Quarry School

Trigonometry — crash course

Angles and their measure

The pieces of an angle and how to name them

In plain words

Picture a door viewed from above.

Rule

A line has no endpoints, a line segment has two, and a ray has one. In ray OP, O is the endpoint. In ∠AOB, O is the vertex; ∠BOA names the same geometric corner.

Step

  1. Count the endpoints to decide whether you have a line, line segment or ray.

  2. For a ray, write the endpoint first and then any point farther along it.

  3. For an angle, identify the shared endpoint and put its letter in the middle.

  4. Use one point from each side as the other two letters. A single letter such as θ or a number such as 1 can also label the angle.

  5. In the table picture, the column under θ gives theta and THAY-tuh. Read each Greek letter by its own name before using it to label an angle.

Question

You are identifying the shared point, the two rays and two names for their corner. Rays OA and OB start at O. Point A is above O and point B is to its right. Name the vertex, both rays and the angle in two ways.

Answer

Vertex: O.
Rays: OA and OB.
Angle: ∠AOB or ∠BOA.

Trap

Naming the angle ∠OAB. Its middle letter is A, so that name asks for a corner at A. Point to the hinge first, then put its letter in the middle.

Strategy

  1. Count the endpoints and continuing directions.

  2. Use the object word to distinguish a line, segment, or ray.

  3. For a ray, write its endpoint first, then a point in its forward direction.

  4. For an angle, find the common endpoint and put its letter between one letter from each side.

  5. Read the name back and check that it sends you to the intended object.

Term

Line

Definition

A straight path that continues forever in both directions. Two points on it can name it.

Term

Line segment

Definition

A straight piece of a line with two endpoints. It stops at both ends.

Term

Endpoint

Definition

A point where a line segment stops or where a ray begins.

Term

Point

Definition

An exact location. A point has no width or length.

Term

Ray

Definition

A straight path that begins at one endpoint and continues forever in one direction.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Side of an angle

Definition

Either of the two rays that form an angle.

Term

Vertex

Definition

The endpoint shared by an angle's two rays. It is the middle letter in a three-letter angle name.

Term

Greek letters

Definition

Letters from the Greek alphabet often used as names for angles.

Term

α (alpha)

Definition

The Greek letter alpha, often used to name an angle.

Term

β (beta)

Definition

The Greek letter beta, often used to name an angle.

Term

γ (gamma)

Definition

The Greek letter gamma, often used to name an angle.

Term

δ (delta)

Definition

The Greek letter delta, often used to name an angle.

Term

θ (theta)

Definition

The Greek letter theta, commonly used to name an angle or its measure.

Term

φ (phi)

Definition

The Greek letter phi, often used to name an angle.

An angle records a turn and its direction

In plain words

Picture a clock hand you can move yourself.

Rule

Positive angle: counterclockwise rotation. Negative angle: clockwise rotation. The sign depends only on the direction of the turn, regardless of the initial side.

Step

  1. Locate the initial side, the hand's starting position.

  2. Follow the curved arrow from that starting ray to the terminal side.

  3. Use a positive sign for counterclockwise and a negative sign for clockwise.

  4. Count the whole movement, including any full laps. Do not assign a sign from the ending ray's location.

Question

You are recording the amount and direction of the turn and where it finishes. The initial side points straight up, at direction 90° from the right. Turn counterclockwise through 50°. What is the signed angle, and which direction does the terminal side point?

Answer

Signed angle: +50°.
Terminal direction: 140° from the right, pointing up and left.

Trap

Calling an angle negative because its terminal side points downward. You can turn counterclockwise through 300° and end downward. The arrow's direction gives the sign; the final location does not.

Strategy

  1. Mark the initial side and identify the curved arrow's direction.

  2. Give a counterclockwise movement a positive sign or a clockwise movement a negative sign.

  3. Include every completed lap in the measurement.

  4. When the question requests a final direction from right, add the signed movement to the starting direction measured from right.

  5. Undo the movement with an equal turn in the opposite direction to check your result.

Term

Line

Definition

A straight path that continues forever in both directions. Two points on it can name it.

Term

Endpoint

Definition

A point where a line segment stops or where a ray begins.

Term

Point

Definition

An exact location. A point has no width or length.

Term

Ray

Definition

A straight path that begins at one endpoint and continues forever in one direction.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Side of an angle

Definition

Either of the two rays that form an angle.

Term

Vertex

Definition

The endpoint shared by an angle's two rays. It is the middle letter in a three-letter angle name.

