Quarry School

Find zeros and axis intercepts

Subject: MathematicsLeans on: A and BLeans on: CoordinatesLeans on: Negative substitutionLeans on: Exact fractionsLeans on: Equation balance
Level 2 · BuildingAbout 14 min read12 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    On a road map, an intersection is where two routes meet.

    Rule

    Zeros: solve f(x) = 0 to find the inputs whose output is zero. Their x-intercepts are (x, 0). y-intercept: evaluate f(0) and write (0, f(0)). In a|x − h| + k with a ≠ 0: opposite signs for a and k give two x-intercepts; k = 0 gives one; the same nonzero sign gives none. The full V always has exactly one y-intercept.

    Step

    1. For zeros or x-intercepts, set the output f(x) equal to 0. This asks which inputs place the graph on the horizontal axis.

    2. Isolate the bars. Inspect B, the number on the other side, to determine whether two, one, or no inside equations are possible.

    3. Solve each possible equation to find the zero inputs. Substitute each input into the original formula to confirm output 0.

    4. List zeros as numbers or an answer set. List x-intercepts as points with y-coordinate 0.

    5. For the y-intercept, substitute x = 0 into the original formula and calculate the output. Write the point (0, f(0)).

    Question

    Find the zeros and both kinds of axis intercepts of f(x) = |4x + 1| − 7.

    Answer

    Zeros: x = −2 and x = 32
    Zero set: {−2, 32}
    x-intercepts: (−2, 0) and (32, 0)
    y-intercept: (0, −6)

    Trap

    Substituting x = 0 when asked for zeros. That finds the y-intercept. For zeros set the output to 0 and leave x unknown.

    Strategy

    1. Read whether the question asks for inputs, points, or a count of crossings.

    2. For zeros or horizontal intercepts, require output 0, isolate the bars, and solve the possible inside equations.

    3. For the vertical intercept, use input 0 and evaluate the original formula.

    4. For a crossing count without graphing, inspect the signs of a and k in a|x − h| + k, or inspect B after isolation.

    Term

    absolute value

    Definition

    The absolute value of a number is its distance from zero. It keeps the size without the direction, so it is never negative.

    Term

    distance

    Definition

    Distance tells how far apart two places or numbers are. On a number line, the distance from A to B is |A − B|.

    Term

    input

    Definition

    An input is a value supplied to a function. On its graph, the input is the horizontal coordinate x.

    Term

    output

    Definition

    An output is the value a function returns for an input. On its graph, the output is the vertical coordinate y = f(x).

    Term

    graph

    Definition

    A graph is a picture of input-output pairs. Each point (x, y) shows the output y that belongs to the input x.

    Term

    vertex

    Definition

    For an absolute value V, the vertex is its corner point. In a|x − h| + k with a ≠ 0, it is (h, k).

    Term

    solution

    Definition

    A solution is an input value that makes the original equation or inequality true. Always check it in the original statement.

    Term

    zero

    Definition

    A zero of a function is an input where its output is 0. On the graph, that input locates an x-intercept.

    Term

    x-intercept

    Definition

    An x-intercept is a graph point on the x-axis, where y = 0. Its x-coordinate is a zero of the function.

    Term

    y-intercept

    Definition

    A y-intercept is a graph point on the y-axis, where x = 0. Evaluate the function at input zero to find it.

    Term

    interval

    Definition

    An interval is one connected stretch of the number line. It contains every number between its ends, with endpoints included or excluded as stated.

    Term

    set-builder notation

    Definition

    Set-builder notation names a set by a condition. In {x : condition} or {x | condition}, the separator means such that; here x is real.

    Term

    x-axis

    Definition

    The x-axis is the horizontal coordinate line. Its points have y = 0, and it records the inputs of a function graph.

    Term

    y-axis

    Definition

    The y-axis is the vertical coordinate line. Its points have x = 0, and it records the outputs of a function graph.

    Term

    horizontal axis

    Definition

    The horizontal axis is the left-to-right coordinate line, also called the x-axis. Inputs are read along it.

    Term

    vertical axis

    Definition

    The vertical axis is the down-to-up coordinate line, also called the y-axis. Outputs are read along it.

