Quarry School

Meet the nine toolkit functions

Subject: MathematicsLeans on: Interval notationLeans on: Undefined
Level 2 · BuildingAbout 50 min read16 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Think of a toolbox holding a few familiar tools.

    Rule

    Toolkit functions: constant c, identity x, absolute value |x|, quadratic x2, cubic x3, reciprocal 1x, reciprocal squared 1x2, square root x, and cube root x3. For each, connect formula, graph, domain, range, and a sample table.

    Step

    1. Identify the operation in the formula and match its familiar graph shape.

    2. Check which real inputs the operation accepts. These make its domain.

    3. Ask which outputs it can actually produce. These make its range.

    4. Evaluate one small input with parentheses, then check the result against the graph or sample table.

    5. When an output is given, reverse the operation and check every candidate against the domain.

    Question

    The constant function k(x) = -2 is one of the nine toolkit functions. The figure shows its graph: a horizontal line 2 units below the x-axis that passes through the marked points (-4, -2), (0, -2) and (3, -2).
    (a) Say what the formula does with its input, and name the shape of the graph.
    (b) State the domain of k.
    (c) State the range of k.
    (d) Evaluate k(-1), writing the input in parentheses. Then complete a sample table for x = -1, 0 and 2, and check it against the graph.
    (e) Solve k(x) = -2. Then solve k(x) = 2.

    Answer

    (a) k ignores its input and always outputs -2; its graph is the horizontal line y = -2. (b) Domain: all real numbers, (-∞, ∞). (c) Range: {-2}, only the value -2. (d) k(-1) = -2. The table gives k(-1) = -2, k(0) = -2 and k(2) = -2, and each of these points lies on the graph. (e) k(x) = -2 is true for every real number x; k(x) = 2 has no solution.

    Trap

    Memorizing a graph shape without checking its input and output restrictions. The square and square-root functions both stay at nonnegative heights, but only the square root excludes negative inputs.

    Strategy

    1. Choose inputs that make the calculation clear. For most rules use −2, −1, 0, 1 and 2.

    2. For square root, use 0, 1, 4 and 9. For cube root, use −8, −1, 0, 1 and 8.

    3. For the two reciprocal rules, skip zero and use −2, −1, −12, 12, 1 and 2.

    4. Calculate each output, write the input first in (x, y), and plot the points.

    5. Use the rule's familiar silhouette to connect the points. Keep reciprocal graphs in separate pieces across the forbidden zero.

    6. Read domain left to right as the graph's shadow on the input axis. Read range bottom to top as its shadow on the output axis.

    7. Confirm each full shadow from the operation, because a few plotted samples alone cannot show every real input or output.

    Term

    Ordered pair

    Definition

    Two values written in a fixed order. Here the first is an input and the second is its paired output.

    Term

    Set

    Definition

    A collection of distinct members. Braces list them, and repeating a member does not create a new member.

    Term

    Real number

    Definition

    A number on the number line, including integers, fractions and numbers such as 2.

    Term

    Function

    Definition

    A relation assigning exactly one output to every input in its domain.

    Term

    Input

    Definition

    A value chosen for a function. The definition decides which values are allowed.

    Term

    Output

    Definition

    The result a function assigns to a particular input.

    Term

    Domain

    Definition

    The set of all inputs accepted by the defined relation or function.

    Term

    Range

    Definition

    The set of all outputs actually produced by the defined relation or function.

    Term

    Function notation

    Definition

    Writing an output as f(x), with the rule name outside and the input inside parentheses.

    Term

    Equation

    Definition

    A statement that two expressions are equal, shown with an equals sign.

    Term

    Formula

    Definition

    A mathematical instruction connecting quantities, often written as an equation.

    Term

    Evaluate

    Definition

    Find the output at a given input by applying the rule or reading its representation.

    Term

    Solve

    Definition

    Find every allowed input that satisfies a stated equation or produces a specified output.

    Term

    Graph

    Definition

    A picture of ordered pairs at their coordinate locations. A graph of a function contains every pair (x, f(x)) for its allowed inputs.

    Term

    Coordinate

    Definition

    One number in a point's ordered address.

    Term

    y-coordinate

    Definition

    The second number of a plotted pair, showing vertical location and usually the output.

    Term

    Horizontal axis

    Definition

    The left-right reference line on a graph, conventionally the input or x-axis.

    Term

    Horizontal line test

    Definition

    An established function is one-to-one if every horizontal line meets its graph at most once.

    Term

    Toolkit functions

    Definition

    The nine basic named functions that form this section's library of functions, used as building blocks for later formulas and graphs.

    Term

    Constant

    Definition

    A value that stays fixed in the stated rule.

    Term

    Constant function

    Definition

    A function f(x) = c that returns the same fixed real output for every real input.

    Term

    Identity function

    Definition

    The rule f(x) = x, returning the input unchanged.

    Term

    Absolute value

    Definition

    A number's distance from zero, written between vertical bars. It is always nonnegative.

    Term

    Absolute value function

    Definition

    The rule f(x) = |x|, returning each input's distance from zero.

    Term

    Quadratic function

    Definition

    A function f(x) = ax2 + bx + c with fixed real coefficients and a ≠ 0. Its toolkit form is f(x) = x2.

    Term

    Cubic function

    Definition

    A function f(x) = ax3 + bx2 + cx + d with fixed real coefficients and a ≠ 0. Its toolkit form is f(x) = x3.

    Term

    Reciprocal

    Definition

    One divided by a nonzero number. A number times its reciprocal equals 1.

    Term

    Reciprocal function

    Definition

    The rule f(x) = 1x, defined for real x ≠ 0.

    Term

    Reciprocal squared function

    Definition

    The rule f(x) = 1x2, with real x ≠ 0. All its outputs are positive.

    Term

    Square root

    Definition

    The nonnegative number whose square equals the given nonnegative input.

    Term

    Principal square root

    Definition

    The nonnegative root chosen by the symbol √. Solving a squared equation can require both signs.

    Term

    Square root function

    Definition

    The rule f(x) = x. Its real inputs and outputs are both nonnegative.

    Term

    Cube root

    Definition

    The unique real number whose cube equals the input.

    Term

    Cube root function

    Definition

    The rule f(x) = x3. It accepts every real input and can produce every real output.

    Term

    Factor

    Definition

    A quantity multiplied by another quantity in a product.

    Term

    Difference quotient

    Definition

    The average rate of change: new output minus old output, divided by the nonzero input step h. It is the slope between two graph points.

    Term

    Numerator

    Definition

    The top of a fraction, showing the quantity being divided.

    Term

    Denominator

    Definition

    The bottom of a fraction, showing the divisor or number of equal pieces in one whole. It cannot be zero.

    Term

    Power

    Definition

    A quantity written with a base and exponent. Positive whole-number exponents count multiplied copies; zero and negative exponents extend that pattern.

    Term

    Interval notation

    Definition

    A way to write stretches of the number line. Brackets include finite endpoints; parentheses exclude them or accompany infinity.

    Term

    Infinity

    Definition

    Unending extent, written ∞. It is not a final real-number endpoint.

    Term

    Undefined

    Definition

    No value is assigned by the rule, often because it would require division by zero.

    Term

    Radius

    Definition

    The distance from the center of a circle to its edge. Here a circle has positive radius.

    Term

    Area

    Definition

    The amount of flat surface inside a shape, measured in square units.

    Definition

    The fixed ratio of a circle's circumference to its diameter, approximately 3.14159. Keep π written for exact circle-area answers.

    Term

    Odd

    Definition

    An integer that is not divisible by 2 into an integer result.

    Term

    Even

    Definition

    An integer divisible by 2 into an integer result.

    Term

    Origin

    Definition

    The point (0, 0), where the horizontal and vertical axes meet.

    Term

    Parabola

    Definition

    The graph shape of a quadratic function, appearing as a rounded U or an upside-down U when y depends quadratically on x.

    Term

    Nonnegative

    Definition

    Zero or positive; written x ≥ 0.

    Term

    Circle

    Definition

    The set of points at one fixed positive distance from a center.

    Term

    ±

    Definition

    A symbol packing both a positive and a negative choice into one line. The choices differ unless the quantity is zero.

    Term

    ≠

    Definition

    A symbol saying two quantities are not equal.

    Term

    Difference

    Definition

    The result of a subtraction. For a change, subtract the old value from the new value.

    Term

    Quotient

    Definition

    The result of a division. The divisor must be nonzero.

    Term

    Term

    Definition

    One added or subtracted piece of an expression. Keep its sign with that piece.

    1 In plain words

    Think of a toolbox holding a few familiar tools. You recognize a hammer by its shape and know what it does before using it on a larger project. Toolkit functions are nine basic rules you will recognize by their formulas, graph shapes, and sample input and output pairs. Later lessons combine and move these shapes. Learn each rule's action first: copy, measure distance, take a power, take a reciprocal, or take a root. Then use that action to rebuild its allowed inputs and possible outputs. The table is a reference, and every function below has its own explanation and worked example.

    2 Picture it

    −4−2024−4−2024
    constant: f(x) = c
    −4−2024−4−2024
    identity: f(x) = x
    −4−2024−4−2024
    absolute value: f(x) = |x|
    −4−2024−4−2024
    quadratic: f(x) = x2
    −4−2024−4−2024
    cubic: f(x) = x3
    −4−2024−4−2024
    reciprocal: f(x) = 1/x
    −4−2024−4−2024
    reciprocal squared: f(x) = 1/x2
    −4−2024−4−2024
    square root: f(x) = x
    −4−2024−4−2024
    cube root: f(x) = x3

    Reminder

    Reminder: Interval notation, Undefined
    • Interval notation. [0, ∞) includes zero; (0, ∞) excludes it. Infinity is never an endpoint you can include.
    • Undefined. 10 is undefined, not zero. Zero cannot be a denominator.

    3 Why

    Many complicated formulas are built from a small set of basic operations. Recognizing the operation lets you predict the graph and reject impossible inputs or outputs before calculating. For example, a denominator cannot be zero, and a real square root cannot accept a negative input. Domain and range are therefore consequences of what the rule does, rather than nine unrelated facts to memorize. A few sample points help recognize a shape but do not define its full domain.

