Arc length: how far you travel around the rim
Quick review (2 minutes)
Imagine walking along the curved edge of a circular garden.
s = rθ; θ = ; r = when θ > 0. θ must be in radians.
For one physical slice, r > 0 and 0 ≤ θ ≤ 2π; arc length is a nonnegative size, also called its magnitude.
Identify the chosen arc, its radius and its central angle. Use the physical opening's nonnegative size, because the length measures distance rather than clockwise or counterclockwise direction. Magnitude means size with the direction sign removed: −75° has magnitude 75°. A chosen 300° arc remains 300°; using 60° would select a different arc.
If the angle is in degrees, convert it to radians first by multiplying by .
Choose the form that isolates the missing quantity: multiply rθ for length, divide s by r for angle, or divide s by θ for radius.
Use matching length units for s and r. Keep exact π expressions through the calculation and round only the final decimal answer.
Check independently using the angle's fraction of a full turn times the circumference. For a slice no larger than the whole circle, its arc cannot exceed 2πr.
You are finding distance along the specified curved rim and expressing that length exactly and as a rounded decimal. A circle has radius 8 cm. Find the arc cut off by a 75° central angle, exactly and to two decimal places.
Exact arc length: cm.
Rounded arc length: approximately 10.47 cm.
Putting 75 directly into s = rθ when the opening is 75°. The formula counts radius-lengths, so θ must be radians. Write the conversion before substituting, and keep the answer in a length unit rather than degrees.
Identify the chosen arc, central opening, and radius from the question.
Use the nonnegative size of that chosen opening and convert degrees to radians if necessary.
Find which quantity is missing: arc length, central angle, or radius.
Use s = rθ, θ = , or r = to leave that unknown alone.
Check matching length units and label the requested answer.
Verify with the fraction of a full turn times the circumference or by substituting the recovered quantity back.
Angle
Two rays sharing an endpoint. You can also view an angle as the turn that moves one ray toward the other.
Clockwise
Turning in the direction a clock's hands normally move.
Counterclockwise
Turning in the direction opposite to a clock's usual hand movement.
Central angle
An angle whose vertex is at a circle's center.
Circle
All the points in a flat surface that are the same distance from one center point.
Center
The point inside a circle equally distant from every point on the circle.
Radius
A line segment from a circle's center to its rim, or the length of that segment.
Circumference
The distance all the way around a circle. Its formula is C = 2πr.
Arc
A curved piece of a circle's rim.
Radian
An angle unit: one radian is the central angle whose arc length equals the circle's radius.
Arc length (s)
The distance measured along an arc. For a positive central angle in radians, s = rθ.
θ (theta)
The Greek letter theta, commonly used to name an angle or its measure.
Degree measurement
Expressing the amount and direction of a turn using degrees.
Radian measurement
Expressing the amount and direction of a turn using radians. It measures the same turn with a different unit from degrees.
Numerator
The top number or expression in a fraction. It counts pieces of the size named by the denominator.
Denominator
The bottom number or expression in a fraction. It tells the size of each counted piece. It cannot be zero.
Reciprocal
The number that multiplies a given nonzero number to make 1. For a nonzero fraction, exchange its top and bottom.
1 In plain words
Imagine walking along the curved edge of a circular garden. The distance you walk is the arc length (s), while the straight distance from the center to the edge is the radius. Radians tell you how many radius-lengths your walk uses. If the turn uses three radius-lengths and each radius is 4 meters, you walk 12 meters. This also works backward: divide the walk's length by the radius to find the angle, or divide by the radian count to find the radius. For a physical slice, use the nonnegative size of its opening, because a distance along the rim cannot be negative.
Explain it like I am five
Picture walking along the curved edge of a round garden. The distance you walk is the arc length, called s. Radians count how many radius-lengths the walk uses, so the distance is the radius times that count: s = rθ, where r is the radius and θ (theta) is the angle in radians.
Example: the garden's radius is r = 5 m (meters) and the central angle, the angle at the center, is 144° (144 degrees). The formula needs radians, so convert first: 144° × = = , dividing top and bottom by 36. Then s = rθ = 5 × = 4π m, about 12.57 m.
Why it works: radians means the walk uses , about 2.51, radius-lengths, and each one is 5 m long. Check it another way: 144° is = of a full turn, and the whole edge is 2π × 5 = 10π m. × 10π = 4π m, the same answer.
2 Picture it
Reminder
Reminder: Undoing multiplication, Dividing by a fraction, Magnitude
- Undoing multiplication. To solve 14 = 2r, divide both sides by 2 to leave the unknown radius alone: r = 7. Check 2 × 7 = 14.