    Term

    horizontal intercept

    Definition

    A horizontal intercept is a point where a graph meets the horizontal axis. It is an x-intercept, so the output is 0 there.

    Term

    vertical intercept

    Definition

    A vertical intercept is a point where a graph meets the vertical axis. It is a y-intercept, so the input is 0 there.

    Term

    isolate

    Definition

    To isolate an expression means to get it alone on one side by undoing outside operations. Preserve the equation or inequality while doing so.

    Term

    no solution

    Definition

    No solution means no allowed input makes the statement true. An absolute value alone cannot equal a negative number because distance is never negative.

    Term

    opposite

    Definition

    The opposite of a number is equally far from zero on the other side. The opposite of 0 is 0.

    1 In plain words

    On a road map, an intersection is where two routes meet. On a graph, an x-intercept, also called a horizontal intercept, is where the graph meets the x-axis, the horizontal line at height zero. A zero is the input that makes that happen. A y-intercept, or vertical intercept, is where the graph meets the y-axis, the vertical line with horizontal position zero. To find zeros, ask for output zero and solve for the unknown input. To find the y-intercept, the input is already zero, so calculate its output. For distance from a bus stop, the zero tells you the time you reach the stop. That is why this input can matter.

    2 Picture it

    −23/2−6−22−8−44−23/2−6−3−2−112−8−44
    y=4|x+0.25|−7.
    −4−224246
    An upward V above zero has no x-intercepts.
    (0, 0)−4−22424
    An upward V with corner height zero has one x-intercept.
    (−3, 0)(3, 0)−4−224−4−22
    An upward V with corner below zero has two x-intercepts.
    (−2, 0)(2, 0)−4−224−22
    A downward V with corner above zero has two x-intercepts.
    −4−224−6−4−2
    A downward V with corner below zero has no x-intercepts.

    Reminder

    Reminder: A and B, Coordinates, Negative substitution, Exact fractions, Equation balance
    • A and B. In |4x + 1| = 7, A names the whole inside 4x + 1 and B is 7. Solve A = 7 or A = −7.
    • Coordinates. A point (x, y) lists input first and output second. (2, 0) is on the x-axis; (0, 2) is on the y-axis.
    • Negative substitution. For x = −2, write 4(−2) + 1 = −8 + 1 = −7 before taking absolute value.
    • Exact fractions. 64 = 32 because dividing top and bottom by 2 keeps the same number.
    • Equation balance. Dividing −3u = −6 by −3 gives u = 2. Equality stays equality.

    3 Why

    For a|x − h| + k with a ≠ 0, zero height requires a|x − h| = −k, then |x − h| = −k ÷ a. Opposite signs for a and k make that distance positive, giving two crossings. If k = 0, the distance is zero, giving one. Matching nonzero signs make it negative, giving none. Every real input works in the formula, including zero, so there is always one y-intercept. A zero is a number, such as 2. Its x-intercept is the point (2, 0). Distinguishing the number from the point keeps your answer in the requested form.

    4 The rule

    Zeros: solve f(x)=0 to find the inputs whose output is zero.

    Their x-intercepts are (x, 0). y-intercept: evaluate f(0) and write (0, f(0)). In a|x−h|+k with a≠0: opposite signs for a and k give two x-intercepts; k=0 gives one; the same nonzero sign gives none. The full V always has exactly one y-intercept.

    The same idea, five ways

    Say it

    a zero is an input that gives output zero. An x-intercept is its point on the horizontal axis. The y-intercept is the point at input zero.

    Write it

    Finding an x-intercept means finding where the graph reaches height zero; finding a y-intercept means finding its height directly over input zero.

    In math
    • Zero: f(x) = 0
    • x-intercept: (x, 0)
    • y-intercept: (0, f(0))
    • For f(x) = |4x + 1| − 7, zero set {−2, 32}
    • x-intercepts: (−2, 0) and (32, 0)
    • y-intercept: (0, −6)
    Like

    Find where a road meets ground level, or where it crosses one fixed road running north and south. Those are different map questions.

