Quarry School

Inverses of other polynomials

Subject: MathematicsLeans on: Cubing a numberLeans on: The horizontal line testLeans on: Swap and solveLeans on: Keeping an equation balancedLeans on: A negative number in the bottom of a fractionLeans on: Reading (−∞, ∞)
Level 1 · FoundationsAbout 19 min read3 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    A polynomial is a sum of terms such as 2x3 or −5, where x carries whole-number powers.

    Rule

    A cubic of the form f(x) = a(x − h)3 + k, with a ≠ 0, is a one-to-one function on all real numbers, so it has an inverse function with no restricted domain. To find it: write y = f(x), swap x and y, and solve for y, using a cube root to undo the cube. A cube root has one value and takes no ± sign. The result is f−1(x) = ∛(x−ka) + h, with domain (−∞, ∞) and range (−∞, ∞).

    Step

    1. Look at the shape. If x appears once, inside a single cube, the function is x3 shifted, stretched or flipped. It is one-to-one and needs no cut.

    2. Write y in place of f(x).

    3. Swap x and y. The equation now describes the inverse.

    4. Undo whatever sits outside the cube, last thing done first: move an added or subtracted number to the other side, then divide or multiply away the number in front.

    5. With the cube alone on its side, take the cube root of both sides. Write no ± sign.

    6. If anything is still attached to y, such as y − 2, undo it. That number lands outside the root.

    7. Rename y as f−1(x). State the domain and the range: both are all real numbers.

    8. Check with a number. Put an input into f, feed the output into f−1, and confirm that the input comes back.

    Question

    Find the inverse function of f(x) = 2x3 + 6, and state its domain and range.

    Answer

    f−1(x) = ∛(x−62)
    Domain: (−∞, ∞)
    Range: (−∞, ∞)

    Trap

    The most common mistake is carrying square root habits into cube roots: writing ± in front of the cube root, or cutting the domain as if the cubic were a parabola. A cube root has one value. 83 is 2 only, because (−2)3 is −8 and not 8. Before writing ±, ask whether the power being undone is even or odd. Only an even power loses the sign.

    Strategy

    1. Check that x appears once, inside a single cube. If so, the function is one-to-one and needs no cut.

    2. Write y for f(x), then swap x and y.

    3. Clear the side holding y until the cube is alone: first move any added or subtracted number, then divide or multiply away the number attached to the cube.

    4. Take the cube root of both sides. Write no ± sign.

    5. Undo anything still attached to y. That number goes outside the root.

    6. Rename y as f−1(x) and state the domain and range, both (−∞, ∞).

    7. Check with a round trip: one positive input and one negative input should each come back.

    Term

    inverse function

    Definition

    The function that undoes another function. If f turns 3 into 7, then the inverse, written f−1, turns 7 back into 3.

    Term

    one-to-one function

    Definition

    A function in which every output comes from only one input. No two inputs share an output, so no horizontal line meets its graph twice.

    Term

    restricted domain

    Definition

    A domain made smaller on purpose. You keep only part of the inputs, such as x ≥ 0, so that the function becomes one-to-one and can have an inverse.

    Term

    cube root function

    Definition

    The function f(x) = x3, or a shifted or stretched copy of it. It asks what number, used as a factor three times, gives x. It accepts every real number, negatives included.

    1 In plain words

    A polynomial is a sum of terms such as 2x3 or −5, where x carries whole-number powers. A cubic is a polynomial whose highest power is x3, and x3 means x · x · x. Picture a coat check. Squaring is a careless coat check: 3 and −3 both get ticket 9, so the ticket cannot say whose coat it is. Cubing is a careful one: 3 gets ticket 27 and −3 gets ticket −27. Every ticket points back to one person. So a cubic such as x3 + 4 has an inverse function on its whole domain, and nothing has to be cut. Reading a ticket back is the cube root: 273 = 3 because 3 · 3 · 3 = 27.

    2 Picture it

    (2, 8)(1, 1)(−2, −8)−22−8−448(2, 8)(1, 1)(−2, −8)−2−112−8−448
    Each horizontal line meets the graph of y = x3 at one point, so every output comes from one input.