    4 The rule

    Toolkit functions: constant c, identity x, absolute value |x|, quadratic x2, cubic x3, reciprocal 1x, reciprocal squared 1x2, square root x, and cube root x3.

    For each, connect formula, graph, domain, range, and a sample table.

    The same idea, five ways

    Say it

    Name the rule, then read what can go in and come out

    Write it

    Each toolkit formula has a graph, a domain of inputs and a range of outputs.

    In math
    • f(x) = x2: domain (−∞, ∞), range [0, ∞)
    • f(x) = x: domain [0, ∞), range [0, ∞)
    Like

    Recognize a familiar tool, then check what the tool can do.

    See it
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024

    The same nine graphs again, in the same order: constant, identity, absolute value, quadratic, cubic, reciprocal, reciprocal squared, square root and cube root.

    The same idea, other ways

    As a toolbox

    Name the basic action before computing. A square rule makes x2; a reciprocal rule divides 1 by x. Knowing the action guides the domain and graph.

    As silhouettes

    The straight line copies, the V measures distance, the bowl squares, and the root curves undo powers. Each silhouette is a memory cue, checked by its formula.

    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024

    The same nine graphs a third time, in the same order: constant, identity, absolute value, quadratic, cubic, reciprocal, reciprocal squared, square root and cube root.

    NameFormulaDomainRangeOne-to-one?
    Constantf(x) = c(−∞,∞){c}No
    Identityf(x) = x(−∞,∞)(−∞,∞)Yes
    Absolute valuef(x) = |x|(−∞,∞)[0, ∞)No
    Quadraticf(x)=x2(−∞,∞)[0, ∞)No
    Cubicf(x)=x3(−∞,∞)(−∞,∞)Yes
    Reciprocalf(x)=1x(−∞,0)∪(0,∞)(−∞,0)∪(0,∞)Yes
    Reciprocal squaredf(x)=1x2(−∞,0)∪(0,∞)(0, ∞)No
    Square rootf(x)=x[0, ∞)[0, ∞)Yes
    Cube rootf(x)=x3(−∞,∞)(−∞,∞)Yes

    Part 1: Domain and range from a picture

    Imagine shining light on a graph to cast two shadows. Its shadow on the left-right input axis shows every place an input can lie. That is the domain. Its shadow on the up-down output axis shows every height the graph reaches. That is the range. Read the domain left to right and the range bottom to top. The graph of x begins at (0, 0) and continues right and up, so both shadows begin at the included zero. A picture window cuts off a drawing, so use arrows and the formula to decide whether the graph continues beyond it.

    • Domain: all horizontal input positions with a point on the graph. Read left to right.
    • Range: all vertical heights the graph reaches. Read bottom to top.
    • For x, input 0 works and every positive input works. The domain is [0, ∞).
    • For x, output 0 appears and every positive output y appears at input y2. The range is [0, ∞).
    • A graph above the horizontal axis has nonnegative outputs. That fact alone does not exclude negative inputs.
    • Use braces for separate values, such as {28, 30, 31}. Use an interval for a full stretch, such as [0, ∞).
    (0, 0)(4, 2)(9, 3)domainrange246810−11234
    The square-root graph has no points left of input zero and no heights below output zero.

    Reminder

    Reminder: Endpoint notation
    • Endpoint notation. [0, ∞) includes 0 and every positive value. {2} is one separate value, not a stretch.

    The same idea, five ways

    Say it

    Domain: left to right. Range: bottom to top.

    Write it

    The graph's two shadows show accepted inputs and produced outputs.

    In math
    • x: domain [0, ∞), range [0, ∞)
    • x2: domain (−∞, ∞), range [0, ∞)
    • For both, every output y ≥ 0 is possible.
    Like

    A map's shadow on one axis shows locations, and its shadow on the other shows heights.

    See it
    domainrange−4−224246810
    The bowl extends left and right forever, while its heights begin at zero.

    Worked example

    Read the two shadows of a square

    For f(x) = x2, read the full domain and range from the graph, then explain why the picture continues that way.

    What it asks. List allowed inputs separately from output heights.

    (−3, 9)(0, 0)(3, 9)domainrange−4−224246810
    Left-right coverage gives domain. Bottom-top coverage gives range.
    Show the steps and the answer

    The plan. Read horizontally for domain, vertically for range, then confirm with squaring.

    1. Plan. Read horizontally for domain, vertically for range, then confirm with squaring.
    2. The bowl extends to both left and right.
    3. Every square is nonnegative.
    4. Any nonnegative output y occurs at input y.
    1. The domain is (−∞,∞).The bowl extends left and right, and every real input can be squared.
    2. The range is [0,∞).The lowest height is 0, no square is negative, and input y produces each chosen y ≥ 0.
    Answer
    • Domain: (−∞, ∞)
    • range: [0, ∞)
    Double-check Input −3 gives 9, so negative inputs are accepted. Input 0 gives 0, so zero belongs to the range. No real input gives −1.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The graph of x2 stays above the input axis, so its domain is [0, ∞).
    Being above the axis describes output heights. Negative inputs still have graph points.
    ✓ Instead: Its domain is (−∞, ∞), and its range is [0, ∞).
    ✗ Not this: Use [28, 31] for the days-in-a-month range.
    That interval includes 29 and 30.5. A nonleap-year month table produces only 28, 30 or 31.
    ✓ Instead: The separate outputs form the set {28, 30, 31}.

    Tips and tricks

    • D before R, I before O, x before y: domain is input is x; range is output is y.
    • For a picture, domain is left to right; range is bottom to top.
    • The edge of the drawing window is not automatically the end of the graph.
    • As an everyday comparison: Imagine shining light on a graph to cast two shadows. Its shadow on the left-right input axis shows every place an input can lie. That is the domain. Its shadow on the up-down output axis shows every height the graph reaches. That is the range. Read the domain left to right and the range bottom to top. The graph of x begins at (0, 0) and continues right and up, so both shadows begin at the included zero. A picture window cuts off a drawing, so use arrows and the formula to decide whether the graph continues beyond it.
    • With the worked values: Input −3 gives 9, so negative inputs are accepted. Input 0 gives 0, so zero belongs to the range. No real input gives −1.

    Part 2: Constant function

    Imagine a parking lot that charges the same flat fee regardless of how long you stay. Changing the input leaves the output unchanged. A constant is a fixed number, and a constant function gives that fixed number for every input. The formula f(x) = c uses c for the chosen fixed output. It is not a new input. For the example f(x) = 2, input −2, input 0, and input 2 all produce 2. Its graph is a level horizontal line because every point has the same height. Any real input is allowed, but only one output ever appears.

    • Formula: f(x) = c, where c is a fixed real number.
    • Domain: (−∞, ∞), because the rule accepts every real input.
    • Range: {c}, because c is its only output.
    • Graph: a horizontal line at height c. The nearby graph uses c = 2.
    • Why these restrictions hold: The input x does not appear in the output c, so substituting any real number cannot create a denominator of zero or an invalid root. That gives the whole real-number domain. Since every substitution returns c, no output besides c can appear. Conversely, c really does appear, so the range is exactly the one-value set {c}. Several inputs share c, making the function fail one-to-one.
    (−2, 2)(0, 2)(2, 2)domainrange−4−224−11234
    Every input gives the same height 2.

    Reminder

    Reminder: Set versus interval
    • Set versus interval. {2} names one value. (−∞, ∞) names every real value.

    The same idea, five ways

    Say it

    f of x equals c

    Write it

    The same fixed output appears for every input.

    In math
    • f(x) = c
    • Domain: (−∞, ∞)
    • Range: {c}
    Like

    The fee stays $2 whether the input duration changes or not. Input has no effect on the fixed output.

    See it
    (−2, 2)(0, 2)(2, 2)domainrange−4−224−11234
    The example constant output 2 gives one level line.

    Worked example

    Evaluate a constant, then solve its output questions

    For f(x) = 2, evaluate f(−2), meaning find the output for input −2. Then solve f(x) = 2 and f(x) = 3, meaning find all inputs giving each requested output. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. The constant recipe ignores the input and always returns 2. Compare each requested output with 2. If it matches, every real input solves it; if it differs, no input solves it. Every sample point has height 2, so draw a horizontal line through them.

    input xoutput f(x) = 2−22−12021222↓ evaluate: input given, read the output below it↑ solve: output given, read every input above it
    The table samples show the same output for different inputs.
    1. Plan. The constant recipe ignores the input and always returns 2. Compare each requested output with 2. If it matches, every real input solves it; if it differs, no input solves it. Every sample point has height 2, so draw a horizontal line through them.
    2. The constant recipe ignores the input and always returns 2. Compare each requested output with 2. If it matches, every real input solves it; if it differs, no input solves it.
    3. Each table column gives one point: input first, output second.
    4. Every sample point has height 2, so draw a horizontal line through them.
    1. f(−2)=2.The constant rule returns 2 without changing with the input.
    2. For f(x)=2, every real x is a solution.Every allowed input gives exactly that output.
    3. For f(x)=3, there is no solution.The rule never gives output 3.
    4. Read each sample-table column as a point (input, output). Plot those points, then extend the graph in the familiar shape pictured above.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(−2)=2.
    • f(x) = 2: all real inputs x.
    • f(x) = 3: no solution.
    • Sketch: a horizontal line at height 2, extending left and right forever.
    Double-check The sample table has 2 in every output cell. The formula gives the same result for any input beyond those samples, so the all-real solution is justified by the rule.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The domain is {2} because the graph only shows height 2.
    Height measures outputs, not inputs. The horizontal line includes every real horizontal position.
    ✓ Instead: The domain is all real numbers; the range is {2}.

    Tips and tricks

    • Constant means the output stays constant. A horizontal line is the picture cue.
    • The fee stays $2 whether the input duration changes or not. Input has no effect on the fixed output.
    • Every point has vertical coordinate 2 for f(x) = 2. That puts the whole graph along one horizontal level.
    • As an everyday comparison: Imagine a parking lot that charges the same flat fee regardless of how long you stay. Changing the input leaves the output unchanged. A constant is a fixed number, and a constant function gives that fixed number for every input. The formula f(x) = c uses c for the chosen fixed output. It is not a new input. For the example f(x) = 2, input −2, input 0, and input 2 all produce 2. Its graph is a level horizontal line because every point has the same height. Any real input is allowed, but only one output ever appears.
    • With the worked values: The sample table has 2 in every output cell. The formula gives the same result for any input beyond those samples, so the all-real solution is justified by the rule.