    See it
    −23/2−6−22−8−44
    The same picture again: y = 4|x + 0.25| − 7.

    The same idea, other ways

    As ground level

    Every point on the horizontal axis has height zero. A zero input is where your road reaches that height. A bus-stop distance |t − 5| has zero t = 5 because that is the minute you reach the stop.

    (5, 0)246810246
    The distance reaches zero at time 5, when you are at the stop.
    As a table search

    For f(x) = |4x + 1| − 7, look for zero in the output row. The column under −2 and the column under 32 have output 0, so those inputs are zeros. The column under 0 has output −6, giving the y-intercept (0, −6).

    input xoutput f(x)−200−63/20↑ solve: output given, read every input above it
    The two zero outputs point to zero inputs −2 and 32.
    Without drawing

    In 2|x − 5| − 6, a = 2 is positive and k = −6 is negative, so the lowest point is below zero and both arms rise through zero. In −2|x + 6| − 1, both a and k are negative, so its highest point is below zero and no arm reaches zero.

    Opposite signs: two crossings

    k = 0: one crossing

    Same nonzero sign: no crossing

    GraphPosition relative to height 0Number of x-intercepts
    |x| + 2Entirely above0
    |x|Corner at zero1
    |x|−3Corner below, arms rise above2
    −|x|+2Corner above, arms drop below2
    −|x|−1Entirely below0

    Part 1: Horizontal intercepts

    Look for the inputs where the road reaches ground level. Each such input is a zero.

    • x-intercept and horizontal intercept mean the same point.
    • The point has coordinates (x, 0).
    (−1, 0)(1, 0)−22−2−1123
    y=|x|−1.

    Worked example

    Two ground-level positions

    Find the x-intercepts of |x| − 1.

    What it asks. Find the points where this V reaches height zero.

    Show the steps and the answer

    The plan. Set the output equal to zero, isolate the bars, solve both inside cases, and attach y-coordinate 0.

    (−1, 0)(1, 0)−22−2−1123
    The same picture again: y = |x| − 1.
    1. Plan. Set the output equal to zero, isolate the bars, solve both inside cases, and attach y-coordinate 0.
    2. The input is unknown.
    3. The intercept's output is fixed at zero.
    1. Set the output equal to zero: |x|−1=0.This asks which inputs place the graph on the horizontal axis.
    2. Add 1 to both sides: |x|=1.This isolates the distance and reveals positive B = 1.
    3. Write x=−1 or x=1, then check |−1|−1=0 and |1|−1=0.Both inside values have distance 1, and both inputs give zero in the original formula.
    4. Write (−1,0) and (1, 0).An intercept is a point, so include its output coordinate 0.
    Answer
    • Zero inputs: x = −1 and x = 1
    • Zero set: {−1, 1}
    • x-intercepts: (−1, 0) and (1, 0)
    Double-check Each gives 1 − 1 = 0.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Report x = 0 as the zero of |x| − 1.
    At input 0 the output is |0| − 1 = −1, not zero.
    ✓ Instead: Solve |x| − 1 = 0 to get zero inputs −1 and 1. Their intercept points are (−1, 0) and (1, 0).

    Tips and tricks

    • Write y-coordinate 0 in every x-intercept point.

    Part 2: Vertical intercept

    Stand on the vertical axis, where the horizontal address is zero. Read the height of the graph there.

    • y-intercept and vertical intercept mean the same point.
    • The point has coordinates (0, f(0)).
    (0, 3)−224246
    y=|x−2|+1.

    Worked example

    The vertical-axis height

    Find the y-intercept of |x − 2| + 1.

    What it asks. Find the graph point whose horizontal input coordinate is zero.

    Show the steps and the answer

    The plan. Put input zero into the original formula, compute the output, and write the two coordinates.

