Quarry School

Graphs of sine and cosine — quick review

1. Turn a circle's height into the sine graph

In plain words

Picture a dot riding around a circular wheel with radius 1.

Rule

Rule: For y = sin x: Domain is all real numbers; Range is [−1, 1]; the graph is Continuous.
Period (T) = 2π; sin(x + 2kπ) = sin x for any Integer k; sin(−x) = −sin x.

Step

  1. 1. Treat x as the Input, also called the Independent variable, and y = sin x as the Output, also called the Dependent variable. The output depends on which input you choose.

  2. 2. Use radians on the horizontal axis. On a Unit circle, a Radian input has the same numerical value as signed rim distance along the circle. Ordinary traveled Arc length equals the input's magnitude. The Central angle is the turn at the center.

  3. 3. Read each column of the value table: its top entry is x and its bottom entry is sin x. Point plotting means putting the Ordered pair (x, sin x) on the Graph in the xy-plane.

  4. 4. Locate the five Key points (0, 0), (π2, 1), (π, 0), (3π2, −1), and (2π, 0). They record the start, top, middle, bottom, and return. A Key point is an anchor at a quarter-cycle position; five such anchors divide a cycle into four gaps. A quarter turn is one fourth of a full turn. A peak is a top height and a valley, also called a trough, is a bottom height.

  5. 5. Draw a smooth curve through the points. An Intercept is a crossing or touching of an axis; here x = 0, π, and 2π give output 0.

  6. 6. Continue the same pattern left and right. One Cycle has horizontal length 2π, because a full circle lap repeats the entire height record.

Question

A point P starts at (1, 0) on the unit circle. For an input x in radians, P travels a rim distance equal to the magnitude of x, counterclockwise when x > 0 and clockwise when x < 0. The output y = sin x is the height (y-coordinate) of the point where P stops. The figure marks P after a counterclockwise quarter turn of 90°, at (0, 1). (a) For x = −2π, −3π2, −π, −π2 and 0, find where P stops and make a value table of sin x. (b) Plot the ordered pairs (x, sin x), using π ≈ 3.14 to place the inputs, and draw one cycle of y = sin x on [−2π, 0]. Name its intercepts, its peak and its valley. (c) Continue the pattern to find sin(21π2), and state the domain and range of y = sin x.

Answer

(a) For x = −2π, −3π2, −π, −π2 and 0, P stops at (1, 0), (0, 1), (−1, 0), (0, −1) and (1, 0). The value table is x: −2π, −3π2, −π, −π2, 0 with sin x: 0, 1, 0, −1, 0. (b) The cycle is a smooth curve through (−2π, 0), (−3π2, 1), (−π, 0), (−π2, −1) and (0, 0). Its intercepts are at x = −2π, −π and 0, its peak is (−3π2, 1) and its valley is (−π2, −1). (c) sin(21π2) = 1. The domain is all real numbers and the range is [−1, 1].

Trap

Do not turn the exact radian input π2 into a degree input of π2°. It means a quarter turn, or 90°. The decimal 1.57 is only a rounded label for that exact input.

Strategy

  1. Confirm that the horizontal inputs are radians.

  2. Read down each input column to get its sine height.

  3. Plot the five quarter-turn points first, then the intermediate source points.

  4. Connect smoothly and repeat by adding or subtracting 2π from inputs.

Strategy

  1. Use one angle unit for both inputs. If needed, add or subtract whole turns to locate their positions on the first cycle.

  2. Mark both positions on the same circle or sine graph. Identify the rising or falling interval that contains them.

  3. On one increasing interval, keep the input order for the outputs. On one decreasing interval, reverse the order for the outputs.

  4. If the inputs cross a top or bottom, compare the actual circle heights. Equal tilts on opposite sides of the vertical axis give equal sine heights.

  5. Write the comparison of the sine outputs and explain which picture fact supports it.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Input

Definition

Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.

Term

Independent variable

Definition

Pronounced in-duh-PEN-dunt VAIR-ee-uh-bul. The variable you choose first, usually x; its value is the function's input.

Term

Output

Definition

Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.

Term

Dependent variable

Definition

Pronounced dih-PEN-dunt VAIR-ee-uh-bul. The variable determined by the input through the function, usually y.

Term

xy-plane

Definition

Pronounced eks-why plane. The flat coordinate plane formed by a horizontal x-axis and a vertical y-axis.

Term

Coordinate

Definition

Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.

Term

Ordered pair

Definition

Pronounced OR-derd pair. Two coordinates written as (x, y), horizontal first and vertical second.

Term

Graph

Definition

Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.

Term

y-axis

Definition

Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.

Term

Origin

Definition

Pronounced OR-ih-jin. The point (0, 0) where the axes meet.

Term

Radian

Definition

Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.

Term

Real number

Definition

Pronounced REE-ul NUM-ber. Any point on the number line, including integers, fractions, and numbers such as π.

Term

Unit circle

Definition

Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).

Term

Arc length

Definition

Pronounced ark length. Distance measured along part of a circle's curved rim.

Term

Central angle

Definition

Pronounced SEN-trul ANG-gul. An angle whose vertex is at the circle's center and whose sides meet the circle.

Term

Domain

Definition

Pronounced doh-MAYN. All allowed inputs of a function.

Term

Range

Definition

Pronounced raynj. All output values a function actually reaches.

Term

Continuous

Definition

Pronounced kun-TIN-yoo-us. A graph without gaps, breaks or jumps; small changes in input produce small changes in output.

