Quarry School

Even, odd, or neither: test the whole formula

Subject: MathematicsLeans on: Powers of negative numbersLeans on: Distributing an outside minusLeans on: Domain symmetry
Level 2 · BuildingAbout 21 min read14 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Think of folding a paper drawing along its vertical center line.

    Rule

    On a domain symmetric about zero: even means f(−x) = f(x); odd means f(−x) = −f(x), for every allowed x.
    If neither identity holds for all allowed inputs, the function is neither. The zero-valued function on a symmetric domain satisfies both identities.

    Step

    1. 1. Check that every allowed input x has its opposite −x in the domain. A domain that fails this condition rules out both symmetries.

    2. 2. Replace every x in the formula with (−x), including x inside powers and multiplied terms.

    3. 3. Simplify. For an even power, the minus signs cancel in pairs. For an odd power, one minus sign remains.

    4. 4. Compare the entire result with f(x). If they match for every allowed input, the function is even.

    5. 5. Separately write −f(x), distributing its minus to every term. If f(−x) matches this expression for every allowed input, the function is odd. If only the even comparison succeeded, it is even. If neither comparison succeeded, it is neither. If both succeed, it is both; the zero function on a symmetric domain does this.

    Question

    Let f(x) = x4 + 2x3 − 2x + 5, defined for all real numbers. A student evaluates f(1) = 6 and f(−1) = 6, sees that the two outputs match, and concludes that f is even. (a) Test the whole formula to decide whether f is even, odd, or neither. (b) Find every real x for which f(−x) = f(x), and use the result to explain why the student's check did not settle the question.

    Answer

    (a) Neither. f(−x) = x4 − 2x3 + 2x + 5. That is not identical to f(x) = x4 + 2x3 − 2x + 5, and it is not identical to −f(x) = −x4 − 2x3 + 2x − 5. For example, f(2) = 33 while f(−2) = 9, and 9 is neither 33 nor −33. (b) f(−x) = f(x) only for x = −1, 0 and 1. The matching outputs at x = 1 are a coincidence and do not show the even identity for every x.

    Trap

    Calling a function odd because some terms change sign. Odd means the entire output changes sign, including its constant term. Compare with −f(x) written in full. A few matching number pairs can check a proof, but cannot replace an identity that covers every input.

    Strategy

    1. 1. Inspect the Domain to see whether every allowed x has an allowed −x. This establishes whether the symmetry tests can apply at all.

    2. 2. Replace every x by (−x), then simplify. This computes the height at the opposite address using the same rule.

    3. 3. Write −f(x), changing every term's sign. This gives the entire opposite output needed for the odd test.

    4. 4. Compare f(−x) with f(x) and with −f(x) as identities. Matching only the first means even; matching only the second means odd; matching neither means neither; matching both means both.

    5. 5. Check the result with opposite inputs, while keeping the identity as the proof. For x3 + 2x, inputs 1 and −1 give 3 and −3, confirming the odd pairing.

    Term

    Function

    Definition

    A rule that gives exactly one Output for every accepted Input.

    Term

    Input

    Definition

    The value you give a Function before its rule runs, usually labeled x.

    Term

    Output

    Definition

    The result returned by a Function, written f(x) or y.

    Term

    Graph

    Definition

    A picture of a Function's accepted Input and Output pairs, plotted as points (x, f(x)).

    Term

    Domain

    Definition

    All Inputs a Function accepts without an invalid calculation.

    Term

    Vertex

    Definition

    The turning point of a quadratic U, or the corner where an absolute value V changes direction.

    Term

    Horizontal reflection

    Definition

    Replacing the Input by its opposite, so the Graph flips across the y-axis.

    Term

    Reflection

    Definition

    A flip across a line that places each point the same distance on the opposite side.

    Term

    Even function

    Definition

    A Function with opposite Inputs allowed and equal Outputs: f(−x) = f(x). Its Graph is symmetric about the y-axis.