    Reminder

    Reminder: Cubing a number, The horizontal line test, Swap and solve, Keeping an equation balanced, A negative number in the bottom of a fraction, Reading (−∞, ∞)
    • Cubing a number. x3 means x · x · x. So 23 = 2 · 2 · 2 = 8, and (−2)3 = (−2) · (−2) · (−2) = 4 · (−2) = −8. A negative cubed stays negative.
    • The horizontal line test. If no horizontal line meets a graph twice, every output comes from one input, and the function is a one-to-one function. y = x2 fails at height 4, where x = −2 and x = 2 both land.
    • Swap and solve. To find an inverse, write y for f(x), swap x and y, then solve for y. For y = x + 5: swap to x = y + 5, then y = x − 5.
    • Keeping an equation balanced. Whatever is done to one side is done to the other. From x − 6 = 2y3, dividing both sides by 2 gives x−62 = y3. The whole left side is divided, not only the x.
    • A negative number in the bottom of a fraction. Multiplying the top and the bottom by −1 keeps the value and moves the sign: x−1−2 = 1−x2. With x = 5, both sides are −2.
    • Reading (−∞, ∞). The interval (−∞, ∞) means every real number, with no number left out.

    3 Why

    Cubing keeps the sign of a number: a positive cubed is positive, and a negative cubed is negative. Cubing also keeps the order: a larger number always has a larger cube. So two different inputs can never share an output, and every horizontal line meets the graph of y = x3 exactly once. Shifting, stretching or flipping that graph does not add a second meeting point. Each output has one input, so the cube root gives one answer and no ± choice is needed. Squaring throws the sign away, and that is the only reason a quadratic needed a restricted domain.

    4 The rule

    A cubic of the form f(x)=a(x−h)3+k, with a≠0, is a one-to-one function on all real numbers, so it has an inverse function with no restricted domain.

    To find it: write y=f(x), swap x and y, and solve for y, using a cube root to undo the cube. A cube root has one value and takes no ± sign. The result is f−1(x)=(x−ka)3+h, with domain (−∞,∞) and range (−∞,∞).

    The same idea, five ways

    Say it

    f inverse of x equals the cube root of x. Say: the cube root of 8 is 2.

    Write it

    The inverse function of the cubing function is the cube root function: it takes a number and returns the one number whose cube is that number.

    In math
    • f(x) = x3 and f−1(x) = x3
    • y = x3 means the same as x = y3
    • 83 = 2 because 23 = 8
    • ∛(−8) = −2 because (−2)3 = −8
    • Domain of f−1: (−∞, ∞). Range of f−1: (−∞, ∞).
    Like

    A coat check that gives every coat its own ticket, so any ticket can be traded back for exactly one coat.

    See it
    3cube it: x³cube root: ∛xfirstsecond273
    The cube root machine reads the output 27 back to the single input 3.

    The same idea, other ways

    As a picture

    Draw y = x3 and, dashed behind it, y = x2. Lay a ruler flat at height 4. The ruler meets the dashed parabola twice, at x = −2 and x = 2, so the output 4 has two inputs. The same ruler meets the cubic once, near x = 1.59. Slide the ruler to any height, even below the x-axis: the cubic is always met exactly once. One meeting point per height means the function can be run backward without cutting anything.

    (−2, 4)(2, 4)(∛4, 4)−22−8−448
    The line at height 4 meets the dashed parabola twice and the solid cubic once.
    With small numbers

    Look at the table for x3. The inputs −2, −1, 0, 1, 2 give the outputs −8, −1, 0, 1, 8. Find 8 in the output row: it appears once, under the input 2. Find −8: it appears once, under −2. No output repeats. Now imagine the same table for x2. The outputs would be 4, 1, 0, 1, 4, and both 4 and 1 would appear twice. A repeated output is what forces a cut. The cubic has none.

    input xoutput x³−2−8−1−1001128↑ solve: output given, read every input above it
    The output 8 sits in one cell only, under the input 2, so 83 has one answer.
    As a story

    Putting on socks and then shoes is undone by taking off shoes and then socks: last on, first off. The function f(x) = 2x3 + 6 does three things in order: cube, double, add 6. Its inverse takes them off in reverse order: subtract 6, halve, cube root. Because each of those three steps can be undone in one way only, the whole function can be undone in one way only.

    Rule of thumb

    Odd keeps, even loses. An odd power such as x3 keeps the sign of the input, so nothing is lost and the function can be reversed everywhere. An even power such as x2 loses the sign, so half of the inputs must be cut away before it can be reversed.

    FunctionDo two inputs share an output?Cut needed?Undo step
    f(x)=x2Yes. (−3)2 = 9 and 32 = 9.Yes, at the vertex.Square root, with the sign chosen to match the cut.
    f(x)=x3No. (−3)3 = −27 and 33 = 27.No.Cube root. One answer, no ±.
    f(x)=2(x+1)3−3No. It is x3 shifted and stretched.No.Add 3, divide by 2, cube root, subtract 1.
    f(x)=x3−xYes. The inputs −1, 0 and 1 all give 0.It has no inverse on all real numbers.The method of this lesson does not apply.

