremum. Here the graph stops at two filled dots.
- Check for heights that are approached but never reached. There are no hollow dots, and every height on the curve from to is reached.Only attained values can be absolute extrema. With both ends closed, no endpoint height is excluded.
- List the candidates. The interior vertex is at , with . The left end is at , with . The right end is at , with .On a closed interval, an absolute extremum of this parabola can occur only at the vertex or at an included endpoint.
- Compare the reached heights: , 8 and 8. The greatest is 8, reached at both and . The least is , reached only at .The absolute maximum must be at least as large as every output, and the absolute minimum must be at most as small as every output. Every input that produces the extreme value must be reported.
- Absolute maximum: 8, at x = -1 and x = 5.
- Absolute minimum: -1, at x = 2.
Work to write
- f(2) = -1 (vertex, interior)
- f(-1) = 8 (included left end)
- f(5) = 8 (included right end)
- Absolute maximum: 8
- occurs at x = -1 and x = 5
- Absolute minimum: -1
- occurs at x = 2
Rung 4 of 6
A graph stops before its apparent highest height
For f(x) = x on domain [0, 2), find the absolute maximum and minimum.
Show the steps and the answer
- and every accepted output is at least 0.Every accepted input is nonnegative, and the output equals the input.
- No accepted input produces output 2.The right endpoint is excluded.
- For any accepted input b, the input is still below 2 and is greater than b.It is halfway from b toward 2, so it gives a larger accepted output.
- There is no absolute maximum; the absolute minimum is 0 at 0.Every candidate high output is beaten, while the lower bound 0 is reached.
- Absolute maximum: none.
- Absolute minimum: 0 at x = 0.
Rung 5 of 6
A turn without an overall record
The given full curve f(x) = − 12x rises to (−2, 16), falls to (2, −16), then rises again. Its left end continues downward without bound and its right end upward without bound. Explain its local and absolute extrema.
Show the steps and the answer
- There is local maximum 16 at and local minimum at 2.The stated direction changes make the nearby two-sided comparisons hold.
- There is no absolute maximum or minimum.The given end behavior beats every upper or lower candidate bound.
- State that local describes a neighborhood while absolute describes the whole domain.The turning values win their nearby comparisons but lose the whole-domain comparison.
- Local maximum: 16 at x = −2.
- Local minimum: −16 at x = 2.
- Absolute maximum: none.
- Absolute minimum: none.
Rung 6 of 6
Absolute maximum at two places
You are asked for the highest and lowest heights reached on the complete pictured domain [−2.5, 3], including both filled endpoint dots. The dots sample the original smooth curve f(x) = 16 − 1.04( − 4 on this restricted domain; it reproduces the extreme values in the textbook illustration. Read all inputs where each absolute extreme value occurs.
Show the steps and the answer
- Scan the pictured heights over the entire stated domain. The two tallest dots have height 16, at and .These are the tops of the pictured curve. Algebra checks the upper bound: ( − 4 ≥ 0, so subtracting 1.04 times that square can never produce an output above 16.
- It is reached at two inputs, and .Substitute x = −2 or x = 2: = 4 and ( − 4 = 0, so both outputs equal 16. No other input makes − 4 zero on this domain.
- The least y-value anywhere is , reached at .The curve is lowest at the included right endpoint. On [−2.5, 3], 0 ≤ ≤ 9, so −4 ≤ − 4 ≤ 5. Thus the distance of − 4 from 0 is at most 5, and its square is at most 25. Multiplying by positive 1.04 preserves that upper bound; subtracting from 16 gives f(x) ≥ 16 − 1.04 · 25 = −10. Finally f(3) = −10 reaches the bound.
- Absolute maximum: 16 at x = −2 and x = 2.
- Absolute minimum: −10 at x = 3.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Absolute here means over the whole domain; it does not mean the absolute value operation |x|.
- Write both the output record and every input where it is attained.
- A complete graph stops at its stated ends. Check its included end dots, but do not treat every picture-window edge as an endpoint.
- Bounded is not enough. Check whether the best height is reached.
- The toolkit summary's reciprocal intervals describe each branch separately.
7 The trap
Calling the highest point visible in a picture the absolute maximum when an arrow shows the graph keeps rising beyond the window. Check how the graph behaves at its ends before you name an absolute maximum or minimum.