    (0, 3)−224246
    The same picture again: y = |x − 2| + 1.
    1. Plan. Put input zero into the original formula, compute the output, and write the two coordinates.
    2. Every point on the y-axis has x = 0.
    3. There is no equation to solve for x here; x is already given.
    1. Use input 0: f(0)=|0−2|+1.This finds the height over the vertical axis.
    2. Compute 0−2=−2, then |−2|=2.Evaluate the entire inside before taking its distance.
    3. Add 1: f(0)=2+1=3. Write (0, 3).The output is 3 at input 0, and an intercept answer is a point.
    Answer
    y-intercept: (0, 3).
    Double-check The vertex is (2, 1), and moving two units left raises the height by 2 to 3.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Set |x − 2| + 1 = 0 to find its y-intercept.
    That searches for output zero and therefore asks for x-intercepts. It does not force input zero.
    ✓ Instead: Use x = 0: |0 − 2| + 1 = 3, so the y-intercept is (0, 3).

    Tips and tricks

    • Write x = 0 before calculating a y-intercept so the two intercept tasks stay distinct.

    Part 3: Count x-intercepts without graphing

    Imagine the corner of a V as a ramp's lowest or highest landing. Whether that landing lies above or below ground, and whether the ramps rise or fall away from it, determines how many times the road can reach ground level.

    • For a|x − h| + k with a ≠ 0, a sets opening direction and k sets corner height.
    • a and k with opposite signs give two x-intercepts. k = 0 gives one. Matching nonzero signs give none.
    • Algebra checks the same count: solving output 0 gives a distance −k ÷ a. Positive gives two, zero gives one, negative gives none.
    (2, 0)(8, 0)246810−6−4−224
    Opposite signs, a = 2 and k = −6, place two crossings around a corner below ground.

    Worked example

    A positive a and negative corner height

    Without graphing, decide how many x-intercepts f(x) = 2|x − 5| − 6 has. Then find them.

    What it asks. Count the graph's zero-height points from its formula, then find their exact coordinates.

    Show the steps and the answer

    The plan. Compare a and k, then solve output zero and check the two inputs.

    (2, 0)(8, 0)246810−6−4−224
    The algebra finds the two zero-height points shown.
    1. Plan. Compare a and k, then solve output zero and check the two inputs.
    2. a = 2 and k = −6 have opposite signs.
    3. The required distance after isolation is 3.
    1. Read a=2>0 and k=−6<0. There are two x-intercepts.The corner is below zero, and the two arms rise without stopping, so each arm crosses zero once.
    2. Set the output to zero: 2|x−5|−6=0.This asks for the inputs where the graph reaches the horizontal axis.
    3. Add 6 to both sides: 2|x−5|=6.This removes the outside subtraction while keeping the two sides equal.
    4. Divide both sides by 2: |x−5|=3.This isolates the distance and reveals positive B = 3.
    5. Write x−5=3 or x−5=−3.Both whole inside values have absolute value 3.
    6. Add 5 in each equation: x=3+5=8 or x=−3+5=2.This finds the two zero inputs. Check them in the original formula before writing the intercept points.
    Answer
    • Number of x-intercepts: 2
    • Zeros: x = 2 and x = 8
    • Zero set: {2, 8}
    • x-intercepts: (2, 0) and (8, 0)
    Double-check f(2) = 2|2 − 5| − 6 = 2 × 3 − 6 = 0. f(8) = 2|8 − 5| − 6 = 0. Both inputs lie three units from center 5, as the distance equation requires.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: For −2|x + 6| − 1, assume a negative a guarantees two crossings.
    Its corner height is already −1 and its arms drop from there, so every output is negative.
    ✓ Instead: Both a and k are negative, so there are no x-intercepts.

    Tips and tricks

    • Inspect a and k together. Opening direction alone does not decide the crossing count.

    5 How

    1. For zeros or x-intercepts, set the output f(x) equal to 0. This asks which inputs place the graph on the horizontal axis.
    2. Isolate the bars. Inspect B, the number on the other side, to determine whether two, one, or no inside equations are possible.
    3. Solve each possible equation to find the zero inputs. Substitute each input into the original formula to confirm output 0.
    4. List zeros as numbers or an answer set. List x-intercepts as points with y-coordinate 0.
    5. For the y-intercept, substitute x = 0 into the original formula and calculate the output. Write the point (0, f(0)).

