Quarry School

Study sheet

What to know by heart, and what to rebuild from a memory hook.

Functions and function notation

Know

  • A function gives each input exactly one output.

    A function is a rule that takes an input and hands back exactly one output. Think of a vending machine: press B4 and you always get the same snack, never two different snacks. Two different buttons may give the same snack; that is allowed. What is not allowed is one button giving chips on Monday and a candy bar on Tuesday. The rule must be this strict because the whole point of a function is prediction: once you know the input, you know the output. If one input could lead to two outputs, writing f(3) would not name a single number, and everything built on it would break.

  • f(x) is read "f of x". It is not multiplication.

    In f(x), the letter f is the name of a rule, x is the input you hand it, and f(x) is the output that comes back. Read it as 'f of x', the way 'the price of coffee' names a price that depends on the coffee; nobody multiplies price by coffee. The parentheses are a slot for the input, so f(2) means 'the output of f when the input is 2'. Function notation exists because it packs three facts into one symbol: which rule, which input, and the result. Writing f(2) = 11 says all of that at once, while y = 11 hides the input.

  • Evaluate means put the given input in and compute the output. Solve means set the formula equal to the given output and find every x that works.

    Evaluate and solve are opposite trips through the same machine. To evaluate, you know the input and want the output: put the number in and compute, like checking what snack button C2 gives. To solve, you know the output and want the input, like asking which buttons give pretzels, so you set the formula equal to that output and work backward. Evaluating always gives exactly one answer, because a function has one output per input. Solving can give no answer, one answer, or several, because different inputs are allowed to share an output.

  • Vertical line test: is it a function. Horizontal line test: is it one-to-one.

    A graph shows every input and output pair as a point: the input is how far across, the output is how high. A vertical line marks one input, so if it hits the graph twice, that input has two outputs and the graph is not a function: that is the vertical line test. A horizontal line marks one output, so if it hits a function's graph twice, two inputs share that output and the function is not one-to-one: that is the horizontal line test. Think of a coat check: each ticket must match one coat, and in a one-to-one function each coat also matches only one ticket.

Rebuild

  • (a + h)2 = a2 + 2ah + h2. Multiply it out if you are unsure.

    (a + h)2 means (a + h) times (a + h), so every piece of the first factor multiplies every piece of the second: a · a, a · h, h · a and h · h. That gives a2 + ah + ah + h2 = a2 + 2ah + h2. Picture a square garden with side a + h: it splits into an a-by-a square, a small h-by-h square, and two a-by-h strips. The two strips are the 2ah that people forget. You do not need to memorize the result: write (a + h)(a + h) and multiply it out. The same steps give (a − h)2 = a2 − 2ah + h2.

  • The domain and range of the nine toolkit functions: read them off each graph instead of memorizing a table. Left-to-right spread is the domain; bottom-to-top spread is the range.

    You do not need to memorize eighteen answers if you can picture the nine toolkit functions. The domain is the graph's shadow on the x-axis: imagine a lamp shining straight down and see which x-values get covered. The range is its shadow on the y-axis, with the lamp shining from the side. The parabola y = x2 covers every x but only heights 0 and up, so its domain is (−∞, ∞) and its range is [0, ∞). This works because every point on a graph is an (input, output) pair, so the flattened shadows collect exactly the inputs and exactly the outputs.

Domain and range

Know

  • Two things break a domain: a zero denominator, and a negative under an even root.

    Start with every real number as a possible input, then cross out only what breaks the arithmetic. There are two ways to break it. Division by zero has no answer: 6 ÷ 0 would need a number that times 0 gives 6, and none exists. An even root of a negative has no real answer: −4 would need a real number whose square is −4, but every real square is 0 or more. Think of a bouncer who turns away only two kinds of guests. Everything else, such as polynomials, odd roots and absolute values, gets into the domain.

  • Bracket means included, parenthesis means not included. Infinity always takes a parenthesis.

    Interval notation names a stretch of the number line by its two ends. A square bracket, [ or ], says the end number belongs to the set; on a picture it is a closed dot. A round parenthesis, ( or ), says the set comes right up to that number but leaves it out; on a picture it is an open dot. Think of a sign reading 'ages 13 to 17 inclusive' versus 'under 18'. Infinity always takes a parenthesis because ∞ is not a number you can land on; it only says 'keep going', so there is no end point to include.

  • Dividing or multiplying an inequality by a negative flips the sign.

    An inequality is a comparison, like 'I am taller than you'. Adding or subtracting the same amount on both sides keeps it true, and so does multiplying or dividing by a positive number. Multiplying by a negative reflects both numbers across 0 on the number line, and a reflection reverses their order: 2 < 5, but −2 > −5, because −5 sits farther left. So the sign must flip to stay true. Think of a mirror: what was on the left ends up on the right. Domains need this constantly, because solving 4 − x ≥ 0 means dividing by −1.

Rebuild

  • The domain of a shifted toolkit function: the forbidden spot slides with the graph, so x−7 starts at 7 instead of 0.

    Many domain problems are a toolkit function that has been slid left or right, and the forbidden spot slides with it. x starts at x = 0, so x−7 starts where x − 7 = 0, at x = 7. 1x breaks at x = 0, so 1x+2 breaks where x + 2 = 0, at x = −2. Think of a 'no parking' sign painted on a trailer: pull the trailer 7 feet and the sign moves 7 feet with it. You can always rebuild the answer by setting the inside equal to the toolkit's breaking point and solving.

