Study sheet
What to know by heart, and what to rebuild from a memory hook.
Angles and their measure
Know
180° = π radians. Every conversion between degrees and radians comes from this one fact.
A half turn has two names: 180 degrees, or π radians. Think of it as an exchange rate, like 1 foot = 12 inches: once you know the rate, every conversion is a multiplication by it. Why is a half turn π radians? A radian counts how many radius-lengths of arc an angle sweeps out. Walk halfway around a circle and the arc is half the circumference, πr, which is π radius-lengths. So 180° = π, and everything else follows: 90° = , 360° = 2π, 1° = radian, and 1 radian = ≈ 57.30°.
Counterclockwise is positive, clockwise is negative.
An angle is a turn, and the direction of the turn gives it a sign. Picture the number line, where right is positive and left is negative. For angles, counterclockwise (against the clock hands) is positive and clockwise is negative. This is a convention, chosen so that a growing positive angle visits Quadrants I, II, III, IV in their numbered order. Everyone uses the same choice, like everyone driving on the same side of the road. Ignore it and +90° and −90° would look alike, yet one points straight up and the other straight down.
Quadrants run I, II, III, IV counterclockwise, 90° each.
The x-axis and the y-axis cut the plane into four quarters, like a window with four panes. Quadrant I is the upper right, where x and y are both positive. From there the numbers run counterclockwise: II upper left, III lower left, IV lower right. Each quadrant is a quarter turn wide, 90° or , so an angle between 0° and 90° ends in I, 90° to 180° in II, 180° to 270° in III, and 270° to 360° in IV. They run counterclockwise because positive angles do, so a growing angle meets them in order. An angle that stops exactly on an axis is a quadrantal angle, in no quadrant.
Coterminal: add or subtract 360° (or 2π).
Coterminal angles end on the same terminal side. Think of a runner on a circular track: after one extra lap, or one lap run backward, she stops at the same spot. Adding or subtracting a full turn (360°, or 2π in radians) leaves the terminal side where it was, so θ, θ + 360°, θ − 360° and θ + 720° are all coterminal. The rotations are different, but they end in the same place, so every trig value is the same. In radians, write 2π with the same bottom number as the angle before you add.
Complementary adds to 90°, supplementary to 180°.
Two positive angles are complementary when together they fill a square corner, 90°. They are supplementary when together they make a straight line, 180°, like a door and the wall beside it: the angle the door is open plus the angle on its other side always make a flat 180°. So the complement of α is 90° − α and the supplement is 180° − α. These are definitions. Both angles must be positive, so an angle of 90° or more has no complement.
Rebuild
The quadrant table: the borders are 90°, 180°, 270°, 360° in degrees, , π, , 2π in radians, and about 1.57, 3.14, 4.71, 6.28 as decimals.
You do not memorize this table; you rebuild it from quarter turns. A full turn is 360° = 2π, so each quadrant is a quarter turn: 90° = . The borders are one, two, three and four quarter turns: 90°, 180°, 270°, 360°, which are , π, , 2π. For the decimals, halve π ≈ 3.14 to get 1.57, then keep adding 1.57: 3.14, 4.71, 6.28. It works like mile markers placed every 1.57 along a road: to place an angle, find the two markers it sits between.
The conversion fractions: multiply by to get radians and by to get degrees. The unit you want goes on top.
and both equal 1, because π radians and 180° are the same angle, the way equals 1. Multiplying by 1 changes the units without changing the size of the angle. Pick the fraction whose bottom matches the unit you are leaving, so that unit cancels: degrees on the bottom cancel degrees and leave radians, and π on the bottom cancels π and leaves degrees. It works like a currency exchange, where dollars times euros per dollar gives euros.
The common-angle table. Divide 180 by the bottom number: is 180 ÷ 6 = 30°.
The common angles are 0°, 30°, 45°, 60°, 90°, 180°, 270°, 360°, which in radians are 0, , , , , π, , 2π. You can rebuild the list instead of memorizing it. Since π stands for 180°, means 180° cut into n equal slices, like half a pizza cut into n pieces: is 180 ÷ 6 = 30°. Going the other way, 180 divided by the degrees gives the bottom number: 180 ÷ 45 = 4, so 45° = . A number on top counts slices: is 3 × 90° = 270°.
