Increasing, decreasing and constant lines
Quick review (2 minutes)
Imagine three jars.
Rule: In f(x) = mx + b, m > 0 gives an increasing linear function, m < 0 gives a decreasing linear function, and m = 0 gives a constant function with a horizontal line.
1. Write the formula as mx + b and keep the sign attached to m.
2. Read the input coefficient; if the term is absent, m = 0.
3. Use positive, negative, or zero slope to classify the function.
4. Compare outputs at two increasing allowed inputs.
5. Keep counting inputs whole and remaining counts nonnegative.
1. Identify the input coefficient.
2. Use its sign to name increasing, decreasing, or constant.
3. Check with outputs at increasing allowed inputs.
4. Apply limits from the real situation.
Classify means say what happens to output as input grows. First classify f(x) = 3x − 2, g(x) = −x + 5, and h(x) = 7. Then model sixty texts sent per day, texts remaining from a 500-text allowance at that rate, and a flat $50 monthly texting charge.
f(x) = 3x − 2: increasing.
g(x) = −x + 5: decreasing.
h(x) = 7: constant.
Sent texts: T(d) = 60d, increasing, using whole completed days within the month.
Remaining texts: R(d) = 500 − 60d, decreasing, using d in {0, 1, 2, 3, 4, 5, 6, 7, 8}.
Current monthly charge: C(d) = 50 dollars, constant.
1. Identify the input coefficient.
2. Verify it is positive.
3. Compare two increasing allowed inputs and show the output rises.
4. For counts, keep whole-number inputs within the stated time period.
1. Identify the negative input coefficient.
2. Describe the amount removed per input unit.
3. Compare outputs at increasing allowed inputs.
4. Stop a remaining-count model before its output becomes negative.
1. Check whether an input term appears.
2. If it is absent, write 0 × input + constant.
3. Evaluate different allowed inputs to verify the same output.
4. State the setting or time period that the fixed amount describes.
Tip: Classify by the input coefficient rather than the starting value. In 3x − 2, the positive three gives increasing behavior.
Function
A rule that assigns exactly one output to each allowed input.
Linear function
A function with constant rate of change, written f(x) = mx + b. Its graph lies on a straight nonvertical line; this section includes constant functions.
Degree
The largest variable exponent in a polynomial after combining terms, ignoring terms with zero coefficients. A nonzero constant has degree zero.
Input
The value you put into a function, often written x.
Output
The value a function produces for a particular input, often written y or f(x).
Slope
The output change divided by the corresponding nonzero input change. It says how much output changes per input unit.
Initial value
The output at input zero, often a starting amount in a model. It is b in f(x) = mx + b.
Increasing linear function
A linear function with positive slope. Its output becomes larger as its input becomes larger.
Decreasing linear function
A linear function with negative slope. Its output becomes smaller as its input becomes larger.
Constant function
A function with the same output at every allowed input. Its graph is horizontal and its slope is zero.
Domain
The set of all inputs allowed for a function or its stated real-world model.
Nonnegative
Zero or greater. Zero is included.
Model
A mathematical description of a situation, used within stated assumptions and allowed inputs.
Horizontal line
A line whose height stays the same. Its equation is y = b and its slope is zero.
Evaluate
Find an expression's value or a function's output after replacing its variable with a given number.
Coefficient
The number multiplying a variable or a power of a variable.
Coordinate
One number specifying a point's position along an axis.
1 In plain words
Imagine three jars. You add the same number of coins to the first jar each day. You remove the same number from the second. You leave the third alone. As days pass, the first amount grows, the second shrinks, and the third stays the same. Linear functions can behave in those three ways. An increasing linear function has outputs that grow when inputs grow. A decreasing linear function has outputs that shrink. A constant function keeps the same output. Read their graphs from left to right, because moving right means the input is increasing.
2 Picture it
f(x) = 3x − 2: increasing
g(x) = −x + 5: decreasing
h(x) = 7 = 0x + 7: constant
Reminder
Reminder: Negative coefficient, Function versus output, Evaluation, Fraction times a whole number, Signed subtraction, Multiplication by zero, Domain and counts
- Negative coefficient. In −x + 5, the minus sign belongs to the coefficient −.
- Function versus output. Different inputs may share an output: h(0) = h(2) = 7 still gives one output per input.
- Evaluation. For f(x) = 3x − 2, f(1) = 3(1) − 2 = 1.
- Fraction times a whole number. − × 2 = − = −1, so g(2) = 4.
- Signed subtraction. 1 − (−2) = 3, so an output can increase from a negative start.
- Multiplication by zero. 0 × x = 0, so h(x) = 0x + 7 always gives 7.
- Domain and counts. Completed-day counts use whole numbers. R(9) = −40 is outside a model for nonnegative remaining texts.