    Term

    Odd function

    Definition

    A Function with opposite Inputs allowed and opposite Outputs: f(−x) = −f(x). Its Graph is symmetric about the origin.

    Term

    Neither even nor odd

    Definition

    A Function that fails both required symmetry tests, including the requirement that opposite Inputs belong to its Domain.

    Term

    Symmetric about the y-axis

    Definition

    Reflecting left to right across the y-axis leaves the Graph unchanged.

    Term

    Symmetric about the origin

    Definition

    Turning a Graph half a turn around (0, 0) leaves it unchanged.

    Term

    Origin

    Definition

    The point (0, 0), where the x-axis and y-axis meet.

    Term

    Reciprocal

    Definition

    One divided by a nonzero number. Multiplying the number by its Reciprocal gives 1.

    Term

    Constant

    Definition

    A fixed number that does not vary with the Input. The toolkit Constant function returns 1 for every Input.

    Term

    Absolute value function

    Definition

    The Function f(x) = |x|, returning the distance from x to 0. Its Graph is a V.

    Term

    Cubic function

    Definition

    A Function built from a nonzero x3 term and optional lower powers. The toolkit example is f(x) = x3.

    Term

    Reciprocal function

    Definition

    The toolkit Function f(x) = 1x. It accepts every real Input except 0 and never produces Output 0.

    Term

    Axis

    Definition

    One of the two reference number lines on a graph. The x-axis is horizontal; the y-axis is vertical. Together they are called axes.

    Term

    Coordinate

    Definition

    One number in a point's address. In (x, y), x measures sideways position and y measures height from the Origin.

    Term

    Coefficient

    Definition

    A fixed number multiplying a letter or expression.

    Term

    Identity

    Definition

    An equation true for every allowed input, rather than a single numerical coincidence.

    Term

    Polynomial

    Definition

    A finite sum of whole-number powers of the input multiplied by fixed coefficients.

    Term

    Real number

    Definition

    A number represented by a point on the number line, including negative numbers, zero, fractions, and square roots of nonnegative numbers.

    Term

    Term

    Definition

    One piece of a sum, with its attached sign.

    Term

    Substitution

    Definition

    Replacing every occurrence of a letter by a chosen value or expression.

    Term

    Set

    Definition

    A collection of values specified together.

    Term

    Integer

    Definition

    A whole number or its negative, including zero.

    1 In plain words

    Think of folding a paper drawing along its vertical center line. If the two halves match, the graph is Symmetric about the y-axis, and its function is called an Even function. Another drawing may match after you turn the paper halfway around the center point. That graph is Symmetric about the origin, and its function is called an Odd function. The Origin is the point (0, 0), where the axes cross. These names describe the whole graph, not whether an answer is an even or odd integer. To decide from a formula, compare what happens at opposite inputs. A function may be Neither even nor odd.

    2 Picture it

    Even: f(−x) = f(x)

    Odd: f(−x) = −f(x)

    Neither: neither whole-formula identity holds

    First check that the domain allows opposite inputs

    Reminder

    Reminder: Powers of negative numbers, Distributing an outside minus, Domain symmetry
    • Powers of negative numbers. Parentheses include the negative in the power: (−2)2 = 4 and (−2)3 = −8. Pair negative factors to see which sign remains.
    • Distributing an outside minus. Negate the entire output: −(x3 + 1) = −x3 − 1. The constant changes sign too.
    • Domain symmetry. Opposite inputs must both be allowed. [−3, 3] has opposite pairs; [0, 3] permits 1 but excludes −1.

    3 Why

    Equal heights at opposite inputs give the paired points (x, f(x)) and (−x, f(x)), which are mirrors across the y-axis. Opposite heights at opposite inputs give (x, f(x)) and (−x, −f(x)), which match after a half turn around the origin. Both comparisons require opposite inputs to be allowed. Algebra lets you test all inputs at once: replacing every x by (−x) produces a formula that can be compared with f(x) and with the negative of its entire output.

