Quarry School

Reciprocals and roots complete the toolkit

Subject: MathematicsLeans on: Reciprocal of a fractionLeans on: Positive and nonnegative
Level 2 · BuildingAbout 13 min read12 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Picture a recipe card with two kinds of jobs.

    Strategy

    1. Identify the actual operation and its order.

    2. Exclude zero denominators and negative even-root insides.

    3. Determine whether output zero and each sign are possible.

    4. Undo the formula to reach any claimed output.

    5. Write the full domain and range.

    Rule

    For 1x: x ≠ 0 and y ≠ 0. For 1x2: x ≠ 0 and y > 0.
    For x: x ≥ 0 and y ≥ 0. For x3: x and y may be any real numbers.

    Step

    1. 1. Identify whether you are dividing, squaring a denominator, taking a square root, or taking a cube root.

    2. 2. Find the domain by checking denominators and the number under an even root.

    3. 3. Determine the sign and possible zero value of the output.

    4. 4. Supply an input for every proposed allowed output by undoing the calculation.

    5. 5. Write domain and range on separate lines and compare the formula with its toolkit shape.

    Question

    Evaluate r(−3) for r(x) = 1x, s(−3) for s(x) = 1x2, t(9) for t(x) = x, and u(−125) for u(x) = x3. Then state the domain and range of each. The inputs are supplied; first find the outputs, then describe the full sets.

    Answer

    r(−3) = −13
    s(−3) = 19
    t(9) = 3
    u(−125) = −5
    r domain: (−∞, 0) ∪ (0, ∞)
    r range: (−∞, 0) ∪ (0, ∞)
    s domain: (−∞, 0) ∪ (0, ∞)
    s range: (0, ∞)
    t domain: [0, ∞)
    t range: [0, ∞)
    u domain: (−∞, ∞)
    u range: (−∞, ∞)

    Trap

    Treating all roots as square roots, or all reciprocals as positive. An odd root accepts negative inputs. A reciprocal can be negative; reciprocal squared is positive because its denominator is squared.

    Term

    Function

    Definition

    A rule assigning exactly one output to each allowed input. Different inputs may share an output.

    Term

    Input

    Definition

    The value you choose or supply to a function before its rule calculates an output.

    Term

    Output

    Definition

    The result a function produces from a chosen allowed input.

    Term

    Equation

    Definition

    A statement that two expressions are equal. Solving it finds values making the statement true.

    Term

    Formula

    Definition

    A mathematical recipe describing how quantities are related or how to calculate a result.

    Term

    Domain

    Definition

    The set of all inputs allowed for a function, considering its arithmetic and any stated context or restrictions.

    Term

    Range

    Definition

    The set of all outputs a function actually produces from its allowed inputs.

    Term

    Real number

    Definition

    A number with a position on the number line, including whole numbers, fractions, decimals and numbers such as 2.

    Term

    Restriction

    Definition

    A condition limiting allowed inputs, from arithmetic, a stated rule, or a meaningful physical situation.

    Term

    Undefined

    Definition

    Having no assigned value in the number system or function being used. Division by zero is undefined in real arithmetic.

    Term

    Numerator

    Definition

    The top expression in a fraction. It gives the amount divided by the denominator.

    Term

    Denominator

    Definition

    The bottom expression in a fraction. It is the divisor and cannot equal 0.

    Term

    Nonnegative

    Definition

    Greater than or equal to 0. It includes positive numbers and 0, but excludes negative numbers.

    Term

    Positive

    Definition

    Strictly greater than 0. Zero is excluded.

    Term

    Negative

    Definition

    Strictly less than 0. Negative numbers lie to the left of 0 on a number line.

    Term

    Even root

    Definition

    A root undoing an even power, such as a square or fourth power. Real even roots require nonnegative radicands.

    Term

    Odd root

    Definition

    A root undoing an odd power, such as a cube. It accepts negative radicands and keeps their negative sign.

    Term

    Principal square root

    Definition

    The nonnegative square root chosen by the √ symbol. It is one value even when a squared equation has two solutions.