    Zeros, intercepts, and how many crossings

    1
    Does the question ask for the y-intercept?
    YesSubstitute x = 0, calculate f(0), and report (0, f(0)).
    NoFor zeros or x-intercepts, set f(x) = 0 and isolate the bars.
    ↓
    2
    After isolation, is B negative?
    YesNo zero inputs or x-intercepts: a distance cannot be negative.
    NoCheck whether B is zero.
    ↓
    3
    Is B zero?
    YesSet the inside equal to 0 to find the one zero input, then substitute it back.
    NoB is positive. Solve the two whole-inside equations, check both inputs, and report zero values or intercept points as requested.
    1. Read whether the question asks for inputs, points, or a count of crossings.
    2. For zeros or horizontal intercepts, require output 0, isolate the bars, and solve the possible inside equations.
    3. For the vertical intercept, use input 0 and evaluate the original formula.
    4. For a crossing count without graphing, inspect the signs of a and k in a|x − h| + k, or inspect B after isolation.

    6 Worked example

    Worked example

    Find zeros and intercepts

    OpenStax problem

    Find the zeros and both kinds of axis intercepts of f(x) = |4x + 1| − 7.

    What it asks. Zeros: the output is 0, so find every input that gives it. x-intercepts: write those zero-input points. y-intercept: the input is 0, so calculate the output.

    Show the steps and the answer

    The plan. Set the function equal to zero and solve the two inside equations. Then separately put input zero into the original function.

    −23/2−6−22−8−44
    The same picture a third time: y = 4|x + 0.25| − 7.
    1. Plan. Set the function equal to zero and solve the two inside equations. Then separately put input zero into the original function.
    2. Output zero and input zero are different instructions.
    3. Add 7 before splitting the inside.
    4. Use parentheses around a negative input during substitution.
    1. Set the output equal to 0: |4x+1|−7=0.This finds the inputs whose graph points lie on the horizontal axis.
    2. Add 7 to both sides: |4x+1|=7.This removes the outside subtraction and reveals positive B = 7.
    3. Write 4x+1=7 or 4x+1=−7.The complete inside can be either of the two numbers with absolute value 7.
    4. In the first equation subtract 1: 4x=6. Divide by 4: x=64=32.These steps find the input whose inside is 7. Dividing the fraction's top and bottom by 2 reduces it.
    5. In the second equation subtract 1: 4x=−8. Divide by 4: x=−2.These steps find the input whose inside is −7.
    6. Check both zero inputs in the original formula and write points (−2,0) and (32,0).Both substitutions give output 0, so both points are x-intercepts.
    7. For the y-intercept use input 0: f(0)=|4×0+1|−7=|1|−7=1−7=−6.Points on the vertical axis have x-coordinate 0. This calculation finds the height there.
    Answer
    • Zeros: x = −2 and x = 32
    • Zero set: {−2, 32}
    • x-intercepts: (−2, 0) and (32, 0)
    • y-intercept: (0, −6)
    Double-check f(−2) = |4(−2) + 1| − 7 = |−8 + 1| − 7 = |−7| − 7 = 0. f(32) = |4 × 32 + 1| − 7 = |6 + 1| − 7 = 0. For the corner, 4x + 1 = 0 finds where the inside vanishes: subtract 1 and divide by 4 to get x = −14. Substituting gives f(−14) = |−1 + 1| − 7 = −7. The corner is below zero and the arms rise, confirming two crossings.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 5

    One touching point

    Find all intercepts of f(x) = |x − 3|.

    What it asks. Find every point where the V meets either coordinate axis.

    Show the steps and the answer

    The plan. Require output zero for the x-intercept; put in input zero for the y-intercept.

    (3, 0)(0, 3)24624
    The corner is the one x-intercept, and input zero gives the separate y-intercept.
    1. Plan. Require output zero for the x-intercept; put in input zero for the y-intercept.
    2. A zero-distance V has one horizontal touching point.
    3. Input zero is a separate substitution.
    1. Set f(x)=0: |x−3|=0. Set the inside x−3=0.This finds where the graph has height zero. Only inside zero has distance zero.
    2. Add 3 to both sides: x=3. Check f(3)=|3−3|=0.This finds and verifies the one zero input.
    3. For the y-intercept use input 0: f(0)=|0−3|=|−3|=3.This calculates the height on the vertical axis.
    Answer
    • Zero: x = 3
    • Zero set: {3}
    • x-intercept: (3, 0)
    • y-intercept: (0, 3)
    Double-check The vertex lies at height zero, so there is exactly one horizontal touching point.