Term

Periodic function

Definition

Pronounced peer-ee-OD-ik FUNK-shun. A function with a positive repeat distance p such that f(x + p) = f(x) for every input.

Term

Period (T)

Definition

Pronounced PEER-ee-ud tee. The smallest positive horizontal repeat distance of a nonconstant sine or cosine wave.

Term

Cycle

Definition

Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.

Term

Integer

Definition

Pronounced IN-tuh-jer. A whole-number count that can be positive, negative or zero; no fractional part.

Term

Odd function

Definition

Pronounced od FUNK-shun. A function satisfying f(−x) = −f(x); changing the input sign changes the output sign.

Term

Symmetry

Definition

Pronounced SIM-uh-tree. A flip or turn that makes a figure match itself.

Term

Symmetry about the origin

Definition

Pronounced SIM-uh-tree uh-BOUT thee OR-ih-jin. Every graph point (x, y) has a matching point (−x, −y). A half turn about (0, 0) preserves the graph.

Term

With respect to

Definition

Pronounced with ree-SPEKT too. Relative to the named object or viewpoint; abbreviated w.r.t. in the notes.

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

Absolute value

Definition

Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Point plotting

Definition

Pronounced point PLOT-ing. Finding input-output pairs, placing their points, and using the function's shape to connect them.

Term

Key points

Definition

Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.

Term

Intercept

Definition

Pronounced IN-ter-sept. A point where a graph meets an axis. An x-intercept has y = 0; a y-intercept has x = 0.

Term

Interval

Definition

Pronounced IN-ter-vul. A connected stretch of a number line, with notation indicating whether its endpoints are included.

Term

Fundamental period

Definition

Pronounced fun-duh-MEN-tul PEER-ee-ud. The smallest positive repeat distance; this is what period means for the nonconstant waves here.

Term

Quarter turn

Definition

Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or π2 radians.

Term

Quadrant

Definition

Pronounced KWOD-runt. One of the four regions made by the coordinate axes, numbered counterclockwise from the upper right.

Term

Reference angle

Definition

Pronounced REF-er-uns ANG-gul. The acute angle between an angle's terminal ray and the nearest horizontal axis; it helps find coordinate magnitudes.

Term

Clockwise

Definition

Pronounced KLOK-wise. Turning in the direction a clock's hands move; from the rightmost circle point, the first motion is downward.

Term

Counterclockwise

Definition

Pronounced kown-ter-KLOK-wise. Turning opposite a clock's hands; from the rightmost circle point, the first motion is upward.

Term

Increasing

Definition

Pronounced in-KREE-sing. A graph rises as its input moves right through the interval being discussed.

Term

Decreasing

Definition

Pronounced dee-KREE-sing. A graph falls as its input moves right through the interval being discussed.

Term

Degree

Definition

Pronounced duh-GREE. An angle unit defined by convention as one of 360 equal parts of a full turn. The ° sign distinguishes degrees from radians.

Term

Radius

Definition

Pronounced RAY-dee-us. The distance from a circle's center to its rim.

Term

Ray

Definition

Pronounced ray. A line starting at one endpoint and extending forever in one direction.

Term

Denominator

Definition

Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.

2. A changes height: amplitude, stretch, compression, reflection

In plain words

Picture the wheel rider's height record printed on stretchy paper.

Rule

Rule: For y = A sin x: Amplitude = |A| = maximum−minimum2; Midline is y = 0; Range is [−|A|, |A|].
|A| > 1 stretches vertically; 0 < |A| < 1 compresses vertically; A < 0 reflects across the x-axis. For A ≠ 0, T = 2π.

Step

  1. 1. Find A, the Constant multiplying sine on the outside. In −3 sin x, A = −3; in sin x, the invisible coefficient is A = 1.

  2. 2. Compute |A| by keeping its size and removing its minus sign. This is the Amplitude, never a negative distance.

  3. 3. Compare |A| with 1 to decide whether there is a Vertical stretch, a Vertical compression, or unchanged height. A negative sign adds a Reflection.

  4. 4. Multiply each original sine output by A. The input coordinates stay fixed because this is an outside multiplication.

  5. 5. Write the Midline y = 0 and Range [−|A|, |A|]. Maximum and Minimum mean highest and lowest outputs; a Local maximum or Local minimum is a peak or valley compared with nearby points.

  6. 6. If you are given extreme heights, subtract minimum from maximum and divide by 2. The source waves are centered at zero; do not mistake the entire top-to-bottom distance for the amplitude.

  7. 7. If A = 0, every output is 0. Draw the constant graph y = 0 and do not assign a smallest positive period.

Question

A designer cuts a wavy edge for a paper border. On the design grid 1 unit = 1 cm, x is the distance along the strip, and y is the height above the strip's center line y = 0 (negative y means below the line). The template edge is y = sin x, which passes through the five points (0, 0), (π2, 1), (π, 0), (3π2, −1) and (2π, 0). In the figure these x-values are plotted as the decimals 0, 1.57, 3.14, 4.71 and 6.28. To get a shallower wave that dips below the center line first, the designer switches to the edge y = −0.6 sin x. (a) Writing the new edge as y = A sin x, name A and find the amplitude. (b) Decide whether the height is stretched, compressed or unchanged, and whether the edge is reflected. (c) Find the point of the new edge at each of the five x-values. (d) Give the midline, the maximum and the minimum height and where each occurs for 0 ≤ x ≤ 2π, the range, and the period. (e) A coworker measures 1.2 cm from the highest point of the new edge to its lowest point and says the amplitude is 1.2 cm. Explain the mistake and find the amplitude from the extreme heights.