    Term

    Endpoint

    Definition

    A finite boundary value at an interval's end, included or excluded according to its bracket or parenthesis.

    Term

    Bracket

    Definition

    The interval symbols [ and ], indicating that the adjacent finite endpoint belongs to the set.

    Term

    Graph

    Definition

    A picture of points representing input and output pairs, usually with inputs horizontal and outputs vertical.

    Term

    Toolkit function

    Definition

    One of the basic functions whose formulas, shapes, domains and ranges help you understand more complicated functions.

    Term

    Constant function

    Definition

    A function with the same output for every allowed input. The toolkit version f(x) = c accepts all real inputs and has range {c}.

    Term

    Identity function

    Definition

    The function f(x) = x. Its output equals its input, and its domain and range are both all real numbers.

    Term

    Absolute value function

    Definition

    The function f(x) = |x| gives the input's distance from 0. Its domain is all real numbers and its range is [0, ∞).

    Term

    Quadratic function

    Definition

    A polynomial whose highest power is x2. The toolkit quadratic f(x) = x2 has domain all real numbers and range [0, ∞).

    Term

    Cubic function

    Definition

    A polynomial whose highest power is x3. The toolkit cubic f(x) = x3 has domain and range both equal to all real numbers.

    Term

    Reciprocal function

    Definition

    The toolkit function f(x) = 1x. Zero is excluded from both its domain and range.

    Term

    Reciprocal squared function

    Definition

    The toolkit function f(x) = 1x2. Its domain excludes 0, and its range contains exactly the positive real numbers.

    Term

    Square root function

    Definition

    The toolkit function f(x) = x. It chooses the principal square root, so its domain and range are [0, ∞).

    Term

    Cube root function

    Definition

    The toolkit function f(x) = x3. It undoes cubing and has domain and range both equal to all real numbers.

    Term

    Odd function

    Definition

    A function with a domain symmetric about 0 and f(−x) = −f(x). Reversing an input's sign reverses its output's sign.

    Term

    Factor

    Definition

    One of the numbers or expressions multiplied together to form a product.

    1 In plain words

    Picture a recipe card with two kinds of jobs. One job shares an amount by division. Another finds the side length of a square or a cube when you know its area or volume. The last four toolkit functions do those jobs: reciprocal, reciprocal squared, square root, and cube root. Division needs a nonzero amount on the bottom. A real square root needs a nonnegative number inside it and returns the nonnegative root. A cube root can accept a negative number and return a negative number. Check both the input permission and the output possibilities. A rule can exclude the same number from both sets, but for different reasons.

    2 Picture it

    −4−2024−4−2024
    constant: f(x) = c
    −4−2024−4−2024
    identity: f(x) = x
    −4−2024−4−2024
    absolute value: f(x) = |x|
    −4−2024−4−2024
    quadratic: f(x) = x2
    −4−2024−4−2024
    cubic: f(x) = x3
    −4−2024−4−2024
    reciprocal: f(x) = 1/x
    −4−2024−4−2024
    reciprocal squared: f(x) = 1/x2
    −4−2024−4−2024
    square root: f(x) = x
    −4−2024−4−2024
    cube root: f(x) = x3

    Reminder

    Reminder: Reciprocal of a fraction, Positive and nonnegative
    • Reciprocal of a fraction. Dividing 1 by a nonzero fraction flips it: 1 ÷ 25 = 52.
    • Positive and nonnegative. Positive means > 0; nonnegative means ≥ 0. The difference decides whether zero gets a bracket.

    3 Why

    For a reciprocal, zero cannot be an input because division by zero is undefined. Zero cannot be an output either: if 1x = 0, multiplying by an allowed x would give 1 = 0. Squaring a nonzero denominator makes it positive, so reciprocal squared outputs are strictly positive. Square root outputs are nonnegative by the principal-root convention. Cube roots preserve sign because cubing preserves sign. Working backward from a target output establishes the full range of each function.

    4 The rule

    For 1x: x≠0 and y≠0.

