Secant: build a reciprocal graph from cosine
Quick review (2 minutes)
Think of the same height-changing machine with a different starting drawing.
Rule: sec x = , with x ≠ + nπ for every integer n. Its vertical asymptotes are x = + nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and sec(−x) = sec x.
1. Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
2. Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
3. Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
4. Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
5. Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.
1. Identify cosine zeros, because they are forbidden secant inputs.
2. Mark cosine's heights 1 and −1 as the secant vertices.
3. Take reciprocal heights at one or two additional inputs on each branch.
4. Connect the points with curves facing away from the x-axis and copy the pattern by 2π.
You need one complete positive branch and one complete negative branch. Sketch y = sec x on − ≤ x ≤ using cosine as the guide.
Asymptotes in the interval: x = −, , .
Positive branch: − < x < , vertex (0, 1).
Negative branch: < x < , vertex (π, −1).
The interval length and the repeating pattern are 2π.
Trap: secant uses cosine zeros, which lie at odd multiples of . Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Range
The set of output values a function actually reaches.
Undefined
No output exists at that input. Here the formula would divide by zero.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
x-intercept
A graph point on the horizontal axis, where the output is zero.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Reciprocal graph
A graph made by keeping each input and replacing every nonzero output y with 1 divided by y.
Vertical asymptote
A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Unbounded
Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.
Period
A positive horizontal input distance after which the whole pattern repeats.
Even function
A function whose domain includes opposite inputs together and has f(−x) = f(x). Its graph has y-axis symmetry.
Symmetry
A picture matches itself after a specified reflection or rotation.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
y-axis
The vertical coordinate line, whose points have input coordinate x = 0.
Origin
The crossing of the axes, with coordinates (0, 0).
Union
Joining two sets: a value in either set is allowed. The symbol is ∪.
Vertex
An angle's corner, where its rays start, or a reciprocal branch's turning point closest to the x-axis. The surrounding problem tells you which meaning applies.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Magnitude
A number's distance from zero, ignoring its sign.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
1 In plain words
Think of the same height-changing machine with a different starting drawing. This time you feed it cosine heights. It leaves each horizontal position alone and replaces the height with one divided by that height. At the center, cosine has height one, so secant also has height one. Half a turn farther along, cosine has height negative one, so secant has height negative one. Zero heights still cannot pass through the machine. The finished picture has a curved positive branch centered at zero and a curved negative branch centered at π. The pattern repeats after a full turn.
Explain it like I am five
Picture laying tracing paper over the cosine wave and redrawing it with one rule: keep each input x and replace each height h with 1 ÷ h, its reciprocal. The new drawing is secant, sec x = .
Walk along it. At x = 0 cosine is 1, so secant is 1: the bottom of an upward U. As x moves toward (about 1.57), cosine shrinks through 0.5, 0.1 and 0.01, and secant grows through 2, 10 and 100. At x = cosine is 0, so secant has no value: draw a dashed vertical asymptote there. Past it cosine is negative, so secant is negative; at x = π cosine is −1, so secant is −1, the top of an upside-down U.
Asymptotes stand wherever cos x = 0, at x = + nπ. The branches never enter the band between −1 and 1, the pattern repeats every 2π, and the graph matches its mirror image across the y-axis because secant is even.
2 Picture it
Reminder
Reminder: Coordinates, Radians, Unit-circle cosine, Reciprocal graph, Fraction division, Negative division, Rationalizing a denominator, Zero denominator, Integer multiples, Intervals and union, Range, Even symmetry, Period, Vertical asymptote
- Coordinates. A point lists input then height: (π, −1) means input π and output −1.
- Radians. Graph inputs use radians: π = 180° and = 270°.
- Unit-circle cosine. Cosine is the unit-circle horizontal coordinate: cos() = .
- Reciprocal graph. Keep the input and take one divided by a nonzero height: (, ) becomes (, 2).
- Fraction division. Dividing by a fraction multiplies by its reciprocal: 1 ÷ = 1 × = 2.
- Negative division. One divided by a negative stays negative: 1 ÷ (−) = −2.
- Rationalizing a denominator. Multiply top and bottom by the same root: = = .
- Zero denominator. Exclude an input that makes the bottom zero: cos() = 0 makes sec() undefined.
- Integer multiples. In + nπ, n may be any integer: n = −1 gives −, and n = 1 gives .
- Intervals and union. Parentheses exclude boundaries, and ∪ joins permitted pieces: (−, ) excludes both asymptote inputs.
- Range. The reciprocal range includes its edge heights: y ≤ −1 or y ≥ 1 allows −1 and 1 but excludes .
- Even symmetry. An even function keeps its height at opposite inputs: sec(−) = sec() = 2.
- Period. A 2π period repeats a height: sec(−π + 2π) = sec π = −1.
- Vertical asymptote. A shrinking nonzero denominator produces unbounded nearby heights: cosine approaching zero makes secant's magnitude grow.
