Graphs of the other four functions — quick review
Four formulas and the inputs they must skip
Think of four number machines that all begin with the same angle.
Rule: tan x = ; cot x = ; sec x = ; csc x = .
For tan and sec, require x ≠ + nπ; for cot and csc, require x ≠ nπ, with n any integer.
1. Write the formula as a fraction because the denominator identifies the restriction.
2. Set the denominator equal to 0 to find the inputs that would make the division impossible.
3. Read those angles from the unit circle and substitute them back into the denominator to verify it is 0.
4. Exclude those inputs. Keep a zero numerator when the denominator is nonzero.
In plain words, use one angle to decide which machines have a number to return. Find tan, cot, sec and csc at x = .
tan(): undefined.
cot(): 0.
sec(): undefined.
csc(): 1.
A zero on the top is not a break. Check the bottom first: = 0, while is undefined.
1. Identify the denominator in the quotient or reciprocal formula.
2. Set that denominator equal to 0 to locate failures.
3. Find the full integer family and check a member in the denominator.
4. Exclude that family while keeping valid zero outputs.
5. To list forbidden inputs inside an interval, put the angle family between the two given bounds. Divide all parts by positive π, then subtract from all parts if the family is + nπ. Keep every integer between the resulting bounds on n. This finds exactly the family members inside the requested interval, even if the interval is far from zero. For [−π, 3π] and the cosine-zero family, this gives − ≤ n ≤ , so n = −1, 0, 1, 2. Compare the coefficients of π to check neighbors: − = −1.5π < −π.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Unit circle
A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).
Quadrantal angle
An angle whose terminal side lies on an axis. It is an integer multiple of radians, equivalently an integer multiple of 90°.
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Reciprocal identities
Equalities linking sine with cosecant and cosine with secant. Cotangent and tangent are reciprocal partners wherever both sides are defined.
Quotient identities
The formulas tan x = sine divided by cosine and cot x = cosine divided by sine, with nonzero denominators.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
x-coordinate
The first coordinate of a point. On a function graph it gives the input's horizontal position.
Range: the output heights each graph can reach
Imagine the graph shining a light sideways onto a wall.
Rule: tan x and cot x have range (−∞, ∞). sec x and csc x have range (−∞, −1] ∪ [1, ∞), meaning y ≤ −1 or y ≥ 1.
1. Identify whether you have a quotient function or a reciprocal-of-sine-or-cosine function.
2. For tangent or cotangent, accept any real output because every height occurs.
3. For secant or cosecant, keep outputs at or below −1 and at or above 1.
4. Include −1 and 1; exclude only the open middle band −1 < y < 1.
In plain words, check four proposed heights against the range. Decide whether sec x can equal 1, −2, 0 or .
1: possible.
−2: possible.
0: impossible.
: impossible.
Excluding ±1 along with the middle band. The gap is open: −1 < y < 1. At the edges, reciprocal values are still ±1.
1. Read which function the output belongs to.
2. Apply the all-real quotient range or the two-band reciprocal range.
3. For a reciprocal candidate, optionally flip it back and check the required sine or cosine.
4. Include allowed endpoints and explain rejections.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Unit circle
A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).
Domain
The set of inputs for which a function has an output.
Range
The set of output values a function actually reaches.
Real number
A number on the ordinary number line, including integers, fractions and square roots of nonnegative numbers.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Unbounded
Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.
Infinity
A symbol describing unlimited continuation, not a real output or an included endpoint.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
y-axis
The vertical coordinate line, whose points have input coordinate x = 0.
Union
Joining two sets: a value in either set is allowed. The symbol is ∪.
Amplitude
A finite half-height between a bounded wave's highest and lowest outputs. None of these four whole graphs has a finite amplitude.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Magnitude
A number's distance from zero, ignoring its sign.
Ratio
One number compared with another by division, with a nonzero divisor.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
Radius
The distance from a circle's center to any point on its rim.
Even and odd: how the picture balances
Hold a paper graph up to a mirror along the vertical axis.
Rule: sec(−x) = sec x is even, with y-axis symmetry. tan(−x) = −tan x, cot(−x) = −cot x and csc(−x) = −csc x are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.
1. Check that the input is allowed before using symmetry.
2. If the function is secant, negate the input and keep the output height.
3. If it is tangent, cotangent or cosecant, negate both input and output.
4. On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.
In plain words, predict the heights at the mirror input without rebuilding the circle each time. Find sec(−) and tan(−) using the positive-angle values.
sec(−) = .
tan(−) = −1.
Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.
1. Find the function's even or odd rule.
2. Verify that the input and its opposite are allowed.
3. Keep the output for even symmetry; reverse it for odd symmetry.
4. Check the matching coordinates on the graph.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Undefined
No output exists at that input. Here the formula would divide by zero.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Even function
A function whose domain includes opposite inputs together and has f(−x) = f(x). Its graph has y-axis symmetry.
Odd function
A function whose domain includes opposite inputs together and has f(−x) = −f(x). Its graph has origin symmetry.
Symmetry
A picture matches itself after a specified reflection or rotation.
With respect to (w.r.t.)
In relation to a specified reference. For symmetry, it names the axis or point used.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
y-axis
The vertical coordinate line, whose points have input coordinate x = 0.
Origin
The crossing of the axes, with coordinates (0, 0).
Function notation
A name followed by an input in parentheses, recording the output of that rule at that input.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
Period: copy the right-sized piece
Think of a repeating wallpaper strip.
Rule: tan(x + π) = tan x and cot(x + π) = cot x. sec(x + 2π) = sec x and csc(x + 2π) = csc x. Their fundamental periods are π, π, 2π and 2π respectively.
1. Select π for tangent or cotangent and 2π for secant or cosecant.
2. Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
3. Copy its points and breaks left and right by integer multiples of the period.
4. For an exact value, add or subtract complete periods to reach a known allowed input.
In plain words, remove complete repeating pieces until each input is an angle you know. Find tan() and csc().
tan() = 1.
csc() = 1.
Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.
1. Read the function name and choose its fundamental period.
2. Find a familiar allowed input by adding or subtracting an integer number of periods.
3. Check the reduced input in the denominator.
4. Evaluate there or copy the entire graph piece, including its breaks.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Period
A positive horizontal input distance after which the whole pattern repeats.
Fundamental period
The smallest positive period of a function.
Periodic function
A function whose outputs and allowed-input pattern repeat after a fixed positive input distance.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Ratio
One number compared with another by division, with a nonzero divisor.
Ray
A line that starts at one point and extends without end in one direction.
Quadrant
One of the four regions between the coordinate axes, numbered counterclockwise from upper right.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
Tangent and the meaning of a vertical asymptote
Imagine walking along a ramp that climbs beside a tall fence.
Rule: tan x = , with x ≠ + nπ for every integer n. The vertical asymptotes are x = + nπ.
Each branch is continuous and increasing; the central branch is on (−, ) and the pattern repeats every π.
1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.
2. For the central branch, use x = − and x = . Check cos(−) = 0 and cos() = 0 before drawing the dashed vertical lines.
3. Plot (−, −1), (0, 0), and (, 1), using the exact unit-circle values in the worked example's three-column table.
4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.
5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.
Rule: a vertical asymptote x = c has unbounded nearby output behavior on at least one side. For these parent trigonometric functions, the denominator is zero at c and the input c is excluded.
Explain tangent at , at 1.56, and at 1.58 radians. This asks you to separate the excluded input from accepted inputs on either side of it.
tan() is undefined.
tan(1.56) ≈ 92.6205, on the left.
tan(1.58) ≈ −108.6492, on the right.
Rule: on − < x < , tangent is continuous and increasing, with key points (−, −1), (0, 0), and (, 1).
Rule: tan(x + π) = tan x whenever tangent is defined. Copy the central branch by integer multiples of π; the boundary lines become x = + nπ.
Find and check the zeros of cosine to locate excluded inputs.
Draw two consecutive boundary lines and mark the zero halfway between them.
Use quarter-π offsets from that zero to place heights −1 and 1.
Draw one continuous rising branch, then repeat it every π.
Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Unit circle
A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).
Radian
An angle unit based on arc length divided by radius. A half-turn is π radians, equal to 180°.
Integer
A whole count, including positive counts, negative counts and zero.
Multiple
A number obtained by multiplying a given number by an integer.
Domain
The set of inputs for which a function has an output.
Real number
A number on the ordinary number line, including integers, fractions and square roots of nonnegative numbers.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
x-intercept
A graph point on the horizontal axis, where the output is zero.
y-intercept
A graph point on the vertical axis, where the input is zero.
Vertical asymptote
A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.
Not continuous (discontinuous)
A graph with a break. These four full graphs have breaks at excluded angles, while each branch is continuous.