  • Domain and range from a graph: the shadow on the x-axis, the shadow on the y-axis.

    Imagine the graph as a bent wire with a lamp shining straight down onto the x-axis: the shadow it casts is the domain, every input the graph uses. Move the lamp to the side so it shines onto the y-axis: that shadow is the range, every output. A closed dot at an end means the end is in the shadow (bracket), an open dot means it is not (parenthesis), and an arrow means the shadow runs forever (∞). This works because each point is an (input, output) pair, so flattening the graph onto one axis collects only the inputs or only the outputs.

Rates of change and behavior of graphs

Know

  • Average rate of change = f(b)−f(a)b−a. It is a slope.

    The average rate of change tells you how much the output changed for each one unit of input, on average, between two inputs a and b: the change in output divided by the change in input. A trip of 150 miles in 3 hours averages 50 miles per hour, even if you sometimes stopped and sometimes sped. On a graph, the two inputs give two points, and the formula is exactly the slope of the straight line joining them, rise over run. That is why only the endpoints matter: the line ignores whatever the graph does in between.

  • The difference quotient: f(x+h)−f(x)h.

    The difference quotient is the average rate of change on a general interval: start at any input x and step h units to the right, to x + h. Put those two inputs into the slope formula. The top becomes f(x + h) − f(x), and the bottom becomes (x + h) − x = h. So it is not a new idea, only the old formula with letters for the endpoints. Picture standing on a hillside and taking a step of length h: the quotient measures your climb per unit of step. The answer is a formula in x and h, and h can never be 0.

  • Increasing and decreasing intervals are written in x-values.

    When a question asks where a function is increasing, it is asking 'for which inputs does the graph go uphill?' So the answer lists x-values, positions along the horizontal axis, never heights. Picture a hiking trail: you say 'the trail climbs from mile 2 to mile 5', not 'from 300 feet to 900 feet'. Read the graph left to right, mark the x-values of every peak and valley, and write the uphill and downhill stretches as open intervals. The ends take parentheses because at the exact top of a peak the graph is neither increasing nor decreasing.

Rebuild

  • The four moves of the difference quotient: plug in, subtract, simplify, cancel h.

    Every difference quotient uses the same four moves, like a dance routine. Plug in: write f(x + h) by replacing each x with (x + h). Subtract: write f(x + h) − f(x), with f(x) in parentheses so the minus sign reaches every term. Simplify: expand and combine; every term without an h must cancel. Cancel h: factor h out of the top and cancel it with the h on the bottom. You can rebuild the routine from the formula itself, because f(x+h)−f(x)h says it in order: build f(x + h), subtract f(x), divide by h.

  • Local maximum and minimum: where the graph turns around.

    A local maximum is a hilltop: the graph climbs, turns around, and goes down, so that point is higher than everything near it. A local minimum is a valley floor: the graph falls, turns, and climbs. 'Local' means you compare only with nearby points, like the tallest person in one room rather than in the whole city. You rebuild the idea from the turn: where rising switches to falling there is a maximum, and where falling switches to rising there is a minimum. Report two things: the value is the y-coordinate, and it occurs at the x-coordinate.

Composition of functions

Know

  • (f ∘ g)(x) = f(g(x)). The inside function goes first.

    Composition chains two functions: the output of one becomes the input of the next. In f(g(x)) you first feed x to g, then feed g's answer to f. Think of an assembly line: dough goes into the oven (g), and the baked loaf goes into the slicer (f). The small circle in f ∘ g names that whole chain, a composite function. The inside one, the inner function, goes first because of the parentheses: in (2 + 3) × 4 you work inside first, and in the same way f(g(x)) cannot start until g(x) is known.

  • The little circle is not multiplication.

    The symbol ∘ in f ∘ g means 'feed one into the other', not 'multiply'. Multiplying two functions is written with a dot or side by side: (fg)(x) = f(x) · g(x). Mixing them up is like confusing 'put the letter in the envelope' with 'put the letter next to the envelope': the same two things, very different results. Composition is a chain, so the second function acts on the first one's output; multiplication runs both functions separately on x and then multiplies the two answers.

  • Find the domain from the original formula, before you cancel or simplify anything.

    Simplifying can erase a warning sign. x2−9x−3 simplifies to x + 3, and x + 3 accepts every number, but the original fraction breaks at x = 3 because its bottom is 0 there. The function is defined by the original rule, so an input that was forbidden stays forbidden after the factor causing it cancels. It is like a store sign that says 'closed Mondays': repainting the store does not open it on Mondays. So write the domain first, then simplify, and carry the restriction along with the simpler formula.

Rebuild

  • The domain of f(g(x)): remove the x-values g cannot accept, then remove the x-values whose output g(x) is something f cannot accept.

    A composition is a security line with two gates. Gate one is the inner function g: an input x must be allowed into g, or the chain never starts. Gate two is the outer function f: whatever comes out of g must be allowed into f. The domain of f(g(x)) is every x that passes both gates. To rebuild the steps, list what g refuses; then find what f refuses and solve for the x-values whose g(x) lands on it, because those are turned away at gate two. Remove both sets.

  • Decomposing: find the inside piece and the outside operation.

    Decomposition is composition run backward: given one function h, you split it into an inside part g and an outside part f so that h(x) = f(g(x)). Ask 'what would I compute first on a calculator?' That first chunk is the inside, g(x). Whatever is done to that chunk afterward is the outside, f. It is like unpacking a recipe: the last step performed is the outer function. There is usually more than one correct decomposition, and any pair that recomposes to the original is right, which is also how you check your answer.

