Quarry School

What a zero remainder means

Subject: MathematicsLeans on: What a factor isLeans on: The division algorithmLeans on: The number used in synthetic divisionLeans on: Zeros for missing termsLeans on: Factoring x² + bx + cLeans on: Multiplying signed numbersLeans on: Multiplying two binomials
Level 2 · BuildingAbout 24 min read5 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    The big picture. Use division to decide whether an expression is a factor.

    Rule

    If a division gives remainder 0, the divisor is a factor of the dividend, and dividend = divisor × quotient. If the remainder is not 0, the divisor is not a factor. For a divisor x − c, with P(x) standing for the dividend and Q(x) for the quotient: remainder 0 means P(x) = (x − c) · Q(x).

    Step

    1. Use the synthetic-division rule to test the proposed factor x − 4 of x3 + 3x2 − 18x − 40. Put 4 in the box: x = 4 makes the divisor zero, since 4 − 4 = 0. Write the complete coefficient row 1, 3, −18, −40.

    2. Use bring down, multiply, add: bring down 1, multiply 1 × 4 = 4, and add 3 + 4 = 7. This starts the quotient row one power below the cubic dividend.

    3. Repeat multiply, add: 7 × 4 = 28 and −18 + 28 = 10; then 10 × 4 = 40 and −40 + 40 = 0. Using each newest bottom number gives the bottom row 1, 7, 10, 0.

    4. Use the zero-remainder rule: the last entry is 0, so x − 4 is a factor. The other entries give quotient x2 + 7x + 10. Write x3 + 3x2 − 18x − 40 = (x − 4)(x2 + 7x + 10) because the division identity has no leftover term.

    5. Use the quadratic factoring rule: find two numbers whose product is 10 and whose sum is 7. They are 2 and 5, so x2 + 7x + 10 = (x + 2)(x + 5). Keep the original divisor to get (x − 4)(x + 2)(x + 5); every factor is linear.

    6. Check by multiplication: (x − 4)(x + 2) = x2 − 2x − 8. Then (x2 − 2x − 8)(x + 5) = x3 + 5x2 − 2x2 − 10x − 8x − 40 = x3 + 3x2 − 18x − 40. This recovers every coefficient of the original polynomial.

    Strategy

    1. Divide by the proposed factor, with zeros for missing powers.

    2. Check the remainder. If it is nonzero, the proposed factor fails.

    3. If it is zero, write the dividend as divisor × quotient.

    4. Factor each piece further where it factors, with integers unless the question says otherwise.

    5. Keep all factors, including the original divisor, and multiply back.

    Question

    Show that x − 4 is a factor of x3 + 3x2 − 18x − 40. Then factor x3 + 3x2 − 18x − 40 completely.

    Answer

    x − 4 is a factor, because the remainder is 0.
    x3 + 3x2 − 18x − 40 = (x − 4)(x + 2)(x + 5)

    Trap

    Wrong: give only the factored quotient. Right: include the divisor too, so the product rebuilds the original polynomial.

    Strategy

    1. Read c from the marked point (c, 0) on the horizontal axis.

    2. Substitute c in the given quadratic. If it is zero, another fact is needed to determine the remaining factor.

    3. Write x − c beside the given quadratic factor.

    4. Match the leading coefficient: divide the cubic's leading coefficient by the quadratic's leading coefficient for the outside multiplier.

    5. Expand to check the degree, leading coefficient and marked intercept.

    Term

    dividend

    Definition

    The thing being divided: the amount you start with. In long division it sits under the bar.

    Term

    divisor

    Definition

    The thing you divide by. It says how many groups to make, or how big each group is. It can never be zero.

    Term

    quotient

    Definition

    The main answer to a division: how many times the divisor fits into the dividend.

    Term

    remainder

    Definition

    What is left over after the divisor has been taken out as many times as it fits. For polynomials, it is 0 or its degree is lower than the degree of the divisor.

    Term

    synthetic division

    Definition

    A shortcut for dividing a polynomial by x − c. You write only the coefficients, then multiply by c and add, one column at a time.

    Term

    division algorithm

    Definition

    The fact that every division can be written as dividend = divisor × quotient + remainder, where the remainder is 0 or has lower degree than the divisor.

    1 In plain words

    The big picture. Use division to decide whether an expression is a factor. A zero remainder means the divisor fits exactly. Build on the earlier division methods, then factor the quotient further. These factors prepare you to find zeros of polynomial functions in the next unit.

    A factor makes an exact fit. Think of filling boxes with nothing left on the table. In polynomial division, a zero remainder means the divisor fits exactly: the dividend equals divisor × quotient. Those are two factors of the original polynomial. Look at the quotient next; it may split into smaller factors.