Continuous
Having no break within an allowed interval. Each branch here is continuous even though excluded inputs separate branches.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Unbounded
Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.
Infinity
A symbol describing unlimited continuation, not a real output or an included endpoint.
Period
A positive horizontal input distance after which the whole pattern repeats.
Symmetry
A picture matches itself after a specified reflection or rotation.
Origin
The crossing of the axes, with coordinates (0, 0).
Increasing
Within an interval, a larger input gives a larger output.
One-sided approach
Moving toward an input while keeping every nearby input entirely on its left or entirely on its right.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Magnitude
A number's distance from zero, ignoring its sign.
Ratio
One number compared with another by division, with a nonzero divisor.
Ray
A line that starts at one point and extends without end in one direction.
Quadrant
One of the four regions between the coordinate axes, numbered counterclockwise from upper right.
Cotangent: the branch that falls
Picture a road that descends between two closed gates.
Rule: cot x = , with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ and its period is π.
On (0, π), the continuous decreasing branch passes through (, 1), (, 0), and (, −1).
1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.
2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.
3. Read the three table columns to plot (, 1), (, 0), and (, −1).
4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.
5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.
Locate and check the sine zeros to draw boundary lines at consecutive multiples of π.
Mark the zero halfway between the boundaries.
Mark height 1 one quarter-period after the left boundary and height −1 one quarter-period before the right boundary.
Draw the falling continuous branch, then copy it every π.
Graph the branch of y = cot x that passes through the point (, 0), then extend the graph using the period. The three-column table gives exact values on this branch: cot() = , cot() = 0 and cot() = −. The table lists each input as a count of sixths of π, so 8, 9 and 10 stand for , and . It rounds the outputs to two decimal places: 0.58, 0 and −0.58.
The branch lies between the dashed asymptotes x = π and x = 2π. It passes through (, ), (, 0) and (, −) and falls from left to right. It rises without bound as x approaches π from the right and falls without bound as x approaches 2π from the left. The full graph repeats this branch between x = nπ and x = (n + 1)π for every integer n, with a dashed asymptote at each x = nπ.
Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at that gives the valid output 0.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Radian
An angle unit based on arc length divided by radius. A half-turn is π radians, equal to 180°.
Integer
A whole count, including positive counts, negative counts and zero.
Multiple
A number obtained by multiplying a given number by an integer.
Domain
The set of inputs for which a function has an output.
Range
The set of output values a function actually reaches.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Vertical asymptote
A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.
Continuous
Having no break within an allowed interval. Each branch here is continuous even though excluded inputs separate branches.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Unbounded
Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.
Period
A positive horizontal input distance after which the whole pattern repeats.
Symmetry
A picture matches itself after a specified reflection or rotation.
Origin
The crossing of the axes, with coordinates (0, 0).
Amplitude
A finite half-height between a bounded wave's highest and lowest outputs. None of these four whole graphs has a finite amplitude.
Increasing
Within an interval, a larger input gives a larger output.
Decreasing
Within an interval, a larger input gives a smaller output.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Ratio
One number compared with another by division, with a nonzero divisor.
Ray
A line that starts at one point and extends without end in one direction.
Quadrant
One of the four regions between the coordinate axes, numbered counterclockwise from upper right.
Cosecant: build a reciprocal graph from sine
Imagine a machine that keeps your position along a road but changes the height written on your sign.
Rule: csc x = , with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and csc(−x) = −csc x.
1. Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
2. Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
3. Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
4. Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
5. Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.
1. Find sine's zeros to locate excluded inputs and asymptotes.
2. Mark the shared points where sine is 1 or −1.
3. Use one reciprocal point on each side of a shared point to guide the curve.
4. Keep the sine sign, bend away from the x-axis, and repeat every 2π.
You need the graph pieces across one full turn, including the locations where no point exists. Sketch y = csc x on 0 ≤ x ≤ 2π using sine as the guide.
Asymptotes in the interval: x = 0, π, 2π.
Positive branch: 0 < x < π, vertex (, 1).
Negative branch: π < x < 2π, vertex (, −1).
Repeat the pattern every 2π.
Trap: taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Unit circle
A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Range
The set of output values a function actually reaches.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
x-intercept
A graph point on the horizontal axis, where the output is zero.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Reciprocal graph
A graph made by keeping each input and replacing every nonzero output y with 1 divided by y.
Vertical asymptote
A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Period
A positive horizontal input distance after which the whole pattern repeats.