Answer

(a) A = −0.6 and the amplitude is 0.6 cm. (b) Vertical compression, since 0 < 0.6 < 1, and a reflection across the x-axis, since A < 0. (c) (0, 0), (π2, −0.6), (π, 0), (3π2, 0.6), (2π, 0). (d) Midline y = 0; maximum 0.6 at x = 3π2; minimum −0.6 at x = π2; range [−0.6, 0.6]; period T = 2π. (e) 1.2 cm is maximum − minimum, the full height of the wave; the amplitude is 1.22 = 0.6 cm.

Trap

A = −3 is a signed coefficient, but Amplitude = |−3| = 3 is a distance. The minus sign describes reflection, not a negative amplitude. The unshifted Midline is y = 0, the x-axis; x = 0 is a vertical line.

Strategy

  1. Read A outside sine.

  2. Take |A| for amplitude.

  3. Use |A| to decide stretch or compression. A negative sign tells you the heights will also reflect when you multiply by signed A in the next step.

  4. Multiply the original outputs by the signed A exactly once and retain the same inputs. This one multiplication already includes any reflection.

  5. Check the extreme heights and the range.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Input

Definition

Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.

Term

Output

Definition

Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.

Term

Coordinate

Definition

Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.

Term

Graph

Definition

Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.

Term

x-axis

Definition

Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.

Term

y-axis

Definition

Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.

Term

Range

Definition

Pronounced raynj. All output values a function actually reaches.

Term

Cycle

Definition

Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.

Term

Constant

Definition

Pronounced KON-stunt. A quantity that stays fixed while the input changes.

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

Absolute value

Definition

Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.

Term

Amplitude

Definition

Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.

Term

Midline

Definition

Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.

Term

Maximum

Definition

Pronounced MAK-sih-mum. The largest output reached by a function in the set being considered.

Term

Minimum

Definition

Pronounced MIN-ih-mum. The smallest output reached by a function in the set being considered.

Term

Local maximum

Definition

Pronounced LOH-kul MAK-sih-mum. A peak whose output is at least as high as nearby outputs. These sine and cosine peaks also reach the whole wave's maximum.

Term

Local minimum

Definition

Pronounced LOH-kul MIN-ih-mum. A trough whose output is at least as low as nearby outputs. These sine and cosine troughs also reach the whole wave's minimum.

Term

Vertical stretch or compression

Definition

Pronounced VER-tih-kul strech or kum-PRESH-un. Multiplying all outputs by A changes their distances from the midline by the factor |A|.

Term

Vertical stretch

Definition

Pronounced VER-tih-kul strech. Multiplying outputs by a coefficient of size greater than 1 moves points farther from the midline.

Term

Vertical compression

Definition

Pronounced VER-tih-kul kum-PRESH-un. Multiplying outputs by a nonzero coefficient of size less than 1 moves points closer to the midline.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Key points

Definition

Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.

Term

Coefficient

Definition

Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.

Term

Ratio

Definition

Pronounced RAY-shee-oh. One quantity divided by another, comparing their sizes.

Term

Interval

Definition

Pronounced IN-ter-vul. A connected stretch of a number line, with notation indicating whether its endpoints are included.

Term

Opposite side

Definition

Pronounced OP-uh-zit side. The right triangle leg across from the acute angle you chose; it does not touch that angle.

Term

Numerator

Definition

Pronounced NOO-muh-ray-ter. The top of a fraction.

Term

Denominator

Definition

Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.

3. Omega changes width: derive the period

In plain words

Imagine recording the same wheel rider while changing how quickly the rider moves around the circle.

Rule

Rule: For y = A sin(ωx), with A ≠ 0 and ω ≠ 0: T = 2π|ω| and |ω| = 2πT.
|ω| > 1 compresses horizontally; 0 < |ω| < 1 stretches horizontally; ω < 0 reverses the input direction. A = 0 or ω = 0 gives a constant graph without a smallest positive period.

Step

  1. 1. Read ω, the entire coefficient multiplying x inside sine. In sin(2x), ω = 2; in sin(12x), ω = 12; in sin(5πx), ω = 5π.

  2. 2. Check A ≠ 0 and ω ≠ 0 before calling the graph a nonconstant wave.

  3. 3. Take |ω| to remove direction. Period (T) measures a positive horizontal length.

  4. 4. Compute T = 2π ÷ |ω|. Divide by a fraction by multiplying by its reciprocal. Cancel π only when it is a common factor of the full numerator and denominator.

  5. 5. Compare |ω| with 1. Larger than 1 means Horizontal compression; between 0 and 1 means Horizontal stretch; equal to 1 keeps the original width.

  6. 6. Check by multiplying the proposed period by |ω|. The product must be 2π, exactly one inside lap.

  7. 7. If a graph gives T and you need ω, use |ω| = 2πT. Choosing ω > 0 gives the convenient representative ω = 2πT; period alone does not determine its sign.