    5 How

    1. Look at the shape. If x appears once, inside a single cube, the function is x3 shifted, stretched or flipped. It is one-to-one and needs no cut.
    2. Write y in place of f(x).
    3. Swap x and y. The equation now describes the inverse.
    4. Undo whatever sits outside the cube, last thing done first: move an added or subtracted number to the other side, then divide or multiply away the number in front.
    5. With the cube alone on its side, take the cube root of both sides. Write no ± sign.
    6. If anything is still attached to y, such as y − 2, undo it. That number lands outside the root.
    7. Rename y as f−1(x). State the domain and the range: both are all real numbers.
    8. Check with a number. Put an input into f, feed the output into f−1, and confirm that the input comes back.

    Finding the inverse of a cubic with one cube

    1
    Does x appear once, inside a single cube, as in a(x − h)3 + k?
    YesThe function is one-to-one. No cut is needed. Write y for f(x), swap x and y, and go on.
    NoTest a few inputs for a repeated output, as with x3 − x at −1, 0 and 1. If an output repeats, there is no inverse on all real numbers and this method stops.
    ↓
    2
    After the swap, is a number added to or subtracted from the cube term?
    YesMove it to the other side by doing the opposite to both sides.
    NoGo on.
    ↓
    3
    Is the cube multiplied or divided by a number?
    YesDivide or multiply both sides by that number, so the cube stands alone.
    NoGo on.
    ↓
    4
    Is the cube alone on its side?
    YesTake the cube root of both sides. One value, no ± sign.
    NoGo back and finish clearing the outside of the cube.
    ↓
    5
    Is anything still attached to y, such as y − 2 or y + 1?
    YesUndo it on both sides. The number ends up outside the root.
    NoRename y as f−1(x), state the domain and range, and check with a number.
    1. Check that x appears once, inside a single cube. If so, the function is one-to-one and needs no cut.
    2. Write y for f(x), then swap x and y.
    3. Clear the side holding y until the cube is alone: first move any added or subtracted number, then divide or multiply away the number attached to the cube.
    4. Take the cube root of both sides. Write no ± sign.
    5. Undo anything still attached to y. That number goes outside the root.
    6. Rename y as f−1(x) and state the domain and range, both (−∞, ∞).
    7. Check with a round trip: one positive input and one negative input should each come back.

    6 Worked example

    Worked example

    The inverse of a stretched and raised cubic

    Find the inverse function of f(x) = 2x3 + 6, and state its domain and range.

    Show the steps and the answer
    input xoutput f(x) = 2x³ + 6−2−10−140618222↓ evaluate: input given, read the output below it
    Every output in the bottom row appears once, so each one can be traced back to a single input.
    2f: cube,double, add 6f inverse:subtract 6,halve, cuberootfirstsecond222
    The second machine reverses the first, step by step, so the input 2 comes back out.
    1. Say what the question asks: build the rule that takes each output of f back to the one input it came from.An inverse function runs the original function backward. If f turns 2 into 22, the inverse must turn 22 into 2.
    2. Check the shape: x appears once, inside one cube. This is x3 stretched by 2 and raised by 6.A stretched and raised copy of x3 still meets every horizontal line once, so f is a one-to-one function and no restricted domain is needed.
    3. Write y=2x3+6.y is the name of the output. Naming it makes the swap in the next step visible.
    4. Swap x and y: x=2y3+6.The inverse trades the roles of input and output, so the two letters trade places.
    5. Subtract 6 from both sides: x−6=2y3.f cubes first, then doubles, then adds 6. Adding 6 was done last, so it is undone first. This step clears everything from the right side except the term holding y.
    6. Divide both sides by 2: x−62=y3.Doubling is the next thing to undo. This step leaves the cube alone on its side, ready for the cube root.
    7. Take the cube root of both sides: y=(x−62)3.The cube root undoes the cube. Only one number has a given cube, so there is one answer and no ± sign.
    8. Rename y: f−1(x)=(x−62)3. Domain: (−∞,∞). Range: (−∞,∞).f accepts every real number and its outputs cover every real number. The inverse's inputs are f's outputs, and the inverse's outputs are f's inputs, so both lists are all real numbers.
    Answer
    • f−1(x)=∛(x−62)
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Double-check A round trip with numbers. In the table, the column under 2 shows f(2) = 2 · 8 + 6 = 22. Then f−1(22) = ∛(22−62) = ∛(162) = 83 = 2, the starting input. A negative input works too: f(−1) = 2 · (−1) + 6 = 4, and f−1(4) = ∛(4−62) = ∛(−1) = −1. A second way to the formula: f cubes, doubles, then adds 6, so the reverse is subtract 6, halve, then cube root, which is the same rule.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 7

    Rung 1: the plain cube

    Find the inverse function of f(x) = x3.