3 Why
For f(x) = mx + b, adding one to the input adds m to the output. A positive m raises the output. A negative m lowers it. A zero m changes nothing. The starting value b shifts the line's height but does not change what one extra input step does. That is why the slope's sign, rather than the starting amount's sign, determines direction.
4 The rule
In mx , m > 0 gives an increasing linear function, m < 0 gives a decreasing linear function, and gives a constant function with a horizontal line.
The same idea, five ways
positive slope rises, negative slope falls, and zero slope stays level.
The sign of slope determines whether linear outputs increase, decrease, or stay constant.
- m > 0: increasing
- m < 0: decreasing
- m = 0: constant
- > : compare f() and f()
A jar fills, empties, or stays unchanged as another day passes.
Read left to right
Positive slope: rising line
Negative slope: falling line
Zero slope: horizontal line
The same idea, other ways
Adding coins gives positive change, removing coins gives negative change, and leaving the jar alone gives zero change.
m > 0: output grows
m < 0: output shrinks
m = 0: unchanged output
Move right to increase input. An upward line gives larger outputs; a downward line gives smaller outputs; a horizontal line gives the same output.
In f(x) = 3x − 2, one extra input adds three. In g(x) = −x + 5, it removes half. In h(x) = 7, it adds zero.
f: m = 3, increasing
g: m = −, decreasing
h: m = 0, constant
| Slope | The line |
|---|---|
| m > 0 | Increasing: rises from left to right. |
| m < 0 | Decreasing: falls from left to right. |
| m = 0 | Constant: horizontal. |
Part 1: Increasing linear function
An increasing linear function is like a jar receiving the same deposit each day. As you move to a later day, you have more in the jar. On the graph, larger inputs are farther right and their outputs are higher. The slope is positive because each extra input step adds a positive amount. The jar could begin with a negative balance, such as a debt, and still increase. Increasing describes the direction of the change, not whether the current amount is above or below zero.
- Rule: An increasing linear function has m > 0, because extra input adds positive output change.
- Rule: Its graph rises from left to right, because moving right increases the input and the matching output becomes higher.
- Rule: T(d) = 60d models sixty texts per completed day, because d equal daily groups contain 60d texts.
Reminder
Reminder: Subtracting a negative
- Subtracting a negative. 1 − (−2) = 1 + 2 = 3, so the output rose by three.
The same idea, five ways
as input gets larger, output gets larger.
A positive slope gives an increasing linear function.
- m > 0
- > implies f() > f()
- T(d) = 60d
You add the same positive deposit to a jar each day.
Worked example
A line starting below zero and a growing text count
Show increasing behavior means find a higher output at a larger input. Compare f(0) and f(1) for f(x) = 3x − 2. Then compare T(2) and T(3) for T(d) = 60d within one billing month.
Show the steps and the answer
- and .Substitution gives the requested outputs.
- Compare and , so f is increasing.The input rose by one and the output rose by its positive slope three.
- texts and texts.Every completed day contributes sixty texts to the total sent.
- Compare texts for the additional day.The positive daily change shows increasing behavior.
- f is increasing because m = 3 > 0.
- T is increasing because its slope is 60 texts per day.
- After three completed days, T(3) = 180 texts.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Circle the input coefficient, including its sign, before classifying.
Part 2: Decreasing linear function
A decreasing linear function is like spending the same amount from a jar each day. As you move to a later day, less remains. Its slope is negative because an extra input step removes some output. On the graph, moving right takes you to a lower point. This can describe texts remaining in an allowance, but you must stop before the formula claims a negative number of remaining texts. A formula can keep decreasing forever; a real allowance cannot contain fewer than zero unused texts.
- Rule: A decreasing linear function has m < 0, because increasing the input adds negative output change.
- Rule: Its graph falls from left to right, because larger inputs have smaller outputs.
- Rule: R(d) = 500 − 60d counts remaining texts from a 500-text allowance, because sent texts are removed from the original allowance.
- Rule: For whole completed days, use d in {0, 1, 2, 3, 4, 5, 6, 7, 8}, because R(8) = 20 is nonnegative but R(9) = −40 is not a remaining count.
Reminder
Reminder: Fraction multiplication and negative addition
- Fraction multiplication and negative addition. − × 2 = −1, and 5 + (−1) = 4.
The same idea, five ways
as input gets larger, output gets smaller.
A negative slope gives a decreasing linear function on its allowed inputs.
- m < 0
- > implies f() < f()
- R(d) ≥ 0
- d in {0, 1, 2, 3, 4, 5, 6, 7, 8}
A jar loses the same amount at each withdrawal until nothing remains.
Worked example
Half a unit per step, then a limited allowance
Show decreasing behavior means find a lower output at a larger input. Compare g(0) and g(2) for g(x) = −x + 5. Then find texts remaining after three completed days and check the last allowed completed day in R(d) = 500 − 60d.