Trigonometric functions
Know
SOH-CAH-TOA for a right triangle.
SOH-CAH-TOA names three fractions made from the sides of a right triangle, seen from an acute angle θ: sine = , cosine = , tangent = . Picture a ladder leaning against a wall with θ at the floor: the sine is the fraction of the ladder's length that turns into height. Why do the fractions depend only on the angle? Every right triangle with the same θ is a scaled copy of every other, and scaling multiplies the top and the bottom of a fraction by the same number, which leaves it unchanged. That is why sin θ is a function of θ alone.
For a point (x, y): cos θ = and sin θ = , with r = always positive.
A right triangle cannot hold an angle of 150° or 200°, so for any angle you use a point instead. Put θ in standard position and pick any point P(x, y) on its terminal side. x says how far east or west, y how far north or south, and r = is the straight-line distance back to the origin, like a GPS reading. Then cos θ = and sin θ = . In Quadrant I this is SOH-CAH-TOA again: x is the adjacent leg, y the opposite leg, r the hypotenuse. The signs of x and y carry the direction; r is a distance, so it is never negative.
Take the point (cos θ, sin θ) on the unit circle, the circle of radius 1. Its left-right leg is cos θ, its up-down leg is sin θ, and the slanted side back to the center is the radius, 1. The Pythagorean theorem for that small right triangle says θ + θ = . Picture a ladder exactly 1 unit long: however steeply you lean it, height squared plus base squared is always 1. This Pythagorean identity lets either sine or cosine give you the other, up to its sign. θ means (sin θ, the sine squared.
The three reciprocal pairs: sin with csc, cos with sec, tan with cot.
Each pair is one fraction and the same fraction turned upside down. Sine is and cosecant is ; cosine is and secant is ; tangent is and cotangent is . Like a speed and its flip, 3 miles per hour or hour per mile, each pair holds the same information. So csc θ = , sec θ = and cot θ = . Each pair multiplies to 1, partners always share a sign, and where one is 0 its partner is undefined.
Which functions are positive in which quadrant.
Because r is always positive, a sign can come only from x or y. Sine is , so it is positive above the x-axis (Quadrants I and II). Cosine is , positive right of the y-axis (I and IV). Tangent is , positive when x and y have the same sign (I and III). Each reciprocal copies its partner's sign. Think of sine as height above the ground and cosine as distance east. Summary: I all positive, II sine, III tangent, IV cosine, each with its reciprocal; the rest are negative.
Rebuild
The special-angle table. Draw the two triangles, or count , , , , over 2.
You do not need to memorize eighteen values. Draw the two special triangles: half a square, with legs 1 and 1 and hypotenuse , and half an equilateral triangle, with sides 1, and 2. Then read any value with SOH-CAH-TOA. Or count: the sines of 0°, 30°, 45°, 60°, 90° are , , , , , each over 2, and cosine is the same list backwards. The table is a recipe you cook from, not a menu you memorize. Tangent is sine over cosine, and the last three functions are flips.
The quadrantal table. Use the four points (1, 0), (0, 1), (−1, 0), (0, −1): cos is x, sin is y.
At 0°, 90°, 180° and 270° the terminal side lies on an axis, so there is no triangle. Use the point one unit out on that axis, like the four points of a compass: east (1, 0), north (0, 1), west (−1, 0), south (0, −1). There r = 1, so cos θ = x and sin θ = y. Build the other four from those two: tan θ = , cot θ = , sec θ = , csc θ = . A 0 on top gives 0; a 0 on the bottom means undefined. Any angle coterminal with one of the four uses the same point.
θ + 1 = θ and θ + 1 = θ. Get them by dividing every term of θ + θ = 1 by θ, or by θ.
Memorize one identity, θ + θ = 1, and grow the other two from it. Dividing every term of a true equation by the same nonzero amount keeps it true, like halving every ingredient of a recipe. Divide by θ: is θ, is 1, and is θ, so θ + 1 = θ. Divide by θ instead and you get 1 + θ = θ. Each one holds wherever its functions are defined.
Properties of the trigonometric functions
Know
Cosine and secant are even. The other four are odd.
