Quarry School

Sector area: how much of the disk you keep

Subject: MathematicsLeans on: Squared quantitiesLeans on: Fraction multiplicationLeans on: Arc lengthLeans on: Semicircular
Level 1 · FoundationsAbout 13 min read9 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Imagine cutting a slice from a round pizza.

    Rule

    A = 12r2θ, with θ in radians; for degrees use A = θ360°πr2.
    For one physical slice, r > 0 and 0 ≤ θ ≤ 2π in radians; sector area is a nonnegative size, also called its magnitude.

    Step

    1. Identify the sector, the filled slice between two radii and their arc, because area measures the inside rather than the rim.

    2. Use the physical slice's nonnegative opening. Convert a degree measurement to radians before using A = 12r2θ. A 300° sector is the large slice; replacing it by 60° changes the chosen region. Magnitude means the nonnegative size of the stated opening.

    3. Square the radius first: r2 means r × r. Multiply that result by the radian angle and by 12.

    4. Keep π exact when possible, then round only the final requested decimal. Label the result in square units.

    5. Check with the slice's fraction of 360° times πr2. A slice no larger than the full disk cannot have more than the disk's area.

    Question

    You are finding the amount of filled surface in the specified circular slice. Find the exact area of a sector with radius 7 cm and central angle 90°.

    Answer

    A = 49π4 cm2, exactly.

    Trap

    Using r instead of r2, or reporting area in centimeters. Write the radius multiplication explicitly, such as 72 = 7 × 7 = 49, and give square units. The angle must also be in radians for A = 12r2θ.

    Strategy

    1. Identify the filled sector and its nonnegative opening.

    2. If the opening is in degrees, convert it to radians for A = 12r2θ.

    3. If only an arc length is given, divide s by r to find the radian opening first.

    4. Square the radius by multiplying it by itself; this supplies the area scale.

    5. Multiply 12r2θ, keep exact factors such as π, and round only when requested.

    6. Label square units and check using the opening's fraction of a whole disk.

    Term

    Angle

    Definition

    Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.

    Term

    Central angle

    Definition

    An angle whose vertex is at a circle's center.

    Term

    Circle

    Definition

    All the points in a flat surface that are the same distance from one center point.

    Term

    Center

    Definition

    The point inside a circle equally distant from every point on the circle.

    Term

    Radius

    Definition

    A line segment from a circle's center to its rim, or the length of that segment.

    Term

    Circumference

    Definition

    The distance all the way around a circle. Its formula is C = 2πr.

    Term

    Arc

    Definition

    A curved piece of a circle's rim.

    Term

    Radian

    Definition

    An angle unit: one radian is the central angle whose arc length equals the circle's radius.

    Term

    Radian measure

    Definition

    An angle's size expressed in radians. For a positive central angle, divide arc length by radius: θ = sr.

    Term

    Arc length (s)

    Definition

    The distance measured along an arc. For a positive central angle in radians, s = rθ.

    Term

    Sector

    Definition

    The region inside a circle enclosed by two radii and the arc between them.

    Term

    Sector area (A)

    Definition

    The amount of space inside a sector. For a positive central angle in radians, A = 12r2θ.

    Term

    θ (theta)

    Definition

    The Greek letter theta, commonly used to name an angle or its measure.

    Term

    Degree measurement

    Definition

    Expressing the amount and direction of a turn using degrees.

    Term

    Radian measurement

    Definition

    Expressing the amount and direction of a turn using radians. It measures the same turn with a different unit from degrees.

    Term

    Numerator

    Definition

    The top number or expression in a fraction. It counts pieces of the size named by the denominator.

    Term

    Denominator

    Definition

    The bottom number or expression in a fraction. It tells the size of each counted piece. It cannot be zero.

    1 In plain words

    Imagine cutting a slice from a round pizza. The curved crust is an arc, while the whole piece of pizza between the two cuts is a sector. The whole filled circle is called a disk. Arc length measures how much crust you have; sector area (A) measures how much surface you have. A quarter-turn slice keeps one quarter of the crust and one quarter of the pizza. Radians express that same fraction using a full turn of 2π. Use the nonnegative opening of the physical slice, because area cannot be negative. Keep track of the units: crust uses centimeters, while pizza surface uses square centimeters.