Term

Initial side

Definition

The ray where an angle's rotation begins.

Term

Terminal side

Definition

The ray where an angle's rotation ends.

Term

Rotation

Definition

A turn around a fixed point. Its amount can be smaller than, equal to, or larger than a full revolution.

Term

Clockwise

Definition

Turning in the direction a clock's hands normally move.

Term

Counterclockwise

Definition

Turning in the direction opposite to a clock's usual hand movement.

Term

Positive angle

Definition

An angle whose recorded rotation goes counterclockwise. Its sign describes direction, not which quadrant contains its terminal side.

Term

Negative angle

Definition

An angle whose recorded rotation goes clockwise. Its sign describes direction, not whether its terminal side points left or right.

Term

Full revolution

Definition

One complete turn that brings a rotating ray back to its starting position. Its size is 360° or 2π radians.

Term

Standard position

Definition

An angle placement with vertex at the origin and initial side along the positive x-axis.

Term

Coterminal angles

Definition

Angles with the same initial and terminal sides whose measures differ by an integer number of full revolutions.

Term

Circle

Definition

All the points in a flat surface that are the same distance from one center point.

Term

Center

Definition

The point inside a circle equally distant from every point on the circle.

Term

Radius

Definition

A line segment from a circle's center to its rim, or the length of that segment.

Coterminal angles: keep the landing, change the journey

In plain words

Think of a runner on a circular track.

Rule

An integer n counts complete laps and may be positive, negative, or zero. 360°n means 360° × n.
In degrees, all angles coterminal with θ have measures θ + 360°n, where n is any integer. For a one-turn representative use 0° ≤ θ < 360°: an angle that ends on the initial ray, such as 360° or −720°, has one-turn representative 0°.

Step

  1. Keep the initial side fixed. A shared terminal ray alone is not enough if the starting rays differ.

  2. If the measurement is negative, add 360° until it is at least 0°.

  3. If it is 360° or more, subtract 360° until it is less than 360°.

  4. For two positive and two negative answers, continue adding or subtracting full turns until you have two distinct answers of each sign.

  5. Check each answer by subtracting the original measure. The difference must be an integer multiple of 360°.

Question

An angle of 1185° is in standard position: vertex at the origin, initial side along the positive x-axis. (a) Find the angle θ with 0° ≤ θ < 360° that is coterminal with 1185°. (b) Find two positive angles and two negative angles, other than 1185° itself, that are coterminal with 1185°, and check each one.

Answer

(a) θ = 105°, since 1185° = 105° + 360° × 3. (b) Positive: 105° and 465°. Negative: -255° and -615°. Other choices are also correct, such as 825° or -975°, because any 1185° + 360°n with n a nonzero integer is coterminal with 1185°.

Trap

Subtracting 180° to make an angle smaller. A half turn points in the opposite direction. Use a whole 360° turn when you must keep the same terminal side.

Strategy

  1. Keep the initial side fixed and write one turn as 360°.

  2. For a one-turn representative, add 360° while the angle is negative and subtract 360° while it is at least 360°.

  3. For several positive or negative coterminals, continue adding or subtracting full turns until every requested sign has the required number of distinct answers.

  4. Check both the requested interval or signs and the full-turn differences.

Term

Line

Definition

A straight path that continues forever in both directions. Two points on it can name it.

Term

Ray

Definition

A straight path that begins at one endpoint and continues forever in one direction.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Vertex

Definition

The endpoint shared by an angle's two rays. It is the middle letter in a three-letter angle name.

Term

Initial side

Definition

The ray where an angle's rotation begins.

Term

Terminal side

Definition

The ray where an angle's rotation ends.

Term

Rotation

Definition

A turn around a fixed point. Its amount can be smaller than, equal to, or larger than a full revolution.

Term

Clockwise

Definition

Turning in the direction a clock's hands normally move.

Term

Counterclockwise

Definition

Turning in the direction opposite to a clock's usual hand movement.

Term

Positive angle

Definition

An angle whose recorded rotation goes counterclockwise. Its sign describes direction, not which quadrant contains its terminal side.

Term

Negative angle

Definition

An angle whose recorded rotation goes clockwise. Its sign describes direction, not whether its terminal side points left or right.

Term

Full revolution

Definition

One complete turn that brings a rotating ray back to its starting position. Its size is 360° or 2π radians.

Term

Standard position

Definition

An angle placement with vertex at the origin and initial side along the positive x-axis.