    4 The rule

    On a domain symmetric about zero: even means f(−x)=f(x); odd means f(−x)=−f(x), for every allowed x.

    If neither identity holds for all allowed inputs, the function is neither. The zero-valued function on a symmetric domain satisfies both identities.

    The same idea, five ways

    Say it

    An even function gives the same height at opposite addresses. An odd function gives opposite heights at opposite addresses. Neither means both required pairings fail.

    Write it

    On a domain symmetric about zero, compare f(−x) with f(x) and with −f(x) for every allowed input.

    In math
    • Even: f(−x) = f(x); graph points (u, v) and (−u, v).
    • Odd: f(−x) = −f(x); graph points (u, v) and (−u, −v).
    • Neither: neither identity holds for every allowed input, or the domain lacks opposite input pairs.
    • Both: f(x) = 0 on a symmetric domain.
    Like

    Even matches a fold along the vertical axis. Odd matches a half turn around the origin.

    See it

    Even: (2, 4) ↔ (−2, 4)

    Odd: (2, 8) ↔ (−2, −8)

    Neither: h(1) = 2, h(−1) = 0

    Check opposite inputs in the domain first

    The same idea, other ways

    As two actions on a drawing

    For x2, folding across the y-axis pairs (2, 4) with (−2, 4). For x3, a half turn pairs (2, 8) with (−2, −8). The first action keeps the height; the second changes both coordinate signs.

    mirror partneroriginal point−222468
    The equal heights at opposite inputs show the even pairing on x2.
    As three complete expressions

    For h(x) = x3 + 1, write h(−x) = −x3 + 1 beside h(x) = x3 + 1 and −h(x) = −x3 − 1. It matches neither. Comparing complete expressions prevents a constant from being overlooked.

    As three complete expressions

    Even: f(−x) = f(x); graph points (u, v) and (−u, v).

    As a partner requirement

    Before comparing heights, ask whether the partner address exists. The formula x2 on x ≥ 0 accepts 1 but rejects −1, so no algebra can supply the missing partner. The zero function on [−3, 3] has every partner, and zero agrees with its own opposite, so both tests hold.

    As a partner requirement

    Even: f(−x) = f(x); graph points (u, v) and (−u, v).

    ClassificationAlgebra testPaired graph pointsPicture
    Even functionf(−x)=f(x)(x, y) and (−x, y)Mirror across the y-axis
    Odd functionf(−x)=−f(x)(x, y) and (−x, −y)Half turn around the origin
    Neither even nor oddNeither identity holds for every inputEach symmetry has at least one missing or mismatched required pairing.Neither symmetry
    Bothf(x) = 0 on a symmetric domain(x, 0) and (−x, 0)The graph matches both actions

    Part 1: Even function

    Imagine two seats the same distance left and right of a stage, both at the same height. An Even function pairs opposite horizontal positions with equal heights. Folding its graph along the y-axis would line up the points. The name concerns this pairing, not whether the function values are even whole numbers. The Absolute value function is another familiar example because opposite inputs have the same distance from zero.

    • Test: f(−x) = f(x) for every input, on a domain symmetric about zero.
    • Graph description: Symmetric about the y-axis. A Horizontal reflection reproduces the same graph.
    • Even-power terms and constants form an even polynomial. This is a useful recognition aid, while substitution gives the proof.
    (−2, 4)(2, 4)−22246810
    Opposite inputs −2 and 2 on x2 have the same height 4.

    Worked example

    Prove that x2 is even

    Classify f(x) = x2 on all real inputs.
    This asks whether opposite allowed inputs always give equal heights, opposite heights, or neither pattern.