Symmetry
A picture matches itself after a specified reflection or rotation.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
Origin
The crossing of the axes, with coordinates (0, 0).
Union
Joining two sets: a value in either set is allowed. The symbol is ∪.
Vertex
An angle's corner, where its rays start, or a reciprocal branch's turning point closest to the x-axis. The surrounding problem tells you which meaning applies.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Magnitude
A number's distance from zero, ignoring its sign.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
Secant: build a reciprocal graph from cosine
Think of the same height-changing machine with a different starting drawing.
Rule: sec x = , with x ≠ + nπ for every integer n. Its vertical asymptotes are x = + nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and sec(−x) = sec x.
1. Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
2. Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
3. Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
4. Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
5. Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.
1. Identify cosine zeros, because they are forbidden secant inputs.
2. Mark cosine's heights 1 and −1 as the secant vertices.
3. Take reciprocal heights at one or two additional inputs on each branch.
4. Connect the points with curves facing away from the x-axis and copy the pattern by 2π.
You need one complete positive branch and one complete negative branch. Sketch y = sec x on − ≤ x ≤ using cosine as the guide.
Asymptotes in the interval: x = −, , .
Positive branch: − < x < , vertex (0, 1).
Negative branch: < x < , vertex (π, −1).
The interval length and the repeating pattern are 2π.
Trap: secant uses cosine zeros, which lie at odd multiples of . Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Range
The set of output values a function actually reaches.
Undefined
No output exists at that input. Here the formula would divide by zero.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
x-intercept
A graph point on the horizontal axis, where the output is zero.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Reciprocal graph
A graph made by keeping each input and replacing every nonzero output y with 1 divided by y.
Vertical asymptote
A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Unbounded
Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.
Period
A positive horizontal input distance after which the whole pattern repeats.
Even function
A function whose domain includes opposite inputs together and has f(−x) = f(x). Its graph has y-axis symmetry.
Symmetry
A picture matches itself after a specified reflection or rotation.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
y-axis
The vertical coordinate line, whose points have input coordinate x = 0.
Origin
The crossing of the axes, with coordinates (0, 0).
Union
Joining two sets: a value in either set is allowed. The symbol is ∪.
Vertex
An angle's corner, where its rays start, or a reciprocal branch's turning point closest to the x-axis. The surrounding problem tells you which meaning applies.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Magnitude
A number's distance from zero, ignoring its sign.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
Read, sketch and remember all four graphs
Picture a route map with landmarks and gaps.
Rule: for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote. Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.
1. Write the quotient or reciprocal formula.
2. Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
3. Plot the known key points within each allowed branch.
4. Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
5. Repeat by the fundamental period and check the even or odd symmetry and the range.
Graph the branch of y = sec x that passes through the point (2π, 1), then sketch the neighboring downward branch through (3π, −1). Extend the graph using the period and the even symmetry of secant, and state the range. The three-column table gives exact values on the first branch: sec() = , sec(2π) = 1 and sec() = . The table lists each input as a multiple of π, so 1.75, 2 and 2.25 stand for , 2π and , and it shows rounded to 1.414.
The branch through (2π, 1) is an upward U between the vertical asymptotes x = and x = . Its lowest point is (2π, 1), and it passes through (, ) and (, ). Beside it is a downward U between x = and x = with highest point (3π, −1). The graph repeats every 2π, has vertical asymptotes x = + kπ for every integer k, and is symmetric about the y-axis because sec(−x) = sec x. The range is (−∞, −1] ∪ [1, ∞).
Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.
1. Write its defining formula and find the forbidden denominator-zero inputs.
2. Substitute into the denominator to confirm every marked asymptote.
3. Place the known key points and use the correct branch shape.
4. Repeat by its fundamental period.
5. Check its range and its even or odd point pairs.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Integer
A whole count, including positive counts, negative counts and zero.
Multiple
A number obtained by multiplying a given number by an integer.
Domain
The set of inputs for which a function has an output.
Range
The set of output values a function actually reaches.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Vertical asymptote
A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Unbounded
Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.
Period
A positive horizontal input distance after which the whole pattern repeats.
Fundamental period
The smallest positive period of a function.
Symmetry
A picture matches itself after a specified reflection or rotation.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
y-axis
The vertical coordinate line, whose points have input coordinate x = 0.
Origin
The crossing of the axes, with coordinates (0, 0).
Ratio
One number compared with another by division, with a nonzero divisor.