Transformation of functions

Know

  • Outside the function changes the height and does what it says.

    Outside means anything done to the answer after f has done its work, such as adding k in f(x) + k or multiplying by a in a·f(x). Think of f as a machine that prints a height for each x. An outside change edits the printout: +3 raises every printed height by 3, ×2 doubles it, and a minus sign turns every height into its opposite. The input x is never touched, so each point (x, y) keeps its x and moves only up or down, to (x, y + k) or (x, a·y). That is why an outside number means what it looks like: + is up and − is down.

  • Inside the function changes left and right and does the opposite.

    Inside means anything done to x before f sees it, as in f(x − 3), f(2x) or f(−x). Picture starting a recorded show 3 minutes late: at minute 3 on your clock you see what the show had at minute 0. What you watch is show(t − 3), and every scene appears 3 minutes later, even though the formula says minus. Graphs work the same way. In g(x) = f(x − 3), the height f had at 0 now appears where x − 3 = 0, at x = 3, so the whole graph moves right 3. For the same reason f(2x) reaches each old input twice as fast, which squeezes the graph to half its width.

  • Even: f(−x) = f(x). Odd: f(−x) = −f(x).

    These two equations describe two kinds of symmetry. An even function gives the same output for opposite inputs, as in f(−2) = f(2). Picture a face with a mirror down the middle: the left half matches the right half. Its graph is symmetric about the y-axis. An odd function gives opposite outputs for opposite inputs, as in f(−2) = −f(2). Picture a playing card that looks the same upside down: the graph is symmetric about the origin, because each point (x, y) comes with its partner (−x, −y). Most functions are neither even nor odd.

Rebuild

  • Where a point (x, y) goes on y = a·f(b(x − h)) + k: divide x by b, then add h; multiply y by a, then add k.

    This rule follows one dot through every change at once. Think of two conveyor belts. The horizontal belt runs backwards: it undoes what is written inside, so x is divided by b and then h is added. The vertical belt runs forwards: y is multiplied by a and then k is added, exactly as written. Why backwards inside: at the new spot X, g must feed f the old input x, so b(X − h) = x. Solving that for X means dividing by b and then adding h, which gives X = xb + h. If you forget the rule, solve b(X − h) = x again.

  • Even, odd or neither: write f(−x) and compare.

    This is a routine you can run on any formula. Replace every x with (−x), simplify, and set the result next to f(x) and next to −f(x). It is like checking whether a word is a palindrome: you write it backwards and compare letter by letter. Why it works: f(−x) is the height at the mirror-image input. If it always equals f(x), every point has a twin across the y-axis, so the function is even. If it always equals −f(x), the twin is also flipped upside down, so the function is odd. If it matches neither, there is no such symmetry.

Absolute value functions

Know

  • |A| = B (B positive) gives two equations: A = B and A = −B.

    |A| is the distance from A to 0 on the number line. If that distance is B, then A sits B steps to the right of 0 or B steps to the left. It is like hearing that a coffee shop is 3 blocks from the station on a straight street: it could be 3 blocks east or 3 blocks west, so there are two places to check. Both B and −B are B units from 0, and no other number is. So whatever sits inside the bars must equal B or −B, which gives two ordinary equations to solve.

  • In an absolute value inequality, less than means between and greater than means outside.

    |x − c| is the distance from x to c. Less than r means closer than r, so x is trapped in the one stretch between c − r and c + r. Greater than r means farther than r, so x is out past either end, in two separate pieces. Picture a dog on a 3-foot leash tied to a post. Every spot the dog can reach is within 3 feet of the post: one piece around it. The spots it cannot reach are more than 3 feet away, on both sides. A small distance means between; a large distance means outside.

  • Get the absolute value alone on one side before you split into two cases.

    The two-case rule works only on the bare form |A| = B. Anything added to the bars or multiplying them must be undone first, the way you unwrap a gift before you open the box inside it. The reason: the rule says the distance equals B, and that is true only of the bars by themselves. In 2|x| + 1 = 9 the distance is not 9. Subtract 1 and divide by 2, and the distance is 4. Splitting early splits the wrong number and gives answers that fail the check.

  • An absolute value can never equal a negative number.

    An absolute value is a distance, and a distance is zero or positive. You can be 0 miles from home or 5 miles from home, never −2 miles, the same way a car's odometer never shows a negative number. The bars remove the sign of whatever is inside, so the smallest |A| can ever be is 0, reached when A = 0. So once the bars are alone and the other side is negative, the equation has no solution, and you can stop. The same fact settles inequalities: |A| < −2 is never true, and |A| > −2 is always true.

Rebuild

  • The graph of a|x − h| + k: a V with its corner at (h, k).

    Start from y = |x|, a V with its corner point at the origin and arms of slope 1 and −1. The h slides the V right h (inside, so it acts backwards), the k lifts it k (outside, as written), a makes the arms steeper with slopes a and −a, and a negative a turns the V upside down. Think of a V-shaped coat hanger that you slide, lift, stretch and flip. The corner is at (h, k) because |x − h| is smallest, 0, when x = h, and then y = a·0 + k = k. To rebuild the graph, find where the inside is 0, plug that in, then use a for the arms.

Inverse functions

Know

  • What an inverse function does: if f(a) = b, then f−1(b) = a. It takes each output back to the input it came from.