    Show the steps and the answer
    leftright−4−224−448
    Opposite inputs −2 and 2 have the same height 4.
    1. Every real input and its opposite are allowed.Squaring is defined for every real number, so the domain is symmetric about zero.
    2. f(−x)=(−x)2=(−x)(−x)=x2=f(x).The two minus signs multiply to a plus.
    3. The function is even. It is not odd: f(1)=1 while −f(1)=−1, and f(−1)=1.The even identity holds for every input, but the odd identity fails at input 1.
    Answer
    f(x) = x2 is even and is not odd.
    Double-check The graph has the matching points (−2, 4) and (2, 4), which are mirror images across the y-axis.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: x2 is odd because its graph includes the origin.
    Passing through the origin does not establish opposite heights. Inputs 1 and −1 both give 1, while oddness would require one output to be −1.
    ✓ Instead: f(x) = x2 is even and is not odd.

    Tips and tricks

    • Use the displayed landmark or known column as a check before drawing any additional points.

    Part 2: Odd function

    Imagine a seesaw centered at the origin, with one dot right and up and another the same distance left and down. A half turn exchanges the two dots. An Odd function has that pairing throughout its graph. Opposite inputs produce opposite signed heights. Reflecting its graph across both axes gives the original graph again, because each coordinate has changed to its opposite.

    • Test: f(−x) = −f(x) for every input, on a domain symmetric about zero.
    • Graph description: Symmetric about the origin. The point (u, v) has a matching point (−u, −v).
    • If zero is in the domain of an odd function, f(0) = 0. This follows from f(0) = −f(0).
    • A symmetric domain need not contain zero. The Reciprocal function 1x is odd on the domain x ≠ 0.
    (−2, −8)(2, 8)−22−8−448
    A half turn around (0, 0) exchanges the two marked cubic points.

    Worked example

    Prove that the cubic function is odd

    Classify f(x) = x3 on all real inputs.
    This asks whether opposite allowed inputs always give equal heights, opposite heights, or neither pattern.

    Show the steps and the answer
    oppositeoriginal−22−8−448
    The marked points match after a half turn around the origin.
    1. The domain is all real numbers, so it includes opposite inputs.Every real number can be multiplied by itself three times.
    2. f(−x)=(−x)3=(−x)(−x)(−x)=−x3=−f(x).Two negative factors give a positive; multiplying by the third negative factor makes the product negative.
    3. The function is odd and is not even.The odd identity holds for all inputs. The even identity fails because f(−1) = −1 differs from f(1) = 1.
    Answer
    The Cubic function f(x) = x3 is odd and is not even.
    Double-check The points (2, 8) and (−2, −8) are opposite in both coordinates, so a half turn maps one to the other.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: x3 is even because the same shape appears on both sides of the origin.
    The heights must match for evenness. Inputs 1 and −1 give 1 and −1, which are opposites. A half turn, not a vertical mirror, matches the curve.
    ✓ Instead: The Cubic function f(x) = x3 is odd and is not even.

    Tips and tricks

    • Use the displayed landmark or known column as a check before drawing any additional points.

    Part 3: Neither even nor odd

    A picture can fail both the folding test and the half-turn test. That is what Neither even nor odd means. A graph may look familiar and still lose its symmetry when you move it. For example, lifting an odd graph up by a nonzero amount keeps its shape but changes the center of its half-turn symmetry. The definition of odd specifically requires the center to be the origin.

    • Neither means the even identity and the odd identity each fail for at least one allowed input, or the domain does not allow opposite inputs.
    • A mixture of nonzero even-power and odd-power polynomial terms is neither. A nonzero constant added to a nonzero odd polynomial also makes it neither.
    • Symmetry about a different line or point does not satisfy symmetry about the y-axis or the origin.
    (−1, 0)(1, 2)(0, 1)−22−8−448
    Lifting x3 by 1 makes the heights at opposite inputs neither equal nor opposites.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: x3 + 1 is odd because its cubic term changes sign.
    The constant stays +1 under input substitution, but the negative of the entire original output has constant −1. The two expressions disagree.
    ✓ Instead: h(x) = x3 + 1 is neither even nor odd.

    Tips and tricks

    • Use the displayed landmark or known column as a check before drawing any additional points.