Walking a distance t clockwise instead of counterclockwise lands you at the mirror image of P(t) across the x-axis, like your reflection in a still lake: the same left-right position, the opposite height. So cos(−t) = cos t, because x stays, and sin(−t) = −sin t, because y flips. A function with f(−t) = f(t) is an even function; one with f(−t) = −f(t) is an odd function. Secant is , so it is even too. Cosecant, tangent and cotangent each contain one sine, so the flipped sign survives and they are odd.
Period 2π for sin, cos, sec, csc. Period π for tan and cot.
A function is periodic when its values repeat, like a clock that shows the same time every 12 hours; the period is the shortest repeat. Adding 2π walks the unit-circle point one full lap, back to where it started, so sine, cosine, secant and cosecant repeat every 2π (360°). Tangent repeats sooner: half a lap, π, sends (x, y) to (−x, −y), directly across the circle, and = . Sine does not survive half a lap, because y turns into −y.
sin and cos stay between −1 and 1.
Sine and cosine are the coordinates of a point on the unit circle, and a circle of radius 1 never reaches past 1 in any direction. A rider on a Ferris wheel of radius 1 is never more than 1 above or below the center, nor more than 1 to either side. So −1 ≤ sin t ≤ 1 and −1 ≤ cos t ≤ 1: the range of each is [−1, 1]. The identity agrees: in t + t = 1 both squares are at least 0, so neither can pass 1. Any input t is allowed; only the output is trapped.
The four-step method: (1) remove a minus sign with even or odd, (2) remove extra laps with the period, (3) find the quadrant for the sign, (4) finish with a value you know.
Any angle, however large or negative, can be traded for a small positive one whose value you know, the way a clock turns 30 hours after midnight into 6 o'clock. Step 1, negative: cos and sec drop the minus sign; sin, csc, tan and cot move it out front. Step 2, too big: subtract whole periods. Step 3: the quadrant gives the sign. Step 4: read the value from the special or quadrantal angles. Each step swaps the expression for an equal one, so the answer never changes along the way.
Rebuild
The sign table, from "All Students Take Calculus".
The sign table has four rows (quadrants) and six columns (functions), 24 entries, and you rebuild all of it from four letters. Write A, S, T, C in Quadrants I to IV, counterclockwise from the upper right. In each quadrant the named function and its reciprocal are positive and the other four are negative; in Quadrant I, All are positive. The letters come from the coordinates, the way directions come from a map: sine has the sign of y, cosine the sign of x, and tangent is positive where x and y agree.
Where sine and cosine increase or decrease. Picture the point going around the unit circle and watch its height (sine) and its left-right position (cosine).
Picture a rider on a Ferris wheel of radius 1, starting at the right end, (1, 0), and turning counterclockwise. The rider's height is the sine; the left-right position is the cosine. In Quadrant I the rider climbs (sine increases) and moves left (cosine decreases). In Quadrant II the rider falls (sine decreases) and keeps moving left (cosine decreases). In Quadrant III the rider keeps falling (sine decreases) but now moves right (cosine increases). In Quadrant IV the rider climbs (sine increases) and moves right (cosine increases). Increasing means the value goes up as t grows, whatever its sign.
Find the quadrant of a plain number (an angle in radians) by comparing it with 1.57, 3.14, 4.71 and 6.28.
A plain number like 5.2 or −9 is an angle in radians. The landmarks 1.57, 3.14, 4.71 and 6.28 are , π, and 2π, the quarter-turn borders, like cross streets that tell you which block a house number is on. If the number is negative, add 6.28 until it is positive; if it is bigger than 6.28, subtract 6.28 until it is smaller. Each 6.28 is one full lap, so the terminal side, and with it the quadrant, stays the same.
Graphs of sine and cosine
Know
Sine starts in the middle going up. Cosine starts at the top.
Amplitude = |A|. Period = .
A negative A flips the wave; the amplitude is still positive.
Rebuild
The five key points: cut one period into quarters.
The equation from a graph: starting position, then amplitude, then period.
Graphs of the other four functions
Know
tan and sec break where cos x = 0: at plus any multiple of π.
cot and csc break where sin x = 0: at any multiple of π.
tan and cot have period π.
Rebuild
The shapes of sec and csc: draw cos or sin lightly, put an asymptote at every zero, and draw U-shapes that touch the peaks.
Sinusoidal functions
Know
In y = A sin(ωx − φ) + B: A gives the amplitude, ω the period, φ with ω the phase shift, B the midline.