    Part 3: Identity function

    Imagine a copier that returns exactly the number you hand it. Input 3 comes back as 3, and input −3 comes back as −3. The identity function follows that copying rule: f(x) = x. Nothing is added, multiplied, or erased. Its graph is a diagonal line through the origin, the point (0, 0), because input and output are equal at every point. Every real input is accepted, and every real output can appear by choosing that same number as the input. The output also tells you the original input, so this function is one-to-one.

    • Formula: f(x) = x.
    • Domain: (−∞, ∞), because copying accepts any real number.
    • Range: (−∞, ∞), because input y produces any desired real output y.
    • Graph: the diagonal line y = x through (0, 0).
    • Why these restrictions hold: Replacing x in f(x) = x merely writes down the selected input, so no real number is excluded. If you want any particular real output y, choose input x = y, and the rule produces it. Thus both domain and range are all real numbers. Two different inputs stay different because the rule copies each unchanged; there is no operation that could merge them into one output.
    (−3, −3)(0, 0)(3, 3)domainrange−4−224−4−224
    y = x.

    Reminder

    Reminder: Evaluating notation
    • Evaluating notation. f(−3) supplies input −3. The rule decides its output, which is −3 here.

    The same idea, five ways

    Say it

    f of x equals x

    Write it

    The output equals the input.

    In math
    • f(x) = x
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Like

    Hand in −3 and receive −3. The identity rule returns the input unchanged.

    See it
    (−3, −3)(0, 0)(3, 3)domainrange−4−224−4−224
    The same picture again: y = x.

    Worked example

    Copy an input, then recover a fractional input

    For f(x) = x, evaluate f(−3), meaning find the output for input −3. Then solve f(x) = −52, meaning find the input that produces this fractional output. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. The identity recipe returns its input unchanged. The requested output therefore equals the input, including its sign and fraction. Plot matching input and output coordinates, then draw the rising straight line through them.

    input xoutput f(x) = x−3−3−1−1001133↓ evaluate: input given, read the output below it
    The input and output entries match in every sample column.
    1. Plan. The identity recipe returns its input unchanged. The requested output therefore equals the input, including its sign and fraction. Plot matching input and output coordinates, then draw the rising straight line through them.
    2. The identity recipe returns its input unchanged. The requested output therefore equals the input, including its sign and fraction.
    3. Each table column gives one point: input first, output second.
    4. Plot matching input and output coordinates, then draw the rising straight line through them.
    1. f(−3)=−3.The identity rule copies the input.
    2. Write x=−52.The output equals the input, so the required input is the given output itself.
    3. Read each sample-table column as a point (input, output). Plot those points, then extend the graph in the familiar shape pictured above.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(−3)=−3.
    • f(x) = −52 gives x = −52.
    • Sketch: the diagonal line y = x through (0, 0), extending in both directions.
    Double-check Substituting x = −52 into the rule returns −52. The sample table likewise keeps each input unchanged.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Identity means f(x) = 1 because 1 is used in arithmetic identities.
    This function's identity action is leaving its input unchanged, rather than always returning 1.
    ✓ Instead: f(x) = x. The rule f(x) = 1 is a constant function.

    Tips and tricks

    • Identity identifies output with input: the two coordinates match.
    • Hand in −3 and receive −3. The identity rule returns the input unchanged.
    • Points such as (1, 1) and (−2, −2) have equal coordinates, so they line up on y = x.
    • As an everyday comparison: Imagine a copier that returns exactly the number you hand it. Input 3 comes back as 3, and input −3 comes back as −3. The identity function follows that copying rule: f(x) = x. Nothing is added, multiplied, or erased. Its graph is a diagonal line through the origin, the point (0, 0), because input and output are equal at every point. Every real input is accepted, and every real output can appear by choosing that same number as the input. The output also tells you the original input, so this function is one-to-one.
    • With the worked values: Substituting x = −52 into the rule returns −52. The sample table likewise keeps each input unchanged.

    Part 4: Absolute value function

    Imagine measuring how far you stand from the zero mark on a road. Three steps left and three steps right are both a distance of 3. Absolute value is this distance from zero, written |x|. The bars are part of the operation's symbol. The absolute value function f(x) = |x| accepts any real input and returns its nonnegative distance from zero. Its graph has a V shape because either direction away from zero increases the distance. Zero gives zero. An output greater than zero comes from two opposite inputs, so the full function is not one-to-one.

    • Formula: f(x) = |x|, distance from zero.
    • Domain: (−∞, ∞), because every real number has a distance from zero.
    • Range: [0, ∞), because distances are nonnegative and every such distance is reachable.
    • Graph: a V with its lowest point at (0, 0). For t > 0, solving |x| = t gives x = −t or x = t.
    • Why these restrictions hold: A number can be on either side of zero, but distance has no negative direction. For x ≥ 0, its distance is x; for x < 0, the distance is −x, which turns that negative input into a positive output. Every nonnegative output y can be produced by input y, and a negative output is impossible. These facts give all real inputs as the domain and [0, ∞) as the range.
    (0, 0)(−3, 3)(3, 3)domainrange−4−22424
    y = |x|.

    Reminder

    Reminder: Signed numbers
    • Signed numbers. −3 is a location left of zero. Its distance from zero is 3, without a minus sign.

    The same idea, five ways

    Say it

    f of x equals the absolute value of x

    Write it

    The output is the input's distance from zero.

    In math
    • f(x) = |x|
    • Domain: (−∞, ∞)
    • Range: [0, ∞)
    Like

    Inputs −3 and 3 stand on opposite sides of zero but are both 3 units away.

    See it
    (0, 0)(−3, 3)(3, 3)domainrange−4−22424
    The same picture again: y = |x|.

    Worked example

    A negative input and a two-input distance

    For f(x) = |x|, evaluate f(−1), meaning find the distance of input −1 from zero. Then solve f(x) = 52, meaning find every input that lies 52 units from zero. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. Absolute value measures distance from zero. For a positive requested distance, take both the positive and negative locations. Zero has only one location, and a negative distance is impossible. Plot the sample pairs, then draw the two straight arms meeting at zero.

    input xoutput |x|−33−11001133↓ evaluate: input given, read the output below it
    Opposite sample inputs share a distance output.
    1. Plan. Absolute value measures distance from zero. For a positive requested distance, take both the positive and negative locations. Zero has only one location, and a negative distance is impossible. Plot the sample pairs, then draw the two straight arms meeting at zero.
    2. Absolute value measures distance from zero. For a positive requested distance, take both the positive and negative locations. Zero has only one location, and a negative distance is impossible.
    3. Each table column gives one point: input first, output second.
    4. Plot the sample pairs, then draw the two straight arms meeting at zero.
    1. f(−1)=|−1|=1.−1 is one unit left of zero, and distance is nonnegative.
    2. Choose x=−52 or x=52.Moving the requested distance to the left or right gives the two possible locations.
    3. Read each sample-table column as a point (input, output). Plot those points, then extend the graph in the familiar shape pictured above.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(−1)=1.
    • f(x) = 52 gives x = −52
    • x=52.
    • Sketch: a V with its included lowest point at (0, 0), extending left and right.
    Double-check Both fractional inputs have distance 52 from zero. The sample table shows the same two-direction pattern with outputs 1 and 3.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: |x| = −2 gives x = −2 or x = 2.
    Neither input has negative distance; both have absolute value 2.
    ✓ Instead: |x| = −2 has no real solution.

    Tips and tricks

    • The V looks like two roads meeting at zero. Its height records distance.
    • Inputs −3 and 3 stand on opposite sides of zero but are both 3 units away.
    • To end 2 units from zero, you may stand at −2 or 2. The V's two arms encode those choices.
    • As an everyday comparison: Imagine measuring how far you stand from the zero mark on a road. Three steps left and three steps right are both a distance of 3. Absolute value is this distance from zero, written |x|. The bars are part of the operation's symbol. The absolute value function f(x) = |x| accepts any real input and returns its nonnegative distance from zero. Its graph has a V shape because either direction away from zero increases the distance. Zero gives zero. An output greater than zero comes from two opposite inputs, so the full function is not one-to-one.
    • With the worked values: Both fractional inputs have distance 52 from zero. The sample table shows the same two-direction pattern with outputs 1 and 3.

    Part 5: Quadratic function

    Picture square floor tiles. If a square has side length 3, it covers 3 × 3 = 9 square units. The toolkit quadratic function squares its input: f(x) = x2. Numeric inputs may be negative even though a floor tile's length cannot. Squaring a negative input still gives a positive output because two negative factors multiply to a positive. The graph is a rounded bowl with its bottom at (0, 0). It is called a parabola. You may put in any real number. You can obtain zero or a positive output, but never a negative output.

    • Formula: f(x) = x2. More generally, a quadratic function is ax2 + bx + c with fixed real coefficients and a ≠ 0; its highest power of x is 2.
    • Domain: (−∞, ∞), because any real input can be multiplied by itself.
    • Range: [0, ∞), because squares are nonnegative and y reaches each nonnegative y.
    • Graph: a parabola opening upward with lowest point (0, 0).
    • Why these restrictions hold: Squaring is multiplication of a real number by itself, which is defined for every real input. Two positive factors give a positive product, two negative factors also give a positive product, and zero squared is zero. Thus no negative output is possible. Every desired nonnegative output y is reached by x = y, so the range is all of [0, ∞). Opposite nonzero inputs share a square, causing the two sides of the bowl.
    • The domain, range, shape and examples here describe the toolkit quadratic x2. Other quadratic formulas can have a different lowest or highest height.
    (0, 0)(−3, 9)(3, 9)domainrange−4−224246810
    y=x2.

    Reminder

    Reminder: Root versus equation
    • Root versus equation. 5 is the nonnegative square root; solving x2 = 5 requires both 5 and −5.

    The same idea, five ways

    Say it

    f of x equals x squared

    Write it

    The output is the input multiplied by itself.