    Part 4: Zero function and domain symmetry

    Imagine drawing only along the horizontal axis, with a dot at each allowed address and every height zero. Zero is its own opposite. If the allowed addresses come in opposite pairs, that drawing matches both the fold and the half turn. The zero function can therefore be both even and odd. But choosing only addresses to the right removes the needed left-hand partners, even though the formula still says zero.

    • Domain symmetry: whenever x is allowed, −x must be allowed too. Intervals such as [−3, 3] are symmetric; [0, 3] is not.
    • On a symmetric domain, z(x) = 0 is both even and odd, because z(−x) = 0 = z(x) and z(−x) = 0 = −z(x).
    • Only a zero-valued function can be both: if f(x) = f(−x) and f(−x) = −f(x), then f(x) = −f(x), so 2f(x) = 0 and f(x) = 0 at every allowed input.
    • A nonzero Constant function on a symmetric domain is even and is not odd.

    z(x) = 0 on [−3, 3]

    (−2, 0) and (2, 0)

    Mirror: (2, 0) → (−2, 0)

    Half turn: (2, 0) → (−2, −0) = (−2, 0)

    Worked example

    Check zero on a symmetric domain

    Classify z(x) = 0 with domain [−3, 3].
    This asks whether opposite allowed inputs always give equal heights, opposite heights, or neither pattern.

    Show the steps and the answer
    included endincluded end−22−11
    On the stated interval [−3, 3], the zero graph is unchanged by either symmetry.
    1. If −3≤x≤3, then −3≤−x≤3 too.Negating a number in this interval keeps it between the same two opposite endpoints.
    2. z(−x)=0=z(x), so z is even.Every allowed input returns the same zero height.
    3. z(−x)=0=−0=−z(x), so z is also odd.Zero is its own negative.
    Answer
    z is both even and odd on [−3, 3].
    Double-check Its points (2, 0) and (−2, 0) satisfy both required pairings, and the algebra establishes the same result for every input in the domain.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The formula z(x) = 0 makes the function both even and odd on domain [0, 3].
    Input 1 lacks its opposite −1 in that domain. Both definitions also require a symmetric domain. The example uses [−3, 3], which does have opposite partners.
    ✓ Instead: z is both even and odd on [−3, 3].

    Tips and tricks

    • Use the displayed landmark or known column as a check before drawing any additional points.

    5 How

    1. Check that every allowed input x has its opposite −x in the domain. A domain that fails this condition rules out both symmetries.
    2. Replace every x in the formula with (−x), including x inside powers and multiplied terms.
    3. Simplify. For an even power, the minus signs cancel in pairs. For an odd power, one minus sign remains.
    4. Compare the entire result with f(x). If they match for every allowed input, the function is even.
    5. Separately write −f(x), distributing its minus to every term. If f(−x) matches this expression for every allowed input, the function is odd. If only the even comparison succeeded, it is even. If neither comparison succeeded, it is neither. If both succeed, it is both; the zero function on a symmetric domain does this.

    Classify a function by checking both symmetries

    1
    Does every allowed input have its opposite in the Domain?
    YesCompute f(−x), f(x), and −f(x).
    NoClassify the function as neither; its graph lacks a required opposite-input partner.
    ↓
    2
    Does f(−x) equal f(x) for every allowed input?
    YesRecord the even property, then check the odd property too.
    NoThe function is not even. Continue to the odd test.
    ↓
    3
    Does f(−x) equal −f(x) for every allowed input?
    YesRecord the odd property. If the even test also passed, the function is both and every output is zero.
    NoIf the even test passed, classify it as even. If it also failed, classify it as neither.
    1. Inspect the Domain to see whether every allowed x has an allowed −x. This establishes whether the symmetry tests can apply at all.
    2. Replace every x by (−x), then simplify. This computes the height at the opposite address using the same rule.
    3. Write −f(x), changing every term's sign. This gives the entire opposite output needed for the odd test.
    4. Compare f(−x) with f(x) and with −f(x) as identities. Matching only the first means even; matching only the second means odd; matching neither means neither; matching both means both.
    5. Check the result with opposite inputs, while keeping the identity as the proof. For x3 + 2x, inputs 1 and −1 give 3 and −3, confirming the odd pairing.