Term

Origin

Definition

The point (0, 0), where the x-axis and y-axis meet.

Term

x-axis

Definition

The horizontal coordinate line. Points on it have y = 0.

Term

y-axis

Definition

The vertical coordinate line. Points on it have x = 0.

Term

Positive x-axis

Definition

The part of the horizontal axis pointing right from the origin.

Term

Quadrant

Definition

One of the four open regions between the coordinate axes. The axes themselves belong to no quadrant.

Term

Coterminal angles

Definition

Angles with the same initial and terminal sides whose measures differ by an integer number of full revolutions.

Term

Right angle

Definition

An angle of 90°, which is one quarter of a full revolution.

Term

Circle

Definition

All the points in a flat surface that are the same distance from one center point.

Term

Center

Definition

The point inside a circle equally distant from every point on the circle.

Term

Integer

Definition

A whole-number count, positive or negative, or zero. It has no fractional part.

A common start makes the landing place meaningful

In plain words

Imagine several people giving you directions with arrows.

Rule

Coordinates (x, y) give the horizontal position first and vertical position second; (0, 0) records zero in both directions.
Standard position means vertex at (0, 0) and initial side on the positive x-axis. The Roman numerals I, II, III, IV mean 1, 2, 3, 4 and name the regions upper right, upper left, lower left, lower right, in counterclockwise order. A quadrantal angle ends on an axis.

Step

  1. Check that the vertex is at the origin and the initial side points right. Otherwise the angle is not in standard position.

  2. Draw the landmarks: right 0°, up 90°, left 180°, down 270°, right again 360°.

  3. Locate the terminal ray between two landmarks and name the quadrant, starting I in the upper right.

  4. If the terminal ray is exactly on an axis, call the angle quadrantal and name the axis instead of a quadrant.

  5. For several turns, remove complete revolutions before comparing to the landmarks.

  6. In the table picture, read a column under Positive x-axis, right, then compare the matching information below it. Each column preserves one complete row of the reference table.

Question

You are locating each finishing ray in a region or on an axis. In standard position, where do the terminal sides of 140° and 270° lie?

Answer

140°: Quadrant II.
270°: negative y-axis, a quadrantal angle.

Trap

Saying an angle of 90° is in Quadrant I. The upper-right region ends before its boundary. Exactly 90° is on the positive y-axis.

Strategy

  1. Check the vertex at the origin and the initial ray on the positive x-axis.

  2. Use a coterminal measurement in 0° ≤ θ < 360° when the turn has extra or negative laps.

  3. Mark the right, up, left, and down landmarks at 0°, 90°, 180°, and 270°.

  4. If the terminal ray matches a landmark, name its axis and call it quadrantal.

  5. Otherwise compare its measure with neighboring landmarks and name the region between them.

Term

Line

Definition

A straight path that continues forever in both directions. Two points on it can name it.

Term

Point

Definition

An exact location. A point has no width or length.

Term

Ray

Definition

A straight path that begins at one endpoint and continues forever in one direction.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Vertex

Definition

The endpoint shared by an angle's two rays. It is the middle letter in a three-letter angle name.

Term

Initial side

Definition

The ray where an angle's rotation begins.

Term

Terminal side

Definition

The ray where an angle's rotation ends.

Term

Clockwise

Definition

Turning in the direction a clock's hands normally move.

Term

Counterclockwise

Definition

Turning in the direction opposite to a clock's usual hand movement.

Term

Negative angle

Definition

An angle whose recorded rotation goes clockwise. Its sign describes direction, not whether its terminal side points left or right.

Term

Full revolution

Definition

One complete turn that brings a rotating ray back to its starting position. Its size is 360° or 2π radians.

Term

Degree (°)

Definition

An angle unit equal to one of 360 equal parts of a full revolution.

Term

Standard position

Definition

An angle placement with vertex at the origin and initial side along the positive x-axis.

Term

Rectangular coordinate system

Definition

A map of locations using a horizontal x-axis and a vertical y-axis that meet at a right angle.

Term

Origin

Definition

The point (0, 0), where the x-axis and y-axis meet.

Term

x-axis

Definition

The horizontal coordinate line. Points on it have y = 0.

Term

y-axis

Definition

The vertical coordinate line. Points on it have x = 0.

Term

Positive x-axis

Definition

The part of the horizontal axis pointing right from the origin.

Term

Quadrant

Definition

One of the four open regions between the coordinate axes. The axes themselves belong to no quadrant.