    For 1x2: x≠0 and y > 0.
    For x: x≥0 and y≥0. For x3: x and y may be any real numbers.

    The same idea, five ways

    Say it

    Reciprocals divide, and roots undo powers. Check what each operation allows.

    Write it

    A denominator excludes zero, a principal square root requires nonnegative inside and output values, and a cube root accepts either sign.

    In math
    • Reciprocal: 1x, x ≠ 0, y ≠ 0
    • Reciprocal squared: 1x2, x ≠ 0, y > 0
    • Square root: x, x ≥ 0, y ≥ 0
    • Cube root: x3, domain and range (−∞, ∞)
    Like

    Sharing a batch uses division; finding a square or cube's side uses a root.

    See it
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024

    The same nine graphs again, in the same order: constant, identity, absolute value, quadratic, cubic, reciprocal, reciprocal squared, square root and cube root.

    The same idea, other ways

    Two different zero questions

    In 1x, input zero makes the division fail. Output zero would require 1 to equal zero after multiplication, which cannot happen. Domain and range both omit zero, but the explanations are different.

    Undo the machine

    To produce output 4, 1x uses input 14, 1x2 uses 12, x uses 16, and x3 uses 64. A desired output tells you which operation to undo.

    16principal squarerootinputoutput4
    Squaring the desired square-root output finds an input that produces it.
    Toolkit functionFormulaShapeDomainRange
    Constant functionchorizontal line(−∞,∞){c}, or [c, c]
    Identity functionxdiagonal line through zero(−∞,∞)(−∞,∞)
    Absolute value function|x|V with bottom at zero(−∞,∞)[0, ∞)
    Quadratic functionx2bowl with bottom at zero(−∞,∞)[0, ∞)
    Cubic functionx3curve from negative to positive heights(−∞,∞)(−∞,∞)
    Reciprocal function1xtwo branches with matching input and output signs(−∞,0)∪(0,∞)(−∞,0)∪(0,∞)
    Reciprocal squared function1x2two branches above zero(−∞,0)∪(0,∞)(0, ∞)
    Square root functionxcurve starting at zero, going right and up[0, ∞)[0, ∞)
    Cube root functionx3curve through zero with negative and positive heights(−∞,∞)(−∞,∞)

    Part 1: Reciprocal function

    Think of dividing one whole batch into an amount x. The reciprocal function returns 1 divided by x, written 1x. A larger positive denominator gives a smaller positive share. The mathematical rule also allows negative denominators, which give negative answers. It cannot divide by zero. Its graph has two separated branches, one with positive inputs and outputs and one with negative inputs and outputs.

    • Formula: f(x) = 1x.
    • Shape: two branches, with x and y having the same sign; neither branch reaches either axis.
    • Domain: (−∞, 0) ∪ (0, ∞), because the denominator cannot be zero.
    • Range: (−∞, 0) ∪ (0, ∞). Zero would require 1 = 0 after multiplying by x. Every nonzero output y is attained by the nonzero input x = 1y.
    (1, 1)(−1, −1)domainrange−4−224−4−224
    y = 1/x.

    Reminder

    Reminder: Reciprocal of a fraction, Positive and nonnegative
    • Reciprocal of a fraction. Dividing 1 by a nonzero fraction flips it: 1 ÷ 25 = 52.
    • Positive and nonnegative. Positive means > 0; nonnegative means ≥ 0. The difference decides whether zero gets a bracket.

    The same idea, five ways

    Say it

    Say one divided by the input.

    Write it

    Reciprocal input and output both exclude zero.

    In math
    • f(x)=1x
    • x ≠ 0
    • y ≠ 0
    • Domain and range: (−∞, 0) ∪ (0, ∞)
    Like

    One whole batch divided by a nonzero sharing amount.

    See it
    (1, 1)(−1, −1)domainrange−4−224−4−224
    The same picture again: y = 1/x.

    Worked example

    Reciprocal of one and a negative fraction

    For f(x) = 1x, find f(1), f(−27), the domain, and the range. You are dividing 1 by each supplied input, then describing every permitted input and attainable output.