    6 Worked example

    Worked example

    Even, odd, or neither: one matching pair of outputs is not proof

    Let f(x) = x4 + 2x3 − 2x + 5, defined for all real numbers. A student evaluates f(1) = 6 and f(−1) = 6, sees that the two outputs match, and concludes that f is even. (a) Test the whole formula to decide whether f is even, odd, or neither. (b) Find every real x for which f(−x) = f(x), and use the result to explain why the student's check did not settle the question.

    Show the steps and the answer
    1. Check the domain. f is a polynomial, so every real number is an allowed input. For every real x, its opposite −x is also real, so the domain is symmetric about 0.Both identities compare the outputs at x and at −x, so −x must be allowed whenever x is. A domain that failed this would rule out both symmetries. This one passes, so the test continues.
    2. Replace every x with (−x): f(−x)=(−x)4+2(−x)3−2(−x)+5.f(−x) is the same rule applied to the input −x, so every x changes. That includes the x inside each power and the x in the multiplied term −2x. The parentheses keep the minus sign inside the power, and (−x)4 is not the same as −x4. The constant 5 contains no x, so it stays.
    3. Simplify term by term: (−x)4=x4; 2(−x)3=2(−x3)=−2x3; −2(−x)=+2x. So f(−x)=x4−2x3+2x+5.(−x)4 has four minus signs, which cancel in pairs, so it equals x4. (−x)3 has three minus signs. Two cancel and one remains, so the x3 term changes sign. In −2(−x), a negative times a negative is positive.
    4. Compare f(−x)=x4−2x3+2x+5 with f(x)=x4+2x3−2x+5. The x4 terms match and the constants match. The x3 terms (−2x3 and +2x3) have opposite signs, and so do the x terms (+2x and −2x). So f(x)−f(−x)=4x3−4x, which is not 0 for every x. At x=2: f(2)=16+16−4+5=33, but f(−2)=16−16+4+5=9.Even requires f(−x) = f(x) for every allowed x, so one input where the outputs differ rules it out. Since 9 ≠ 33, f is not even.
    5. Write −f(x), distributing the minus to every term: −f(x)=−x4−2x3+2x−5. Compare it with f(−x)=x4−2x3+2x+5. Now the x3 and x terms match, but x4 and −x4 differ, and so do +5 and −5. At x=2: f(−2)=9, but −f(2)=−33.Odd requires f(−x) = −f(x) for every allowed x. Here f(−x) + f(x) = 2x4 + 10. That sum is at least 10 and never 0, so the odd identity fails at every input. At x = 0, for instance, the identity would force f(0) = −f(0), that is f(0) = 0. But f(0) = 5, so f is not odd.
    6. Conclude: f is neither even nor odd.The even comparison failed in step 4 and the odd comparison failed in step 5. By the rule, a function for which neither identity holds for all allowed inputs is neither.
    7. For part (b), use the difference from step 4. f(−x)=f(x) exactly when 4x3−4x=0, that is 4x(x2−1)=0. So x=0 or x2=1, giving x=−1, 0 or 1. The student's input x=1 is one of only these three values, so f(1)=f(−1)=6 is a coincidence.Even is a claim about every allowed input, so agreement at one input, or at a few, cannot prove it. Only the whole-formula result f(−x) = f(x) can prove it, and that failed here. The sign-changing part of f, 2x3 − 2x, happens to equal 0 at x = −1, 0 and 1, so at those three inputs the asymmetry is invisible.
    Answer
    (a) Neither. f(−x) = x4 − 2x3 + 2x + 5. That is not identical to f(x) = x4 + 2x3 − 2x + 5, and it is not identical to −f(x) = −x4 − 2x3 + 2x − 5. For example, f(2) = 33 while f(−2) = 9, and 9 is neither 33 nor −33. (b) f(−x) = f(x) only for x = −1, 0 and 1. The matching outputs at x = 1 are a coincidence and do not show the even identity for every x.
    Double-check Substitute x = 2 into the original formula: f(2) = 16 + 16 − 4 + 5 = 33 and f(−2) = 16 − 16 + 4 + 5 = 9. The simplified f(−x) = x4 − 2x3 + 2x + 5 at x = 2 also gives 16 − 16 + 4 + 5 = 9, so the algebra is right. Since 9 ≠ 33 and 9 ≠ −33, both identities fail at x = 2. The same formula at x = 1 gives 1 − 2 + 2 + 5 = 6 = f(1), which reproduces the student's matching values. Separately, write f(x) = (x4 + 5) + (2x3 − 2x). The first group is unchanged when x becomes −x, and the second changes sign. So f(−x) = f(x) would need 2x3 − 2x = 0 for every x, and f(−x) = −f(x) would need x4 + 5 = 0 for every x. Neither group is the zero function, so f is neither.