Question

A wind turbine's blades turn at a steady rate. One blade is 42 m long from the center of the hub to its tip. At time x = 0 seconds that tip is level with the hub's center and moving upward. Its height above the hub's center, in meters, is modeled by y = 42 sin(4π9x). The sine input u = 4π9x is the angle, in radians, that the blades have turned. The figure graphs u (vertical axis) against x as a straight line through (0, 0) and (9, 4π). (a) Find the period T of the tip's height, say whether the graph is a horizontal compression or a horizontal stretch of y = 42 sin x, and check T. (b) In lighter wind the rotor slows until one full turn takes 7 seconds, and the tip again starts level with the hub's center and moving upward. Find ω for the new model y = 42 sin(ωx), and say whether its graph is a horizontal compression or stretch of y = 42 sin x.

Answer

(a) T = 92 = 4.5 seconds; |ω| = 4π9 ≈ 1.40 > 1, so the graph is a horizontal compression of y = 42 sin x. (b) ω = 2π7 ≈ 0.90, giving y = 42 sin(2π7x), a horizontal stretch of y = 42 sin x.

Trap

The inside multiplier is not the period. For sin(2x), ω = 2 but T = π. Divide 2π by |ω|. A negative ω also gives a positive period because width is a distance, not a direction.

Strategy

  1. Identify the entire inside coefficient ω.

  2. Check that A and ω are nonzero.

  3. Take |ω| and divide 2π by it.

  4. Reduce fractions and common factors.

  5. Multiply |ω| by the proposed T to check for one full turn 2π.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Input

Definition

Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.

Term

Output

Definition

Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.

Term

Graph

Definition

Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.

Term

x-axis

Definition

Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.

Term

y-axis

Definition

Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.

Term

Radian

Definition

Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.

Term

Real number

Definition

Pronounced REE-ul NUM-ber. Any point on the number line, including integers, fractions, and numbers such as π.

Term

Period (T)

Definition

Pronounced PEER-ee-ud tee. The smallest positive horizontal repeat distance of a nonconstant sine or cosine wave.

Term

Cycle

Definition

Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.

Term

Constant

Definition

Pronounced KON-stunt. A quantity that stays fixed while the input changes.

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

Absolute value

Definition

Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.

Term

Amplitude

Definition

Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.

Term

Midline

Definition

Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.

Term

Horizontal stretch

Definition

Pronounced hor-ih-ZON-tul strech. An inside coefficient with 0 < |ω| < 1 lengthens the period beyond 2π.

Term

Horizontal compression

Definition

Pronounced hor-ih-ZON-tul kum-PRESH-un. An inside coefficient with |ω| > 1 shortens the period below 2π.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Identity

Definition

Pronounced eye-DEN-tih-tee. An equation true for every input where its two sides are defined.

Term

Undefined

Definition

Pronounced un-dih-FYND. Having no assigned value, such as when a function's formula would require division by zero.

Term

Coefficient

Definition

Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.

Term

Reciprocal

Definition

Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.

Term

Quarter turn

Definition

Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or π2 radians.

Term

Increasing

Definition

Pronounced in-KREE-sing. A graph rises as its input moves right through the interval being discussed.

Term

Numerator

Definition

Pronounced NOO-muh-ray-ter. The top of a fraction.

Term

Denominator

Definition

Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.

4. Read A and omega before doing arithmetic

In plain words

Picture a music player with two separate knobs.

Rule

Rule: For y = A sin(ωx), with A ≠ 0 and ω ≠ 0, amplitude = |A| and T = 2π|ω|. A is outside sine; ω multiplies x inside sine.

Step

  1. 1. Write any missing coefficient: −sin(...) means −1 × sin(...), and sin x means 1 × sin(1x).

  2. 2. Copy A from outside sine and the entire ω from the factor multiplying x inside. Keep their signs here.

  3. 3. Use |A| for amplitude and |ω| for the period calculation.

  4. 4. Calculate T = 2π ÷ |ω|. Dividing by a fraction multiplies by its reciprocal, meaning its upside down version.

  5. 5. Put T back into |ω|T = 2π to check the complete turn. The range is [−|A|, |A|].

Strategy

  1. Name A and ω before arithmetic.

  2. Use |A| for amplitude and 2π ÷ |ω| for period.

  3. Multiply |ω| by the proposed T to recover 2π.

Question

A marker buoy rides long ocean swells. Its height above its calm-water level, in meters, x seconds after a lifeguard starts a stopwatch, is modeled by y = −sin(2x5). A negative y means the buoy is below calm-water level. Match the model to y = A sin(ωx) and state A and ω before doing any arithmetic. Then find the amplitude, the period T (the time for one complete cycle) and the range of the buoy's heights.

Answer

A = −1 and ω = 25. Amplitude = 1 m, period T = 5π s ≈ 15.7 s, range [−1, 1]. The buoy's height stays between 1 m below and 1 m above calm-water level.

Trap

Using the outside number as period, or treating π as decoration inside sine. Copy A and the entire ω before applying their separate formulas.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Input

Definition

Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.

Term

Output

Definition

Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.

Term

Graph

Definition

Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.

Term

x-axis

Definition

Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.

Term

Origin

Definition

Pronounced OR-ih-jin. The point (0, 0) where the axes meet.

Term

Radian

Definition

Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.

Term

Range

Definition

Pronounced raynj. All output values a function actually reaches.

Term

Cycle

Definition

Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.

Term

Symmetry

Definition

Pronounced SIM-uh-tree. A flip or turn that makes a figure match itself.

Term

Constant

Definition

Pronounced KON-stunt. A quantity that stays fixed while the input changes.

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

ω (omega)

Definition

Pronounced oh-MAY-guh. The inside coefficient multiplying x. Its size controls how quickly the angle changes and therefore how wide a cycle is.

Term

Absolute value

Definition

Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.