    Show the steps and the answer
    (1, 1)(−1, −1)domainrange−4−224−4−224
    The same picture a third time: y = 1/x.
    0(−∞, 0) ∪ (0, ∞)
    (−∞, 0) and (0, ∞) on a number line.
    0(−∞, 0) ∪ (0, ∞)
    Range: (−∞, 0) ∪ (0, ∞) The endpoint symbols record which limits belong.
    1. f(1)=11=1.One divided by one is one.
    2. f(−27)=1÷(−27)=−72.Dividing by a nonzero fraction multiplies by its flip, and the negative sign stays.
    3. Write domain (−∞,0)∪(0,∞).All real inputs work except the input that makes the denominator zero.
    4. Zero is not an output: 1x=0 would imply 1=0×x=0.Multiplying an equation by a permitted nonzero denominator cannot change its truth.
    5. For any y≠0, choose x=1y. Then 1x=1÷1y=y. Write range (−∞,0)∪(0,∞).The chosen input is nonzero and produces every nonzero target output.
    Answer
    • f(1) = 1
    • f(−27)=−72
    • Domain: (−∞, 0) ∪ (0, ∞)
    • Range: (−∞, 0) ∪ (0, ∞)
    Double-check Multiply the fractional input and its claimed output: (−27) × (−72) = 1414 = 1. This verifies that they are reciprocals without repeating the division.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: A tiny reciprocal equals zero, so zero belongs in the range.
    Being close to zero is different from equaling zero. For example 11000 is positive, and multiplying it by 1000 gives 1.
    ✓ Instead: The reciprocal approaches zero for large input size but never attains zero.

    Tips and tricks

    • For a reciprocal, input × output must equal 1. That checks the sign and the fraction.

    Part 2: Reciprocal squared function

    Use the sharing calculation again, but square the input before putting it on the bottom. The reciprocal squared function is 1x2. Whether the original input is positive or negative, its nonzero square is positive. So every output is positive. At input zero, squaring still gives zero, and division fails. Its two graph branches both sit above the horizontal axis because neither a negative output nor output zero can occur.

    • Formula: f(x) = 1x2.
    • Shape: two matching branches above zero, rising near input zero and approaching output zero for large input size.
    • Domain: (−∞, 0) ∪ (0, ∞), because x2 = 0 exactly when x = 0.
    • Range: (0, ∞). Each denominator is positive and the numerator is 1. For any y > 0, choose x = 1y; then x2 = 1y, so 1x2 = y.
    (−1, 1)(1, 1)domainrange−4−224246
    y = 1/x2.

    Reminder

    Reminder: Reciprocal of a fraction, Positive and nonnegative
    • Reciprocal of a fraction. Dividing 1 by a nonzero fraction flips it: 1 ÷ 25 = 52.
    • Positive and nonnegative. Positive means > 0; nonnegative means ≥ 0. The difference decides whether zero gets a bracket.

    The same idea, five ways

    Say it

    Say square the input, then take its reciprocal.

    Write it

    Reciprocal squared outputs are strictly positive.

    In math
    • f(x)=1x2
    • x ≠ 0
    • y > 0
    • Domain: (−∞, 0) ∪ (0, ∞)
    • Range: {y | y > 0} = (0, ∞)
    Like

    A sharing machine squares its divisor before dividing, so the divisor's original sign disappears.

    See it
    (−1, 1)(1, 1)domainrange−4−224246
    The same picture again: y = 1/x2.

    Worked example

    Square the denominator before dividing

    For f(x) = 1x2, find f(1), f(−35), the domain, and the range. You are squaring the supplied input first and then taking its reciprocal.