    Work to write

    1. Domain: all real numbers, which is symmetric about 0.
    2. f(−x)=(−x)4+2(−x)3−2(−x)+5=x4−2x3+2x+5
    3. f(−x) ≠ f(x): the x3 and x terms have opposite signs; f(−2) = 9 but f(2) = 33, so f is not even.
    4. −f(x) = −x4 − 2x3 + 2x − 5 ≠ f(−x): the x4 and constant terms differ; f(−2) = 9 but −f(2) = −33, so f is not odd.
    5. f is neither even nor odd.
    6. f(−x) = f(x) only when 4x3 − 4x = 0, that is x = −1, 0 or 1, so the match at x = 1 does not prove f is even.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 4

    An even power

    Classify p(x) = x2 on its full domain.
    This asks whether opposite allowed inputs always give equal heights, opposite heights, or neither pattern.

    Show the steps and the answer
    leftright−4−224246810
    The paired points at −3 and 3 both have height 9.
    1. The full domain is all real numbers, which allows opposite inputs.A square is defined for any real number.
    2. p(−x)=(−x)2=x2=p(x).A negative multiplied by a negative is positive.
    3. p is even and not odd.The even identity holds for all x, while p(−1) = 1 differs from −p(1) = −1.
    Answer
    Even.
    Double-check At −3 and 3 the outputs are both 9, matching the mirror-image point pairing.

    Rung 2 of 4

    The formula does not erase a domain restriction

    A function has formula r(x) = x2 but accepts only x ≥ 0. Is it even, odd, or neither?
    This asks whether opposite allowed inputs always give equal heights, opposite heights, or neither pattern.

    Show the steps and the answer
    allowed24246810
    The stated domain includes only the right half of x2.
    1. The domain is [0,∞), so 1 is allowed and −1 is not.The restriction is part of the function, not an optional detail of its formula.
    2. The domain is not symmetric about zero.At least one allowed input lacks its opposite partner.
    3. The function is neither even nor odd on this domain.Both definitions require the paired opposite input. Writing (−x)2 = x2 does not make a forbidden input allowed.
    Answer
    Neither, because the domain is not symmetric about zero.
    Double-check The graph includes (1, 1) but no point at input −1. It therefore lacks both the mirror partner (−1, 1) and the half-turn partner (−1, −1).

    Rung 3 of 4

    Show which function can be both

    Suppose f is both even and odd on a domain symmetric about zero. What must every output be?
    This asks whether opposite allowed inputs always give equal heights, opposite heights, or neither pattern.

    Show the steps and the answer
    −4−224−11
    Every height is 0, so both required point pairings coincide.
    1. Evenness gives f(−x)=f(x), and oddness gives f(−x)=−f(x).Both identities apply to every allowed input.
    2. Set the two equal expressions equal: f(x)=−f(x). Add f(x) to both sides to get 2f(x)=0.Both expressions equal f(−x). Adding the same amount to both sides preserves equality.
    3. Divide by 2: f(x)=0 at every allowed input.Zero divided by a nonzero number is zero.
    4. Conversely, a zero output satisfies both tests: 0=0 and 0=−0.This confirms the candidate actually meets both definitions on the symmetric domain.
    Answer
    Every output must be zero. The zero-valued function on a symmetric domain is both even and odd.
    Double-check For z(x) = 0 on all real inputs, the graph is the x-axis. Reflecting it across the y-axis or rotating it halfway around the origin reproduces the same graph.

