Quarry School

1. Turn a circle's height into the sine graph — quick review

In plain words

Picture a dot riding around a circular wheel with radius 1.

Rule

Rule: For y = sin x: Domain is all real numbers; Range is [−1, 1]; the graph is Continuous.
Period (T) = 2π; sin(x + 2kπ) = sin x for any Integer k; sin(−x) = −sin x.

Step

  1. 1. Treat x as the Input, also called the Independent variable, and y = sin x as the Output, also called the Dependent variable. The output depends on which input you choose.

  2. 2. Use radians on the horizontal axis. On a Unit circle, a Radian input has the same numerical value as signed rim distance along the circle. Ordinary traveled Arc length equals the input's magnitude. The Central angle is the turn at the center.

  3. 3. Read each column of the value table: its top entry is x and its bottom entry is sin x. Point plotting means putting the Ordered pair (x, sin x) on the Graph in the xy-plane.

  4. 4. Locate the five Key points (0, 0), (π2, 1), (π, 0), (3π2, −1), and (2π, 0). They record the start, top, middle, bottom, and return. A Key point is an anchor at a quarter-cycle position; five such anchors divide a cycle into four gaps. A quarter turn is one fourth of a full turn. A peak is a top height and a valley, also called a trough, is a bottom height.

  5. 5. Draw a smooth curve through the points. An Intercept is a crossing or touching of an axis; here x = 0, π, and 2π give output 0.

  6. 6. Continue the same pattern left and right. One Cycle has horizontal length 2π, because a full circle lap repeats the entire height record.

Question

A point P starts at (1, 0) on the unit circle. For an input x in radians, P travels a rim distance equal to the magnitude of x, counterclockwise when x > 0 and clockwise when x < 0. The output y = sin x is the height (y-coordinate) of the point where P stops. The figure marks P after a counterclockwise quarter turn of 90°, at (0, 1). (a) For x = −2π, −3π2, −π, −π2 and 0, find where P stops and make a value table of sin x. (b) Plot the ordered pairs (x, sin x), using π ≈ 3.14 to place the inputs, and draw one cycle of y = sin x on [−2π, 0]. Name its intercepts, its peak and its valley. (c) Continue the pattern to find sin(21π2), and state the domain and range of y = sin x.

Answer

(a) For x = −2π, −3π2, −π, −π2 and 0, P stops at (1, 0), (0, 1), (−1, 0), (0, −1) and (1, 0). The value table is x: −2π, −3π2, −π, −π2, 0 with sin x: 0, 1, 0, −1, 0. (b) The cycle is a smooth curve through (−2π, 0), (−3π2, 1), (−π, 0), (−π2, −1) and (0, 0). Its intercepts are at x = −2π, −π and 0, its peak is (−3π2, 1) and its valley is (−π2, −1). (c) sin(21π2) = 1. The domain is all real numbers and the range is [−1, 1].

Trap

Do not turn the exact radian input π2 into a degree input of π2°. It means a quarter turn, or 90°. The decimal 1.57 is only a rounded label for that exact input.

Strategy

  1. Confirm that the horizontal inputs are radians.

  2. Read down each input column to get its sine height.

  3. Plot the five quarter-turn points first, then the intermediate source points.

  4. Connect smoothly and repeat by adding or subtracting 2π from inputs.

Strategy

  1. Use one angle unit for both inputs. If needed, add or subtract whole turns to locate their positions on the first cycle.

  2. Mark both positions on the same circle or sine graph. Identify the rising or falling interval that contains them.

  3. On one increasing interval, keep the input order for the outputs. On one decreasing interval, reverse the order for the outputs.

  4. If the inputs cross a top or bottom, compare the actual circle heights. Equal tilts on opposite sides of the vertical axis give equal sine heights.

  5. Write the comparison of the sine outputs and explain which picture fact supports it.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Input

Definition

Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.

Term

Independent variable

Definition

Pronounced in-duh-PEN-dunt VAIR-ee-uh-bul. The variable you choose first, usually x; its value is the function's input.

Term

Output

Definition

Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.

Term

Dependent variable

Definition

Pronounced dih-PEN-dunt VAIR-ee-uh-bul. The variable determined by the input through the function, usually y.

Term

xy-plane

Definition

Pronounced eks-why plane. The flat coordinate plane formed by a horizontal x-axis and a vertical y-axis.