    2 Picture it

    x³ + 3x² − 18x − 40x − 4x² + 7x + 10
    Notice that a zero remainder means the divisor and the quotient are the two sides of a rectangle that the…

    Reminder

    Reminder: What a factor is, The division algorithm, The number used in synthetic division, Zeros for missing terms, Factoring x2 + bx + c, Multiplying signed numbers, Multiplying two binomials
    • What a factor is. A factor is one of the pieces multiplied together to make a product: 3 and 4 are factors of 12 because 3 × 4 = 12.
    • The division algorithm. dividend = divisor × quotient + remainder. For 17 ÷ 5: 17 = 5 × 3 + 2.
    • The number used in synthetic division. Dividing by x − c uses c. Dividing by x + 3 uses −3, because x + 3 = x − (−3).
    • Zeros for missing terms. Write a 0 for each missing power before dividing: x3 − 13x − 12 has coefficients 1, 0, −13, −12.
    • Factoring x2 + bx + c. Find two numbers that multiply to c and add to b. For x2 + 7x + 10 they are 2 and 5, so x2 + 7x + 10 = (x + 2)(x + 5).
    • Multiplying signed numbers. Same signs give a positive, different signs give a negative: (−3)(−3) = 9 and (−4)(2) = −8.
    • Multiplying two binomials. Multiply each term of the first by each term of the second, then collect like terms: (x − 3)(x + 5) = x2 + 5x − 3x − 15 = x2 + 2x − 15.

    3 Why

    The division identity is dividend = divisor × quotient + remainder. When the remainder is zero, only the product remains. That makes the divisor a factor. Conversely, a polynomial written as divisor × quotient divides with nothing left over. A nonzero remainder prevents that exact product.

    4 The rule

    If a division gives remainder 0, the divisor is a factor of the dividend, and dividend = divisor × quotient.

    If the remainder is not 0, the divisor is not a factor. For a divisor x−c, with P(x) standing for the dividend and Q(x) for the quotient: remainder 0 means P(x)=(x−c)·Q(x).

    The same idea, five ways

    Say it

    x minus c goes into the polynomial evenly. Or: x minus c divides it with nothing left over.

    Write it

    The divisor is a factor of the dividend because the remainder of the division is zero.

    In math
    • dividend = divisor × quotient + 0
    • dividend = divisor × quotient
    • P(x)=(x−c)·Q(x)
    • P(x)x−c = Q(x) for x ≠ c, with remainder 0
    Like

    24 eggs fill 4 cartons of 6 with no egg left on the table, so 24 = 6 × 4.

    See it

    remainder = 0

    dividend = divisor × quotient

    the divisor is a factor

    remainder ≠ 0: not a factor

    The same idea, other ways

    As a picture

    Draw a rectangle whose area is the dividend. Make one side the divisor. If the remainder is 0, the other side is the quotient and the rectangle is filled exactly, with no extra strip hanging off the edge. Side times side equals area, so divisor × quotient = dividend.

    x³ + 3x² − 18x − 40x − 4x² + 7x + 10
    Notice that the two sides, x − 4 and x2 + 7x + 10, multiply to fill the whole area with nothing left over.
    With small numbers

    12 ÷ 3 = 4 with remainder 0, so 12 = 3 × 4 and 3 is a factor of 12. 14 ÷ 3 = 4 with remainder 2, so 14 = 3 × 4 + 2. The extra + 2 is what stops 3 from being a factor of 14. A polynomial division reads the same way: remainder 0 means a clean multiplication, any other remainder means a multiplication plus an extra piece.

    1234
    Notice that 3 rows of 4 make exactly 12, which is why 3 is a factor of 12.
    As a story

    A baker packs rolls into bags of 6. If the last bag comes out full and the tray is empty, the number of rolls is 6 times the number of bags. If rolls are still on the tray, it is not. The rolls on the tray are the remainder. An empty tray is a remainder of 0, and it tells you the bag size is a factor of the total.

    Why it must be true

    Start from the division algorithm: dividend = divisor × quotient + remainder. Adding 0 changes nothing, so with remainder 0 the line reads dividend = divisor × quotient. A factor is one of the pieces in a multiplication. The divisor is one of the pieces in this multiplication. So the divisor is a factor.

    As a rule of thumb

    In synthetic division, look at the last number of the bottom row before anything else. If it is 0, the divisor x − c is a factor, and the other numbers in the bottom row are the coefficients of the other factor. If it is anything else, x − c is not a factor.

    DivisionRemainderWhat it tells youHow to write the dividend
    12 ÷ 303 is a factor of 1212 = 3 × 4
    14 ÷ 323 is not a factor of 1414 = 3 × 4 + 2
    (x2+2x−15)÷(x−3)0x − 3 is a factorx2+2x−15=(x−3)(x+5)
    (x2+2x−13)÷(x−3)2x − 3 is not a factorx2+2x−13=(x−3)(x+5)+2

    Part 1: The graph gives a factor

    An x-intercept is a point on the horizontal axis, where the output is zero. Think of that axis as sea level. If its input is c, then x − c is a factor. With a given quadratic factor and the cubic's leading coefficient, you can recover the remaining linear factor.