- Dividing by a fraction. 10π ÷ = 10π × = 25. Multiplying by the reciprocal undoes the fraction divisor.
- Magnitude. Magnitude means size without the turning sign. A chosen clockwise 72° arc uses a positive 72° size; do not replace it with a different arc.
3 Why
A central angle of θ radians uses of one full turn. Its arc therefore uses that same fraction of the circumference: s = × 2πr = rθ. The 2π factors cancel. This explains both the formula and its unit requirement: radians compare the angle with a 2π-radian full turn. Degrees compare with 360° instead. Dividing s = rθ by r or by θ gives the two reverse formulas without changing the relationship.
4 The rule
; ; when .
must be in radians.
For one physical slice, r > 0 and ; arc length is a nonnegative size, also called its magnitude.
The same idea, five ways
Say arc length is radius times the central angle in radians.
Arc length measures the curved distance along the chosen rim; the radian opening counts how many radius-lengths it contains.
- s = rθ
- θ = , with r > 0
- r = , with θ > 0
- for a single arc: 0 ≤ θ ≤ 2π, using its nonnegative opening
- θ in radians; s and r in matching length units
The radius is one ribbon piece, the radian angle is the piece count, and the arc is the combined ribbon length.
The same idea, other ways
An angle of 2 radians tells you to lay two radius-lengths along the curved rim. If a radius-length is 7 cm, the arc uses 2 × 7 = 14 cm. Multiplication combines the number of sticks with the length of each stick.
A quarter turn keeps a quarter of a full circumference; a fifth turn keeps a fifth. The angle's fraction of a full turn is the arc's fraction of the full rim. In radians, multiplying by 2πr leaves rθ after canceling 2π.
Part 1: Find arc length
The radian count says how many measuring sticks to lay along the rim, and the radius says how long each stick is. Multiplying the count by the stick's length gives the curved distance. A longer radius makes a longer arc for the same opening.
- s = rθ with θ in radians.
- Length answers use units such as centimeters or meters, not square units.
- For a clockwise description of a physical slice, use the magnitude of its stated opening, not a negative distance.
Reminder
Reminder: Degree conversion and reduction
- Degree conversion and reduction. 75° × = = , dividing top and bottom by 15.
Worked example
A radian angle is ready to use
You are finding distance along the curved rim using the radius and a given radian opening. Find the arc length for radius 9 cm and central angle radians.
Show the steps and the answer
- cm.The angle is already in radians, so substitute directly into s = rθ.
- cm.The factor 9 divided by 3 equals 3.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write radians beside θ before multiplying. Give the result in a length unit.
Part 2: Find the central angle
You know how far the arc goes and how large the circle is. Divide the arc by the radius to count how many radius-lengths it contains. This produces radians even when the lengths are in centimeters. Convert afterward if the question also wants a degree measurement.
- θ = is the radian definition and the reverse of s = rθ.
- The length units cancel when s and r use the same unit.
- Convert the resulting radian measurement to degrees with .
Reminder
Reminder: Radian-to-degree conversion
- Radian-to-degree conversion. 2.5 radians × = ≈ 143.24°, rounded to two decimal places.
Worked example
Recover the angle from an arc and radius
You are finding a turn from its curved distance, then expressing that turn in both units. An arc of 15 cm lies on a circle of radius 6 cm. Find the central angle in radians and in degrees to two decimal places.
Show the steps and the answer
- radians.Divide arc by radius; the centimeters cancel, and dividing 15 and 6 by 3 gives .
- radians .The degree conversion cancels radians and multiplies 2.5 by 180.
- .450 ÷ π ≈ 143.2394488, which rounds to 143.24 at two decimal places.
- Exact angle: 2.5 radians.
- Degree angle: approximately 143.24°.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use the same length unit for the arc and radius, then write radians after their ratio.
Part 3: Find the radius
If you know the arc length and the number of radius-lengths in it, divide the total distance by the count. It is like dividing a roll of ribbon among a known number of equal pieces. The result is the length of one piece, which here is the radius.
- From s = rθ, divide both sides by θ to get r = .
- θ must be positive when recovering a radius from a physical arc.
- A zero opening has zero arc length for every radius, so it cannot determine the radius.
Reminder
Reminder: Dividing by a fraction
- Dividing by a fraction. Dividing by multiplies by its reciprocal , whose product with is 1.
Worked example
Divide by a fraction of π
You are finding the straight distance from the center to the rim by undoing the given radian count. An arc of 9π cm subtends a central angle of radians. Find the circle's radius.
Show the steps and the answer
- .Substitute the arc and radian angle into s = rθ.