    Rung 4 of 4

    Read three complete graphs without starting from formulas

    Classify the three supplied complete graphs A, B, and C as even, odd, or neither. Their curves continue with the same shapes outside the viewing window, and all real inputs are allowed. This asks you to test the mirror and half-turn pairings on the entire supplied curves.

    (0, 2)leftright−4−2242468
    Graph A has the same height on opposite sides of the y-axis.
    partnerpoint−22−8−448
    Graph B has opposite heights at opposite inputs throughout its complete curve.
    Show the steps and the answer
    (1, 0)leftright−2242610
    Graph C fails both pairings at inputs −2 and 2.
    1. Graph A has matching arms across the y-axis. Its points at inputs −2 and 2 both have height 4; the same mirror pairing holds along both complete arms.An even function has equal heights at opposite inputs. Here the full V is mirrored about the y-axis.
    2. Graph B matches after a half turn around (0, 0). Its point (1, 2) has partner (−1,−2), and the entire rising curve has this opposite-coordinate pairing.An odd function pairs opposite inputs with opposite heights; the complete cubic-shaped drawing matches that half turn.
    3. Graph C has point (2, 1) but its point at the opposite input −2 has height 9.The heights 1 and 9 are neither equal nor opposites, so this one failing pair disproves each required symmetry.
    Answer
    • Graph A: even.
    • Graph B: odd.
    • Graph C: neither.
    Double-check Reflect the complete V left to right: it matches. Rotate the complete S halfway about the origin: it matches. For C, its vertex is at (1, 0), and the marked heights at ±2 already fail both tests. A few matching dots alone would not prove a symmetry.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: h(x) = x3 + 1 is odd because the x3 term changes sign.
    The entire output must change sign. Substitution gives h(−x) = −x3 + 1, while negating the output gives −h(x) = −x3 − 1. The constants disagree.
    ✓ Instead: h is neither. For example, h(1) = 2 and h(−1) = 0. Those outputs are neither equal nor opposites.
    ✗ Not this: The formula x2 guarantees an Even function even when the Domain is x ≥ 0.
    The domain is part of the function. Input 1 is allowed but −1 is forbidden, so the required partner point is missing.
    ✓ Instead: On [0, ∞), this function is neither. On all real inputs, x2 is even because opposite inputs exist and (−x)2 = x2.
    ✗ Not this: An even result at one pair of opposite inputs proves the function is even.
    One pair checks only those inputs. For h(x) = x3 + 1, the pair at x = 0 matches itself, but h(1) = 2 and h(−1) = 0 fail both symmetry tests.
    ✓ Instead: Use a formula identity to cover every allowed input. One failing pair can disprove a proposed symmetry. Also test both identities for the zero function, which is both even and odd on a symmetric domain.

    Tips and tricks

    • Remember even agrees, odd opposes. The agreement concerns outputs at opposite inputs, not whether a value is an even or odd integer.
    • Write three separate expressions on the exam: f(x), f(−x), and −f(x). Parenthesize every substituted −x and negate every term in −f(x).
    • Check the Domain before doing algebra. A missing opposite input rules out both symmetries.
    • A graph-only check uses point partners. For an even graph, (2, 4) needs (−2, 4). For an odd graph, (2, 8) needs (−2, −8). Check the whole drawing, because a few matching dots cannot establish its symmetry.

    7 The trap

    Calling a function odd because some terms change sign. Odd means the entire output changes sign, including its constant term. Compare with −f(x) written in full. A few matching number pairs can check a proof, but cannot replace an identity that covers every input.