  • The −1 in f−1 is part of the name, not a power: f−1(x) does not mean 1f(x).

  • A function has an inverse function exactly when it is a one-to-one function: different inputs always give different outputs.

  • The horizontal line test: a function is a one-to-one function exactly when no horizontal line meets its graph at more than one point.

  • The swap and solve method for a formula: write y = f(x), swap x and y, solve for y, and name the result f−1(x).

Rebuild

  • The check that two functions are inverses. Do not memorize it as a formula. Rebuild it from the round trip: f(g(x)) = x and g(f(x)) = x must both be true, because undoing has to work from either end.

  • Domain and range trade places: the domain of f−1 is the range of f, and the range of f−1 is the domain of f. Do not memorize which goes where. Rebuild it from the coat check: the backward counter takes in tickets and hands out coats.

  • The inverse from a table: trade the two rows. This is f(a) = b turning into f−1(b) = a, one column at a time.

  • The inverse from a graph: the point (a, b) on f becomes the point (b, a) on f−1, and trading the numbers in every point flips the graph across the line y = x. Rebuild it from one point: (1, 5) becomes (5, 1).

  • Why a restricted domain is needed: f(x) = x2 gives 9 for both 3 and −3, so it fails the horizontal line test. Keep only x ≥ 0 and every output comes from one input.

  • Which sign to keep when solving gives ±: the outputs of f−1 are the inputs of f, so the domain of f picks the sign. There is no need to memorize a sign rule.

  • Undoing a formula in your head: opposite moves in the opposite order. f(x) = 2x + 3 doubles and then adds 3, so its inverse subtracts 3 and then halves: f−1(x) = x−32.

Linear functions

Know

  • Slope: m = y₂−y₁x₂−x₁.

    Slope measures steepness as a rate: how much y changes for each 1 step in x. Think of a staircase. The rise is how far up each step goes, the run is how far forward, and the steepness is rise divided by run. Between two points, the rise is the change in y, y₂ − y₁, and the run is the change in x, x₂ − x₁. Dividing gives the change for one unit of x. Any two points on the same line give the same slope, because a line never changes its steepness.

  • y = mx + b: m is the slope, b is the value at x = 0.

    In slope-intercept form, the number attached to x is the slope and the number added on is the y-intercept. Think of a taxi fare: b is what the meter shows the moment you get in, at 0 miles, and m is the charge added for every mile. Why b is the starting value: put x = 0 in, and y = m·0 + b = b, so the line crosses the y-axis at (0, b). Why m is the slope: each time x grows by 1, mx grows by m while b stays put, so y grows by m.

  • Point-slope form: y − y₁ = m(x − x₁).

    Point-slope form writes a line from one point (x₁, y₁) and the slope m. It is like giving directions: start at the fountain, then for every step east go m steps north. It comes straight from the slope formula. Any other point (x, y) on the line satisfies y−y₁x−x₁ = m, and multiplying both sides by (x − x₁) gives y − y₁ = m(x − x₁). The minus signs belong to the form; when a coordinate of the point is negative, they turn into plus signs.

Rebuild

  • The equation from two points: slope first, then point-slope.

    Two points fix exactly one line, the way two nails fix where a straight shelf goes. The recipe has three steps. First, find the slope from the two points. Second, put that slope and either point into y − y₁ = m(x − x₁). Third, simplify to y = mx + b if the question asks for it. Either point works, because both lie on the same line, so the two versions simplify to the same equation. Check by plugging in the point you did not use.

  • What m and b mean in a story: m is the "per" amount, b is the starting amount.

    In a word problem, the slope is the amount that repeats for each unit of input: per hour, per item, per mile. The intercept, also called the initial value, is the amount that is already there before anything happens, when the input is 0. A gym membership shows both: the one-time sign-up fee is b, and the monthly charge is m. It works because in f(x) = mx + b, m is added once for every unit of x, and b is the value at x = 0. Always attach units: m is in output units per input unit, and b is in output units.

Graphs of linear functions

Know

  • Parallel lines have the same slope.

    Parallel lines point in exactly the same direction and never meet, like the two rails of a train track. Pointing the same way means having the same steepness, so the slopes are equal. If two lines had different slopes, one would climb faster than the other and they would cross somewhere. With equal slopes and different y-intercepts, the vertical gap between them stays the same forever. If the slopes and the intercepts are both equal, it is one line written twice, not two parallel lines.

  • Perpendicular slopes are negative reciprocals: they multiply to −1.

    Perpendicular lines meet at a square corner, like the edges of a sheet of paper. Take a line that goes right 3 and up 2, slope 23. Turn it a quarter turn and it goes up 3 and left 2, slope 3−2 = −32. The rise and the run traded places and one of them changed sign: that is the negative reciprocal. Multiply the two slopes, 23 × (−32) = −1, and the same happens for every such pair. The one exception: a horizontal line and a vertical line are perpendicular, but the vertical line has no slope to multiply.

  • x-intercept: set y = 0. y-intercept: set x = 0.

    The x-intercept is where a line crosses the x-axis, and every point on the x-axis has height 0, so you set y = 0 and solve for x. The y-intercept is where the line crosses the y-axis, and every point on the y-axis has x = 0, so you set x = 0. Think of a hiking trail that crosses a river at sea level: at the crossing, your height is 0. Write each intercept as a point: the x-intercept is (x, 0) and the y-intercept is (0, y).

  • Horizontal line y = c has slope 0. Vertical line x = c has undefined slope.