Term

Amplitude

Definition

Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.

Term

Midline

Definition

Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.

Term

Horizontal stretch

Definition

Pronounced hor-ih-ZON-tul strech. An inside coefficient with 0 < |ω| < 1 lengthens the period beyond 2π.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Coefficient

Definition

Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.

Term

Reciprocal

Definition

Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.

Term

Substitution

Definition

Pronounced sub-stih-TOO-shun. Replacing a letter by a specific value in an equation or expression.

Term

Fundamental period

Definition

Pronounced fun-duh-MEN-tul PEER-ee-ud. The smallest positive repeat distance; this is what period means for the nonconstant waves here.

5. Cofunctions: change the partner and subtract the angle

In plain words

Imagine looking at the same ladder from its two pointed corners.

Rule

Rule: Wherever both sides are defined: sin x = cos(π2 − x), cos x = sin(π2 − x), tan x = cot(π2 − x), cot x = tan(π2 − x), sec x = csc(π2 − x), and csc x = sec(π2 − x). For degree angles, replace π2 with 90° throughout.

Step

  1. 1. Choose the partner: sine with cosine, tangent with cotangent, or secant with cosecant.

  2. 2. Use 90° for degree angles and π2 for radian angles.

  3. 3. Subtract the old angle from that quarter turn. For radian fractions, make the denominators match first.

  4. 4. Write the partner at the resulting angle. Keep any negative result.

  5. 5. Add the old and new arguments to check their quarter turn sum. Check that both functions are defined.

Strategy

  1. Choose the function's partner.

  2. Subtract the old angle from the quarter turn in the same unit.

  3. Keep the sign, check the sum, and check the denominator.

Question

The figure shows the angle 4π5 radians, which is 144°, in standard position. Use a cofunction identity to rewrite sec(4π5) as the cosecant of a single angle in radians. Write that angle as a fraction of π in lowest terms. Show the subtraction with matching denominators. Then check that the old and new angles add to a quarter turn and that both functions are defined.

Answer

sec(4π5) = csc(−3π10)

Trap

Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Cosine

Definition

Pronounced KOH-syne. The sideways coordinate of a point on the unit circle; its graph begins at the top and falls for small positive inputs.

Term

Coordinate

Definition

Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.

Term

x-axis

Definition

Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.

Term

y-axis

Definition

Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.

Term

Radian

Definition

Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.

Term

Unit circle

Definition

Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Cofunctions

Definition

Pronounced KOH-funk-shunz. The partner pairs sine/cosine, tangent/cotangent, and secant/cosecant; each matches its partner at the quarter-turn-minus-angle argument where defined.

Term

Complementary angles

Definition

Pronounced kom-pluh-MEN-tuh-ree ANG-gulz. Two angles whose measures add to 90°, or π2 radians. A cofunction argument can be negative beyond the acute-angle picture.

Term

Tangent

Definition

Pronounced TAN-junt. Sine divided by cosine where cosine is not zero; abbreviated tan.

Term

Cotangent

Definition

Pronounced koh-TAN-junt. Cosine divided by sine where sine is not zero; abbreviated cot and paired with tangent as a cofunction.

Term

Secant

Definition

Pronounced SEE-kant. One divided by cosine wherever cosine is not zero; abbreviated sec and paired with cosecant as a cofunction.

Term

Cosecant

Definition

Pronounced koh-SEE-kant. One divided by sine wherever sine is not zero; abbreviated csc and paired with secant as a cofunction.

Term

Identity

Definition

Pronounced eye-DEN-tih-tee. An equation true for every input where its two sides are defined.

Term

Undefined

Definition

Pronounced un-dih-FYND. Having no assigned value, such as when a function's formula would require division by zero.

Term

Reciprocal

Definition

Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.

Term

Ratio

Definition

Pronounced RAY-shee-oh. One quantity divided by another, comparing their sizes.

Term

Quarter turn

Definition

Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or π2 radians.

Term

Quadrant

Definition

Pronounced KWOD-runt. One of the four regions made by the coordinate axes, numbered counterclockwise from the upper right.

Term

Right triangle

Definition

Pronounced rite TRY-ang-gul. A triangle with one 90° angle. Its other two angles together use the remaining 90°.

Term

Hypotenuse

Definition

Pronounced hy-POT-uh-noos. The longest side of a right triangle, across from its 90° angle.

Term

Clockwise

Definition

Pronounced KLOK-wise. Turning in the direction a clock's hands move; from the rightmost circle point, the first motion is downward.

Term

Counterclockwise

Definition

Pronounced kown-ter-KLOK-wise. Turning opposite a clock's hands; from the rightmost circle point, the first motion is upward.

Term

SOH CAH TOA

Definition

Pronounced soh kah toh-uh. A memory phrase for sine as opposite over hypotenuse, cosine as adjacent over hypotenuse, and tangent as opposite over adjacent.

Term

Degree

Definition

Pronounced duh-GREE. An angle unit defined by convention as one of 360 equal parts of a full turn. The ° sign distinguishes degrees from radians.

Term

Terminal side

Definition

Pronounced TER-mih-nul side. The ray where an angle's turn finishes.

Term

Numerator

Definition

Pronounced NOO-muh-ray-ter. The top of a fraction.

Term

Denominator

Definition

Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.

Term

Rationalizing

Definition

Pronounced RASH-uh-nuh-ly-zing. Rewriting an equivalent fraction to remove a square root from its denominator.