Term

Quadrantal angle

Definition

An angle in standard position whose terminal side lies on a coordinate axis.

Term

Right angle

Definition

An angle of 90°, which is one quarter of a full revolution.

Term

Straight angle

Definition

An angle of 180°, whose two sides point in opposite directions along one straight line.

Term

Center

Definition

The point inside a circle equally distant from every point on the circle.

Term

Integer

Definition

A whole-number count, positive or negative, or zero. It has no fractional part.

Term

Coordinate axis

Definition

One of the two crossing number lines used to locate points: the x-axis or y-axis.

Angle sizes and two ways to fill a corner

In plain words

Picture opening a door from its closed position.

Rule

Acute: 0° < θ < 90°. Right: θ = 90°. Obtuse: 90° < θ < 180°. Straight: θ = 180°. Positive complements sum to 90°; positive supplements sum to 180°.

Step

  1. Compare the angle to 0°, 90° and 180° to classify its size.

  2. For a complement, subtract from 90° and require the result to be positive.

  3. For a supplement, subtract from 180° and require the result to be positive.

  4. Add the proposed pair to check the total. Do not use a negative leftover as a positive complement.

  5. In the table picture, read a column under Acute angle, then compare the matching information below it. Each column preserves one complete row of the reference table.

Question

You are comparing openings and finding the positive pieces needed to complete 90° and 180° where possible. Find the complement and supplement of 32°. Then decide whether 113° has a positive complement and find its supplement.

Answer

32° complement: 58°.
32° supplement: 148°.
113° complement: no positive complement.
113° supplement: 67°.

Trap

Interchanging complement and supplement. Remember C comes before S: Complement fills the smaller 90° corner; Supplement fills the larger 180° corner.

Strategy

  1. Compare the angle with 0°, 90°, and 180°; equality identifies a right or straight angle.

  2. If a complement is requested, subtract from 90° to find the unused piece.

  3. If a supplement is requested, subtract from 180° to find the unused piece.

  4. Reject a zero or negative piece when the notes require a positive pair.

  5. Add the original angle and the proposed missing piece to verify 90° or 180°.

Term

Line

Definition

A straight path that continues forever in both directions. Two points on it can name it.

Term

Point

Definition

An exact location. A point has no width or length.

Term

Ray

Definition

A straight path that begins at one endpoint and continues forever in one direction.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Vertex

Definition

The endpoint shared by an angle's two rays. It is the middle letter in a three-letter angle name.

Term

Full revolution

Definition

One complete turn that brings a rotating ray back to its starting position. Its size is 360° or 2π radians.

Term

Right angle

Definition

An angle of 90°, which is one quarter of a full revolution.

Term

Straight angle

Definition

An angle of 180°, whose two sides point in opposite directions along one straight line.

Term

Acute angle

Definition

An angle greater than 0° and smaller than 90°. It is narrower than a right angle.

Term

Obtuse angle

Definition

An angle greater than 90° and smaller than 180°. It is wider than a right angle but smaller than a straight angle.

Term

Complementary angles

Definition

Two positive angles whose measures add to 90°.

Term

Supplementary angles

Definition

Two positive angles whose measures add to 180°.

Term

β (beta)

Definition

The Greek letter beta, often used to name an angle.

Degrees, minutes and seconds: smaller pieces of a turn

In plain words

Picture a shop that lets you exchange one large token for 60 smaller tokens, and each small token for 60 tiny ones.

Rule

1° = 60′ = 3600″ and 1′ = 60″. Decimal degrees = D + M60 + S3600. For subtraction: 90° = 89°59′60″ and 180° = 179°59′60″.
Here D, M, and S count degrees, minutes, and seconds, respectively.

Step

  1. For DMS subtraction, align the degree, minute and second columns. If needed, borrow one degree as 60 minutes, then one minute as 60 seconds.

  2. Subtract each column after the units are available. Check by adding your answer to the original angle.

  3. For DMS to decimal degrees, keep the degrees and add minutes ÷ 60 and seconds ÷ 3600.

  4. For decimal degrees to DMS, keep the whole degrees. Multiply only the leftover decimal by 60; keep its whole minutes.

  5. Multiply the new leftover decimal minute by 60 for seconds. Round at the end; if seconds round to 60, carry one minute. If minutes reach 60, carry one degree.

  6. In the table picture, read a column under Degree, °, then compare the matching information below it. Each column preserves one complete row of the reference table.