    Show the steps and the answer
    (−1, 1)(1, 1)domainrange−4−224246
    The same picture a third time: y = 1/x2.
    0(−∞, 0) ∪ (0, ∞)
    The same picture a third time: (−∞, 0) and (0, ∞) on a number line.
    0(0, ∞)
    Range: (0, ∞) The endpoint symbols record which limits belong.
    1. f(1)=112=1.The denominator is the square of 1, which is 1.
    2. (−35)2=925.Square the numerator and denominator; two negative factors give a positive square.
    3. f(−35)=1÷925=259.The reciprocal of a nonzero fraction is its flip.
    4. Write domain (−∞,0)∪(0,∞).The squared denominator is zero only at x = 0.
    5. Write range (0,∞). For any y > 0, x=1y gives x2=1y and then 1x2=y.The output must be positive and cannot be zero, and this input reaches every positive target.
    Answer
    • f(1) = 1
    • f(−35)=259
    • Domain: (−∞, 0) ∪ (0, ∞)
    • Range: (0, ∞)
    Double-check Multiply the squared input by the output: 925 × 259 = 1. The input 35 gives the same output as −35, agreeing with the graph's matching branches.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: f(−35) = −259 because the input is negative.
    The square makes the denominator positive before division happens.
    ✓ Instead: f(−35) = 259, which is strictly positive.

    Tips and tricks

    • Put parentheses around a negative input in the denominator. Compute the square on a separate line.

    Part 3: Square root function

    Suppose a square tile has area 16. Its side length is 4, the nonnegative number whose square is 16. The square root function makes that choice: x returns the principal square root, meaning the nonnegative root. Although both 4 and −4 square to 16, 16 returns only 4. This convention gives each input one output. A square cannot have negative real area, so negative inputs have no real square root.

    • Formula: f(x) = x, the principal square root.
    • Shape: a curve starting at (0, 0) and extending right and upward.
    • Domain: [0, ∞), because no real square is negative and zero is allowed.
    • Range: [0, ∞). The principal-root convention requires nonnegative outputs. For any y ≥ 0, input x = y2 gives x = y2 = y. Thus every nonnegative output is attained.
    • A principal square root preserves order on nonnegative inside values. For example, an inside greater than 4 has root greater than 2: a nonnegative output at most 2 would square to at most 4 and could not produce that inside.
    (0, 0)(4, 2)(9, 3)domainrange481224
    y=x.

    Reminder

    Reminder: Reciprocal of a fraction, Positive and nonnegative
    • Reciprocal of a fraction. Dividing 1 by a nonzero fraction flips it: 1 ÷ 25 = 52.
    • Positive and nonnegative. Positive means > 0; nonnegative means ≥ 0. The difference decides whether zero gets a bracket.

    The same idea, five ways

    Say it

    Say the nonnegative number whose square is the input.

    Write it

    The principal square-root convention selects one nonnegative output.

    In math
    • f(x)=x
    • x ≥ 0
    • y ≥ 0
    • Domain and range: [0, ∞)
    • x2=|x|
    Like

    Find a square tile's nonnegative side length from its area.

    See it
    (0, 0)(4, 2)(9, 3)domainrange481224
    The same picture again: y = x.

    Worked example

    Principal roots at zero and a fraction

    For f(x) = x, find f(0), f(8116), the domain, and the range. You are selecting the nonnegative number whose square equals each input.

    Show the steps and the answer
    (0, 0)(4, 2)(9, 3)domainrange481224
    The same picture a third time: y = x.
    0[0, ∞)
    Domain: [0, ∞) The endpoint symbols record which limits belong.
    0[0, ∞)
    Range: [0, ∞) The endpoint symbols record which limits belong.
    1. f(0)=0=0.Zero is nonnegative and 02 = 0.
    2. f(8116)=8116=8116=94.The square of 94 is 8116, and 94 is nonnegative.
    3. Write domain [0,∞).Zero and positive numbers have real principal square roots; negative numbers do not.
    4. Write range [0,∞). For any y≥0, choose x=y2; then x=y.The square-root symbol returns only nonnegative values, and every such value has a usable squared input.
    Answer
    • f(0) = 0
    • f(8116)=94
    • Domain: [0, ∞)
    • Range: [0, ∞)
    Double-check Square the claimed output: (94)2 = 8116, the original input. Its sign is nonnegative, so it is the principal root. The negative value −94 would pass the square check but fail the principal-root sign check.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: (−4)2 = −4 because the root cancels the square.
    The inner square equals 16, and 16 selects 4. A square loses the original sign.
    ✓ Instead: x2 = |x| for real x, so (−4)2 = 4.