    Explain it like I am five

    Picture a pizza. The whole round pie is a disk, and a slice cut from the center is a sector. Sector area, A, measures how much surface the slice covers, in square units such as cm2 (square centimeters).

    Example: the pizza's radius is r = 6 cm and the slice's angle at the center is 150°. The formula A = 12r2θ needs θ (theta) in radians, so convert first: 150° × π180° = 5π6. Square the radius, multiplying it by itself: r2 = 6 × 6 = 36. Then A = 12 × 36 × 5π6 = 18 × 5π6 = 15π cm2, about 47.12 cm2.

    Why the formula is true: the slice is θ2π of a full turn, so it holds that same fraction of the whole pie, whose area is πr2. θ2π × πr2 = 12r2θ, because the π on top cancels the π on the bottom and a 2 stays below. Check: 150° is 150360 = 512 of the pie, and the pie is π × 36 = 36π cm2. 512 × 36π = 15π cm2.

    2 Picture it

    90° = π/27 cm7π/2 cm
    The arc is the curved boundary; the sector is the filled quarter of the disk.

    Reminder

    Reminder: Squared quantities, Fraction multiplication, Arc length, Semicircular
    • Squared quantities. 72 = 7 × 7 = 49, and (7 cm)2 = 49 cm2.
    • Fraction multiplication. 12 × 49 × 2π5 = 98π10 = 49π5, because the numerator and denominator factors multiply before reduction.
    • Arc length. s = rθ uses radians. Substituting that into A = 12r2θ gives A = 12r × s.
    • Semicircular. Semicircular means half a circle. Its central opening is 180° = π radians.

    3 Why

    A full disk has area πr2, and a full turn has radian measure 2π. A sector of θ radians occupies θ2π of the disk, so A = θ2π × πr2 = 12r2θ. Canceling π leaves the factor one half. The square matters: doubling a radius doubles both length directions across the slice, multiplying area by 4. Degrees also describe the correct slice, but their fraction is θ360°, so the radian formula requires conversion first.

    4 The rule

    A=12r2θ, with θ in radians; for degrees use A=θ360°πr2.

    For one physical slice, r > 0 and 0≤θ≤2π in radians; sector area is a nonnegative size, also called its magnitude.

    The same idea, five ways

    Say it

    Say sector area is one half times radius squared times the central angle in radians.

    Write it

    A sector is the filled circular slice bounded by two radii and their arc; its area is the same fraction of the disk as its opening is of one complete turn.

    In math
    • A = 12r2θ, with θ in radians
    • A = θ360°πr2, with θ in degrees
    • A = θ2ππr2, with θ in radians
    • A = 12rs, using s = rθ
    • for a physical sector: r > 0 and 0 ≤ θ ≤ 2π in radians
    Like

    Arc length measures the pizza crust along the edge; sector area measures the pizza surface between the cuts.

    See it
    72° = 2π/57 cm14π/5 cm
    The curved arc is a length, while the shaded sector covers 49π5 square centimeters.

    The same idea, other ways

    As a fraction of a pizza

    The sector is the whole pizza slice between two cuts, not its curved crust. If the slice takes one fifth of the full turn, it takes one fifth of the whole disk's area. Multiply that fraction by πr2 to find the covered surface.

    72° = one fifth of a turnr
    One fifth of the angle keeps one fifth of the filled disk.
    Why the radius is squared

    Widen a slice to twice its radius. It doubles in both length directions, like doubling a rectangle's width and height. The area becomes four times as large. That is why the area formula uses r × r, while the curved crust formula uses only one factor of r.

    r²r²rr²r²rrr
    Doubling both dimensions produces four copies of the original area.

    Part 1: Arc versus sector

    The crust and the pizza surface belong to the same slice, but they measure different things. Arc length is a distance along a curve. Sector area is the amount of filled surface between the two radii. The same opening supplies the same fraction of the whole circumference and the whole disk.