Question

A triangular plot of land has corners P, Q and R. A surveyor measures the angle at Q as ∠Q = 48°37′25″. A mapping program lists the angle at P in decimal degrees as ∠P = 63.4333°. (a) Write ∠P in degrees, minutes and seconds, rounded to the nearest second. (b) The three angles of a triangle add to 180°. Using your answer to (a), find ∠R in degrees, minutes and seconds. (c) Write ∠R in decimal degrees, rounded to four decimal places.

Answer

(a) ∠P ≈ 63°26′0″; (b) ∠R = 67°56′35″; (c) ∠R ≈ 67.9431°

Trap

Treating DMS as decimal digits. 6′ is 660° = 0.1°, not 0.06°. Borrow and carry in groups of 60, not 100.

Strategy

  1. Read the requested operation and label the units in each column.

  2. For DMS subtraction, exchange larger pieces until each smaller column has enough, then subtract matching columns.

  3. For DMS to decimal degrees, use D + M60 + S3600 before the final rounding.

  4. For decimal degrees to DMS, keep the whole degrees, multiply the leftover by 60, keep the whole minutes, and multiply their leftover by 60.

  5. Round seconds as requested and carry complete groups of sixty.

  6. Check subtraction by addition, or check conversion by converting the unrounded value back.

Term

Line

Definition

A straight path that continues forever in both directions. Two points on it can name it.

Term

Point

Definition

An exact location. A point has no width or length.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Clockwise

Definition

Turning in the direction a clock's hands normally move.

Term

Minute (′)

Definition

An angle unit equal to 160 of a degree. It measures angle, not elapsed time.

Term

Second (″)

Definition

An angle unit equal to 160 of a minute or 13600 of a degree.

Term

DMS notation

Definition

Writing an angle in degrees, minutes, and seconds, with symbols °, ′, and ″.

Term

Decimal degrees

Definition

Writing an angle as a number of degrees with a decimal part instead of separate minutes and seconds.

Term

Approximation

Definition

A value close to the exact amount, often obtained by rounding. The symbol ≈ means approximately equal.

Term

Degree measurement

Definition

Expressing the amount and direction of a turn using degrees.

Term

Numerator

Definition

The top number or expression in a fraction. It counts pieces of the size named by the denominator.

Term

Denominator

Definition

The bottom number or expression in a fraction. It tells the size of each counted piece. It cannot be zero.

Term

Common denominator

Definition

A shared bottom number used to rewrite fractions into matching-sized pieces before adding or subtracting them.

Radians count radius-lengths of curved distance

In plain words

Imagine laying a flexible measuring tape around a round table.

Rule

For a nonnegative central opening, θ = sr radians, where s is the chosen arc length and r > 0 is the radius; signed turns use the direction rule.
180° = π radians; a full revolution is 360° = 2π radians.

Step

  1. Locate the center and the two radii forming the central angle. Follow the curved arc between their endpoints, because s measures the edge rather than a straight shortcut.

  2. Express s and r in the same length unit, because their ratio must compare equal kinds of length.

  3. Divide arc length by radius: θ = sr. The result counts radius-lengths, so it is in radians.

  4. Write a degree sign for degrees. For radians, write the word when clarification helps; the instructor's notation usually omits a unit symbol.

  5. Rebuild familiar angles from the half-turn fact 180° = π. The table is a reference you can reconstruct, not a separate set of facts to memorize.

  6. In the table picture, the column under 30° gives π6 because six 30° pieces make 180°. Read the other columns the same way and rebuild each from 180° = π.

Question

You are finding the arc-to-radius count before and after doubling all lengths. An arc is 7.5 cm long on a circle of radius 5 cm. Find its central angle in radians. Then enlarge the circle and arc to twice their size.

Answer

Original circle: 1.5 radians.
Enlarged circle: 1.5 radians.

Trap

Reading 30 and 30° as the same angle. In the instructor's angle notation, a number without a degree sign is in radians. Write ° whenever the measurement is in degrees, and say radians when a bare number could be unclear.

Strategy

  1. Find the circle's center and identify the central angle's two sides.

  2. Choose the arc described by the question and read its curved length s.

  3. Put arc length and radius in the same length unit.

  4. Compute θ = sr to count radius-lengths; label the result radians when helpful.

  5. If the whole picture is enlarged, check that arc and radius enlarge by the same factor so their ratio stays unchanged.

Term

Line

Definition

A straight path that continues forever in both directions. Two points on it can name it.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Vertex

Definition

The endpoint shared by an angle's two rays. It is the middle letter in a three-letter angle name.

