Read, sketch and remember all four graphs
Quick review (2 minutes)
Picture a route map with landmarks and gaps.
Rule: for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote. Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.
1. Write the quotient or reciprocal formula.
2. Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
3. Plot the known key points within each allowed branch.
4. Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
5. Repeat by the fundamental period and check the even or odd symmetry and the range.
Graph the branch of y = sec x that passes through the point (2π, 1), then sketch the neighboring downward branch through (3π, −1). Extend the graph using the period and the even symmetry of secant, and state the range. The three-column table gives exact values on the first branch: sec() = , sec(2π) = 1 and sec() = . The table lists each input as a multiple of π, so 1.75, 2 and 2.25 stand for , 2π and , and it shows rounded to 1.414.
The branch through (2π, 1) is an upward U between the vertical asymptotes x = and x = . Its lowest point is (2π, 1), and it passes through (, ) and (, ). Beside it is a downward U between x = and x = with highest point (3π, −1). The graph repeats every 2π, has vertical asymptotes x = + kπ for every integer k, and is symmetric about the y-axis because sec(−x) = sec x. The range is (−∞, −1] ∪ [1, ∞).
Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.
1. Write its defining formula and find the forbidden denominator-zero inputs.
2. Substitute into the denominator to confirm every marked asymptote.
3. Place the known key points and use the correct branch shape.
4. Repeat by its fundamental period.
5. Check its range and its even or odd point pairs.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Integer
A whole count, including positive counts, negative counts and zero.
Multiple
A number obtained by multiplying a given number by an integer.
Domain
The set of inputs for which a function has an output.
Range
The set of output values a function actually reaches.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Vertical asymptote
A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Unbounded
Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.
Period
A positive horizontal input distance after which the whole pattern repeats.
Fundamental period
The smallest positive period of a function.
Symmetry
A picture matches itself after a specified reflection or rotation.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
y-axis
The vertical coordinate line, whose points have input coordinate x = 0.
Origin
The crossing of the axes, with coordinates (0, 0).
Ratio
One number compared with another by division, with a nonzero divisor.
1 In plain words
Picture a route map with landmarks and gaps. Before drawing a route, you mark where it cannot go. Then you add a few known points and connect each allowed piece with its correct shape. The same plan works for all four graphs. Your denominator locates the gaps, your exact values locate the landmarks, and your period tells you how to copy the pattern. The summary below gathers facts you can now explain. Some facts deserve quick recall, but long lists of angles and points can be rebuilt from the circle. Practice rebuilding them instead of trying to memorize every row.
Explain it like I am five
Picture building a fence: set the posts, hang a panel between each pair, then repeat the section down the line. Sketching tan, cot, sec or csc works the same way.
Posts: write the function as a fraction and find where its bottom is 0; each such input gets a dashed vertical asymptote. Panels: plot a few known points and draw the right shape between posts, rising for tan, falling for cot, U shapes for sec and csc. Repeat: copy by the period, π for tan and cot, 2π for sec and csc.
Example: the posts of sec x = from 0 to 3π. Cosine is 0 at + nπ, for any integer n. Try n = 0, 1, 2: , , . The next, , is past 3π, which equals . At the ends cosine is 1 and −1, not 0, so no post there. Three posts.
Nothing here needs memorizing as a list: the bottom of each fraction gives the posts, and the circle gives the points.
2 Picture it
Reminder
Reminder: Denominator check, Interval endpoints, Fractions of π, Exact circle values, Period, Range, Symmetry
- Denominator check. sec() fails because cos() = 0.
- Interval endpoints. [−2π, 2π] includes ±2π; (−2π, 2π) would not.
- Fractions of π.
- Exact circle values. At π the point is (−1, 0), so sec π = −1.
- Period. tan(x + π) = tan x; csc(x + π) changes sign.
- Range. A reciprocal height is impossible because −1 < < 1.
- Symmetry. An odd pair is (x, y) and (−x, −y); secant instead keeps the height.
3 Why
A denominator zero identifies a missing angle input, while nearby signs explain the branch's direction. Exact values anchor the curve so a rough sketch has the right height. The range prevents reciprocal branches from entering the middle strip. Period checks horizontal repetition, and symmetry checks opposite sides of the drawing. These checks use different information, so agreement among them helps catch errors. No single sample point can verify the whole graph, but the combined structure makes a reliable parent-function sketch.
4 The rule
for these four parent graphs, every denominator-zero input is excluded and has unbounded nearby outputs, so its vertical line is a vertical asymptote.
Every plotted point must agree with the defining formula and its allowed output range. Period and symmetry describe the repeated and paired points.
The same idea, five ways
Say build the graph, then check it from several directions.
Each parent graph must agree with its formula, domain, range, period and symmetry.