    • Why: P(x) = (x − c)Q(x) + R gives P(c) = R. A point (c, 0) means remainder zero.
    • Use this method when the given quadratic is nonzero at c. If it also vanishes there, this point alone does not determine the remaining factor.
    (4, 0)−2246−204−102102204
    y=2x3−128.

    What it asks: write a cubic in factored form from its graph

    1. Read c from the marked point (c, 0) on the horizontal axis.
    2. Substitute c in the given quadratic. If it is zero, another fact is needed to determine the remaining factor.
    3. Write x − c beside the given quadratic factor.
    4. Match the leading coefficient: divide the cubic's leading coefficient by the quadratic's leading coefficient for the outside multiplier.
    5. Expand to check the degree, leading coefficient and marked intercept.

    Worked example

    Read a factor from a graph

    The graph shows a cubic with leading coefficient 2. One factor is x2 + 4x + 16. Use the marked x-intercept to write the cubic in factored form.

    What it asks. Find the missing linear factor and the multiplier for the cubic.

    (4, 0)−2246−204−102102204
    The same picture again: y = 2x3 − 128.
    Show the steps and the answer

    The plan. Read the marked x-intercept, pair its factor with the given quadratic, then match the leading coefficient.

    1. Plan. Read the marked x-intercept, pair its factor with the given quadratic, then match the leading coefficient.
    2. At an x-intercept the output is zero. An input c gives the factor x − c.
    3. The leading coefficients of the factors must multiply to the given leading coefficient.
    1. Read the marked point (4, 0). The input is 4, so x−(4) is a factor.On the horizontal axis the output is zero. In P(c) = (c − c)Q(c) + R, only R remains, so R = 0.
    2. The given quadratic x2+4x+16 starts with 1x2. Multiplying it by x−4 would start with 1x3. Multiply the product by 2 to obtain the required 2x3.The degrees 2 and 1 add to 3. The leading coefficients must multiply to the given cubic coefficient.
    3. Write 2(x−4)(x2+4x+16).Keep the given quadratic and the linear factor together, with the required multiplier.
    Answer
    • 2(x−4)(x2+4x+16)
    • Expanded check: 2x3 − 128
    • The factors may be written in any order.
    Double-check Expand the two polynomial factors: x3 + 4x2 + 16x − 4x2 − 16x − 64 = x3 − 64. Multiply by 2 to get 2x3 − 128. At x = 4 this gives 128 − 128 = 0. Dividing 2x3 − 128 by x − 4 gives bottom row 2, 8, 32, 0, so the quotient is 2(x2 + 4x + 16).

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Use x + c for an intercept at c, or use a nonzero y-intercept as a root.
    A factor x − c must become zero at the input c.
    ✓ Instead: Read the horizontal coordinate of a point whose output is zero, then write x − c.

    Tips and tricks

    • Trick: multiply the outside multiplier by the factors' constant terms. The product is the graph's y-intercept.

    5 How

    1. Use the synthetic-division rule to test the proposed factor x − 4 of x3 + 3x2 − 18x − 40. Put 4 in the box: x = 4 makes the divisor zero, since 4 − 4 = 0. Write the complete coefficient row 1, 3, −18, −40.
    2. Use bring down, multiply, add: bring down 1, multiply 1 × 4 = 4, and add 3 + 4 = 7. This starts the quotient row one power below the cubic dividend.
    3. Repeat multiply, add: 7 × 4 = 28 and −18 + 28 = 10; then 10 × 4 = 40 and −40 + 40 = 0. Using each newest bottom number gives the bottom row 1, 7, 10, 0.
    4. Use the zero-remainder rule: the last entry is 0, so x − 4 is a factor. The other entries give quotient x2 + 7x + 10. Write x3 + 3x2 − 18x − 40 = (x − 4)(x2 + 7x + 10) because the division identity has no leftover term.
    5. Use the quadratic factoring rule: find two numbers whose product is 10 and whose sum is 7. They are 2 and 5, so x2 + 7x + 10 = (x + 2)(x + 5). Keep the original divisor to get (x − 4)(x + 2)(x + 5); every factor is linear.
    6. Check by multiplication: (x − 4)(x + 2) = x2 − 2x − 8. Then (x2 − 2x − 8)(x + 5) = x3 + 5x2 − 2x2 − 10x − 8x − 40 = x3 + 3x2 − 18x − 40. This recovers every coefficient of the original polynomial.

    What it asks: test a factor and finish factoring

    1. Divide by the proposed factor, with zeros for missing powers.
    2. Check the remainder. If it is nonzero, the proposed factor fails.
    3. If it is zero, write the dividend as divisor × quotient.
    4. Factor each piece further where it factors, with integers unless the question says otherwise.
    5. Keep all factors, including the original divisor, and multiply back.