    Show the steps and the answer
    −2cube it: x³cube root: ∛xfirstsecond−8−2
    Cubing and then taking the cube root returns the starting number, negative sign included.
    1. Say what the question asks: find the rule that takes each cube back to the number that was cubed.The inverse must turn 27 back into 3 and −8 back into −2.
    2. Write y=x3.y names the output.
    3. Swap x and y: x=y3.The inverse trades input and output.
    4. Take the cube root of both sides: x3=y.The cube root undoes the cube and has one value, so no ± sign appears.
    5. Rename y: f−1(x)=x3.y now stands for the output of the inverse.
    Answer
    • f−1(x)=x3
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Double-check f(3) = 27 and f−1(27) = 273 = 3. With a negative: f(−2) = −8 and f−1(−8) = ∛(−8) = −2. Both inputs come back.

    Rung 2 of 7

    Rung 2: a number added outside the cube

    Find the inverse function of f(x) = x3 + 4.

    Show the steps and the answer
    1. Write y = x3 + 4, then swap x and y: x=y3+4.Swapping the letters turns the equation for f into the equation for its inverse.
    2. Subtract 4 from both sides: x−4=y3.Adding 4 was the last thing f did, so it is the first thing to undo. This leaves the cube alone.
    3. Take the cube root of both sides: y=(x−4)3.The cube is alone, so the cube root removes it. One value, no ±.
    4. Rename y: f−1(x)=(x−4)3.This is the finished rule of the inverse.
    Answer
    • f−1(x)=∛(x−4)
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Double-check f(2) = 8 + 4 = 12, and f−1(12) = ∛(12 − 4) = 83 = 2. Also f(−1) = −1 + 4 = 3, and f−1(3) = ∛(3 − 4) = ∛(−1) = −1.

    Rung 3 of 7

    Rung 3: a shift inside the cube

    Find the inverse function of f(x) = (x − 2)3.

    Show the steps and the answer
    5subtract 2,then cubecube root,then add 2firstsecond275
    The inverse adds 2 after the cube root, because f subtracted 2 before the cube.
    1. Write y = (x − 2)3, then swap x and y: x=(y−2)3.The swap describes the inverse.
    2. Take the cube root of both sides right away: x3=y−2.Nothing sits outside the cube, so the cube itself is the last thing done and the first thing undone.
    3. Add 2 to both sides: y=x3+2.Subtracting 2 happened inside the cube, before cubing, so it is undone after the cube root. The + 2 lands outside the root.
    4. Rename y: f−1(x)=x3+2.Here x3 + 2 means the cube root of x, and then 2 added to the result.
    Answer
    • f−1(x) = x3 + 2, with the 2 outside the root
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Double-check f(5) = (5 − 2)3 = 33 = 27, and f−1(27) = 273 + 2 = 3 + 2 = 5. Also f(0) = (−2)3 = −8, and f−1(−8) = ∛(−8) + 2 = −2 + 2 = 0.

    Rung 4 of 7

    Rung 4: a negative number in front

    Find the inverse function of f(x) = 1 − 2x3.

    Show the steps and the answer
    1. Write y = 1 − 2x3, then swap x and y: x=1−2y3.The swap describes the inverse.
    2. Subtract 1 from both sides: x−1=−2y3.The 1 is not attached to the cube, so it moves first. The minus sign stays with the 2.
    3. Divide both sides by −2: x−1−2=y3.The cube is multiplied by −2, so dividing by −2 leaves the cube alone.
    4. Tidy the sign: x−1−2=1−x2, so 1−x2=y3.Multiplying the top and the bottom of a fraction by −1 does not change its value: the top x − 1 becomes 1 − x and the bottom −2 becomes 2.
    5. Take the cube root of both sides and rename: f−1(x)=(1−x2)3.The cube is alone, and the cube root has one value.
    Answer
    • f−1(x)=∛(1−x2)
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Double-check f(2) = 1 − 2 · 8 = 1 − 16 = −15, and f−1(−15) = ∛(1−(−15)2) = ∛(162) = 83 = 2. Also f(−1) = 1 − 2 · (−1) = 3, and f−1(3) = ∛(1−32) = ∛(−1) = −1.