A plus sign inside shifts left. A minus sign inside shifts right.
Rebuild
The start and length of one cycle: solve 0 ≤ ωx − φ ≤ 2π.
A model from data: half the difference is the amplitude, half the sum is the midline.
Inverse trigonometric functions
Know
The three ranges, the stretches every principal value comes from: arcsin x lies in [−, ], arccos x lies in [0, π], and arctan x lies in (−, ) with both ends left out. In degrees: −90° to 90°, 0° to 180°, and strictly between −90° and 90°. These are agreements, not results, so nothing rebuilds them: know them cold.
What the notation means: sin⁻¹ x, also written arcsin x, is the one angle in that range whose sine is x. In symbols, y = sin⁻¹ x means sin y = x with y in the range. The same goes for cos⁻¹ x and tan⁻¹ x inside their own ranges. The −1 means "run it backward", not "one over": sin⁻¹ x is not .
Rebuild
Why each trig function is cut first. An inverse function hands each output back to the one input that made it, so no two inputs may share an output. On a graph, that is the horizontal line test, and a function that passes it is a one-to-one function. Sine, cosine and tangent repeat, so each fails until it is cut to a restricted domain, the same stretch its inverse uses as its range. Rebuild this from the Ferris wheel, where most heights come twice a lap; there is nothing here to memorize.
The domains and the asymptotes. The inverse sine and inverse cosine take only inputs from −1 to 1, because a sine or a cosine is a height or a left-right position on a wheel of radius 1, so arcsin 2 has no value. The inverse tangent takes every real number, because the spoke can have any steepness. As the spoke tilts toward straight up, its steepness grows past any number while the angle never reaches ; toward straight down the same happens with negative numbers and −. So the graph of arctan creeps toward its horizontal asymptotes, y = and y = −, without touching them. Read all of this off the wheel instead of memorizing it.
The sign rules arcsin(−x) = −arcsin x, arctan(−x) = −arctan x and arccos(−x) = π − arccos x. Rebuild them from the ranges rather than memorizing three formulas: a negative input sends the inverse sine and the inverse tangent below the hub, the same size of turn taken the other way, and it sends the inverse cosine left of the hub on the top half, a turn of π minus the reference angle.
Exact values in four steps. (1) Drop any minus sign from the input. (2) Find the reference angle r: the special angle from 0 to whose sine, cosine or tangent (the one being undone) is that number. (3) Let the sign pick the side: r for a zero or positive input; for a negative input, −r with arcsin or arctan (below the hub: quadrant IV, or straight down for arcsin(−1)) and π − r with arccos (left of the hub: quadrant II, or the left end for arccos(−1)). (4) Check that the angle lies in the range and gives the input back. For arccos(−): r = , and the input is negative, so the answer is π − = .
When a function and its inverse cancel. Number to angle to number always works: sin(arcsin x) = x for every x from −1 to 1, because arcsin x is an angle whose sine is x (for other x there is no value). Angle to number to angle works only on the range: arcsin(sin x) = x only when x already lies in [−, ], because the inverse sine answers only from its range; for any other x, the answer is the angle in that range with the same sine. Cosine works the same way with [0, π]. Rebuild both cases from the range instead of memorizing them. Example: arcsin(sin ) = arcsin = , not .
Mixing functions with a right triangle. For cos(arcsin a), let θ = arcsin a; draw θ in the quadrant its range and the sign of a allow; label the opposite side and the hypotenuse from a (for a = , 3 and 5), with a minus sign on a leg that points left or down; find the third side from ad + op = hy; then read the ratio the outside function asks for, here . The letter version, cos(arcsin x) = , comes out of the same triangle with opposite side x and hypotenuse 1, so do not memorize it.
Every answer in one lap from one key press. Press the key on the number without its minus sign to get the reference angle α. The answers on [0, 2π) are the angles among α, π − α, π + α and 2π − α that sit in quadrants where the function has the sign you need. When the number is 0, or 1 or −1 for sine or cosine, the answers sit on the axes instead: keep each different angle of the four that lies in [0, 2π) and solves the equation. Rebuild the four from the wheel instead of memorizing them: α past the right end, α short of the left end, α past the left end, and α short of a full lap.