    6 Worked example

    Worked example

    Show a factor, then factor completely

    Show that x − 4 is a factor of x3 + 3x2 − 18x − 40. Then factor x3 + 3x2 − 18x − 40 completely.

    What it asks. Confirm the proposed factor and factor the whole polynomial.

    Show the steps and the answer

    The plan. Divide by x − 4, check for remainder zero, then factor the quadratic quotient and multiply all factors back.

    Dividing by x − 4: use c = 4

    Top row: 1 3 −18 −40

    Middle row: 4 28 40

    Bottom row: 1 7 10 0

    Quotient: x2 + 7x + 10

    Remainder: 0, so x − 4 is a factor

    1. Plan. Divide by x − 4, check for remainder zero, then factor the quadratic quotient and multiply all factors back.
    1. Say what the question asks. Show that x−4 is a factor means: divide by x−4 and get remainder 0. Factor completely means: write the polynomial as a product of pieces that cannot be split again.Knowing the target tells you when to stop: a remainder of 0 for the first part, no more splitting for the second.
    2. Choose the method and the number. The divisor x−4 has the form x−c with c=4, so use synthetic division with 4.Synthetic division is built for a divisor of the form x − c. The number 4 is the one that makes the divisor equal 0: 4 − 4 = 0.
    3. Write the coefficients of the dividend in descending powers as the top row: 1, 3, −18,−40.The dividend has an x3 term, an x2 term, an x term and a constant, so no power is missing and no 0 is needed.
    4. Bring down the 1. Multiply 1 × 4 = 4, write it under the 3, and add: 3+4=7.Each new bottom number is the top number plus 4 times the bottom number before it.
    5. Multiply 7 × 4 = 28, write it under the −18, and add: −18+28=10.Same move, one column to the right.
    6. Multiply 10×4=40, write it under the −40, and add: −40+40=0. The bottom row is 1, 7, 10, 0.The last number of the bottom row is the remainder, and here it is 0.
    7. Read the bottom row: the remainder is 0 and the quotient is x2+7x+10.The numbers before the last one are the coefficients of the quotient, and the quotient starts one degree below the dividend, so x3 drops to x2.
    8. Write the multiplication: x3+3x2−18x−40=(x−4)(x2+7x+10).The division algorithm says dividend = divisor × quotient + remainder, and the remainder is 0. This shows x − 4 is a factor.
    9. Factor the quotient x2+7x+10. Look for two numbers that multiply to 10 and add to 7. They are 2 and 5, so x2+7x+10=(x+2)(x+5).2 × 5 = 10 and 2 + 5 = 7, which match the last number and the middle number of the quotient.
    10. Put every piece in one product: (x−4)(x+2)(x+5).The divisor stays in the answer because it is one of the factors. Each piece now has degree 1, so nothing can be split again.
    Answer
    • x − 4 is a factor, because the remainder is 0.
    • x3+3x2−18x−40=(x−4)(x+2)(x+5)
    Double-check Multiply back. (x − 4)(x + 2) = x2 + 2x − 4x − 8 = x2 − 2x − 8. Then (x2 − 2x − 8)(x + 5) = x3 + 5x2 − 2x2 − 10x − 8x − 40 = x3 + 3x2 − 18x − 40, the original dividend. A number test agrees: at x = 1 the original is 1 + 3 − 18 − 40 = −54, and the factored form is (−3)(3)(6) = −54.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 8

    Whole numbers first

    Is 7 a factor of 91? If it is, write 91 as a multiplication.

    What it asks. Use the remainder to decide whether the proposed divisor is a factor.

    Show the steps and the answer

    The plan. Divide the whole number and look for remainder zero. Check by multiplication.

    91713
    Notice that 7 rows of 13 fill 91 exactly, with nothing left over.
    1. Plan. Divide the whole number and look for remainder zero. Check by multiplication.
    1. Say what the question asks: divide 91 by 7 and see whether anything is left over.A factor is a number that divides with remainder 0.
    2. Divide the tens. 7 goes into 9 one time. 1×7=7, and 9−7=2.Long division works from the left digit.
    3. Bring down the 1 to make 21. 7 goes into 21 three times. 3×7=21, and 21−21=0.The 2 left from the tens joins the next digit.
    4. Read the result: quotient 13, remainder 0. So 91=7×13.dividend = divisor × quotient + remainder, and the remainder is 0.
    Answer
    • Yes, 7 is a factor of 91.
    • 91 = 7 × 13
    Double-check Multiply back: 7 × 13 = 7 × 10 + 7 × 3 = 70 + 21 = 91.

    Rung 2 of 8

    A quadratic and a divisor x − c

    Is x − 3 a factor of x2 + 2x − 15? If it is, write x2 + 2x − 15 in factored form.