    In math
    • f(x)=x2
    • Domain: (−∞, ∞)
    • Range: [0, ∞)
    Like

    For positive input 3, multiplying 3 by 3 gives square area 9. The algebraic rule also accepts input −3 and returns 9.

    See it
    (0, 0)(−3, 9)(3, 9)domainrange−4−224246810
    The same picture again: y = x2.

    Worked example

    Square a negative input, then solve for a non-square output

    For f(x) = x2, evaluate f(−2), meaning square input −2. Then solve f(x) = 5, meaning find every real input whose square is 5. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. Square the whole negative input in parentheses. To solve x2 = 5, take both 5 and −5, since each squares to 5. A square cannot produce a negative output. Plot the sample pairs, then draw the smooth U through them with its bottom at zero.

    input xoutput x²−24−11001124↓ evaluate: input given, read the output below it
    Negative and positive sample inputs can have the same nonnegative square.
    1. Plan. Square the whole negative input in parentheses. To solve x2 = 5, take both 5 and −5, since each squares to 5. A square cannot produce a negative output. Plot the sample pairs, then draw the smooth U through them with its bottom at zero.
    2. Square the whole negative input in parentheses. To solve x2 = 5, take both 5 and −5, since each squares to 5. A square cannot produce a negative output.
    3. Each table column gives one point: input first, output second.
    4. Plot the sample pairs, then draw the smooth U through them with its bottom at zero.
    1. f(−2)=(−2)2=4.The input needs parentheses, and two negative factors give a positive product.
    2. Solve x2=5 by writing x=−5 or x=5.Both opposite numbers square to 5, and both lie in the all-real domain.
    3. Read each sample-table column as a point (input, output). Plot those points, then extend the graph in the familiar shape pictured above.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(−2)=4.
    • f(x) = 5 gives x = −5
    • x=5.
    • Sketch: a smooth upward bowl with its included lowest point at (0, 0), extending left and right.
    Double-check (−5)2 = 5 and (5)2 = 5. The table's inputs −2 and 2 likewise give the same square output 4.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The domain is [0, ∞) because the graph has no negative heights.
    Heights describe range; negative horizontal inputs still have points on the graph.
    ✓ Instead: Domain is (−∞, ∞), and range is [0, ∞).

    Tips and tricks

    • A bowl holds its outputs above the bottom. Check horizontal inputs separately.
    • For positive input 3, multiplying 3 by 3 gives square area 9. The algebraic rule also accepts input −3 and returns 9.
    • Squaring merges 2 and −2 into output 4. The bowl has a matching height on both sides of zero.
    • As an everyday comparison: Picture square floor tiles. If a square has side length 3, it covers 3 × 3 = 9 square units. The toolkit quadratic function squares its input: f(x) = x2. Numeric inputs may be negative even though a floor tile's length cannot. Squaring a negative input still gives a positive output because two negative factors multiply to a positive. The graph is a rounded bowl with its bottom at (0, 0). It is called a parabola. You may put in any real number. You can obtain zero or a positive output, but never a negative output.
    • With the worked values: (−5)2 = 5 and (5)2 = 5. The table's inputs −2 and 2 likewise give the same square output 4.

    Part 6: Cubic function

    Imagine making a cube from blocks. A side of 2 gives 2 × 2 × 2 = 8 blocks. The toolkit cubic function does that three-factor multiplication: f(x) = x3. Its numeric inputs can also be negative. Three copies of a negative input give a negative cube, so the sign survives. The graph rises through (0, 0), from negative inputs and outputs to positive ones. Every real input is allowed, and every real output has one cube root. These statements describe x3. A different cubic formula can turn around and share outputs.

    • Formula: f(x) = x3. More generally, a cubic function is ax3 + bx2 + cx + d with fixed real coefficients and a ≠ 0; its highest power of x is 3.
    • Domain: (−∞, ∞), because three-factor multiplication accepts any real input.
    • Range: (−∞, ∞), because input y3 produces any real output y.
    • Graph of the toolkit cubic x3: a rising bent curve through (0, 0). This toolkit rule is one-to-one; other cubics may not be.
    • Why these restrictions hold: Multiplying three real copies is defined for any real number. A negative times a negative first gives positive, and multiplying by the third negative makes negative again. Thus cubes can be negative, zero, or positive. For any desired real output y, its cube root y3 is an input producing y. Cubing keeps increasing as input increases, so two different inputs cannot share the same output, unlike squaring.
    • For all-real uniqueness, compare signs and sizes. Larger positive numbers have larger cubes. Among negative numbers, the one farther left has larger positive magnitude, whose cube becomes more negative after restoring the minus. Across zero the signs differ. Thus different inputs of x3 give different outputs.
    (−2, −8)(0, 0)(2, 8)domainrange−22−8−448
    y=x3.

    Reminder

    Reminder: Multiplying fractions
    • Multiplying fractions. 12×12×12=1×1×12×2×2=18.

    The same idea, five ways

    Say it

    f of x equals x cubed

    Write it

    The output is three copies of the input multiplied together.

    In math
    • f(x)=x3
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Like

    For positive input 2, three copies of 2 multiply to 8. That is the block-count picture of the power 3.

    See it
    (−2, −8)(0, 0)(2, 8)domainrange−22−8−448
    The same picture again: y = x3.

    Worked example

    Cube a negative number and recover an exact fractional input

    For f(x) = x3, evaluate f(−2), meaning multiply three copies of input −2. Then solve f(x) = 18, meaning find the input whose cube is 18. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. Multiply three copies of the input for evaluation. To undo a cube, find its unique real cube root. For the fraction, cube both its numerator and denominator to check. Plot the sample pairs, then draw the smooth rising S through them.

    input xoutput x³−2−8−1−1001128↓ evaluate: input given, read the output below it
    Negative cube inputs give negative outputs, while distinct samples remain distinct.
    1. Plan. Multiply three copies of the input for evaluation. To undo a cube, find its unique real cube root. For the fraction, cube both its numerator and denominator to check. Plot the sample pairs, then draw the smooth rising S through them.
    2. Multiply three copies of the input for evaluation. To undo a cube, find its unique real cube root. For the fraction, cube both its numerator and denominator to check.
    3. Each table column gives one point: input first, output second.
    4. Plot the sample pairs, then draw the smooth rising S through them.
    1. f(−2)=(−2)×(−2)×(−2)=4×(−2)=−8.The first two negatives give positive, and the third makes the product negative.
    2. Take the cube root: x=12.12 × 12 × 12 = 18, and a real output has one cube root.
    3. Read each sample-table column as a point (input, output). Plot those points, then extend the graph in the familiar shape pictured above.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(−2)=−8.
    • f(x) = 18 gives x = 12.
    • Sketch: a smooth rising bent curve through (0, 0), extending to negative and positive inputs and outputs.
    Double-check Cube the recovered fraction to get 18. Its negative counterpart cubes to −18, so it is not an extra solution.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: x3 = 8 gives x = 2 or x = −2, by the square-root pattern.
    (−2)3 is −8, so it does not give the requested positive output.
    ✓ Instead: x3 = 8 has the single real solution x = 2.
    ✗ Not this: Every cubic function is one-to-one.
    v(x) = x3 − 4x gives v(−2) = v(0) = v(2) = 0. Its graph meets the horizontal line y = 0 three times.
    ✓ Instead: The toolkit cubic x3 is one-to-one. Check any other cubic with the horizontal line test or a shared-output example.

    Tips and tricks

    • Three factors keep a negative input negative. Do not attach a ± to a cube root.
    • For positive input 2, three copies of 2 multiply to 8. That is the block-count picture of the power 3.
    • Input −2 gives −8 and input 2 gives 8. An odd number of negative factors keeps the negative sign.
    • Compare the rising x3 graph with the three shared zeros in v(x) = x3 − 4x. Their highest power matches, but their one-to-one properties do not.
    • As an everyday comparison: Imagine making a cube from blocks. A side of 2 gives 2 × 2 × 2 = 8 blocks. The toolkit cubic function does that three-factor multiplication: f(x) = x3. Its numeric inputs can also be negative. Three copies of a negative input give a negative cube, so the sign survives. The graph rises through (0, 0), from negative inputs and outputs to positive ones. Every real input is allowed, and every real output has one cube root. These statements describe x3. A different cubic formula can turn around and share outputs.
    • With the worked values: Cube the recovered fraction to get 18. Its negative counterpart cubes to −18, so it is not an extra solution.

    Part 7: Reciprocal function

    Imagine sharing one whole loaf among x equal shares. For positive x, each share has size 1 divided by x. The reciprocal function uses that division rule numerically: f(x) = 1x. It also accepts negative inputs, which give negative outputs. It cannot accept zero because division by zero is undefined, meaning it has no real value. The graph has one branch above and to the right of zero, and another below and to the left. Its output never equals zero: dividing the fixed nonzero numerator 1 by an allowed finite number cannot erase it.

    • Formula: f(x) = 1x. A reciprocal reverses a nonzero number under multiplication: x × 1x = 1.
    • Domain: (−∞, 0) ∪ (0, ∞), because denominator zero is undefined.
    • Range: (−∞, 0) ∪ (0, ∞), because the numerator 1 never gives output zero and every nonzero output is reached.
    • Graph: two separate pieces on opposite sides of both axes. They approach the axes without touching them.
    • The coordinate axes are asymptotes for this rule: as you move far along a branch, its height approaches zero; as x approaches zero, the branch grows without a finite bound. Zero itself is never an input or output.
    • Why these restrictions hold: For x ≠ 0, dividing 1 by x produces a real number, so those and only those inputs are allowed. An output of zero would require 1 = 0 × x = 0, which is impossible. Every desired nonzero output y is reached by input x = 1y, because taking a reciprocal twice returns the original number. That proves the range also consists of all nonzero real numbers.
    (−1, −1)(1, 1)(2, 0.5)domainrange−4−224−4−224
    y = 1/x.

    Reminder

    Reminder: Dividing by a fraction
    • Dividing by a fraction. 1 ÷ (−32) = 1 × (−23) = −23. Flip the divisor, then multiply.

    The same idea, five ways

    Say it

    f of x equals one over x

    Write it

    The output is one divided by the nonzero input.