Term

Initial side

Definition

The ray where an angle's rotation begins.

Term

Terminal side

Definition

The ray where an angle's rotation ends.

Term

Clockwise

Definition

Turning in the direction a clock's hands normally move.

Term

Counterclockwise

Definition

Turning in the direction opposite to a clock's usual hand movement.

Term

Full revolution

Definition

One complete turn that brings a rotating ray back to its starting position. Its size is 360° or 2π radians.

Term

Right angle

Definition

An angle of 90°, which is one quarter of a full revolution.

Term

Straight angle

Definition

An angle of 180°, whose two sides point in opposite directions along one straight line.

Term

Central angle

Definition

An angle whose vertex is at a circle's center.

Term

Circle

Definition

All the points in a flat surface that are the same distance from one center point.

Term

Center

Definition

The point inside a circle equally distant from every point on the circle.

Term

Radius

Definition

A line segment from a circle's center to its rim, or the length of that segment.

Term

Circumference

Definition

The distance all the way around a circle. Its formula is C = 2πr.

Term

Arc

Definition

A curved piece of a circle's rim.

Term

Radian

Definition

An angle unit: one radian is the central angle whose arc length equals the circle's radius.

Term

Radian measure

Definition

An angle's size expressed in radians. For a positive central angle, divide arc length by radius: θ = sr.

Term

Arc length (s)

Definition

The distance measured along an arc. For a positive central angle in radians, s = rθ.

Term

θ (theta)

Definition

The Greek letter theta, commonly used to name an angle or its measure.

Term

Degree measurement

Definition

Expressing the amount and direction of a turn using degrees.

Term

Numerator

Definition

The top number or expression in a fraction. It counts pieces of the size named by the denominator.

Term

Denominator

Definition

The bottom number or expression in a fraction. It tells the size of each counted piece. It cannot be zero.

Convert the unit, then locate a radian angle

In plain words

Think of a road sign that gives the same distance in miles and kilometers.

Rule

Degrees → radians: multiply by πradians180°. Radians → degrees: multiply by 180°πradians.
Radian coterminal angles are θ + 2πn, where n is any integer; reduce to 0 ≤ θ < 2π before locating the terminal side.

Step

  1. Identify the starting unit. A degree sign means degrees; the instructor's angle notation without that sign means radians.

  2. Write the multiplier with the starting unit on the bottom, because the matching unit on top and bottom then cancels.

  3. Multiply the numerators and denominators and reduce common factors. Treat π as one factor, because it cancels only against another π.

  4. Keep an exact π fraction when possible. If a decimal degree answer is requested, calculate from the exact expression and round at the end.

  5. To locate a radian angle, add or subtract 2π until it is in 0 ≤ θ < 2π. Use a common denominator when adding or subtracting π fractions.

  6. Compare with the exact quarter-turn boundaries. Equality means the angle is quadrantal and belongs to no quadrant; decimal landmarks are rounded guides.

  7. In the table picture, read a column under I, then compare the matching information below it. Each column preserves one complete row of the reference table.

Question

You are changing the measuring unit in both directions and locating both terminal rays. Convert 225° to radians, then convert 7π6 radians to degrees. Locate both terminal sides.

Answer

225° = 5π4 radians, Quadrant III.
7π6 radians = 210°, Quadrant III.

Trap

Using a rounded boundary such as 1.57 as though it were exactly π2. An angle of 1.57 radians is slightly below the exact axis value. Use exact π boundaries for exact angles, and use the decimals only when the angle lies clearly between them.

Strategy

  1. Identify whether the starting angle uses degrees or radians.

  2. Write the conversion fraction with the old unit underneath and the desired unit on top.

  3. Multiply, cancel matching factors, and reduce the result; keep π exact when an exact answer is requested.

  4. If location is requested, reduce negative or large angles into one revolution by full-turn additions or subtractions.

  5. Rebuild the quarter-turn boundaries and compare the reduced measure with them.

  6. Check with the opposite conversion or the angle's fraction of a half turn.

Term

Endpoint

Definition

A point where a line segment stops or where a ray begins.

Term

Ray

Definition

A straight path that begins at one endpoint and continues forever in one direction.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Terminal side

Definition

The ray where an angle's rotation ends.

Term

Clockwise

Definition

Turning in the direction a clock's hands normally move.

Term

Negative angle

Definition

An angle whose recorded rotation goes clockwise. Its sign describes direction, not whether its terminal side points left or right.