How many answers to expect in one lap. A level line at height k (for sine) or an upright line at left-right position k (for cosine) crosses the wheel twice when −1 < k < 1, touches it once when k = 1 or k = −1, and misses it when k > 1 or k < −1. A line through the hub meets the wheel at two opposite seats for any steepness, so tan t = k always has two answers. Count first, then hunt.
Trigonometric equations
Know
The point at angle t on the unit circle is (cos t, sin t): cos t is your sideways position x, sin t is your height y, and tan t = wherever cos t ≠ 0.
Sine and cosine never go above 1 or below −1, so sin t = c and cos t = c have no solution when c > 1 or c < −1. Tangent can equal any number.
Signs by quadrant, for sine, cosine and tangent: all three are positive in quadrant I, only sine in II, only tangent in III, only cosine in IV.
The two moves on one turn, for a c that is not an axis value: the size of c, its sign ignored, gives the reference angle α; the sign of c gives the two quadrants where the function has that sign.
The periods: sine and cosine repeat every full turn, 2π; tangent repeats every half turn, π. So the general solution of sin t = c or cos t = c adds 2kπ to each answer on one turn, and the general solution of tan t = c adds kπ to the answer in [0, π), where k is any integer.
The identity t + t = 1 holds at every angle. Here t means (sin t, the sine squared, not the sine of .
Squaring both sides can add extraneous solutions, so put every candidate back into the original equation. Dividing both sides by cos t can lose solutions, so check and in the original before you divide.
A calculator's inverse key (arcsin, arccos or arctan), used in radian mode, gives one angle only; the second angle on the turn comes from the unit circle.
Rebuild
What solving means: a solution is an angle that makes the trigonometric equation true. An identity such as t + t = 1 is true at every angle; sin t = is true only at some, and solving means finding every one of them.
Why one turn usually gives two answers: draw a level line at height c across the wheel. For −1 < c < 1 it crosses the rim twice, once where you climb on the right and once where you sink on the left; at c = 1 or c = −1 it touches only the top or the bottom. For cos t = c draw a vertical line instead, and for tan t = c a straight line through the hub with slope c, which meets the rim at two opposite points.
Where the reference angle α lands, rebuilt from a quick sketch of the wheel rather than memorized: α in I; π − α in II, stopping α short of the half turn; π + α in III, going α past the half turn; 2π − α in IV, stopping α short of the full turn.
Answers on the axes: put the seat at the right (0), the top (), the left (π) and the bottom (), and read off the height sin t and the sideways distance cos t at each. Tangent is 0 wherever the height is 0.
The general solution of sin t = c, cos t = c or tan t = c: list every answer on one turn and add 2kπ to each for sine and cosine. For tangent, take the one answer in [0, π) and add kπ. Rebuild it from the wheel coming back after every ride. With a multiple such as 2t inside, the turns are added to the inside angle and divided along with it: 2t = a + 2kπ gives t = + kπ.
A multiple of the angle: in sin 2t = c, the inside angle u = 2t makes two turns while t makes one, so find every u with 0 ≤ u < 4π, then divide each by 2. For nt, use n turns, 0 ≤ u < 2nπ, and divide by n. Rebuild it with a wheel spinning n times as fast.
A quadratic in sin t: cover sin t with u, factor, cross out any u above 1 or below −1, then solve sin t = u for each u left. In 2 t − 7 sin t − 4 = 0, (2u + 1)(u − 4) = 0 gives u = − or u = 4; the 4 is crossed out, and sin t = − gives t = or t = . Cosine works the same way; for tangent, keep every u.
Identity first: when t meets a lonely sin t, swap t for 1 − t (replace the squared function, keep the lonely one). When a·sin t = b·cos t with a ≠ 0, check and in the original, then divide by cos t and by a to reach tan t = .
The calculator's second answer, rebuilt from mirror points on the wheel rather than memorized: mirror points left and right share a height, so for sine it is π − α; mirror points above and below share a sideways distance, so for cosine it is 2π − α; opposite points share a slope, so for tangent it is α + π. Add 2π to a negative answer, and round only at the end, to four decimal places, writing ≈.
Why squaring lets in extra answers: = holds when a = b and also when a = −b, since and (−3 are both 9. Squaring sin t + cos t = 1 gives four candidates on one turn, 0, , π and ; only 0 and make the original true.