6. Cosine starts at the top and shares the same wave shape

In plain words

Picture the same wheel you used for sine, with its seat beginning at the far right.

Rule

Rule: y = cos x has domain (−∞, ∞), range [−1, 1], period 2π, and cos(−x) = cos x. It begins at (0, 1). Also cos x = sin(x + π2), a shift of sine π2 left. For A cos(ωx), amplitude = |A| and T = 2π|ω| when A ≠ 0 and ω ≠ 0.

Step

  1. 1. Start the parent cosine graph at (0, 1), then read the unit circle's horizontal coordinate at each quarter turn.

  2. 2. For A cos(ωx), read the outside A and inside ω as for sine. Use |A| for amplitude and 2π ÷ |ω| for period.

  3. 3. Keep midline y = 0 and range [−|A|, |A|]. A negative A changes the start from the top to the bottom.

  4. 4. Compare opposite inputs using cos(−u) = cos u. Equal outputs give symmetry about the y-axis. An Even function has equal outputs at opposite inputs. Symmetry about the y-axis means (x, y) matches (−x, y), so the left and right halves mirror each other.

  5. 5. To compare with sine, use cos x = sin(x + π2). Each old sine feature occurs π2 earlier, so the graph moves left.

Strategy

  1. Use the same A and ω formulas as for sine.

  2. At x = 0 cosine equals 1, so the final output equals A.

  3. Use opposite inputs to check even symmetry.

Question

For y = −43 cos(35x), find amplitude, period, range, starting point, and whether opposite inputs give equal outputs. This asks for size, repetition length, achieved heights, and mirror symmetry.

Answer

Amplitude = 43.
Period = 10π3.
Range = [−43, 43].
Starting point = (0, −43).
The function is even, with symmetry about the y-axis.

Strategy

  1. Name the old sine angle of the feature you want, such as π2 for a top.

  2. Set the new inside angle equal to that old angle. This finds where that particular feature moves.

  3. Solve for the new input and plug it back into the inside angle. Keep the old output height.

Trap

Starting cosine at the origin, or confusing cos(−x) with −cos x. Cosine starts at (0, 1). Changing its input sign leaves output unchanged, while an outside minus reflects its heights.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Cosine

Definition

Pronounced KOH-syne. The sideways coordinate of a point on the unit circle; its graph begins at the top and falls for small positive inputs.

Term

Input

Definition

Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.

Term

Output

Definition

Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.

Term

Coordinate

Definition

Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.

Term

Graph

Definition

Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.

Term

x-axis

Definition

Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.

Term

y-axis

Definition

Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.

Term

Origin

Definition

Pronounced OR-ih-jin. The point (0, 0) where the axes meet.

Term

Real number

Definition

Pronounced REE-ul NUM-ber. Any point on the number line, including integers, fractions, and numbers such as π.

Term

Unit circle

Definition

Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).

Term

Domain

Definition

Pronounced doh-MAYN. All allowed inputs of a function.

Term

Range

Definition

Pronounced raynj. All output values a function actually reaches.

Term

Continuous

Definition

Pronounced kun-TIN-yoo-us. A graph without gaps, breaks or jumps; small changes in input produce small changes in output.

Term

Period (T)

Definition

Pronounced PEER-ee-ud tee. The smallest positive horizontal repeat distance of a nonconstant sine or cosine wave.

Term

Cycle

Definition

Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.

Term

Integer

Definition

Pronounced IN-tuh-jer. A whole-number count that can be positive, negative or zero; no fractional part.

Term

Even function

Definition

Pronounced EE-vun FUNK-shun. A function satisfying f(−x) = f(x); opposite inputs give the same output.

Term

Symmetry

Definition

Pronounced SIM-uh-tree. A flip or turn that makes a figure match itself.

Term

Symmetry about the y-axis

Definition

Pronounced SIM-uh-tree uh-BOUT thee why AK-sis. Every point (x, y) has a matching point (−x, y), so the left and right halves mirror each other.

Term

Constant

Definition

Pronounced KON-stunt. A quantity that stays fixed while the input changes.

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

Absolute value

Definition

Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.

Term

Amplitude

Definition

Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.

Term

Midline

Definition

Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.

Term

Maximum

Definition

Pronounced MAK-sih-mum. The largest output reached by a function in the set being considered.

Term

Minimum

Definition

Pronounced MIN-ih-mum. The smallest output reached by a function in the set being considered.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Key points

Definition

Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.

Term

Intercept

Definition

Pronounced IN-ter-sept. A point where a graph meets an axis. An x-intercept has y = 0; a y-intercept has x = 0.

Term

Identity

Definition

Pronounced eye-DEN-tih-tee. An equation true for every input where its two sides are defined.

Term

Undefined

Definition

Pronounced un-dih-FYND. Having no assigned value, such as when a function's formula would require division by zero.

Term

Sinusoidal function

Definition

Pronounced sy-nuh-SOY-dul FUNK-shun. A function whose graph is a sine-shaped or cosine-shaped wave, including its stretches, reflections and shifts.

Term

Horizontal shift

Definition

Pronounced hor-ih-ZON-tul shift. Sliding a graph left or right without changing its shape or height.

Term

Coefficient

Definition

Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.

Term

Reciprocal

Definition

Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.

Term

Interval

Definition

Pronounced IN-ter-vul. A connected stretch of a number line, with notation indicating whether its endpoints are included.

Term

Substitution

Definition

Pronounced sub-stih-TOO-shun. Replacing a letter by a specific value in an equation or expression.