    What it asks. Use the remainder to decide whether the proposed divisor is a factor.

    Show the steps and the answer

    The plan. Use 3 in the box. A zero remainder lets you write divisor × quotient.

    Dividing by x − 3: use c = 3

    Top row: 1 2 −15

    Middle row: 3 15

    Bottom row: 1 5 0

    Quotient: x + 5

    Remainder: 0

    1. Plan. Use 3 in the box. A zero remainder lets you write divisor × quotient.
    1. Say what the question asks: divide x2+2x−15 by x−3 and see whether the remainder is 0.Remainder 0 is the test for a factor.
    2. The divisor is x−3, so use synthetic division with c=3. The top row is 1, 2, −15.3 is the number that makes x − 3 equal 0: 3 − 3 = 0. No power of x is missing in the dividend.
    3. Bring down the 1. Multiply 1 × 3 = 3 and add: 2+3=5.Each bottom number is the top number plus 3 times the bottom number before it.
    4. Multiply 5×3=15 and add: −15+15=0. The bottom row is 1, 5, 0.The last bottom number is the remainder.
    5. Read the result: remainder 0, quotient x+5. Write x2+2x−15=(x−3)(x+5).With remainder 0, dividend = divisor × quotient. The quotient starts one degree below x2, so 1, 5 means x + 5.
    Answer
    • Yes, x − 3 is a factor.
    • x2+2x−15=(x−3)(x+5)
    Double-check Multiply back: (x − 3)(x + 5) = x2 + 5x − 3x − 15 = x2 + 2x − 15.

    Rung 3 of 8

    The remainder is not zero

    Is x − 2 a factor of x3 − 4x2 + x + 5?

    What it asks. Use the remainder to decide whether the proposed divisor is a factor.

    Show the steps and the answer

    The plan. Use 2 in the box and read the remainder before deciding whether the divisor is a factor.

    Dividing by x − 2: use c = 2

    Top row: 1 −4 1 5

    Middle row: 2 −4 −6

    Bottom row: 1 −2 −3 −1

    Remainder: −1, not 0

    x − 2 is not a factor

    1. Plan. Use 2 in the box and read the remainder before deciding whether the divisor is a factor.
    1. Say what the question asks: divide by x−2 and see whether the remainder is 0.Only a remainder of exactly 0 means factor.
    2. Use synthetic division with c=2. The top row is 1, −4, 1, 5.The divisor is x − 2, and every power from x3 down to the constant is present.
    3. Bring down the 1. Multiply 1 × 2 = 2 and add: −4+2=−2.Top number plus 2 times the bottom number before it.
    4. Multiply −2 × 2 = −4 and add: 1+(−4)=−3.Same move, next column. A negative times a positive is negative.
    5. Multiply −3×2=−6 and add: 5+(−6)=−1. The bottom row is 1, −2,−3,−1.The last bottom number is the remainder.
    6. Read the result: the remainder is −1, not 0. So x−2 is not a factor. The honest statement is x3−4x2+x+5=(x−2)(x2−2x−3)−1.The division algorithm still holds, but the extra − 1 means the dividend is not a plain multiplication by x − 2.
    Answer
    • No. The remainder is −1, so x − 2 is not a factor.
    • x3−4x2+x+5=(x−2)(x2−2x−3)−1
    Double-check Multiply and add back: (x − 2)(x2 − 2x − 3) = x3 − 2x2 − 3x − 2x2 + 4x + 6 = x3 − 4x2 + x + 6. Subtract 1 to get x3 − 4x2 + x + 5, the original dividend. Also, putting x = 2 into the dividend gives 8 − 16 + 2 + 5 = −1, the same number as the remainder.

    Rung 4 of 8

    A divisor x + c and a missing term

    Show that x + 3 is a factor of x3 − 13x − 12. Then factor x3 − 13x − 12 completely.

    What it asks. Confirm the proposed factor and factor completely.

    Show the steps and the answer

    The plan. Use −3 in the box with a zero for the missing x2 term. Factor the quadratic quotient.