- cosine-bottom family: tan, sec
- sine-bottom family: cot, csc
- odd: tan, cot, csc
- even: sec
- graph words: mark breaks, anchor branches, repeat and check
A route map needs correct gaps, landmarks and repeated sections.
The same idea, other ways
Read a function's column in the picture. The cosine-bottom pair shares one family, and the sine-bottom pair shares the other. Here n is any integer.
The quotient functions reach all real heights. The reciprocal functions stay outside the open strip between −1 and 1.
Quotients copy after one branch of width π. Reciprocal functions need two opposite-sign branches, totaling 2π.
Secant has equal heights at opposite inputs; the other three have opposite heights.
| Function | Undefined inputs and vertical asymptotes | Range | Fundamental period | Even or odd |
|---|---|---|---|---|
| tan x | π | odd | ||
| cot x | x = nπ | π | odd | |
| sec x | 2π | even | ||
| csc x | x = nπ | 2π | odd |
Part 1: Know cold, with memory devices
These few facts should come to mind quickly because they start every problem. Keep the denominator check, the quotient and reciprocal pairs, and the two period sizes ready. Use each short memory device with a worked case so the phrase points to a reason instead of replacing it.
- Know cold: check the bottom. Bottom 0 means undefined; top 0 over a nonzero bottom means output 0.
- Know cold: tan and sec have a cosine bottom; cot and csc have a sine bottom. Memory device: pair by the bottom.
- Know cold: quotients cancel two sign changes, so their fundamental period is π; reciprocals carry one sign change and need 2π.
- Know cold: even means equal heights; odd means opposite input and opposite output. Sec is even; tan, cot and csc are odd.
Check the bottom
Pair by the bottom
Quotients: π; reciprocals: 2π
Even: equal heights; odd: opposite heights
The same idea, five ways
Say the cue, then show why it works. The arrow ⇒ means if the statement on its left holds, then the statement on its right follows.
The short cues help you start a calculation without memorizing a long angle list.
- bottom = 0 ⇒ undefined
- top = 0 and bottom ≠ 0 ⇒ output 0
- = = π
- = = 2π
A route's few main landmarks are easier to remember than every street address.
cos bottom: tan and sec
sin bottom: cot and csc
Worked example
Use check the bottom
In plain words, apply the same memory cue to two different denominators. Decide whether cot() and sec() have outputs.
Show the steps and the answer
- .Its sine bottom is nonzero.
- would be , so it is undefined.Its cosine bottom is zero.
- cot() = 0.
- sec() is undefined.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Practice saying the cue and naming its denominator in the same sentence.
Part 2: Understand, then rebuild it when needed
You can rebuild long lists of axis angles, exact values and graph points from a few circle positions. Do not spend memory on a list that takes a few steps to recover. Start with the formula, find the denominator zeros, then use the circle's coordinates for the points between them. Rebuilding also gives you a check when you doubt a remembered answer.
- Rebuild forbidden angle lists from cos x = 0 or sin x = 0 and integer multiples of π.
- Rebuild exact heights from circle coordinates, then divide or take a reciprocal.
- Rebuild asymptote behavior from the denominator's sign near zero and the nonzero numerator.
- Rebuild full graphs by copying a period and checking the symmetry; the U-shaped branches come from reciprocal heights.
The same idea, five ways
Say start with the formula and rebuild the picture.
The graph follows from its denominator, a few exact heights and repetition.
- cot x =
- sec x =
- csc x =
Use a map's main roads to recover the smaller turns.
Worked example
Rebuilding y = csc x from its downward branch on (−π, 0)
Graph the branch of y = csc x that passes through the point (−, −1). Then extend the graph using the period and the odd symmetry of cosecant, and state the range. The three-column table gives exact values on this branch: csc(−) = −2, csc(−) = −1 and csc(−) = −2. The table lists each input as a count of sixths of π, so −5, −3 and −1 stand for −, − and −.
Show the steps and the answer
- Write the reciprocal formula: .Cosecant is defined as the reciprocal of sine, so sin x is the denominator. Any input that makes sin x equal 0 cannot be used.
- Set the denominator equal to 0. when for an integer k. The multiples of on either side of are and . Substitute to verify: and . Test just inside the branch: . Similarly, , so . Draw dashed vertical asymptotes at and .Both inputs make the denominator 0, so they are excluded from the domain. Right beside them sin x is a tiny negative number, so its reciprocal is a huge negative number. An excluded input whose nearby outputs are unbounded gives a vertical asymptote. No multiple of π lies strictly between −π and 0, so this branch has no other asymptote.
- Convert the table inputs: and sixths of are and . Confirm each output with the formula. , so . , so . , so . Plot and .Each plotted point must satisfy y = and stay in the allowed outputs y ≤ −1 or y ≥ 1. All three outputs are at most −1. All three inputs lie strictly between −π and 0, so they belong to the same branch.