Term

Quarter turn

Definition

Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or π2 radians.

Term

Quadrant

Definition

Pronounced KWOD-runt. One of the four regions made by the coordinate axes, numbered counterclockwise from the upper right.

Term

Right triangle

Definition

Pronounced rite TRY-ang-gul. A triangle with one 90° angle. Its other two angles together use the remaining 90°.

Term

Hypotenuse

Definition

Pronounced hy-POT-uh-noos. The longest side of a right triangle, across from its 90° angle.

Term

Reference angle

Definition

Pronounced REF-er-uns ANG-gul. The acute angle between an angle's terminal ray and the nearest horizontal axis; it helps find coordinate magnitudes.

Term

Clockwise

Definition

Pronounced KLOK-wise. Turning in the direction a clock's hands move; from the rightmost circle point, the first motion is downward.

Term

Counterclockwise

Definition

Pronounced kown-ter-KLOK-wise. Turning opposite a clock's hands; from the rightmost circle point, the first motion is upward.

Term

Increasing

Definition

Pronounced in-KREE-sing. A graph rises as its input moves right through the interval being discussed.

Term

Decreasing

Definition

Pronounced dee-KREE-sing. A graph falls as its input moves right through the interval being discussed.

Term

Radius

Definition

Pronounced RAY-dee-us. The distance from a circle's center to its rim.

Term

Phase shift

Definition

Pronounced fayz shift. The horizontal displacement of a wave from its chosen parent graph.

7. Sketch a complete cycle with five key points

In plain words

Imagine drawing one hill and one valley on a strip of wallpaper.

Rule

Rule: For A ≠ 0 and ω > 0, y = A sin(ωx) or y = A cos(ωx) has T = 2πω. Use the input columns 0, T4, T2, 3T4, T in the key-point picture. Multiply the parent heights by A, connect smoothly, and repeat every T.

Step

  1. 1. Check A and ω for zero. If the graph is nonconstant and ω is negative, rewrite using sin(−u) = −sin u or cos(−u) = cos u to obtain positive ω. Then copy the resulting signed A and positive ω. Find amplitude |A| and T = 2πω.

  2. 2. Divide T by 4 to find the quarter period. Put its successive multiples in an input/output table.

  3. 3. Use the sine or cosine parent heights and multiply each by A. The table is the point-plotting plan.

  4. 4. Draw each column as an ordered pair. Join the points smoothly, with rounded tops and bottoms.

  5. 5. If the requested interval spans several cycles, copy the points by adding or subtracting T from each input. Do not change their heights.

Question

Sketch y = −4 sin(23x) for 0 ≤ x ≤ 3π. This asks you to draw one whole wave, with its five key points, and state its amplitude and period.

Answer

Amplitude = 4
Period T = 3π
Quarter period = 3π4
One cycle begins at the middle going down and returns to the middle going down at x = 3π.

Trap

Trap: Drawing straight segments between the key points makes a zigzag. These points locate a smooth sinusoidal function, so round the turns and cross the middle smoothly.

Strategy

  1. Write A, ω, |A|, T, and T4.

  2. Draw the five-column table using sine or cosine heights. Multiply each parent height by the signed A exactly once; a negative A already performs the reflection.

  3. Plot the points and connect smoothly. Copy by T to cover the requested interval.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Cosine

Definition

Pronounced KOH-syne. The sideways coordinate of a point on the unit circle; its graph begins at the top and falls for small positive inputs.

Term

Input

Definition

Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.

Term

Output

Definition

Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.

Term

Coordinate

Definition

Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.

Term

Ordered pair

Definition

Pronounced OR-derd pair. Two coordinates written as (x, y), horizontal first and vertical second.

Term

Graph

Definition

Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.

Term

Origin

Definition

Pronounced OR-ih-jin. The point (0, 0) where the axes meet.

Term

Radian

Definition

Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.

Term

Unit circle

Definition

Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).

Term

Periodic function

Definition

Pronounced peer-ee-OD-ik FUNK-shun. A function with a positive repeat distance p such that f(x + p) = f(x) for every input.

Term

Cycle

Definition

Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.

Term

Integer

Definition

Pronounced IN-tuh-jer. A whole-number count that can be positive, negative or zero; no fractional part.

Term

Constant

Definition

Pronounced KON-stunt. A quantity that stays fixed while the input changes.

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

Absolute value

Definition

Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.

Term

Amplitude

Definition

Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.

Term

Midline

Definition

Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.

Term

Maximum

Definition

Pronounced MAK-sih-mum. The largest output reached by a function in the set being considered.

Term

Minimum

Definition

Pronounced MIN-ih-mum. The smallest output reached by a function in the set being considered.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Key points

Definition

Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.

Term

Quarter period

Definition

Pronounced KWOR-ter PEER-ee-ud. One fourth of the full cycle's horizontal length, T ÷ 4.

Term

Sinusoidal function

Definition

Pronounced sy-nuh-SOY-dul FUNK-shun. A function whose graph is a sine-shaped or cosine-shaped wave, including its stretches, reflections and shifts.

Term

Exact value

Definition

Pronounced ig-ZAKT VAL-yoo. A value written without rounding, often as a fraction, π expression or square root.

Term

Coefficient

Definition

Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.

Term

Reciprocal

Definition

Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.

Term

Interval

Definition

Pronounced IN-ter-vul. A connected stretch of a number line, with notation indicating whether its endpoints are included.