    Rung 5 of 7

    Rung 5: a stretch, an inside shift and an outside shift together

    Find the inverse function of f(x) = 2(x + 1)3 − 3.

    Show the steps and the answer
    1. Write y = 2(x + 1)3 − 3, then swap x and y: x=2(y+1)3−3.The swap describes the inverse.
    2. Add 3 to both sides: x+3=2(y+1)3.f adds 1, cubes, doubles, then subtracts 3. Subtracting 3 was last, so it is undone first.
    3. Divide both sides by 2: x+32=(y+1)3.Doubling is the next step to undo. Now the cube is alone.
    4. Take the cube root of both sides: (x+32)3=y+1.The cube root removes the cube and gives one value.
    5. Subtract 1 from both sides and rename: f−1(x)=(x+32)3−1.Adding 1 was the first thing f did, so it is the last thing undone. The − 1 sits outside the root.
    Answer
    • f−1(x)=∛(x+32)−1
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Double-check f(1) = 2 · 23 − 3 = 16 − 3 = 13, and f−1(13) = ∛(13+32) − 1 = 83 − 1 = 2 − 1 = 1. Also f(−2) = 2 · (−1)3 − 3 = −2 − 3 = −5, and f−1(−5) = ∛(−5+32) − 1 = ∛(−1) − 1 = −1 − 1 = −2.

    Rung 6 of 7

    Rung 6: the cube divided by a number

    Find the inverse function of f(x) = (x−3)34 + 2.

    Show the steps and the answer
    1. Write y=(x−3)34+2, then swap x and y: x=(y−3)34+2.The swap describes the inverse.
    2. Subtract 2 from both sides: x−2=(y−3)34.Adding 2 was the last thing f did, so it goes first.
    3. Multiply both sides by 4: 4(x−2)=(y−3)3, which is 4x−8=(y−3)3.The cube is divided by 4, and multiplying by 4 undoes that. The 4 multiplies the whole left side, so both x and −2 are multiplied.
    4. Take the cube root of both sides: (4x−8)3=y−3.The cube is alone, and the cube root has one value.
    5. Add 3 to both sides and rename: f−1(x)=(4x−8)3+3.Subtracting 3 was the first thing f did, so it is undone last. The + 3 sits outside the root.
    Answer
    • f−1(x)=∛(4x−8)+3
    • Domain: (−∞, ∞)
    • Range: (−∞, ∞)
    Double-check f(5) = 234 + 2 = 84 + 2 = 2 + 2 = 4, and f−1(4) = ∛(16 − 8) + 3 = 83 + 3 = 2 + 3 = 5. Also f(1) = (−2)34 + 2 = −84 + 2 = −2 + 2 = 0, and f−1(0) = ∛(0 − 8) + 3 = −2 + 3 = 1.

    Rung 7 of 7

    Rung 7: a cubic that this method cannot invert

    Does f(x) = x3 − x have an inverse function on all real numbers?