- Draw a downward-opening U between the asymptotes. Start far below the x-axis just right of . Rise through to the highest point . Then fall through and drop toward as x approaches 0 from the left. The branch is symmetric about : the inputs and are each from it and share the output .On (−π, 0), sin x is negative. It equals −1 at x = − and rises toward 0 at both ends. Its reciprocal is therefore at most −1 and reaches −1 only at x = −. Its size grows without bound as sin x shrinks toward 0.
- Repeat by the fundamental period . Adding to each key point gives and , on a copy between and . Subtracting gives a copy between and with top . Next, check the odd symmetry: , so each point (a, b) pairs with . Reflecting the key points through the origin gives and . These form an upward U on with lowest point , which also repeats every . Range: .Sine has period 2π, so csc(x + 2π) = = = csc x, and shifted points stay on the graph. Sine is odd, so its reciprocal is odd and the graph is symmetric about the origin. Because |sin x| ≤ 1, every output has |csc x| ≥ 1, so no point lies strictly between y = −1 and y = 1.
Work to write
- y = csc x =
- sin x = 0 ⇒ x = kπ; sin(−π) = 0 and sin(0) = 0
- vertical asymptotes x = −π and x = 0 (csc(−0.01) ≈ −100)
- points (−, −2), (−, −1), (−, −2), all with y ≤ −1
- downward U on (−π, 0), highest point (−, −1), y → −∞ at both asymptotes
- period 2π: copy on (π, 2π) through (, −2), (, −1), (, −2)
- odd: csc(−x) = −csc x ⇒ upward U on (0, π), lowest point (, 1)
- range (−∞, −1] ∪ [1, ∞)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Do not memorize every point. Keep the circle and the four formulas ready to rebuild them.
Part 3: Put on the cheat sheet: printable summary
This compact card is the information to look up while studying or to put on an allowed cheat sheet. The longer derivations above tell you why each entry is true. On a closed-book exam you can recreate the card from the denominator pairs, the circle and the period argument. Here n always means any integer, including negative integers and zero.
- tan: . Exclude + nπ. Range (−∞, ∞). Fundamental period π. Odd; each branch rises.
- cot: . Exclude nπ. Range (−∞, ∞). Fundamental period π. Odd; each branch falls.
- sec: . Exclude + nπ. Range (−∞, −1] ∪ [1, ∞). Fundamental period 2π. Even; reciprocal of cosine.
- csc: . Exclude nπ. Range (−∞, −1] ∪ [1, ∞). Fundamental period 2π. Odd; reciprocal of sine.
tan: cos bottom; P = π; odd
cot: sin bottom; P = π; odd
sec: cos bottom; P = 2π; even
csc: sin bottom; P = 2π; odd
The same idea, five ways
Say use the card for a quick structure check.
The summary gathers the four parent graphs in one place.
- cosine zeros: + nπ
- sine zeros: nπ
- quotient range: (−∞, ∞)
- reciprocal range: (−∞, −1] ∪ [1, ∞)
A small map key helps you read a larger map.
Worked example
Check a reciprocal sketch using the card
A sketch labeled csc x has a branch passing through (π, 0). Is that possible? In plain words, check one claimed point against both domain and range.
Show the steps and the answer
- Input is excluded because .Setting the denominator equal to zero locates a forbidden input, and substitution verifies it.
- Output 0 is outside the range of cosecant.Every valid cosecant output is at least 1 or at most −1.
- Replace the claimed point with the asymptote and keep each neighboring branch away from the x-axis.The graph approaches that input with unbounded outputs; it never has an output there.
- The point (π, 0) is impossible.
- Draw the vertical asymptote x = π instead.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- A summary card is a check, not a substitute for the denominator and reciprocal explanations.
5 How
- Write the quotient or reciprocal formula.
- Set its denominator equal to 0 to locate the asymptotes; substitute a candidate back to verify the zero.
- Plot the known key points within each allowed branch.
- Draw the rising tangent, falling cotangent, or reciprocal U-shaped branches.
- Repeat by the fundamental period and check the even or odd symmetry and the range.
Sketch a parent graph and audit the result
- Write its defining formula and find the forbidden denominator-zero inputs.
- Substitute into the denominator to confirm every marked asymptote.
- Place the known key points and use the correct branch shape.
- Repeat by its fundamental period.
- Check its range and its even or odd point pairs.
6 Worked example
Worked example
Secant: the upward branch through (2π, 1) and its neighbor
Graph the branch of y = sec x that passes through the point (2π, 1), then sketch the neighboring downward branch through (3π, −1). Extend the graph using the period and the even symmetry of secant, and state the range. The three-column table gives exact values on the first branch: sec() = , sec(2π) = 1 and sec() = . The table lists each input as a multiple of π, so 1.75, 2 and 2.25 stand for , 2π and , and it shows rounded to 1.414.