    • Arc length (s): s = rθ, measured in length units.
    • Sector area (A): A = 12r2θ, measured in square units.
    • Both formulas require radians and the physical opening's nonnegative size.
    • Combining the formulas gives A = 12rs because s = rθ.
    • Scope: linear and angular speed are omitted from this section.
    • From the half-turn anchor, rebuild conversion factors πradians180° and 180°πradians, then check that a quarter turn is 90° = π2.
    π/35 cm5π/3 cm
    The same 60° slice has an arc length in centimeters and an area in square centimeters.

    Reminder

    Reminder: Squaring a radius
    • Squaring a radius. For r = 5 cm, r2 = 5 × 5 = 25 cm2; doubling gives 10 cm and does not square the radius.

    Worked example

    Measure both the crust and the surface

    You are finding both the curved boundary length and the filled slice area. For radius 5 cm and angle π3 radians, find the arc length and sector area exactly.

    Show the steps and the answer
    π/3 radians5 cm5π/3 cm
    A central angle of 60° with its radius 5 cm, its arc 5π/3 cm and its sector shaded.
    1. s=5×π3=5π3 cm.Arc length multiplies the radius by the already-radian angle.
    2. r2=5×5=25cm2.Sector area uses a square of the radius.
    3. A=12×25×π3=25π6cm2.Multiply the top factors and the bottom factors: 2 × 3 = 6.
    Answer
    • Arc length: 5π3 cm.
    • Sector area: 25π6 cm2.
    Double-check π3 = 60°, which is one sixth of a full turn. The circumference is 10π cm, and 10π6 = 5π3 cm. The disk area is 25π cm2, and one sixth is 25π6 cm2.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: A sector area can be reported in centimeters because its boundary is an arc.
    Area measures filled surface in two directions. Arc length measures only distance along the curve.
    ✓ Instead: Report arc length in centimeters and sector area in square centimeters.

    Tips and tricks

    • Picture crust for arc length and pizza surface for sector area. Check the units beside each answer.

    Part 2: Area from a fraction of the circle

    If a slice uses one eighth of the turn, it keeps one eighth of the disk. You can find that fraction using degrees or radians. The degree fraction is the opening divided by 360°; the radian fraction is the opening divided by 2π. Both fractions describe the same piece of pizza.

    • Full disk area is πr2.
    • For degrees, A = θ360°πr2.
    • For radians, A = θ2ππr2 = 12r2θ.
    • Do not use 360 as the full-turn divisor for a radian measurement, or 2π as the divisor for a degree measurement.
    45° = π/44 units
    A 45° slice is one eighth of the disk, so its area is one eighth of 16π.

    Reminder

    Reminder: Fraction of a disk
    • Fraction of a disk. 45° is 45360 = 18 of a turn. With radius 4, one eighth of the 16π disk area is 2π square units.

    Worked example

    A 45° slice with radius 4

    You are finding the amount of filled surface in the specified circular slice. Find the area of a sector with radius 4 units and central angle 45°, exactly and to two decimal places.

    Show the steps and the answer
    π/4 radians4 unitsπ units
    A central angle of 45° with its radius 4 units, its arc π units and its sector shaded.
    1. 45°×πradians180°=π4 radians.45 is one quarter of 180, and the radian formula requires this conversion.
    2. r2=4×4=16 square units.Squaring the radius means multiplying it by itself.
    3. A=12×16×π4=16π8=2π square units.The bottom factors multiply to 8, and 16 ÷ 8 = 2.
    4. A≈6.28 square units.2π ≈ 6.2831853, which rounds to 6.28 at two decimal places.
    Answer
    • Exact area: 2π square units.
    • Rounded area: approximately 6.28 square units.
    Double-check 45° is 45360 = 18 of a disk. Its full area is 16π square units, and 18 × 16π = 2π square units.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: A radian angle's fraction of a turn is θ360.
    360 counts a full turn in degrees. A full turn in radians is 2π, so the numerator and denominator must use matching angle units.
    ✓ Instead: Use θ2π for radians, or θ360° for a degree measurement.

    Tips and tricks

    • Find the slice's fraction of a full turn, then multiply by the whole disk area πr2.