Trigonometric identities
Know
What an identity is: its two sides are equal at every angle where both are defined. An equation is a question instead: at which angles are the two sides equal? Usually only some angles work. One angle where both sides are defined and differ, a counterexample, proves a claim is not an identity; agreement at any number of angles never proves that it is.
The reciprocal identities: csc t = , sec t = , cot t = .
The quotient identity tan t = .
The Pythagorean identity t + t = 1, true at every angle t.
What a negative angle does: cos(−t) = cos t, so cosine is an even function; sin(−t) = −sin t, so sine is an odd function.
The usual first move, and the move to make when stuck: rewrite tan, cot, sec and csc in sine and cosine.
How a proof goes: start with the more complicated side, change only that side, one named step at a time, and stop when it reads exactly as the other side.
The three usual mistakes in a proof: starting from the claim and working on both sides as if solving an equation, squaring both sides, and dividing by an expression that can be 0.
Rebuild
cot t = and the flipped forms sin t = , cos t = , tan t = : no need to memorize them. A reciprocal pair works both ways, so turn the fraction you already know upside down.
Where tan, sec, csc and cot are undefined: write each in sine and cosine and look at the bottom. The functions tan t and sec t have cos t on the bottom, so they have no value where cos t = 0, at t = + kπ (90° + k · 180°). The functions csc t and cot t have sin t on the bottom, so they have no value where sin t = 0, at t = kπ (k · 180°). Here k is any integer.
1 + t = t: no need to memorize it. Where cos t ≠ 0, divide every term of t + t = 1 by t: + = , which reads t + 1 = t.
1 + t = t: no need to memorize it either. Where sin t ≠ 0, divide every term of t + t = 1 by t: + = , which reads 1 + t = t.
Rearranged forms such as t = 1 − t or t = t − 1: subtract one term from both sides of a Pythagorean identity. That is allowed because the identity is already known to be true. The claim you are proving is not known yet, so this unit's proofs do not treat it this way.
tan(−t) = −tan t: write it in sine and cosine, = = −tan t. The same move gives sec(−t) = sec t, csc(−t) = −csc t and cot(−t) = −cot t.
Multiplying by a conjugate: the conjugate of 1 − sin t is 1 + sin t, the same two terms with the sign between them switched. Multiply the top and the bottom by it, where 1 + sin t ≠ 0. The bottom becomes (1 − sin t)(1 + sin t) = 1 + sin t − sin t − t = 1 − t, which the Pythagorean identity trades for t.
Why changing one side is safe and working on both sides needs care: each step on one side swaps an expression for one with the same value, so the first line equals the last wherever every line has a value. Working on both sides starts from the claim, so it proves the claim only if every step can be run backwards, and a single one-way step can carry a false claim to a true line.
Why squaring both sides fails: −1 = 1 is false, yet squaring both sides gives 1 = 1, which is true. A move that can turn a false line into a true one is a one-way step, and a true line reached after it proves nothing about the line before it.
Why dividing by an expression that can be 0 fails: at an angle where it is 0, the division has no answer, so the chain of equal lines breaks there.
Sum and difference formulas
Know
A trig function does not split over a plus or a minus sign: cos(a + b) ≠ cos a + cos b, sin(a + b) ≠ sin a + sin b and tan(a + b) ≠ tan a + tan b in general. To break one apart, use a sum formula or a difference formula.
The cosine of a difference and of a sum: cos(a − b) = cos a cos b + sin a sin b and cos(a + b) = cos a cos b − sin a sin b.
The sine of a sum and of a difference: sin(a + b) = sin a cos b + cos a sin b and sin(a − b) = sin a cos b − cos a sin b.
Rebuild
Why cos(a − b) = cos a cos b + sin a sin b: a rope between two seats, a chord, keeps its length as the wheel turns, so measuring it in two places must give one length, and writing that down gives the formula. Understand the idea; there is no need to memorize the algebra.
cos(a + b) from cos(a − b) in ten seconds: put −b where b goes, since a − (−b) = a + b. A turn back by b ends at the mirror image of a turn forward by b, the same distance right and the opposite height, so cos(−b) = cos b and sin(−b) = −sin b, and the plus in the middle becomes a minus.