    Dividing by x + 3: use c = −3

    Top row: 1 0 −13 −12

    Middle row: −3 9 12

    Bottom row: 1 −3 −4 0

    Quotient: x2 − 3x − 4

    Remainder: 0

    1. Plan. Use −3 in the box with a zero for the missing x2 term. Factor the quadratic quotient.
    1. Say what the question asks: divide by x+3, get remainder 0, then keep splitting until no piece can be split again.Remainder 0 proves the factor, and completely means no piece is left that still factors.
    2. Find the number for synthetic division. Write x+3 as x−(−3), so c=−3.Synthetic division uses the number that makes the divisor 0, and −3 + 3 = 0.
    3. Write the top row with a 0 for the missing x2 term: 1, 0, −13,−12.x3 − 13x − 12 is x3 + 0x2 − 13x − 12. Without the 0, every later number lands in the wrong column.
    4. Bring down the 1. Multiply 1 × (−3) = −3 and add: 0+(−3)=−3.Top number plus −3 times the bottom number before it.
    5. Multiply −3 × (−3) = 9 and add: −13+9=−4.A negative times a negative is positive.
    6. Multiply −4×(−3)=12 and add: −12+12=0. The bottom row is 1, −3,−4, 0.The last bottom number is the remainder, and it is 0, so x + 3 is a factor.
    7. Write x3−13x−12=(x+3)(x2−3x−4).Remainder 0 gives dividend = divisor × quotient, and 1, −3, −4 are the coefficients of the quotient starting at x2.
    8. Factor x2−3x−4. Two numbers that multiply to −4 and add to −3 are −4 and 1. So x2−3x−4=(x−4)(x+1).−4 × 1 = −4 and −4 + 1 = −3.
    9. Write every factor: (x+3)(x−4)(x+1).The divisor x + 3 is a factor and stays in the answer.
    Answer
    • x + 3 is a factor, because the remainder is 0.
    • x3−13x−12=(x+3)(x−4)(x+1)
    Double-check Multiply back: (x + 3)(x − 4) = x2 − 4x + 3x − 12 = x2 − x − 12. Then (x2 − x − 12)(x + 1) = x3 + x2 − x2 − x − 12x − 12 = x3 − 13x − 12. Number test at x = 2: the original is 8 − 26 − 12 = −30, and the factored form is (5)(−2)(3) = −30.

    Rung 5 of 8

    The quotient does not factor again

    Show that x − 1 is a factor of x3 + 2x − 3. Then factor x3 + 2x − 3 as far as it will go using integers.

    What it asks. Confirm the proposed factor and factor as far as integers allow.

    Show the steps and the answer

    The plan. Use 1 in the box. Check whether any integer factor pair gives the quadratic quotient.

    Dividing by x − 1: use c = 1

    Top row: 1 0 2 −3

    Middle row: 1 1 3

    Bottom row: 1 1 3 0

    Quotient: x2 + x + 3

    Remainder: 0

    1. Plan. Use 1 in the box. Check whether any integer factor pair gives the quadratic quotient.
    1. Say what the question asks: divide by x−1, get remainder 0, then split the quotient if it can be split.Remainder 0 proves the factor. The quotient may or may not factor again.
    2. Use synthetic division with c=1. Write a 0 for the missing x2 term: the top row is 1, 0, 2, −3.x3 + 2x − 3 is x3 + 0x2 + 2x − 3.
    3. Bring down the 1. Multiply 1 × 1 = 1 and add: 0+1=1.Top number plus 1 times the bottom number before it.
    4. Multiply 1 × 1 = 1 and add: 2+1=3.Same move, next column.
    5. Multiply 3×1=3 and add: −3+3=0. The bottom row is 1, 1, 3, 0.The remainder is 0, so x − 1 is a factor.
    6. Write x3+2x−3=(x−1)(x2+x+3).Remainder 0 gives dividend = divisor × quotient.
    7. Try to factor x2+x+3. You need two integers that multiply to 3 and add to 1. The only pairs that multiply to 3 are 1 and 3, which add to 4, and −1 and −3, which add to −4.Neither pair adds to 1, so no integers work.
    8. Stop. The answer is (x−1)(x2+x+3).A quotient that does not factor is left as it is. The zero remainder still gave one true factor.
    Answer
    • x − 1 is a factor, because the remainder is 0.
    • x3 + 2x − 3 = (x − 1)(x2 + x + 3), and x2 + x + 3 does not factor with integers.
    Double-check Multiply back: (x − 1)(x2 + x + 3) = x3 + x2 + 3x − x2 − x − 3 = x3 + 2x − 3. Number test at x = 2: the original is 8 + 4 − 3 = 9, and the factored form is (1)(4 + 2 + 3) = 9.

    Rung 6 of 8

    A divisor of degree two

    Show that x2 + 1 is a factor of x4 + 2x3 − 2x2 + 2x − 3. Then factor x4 + 2x3 − 2x2 + 2x − 3 completely.

    What it asks. Confirm the proposed factor and factor completely.