    A horizontal line is flat like a tabletop: every point has the same height c, so its equation is y = c. Between any two of its points the rise is 0, and 0 divided by any run is 0, so the slope is 0. A vertical line stands straight up like a flagpole: every point has the same x, so its equation is x = c. Between any two of its points the run is 0, and dividing by 0 is undefined, so it has no slope. A vertical line also fails the vertical line test, so it is not a function.

Rebuild

  • The line through a point parallel or perpendicular to another: get the slope, then point-slope.

    Two steps, every time. Step one: find the given line's slope, solving for y if needed. Keep that slope for a parallel line; flip it and change its sign for a perpendicular line. Step two: put that slope and the given point into y − y₁ = m(x − x₁), then simplify. Think of laying a new fence that must run alongside an old fence, or cross it at a square corner, starting from a post already in the ground. The old line supplies the direction; the point supplies the position.

  • Where two lines meet: set them equal, solve, then find y.

    Two line equations taken together are a system of linear equations, and its solution is the point that lies on both lines. At that point the two formulas give the same y for the same x. That is why you set the two right-hand sides equal, solve for x, and then put x into either formula to get y. Picture two runners on the same road: they meet where they are at the same place at the same moment. If the x terms cancel and leave a false statement such as 3 = 7, the lines are parallel and never meet.

Complex numbers

Know

  • i2 = −1. The imaginary unit i is defined by this fact (its opposite, −i, squares to −1 too), and every other fact in the unit leans on it.

  • For a positive number a, −a = ia. Example: −16 = 4i. Write the i first, before you multiply any roots together.

  • Standard form is a + bi. The real part is a. The imaginary part is b, the number in front of i, without the i.

  • Add and subtract part by part: real with real, i with i. Example: (3 + 2i) + (5 + 4i) = 8 + 6i.

  • The complex conjugate of a + bi is a − bi. Only the sign of the imaginary part flips.

  • The powers of i loop in four: i, −1, −i, 1, then the list starts over.

Rebuild

  • The product formula (ac − bd) + (ad + bc)i. Do not memorize it. Multiply every part by every part, replace i2 with −1, then collect. Example: (3 + 2i)(5 + 4i) = 15 + 12i + 10i + 8i2 = 15 + 22i − 8 = 7 + 22i.

  • A number times its conjugate is a2 + b2. Do not memorize it. Multiply it out and watch the two i terms cancel: (3 + 2i)(3 − 2i) = 9 − 6i + 6i − 4i2 = 9 + 4 = 13.

  • Dividing. Do not memorize the long formula. Remember the move: multiply the top and the bottom by the conjugate of the bottom, so the bottom becomes a real number.

  • A large power of i. Divide the exponent by 4 and keep only the remainder. Example: 47 ÷ 4 is 11 with remainder 3, so i47 = i3 = −i.

  • Why a · b = ab fails when both numbers are negative. Rebuild it with one case: −4 · −9 = 2i · 3i = 6i2 = −6, while 36 = 6. The two answers disagree, so write each root with i first.

  • Plotting a + bi as the point (a, b): a along the horizontal real axis, b along the vertical imaginary axis. It is the same move as plotting any point, so there is nothing new to memorize.

  • Two complex numbers are equal only when their real parts match and their imaginary parts match. This follows from the map: two addresses are the same spot only when both numbers agree.

Quadratic functions

Know

  • What a quadratic function is: f(x) = ax2 + bx + c with a ≠ 0. The highest power of x is x2, and the graph is always a parabola.

  • Which way it opens. If a > 0 the parabola opens up and the vertex is its lowest point, so there is a minimum value. If a < 0 it opens down and the vertex is its highest point, so there is a maximum value. Either way, the value is the y-coordinate of the vertex, k.

  • Reading vertex form. In f(x) = a(x − h)2 + k the vertex is (h, k) and the axis of symmetry is the vertical line x = h. Example: f(x) = 2(x − 3)2 + 5 has vertex (3, 5) and axis x = 3.

  • Finding the vertex from general form: h = −b2a, then k = f(h). Example: for f(x) = x2 − 4x + 3, h = 42 = 2 and k = f(2) = 4 − 8 + 3 = −1, so the vertex is (2, −1).

  • The intercepts. The y-intercept is where x = 0, and it is always (0, c). The x-intercepts are where y = 0, so you solve ax2 + bx + c = 0. There are two, one or none.

  • The discriminant D = b2 − 4ac counts the x-intercepts before you solve: D > 0 means two, D = 0 means one (the vertex sits on the x-axis), D < 0 means none.

  • In a word problem, a question about the largest or the smallest amount is a question about the vertex, once you check that the parabola opens the right way for the question (down for a largest, up for a smallest) and that the vertex's input is one the problem allows. Its first number says where the largest or smallest amount happens. Its second number says how big or how small that amount is.

Rebuild

  • Vertex form from general form. Do not memorize the finished formula. Complete the square each time, with the one extra step for the number a in front of x2, or take the shortcut: h = −b2a, k = f(h), and a is the same in both forms.

  • Domain and range. Do not memorize two range formulas. Sketch a valley or a hill and read it. You can stand at any x, so the domain is (−∞, ∞). A valley's heights run from the floor up: [k, ∞). A hill's heights run from the top down: (−∞, k].

  • The axis of symmetry. It is the vertical line through the vertex, so once you have the vertex (h, k) you have the line x = h. There is nothing separate to memorize.