    In math
    • f(x)=1x
    • Domain: (−∞, 0) ∪ (0, ∞)
    • Range: (−∞, 0) ∪ (0, ∞)
    Like

    Input 2 gives half a whole, 12. Input 4 gives a quarter, 14. More positive shares make each share smaller.

    See it
    (−1, −1)(1, 1)(2, 0.5)domainrange−4−224−4−224
    The same picture again: y = 1/x.

    Worked example

    Read a reciprocal and solve for a negative input

    For f(x) = 1x, evaluate f(2), meaning divide 1 by input 2. Then solve f(x) = −23, meaning find the nonzero input producing that output. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. For evaluation, divide 1 by the nonzero input. To solve 1x = −23, multiply both sides by nonzero x, then divide both sides by −23 to isolate x. Check that x is not zero. Plot the sample pairs as two separate curves, one in the positive-input, positive-output region and one in the negative-input, negative-output region. Neither curve touches an axis.

    input xoutput f(x)−2−0.5−1−1−0.5−20.521120.5↓ evaluate: input given, read the output below it
    These terminating decimals are exact.
    1. Plan. For evaluation, divide 1 by the nonzero input. To solve 1x = −23, multiply both sides by nonzero x, then divide both sides by −23 to isolate x. Check that x is not zero. Plot the sample pairs as two separate curves, one in the positive-input, positive-output region and one in the negative-input, negative-output region. Neither curve touches an axis.
    2. For evaluation, divide 1 by the nonzero input. To solve 1x = −23, multiply both sides by nonzero x, then divide both sides by −23 to isolate x. Check that x is not zero.
    3. Each table column gives one point: input first, output second.
    4. Plot the sample pairs as two separate curves, one in the positive-input, positive-output region and one in the negative-input, negative-output region. Neither curve touches an axis.
    1. f(2)=12.Substitution puts input 2 in the denominator.
    2. Take the reciprocal of the requested output: x=−32.Taking a nonzero reciprocal twice reverses the operation.
    3. Check that −32≠0.The input must belong to the reciprocal function's domain.
    4. Plot the six sample pairs, including (−0.5,−2), (0.5, 2) and (2, 0.5). Draw the two reciprocal pieces approaching the axes, and do not join them across x=0.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(2)=12.
    • f(x) = −23 gives x = −32.
    • Sketch: two separate pieces, lower left and upper right, approaching both axes while excluding input and output zero.
    Double-check 1 ÷ (−32) = 1 × (−23) = −23, giving the requested output. The sample table shows the same sign behavior.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: f(0) = 0 because a zero input should produce zero.
    This rule divides by its input, and 10 is undefined.
    ✓ Instead: Zero is excluded from the domain. It is also absent from the range.

    Tips and tricks

    • Reciprocal: flip a nonzero number, keep its sign, and exclude zero twice, from domain and range.
    • Input 2 gives half a whole, 12. Input 4 gives a quarter, 14. More positive shares make each share smaller.
    • A nonzero fraction flips: the reciprocal of 23 is 32. Multiplying these two numbers gives 1.
    • As an everyday comparison: Imagine sharing one whole loaf among x equal shares. For positive x, each share has size 1 divided by x. The reciprocal function uses that division rule numerically: f(x) = 1x. It also accepts negative inputs, which give negative outputs. It cannot accept zero because division by zero is undefined, meaning it has no real value. The graph has one branch above and to the right of zero, and another below and to the left. Its output never equals zero: dividing the fixed nonzero numerator 1 by an allowed finite number cannot erase it.
    • With the worked values: 1 ÷ (−32) = 1 × (−23) = −23, giving the requested output. The sample table shows the same sign behavior.

    Part 8: Reciprocal squared function

    Start with the reciprocal picture of sharing one whole, then square the input before dividing. The reciprocal squared function is f(x) = 1x2. Its denominator is positive for every nonzero input, even a negative one. That makes every output positive. Zero is still forbidden because its square is zero and division by zero has no value. The graph has two separate pieces above the horizontal axis, one on each side of the missing input zero. Opposite inputs share an output because their squares agree. You can get any positive output, but neither zero nor a negative output.

    • Formula: f(x) = 1x2. This also equals (1x)2 for x ≠ 0.
    • Domain: (−∞, 0) ∪ (0, ∞), because denominator x2 is zero exactly when x = 0.
    • Range: (0, ∞), because the nonzero square denominator makes every output strictly positive, and each positive output is reachable.
    • Graph: two separate pieces above the horizontal axis, with matching heights at opposite inputs.
    • Why these restrictions hold: For x ≠ 0, x2 is positive, so 1x2 is positive and defined. At x = 0 the denominator is zero, which excludes that input. To produce any chosen positive output y, set x2 = 1y and choose x = 1y, which is nonzero. Its opposite works too. This proves the entire positive range while explaining the graph's matching left and right separate pieces.
    (−1, 1)(1, 1)(2, 0.25)domainrange−4−22424
    y = 1/x2.

    Reminder

    Reminder: Solving a squared equation
    • Solving a squared equation. x2 = 14 gives x = ±12, since both opposite fractions square to 14.

    The same idea, five ways

    Say it

    f of x equals one over x squared

    Write it

    The output is one divided by the nonzero input's square.

    In math
    • f(x)=1x2
    • Domain: (−∞, 0) ∪ (0, ∞)
    • Range: (0, ∞)
    Like

    Input −2 first squares to 4, then gives 14. Squaring removes the minus before division.

    See it
    (−1, 1)(1, 1)(2, 0.25)domainrange−4−22424
    The same picture again: y = 1/x2.

    Worked example

    A negative input and two recovered fractional inputs

    For f(x) = 1x2, evaluate f(−2), meaning square input −2 and divide 1 by its square. Then solve f(x) = 4, meaning find all nonzero inputs giving output 4. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. Square the input before dividing 1 by it. To solve 1x2 = 4, multiply both sides by the nonzero square x2 to get 1 = 4x2. Divide by 4, then keep both inputs whose square is 14. Check both are nonzero. Plot the sample pairs in two separate curves above zero. Each curve approaches both axes without touching them.

    input xoutput f(x)−20.25−11−0.540.541120.25↓ evaluate: input given, read the output below it↑ solve: output given, read every input above it
    The exact decimals 0.5 and 0.25 mean 12 and 14.
    1. Plan. Square the input before dividing 1 by it. To solve 1x2 = 4, multiply both sides by the nonzero square x2 to get 1 = 4x2. Divide by 4, then keep both inputs whose square is 14. Check both are nonzero. Plot the sample pairs in two separate curves above zero. Each curve approaches both axes without touching them.
    2. Square the input before dividing 1 by it. To solve 1x2 = 4, multiply both sides by the nonzero square x2 to get 1 = 4x2. Divide by 4, then keep both inputs whose square is 14. Check both are nonzero.
    3. Each table column gives one point: input first, output second.
    4. Plot the sample pairs in two separate curves above zero. Each curve approaches both axes without touching them.
    1. f(−2)=1(−2)2=14.The denominator is the square of the whole negative input.
    2. Rewrite 1x2=4 as 1=4x2, then x2=14.Multiplying by the nonzero denominator x2 and dividing by 4 preserve the equation.
    3. Take both square candidates: x=−12 or x=12. Both are nonzero.Both opposite inputs square to 14 and meet the domain restriction.
    4. Plot the six pairs, including (−0.5,4), (0.5, 4) and (2, 0.25). Draw two pieces above zero, approaching the axes. Do not include or cross input zero.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(−2)=14.
    • f(x) = 4 gives x = −12
    • x=12.
    • Sketch: two matching pieces above the horizontal axis, approaching both axes while excluding input and output zero.
    Double-check Each candidate has square 14, and 1 ÷ 14 = 4. The sample table also gives equal outputs to opposite inputs.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The range includes zero because the separate pieces get close to it.
    Approaching a height does not mean reaching it. A nonzero numerator divided by a finite positive denominator stays positive.
    ✓ Instead: The range is (0, ∞), with a parenthesis at zero.

    Tips and tricks

    • Squared denominator means positive outputs on both sides. Keep zero out of the input and output sets.
    • Input −2 first squares to 4, then gives 14. Squaring removes the minus before division.
    • Inputs −1 and 1 both give 1. The graph repeats heights on the left and right, always above zero.
    • As an everyday comparison: Start with the reciprocal picture of sharing one whole, then square the input before dividing. The reciprocal squared function is f(x) = 1x2. Its denominator is positive for every nonzero input, even a negative one. That makes every output positive. Zero is still forbidden because its square is zero and division by zero has no value. The graph has two separate pieces above the horizontal axis, one on each side of the missing input zero. Opposite inputs share an output because their squares agree. You can get any positive output, but neither zero nor a negative output.
    • With the worked values: Each candidate has square 14, and 1 ÷ 14 = 4. The sample table also gives equal outputs to opposite inputs.

    Part 9: Square root function

    Imagine knowing the area of a square tile and asking for its side length. Area 9 gives side 3 because 32 = 9. The square root function f(x) = x asks for the nonnegative number whose square is the input. The root symbol selects that nonnegative answer. A negative input cannot be the square of a real number, so it is excluded. The graph begins at the included point (0, 0) and extends rightward and upward. Every nonnegative input works, and every nonnegative output can appear. This graph is one-to-one because each output squares back to one input.

    • Formula: f(x) = x, the nonnegative real square root.
    • Domain: [0, ∞). A real square cannot be negative, so negative inputs fail. Every nonnegative input has a nonnegative square root, including input 0 with output 0. Thus all and only nonnegative inputs work.
    • Range: [0, ∞), because the symbol chooses the nonnegative root and input y2 reaches each y ≥ 0.
    • Graph: starts at (0, 0) and curves right and up. It is one-to-one.
    • Why these restrictions hold: Every real square is nonnegative, so no real number can square to a negative input. For any input x ≥ 0, the nonnegative square root exists and is the output chosen by the symbol x. To reach any desired output y ≥ 0, choose input y2: y2 = y for nonnegative y. These observations show that both domain and range are [0, ∞), including zero.
    (0, 0)(4, 2)(9, 3)domainrange246810−11234
    The same picture again: y = x.

    Reminder

    Reminder: Squaring a fraction
    • Squaring a fraction. (32)2 = 3222 = 94. Square both the numerator and denominator.