    Show the steps and the answer

    The plan. Use long division by the quadratic. If the remainder is zero, factor the quotient and keep the divisor.

    x⁴ + 2x³ − 2x² + 2x − 3x² + 1x² + 2x − 3
    Notice that the divisor x2 + 1 and the quotient x2 + 2x − 3 are the two sides.
    1. Plan. Use long division by the quadratic. If the remainder is zero, factor the quotient and keep the divisor.
    1. Say what the question asks: divide by x2+1, get remainder 0, then split the quotient as far as it goes.The zero remainder test works for any divisor, not only x − c.
    2. Choose long division, and write the divisor as x2+0x+1.This synthetic table handles linear divisors; a quadratic needs long division. The 0x keeps the columns lined up.
    3. Match leading terms: x4÷x2=x2. Multiply x2(x2+0x+1)=x4+0x3+x2. Subtract from x4+2x3−2x2 to get 2x3−3x2. Bring down 2x: 2x3−3x2+2x.x2 is the piece of the quotient that removes the x4 term. Note −2x2 − x2 = −3x2.
    4. Match leading terms: 2x3÷x2=2x. Multiply 2x(x2+0x+1)=2x3+0x2+2x. Subtract to get −3x2+0x. Bring down −3: −3x2+0x−3.2x removes the x3 term, and 2x − 2x = 0x.
    5. Match leading terms: −3x2÷x2=−3. Multiply −3(x2+0x+1)=−3x2+0x−3. Subtract to get 0.Nothing is left, so the remainder is 0 and x2 + 1 is a factor.
    6. Write x4+2x3−2x2+2x−3=(x2+1)(x2+2x−3).The quotient is x2 + 2x − 3 and the remainder is 0, so dividend = divisor × quotient.
    7. Factor x2+2x−3. Two numbers that multiply to −3 and add to 2 are 3 and −1. So x2+2x−3=(x+3)(x−1).3 × (−1) = −3 and 3 + (−1) = 2.
    8. Test x2+1 the same way. It is x2+0x+1, so you need two integers that multiply to 1 and add to 0. The integer pairs are 1 and 1, which add to 2, and −1 and −1, which add to −2. Neither works, so x2+1 does not factor with integers and stays.Factor completely means checking every piece, including the divisor.
    9. Write every factor: (x2+1)(x+3)(x−1).No piece can be split again.
    Answer
    • x2 + 1 is a factor, because the remainder is 0.
    • x4+2x3−2x2+2x−3=(x2+1)(x+3)(x−1)
    Double-check Multiply back: (x + 3)(x − 1) = x2 − x + 3x − 3 = x2 + 2x − 3. Then (x2 + 1)(x2 + 2x − 3) = x4 + 2x3 − 3x2 + x2 + 2x − 3 = x4 + 2x3 − 2x2 + 2x − 3. Number test at x = 2: the original is 16 + 16 − 8 + 4 − 3 = 25, and the factored form is (5)(5)(1) = 25.

    Rung 7 of 8

    Graph practice: negative intercept

    The graph shows a cubic with leading coefficient 1. One factor is x2 − 5x + 25. Use the marked x-intercept to write the cubic in factored form.

    What it asks. Use the marked intercept and given factor to write the cubic as a product.

    (-5, 0)−6−4−22−200−100100200
    y=x3+125.
    Show the steps and the answer

    The plan. The marked intercept is negative. Subtracting a negative number adds, so the factor x − c has a plus sign. Keep the given quadratic.

    1. Plan. The marked intercept is negative. Subtracting a negative number adds, so the factor x − c has a plus sign. Keep the given quadratic.
    2. At an x-intercept the output is zero. An input c gives the factor x − c.
    3. The leading coefficients of the factors must multiply to the given leading coefficient.
    1. Read the marked point (-5,0). The input is -5, so x−(-5) is a factor.On the horizontal axis the output is zero. In P(c) = (c − c)Q(c) + R, only R remains, so R = 0.
    2. The given quadratic x2−5x+25 has leading coefficient 1. Use multiplier 1.The degrees 2 and 1 add to 3. The leading coefficients must multiply to the given cubic coefficient.
    3. Write (x+5)(x2−5x+25).Keep the given quadratic and the linear factor together, with the required multiplier.
    Answer
    • (x+5)(x2−5x+25)
    • Expanded check: x3 + 125
    • The factors may be written in any order.
    Double-check Expansion cancels both middle terms and gives x3 + 125. At −5 this is −125 + 125 = 0. Synthetic division with −5 gives 1, −5, 25, 0, so the given quadratic is the quotient.

    Rung 8 of 8

    Graph practice: match the scale

    The graph shows a cubic with leading coefficient 3. One factor is x2 + 2x + 4. Use the marked x-intercept to write the cubic in factored form.

    What it asks. Use the marked intercept and given factor to write the cubic as a product.

    (2, 0)−224−40−202040
    y=3x3−24.
    Show the steps and the answer

    The plan. Read the x-intercept, form x − c, and match the cubic's leading coefficient with an outside multiplier.