    Tips and tricks

    • Check a square root twice: square it to recover the input, then check that the output is nonnegative.

    Part 4: Cube root function

    Picture finding the side of a cube-shaped box when you know its volume. The cube root undoes the three-factor multiplication. In the mathematical rule, a negative input works too: the cube of −2 is −8, so the cube root of −8 is −2. Unlike squaring, cubing keeps the sign. The cube root function therefore accepts every real input and can produce every real output, including negative numbers and zero.

    • Formula: f(x) = x3.
    • Shape: a rising curve through (0, 0), extending to negative inputs and outputs on the left and positive inputs and outputs on the right.
    • Domain: (−∞, ∞), because every real number has a real cube root.
    • Range: (−∞, ∞). For any real y, choose x = y3; then x3 = y.
    • It is an odd function: f(−x) = −f(x). Opposite inputs have opposite outputs because (−y)3 = −y3.
    (−8, −2)(0, 0)(8, 2)domainrange−8−448−22
    y=x3.

    Reminder

    Reminder: Reciprocal of a fraction, Positive and nonnegative
    • Reciprocal of a fraction. Dividing 1 by a nonzero fraction flips it: 1 ÷ 25 = 52.
    • Positive and nonnegative. Positive means > 0; nonnegative means ≥ 0. The difference decides whether zero gets a bracket.

    The same idea, five ways

    Say it

    Say the real number whose cube is the input.

    Write it

    Cube roots allow either sign, and opposite inputs have opposite outputs.

    In math
    • f(x)=x3
    • x=y3
    • Domain and range: (−∞, ∞)
    • f(−x)=−f(x)
    Like

    Undo the three equal factors of a cube, keeping a negative direction when the signed input has one.

    See it
    (−8, −2)(0, 0)(8, 2)domainrange−8−448−22
    The same picture again: y = x3.

    Worked example

    Cube roots at zero and a negative fraction

    For f(x) = x3, find f(0), f(−12564), the domain, and the range. Explain how the negative input fits the odd-function rule. You are finding the real number that cubes to each input.

    Show the steps and the answer
    (−8, −2)(0, 0)(8, 2)domainrange−8−448−22
    The same picture a third time: y = x3.
    1. f(0)=03=0.03=0.
    2. (−54)3=−5×5×54×4×4=−12564.Three negative numerator factors keep a negative sign; the cubes of 5 and 4 are 125 and 64.
    3. Therefore f(−12564)=−54.A cube root is the real number whose cube equals the input.
    4. Write domain and range (−∞,∞). For any proposed real output y, input x=y3 produces x3=y.Cubing and cube-rooting work with negative, zero, and positive real numbers.
    5. f(12564)=54, so f(−12564)=−f(12564).The odd-function rule says that opposite inputs produce opposite outputs.
    Answer
    • f(0) = 0
    • f(−12564)=−54
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    • Odd-function check: f(−12564) = −f(12564)
    Double-check The corresponding positive root is 54, since 53 = 125 and 43 = 64. Reversing both signs gives the opposite graph point and the negative root, agreeing with the direct cube calculation.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: ∛(−8) is not real because roots cannot contain negative numbers.
    The restriction applies to even roots. A negative number cubed stays negative, so (−2)3 = −8.
    ✓ Instead: ∛(−8) = −2, and cube-root inputs can be any real number.

    Tips and tricks

    • Odd root, original sign. A cube root undoes a cube without losing a negative sign.

    5 How

    1. Identify whether you are dividing, squaring a denominator, taking a square root, or taking a cube root.
    2. Find the domain by checking denominators and the number under an even root.
    3. Determine the sign and possible zero value of the output.
    4. Supply an input for every proposed allowed output by undoing the calculation.
    5. Write domain and range on separate lines and compare the formula with its toolkit shape.