Term

Full revolution

Definition

One complete turn that brings a rotating ray back to its starting position. Its size is 360° or 2π radians.

Term

Standard position

Definition

An angle placement with vertex at the origin and initial side along the positive x-axis.

Term

Origin

Definition

The point (0, 0), where the x-axis and y-axis meet.

Term

x-axis

Definition

The horizontal coordinate line. Points on it have y = 0.

Term

y-axis

Definition

The vertical coordinate line. Points on it have x = 0.

Term

Positive x-axis

Definition

The part of the horizontal axis pointing right from the origin.

Term

Quadrant

Definition

One of the four open regions between the coordinate axes. The axes themselves belong to no quadrant.

Term

Coterminal angles

Definition

Angles with the same initial and terminal sides whose measures differ by an integer number of full revolutions.

Term

Circle

Definition

All the points in a flat surface that are the same distance from one center point.

Term

Center

Definition

The point inside a circle equally distant from every point on the circle.

Term

Radian

Definition

An angle unit: one radian is the central angle whose arc length equals the circle's radius.

Term

Radian measure

Definition

An angle's size expressed in radians. For a positive central angle, divide arc length by radius: θ = sr.

Term

Exact value

Definition

A value stated without rounding. Fractions and expressions containing π can preserve the full amount.

Term

Integer

Definition

A whole-number count, positive or negative, or zero. It has no fractional part.

Term

Degree measurement

Definition

Expressing the amount and direction of a turn using degrees.

Term

Numerator

Definition

The top number or expression in a fraction. It counts pieces of the size named by the denominator.

Term

Denominator

Definition

The bottom number or expression in a fraction. It tells the size of each counted piece. It cannot be zero.

Term

Common denominator

Definition

A shared bottom number used to rewrite fractions into matching-sized pieces before adding or subtracting them.

Arc length: how far you travel around the rim

In plain words

Imagine walking along the curved edge of a circular garden.

Rule

s = rθ; θ = sr; r = sθ when θ > 0. θ must be in radians.
For one physical slice, r > 0 and 0 ≤ θ ≤ 2π; arc length is a nonnegative size, also called its magnitude.

Step

  1. Identify the chosen arc, its radius and its central angle. Use the physical opening's nonnegative size, because the length measures distance rather than clockwise or counterclockwise direction. Magnitude means size with the direction sign removed: −75° has magnitude 75°. A chosen 300° arc remains 300°; using 60° would select a different arc.

  2. If the angle is in degrees, convert it to radians first by multiplying by πradians180°.

  3. Choose the form that isolates the missing quantity: multiply rθ for length, divide s by r for angle, or divide s by θ for radius.

  4. Use matching length units for s and r. Keep exact π expressions through the calculation and round only the final decimal answer.

  5. Check independently using the angle's fraction of a full turn times the circumference. For a slice no larger than the whole circle, its arc cannot exceed 2πr.

Question

You are finding distance along the specified curved rim and expressing that length exactly and as a rounded decimal. A circle has radius 8 cm. Find the arc cut off by a 75° central angle, exactly and to two decimal places.

Answer

Exact arc length: 10π3 cm.
Rounded arc length: approximately 10.47 cm.

Trap

Putting 75 directly into s = rθ when the opening is 75°. The formula counts radius-lengths, so θ must be 5π12 radians. Write the conversion before substituting, and keep the answer in a length unit rather than degrees.

Strategy

  1. Identify the chosen arc, central opening, and radius from the question.

  2. Use the nonnegative size of that chosen opening and convert degrees to radians if necessary.

  3. Find which quantity is missing: arc length, central angle, or radius.

  4. Use s = rθ, θ = sr, or r = sθ to leave that unknown alone.

  5. Check matching length units and label the requested answer.

  6. Verify with the fraction of a full turn times the circumference or by substituting the recovered quantity back.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Clockwise

Definition

Turning in the direction a clock's hands normally move.

Term

Counterclockwise

Definition

Turning in the direction opposite to a clock's usual hand movement.

Term

Central angle

Definition

An angle whose vertex is at a circle's center.

Term

Circle

Definition

All the points in a flat surface that are the same distance from one center point.

Term

Center

Definition

The point inside a circle equally distant from every point on the circle.

Term

Radius

Definition

A line segment from a circle's center to its rim, or the length of that segment.

Term

Circumference

Definition

The distance all the way around a circle. Its formula is C = 2πr.

Term

Arc

Definition

A curved piece of a circle's rim.