    5 How

    1. Identify the sector, the filled slice between two radii and their arc, because area measures the inside rather than the rim.
    2. Use the physical slice's nonnegative opening. Convert a degree measurement to radians before using A = 12r2θ. A 300° sector is the large slice; replacing it by 60° changes the chosen region. Magnitude means the nonnegative size of the stated opening.
    3. Square the radius first: r2 means r × r. Multiply that result by the radian angle and by 12.
    4. Keep π exact when possible, then round only the final requested decimal. Label the result in square units.
    5. Check with the slice's fraction of 360° times πr2. A slice no larger than the full disk cannot have more than the disk's area.

    Find the filled slice's area

    1
    Is the opening in degrees?
    YesConvert to radians, or use its fraction of 360° times πr2.
    NoUse a known radian opening directly.
    ↓
    2
    Is the opening missing but the arc length known?
    YesCompute θ = sr to find the opening, or use the equivalent A = 12rs.
    NoSquare the radius and apply the chosen sector-area formula.
    ↓
    3
    Does the question request a decimal answer?
    YesKeep extra digits until the final rounding and state its precision.
    NoKeep the exact fraction or π expression with square units.
    1. Identify the filled sector and its nonnegative opening.
    2. If the opening is in degrees, convert it to radians for A = 12r2θ.
    3. If only an arc length is given, divide s by r to find the radian opening first.
    4. Square the radius by multiplying it by itself; this supplies the area scale.
    5. Multiply 12r2θ, keep exact factors such as π, and round only when requested.
    6. Label square units and check using the opening's fraction of a whole disk.

    6 Worked example

    Worked example

    A quarter-disk sector

    You are finding the amount of filled surface in the specified circular slice. Find the exact area of a sector with radius 7 cm and central angle 90°.

    Show the steps and the answer
    π/2 radians7 cm7π/2 cm
    A central angle of 90° with its radius 7 cm, its arc 7π/2 cm and its sector shaded.
    1. 90°×πradians180°=π2 radians.The sector formula uses radians, and 90 is half of 180.
    2. r2=7×7=49cm2.Area uses the square of the radius, so the length unit is squared too.
    3. A=12×49×π2=49π4cm2.Multiply the numerators 1 × 49 × π and denominators 2 × 2.
    Answer
    A = 49π4 cm2, exactly.
    Double-check The angle is 90360 = 14 of the disk. Its full area is π × 72 = 49π cm2; one quarter is 49π4 cm2.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 4

    Half a disk

    You are finding the filled area of one half of the circle. Find the exact area of a semicircular sector, meaning a half-circle slice, with radius 3 cm and angle π radians.

    Show the steps and the answer
    π radians3 cm3π cm
    A central angle of 180° with its radius 3 cm, its arc 3π cm and its sector shaded.
    1. r2=3×3=9cm2.The radius must be squared for an area calculation.
    2. A=12×9×π=9π2cm2.The angle is already in radians, so use the sector formula directly.
    Answer
    A = 9π2 cm2.
    Double-check π radians = 180°, half a full turn. The full disk has area 9π cm2, so half has area 9π2 cm2.

    Rung 2 of 4

    One radian of surface

    You are finding the amount of filled surface in the specified circular slice. Find the sector area for r = 5 cm and θ = 1 radian.

    Show the steps and the answer
    1 radian5 cm5 cm
    A central angle of 57.2958° with its radius 5 cm, its arc 5 cm and its sector shaded.
    1. r2=5×5=25cm2.Squaring the radius provides the area scale.
    2. A=12×25×1=252=12.5cm2.The angle is in radians; taking half of 25 gives 12.5 exactly.
    Answer
    A = 12.5 cm2, exactly.
    Double-check One radian uses 12π of a full turn. That fraction of the 25π cm2 disk is 12π × 25π = 252 cm2.

    Rung 3 of 4

    Convert a degree opening

    You are finding the amount of filled surface in the specified circular slice. Find the sector area for r = 6 cm and θ = 110°, exactly and to two decimal places.