Show the steps and the answer
- and .Two input steps remove two halves, totaling one.
- Name g decreasing because 4 < 5 as the input moves from zero to two.Its negative slope produces smaller outputs at larger inputs.
- After three days, sent texts are ; remaining texts are .Remaining texts equal the initial allowance minus texts already sent.
- texts.Eight completed days still leave a nonnegative count.
- , so exclude day nine from this formula for remaining texts.The calculation shows where the model stops describing an available allowance. A negative remaining count is not possible.
- g is decreasing with slope −.
- After three completed days, 320 texts remain.
- Day eight leaves 20 texts.
- Day nine is outside this completed-day remaining-text model.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Read a falling line from left to right and require remaining counts to stay at least zero.
Part 3: Constant function
A constant function is like a flat monthly membership price. The day you look at the bill can change, but the monthly price stays the same. The output does not depend on which allowed input you choose. You can write h(x) = 7 as h(x) = 0x + 7 to see its slope: zero. Its graph is horizontal because every point has the same output height. A $50 unlimited-texting plan works this way during one billing month. Fifty dollars is the monthly charge, not a daily charge.
- Rule: A constant function has m = 0 and f(x) = b, because the input contributes zero to the output.
- Rule: Its graph is horizontal, because every input has the same output height.
- Rule: C(d) = 50 is the flat $50 texting charge for one billing month, because changing that month's day does not change its charge.
- Rule: A constant function belongs to the mx + b line family but is not degree 1, because its x term has coefficient zero.
Reminder
Reminder: Multiplication by zero
- Multiplication by zero. 0 × 2 + 7 = 7, so changing the input adds nothing.
The same idea, five ways
output stays the same when input changes.
A constant function has zero slope and a horizontal graph.
- m = 0
- f(x) = b
- f(x) = 0x + b
- h(x) = 7
- C(d) = 50
A fixed membership price stays the same throughout the billing month.
Worked example
Seven everywhere and fifty dollars for the month
Constant means equal outputs at different inputs. Find h(0) and h(2) for h(x) = 7. Then find the monthly texting charge on completed days one and three of the same billing month.
Show the steps and the answer
- Rewrite as .The input has no contribution, so its coefficient is zero.
- and .Zero multiplication removes either input.
- , so dollars and dollars.The question measures the fixed charge for one billing month.
- Read slope zero dollars per day and classify C as constant.An extra day does not change that month's charge.
- h(0) = h(2) = 7, so h is constant with slope zero.
- C(1) = C(3) = $50 for the same billing month, so C is constant with slope zero dollars per day.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Insert a zero input coefficient when the input letter is absent.
5 How
- Write the formula as mx + b and keep the sign attached to m.
- Read the input coefficient; if the term is absent, m = 0.
- Use positive, negative, or zero slope to classify the function.
- Compare outputs at two increasing allowed inputs.
- Keep counting inputs whole and remaining counts nonnegative.
Classify a line by slope
- Identify the input coefficient.
- Use its sign to name increasing, decreasing, or constant.
- Check with outputs at increasing allowed inputs.
- Apply limits from the real situation.
6 Worked example
Worked example
Three formulas, then three text-message models
Classify means say what happens to output as input grows. First classify f(x) = 3x − 2, g(x) = −x + 5, and h(x) = 7. Then model sixty texts sent per day, texts remaining from a 500-text allowance at that rate, and a flat $50 monthly texting charge.
Show the steps and the answer
- For f, ; and , so the output increases.The positive coefficient adds three per step even though the start is negative.
- For g, ; and , so the output decreases.Two input steps remove two halves, totaling one.
- For h, write ; , so the output stays constant.An absent input term has coefficient zero.
- Let d count completed days within one billing month. Write sent texts as , with positive slope sixty texts per day.Every completed day adds sixty to a starting sent count of zero.
- Write remaining texts as . At day three, texts, with negative slope texts per day.Sent texts are removed from the original allowance.
- , but . Keep the completed-day remaining model only through day eight.A remaining count cannot be negative.
- Write dollars for the unlimited plan's charge within one billing month, with slope zero.The monthly charge does not vary with which day is observed.
- f(x) = 3x − 2: increasing.
- g(x) = −x + 5: decreasing.
- h(x) = 7: constant.
- Sent texts: T(d) = 60d, increasing, using whole completed days within the month.
- Remaining texts: R(d) = 500 − 60d, decreasing, using d in {0, 1, 2, 3, 4, 5, 6, 7, 8}.
- Current monthly charge: C(d) = 50 dollars, constant.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Read the slope sign, then read the graph left to right.
- For this text-count model, use whole completed days and exclude negative remaining counts.
7 The trap
Tip: Classify by the input coefficient rather than the starting value. In 3x − 2, the positive three gives increasing behavior.
Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.