Show the steps and the answer
- Write secant as a reciprocal formula: .Secant is the reciprocal of cosine, so each output is 1 divided by cos x. The formula has a value only where its denominator cos x is not 0.
- Set the denominator equal to 0: gives for any integer k. The two zeros on either side of are and . Substitute them back: , and .A denominator-zero input is excluded. Just beside it cos x is close to 0, so grows without bound, which makes each such vertical line a vertical asymptote. Consecutive zeros are π apart, so no other asymptote lies between and , and these two lines bound the branch through (2π, 1).
- Find the allowed outputs of this branch. For , the angle is between and , so . Therefore , and only where , which is at .The reciprocal of a positive number no greater than 1 is at least 1. So every point of this branch must lie on or above the line y = 1, and the branch opens upward.
- Verify and plot the table points. gives . gives . gives . Plot and , at , 5.50 and 7.07.Each plotted point must agree with sec x = and with the allowed outputs y ≥ 1. The two points sit either side of 2π at the same height, so the branch is symmetric about the line x = 2π.
- Draw the upward U. Start high beside , fall through to the lowest point , rise through , and climb beside without ever touching either asymptote.From x = to x = 2π, cos x increases from 0 to 1, so its reciprocal falls from unbounded values down to 1. From x = 2π to x = , cos x decreases from 1 toward 0, so sec x increases without bound. Near both asymptotes cos x approaches 0 through positive values, so the outputs head to +∞.
- Sketch the neighboring branch. The next zero of cos x is , since . For . gives . gives . Draw a downward U between and through , the highest point , and .The reciprocal of a negative number between −1 and 0 is at most −1, so this branch lies on or below y = −1. Near its asymptotes cos x approaches 0 through negative values, so the outputs fall without bound.
- Repeat by the fundamental period . The window from to holds one upward and one downward branch, and copies of it shifted by , … in both directions give the whole graph. For example, shifting the first branch left by gives the upward branch between and through , (0, 1) and . For integers k, the asymptotes are , the lowest points of the upward branches are , and the highest points of the downward branches are .cos(x + 2π) = cos x, so sec(x + 2π) = sec x and every point (x, y) repeats at (x + 2π, y). The period is 2π and not π because sec(x + π) = −sec x, so a shift of π carries an upward branch onto a downward one.
- Check the even symmetry. , so the graph is symmetric about the y-axis. The mirror image of is , and gives . The period gives the same value: , and .Even symmetry pairs each point (x, y) with (−x, y). The paired point agrees with both the formula and the period, so the extended graph is consistent. The copy through (0, 1) is its own mirror image.
- State the range. Wherever sec x is defined, either , giving (the upward branches), or , giving (the downward branches). The range is .cos x always lies between −1 and 1, so no output of sec x lies strictly between −1 and 1. The values 1 and −1 are reached at x = 2π and x = 3π, and the branches climb or fall without bound near the asymptotes.
Work to write
- sec x =
- cos x = 0 gives x = + kπ; check: cos() = 0 and cos() = 0
- Vertical asymptotes of the branch: x = and x =
- sec(2π) = 1, sec() = = , sec() =
- Upward U with lowest point (2π, 1); sec x ≥ 1 on this branch
- Downward U between x = and x = with highest point (3π, −1)
- Period 2π: sec(x + 2π) = sec x; asymptotes x = + kπ
- Even: sec(−x) = sec x, so sec(−) =
- Range: (−∞, −1] ∪ [1, ∞)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Before sketching, mark forbidden inputs. Before accepting the sketch, check its heights and repeat distance.
- In the summary, n is any integer; +nπ includes every angle in the notation ±nπ because negative integers supply the minus cases.
7 The trap
Taking the summary as four arbitrary rows. Rebuild each excluded-input family from its denominator and each period from what a half-turn does to the signs.
Keep in mind
- On a one-page handwritten cheat sheet, the summary table (asymptotes, range, period, even or odd) and a thumbnail of each graph cover this section, and the rest rebuilds from the four fractions.
- Test the endpoints of a closed interval too: on [0, 3π], cot x has posts at both ends, since sine is 0 at 0 and at 3π.
- Tangent's zeros, x = nπ, are not its posts; its posts sit halfway between, at + nπ.
- Check a finished sketch three ways: sec and csc never enter −1 < y < 1, the pattern repeats at the right period, and only sec is symmetric about the y-axis.
Memory hook
Posts, panels, repeat: bottom zeros are posts, key points and shape make panels, the period repeats them. Tan climbs, cot slides, sec and csc cup.
Flash cards
Say the answer out loud, then flip.