    Rung 2 of 5

    Two crossings

    Find all intercepts of f(x) = |x + 1| − 2.

    What it asks. Find all zero inputs, their horizontal-axis points, and the vertical-axis point.

    Show the steps and the answer

    The plan. Solve the zero-output equation with both inside signs, then compute the output at input zero.

    (−3, 0)(1, 0)(0, −1)−4−22−224
    Two zero inputs give two x-intercepts, while input zero gives the y-intercept below the axis.
    1. Plan. Solve the zero-output equation with both inside signs, then compute the output at input zero.
    2. Add 2 before splitting the bars.
    3. Subtract 1 to solve each inside equation.
    1. Set the output equal to zero: |x+1|−2=0. Add 2: |x+1|=2.This asks which inputs put the graph on the x-axis and isolates the required distance.
    2. Write x+1=2 or x+1=−2.The positive distance 2 has two possible whole inside values.
    3. Subtract 1 in each equation: x=2−1=1 or x=−2−1=−3.This finds both zero inputs.
    4. For the y-intercept use x = 0: f(0)=|0+1|−2=1−2=−1.This finds the graph's height on the vertical axis.
    Answer
    • Zeros: x = −3 and x = 1
    • Zero set: {−3, 1}
    • x-intercepts: (−3, 0) and (1, 0)
    • y-intercept: (0, −1)
    Double-check f(−3) = |(−3) + 1| − 2 = |−2| − 2 = 0 and f(1) = |2| − 2 = 0. The vertex (−1, −2) is below zero and the arms rise, agreeing with two crossings.

    Rung 3 of 5

    No crossing

    Find all intercepts of f(x) = 2|x − 1| + 3.

    What it asks. Determine whether the V reaches output zero, and find its output at input zero.

    Show the steps and the answer

    The plan. Set output zero and inspect the distance after isolation. Compute f(0) separately.

    (0, 5)−224246810
    The entire V stays above zero and still meets the y-axis at (0, 5).
    1. Plan. Set output zero and inspect the distance after isolation. Compute f(0) separately.
    2. A negative isolated distance cannot occur.
    3. The y-intercept still exists even if there are no x-intercepts.
    1. Set output zero: 2|x−1|+3=0. Subtract 3: 2|x−1|=−3.This asks which inputs reach the horizontal axis and removes the outside addition.
    2. Divide by 2: |x−1|=−32.This isolates the distance so its possibility can be checked.
    3. There are no zero inputs or x-intercepts: ∅.A distance cannot equal −32. Every original output is at least 3.
    4. Use x = 0 for the y-intercept: f(0)=2|0−1|+3=2×1+3=5.This calculates the height over the vertical axis, where the input is zero.
    Answer
    • Zeros: none; zero set ∅
    • x-intercepts: none
    • y-intercept: (0, 5)
    Double-check The minimum height is 3, so the entire graph stays above zero.

    Rung 4 of 5

    Reflected V and fractions

    Find all intercepts of f(x) = −3|2x + 1| + 6.

    What it asks. Find the two possible zero inputs of this downward V and the height at input zero.

    Show the steps and the answer

    The plan. Solve output zero, dividing by the negative outside multiplier, then compute the y-intercept separately.