3 Why
Secant comes from sec x = . Cosine is zero at x = + nπ, so those inputs make the denominator zero and create the asymptotes. Its heights stay between −1 and 1, giving reciprocal heights at or beyond ±1. Cosine is even, so opposite inputs have equal cosine values and equal reciprocals. Cosine repeats every 2π, and its reciprocal repeats with it. A shift by π changes the sign instead of repeating a nonzero height.
4 The rule
, with for every integer n.
Its vertical asymptotes are , its range is , its period is , and .
The same idea, five ways
Secant of x is one divided by cosine of x.
A secant graph takes reciprocal cosine heights at unchanged inputs.
- sec x =
- Domain: {x | x is real and x ≠ + nπ, for every integer n}
- Range: y ≤ −1 or y ≥ 1
- Range: (−∞, −1] ∪ [1, ∞)
- sec(x + 2π) = sec x
- sec(−x) = sec x
- Graph words: reciprocal cosine branches with symmetry about the y-axis
Like: using a different set of height measurements in the same reciprocal machine.
The same idea, other ways
The cosine wave begins at (0, 1), so secant's positive vertex begins there too. The zeros at − and frame that branch. Cosine's bottom at (π, −1) locates the next negative vertex.
Cosine height becomes secant height 2 because × 2 = 1. Cosine height − becomes −2 because (−) × (−2) = 1. Neither input nor sign changes.
cos x = → sec x = 2
cos x = − → sec x = −2
Cosine gives the same height at x and −x. Taking the reciprocal of equal heights gives equal answers. Thus the secant points (, 2) and (−, 2) match across the y-axis.
Part 1: The positive secant branch centered at 0
Picture a bowl directly above the origin. Its lowest point sits at height one, and the two sides match across the y-axis. This comes from the cosine wave, whose highest point is at input zero. As you walk left or right from zero toward the nearest cosine zeros, the positive cosine height shrinks. Its reciprocal therefore rises. The boundary inputs are negative π over two and positive π over two, and neither is part of secant's branch.
- Rule: on − < x < , sec x ≥ 1.
- Rule: the vertex is (0, 1), shared with cosine.
- Rule: x = − and x = are the bounding asymptotes; opposite inputs have equal heights.
Reminder
Reminder: Reciprocal signs
- Reciprocal signs. 1 ÷ = 2, and 1 ÷ (−) = −2; the sign stays the same.
The same idea, five ways
Between negative pi over two and pi over two, secant is one or greater.
The positive branch has its lowest point at input zero and is symmetric about the y-axis.
- sec x ≥ 1
- Vertex: (0, 1)
- sec(−x) = sec x
- Graph words: upward-opening curved branch centered at 0
Like: a bowl centered above the origin, with its bottom one unit above the road.
Worked example
Three points on secant's central branch
You need the central turning point and a matching point on each side. Sketch the secant branch on − < x < .
Show the steps and the answer
- Draw the two boundary lines and check .These two zero-denominator inputs are excluded and locate the asymptotes.
- Mark (0, 1).The guide height is cos 0 = 1, whose reciprocal is 1.
- Mark .Cosine at 60° is , and 1 ÷ = 2.
- Mark and connect both sides through (0, 1), bending upward toward the boundary lines.Secant is even, so the opposite input has the same height; both sides grow as the positive cosine denominator shrinks.
- Interval: (−, ).
- Vertex: (0, 1).
- Supporting points: (−, 2) and (, 2).
- Shape: one upward-opening positive branch.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Start at the cosine peak (0, 1), then build matching reciprocal points on both sides.
Part 2: The negative secant branch centered at π
Picture an upside-down bowl whose middle sits below the input π. Its highest point has height negative one. The cosine guide is negative between π over two and three π over two, so all the reciprocal heights there are negative too. At π the guide reaches negative one, which keeps its value after reciprocation. To either side, cosine moves toward zero while staying negative. Secant then moves downward, farther from the x-axis, approaching the two boundary lines.
- Rule: on < x < , sec x ≤ −1.
- Rule: the vertex is (π, −1), shared with cosine.
- Rule: x = and x = are the bounding asymptotes, and the branch opens downward.
Reminder
Reminder: Reciprocal signs
- Reciprocal signs. 1 ÷ = 2, and 1 ÷ (−) = −2; the sign stays the same.
The same idea, five ways
Between pi over two and three pi over two, secant is negative one or less.
The negative branch has its highest point at input pi.
- sec x ≤ −1
- Vertex: (π, −1)
- Graph words: downward-opening curved branch centered at π
Like: an upside-down bowl hanging below the input pi.
Worked example
Three points on secant's negative branch
You need the turning point and two supporting points for the negative piece. Sketch the secant branch on < x < .
Show the steps and the answer
- Draw the two boundary lines and verify .This confirms the denominator zeros that separate the negative branch from neighboring branches.
- Mark .Cos π = −1, and = −1.