  • Why the y-intercept is (0, c). Put 0 in for x: the ax2 term and the bx term both become 0 and only c is left. This takes a few seconds, so rebuild it if you forget it.

  • Why the discriminant counts. It is the number under the square root in x = −b±b2−4ac2a. A positive number under the root gives two answers from the ±. Zero gives one answer. A negative number has no real square root, so there are no x-intercepts.

  • Setting up a largest or smallest word problem. Write the amount as a quadratic function from the sentence, using area of a rectangle = width × length or revenue = price × number sold, then find the vertex and check that the parabola opens the right way and that the vertex's input makes sense in the problem. Each problem is built fresh, so there is no setup formula to memorize.

Power functions and polynomial functions

Know

  • A power function is f(x) = kxp: one fixed nonzero number times x raised to one fixed power. Whole-number powers also make polynomials; negative and fractional powers need their own domain checks.

  • The names of a polynomial's parts. A term is one piece. A coefficient is the number that multiplies the power of x. The degree is the highest power of x with a coefficient other than 0, once like terms are combined; the zero polynomial has none. The leading term is the term with the highest power, wherever it sits in the line. The leading coefficient is the number in front of the leading term.

  • The end behavior of a polynomial is the end behavior of its leading term. Far to the left and far to the right, the other terms do not change where the arms point.

  • The two questions that set the arms of a polynomial of degree 1 or more. Is the leading coefficient positive or negative? Positive points the right arm up, negative points it down. Is the degree even or odd? Even makes the left arm match the right arm, odd makes it point the opposite way.

  • The y-intercept is the point (0, f(0)): put in 0 for x. The x-intercepts are the points where f(x) = 0: set the polynomial equal to 0 and solve.

  • The zero product property: if A · B = 0, then A = 0 or B = 0. This is why factoring finds the x-intercepts.

  • A polynomial of degree n, n at least 1, has at most n − 1 turning points. The words at most matter: n − 1 is a ceiling, not a promise.

Rebuild

  • The four end behavior poses of a polynomial of degree 1 or more (both arms up, both arms down, left down with right up, left up with right down). Do not memorize the four rows. Ask the two questions, sign and then even or odd, and you have the pose in ten seconds.

  • Why the leading term wins. Put a large input into x2 + 100x. At x = 1000 the two pieces are 1,000,000 and 100,000, and the gap only grows as x grows. Close to x = 0 the smaller power can be ahead, far away it never is.

  • The symmetry of a power function. Do not memorize it; rebuild it. For every x, (−x)p = (−1)p · xp, so f(−x) = f(x) when p is even and f(−x) = −f(x) when p is odd. One pair of opposite inputs shows it: (−2)2 = 4 and 22 = 4 give the same output, and an even power's graph mirrors across the y-axis; (−2)3 = −8 and 23 = 8 give opposite outputs, and an odd power's graph looks the same after a half turn around (0, 0).

  • The basic shapes with no number in front. Even powers from 2 up, such as x2, bend into a U, while x0 is the flat line y = 1. Odd powers such as x3 climb from the lower left, through (0, 0), to the upper right. Plot x = −2, −1, 0, 1, 2 to see either one again.

  • Doubling the input of a power function. Doubling x makes x2 four times as large, because (2x) · (2x) = 4x2, and makes x3 eight times as large, because (2x) · (2x) · (2x) = 8x3.

  • The y-intercept is the constant term. Put in x = 0 and every term that holds an x becomes 0, so only the term with no x is left.

  • The backward turning point rule. Start from at most n − 1 turning points and add 1: a polynomial graph that is not a flat line, with t turning points, has a degree of at least t + 1. Three turning points means degree 4 or more.

  • Standard form. Sort the terms by power, highest first. You never need to memorize the order of a given polynomial, you rewrite it.

  • Sorting functions: simplify, test the one-power form, then test whole-number exponents. The labels can overlap.

  • Building a polynomial: give each zero r a factor x − r, choose the leading sign from the right end, and check the given height at x = 0.

  • A graph with t turns requires degree at least t + 1. A curved flat crossing can rule out degree 1 even with no turns.

Graphs of polynomial functions

Know

  • A product is 0 exactly when at least one of its factors is 0.

  • A zero of a polynomial is an input whose output is 0. On the graph a real zero c marks the point (c, 0), where the curve meets the x-axis.

  • For a polynomial that is not the constant 0, the multiplicity of a zero is how many times its factor appears. Odd multiplicity: the graph crosses the x-axis. Even multiplicity: the graph touches the x-axis and turns back. A larger multiplicity makes the graph lie flatter there.

  • Intermediate Value Theorem: if f(a) and f(b) have opposite signs, the polynomial has at least one zero between a and b.

  • On a closed interval, the global maximum and the global minimum each sit at a local maximum or local minimum inside the interval, or at an endpoint. Check every one of them.

  • A maximum or minimum is an output, a y-value. The place where it happens is an input, an x-value.

Rebuild

  • The zero a factor gives. Do not memorize a sign rule. Set the factor equal to 0 and solve: x + 2 = 0 gives x = −2, and x − 3 = 0 gives x = 3. A lone x gives the zero 0. A factor that is a nonzero number gives no zero, because it is never 0. This takes ten seconds.

  • Why the Intermediate Value Theorem is true: the graph of a polynomial is one unbroken curve, so it cannot get from below the x-axis to above it without meeting it. The theorem promises at least one zero in between. It does not say where.

  • The sign of f on a stretch between neighboring zeros: the zeros cut the x-axis into intervals, and f(x) keeps one sign on each interval. Plug in one test point from inside the interval and read the sign of the output.