    Choose the reciprocal or root restrictions

    1
    Is x in a denominator?
    YesExclude any x that makes the denominator zero. A square on that denominator also makes each valid denominator positive.
    NoCheck for a root.
    ↓
    2
    Is the root a square root?
    YesRequire a nonnegative inside and use the nonnegative principal output.
    NoA cube root allows negative, zero, and positive inside and output values.
    1. Identify the actual operation and its order.
    2. Exclude zero denominators and negative even-root insides.
    3. Determine whether output zero and each sign are possible.
    4. Undo the formula to reach any claimed output.
    5. Write the full domain and range.

    6 Worked example

    Worked example

    Compare reciprocal, reciprocal squared, and two roots

    Evaluate r(−3) for r(x) = 1x, s(−3) for s(x) = 1x2, t(9) for t(x) = x, and u(−125) for u(x) = x3. Then state the domain and range of each. The inputs are supplied; first find the outputs, then describe the full sets.

    Show the steps and the answer
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024

    The same nine graphs a third time, in the same order: constant, identity, absolute value, quadratic, cubic, reciprocal, reciprocal squared, square root and cube root.

    1. We need all permitted inputs and all outputs they actually produce.Translate the question into what must be found before calculating.
    2. r(−3)=1−3=−13.A positive number divided by a negative number is negative, and the denominator is not zero.
    3. s(−3)=1(−3)2=19.Square the whole denominator first. Two negative factors make 9, so this reciprocal is positive.
    4. t(9)=9=3.The principal square root chooses the nonnegative number whose square is 9.
    5. u(−125)=(−125)3=−5.(−5) × (−5) × (−5) = −125, so a negative cube root is real.
    6. For r, omit input 0 and output 0. Every y≠0 comes from x=1y.Division cannot have a zero denominator, and substituting this nonzero x into 1x gives y.
    7. For s, omit input 0 and require output y > 0. Every positive y comes from x=1y.Squaring this nonzero input gives 1y, and taking its reciprocal gives y.
    8. For t, domain and range are [0,∞). Every y≥0 comes from x=y2. For u, domain and range are (−∞,∞); every real y comes from x=y3.The indicated powers undo their matching roots. The principal square root returns y only when y is nonnegative, whereas cubing and cube-rooting preserve every real sign.
    Answer
    • r(−3)=−13
    • s(−3)=19
    • t(9) = 3
    • u(−125)=−5
    • r domain: (−∞, 0) ∪ (0, ∞)
    • r range: (−∞, 0) ∪ (0, ∞)
    • s domain: (−∞, 0) ∪ (0, ∞)
    • s range: (0, ∞)
    • t domain: [0, ∞)
    • t range: [0, ∞)
    • u domain: (−∞, ∞)
    • u range: (−∞, ∞)
    Double-check Undo each numerical calculation: (−3) × (−13) = 1, 9 × 19 = 1, 32 = 9, and (−5)3 = −125. These multiplication and power checks verify the division and root results by a second operation.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: 9 = 3 and −3, so the square root function has two outputs at input 9.
    The equation z2 = 9 has two solutions, but the symbol 9 selects the principal square root. This convention gives the function one output for each input.
    ✓ Instead: 9 = 3. Solving z2 = 9 gives z = 3 or z = −3.
    ✗ Not this: 1x2 has range [0, ∞) because it is nonnegative.
    Nonnegative includes zero, but a fraction with numerator 1 cannot equal zero. Its nonzero squared denominator is positive.
    ✓ Instead: The range is (0, ∞): every positive value is attained, and zero is excluded.

    Tips and tricks

    • Read the denominator before deciding the sign: 1−3 is negative; 1(−3)2 is positive.
    • Square root means the principal square root. It includes output zero, but a root placed in a denominator may have to exclude input zero.

    7 The trap

    Treating all roots as square roots, or all reciprocals as positive. An odd root accepts negative inputs. A reciprocal can be negative; reciprocal squared is positive because its denominator is squared.

    Comes back in