Term

Radian

Definition

An angle unit: one radian is the central angle whose arc length equals the circle's radius.

Term

Arc length (s)

Definition

The distance measured along an arc. For a positive central angle in radians, s = rθ.

Term

θ (theta)

Definition

The Greek letter theta, commonly used to name an angle or its measure.

Term

Degree measurement

Definition

Expressing the amount and direction of a turn using degrees.

Term

Radian measurement

Definition

Expressing the amount and direction of a turn using radians. It measures the same turn with a different unit from degrees.

Term

Numerator

Definition

The top number or expression in a fraction. It counts pieces of the size named by the denominator.

Term

Denominator

Definition

The bottom number or expression in a fraction. It tells the size of each counted piece. It cannot be zero.

Term

Reciprocal

Definition

The number that multiplies a given nonzero number to make 1. For a nonzero fraction, exchange its top and bottom.

Sector area: how much of the disk you keep

In plain words

Imagine cutting a slice from a round pizza.

Rule

A = 12r2θ, with θ in radians; for degrees use A = θ360°πr2.
For one physical slice, r > 0 and 0 ≤ θ ≤ 2π in radians; sector area is a nonnegative size, also called its magnitude.

Step

  1. Identify the sector, the filled slice between two radii and their arc, because area measures the inside rather than the rim.

  2. Use the physical slice's nonnegative opening. Convert a degree measurement to radians before using A = 12r2θ. A 300° sector is the large slice; replacing it by 60° changes the chosen region. Magnitude means the nonnegative size of the stated opening.

  3. Square the radius first: r2 means r × r. Multiply that result by the radian angle and by 12.

  4. Keep π exact when possible, then round only the final requested decimal. Label the result in square units.

  5. Check with the slice's fraction of 360° times πr2. A slice no larger than the full disk cannot have more than the disk's area.

Question

You are finding the amount of filled surface in the specified circular slice. Find the exact area of a sector with radius 7 cm and central angle 90°.

Answer

A = 49π4 cm2, exactly.

Trap

Using r instead of r2, or reporting area in centimeters. Write the radius multiplication explicitly, such as 72 = 7 × 7 = 49, and give square units. The angle must also be in radians for A = 12r2θ.

Strategy

  1. Identify the filled sector and its nonnegative opening.

  2. If the opening is in degrees, convert it to radians for A = 12r2θ.

  3. If only an arc length is given, divide s by r to find the radian opening first.

  4. Square the radius by multiplying it by itself; this supplies the area scale.

  5. Multiply 12r2θ, keep exact factors such as π, and round only when requested.

  6. Label square units and check using the opening's fraction of a whole disk.

Term

Angle

Definition

Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

Term

Central angle

Definition

An angle whose vertex is at a circle's center.

Term

Circle

Definition

All the points in a flat surface that are the same distance from one center point.

Term

Center

Definition

The point inside a circle equally distant from every point on the circle.

Term

Radius

Definition

A line segment from a circle's center to its rim, or the length of that segment.

Term

Circumference

Definition

The distance all the way around a circle. Its formula is C = 2πr.

Term

Arc

Definition

A curved piece of a circle's rim.

Term

Radian

Definition

An angle unit: one radian is the central angle whose arc length equals the circle's radius.

Term

Radian measure

Definition

An angle's size expressed in radians. For a positive central angle, divide arc length by radius: θ = sr.

Term

Arc length (s)

Definition

The distance measured along an arc. For a positive central angle in radians, s = rθ.

Term

Sector

Definition

The region inside a circle enclosed by two radii and the arc between them.

Term

Sector area (A)

Definition

The amount of space inside a sector. For a positive central angle in radians, A = 12r2θ.

Term

θ (theta)

Definition

The Greek letter theta, commonly used to name an angle or its measure.

Term

Degree measurement

Definition

Expressing the amount and direction of a turn using degrees.

Term

Radian measurement

Definition

Expressing the amount and direction of a turn using radians. It measures the same turn with a different unit from degrees.

Term

Numerator

Definition

The top number or expression in a fraction. It counts pieces of the size named by the denominator.

Term

Denominator

Definition

The bottom number or expression in a fraction. It tells the size of each counted piece. It cannot be zero.

Trigonometric functions

Properties of the trigonometric functions

Graphs of sine and cosine

Graphs of the other four functions

Sinusoidal functions

Inverse trigonometric functions

Trigonometric equations

Trigonometric identities

Sum and difference formulas

Double-angle and half-angle formulas