The sine formulas from the cosine ones: the sine of an angle is the cosine of what is left of a right angle, sin θ = cos(90° − θ), and cos θ = sin(90° − θ). Write sin(a + b) = cos((90° − a) − b), use the difference formula, then put −b where b goes to get sin(a − b). Understand the steps; do not memorize them.
Splitting an angle the table lacks: find two angles from the special-angle table that add or subtract to it, such as 75° = 45° + 30° and 15° = 45° − 30°. In radians, write each angle in twelfths of π first: = , = and = , so = + .
The tangent formulas: the tangent is the sine divided by the cosine, so divide the sine formula by the cosine formula, then divide every term on the top and the bottom by cos a cos b. Understand the steps; keep the results on the cheat sheet.
The sign from the quadrant: on the wheel, the cosine (how far right) is positive on the right half, the sine (how high) is positive on the top half, and the tangent is positive where those two signs agree, in quadrants I and III. This rebuilds in seconds, so there is no chart to memorize.
The size of a missing value: draw the right triangle. If sin a = , the upright side is 8 and the slant side is 17, so the flat side is = = = 15, and cos a is or −: the quadrant decides which.
Reading a formula backwards: note which functions come in which order and which sign sits in the middle, find the formula with that shape, and pack the four pieces into one. For example, sin 83° cos 23° − cos 83° sin 23° = sin(83° − 23°) = sin 60° = .
Double-angle and half-angle formulas
Know
t + t = 1, for every angle t: the fact the rest of this unit is rebuilt from.
Doubling the angle does not double the value: in general sin 2t ≠ 2 sin t and cos 2t ≠ 2 cos t. At t = 90°, sin 2t = sin 180° = 0, but 2 sin t = 2.
sin 2t = 2 sin t cos t, for every angle t. Know it well enough to spot 2 sin t cos t inside a problem and read it as sin 2t.
cos 2t = t − t, for every angle t. Its two other forms and the power-reducing formulas all grow from this line.
The signs by quadrant: sine, cosine and tangent are all positive in quadrant I; only sine is positive in quadrant II, only tangent in quadrant III, and only cosine in quadrant IV.
A square root gives a size, never a sign. In a half-angle formula, keep the sign the function has in the quadrant of , not of t.
In an equation, never divide both sides by sin t or cos t, which can be 0. Move every term to one side so the other side is 0, factor, and set each factor equal to 0, by the zero-product property: if A · B = 0, then A = 0 or B = 0.
Rebuild
The other two forms of cos 2t, 2 t − 1 and 1 − 2 t. Do not memorize them; they rebuild in ten seconds: in t − t, replace t with 1 − t to get 2 t − 1, or replace t with 1 − t to get 1 − 2 t. Then use the form that needs only the value you are given.
tan 2t = . Do not memorize it: in most problems, find sin 2t and cos 2t and divide. For the formula itself, divide the top and the bottom of by t, using tan t = . It needs tan t to exist, and it fails when tan t = 1 or tan t = −1, because then the bottom is 0.
The power-reducing formulas t = and t = . Do not memorize them; they rebuild in ten seconds: solve cos 2t = 1 − 2 t for t, and cos 2t = 2 t − 1 for t, by getting the squared term alone on one side and dividing by 2. Dividing the first result by the second gives t = .
The half-angle formulas sin = ± and cos = ±. Do not memorize them: write the power-reducing formulas with in place of t, so 2 · becomes t, then take the square root of both sides and keep one sign.
The quadrant of . Work it out each time: halve both ends of the range t lies in. If 180° < t < 270°, then 90° < < 135°, so is in quadrant II, where sine is positive and cosine is negative.
sin 2t and cos 2t from one value and a quadrant. Rebuild the method: sketch the reference triangle, label the two sides the given value supplies, find the third from + = with r > 0, give x and y the signs of the quadrant, read sin t = and cos t = , then use the double-angle formulas.
Exact values such as sin 22.5° and cos 105°. Rebuild the method: double the angle to reach a special angle (45° and 210°), put that angle's cosine into the half-angle formula, and take the sign from the quadrant of the angle you started with: quadrant I for 22.5°, quadrant II for 105°.
Equations with a double angle on 0 ≤ t < 2π. Rebuild the method: replace sin 2t with 2 sin t cos t, or cos 2t with the form that matches the other terms, move every term to one side, factor, solve each factor on the circle, list every answer in the interval, and check each one in the original equation.