    The same idea, five ways

    Say it

    f of x equals the square root of x

    Write it

    The output is the nonnegative number whose square is the input.

    In math
    • f(x)=x
    • Domain: [0, ∞)
    • Range: [0, ∞)
    Like

    Input area 4 returns side 2. The side length picture reminds you that the chosen root is nonnegative.

    See it
    (0, 0)(4, 2)(9, 3)domainrange246810−11234
    The same picture a third time: y = x.

    Worked example

    Take a root, then recover a fractional input

    For f(x) = x, evaluate f(4), meaning find the nonnegative number whose square is input 4. Then solve f(x) = 32, meaning find the input whose chosen square-root output is 32. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. Compute the nonnegative square root for evaluation. To undo the nonnegative root output 32, square that whole fraction. Check the resulting input in the original square-root rule. Plot the sample pairs starting at (0, 0), then draw the smooth rising curve extending rightward.

    input xoutput f(x)00114293↓ evaluate: input given, read the output below it
    Perfect-square sample inputs give their chosen nonnegative roots.
    1. Plan. Compute the nonnegative square root for evaluation. To undo the nonnegative root output 32, square that whole fraction. Check the resulting input in the original square-root rule. Plot the sample pairs starting at (0, 0), then draw the smooth rising curve extending rightward.
    2. Compute the nonnegative square root for evaluation. To undo the nonnegative root output 32, square that whole fraction. Check the resulting input in the original square-root rule.
    3. Each table column gives one point: input first, output second.
    4. Plot the sample pairs starting at (0, 0), then draw the smooth rising curve extending rightward.
    1. f(4)=4=2.2 is nonnegative and 22 = 4.
    2. Square both sides of x=32 to get x=94.Squaring the nonnegative root recovers its input, and (32)2 = 94.
    3. Check x=94≥0.The square-root domain allows only nonnegative inputs.
    4. Read each sample-table column as a point (input, output). Plot those points, then extend the graph in the familiar shape pictured above.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(4) = 2.
    • f(x) = 32 gives x = 94.
    • Sketch: a curve starting at included (0, 0) and extending right and up.
    Double-check 94 = 32 because 32 is nonnegative and its square is 94. The sample table includes the root pairs 4 with 2 and 9 with 3.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: 4=±2.
    The root symbol chooses the nonnegative answer; ±2 answers the different equation t2 = 4.
    ✓ Instead: 4 = 2. The square-root function has one output for that input.

    Tips and tricks

    • Square root: right and up from zero. Keep zero in both domain and range with brackets.
    • Input area 4 returns side 2. The side length picture reminds you that the chosen root is nonnegative.
    • 9 returns 3, while solving t2 = 9 asks for both 3 and −3. The root symbol and the equation ask different questions.
    • As an everyday comparison: Imagine knowing the area of a square tile and asking for its side length. Area 9 gives side 3 because 32 = 9. The square root function f(x) = x asks for the nonnegative number whose square is the input. The root symbol selects that nonnegative answer. A negative input cannot be the square of a real number, so it is excluded. The graph begins at the included point (0, 0) and extends rightward and upward. Every nonnegative input works, and every nonnegative output can appear. This graph is one-to-one because each output squares back to one input.
    • With the worked values: 94 = 32 because 32 is nonnegative and its square is 94. The sample table includes the root pairs 4 with 2 and 9 with 3.

    Part 10: Cube root function

    Imagine knowing how many blocks fill a cube and asking for its side count. A volume of 8 gives side 2 because 23 = 8. The cube root function reverses cubing: f(x) = x3. As an algebraic rule, it accepts negative inputs too. Input −8 gives −2 because three copies of −2 multiply to −8. Its graph bends through zero, extending to negative and positive inputs and outputs. The curve has a different bend from the cubic graph, but their rules undo each other. Every real input has one real cube root, so every real input is allowed.

    • Formula: f(x) = x3, the unique real cube root.
    • Domain: (−∞, ∞), because every real number has a real cube root.
    • Range: (−∞, ∞), because input y3 produces any desired real output y.
    • Graph: a rising cube-root curve through (0, 0), with negative and positive values. It is one-to-one because cubing an output recovers its one input.
    • Why these restrictions hold: Cubing produces negative, zero, and positive values without repeating an output. Reversing that operation therefore supplies exactly one real cube root for any real input. Every real output y is reached by choosing input y3, since ∛(y3) = y. That proves both the all-real domain and all-real range. A negative cube root is allowed because three negative factors have a negative product, unlike two factors in a square.
    (−8, −2)(0, 0)(8, 2)domainrange−8−448−22
    y=x3.

    Reminder

    Reminder: Cube roots
    • Cube roots. 273 = 3 because 33 = 27. Check a cube root by cubing the answer.

    The same idea, five ways

    Say it

    f of x equals the cube root of x

    Write it

    The output is the one real number whose cube is the input.

    In math
    • f(x)=x3
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Like

    Input 8 returns 2 because 2 × 2 × 2 = 8. Cubing checks what the cube root returns.

    See it
    (−8, −2)(0, 0)(8, 2)domainrange−8−448−22
    The same picture again: y = x3.

    Worked example

    Root a negative cube and recover a fractional cube

    For f(x) = x3, evaluate f(−8), meaning find the number whose cube is input −8. Then solve f(x) = −12, meaning find the input that has cube-root output −12. Then sketch the rule from its sample table.

    What it asks. Find the output at the given input, recover every input giving each requested output, and sketch the rule from the sample pairs.

    Show the steps and the answer

    The plan. A real cube root keeps the sign of its input. To recover the input from output −12, cube that whole output: multiply three copies of its numerator and three copies of its denominator. Plot the sample pairs, then draw the smooth rising curve through zero, continuing in both directions.

    input xoutput ∛x−8−2−1−1001182↓ evaluate: input given, read the output below it
    Perfect-cube samples have one real root each, with matching signs.
    1. Plan. A real cube root keeps the sign of its input. To recover the input from output −12, cube that whole output: multiply three copies of its numerator and three copies of its denominator. Plot the sample pairs, then draw the smooth rising curve through zero, continuing in both directions.
    2. A real cube root keeps the sign of its input. To recover the input from output −12, cube that whole output: multiply three copies of its numerator and three copies of its denominator.
    3. Each table column gives one point: input first, output second.
    4. Plot the sample pairs, then draw the smooth rising curve through zero, continuing in both directions.
    1. f(−8)=−2.(−2)3 = −8, so −2 is the real cube root.
    2. Cube the given output to find x=(−12)3=−18.Cubing undoes the cube root, and three negative fraction factors give a negative product.
    3. Read each sample-table column as a point (input, output). Plot those points, then extend the graph in the familiar shape pictured above.Each column is an ordered pair. The rule's shape shows how the points fit together, while its input restrictions show where the graph must stop or split.
    Answer
    • f(−8)=−2.
    • f(x) = −12 gives x = −18.
    • Sketch: a smooth rising root curve through (0, 0), extending to negative and positive inputs and outputs.
    Double-check The cube of −12 is −18, so ∛(−18) = −12. The sample table likewise pairs −8 with −2.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: ∛(−8) has no real value because roots reject negative numbers.
    That restriction applies to square roots. A negative real number can have a negative cube.
    ✓ Instead: ∛(−8) = −2 because (−2)3 = −8.

    Tips and tricks

    • Cube root undoes three factors. Three negative factors are negative, so negative inputs are allowed.
    • Input 8 returns 2 because 2 × 2 × 2 = 8. Cubing checks what the cube root returns.
    • Input −8 returns −2. The cube root can travel left and down, whereas the square-root graph begins at zero and stays right and up.
    • As an everyday comparison: Imagine knowing how many blocks fill a cube and asking for its side count. A volume of 8 gives side 2 because 23 = 8. The cube root function reverses cubing: f(x) = x3. As an algebraic rule, it accepts negative inputs too. Input −8 gives −2 because three copies of −2 multiply to −8. Its graph bends through zero, extending to negative and positive inputs and outputs. The curve has a different bend from the cubic graph, but their rules undo each other. Every real input has one real cube root, so every real input is allowed.
    • With the worked values: The cube of −12 is −18, so ∛(−18) = −12. The sample table likewise pairs −8 with −2.

    Part 11: One-page reference

    Think of your exam preparation as packing a small travel bag. Keep the few things you need constantly within reach. Rebuild facts that follow quickly from an operation, and save the full formula table as a reference for study. In a closed-book exam, the reference helps you practice beforehand rather than serving as something you can consult during the exam. Know what a function promises and which direction a question asks you to read. Rebuild domains and ranges by asking whether the operation accepts an input and can reach an output. Use the silhouettes as memory cues, then confirm them with a number.

    • Function: each allowed input has one output. One-to-one: each output actually produced has one input. A vertical line is one input. A horizontal line is one output. Check function status first.
    • Evaluate f(3): input 3 is given; find its output. Solve f(x) = 3: output 3 is given; find every input. In a table with inputs above outputs, read down to evaluate and up from every matching output to solve.
    • Constant: f(x) = c. Domain (−∞, ∞). Range {c}.
    • Identity: f(x) = x. Domain (−∞, ∞). Range (−∞, ∞).
    • Absolute value: f(x) = |x|. Domain (−∞, ∞). Range [0, ∞).
    • Quadratic: f(x) = x2. Domain (−∞, ∞). Range [0, ∞).
    • Cubic: f(x) = x3. Domain (−∞, ∞). Range (−∞, ∞).
    • Reciprocal: f(x) = 1x. Domain (−∞, 0) ∪ (0, ∞). Range (−∞, 0) ∪ (0, ∞).
    • Reciprocal squared: f(x) = 1x2. Domain (−∞, 0) ∪ (0, ∞). Range (0, ∞).
    • Square root: f(x) = x. Domain [0, ∞). Range [0, ∞).
    • Cube root: f(x) = x3. Domain (−∞, ∞). Range (−∞, ∞).
    • Rebuild restrictions: division excludes zero denominators; real square roots require nonnegative insides. Domain means inputs; range means outputs actually produced. Brackets include finite endpoints; parentheses exclude them. Infinity always uses parentheses.
    • Expand: (a + h)2 = a2 + 2ah + h2. Subtract a whole output by changing every sign. Factor a numerator before canceling a shared nonzero factor.
    • Difference quotient: f(x+h)−f(x)h, or f(a+h)−f(a)h when the starting input is named a. Keep h ≠ 0. Compute both outputs, subtract the whole old output, simplify, then divide by the nonzero step h. The result is the average output change for each 1 input step.
    • Circle area: A = πr2, r > 0. Recover radius with r = Aπ. Keep the positive radius and leave π written for exactness.
    • Why rebuild: Memorizing every table entry separately hides connections and uses study time poorly. One rule explains several facts: a denominator cannot be zero, a square is nonnegative, and a cube keeps the sign. Rebuilding these restrictions from their operations guards against mixing up domain and range. A compact reference collects the formulas for practice, while the definitions and question directions need to be available immediately for every problem.
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024

    The same nine graphs for the 4th time, in the same order: constant, identity, absolute value, quadratic, cubic, reciprocal, reciprocal squared, square root and cube root.