Term

Coordinate

Definition

Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.

Term

Ordered pair

Definition

Pronounced OR-derd pair. Two coordinates written as (x, y), horizontal first and vertical second.

Term

Graph

Definition

Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.

Term

y-axis

Definition

Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.

Term

Origin

Definition

Pronounced OR-ih-jin. The point (0, 0) where the axes meet.

Term

Radian

Definition

Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.

Term

Real number

Definition

Pronounced REE-ul NUM-ber. Any point on the number line, including integers, fractions, and numbers such as π.

Term

Unit circle

Definition

Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).

Term

Arc length

Definition

Pronounced ark length. Distance measured along part of a circle's curved rim.

Term

Central angle

Definition

Pronounced SEN-trul ANG-gul. An angle whose vertex is at the circle's center and whose sides meet the circle.

Term

Domain

Definition

Pronounced doh-MAYN. All allowed inputs of a function.

Term

Range

Definition

Pronounced raynj. All output values a function actually reaches.

Term

Continuous

Definition

Pronounced kun-TIN-yoo-us. A graph without gaps, breaks or jumps; small changes in input produce small changes in output.

Term

Periodic function

Definition

Pronounced peer-ee-OD-ik FUNK-shun. A function with a positive repeat distance p such that f(x + p) = f(x) for every input.

Term

Period (T)

Definition

Pronounced PEER-ee-ud tee. The smallest positive horizontal repeat distance of a nonconstant sine or cosine wave.

Term

Cycle

Definition

Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.

Term

Integer

Definition

Pronounced IN-tuh-jer. A whole-number count that can be positive, negative or zero; no fractional part.

Term

Odd function

Definition

Pronounced od FUNK-shun. A function satisfying f(−x) = −f(x); changing the input sign changes the output sign.

Term

Symmetry

Definition

Pronounced SIM-uh-tree. A flip or turn that makes a figure match itself.

Term

Symmetry about the origin

Definition

Pronounced SIM-uh-tree uh-BOUT thee OR-ih-jin. Every graph point (x, y) has a matching point (−x, −y). A half turn about (0, 0) preserves the graph.

Term

With respect to

Definition

Pronounced with ree-SPEKT too. Relative to the named object or viewpoint; abbreviated w.r.t. in the notes.

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

Absolute value

Definition

Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Point plotting

Definition

Pronounced point PLOT-ing. Finding input-output pairs, placing their points, and using the function's shape to connect them.

Term

Key points

Definition

Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.

Term

Intercept

Definition

Pronounced IN-ter-sept. A point where a graph meets an axis. An x-intercept has y = 0; a y-intercept has x = 0.

Term

Interval

Definition

Pronounced IN-ter-vul. A connected stretch of a number line, with notation indicating whether its endpoints are included.

Term

Fundamental period

Definition

Pronounced fun-duh-MEN-tul PEER-ee-ud. The smallest positive repeat distance; this is what period means for the nonconstant waves here.

Term

Quarter turn

Definition

Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or π2 radians.

Term

Quadrant

Definition

Pronounced KWOD-runt. One of the four regions made by the coordinate axes, numbered counterclockwise from the upper right.

Term

Reference angle

Definition

Pronounced REF-er-uns ANG-gul. The acute angle between an angle's terminal ray and the nearest horizontal axis; it helps find coordinate magnitudes.

Term

Clockwise

Definition

Pronounced KLOK-wise. Turning in the direction a clock's hands move; from the rightmost circle point, the first motion is downward.

Term

Counterclockwise

Definition

Pronounced kown-ter-KLOK-wise. Turning opposite a clock's hands; from the rightmost circle point, the first motion is upward.

Term

Increasing

Definition

Pronounced in-KREE-sing. A graph rises as its input moves right through the interval being discussed.

Term

Decreasing

Definition

Pronounced dee-KREE-sing. A graph falls as its input moves right through the interval being discussed.

Term

Degree

Definition

Pronounced duh-GREE. An angle unit defined by convention as one of 360 equal parts of a full turn. The ° sign distinguishes degrees from radians.

Term

Radius

Definition

Pronounced RAY-dee-us. The distance from a circle's center to its rim.

Term

Ray

Definition

Pronounced ray. A line starting at one endpoint and extending forever in one direction.

Term

Denominator

Definition

Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.