  • The y-intercept: plug in 0 for x. The point is (0, f(0)).

  • A formula of lowest degree from a graph, when every zero is real: each zero c gives the factor (x − c), the behavior at the zero gives the lowest multiplicity that fits, and one point that is not on the x-axis gives the number a in front. Substitute that point and solve the equation for a. Then check every other given point and both arms; after a failed check, recheck the readings and the arithmetic first; then raise only a power the graph leaves open, an even power above 2 at a touch or an odd power above 3 at a flattened crossing, while a straight crossing stays at power 1.

  • Why the largest value can sit at an endpoint: the graph may still be climbing when the interval ends and finish higher than every hilltop before it. Compare the endpoint's height with every other candidate.

  • The box whose volume you make as large as possible is the same search for a global maximum.

Dividing polynomials

Know

  • The four names: the dividend is what you split up, the divisor is what you split by, the quotient is the answer written on top, and the remainder is what is left at the end.

  • The four moves of polynomial long division, in order: divide the leading term of what you have by the leading term of the divisor, multiply that result by the whole divisor, subtract, bring down the next term. Then repeat.

  • The setup before any division: write the dividend and the divisor in descending powers, with a 0 term for each missing power. For example, x3 − 7x + 10 is written x3 + 0x2 − 7x + 10.

  • When to stop: when every term has been brought down and what is left is 0 or has a degree (its highest power of x) lower than the degree of the divisor. What is left is then the remainder.

  • The check for every division: dividend = divisor × quotient + remainder.

  • The synthetic table works for a divisor of the form x − c. The number in the box is c, so x − 3 puts 3 in the box and x + 2 puts −2 in the box. A divisor of degree two goes back to long division.

  • The synthetic loop: bring down the first coefficient, then multiply by c and add, column after column. The last bottom number is the remainder. The numbers before it are the coefficients of the quotient.

  • A remainder of 0 means the divisor is a factor of the dividend, and dividend = divisor × quotient. A remainder that is not 0 means the divisor is not a factor.

  • A fraction works in the synthetic box. For ax + b, scale the table quotient by 1/a. A graph point (c, 0) gives a factor x − c.

Rebuild

  • The fraction form, P(x)D(x) = Q(x) + R(x)D(x). Do not memorize it. Start from dividend = divisor × quotient + remainder and divide both sides by the divisor. That takes ten seconds, and it holds wherever D(x) ≠ 0.

  • The degree of the quotient. Do not memorize it. The first divide move shows it: dividing by x − c makes the degree one less than the degree of the dividend, and dividing by a divisor of degree two makes it two less, as long as the dividend's degree is at least the divisor's. A dividend of lower degree gives a quotient of 0 and is its own remainder.

  • The shape of the remainder. Do not memorize it. It comes from the stop rule: the remainder must be 0 or have a lower degree than the divisor. So dividing by x − c leaves a plain number, and dividing by a divisor of degree two leaves something of the form mx + n, where m or n may be 0.

  • Why the 0 for a missing power matters. Each position in the row stands for one power of x, the way each digit in 1,734 stands for one place. Leave out the 0 and every number after it lands in the wrong position.

  • Why multiplying back, with the size test, is a full check. Packing loses no cookies, so the boxes and the tray together must hold the whole batch. If divisor × quotient + remainder does not give back the dividend, there is a slip somewhere in the division. If it does, also check that the remainder is 0 or has a lower degree than the divisor.

  • How a remainder of 0 finishes a factoring problem. It turns the dividend into divisor × quotient, two multiplied pieces. Then look at the quotient, because often it can be split again.

Zeros of polynomial functions

Know

  • Remainder Theorem: divide f(x) by x − c and the remainder is f(c). Plugging in c gives the same number as the remainder from dividing by x − c.

  • Factor Theorem: x − c is a factor of f(x) exactly when f(c) = 0. It runs both ways.

  • The sign inside a factor: the zero c goes with the factor x − c. The zero 3 gives x − 3, and the zero −2 gives x + 2.

  • Rational Zero Theorem, the list: every rational zero looks like ± factoroftheconstanttermfactoroftheleadingcoefficient. The list holds candidates, not zeros, so test each one.

  • Fundamental Theorem of Algebra: a polynomial of degree n has exactly n zeros, counted with multiplicity. A zero that repeats counts once for each repeat.

  • Complex conjugate pairs: when every coefficient is real and a + bi, with b ≠ 0, is a zero, then a − bi is a zero too.

Rebuild

  • Why the remainder is f(c). Do not memorize a proof. Write f(x) = (x − c) · q(x) + r and put c in for x. The first part becomes 0 · q(c) = 0, so f(c) = r.

  • Why the Factor Theorem follows. The remainder is f(c), so f(c) = 0 means nothing is left over, and f(x) = (x − c) · q(x).

  • Two ways to get f(c): plug c into every power, or run synthetic division by c and read the last number in the bottom row. They must agree, so one checks the other.

  • The whole search for zeros. Do not memorize it as a script. Rebuild it from the picture of a box inside a box: list the candidates, test one, divide out the zero that works, repeat on the smaller quotient, and use the quadratic formula once the top power is x2. If no candidate works while the top power is 3 or more, the search needs another method.

  • f(−x) for Descartes' Rule of Signs. Do not memorize a second polynomial. Put −x in for x: each term with an odd power changes sign, and each term with an even power, and the constant term, keeps its sign.