    Reminder

    Reminder: Domain versus range
    • Domain versus range. Domain is what goes in; range is what comes out. For x2, negative inputs are allowed, but negative outputs are not.

    The same idea, five ways

    Say it

    Domain is input, and range is output

    Write it

    Check what can go in separately from what can come out.

    In math
    • 1x2:x≠0
    • Domain (−∞, 0) ∪ (0, ∞)
    • Range (0, ∞)
    Like

    Check a machine's accepted buttons separately from its delivered snacks.

    See it
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024
    −4−2024−4−2024

    The same nine graphs for the 5th time, in the same order: constant, identity, absolute value, quadratic, cubic, reciprocal, reciprocal squared, square root and cube root.

    Worked example

    Use the reference habits on a square and a reciprocal square

    First evaluate the quadratic toolkit rule at input −1, meaning find its output. Then rebuild the domain and range of f(x) = 1x2, meaning list all accepted real inputs and all outputs the rule can reach.

    What it asks. Evaluate the square rule, then rebuild both restrictions for reciprocal squared.

    Show the steps and the answer

    The plan. Square −1. For 1x2, test zero and signs, then show how any positive output can be reached.

    domainrange−4−224−11234
    The reference habits rebuild the missing input zero and the strictly positive output heights.
    1. Plan. Square −1. For 1x2, test zero and signs, then show how any positive output can be reached.
    2. Zero makes the denominator zero.
    3. Every nonzero square is positive.
    4. For any desired y > 0, input 1y returns y.
    1. The quadratic rule is x2, so the output at −1 is (−1)2=1.Recognizing the formula identifies the action before calculation.
    2. For 1x2, exclude x=0 and allow every other real input.The denominator x2 is zero exactly at input zero.
    3. The range is every positive real number, with zero excluded.The reciprocal of a nonzero square is positive, and for any y > 0, input 1y returns y.
    Answer
    • Quadratic output at input −1: 1.
    • Reciprocal squared domain: (−∞, 0) ∪ (0, ∞).
    • Reciprocal squared range: (0, ∞).
    Double-check The formula gives 1 at input 1 and 14 at input 2, always positive. Input 0 would make 10, which is undefined. The construction for arbitrary y > 0 confirms the full range beyond those samples.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Memorize [0, ∞) for every function involving a square or root.
    The location of the square or root matters. x2 accepts negative inputs, while x does not; 1x2 also excludes zero.
    ✓ Instead: Read the formula's operation and rebuild its input and output restrictions.

    Tips and tricks

    • For each toolkit shape, say formula, domain reason, range reason aloud before doing a sample calculation.
    • Keep definitions and search directions ready immediately. Rebuild operation restrictions when needed. Collect the nine formulas and sketches on the study reference.
    • For 1x2, denominator zero excludes input zero, and a nonzero square is positive. You recover its domain and range from the formula without reciting a separate row.
    • As an everyday comparison: Think of your exam preparation as packing a small travel bag. Keep the few things you need constantly within reach. Rebuild facts that follow quickly from an operation, and save the full formula table as a reference for study. In a closed-book exam, the reference helps you practice beforehand rather than serving as something you can consult during the exam. Know what a function promises and which direction a question asks you to read. Rebuild domains and ranges by asking whether the operation accepts an input and can reach an output. Use the silhouettes as memory cues, then confirm them with a number.
    • With the worked values: The formula gives 1 at input 1 and 14 at input 2, always positive. Input 0 would make 10, which is undefined. The construction for arbitrary y > 0 confirms the full range beyond those samples.

    Part 12: Know cold

    Keep these decisions available from memory. They tell you what kind of question you are answering before you begin calculating. Each memory cue appears with a worked example and a counterexample in its own lesson.

    • Know cold: a function gives one output per accepted input. Memory cue: one arrow OUT of each input. See the function lesson.
    • Know cold: in f(3), 3 is the input; in f(x) = 3, 3 is the output. Memory cue: inside names the input, equals names the output. See function notation.
    • Know cold: a vertical line is one input; a horizontal line is one output. Use the vertical test for function status first, then the horizontal test for one-to-one.
    • Know cold: wrap the whole substituted input in parentheses. Memory cue: the input's seat belt.
    • Know cold: the difference quotient is new output minus old output, divided by the step h. Keep h ≠ 0. See the difference-quotient lesson.
    • Know cold: domain is input and range is output. Memory cue: D before R, I before O, x before y.
    • Know cold: the nine names and silhouettes. Memory cue: flat fee line, copy line, distance V, square bowl, cube bend, reciprocal two pieces, reciprocal-square two upper pieces, and roots undo powers.

    One arrow OUT per input

    Inside: input; equals: output

    Vertical: one input; horizontal: one output

    New output − old output, over step h

    The same idea, five ways

    Say it

    One output for each input; inside names the input, and equals names the output.

    Write it

    Keep the function definition and the direction of each question available from memory.

    In math
    • f(3): input 3, output wanted
    • f(x) = 3: output 3, inputs wanted
    • f(x+h)−f(x)h,h≠0
    • x = 2: one input position
    • y = 4: one output height
    Like

    Keep the tools you use constantly in the outside pocket of a study bag.

    See it

    One arrow OUT per input

    Inside: input; equals: output

    Vertical: one input; horizontal: one output

    New output − old output, over step h

    Worked example

    Use a known input

    For f(x) = x + 1, find f(2). This asks for the output at input 2.

    What it asks. Find the output when the input is 2.

    Show the steps and the answer

    The plan. Replace x by 2, then add 1.

    2Add 1inputoutput3
    The known input 2 gives output 3.
    1. Plan. Replace x by 2, then add 1.
    2. The input is inside the parentheses.
    3. 2 + 1 gives the output.
    1. Replace x by 2: f(2)=2+1.The 2 inside parentheses is the given input.
    2. Compute 2+1=3.The rule adds 1 to the input.
    Answer
    f(2) = 3.
    Double-check The pair (2, 3) records the same input and output.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: In f(3), the output is necessarily 3.
    The inside number is the input; the rule determines the output.
    ✓ Instead: Apply f to input 3 to find its output.

    Tips and tricks

    • Cover the cue, explain it aloud, then use it on one changed input.
    • Cover the answer, explain one decision aloud, and then repeat it with a changed input.
    • Instead of memorizing the domain of x, recall that real squares cannot be negative.
    • As an everyday comparison: Keep these decisions available from memory. They tell you what kind of question you are answering before you begin calculating. Each memory cue appears with a worked example and a counterexample in its own lesson.
    • With the worked values: The pair (2, 3) records the same input and output.

    Part 13: Understand, then rebuild when needed

    Practice the operations that produce an answer. You do not need to memorize each finished expansion, factorization or domain. Rebuild them from multiplication, division and the meaning of a root. The refreshers teach these moves before the later lessons ask you to use them.

    • Understand, then rebuild: expand a squared sum by multiplying two copies. (x + h)2 = x2 + 2xh + h2.
    • Understand, then rebuild: find factor pairs by product and sum, then distribute to check.
    • Understand, then rebuild: isolate the requested output with equal operations on both sides.
    • Understand, then rebuild: compute a difference quotient by substituting x + h, subtracting the whole old output, simplifying and dividing by nonzero h.
    • Understand, then rebuild: sketch toolkit graphs from helpful points and their silhouettes, then use operation restrictions to confirm their full domains and ranges.
    12124212
    An area model with sides 1 + 2 and 1 + 2.

    The same idea, five ways

    Say it

    The whole sum a plus h, squared, equals a squared plus two a h plus h squared.

    Write it

    Rebuild expansions and factors by multiplication instead of guessing the finished expression.

    In math
    • (a+h)2=(a+h)(a+h)
    • (a + h)2 = a2 + 2ah + h2
    • x2+2x−3=(x+3)(x−1)
    • h(2x+h)h=2x+h,h≠0
    Like

    Use a recipe to rebuild a finished dish rather than memorize every ingredient total.

    See it
    12124212
    The same picture again: An area model with sides 1 + 2 and 1 + 2.

    Worked example

    Rebuild a squared input

    For f(x) = x2, evaluate f(1 + 2). This asks you to use the whole sum as input.

    What it asks. Evaluate the square rule at the entire input 1 + 2.

    Show the steps and the answer

    The plan. Compute the complete input first, then square it.

    12124212
    The same picture a third time: An area model with sides 1 + 2 and 1 + 2.
    1. Plan. Compute the complete input first, then square it.
    2. 1 + 2 = 3.
    3. The square uses two complete copies of 3.
    1. Add 1+2=3.The complete input is the sum in parentheses.
    2. Square that input: f(3)=3×3=9.The rule squares the input.
    Answer
    f(1 + 2) = 9.
    Double-check Expanding gives 12 + 2 × 1 × 2 + 22 = 1 + 4 + 4 = 9.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: (a + h)2 = a2 + h2 because each term gets a square.
    Squaring multiplies two complete copies and creates two cross products.
    ✓ Instead: (a + h)2 = a2 + 2ah + h2.