    −3/21/2(0, 3)−22−4−2246
    This downward V crosses zero at −32 and 12 and meets the y-axis at height 3.
    1. Plan. Solve output zero, dividing by the negative outside multiplier, then compute the y-intercept separately.
    2. Dividing this equation by −3 keeps equality.
    3. Fractional zero inputs are exact.
    4. Do the absolute value before multiplying by −3.
    1. Set output zero: −3|2x+1|+6=0. Subtract 6: −3|2x+1|=−6.This finds the inputs whose graph points reach the horizontal axis.
    2. Divide both sides by −3: |2x+1|=2.This isolates the distance. Equality stays equality under negative division.
    3. Write 2x+1=2 or 2x+1=−2.B = 2 > 0 permits two whole inside values.
    4. In the first equation subtract 1: 2x=1. Divide by 2: x=12.This finds the zero input on the right.
    5. In the second equation subtract 1: 2x=−3. Divide by 2: x=−32.This finds the zero input on the left.
    6. For the y-intercept use input 0: f(0)=−3|2×0+1|+6=−3×1+6=3.This calculates the height on the vertical axis. The outside minus acts after the distance is found.
    Answer
    • Zeros: x = −32 and x = 12
    • Zero set: {−32, 12}
    • x-intercepts: (−32, 0) and (12, 0)
    • y-intercept: (0, 3)
    Double-check At −32, 2x + 1 = −3 + 1 = −2. At 12, 2x + 1 = 1 + 1 = 2. Both original outputs are −3 × 2 + 6 = 0. The corner has height 6 and the V opens down, agreeing with two crossings.

    Rung 5 of 5

    Which constant removes the crossings?

    For which real c does g(x) = −4|x + 6| + c have no x-intercepts?

    What it asks. Find every choice of the constant c that keeps the graph from reaching height zero for any input x.

    Show the steps and the answer

    The plan. Set the output equal to zero, isolate the distance, and find when the number on the other side is negative.

    −8−6−4−8−44
    Choosing c = −1 keeps the whole downward V below zero.
    (−6, 0)−8−6−4−8−44
    Choosing c = 0 creates one zero at the corner.
    (−7, 0)(−5, 0)−8−6−4−8−44
    Choosing c = 4 creates two zero-height points.
    0(−∞, 0)
    The permitted constants are every negative c, with zero excluded.
    1. Plan. Set the output equal to zero, isolate the distance, and find when the number on the other side is negative.
    2. c is a constant choosing the corner height, rather than an input x to solve for.
    3. The largest output is c because the graph opens down.
    4. Dividing by positive 4 keeps the sign of c.
    1. Require zero height: −4|x+6|+c=0.This tests whether any input can place the graph on the horizontal axis.
    2. Subtract c: −4|x+6|=−c. Divide by −4: |x+6|=c4.This isolates the distance. Its sign decides whether crossing inputs exist.
    3. No x-intercepts occur when c4<0, which is exactly c < 0.A negative distance has no solution. Since 4 is positive, c and c ÷ 4 have the same sign.
    4. Check the other choices: c=0 gives x+6=0, so x=−6; c > 0 gives two inside equations and two crossings.This shows that no zero or positive c belongs to the requested no-crossing choices.
    Answer
    • c < 0
    • Interval for c: (−∞, 0)
    • Set-builder notation: {c : c < 0}
    Double-check For c = −1, the largest output is −1 at x = −6, so no input reaches zero. For c = 0, g(−6) = 0 gives one crossing. For c = 4, g(−7) = g(−5) = −4 × 1 + 4 = 0 gives two. These checks confirm why precisely the negative choices give none.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: For f(x) = |x − 2|, say the zero is (0, 2).
    Input 0 gives output |0 − 2| = 2, so (0, 2) is the y-intercept. A zero is an input number where the output becomes zero.
    ✓ Instead: The zero is x = 2, set {2}. Its x-intercept is (2, 0).
    ✗ Not this: Assume every V has two x-intercepts because it has two arms.
    For 2|x − 1| + 3, every output is at least 3. Neither arm reaches height zero.
    ✓ Instead: Set output 0 and isolate to get |x − 1| = −32. Negative B means no x-intercepts.

    Tips and tricks

    • Zeros: output 0, solve for input. y-intercept: input 0, calculate output.
    • For a|x − h| + k with a ≠ 0, opposite signs for a and k mean two crossings. k = 0 means one. Matching nonzero signs mean none. This gives the count without graphing.
    • On an exam, answer the requested object. A zero is an x-value. An intercept is a point with two coordinates.

    7 The trap

    Substituting x = 0 when asked for zeros. That finds the y-intercept. For zeros set the output to 0 and leave x unknown.

    Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.