  • A polynomial from its zeros. One factor x − c for each zero, a number a in front, then put the known point in for x and y and solve for a.

  • The factor from a complex conjugate pair. Multiply (x − (p + qi))(x − (p − qi)) and use i2 = −1 to get (x − p)2 + q2. It takes a few lines, so the result also goes on the cheat sheet.

Rational functions

Know

  • A rational function is a fraction with a polynomial on top and a polynomial on the bottom. Its domain is every real number except the inputs that make the bottom 0. Find those inputs on the original formula, before any canceling.

  • Factor the top and the bottom, then cancel. A factor (x − a) that cancels with no copy of it left in the bottom leaves a hole at x = a. A factor (x − a) that stays in the bottom makes a vertical asymptote, the line x = a.

  • For a top that is not the constant 0, compare the degree of the top with the degree of the bottom. Top degree < bottom degree: horizontal asymptote y = 0. Degrees equal: horizontal asymptote y = leadingcoefficientofthetopleadingcoefficientofthebottom. Top degree bigger by exactly 1: a slant asymptote and no horizontal asymptote. Top degree bigger by 2 or more: neither.

  • Intercepts. For the y-intercept, put 0 in for x. An x-intercept sits at each input where the top is 0 and the bottom is not 0.

  • How to read arrow notation. The arrow → says "approaches". A raised + says from the right. A raised − says from the left. So x → 0+ reads "x approaches 0 from the right."

  • The picture of the reciprocal function f(x) = 1x: two branches, a wall at x = 0, and the flat line y = 0 that both branches settle toward. Neither the input nor the output can ever be 0.

Rebuild

  • The four arrow sentences for 1x. Do not memorize them. Rebuild them from the trip of 1 mile: a tiny speed means a huge time, and a huge speed means a tiny time. For negative inputs the outputs are negative, so the left branch runs down beside the wall.

  • Why the degree comparison works. It is a tug of war between the highest powers of x. For large enough x the highest power on each side outgrows the rest, so comparing those powers tells which side wins, or that they tie. Putting x = 1000 into the top and the bottom in your head shows it for a typical example, but one input proves nothing.

  • The height of a hole. Nothing to memorize: plug the hole's x into the simplified formula, the one left after canceling.

  • The slant asymptote. Divide the top by the bottom and drop the remainder. It is one division, done fresh each time, so there is no formula to carry around.

  • Why a zero of the top that also makes the bottom 0 is not an x-intercept. That input is not in the domain, so the graph has no point there at all.

  • The sketching order. Ask where the graph could change from above the x-axis to below it: only at an x-intercept, a vertical asymptote or a hole. Split the x-axis at those places and send one test point into each interval.

  • Writing a formula from a graph. Rebuild it from the landmarks: each x-intercept puts a factor on top, each vertical asymptote puts a factor on the bottom, a hole puts the same factor on both, and one more point gives the number in front.

Inverses and radical functions

Know

  • What an inverse function does: it runs a function backward. It takes an output and hands back the one input that produced it.

  • Only a one-to-one function has an inverse function. One-to-one means every output comes from one input. Squaring fails: 3 and −3 both give 9. The horizontal line test is the check on a graph. A whole parabola fails it.

  • The method for every inverse in this unit: write y = f(x), swap x and y, then solve for y.

  • Domain and range trade places: the domain of f⁻¹ is the range of f, and the range of f⁻¹ is the domain of f.

  • A parabola f(x) = a(x − h)2 + k has its vertex at (h, k). Cut there to get a restricted domain: keep x ≥ h (the right half) or x ≤ h (the left half).

  • Undoing a square gives two candidates, one plus and one minus, which are the same only when the square is 0. The restricted domain picks the sign: plus for the right half, minus for the left half. Undoing a cube gives one value and takes no ± sign.

  • A square root (and every even root) needs its inside to be 0 or more. A cube root (and every odd root) takes every real number.

  • The test for inverses: f⁻¹(f(x)) = x and f(f⁻¹(x)) = x, in both orders. On a graph the two curves are mirror images across the line y = x, and the point (a, b) on one means (b, a) is on the other.

Rebuild

  • The inverse of a quadratic on a restricted domain, f⁻¹(x) = h ± (x−k)÷a. Do not memorize it. Swap x and y, subtract k, divide by a, take the square root, add h. Then let the restricted domain pick the sign.

  • The inverse of a cubic f(x) = a(x − h)3 + k with a ≠ 0, f⁻¹(x) = ∛(x−ka) + h. Do not memorize it. Swap x and y, subtract k, divide by a, take the cube root, add h. No cut and no ± sign.

  • The inverse of f(x) = ax+bcx+d with c ≠ 0 and ad − bc ≠ 0, f⁻¹(x) = −dx+bcx−a. Do not memorize it. Swap x and y, multiply both sides by the bottom, move every term with y to one side, pull y out as a common factor, then divide.

  • The range of a quadratic. Do not memorize it. (x − h)2 is never negative, so a(x − h)2 + k is at least k when a > 0 and at most k when a < 0. Cutting the domain at the vertex does not change the range.

  • The domain of a square root function such as ax+b. There is no formula to memorize. Write inside ≥ 0, which is ax + b ≥ 0, and solve that inequality each time.

  • The one number such a fraction ax+bcx+d cannot take in and the one number it never gives out. Rebuild both: the input that makes the bottom 0 is left out of the domain, and the number left out of the range is the number the inverse function cannot take in.