    Show the steps and the answer
    11π/18 radians6 cm11π/3 cm
    A central angle of 110° with its radius 6 cm, its arc 11π/3 cm and its sector shaded.
    1. 110°×πradians180°=110π180=11π18 radians.The radian formula requires conversion; divide 110 and 180 by 10.
    2. r2=6×6=36cm2.Area uses the squared radius.
    3. A=12×36×11π18=396π36=11πcm2.Multiply the numerator and denominator factors, then use 396 ÷ 36 = 11.
    4. A≈34.56cm2.11π ≈ 34.5575192, which rounds to 34.56 at two decimal places.
    Answer
    • Exact area: 11π cm2.
    • Rounded area: approximately 34.56 cm2.
    Double-check 110° uses 110360 = 1136 of the disk. The full disk area is 36π cm2; 1136 × 36π = 11π cm2.

    Rung 4 of 4

    An arc determines its sector

    You are finding the turn from its arc and radius, then the filled slice area. An arc of 10 cm lies on a circle of radius 5 cm. Find its central angle and the area of its sector.

    Show the steps and the answer
    2 radians5 cm10 cm
    A central angle of 114.592° with its radius 5 cm, its arc 10 cm and its sector shaded.
    1. θ=10cm5cm=2 radians.The arc contains two radius-lengths, so divide s by r to find the radian opening.
    2. r2=5×5=25cm2.The sector formula uses the squared radius.
    3. A=12×25×2=25cm2.The recovered angle is in radians, and the factors 12 and 2 multiply to 1.
    Answer
    • Central angle: 2 radians.
    • Sector area: 25 cm2.
    Double-check The circumference is 10π cm, so the 10 cm arc uses 1010π = 1π of the rim. The same fraction of the 25π cm2 disk is 1π × 25π = 25 cm2. Also A = 12rs gives 12 × 5 × 10 = 25 cm2.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: With r = 7 cm, use 2r = 14 in place of r2 in the sector formula.
    Squaring multiplies a number by itself. Doubling adds two copies. Area scales in two length directions, so the formula needs the square.
    ✓ Instead: r2 = 7 × 7 = 49 cm2.
    ✗ Not this: A sector area can be reported in centimeters.
    Centimeters measure length along a path. Area counts covered squares.
    ✓ Instead: Write square centimeters, cm2, for an area answer.
    ✗ Not this: Use 12r2θ with θ written as 72 degrees.
    The one-half formula comes from the full-turn radian measure 2π. Substituting a degree count changes its meaning.
    ✓ Instead: Convert 72° to 2π5 radians first, or use the degree fraction 72°360° times πr2.

    Tips and tricks

    • Draw and shade the filled slice so you distinguish its surface from the curved edge.
    • Write r2 = r × r before multiplying other factors.
    • Check the result as a fraction of the full disk area πr2. For one sector, the result must fit inside that full area.

    7 The trap

    Using r instead of r2, or reporting area in centimeters. Write the radius multiplication explicitly, such as 72 = 7 × 7 = 49, and give square units. The angle must also be in radians for A = 12r2θ.

    Keep in mind

    • Square the radius first: with r = 6, r2 = 6 × 6 = 36, not 6 × 2 = 12.
    • Area comes in square units: 15π cm2, not 15π cm.
    • The formula needs radians; with degrees use A = θ360°πr2, as in 150°360° × 36π = 15π.
    • Doubling the radius multiplies the area by 4, not 2, because r is squared: r = 12 gives r2 = 144, which is 4 × 36.

    Memory hook

    Crust versus cheese: crust is s = rθ, cheese is A = 12r2θ. Cheese covers area, so the radius gets squared.

    Flash cards

    Say the answer out loud, then flip.

    What is a sector?
    The slice of a disk between two radii and their arc, like a slice of pizza.
    What is a disk?
    The whole filled circle: the full pizza, not only its crust.
    State the sector area formula and its unit rule.
    A = 12r2θ, with θ in radians
    r = 4 m and θ = 3 radians. Find A.
    24 m2, from 12 × 16 × 3
    r = 12 cm and θ = 35°. Find A exactly.
    35° = 7π36, so A = 12 × 144 × 7π36 = 14π cm2, about 43.98 cm2
    A student writes A = 12 × 6 × 5π6 for r = 6. What went wrong?
    The radius was not squared: use r2 = 36, which gives 15π.

    Comes back in