    Tips and tricks

    • Multiply two copies once so you can rebuild the middle term instead of guessing.
    • Cover the answer, explain one decision aloud, and then repeat it with a changed input.
    • Instead of memorizing the domain of x, recall that real squares cannot be negative.
    • As an everyday comparison: Practice the operations that produce an answer. You do not need to memorize each finished expansion, factorization or domain. Rebuild them from multiplication, division and the meaning of a root. The refreshers teach these moves before the later lessons ask you to use them.
    • With the worked values: Expanding gives 12 + 2 × 1 × 2 + 22 = 1 + 4 + 4 = 9.

    Part 14: Put on the cheat sheet, or look it up

    The final lesson gathers a short printable reference with the toolkit formulas and the main procedures. Use it during study and when reference material is allowed. For a closed-book exam, close it and practice rebuilding each restriction from the rule's meaning.

    • Put on the cheat sheet, or look it up during study: the nine-formula table above, with domain, range, one-to-one status and each graph silhouette.
    • Put on the cheat sheet, or look it up during study: f(x+h)−f(x)h, h ≠ 0, and its step-by-step procedure. Know the meaning from memory for a closed-book exam.
    • Put on the cheat sheet, or look it up during study: interval brackets include finite endpoints; parentheses exclude them; infinity always takes parentheses.
    • Put on the cheat sheet, or look it up during study: circle area A = πr2 for r > 0 and the reverse radius rule r = Aπ.
    • A closed-book exam does not allow this reference at the desk. Practice with it, then cover it and rebuild the facts from the operations.
    no square ever lands below 0(−3, 9)(3, 9)(0, 0)−33−49
    The graph of y = x2: no square lands below 0.

    The same idea, five ways

    Say it

    The square root of four is two; no real number squares to negative four.

    Write it

    Use a study reference to check an operation’s restrictions, then explain those restrictions with the reference closed.

    In math
    • 4=2
    • x ≥ 0
    • [0, ∞)
    • −4: no real value
    • A=πr2,r>0
    • r=Aπ
    Like

    A map checks the route during practice; afterward you explain the route from memory.

    See it
    no square ever lands below 0(−3, 9)(3, 9)(0, 0)−33−49
    The same picture again: The graph of y = x2: no square lands below 0.

    Worked example

    Rebuild a square-root restriction

    Why does f(x) = x accept 4 but reject −4 as a real input?

    What it asks. Decide which of two inputs has a real square-root output.

    Show the steps and the answer

    The plan. Check whether a real number can square to each input.

    no square ever lands below 0(−3, 9)(3, 9)(0, 0)−33−49
    The same picture a third time: The graph of y = x2: no square lands below 0.
    1. Plan. Check whether a real number can square to each input.
    2. 22=4.
    3. Every real square is nonnegative.
    1. Find 4=2.22 = 4 and the principal square root chooses the nonnegative root.
    2. Try to find a real number squaring to −4.Every real square is nonnegative, so none can square to −4.
    Answer
    • 4 is accepted with output 2.
    • −4 has no real output.
    Double-check The square graph stays on or above zero, agreeing with the accepted input restriction.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Memorize [0, ∞) without knowing why it is the square-root domain.
    A changed root formula needs a changed condition on its inside expression.
    ✓ Instead: Require the inside of a real square root to be nonnegative.

    Tips and tricks

    • Use the reference to check your reasoning, then redo the example with the reference closed.
    • Cover the answer, explain one decision aloud, and then repeat it with a changed input.
    • Instead of memorizing the domain of x, recall that real squares cannot be negative.
    • As an everyday comparison: The final lesson gathers a short printable reference with the toolkit formulas and the main procedures. Use it during study and when reference material is allowed. For a closed-book exam, close it and practice rebuilding each restriction from the rule's meaning.
    • With the worked values: The square graph stays on or above zero, agreeing with the accepted input restriction.

    5 How

    1. Identify the operation in the formula and match its familiar graph shape.
    2. Check which real inputs the operation accepts. These make its domain.
    3. Ask which outputs it can actually produce. These make its range.
    4. Evaluate one small input with parentheses, then check the result against the graph or sample table.
    5. When an output is given, reverse the operation and check every candidate against the domain.

    Sketch from helpful points, then read the shadows

    1
    Does the formula divide by its input or its square?
    YesSkip zero, make a sketch on each side of zero, and keep the two pieces separate.
    NoCheck whether it is a root.
    ↓
    2
    Is it square root?
    YesStart at (0, 0), use nonnegative perfect-square inputs, and extend right and up.
    NoFor cube root use signed perfect cubes; for other toolkit rules use the five small inputs.
    ↓
    3
    Does the sketch lie above the horizontal axis?
    YesThat describes output heights, so it helps find range. Still inspect left-right inputs for domain.
    NoRead both graph shadows separately.
    1. Choose inputs that make the calculation clear. For most rules use −2, −1, 0, 1 and 2.
    2. For square root, use 0, 1, 4 and 9. For cube root, use −8, −1, 0, 1 and 8.
    3. For the two reciprocal rules, skip zero and use −2, −1, −12, 12, 1 and 2.
    4. Calculate each output, write the input first in (x, y), and plot the points.
    5. Use the rule's familiar silhouette to connect the points. Keep reciprocal graphs in separate pieces across the forbidden zero.
    6. Read domain left to right as the graph's shadow on the input axis. Read range bottom to top as its shadow on the output axis.
    7. Confirm each full shadow from the operation, because a few plotted samples alone cannot show every real input or output.

    6 Worked example

    Worked example

    The constant function k(x) = -2: formula, graph, domain, range and table

    The constant function k(x) = -2 is one of the nine toolkit functions. The figure shows its graph: a horizontal line 2 units below the x-axis that passes through the marked points (-4, -2), (0, -2) and (3, -2).
    (a) Say what the formula does with its input, and name the shape of the graph.
    (b) State the domain of k.
    (c) State the range of k.
    (d) Evaluate k(-1), writing the input in parentheses. Then complete a sample table for x = -1, 0 and 2, and check it against the graph.
    (e) Solve k(x) = -2. Then solve k(x) = 2.

    (-4, -2)(0, -2)(3, -2)−6−4−2246−4−224
    Graph of the constant function k(x) = -2.
    Show the steps and the answer
    1. Identify the operation. The right side of k(x)=-2 contains no x, so k does nothing with its input and always returns -2. A constant function graphs as a horizontal line. Here it is the line y=-2, 2 units below the x-axis. This matches the figure, where every marked point, (-4,-2),(0,-2) and (3,-2), has y-coordinate -2.Points that all share one y-coordinate lie on a single horizontal line, so a rule that gives every input the same output must graph as a horizontal line.
    2. Find the domain. The formula has no division by x and no square root of x, so no real input can make it undefined. Domain: all real numbers, (-∞,∞).Only operations such as dividing by zero or taking the square root of a negative number shut inputs out. k uses neither, and its graph runs without a break across the whole x-axis.
    3. Find the range. The only output k ever produces is -2. Range: {-2}, the single number -2. It is not an interval, and it is not all real numbers.The range is the set of outputs actually produced, and every point on the graph sits at height -2.
    4. Evaluate with parentheses. Replace x with (-1) in k(x)=-2. There is no x on the right side, so nothing changes and k(-1)=-2. In the same way k(0)=-2 and k(2)=-2, which gives the sample table x: -1, 0, 2 and k(x): -2,-2,-2. Check: (0,-2) is a marked point. (-1,-2) and (2,-2) lie on the same horizontal line, between the marked points, at height -2.Parentheses keep the input's sign attached in any formula. Here they show that the output does not depend on the input. Each table pair (x, k(x)) is a point that must lie on the graph.
    5. Reverse for the output -2. The equation k(x)=-2 says -2=-2, which is true whatever x is. Every real number is a candidate, and every candidate is in the domain, so every real number is a solution.Solving k(x) = -2 asks which inputs produce -2. All inputs produce -2, and on the graph the whole line sits at height -2.
    6. Reverse for the output 2. The equation k(x)=2 says -2=2, which is false for every x. There are no candidates, so the equation has no solution.2 is not in the range {-2}. On the graph, the horizontal line y = 2 lies 4 units above the graph of k and never meets it.
    Answer
    • (a) k ignores its input and always outputs -2
    • its graph is the horizontal line y = -2. (b) Domain: all real numbers, (-∞, ∞). (c) Range: {-2}, only the value -2. (d) k(-1) = -2. The table gives k(-1) = -2, k(0) = -2 and k(2) = -2, and each of these points lies on the graph. (e) k(x) = -2 is true for every real number x
    • k(x) = 2 has no solution.
    Double-check Test inputs not used above: k(10) = -2 and k(-12) = -2. Both 10 and -12 solve k(x) = -2, as 'every real number' predicts, and both outputs are -2, the one value in the range. The graph agrees. The line continues left and right without end, so every real input is used. Each of its points has height -2, so the line y = 2 never meets it and k(x) = 2 has no solution.

    Work to write

    1. k(x) = -2 gives the output -2 for every input; its graph is the horizontal line y = -2
    2. Domain: all real numbers, (-∞, ∞)
    3. Range: {-2} (only the value -2)
    4. k(-1) = -2
    5. Table: x = -1, 0, 2 gives k(x) = -2, -2, -2; each point lies on the line
    6. k(x) = -2: every real number x is a solution
    7. k(x) = 2: no solution, because 2 is not in the range

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: A small sample table gives the entire domain of a toolkit function.
    These formulas accept many inputs beyond the few listed samples.
    ✓ Instead: Use the formula's restrictions for the full domain, and use the table to practice values.
    ✗ Not this: Any curve that stays above the horizontal axis has domain [0, ∞).
    Being above the axis describes output heights, which are the range, rather than input positions.
    ✓ Instead: Read the domain horizontally and the range vertically, then confirm both from the rule.

    Tips and tricks

    • Pair each name with an action and a silhouette: copy line, distance V, square bowl, cube bend, reciprocal separate pieces, roots undo powers.
    • Zero is a separate check: accepted as input, reached as output, both, or neither.
    • For a closed-book exam, know the nine names and silhouettes. Rebuild the interval restrictions from the operations in ten seconds.
    • Sketch from a few helpful points, then explain the domain and range from the rule. Do not pretend the finite table is the full graph.

    7 The trap

    Memorizing a graph shape without checking its input and output restrictions. The square and square-root functions both stay at nonnegative heights, but only the square root excludes negative inputs.

    Comes back in