    1. Plan. Read the x-intercept, form x − c, and match the cubic's leading coefficient with an outside multiplier.
    2. At an x-intercept the output is zero. An input c gives the factor x − c.
    3. The leading coefficients of the factors must multiply to the given leading coefficient.
    1. Read the marked point (2, 0). The input is 2, so x−(2) is a factor.On the horizontal axis the output is zero. In P(c) = (c − c)Q(c) + R, only R remains, so R = 0.
    2. The given quadratic x2+2x+4 has leading coefficient 1. Use multiplier 3.The degrees 2 and 1 add to 3. The leading coefficients must multiply to the given cubic coefficient.
    3. Write 3(x−2)(x2+2x+4).Keep the given quadratic and the linear factor together, with the required multiplier.
    Answer
    • 3(x−2)(x2+2x+4)
    • Expanded check: 3x3 − 24
    • The factors may be written in any order.
    Double-check The product inside the multiplier is x3 − 8; multiplying by 3 gives 3x3 − 24. At 2 this is 24 − 24 = 0. Synthetic division with 2 gives 3, 6, 12, 0, so the quotient is 3(x2 + 2x + 4).

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The remainder is 0, so the answer to the division is 0.
    The remainder is what is left over, not the result. 12 ÷ 3 has remainder 0, yet the result is 4, not 0.
    ✓ Instead: A remainder of 0 means the division came out even. The result is the quotient, and dividend = divisor × quotient.
    ✗ Not this: x3 + 3x2 − 18x − 40 = (x + 2)(x + 5), because the quotient factors that way.
    (x + 2)(x + 5) multiplies out to x2 + 7x + 10, a polynomial of degree 2. The original has degree 3. The divisor was dropped.
    ✓ Instead: x3 + 3x2 − 18x − 40 = (x − 4)(x + 2)(x + 5), with the divisor kept as a factor.
    ✗ Not this: Dividing x3 − 4x2 + x + 5 by x − 2 gives remainder −1, which is close to 0, so x − 2 is a factor.
    There is no close. A remainder of −1 means x3 − 4x2 + x + 5 = (x − 2)(x2 − 2x − 3) − 1, and the extra − 1 breaks the plain multiplication.
    ✓ Instead: x − 2 is not a factor. Only a remainder of exactly 0 counts.
    ✗ Not this: Synthetic division with the number 4 ended in 0, so x + 4 is a factor.
    The number used in synthetic division is c, and the divisor is x − c. Using 4 means the divisor was x − 4.
    ✓ Instead: x − 4 is the factor. Using −4 would test x + 4, since x + 4 = x − (−4).
    ✗ Not this: The quotient x2 + x + 3 must factor, so write it as (x + 1)(x + 3).
    1 × 3 = 3 is right, but 1 + 3 = 4, not 1. Multiplying out gives x2 + 4x + 3, a different polynomial.
    ✓ Instead: x2 + x + 3 does not factor with integers. Leave it: x3 + 2x − 3 = (x − 1)(x2 + x + 3).
    ✗ Not this: Stopping at (x − 4)(x2 + 7x + 10) when the question says factor completely.
    The statement is true, but x2 + 7x + 10 can still be split, so the factoring is not finished.
    ✓ Instead: Factor the quotient too: (x − 4)(x + 2)(x + 5).

    Tips and tricks

    • Trick: to test x − c without finding the quotient, evaluate the dividend at c. A zero result confirms the factor.
    • For complete factoring, division supplies the quotient you must factor next.
    • The degrees of all factors must add to the dividend's degree.
    • The factors' constant terms must multiply to the dividend's constant term.
    • A matching input is a spot check. Expanding the product checks every coefficient.

    7 The trap

    Wrong: give only the factored quotient. Right: include the divisor too, so the product rebuilds the original polynomial.

    Keep in mind

    • For a test, use a zero remainder to factor completely. Given a cubic graph and a quadratic factor, read the missing linear factor from an x-intercept and match the leading coefficient.

    Flash cards

    Say the answer out loud, then flip.

    You divide a polynomial by x − c and the remainder is 0. What does that tell you?
    x − c is a factor of the dividend, and dividend = (x − c) × quotient. It is like packing eggs into cartons with no egg left on the table: the fit is exact.
    A division leaves a remainder that is not 0. Is the divisor a factor, and what do you write?
    • No, the divisor is not a factor. The remainder is the amount that spoils the exact fit, like 2 eggs left on the table.
    • Write dividend = divisor × quotient + remainder and stop.
    Why does a remainder of 0 make the divisor a factor?
    Every division gives dividend = divisor × quotient + remainder. Put 0 in for the remainder and the last piece disappears: dividend = divisor × quotient. The divisor is now one of the multiplied pieces, which is what the word factor means.
    Dividing x3 + 3x2 − 18x − 40 by x − 4 gives remainder 0, and the quotient factors into (x + 2)(x + 5). What is the complete factored form, and how do you check that no factor is missing?
    • (x − 4)(x + 2)(x + 5). The divisor is one of the factors, so it must be in the answer.
    • Check by counting degrees: 1 + 1 + 1 = 3, which matches the degree of the dividend.