    Show the steps and the answer
    input xoutput x³ − x−2−6−10001026↑ solve: output given, read every input above it
    The output 0 appears under three inputs, so this cubic fails the horizontal line test.
    1. Say what the question asks: decide whether every output of f comes from one input only.Only a one-to-one function has an inverse function.
    2. Notice the shape: x appears in two places, in x3 and in −x.The no-cut promise covers a cubic with x inside one cube. This one is not of that shape, so it must be tested.
    3. Compute three outputs. f(−1)=(−1)3−(−1)=−1+1=0. f(0)=0−0=0. f(1)=1−1=0.Small inputs are quick to test, and the table shows the result: the output 0 sits under three different inputs.
    4. Conclude: the horizontal line at height 0 meets the graph three times, so f is not a one-to-one function.An inverse would have to send 0 back to −1, 0 and 1 at once, and a function gives one output per input.
    Answer
    No. The inputs −1, 0 and 1 all give the output 0, so f has no inverse function on all real numbers.
    Double-check A second way, by factoring: x3 − x = x(x − 1)(x + 1). Multiplying back gives x(x2 − 1) = x3 − x, so the factoring is right. A product is 0 when any one bracket is 0, which happens at x = 0, x = 1 and x = −1: the same three inputs.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Solving y3 = x − 4 as y = ±∛(x − 4), the way a square is undone.
    The ± belongs to squares, where two numbers share a square: 32 = 9 and (−3)2 = 9. Cubes are not shared: 23 = 8 but (−2)3 = −8. Only one number cubes to x − 4.
    ✓ Instead: y = ∛(x − 4), one value, no ± sign.
    ✗ Not this: Cutting the domain of f(x) = x3 + 4 to x ≥ 0 before inverting, the way a parabola is cut at its vertex.
    The cut throws away half of a function that was already one-to-one. With the cut, f(−2) = −4 would be lost, yet the inverse handles it without trouble: ∛(−4 − 4) = ∛(−8) = −2.
    ✓ Instead: Keep every real number. The domain of f and the domain of f−1 are both (−∞, ∞).
    ✗ Not this: Saying ∛(−8) is not a real number, because a root cannot hold a negative.
    That limit belongs to square roots, since no real number squared is negative. A negative number cubed is negative: (−2) · (−2) · (−2) = −8.
    ✓ Instead: ∛(−8) = −2. A cube root accepts any real number.
    ✗ Not this: For f(x) = (x − 2)3, writing f−1(x) = ∛(x + 2) with the 2 inside the root.
    Test it. f(5) = 27, but ∛(27 + 2) = 293, which is about 3.07 and not 5. The shift happened inside the cube, so it is undone after the cube root, outside it.
    ✓ Instead: f−1(x) = x3 + 2, and then 273 + 2 = 3 + 2 = 5.
    ✗ Not this: Believing every cubic is one-to-one, and trying to invert f(x) = x3 − x by swap and solve.
    f(−1), f(0) and f(1) are all 0, so the output 0 has three inputs. The rule covers a cubic where x sits inside one cube, such as a(x − h)3 + k.
    ✓ Instead: When x appears in more than one term, test for a repeated output first. If one is found, the function has no inverse on all real numbers.

    Tips and tricks

    • Memory device: odd keeps, even loses. An odd power keeps the sign, so x3 needs no cut: (−2)3 = −8 and 23 = 8. An even power loses it, so x2 needs a cut: (−2)2 = 4 and 22 = 4. The same holds for higher powers: (−2)5 = −32 and 25 = 32 differ, while (−2)4 and 24 are both 16.
    • Do not memorize the formula f−1(x) = ∛(x−ka) + h. Swap and solve rebuilds it in ten seconds, and the rebuild is harder to get wrong than a remembered formula.
    • Undo in reverse order: last on, first off, like shoes and socks. List what f does to x in order, then reverse the list and reverse each step.
    • Know the small cubes cold, since they make checking fast: 13 = 1, 23 = 8, 33 = 27, 43 = 64, 53 = 125. Their negatives give −1, −8, −27, −64, −125.
    • For the check, pick an input that makes the arithmetic clean, then test one negative input as well. A sign mistake often hides until a negative number is tried.
    • A number that sat outside the cube in f ends up inside the root in f−1. A number that sat inside the cube in f ends up outside the root in f−1.

    7 The trap

    The most common mistake is carrying square root habits into cube roots: writing ± in front of the cube root, or cutting the domain as if the cubic were a parabola. A cube root has one value. 83 is 2 only, because (−2)3 is −8 and not 8. Before writing ±, ask whether the power being undone is even or odd. Only an even power loses the sign.

    Flash cards

    Say the answer out loud, then flip.

    Why does a cubic such as x3 + 4 need no cut in its domain before you find its inverse?
    Cubing keeps order: the larger of two numbers always has the larger cube, so two different inputs never share an output. It is a careful coat check: 3 gets ticket 27 and −3 gets ticket −27, so every ticket points back to one person.
    When you undo a cube with a cube root, do you write ± in front of the root?
    No. A cube root has one value. 83 is 2 only, because (−2)3 = −8 and not 8. Only an even power, such as a square, loses the sign.
    Find the inverse of f(x) = 2(x − 1)3 + 5.
    • Swap x and y: x = 2(y − 1)3 + 5.
    • Subtract 5, then divide by 2: x−52 = (y − 1)3.
    • Take the cube root, then add 1: f−1(x) = ∛(x−52) + 1.
    • Check: f(3) = 2 · 8 + 5 = 21, and f−1(21) = 83 + 1 = 3.
    What are the domain and the range of the inverse of f(x) = a(x − h)3 + k, with a ≠ 0?
    • Domain: all real numbers, (−∞, ∞).
    • Range: all real numbers, (−∞, ∞).
    • Nothing was cut from the cubic, so nothing is missing from its inverse.