Term

Substitution

Definition

Pronounced sub-stih-TOO-shun. Replacing a letter by a specific value in an equation or expression.

Term

Denominator

Definition

Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.

8. Read a wave and write its equation

In plain words

Imagine finding a label for a repeating wallpaper pattern.

Rule

Rule: For nonconstant y = A sin(ωx) or y = A cos(ωx), centered at y = 0 with ω > 0, amplitude a = maximum−minimum2 and ω = 2πT. At x = 0: middle up chooses a sin; middle down chooses −a sin; top chooses a cos; bottom chooses −a cos.

Step

  1. 1. Confirm that the midline is y = 0 and that the problem uses an unshifted sine or cosine wave. This is the family the four-start method identifies.

  2. 2. Find the amplitude from half the vertical span. It is positive for a changing wave.

  3. 3. At x = 0, choose sine or cosine and the sign of A from the starting height and direction. Set |A| equal to the amplitude.

  4. 4. Measure the horizontal distance from one point to the next matching point with the same direction. That distance is T.

  5. 5. Solve ωT = 2π by dividing both sides by T. Choose ω = 2πT > 0 and write the equation.

  6. 6. Substitute the five quarter-period inputs into the equation. Compare all five outputs with the graph, and verify ωT = 2π.

Question

The pictured unshifted wave centered at y = 0 has a maximum of 8, a minimum of −8, a full cycle of 10, and is at the bottom at x = 0. Find its amplitude, period, positive ω, and equation. In plain words, use the pictured wave to name the sine or cosine rule that produces it.

Answer

Amplitude = 8
Period T = 10
ω = π5
y = −8 cos(π5x)

Trap

Trap: The four-start method assumes an unshifted wave centered at y = 0 and a positive ω. A wave with another midline or an arbitrary horizontal shift needs the later transformation method.

Strategy

  1. Confirm the family and y = 0 midline. Choose positive ω.

  2. Measure amplitude, read the starting position and direction, and choose signed A with sine or cosine.

  3. Measure one complete repeat T and calculate ω = 2πT.

  4. Write the equation and check all five quarter-period points.

Term

Sine

Definition

Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.

Term

Cosine

Definition

Pronounced KOH-syne. The sideways coordinate of a point on the unit circle; its graph begins at the top and falls for small positive inputs.

Term

Input

Definition

Pronounced IN-put. The number you put into a function. On a function graph it is the horizontal coordinate.

Term

Output

Definition

Pronounced OUT-put. The value returned by a function. On a function graph it is the vertical coordinate.

Term

Coordinate

Definition

Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.

Term

Graph

Definition

Pronounced graf. A picture of the input-output pairs that satisfy a function's equation.

Term

y-axis

Definition

Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.

Term

Origin

Definition

Pronounced OR-ih-jin. The point (0, 0) where the axes meet.

Term

Radian

Definition

Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.

Term

Domain

Definition

Pronounced doh-MAYN. All allowed inputs of a function.

Term

Range

Definition

Pronounced raynj. All output values a function actually reaches.

Term

Cycle

Definition

Pronounced SY-kul. One complete run through a wave's repeating pattern; its horizontal length is the period.

Term

Symmetry

Definition

Pronounced SIM-uh-tree. A flip or turn that makes a figure match itself.

Definition

Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.

Term

ω (omega)

Definition

Pronounced oh-MAY-guh. The inside coefficient multiplying x. Its size controls how quickly the angle changes and therefore how wide a cycle is.

Term

Absolute value

Definition

Pronounced AB-suh-loot VAL-yoo. A number's distance from 0; it keeps size and removes a negative sign.

Term

Amplitude

Definition

Pronounced AM-plih-tood. The vertical distance from a wave's midline to its top or bottom; half the maximum-to-minimum distance.

Term

Midline

Definition

Pronounced MID-lyne. The horizontal line halfway between a wave's maximum and minimum.

Term

Maximum

Definition

Pronounced MAK-sih-mum. The largest output reached by a function in the set being considered.

Term

Minimum

Definition

Pronounced MIN-ih-mum. The smallest output reached by a function in the set being considered.

Term

Reflection

Definition

Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.

Term

Point plotting

Definition

Pronounced point PLOT-ing. Finding input-output pairs, placing their points, and using the function's shape to connect them.

Term

Key points

Definition

Pronounced kee points. Five points spaced one quarter period apart that anchor one sine or cosine cycle.

Term

Quarter period

Definition

Pronounced KWOR-ter PEER-ee-ud. One fourth of the full cycle's horizontal length, T ÷ 4.

Term

Cofunction identities

Definition

Pronounced KOH-funk-shun eye-DEN-tih-teez. Equalities replacing a trig function by its cofunction at π2 − x, or 90° − x, wherever both sides are defined.

Term

Horizontal shift

Definition

Pronounced hor-ih-ZON-tul shift. Sliding a graph left or right without changing its shape or height.

Term

Coefficient

Definition

Pronounced koh-uh-FISH-unt. A number multiplying a variable or expression, whether written explicitly or understood.

Term

Substitution

Definition

Pronounced sub-stih-TOO-shun. Replacing a letter by a specific value in an equation or expression.

Term

Quarter turn

Definition

Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or π2 radians.

Term

Degree

Definition

Pronounced duh-GREE. An angle unit defined by convention as one of 360 equal parts of a full turn. The ° sign distinguishes degrees from radians.

Term

Phase shift

Definition

Pronounced fayz shift. The horizontal displacement of a wave from its chosen parent graph.