- .Divide both sides by the nonzero angle; dividing by a fraction means multiplying by its reciprocal.
- cm.π cancels and 9 × 3 = 27; the remaining unit is a length.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Divide by the positive radian angle, then substitute your radius back into s = rθ.
5 How
- Identify the chosen arc, its radius and its central angle. Use the physical opening's nonnegative size, because the length measures distance rather than clockwise or counterclockwise direction. Magnitude means size with the direction sign removed: −75° has magnitude 75°. A chosen 300° arc remains 300°; using 60° would select a different arc.
- If the angle is in degrees, convert it to radians first by multiplying by .
- Choose the form that isolates the missing quantity: multiply rθ for length, divide s by r for angle, or divide s by θ for radius.
- Use matching length units for s and r. Keep exact π expressions through the calculation and round only the final decimal answer.
- Check independently using the angle's fraction of a full turn times the circumference. For a slice no larger than the whole circle, its arc cannot exceed 2πr.
Select the missing arc quantity
- Identify the chosen arc, central opening, and radius from the question.
- Use the nonnegative size of that chosen opening and convert degrees to radians if necessary.
- Find which quantity is missing: arc length, central angle, or radius.
- Use s = rθ, θ = , or r = to leave that unknown alone.
- Check matching length units and label the requested answer.
- Verify with the fraction of a full turn times the circumference or by substituting the recovered quantity back.
6 Worked example
Worked example
Convert a degree opening before finding the arc
You are finding distance along the specified curved rim and expressing that length exactly and as a rounded decimal. A circle has radius 8 cm. Find the arc cut off by a 75° central angle, exactly and to two decimal places.
Show the steps and the answer
- radians.s = rθ requires radians; dividing 75 and 180 by 15 reduces the fraction.
- cm.The radian count tells how many 8 cm radius-lengths fit along the arc.
- cm.Divide numerator and denominator by 4 to keep the exact result reduced.
- cm. ≈ 10.4719755, which rounds to 10.47 at two decimal places.
- Exact arc length: cm.
- Rounded arc length: approximately 10.47 cm.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
One radius-length
You are finding distance along the curved rim, rather than straight across the circle. Find the arc length when r = 5 cm and θ = 1 radian.
Show the steps and the answer
- cm.One radian uses one radius-length of arc, and the radius is 5 cm.
Rung 2 of 4
Decimal radians
You are finding distance along the curved rim, rather than straight across the circle. A circle has radius 10 units. How long is its arc for θ = 1.2 radians?
Show the steps and the answer
- .The angle is already in radians, so s = rθ applies directly.
- units.Ten copies of 1.2 total 12, and arc length uses the radius's length unit.
Rung 3 of 4
Degrees need a conversion
You are finding distance along the curved rim, rather than straight across the circle. Find the arc length for r = 8 cm and θ = 75°, exactly and to two decimal places.
Show the steps and the answer
- radians.The arc formula needs radians; reduce by dividing 75 and 180 by 15.
- cm.Multiply radius by radian angle, then divide the numerator and denominator by 4.
- cm.The exact answer is about 10.4719755 cm, which rounds to two decimal places.
- Exact: cm.
- Rounded: approximately 10.47 cm.
Rung 4 of 4
Recover the radius
You are finding the straight distance from center to rim using the known curved length and radian opening. An arc has length 7.2 cm and central angle 0.8 radians. Find its radius.
Show the steps and the answer
- .Substitute the known arc length and radian angle into s = rθ.
- .Divide both sides by 0.8 to undo multiplication and leave r alone.
- cm.Multiplying top and bottom by 10 removes both decimals without changing the ratio, and 72 ÷ 8 = 9.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write radians beside θ before substituting into the arc formula.
- Use length units for arc length, such as cm. Use square units only for area.
- For one arc no longer than a complete circle, compare your answer with circumference 2πr.
7 The trap
Putting 75 directly into s = rθ when the opening is 75°. The formula counts radius-lengths, so θ must be radians. Write the conversion before substituting, and keep the answer in a length unit rather than degrees.
Keep in mind
- θ must be in radians: putting 144 straight into s = rθ gives 5 × 144 = 720 m, far more than the whole 10π ≈ 31.4 m edge.
- Run the formula backward when needed: θ = , so a 15 m walk on a 6 m radius is = 2.5 radians.
- Keep π exact until the last step: 4π ≈ 12.57, but rounding π first gives 3.14 × 4 = 12.56.
- A distance is never negative, so use the size of the opening: a −65° slice uses 65°.
Memory hook
Say it as "s equals r theta": lay the radius along the rim θ times. Radians only, so convert degrees first.
Flash cards
Say the answer out loud, then flip.