- Mark and .At 120° and 240° the unit-circle horizontal coordinates are −, whose reciprocal is −2. Rebuild them from : = π − reverses the horizontal coordinate; = − + 2π keeps that negative cosine.
- Connect the points with a downward-opening curve approaching both boundary lines.Cosine stays negative and approaches zero at both ends, so secant becomes negative with unbounded magnitude.
- Interval: (, ).
- Vertex: (π, −1).
- Supporting points: (, −2) and (, −2).
- Shape: one downward-opening negative branch.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Check negative supporting points by multiplying their height by the cosine guide height.
5 How
- Lightly sketch y = cos x as the guide wave. Keep its horizontal inputs fixed.
- Draw a vertical asymptote at every x-intercept of cosine. Set cos x = 0 to locate the forbidden denominator inputs, then plug them back into cosine to confirm zero.
- Keep the points where cosine is 1 or −1. They are also points on secant and become the branch vertices.
- Between asymptotes draw a curved U shaped branch opening away from the x-axis. The branch never enters −1 < y < 1. Use reciprocal cosine heights to place the curve; its U shape describes the bend rather than giving a different equation.
- Repeat the two-branch pattern every 2π. Use the y-axis symmetry to check matching points at opposite inputs.
Build secant from a cosine guide
- Identify cosine zeros, because they are forbidden secant inputs.
- Mark cosine's heights 1 and −1 as the secant vertices.
- Take reciprocal heights at one or two additional inputs on each branch.
- Connect the points with curves facing away from the x-axis and copy the pattern by 2π.
6 Worked example
Worked example
A full cosine-guided secant period
You need one complete positive branch and one complete negative branch. Sketch y = sec x on − ≤ x ≤ using cosine as the guide.
Show the steps and the answer
- Draw the cosine guide using the cosine fntable visual.The starting heights appear directly below the angle inputs.
- Set to locate forbidden inputs: . Plug them back in: .These values make the secant denominator zero, so each is excluded and receives an asymptote.
- Keep (0, 1) and .Cosine has heights 1 and −1 there, and their reciprocals have the same values.
- Read the columns under and . Change each cosine height to secant height 2.The positive branch lies between − and , and these points guide its two sides.
- Read the columns under and . Change each cosine height to secant height .The negative branch lies between and , and both support points remain negative. = π − , so vertical-axis reflection reverses cosine. = − + 2π; reflection across the horizontal axis and a full turn both keep that cosine.
- Draw an upward-opening curved branch centered at 0 and a downward-opening curved branch centered at .Near either boundary the cosine height approaches zero with the branch's sign, so the reciprocal moves away from the x-axis without bound.
- Asymptotes in the interval: x = −, , .
- Positive branch: − < x < , vertex (0, 1).
- Negative branch: < x < , vertex (π, −1).
- The interval length and the repeating pattern are 2π.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 3
Secant at the origin's input
You need the secant height at input zero. Evaluate sec 0 and locate its point.
Show the steps and the answer
- Use .The unit-circle point at 0° is (1, 0), and cosine is its horizontal coordinate.
- Compute .Secant is the reciprocal of cosine.
- Plot (0, 1).The unchanged input is zero and the new output is 1.
- sec 0 = 1.
- Point: (0, 1).
Rung 2 of 3
The negative branch at and beside its vertex
You need the negative branch's central height and one neighboring height. Evaluate sec π and sec().
Show the steps and the answer
- Use and .The unit-circle horizontal coordinates at 180° and 120° give these exact cosine values.
- Compute .The reciprocal of −1 is −1, locating the negative vertex.
- Compute .Dividing one by a negative half gives a negative output of magnitude 2.
- Plot and below the x-axis.Both inputs lie in the cosine-negative interval (, ), so their secant heights are negative.
- sec π = −1.
- sec() = −2.
Rung 3 of 3
A full period with a negative-input branch
You need two complete secant branches including the one centered at negative pi. Sketch y = sec x on − ≤ x ≤ and state the usable inputs within this interval.
Show the steps and the answer
- Lightly sketch cosine, then solve to locate the forbidden inputs . Plug them back into cosine and verify that all three values are zero.This finds the zero-denominator inputs so they can be excluded and marked as asymptotes.
- Keep the guide-wave points and (0, 1).Cosine has heights −1 and 1 there, so the reciprocal heights remain −1 and 1.
- Add on the negative branch and on the positive branch.The guide heights are − and , and their reciprocals are −2 and 2.
- Draw a downward-opening branch centered at and an upward-opening branch centered at 0, each approaching its bounding asymptotes.The branches keep cosine's signs and stay outside the band −1 < y < 1.
- Write the usable inputs as .Open endpoints remove the three denominator zeros while keeping all remaining inputs in the interval.
- Asymptotes: x = −, −, .
- Vertices: (−π, −1) and (0, 1).
- Usable inputs: (−, −) ∪ (−, ).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- 'sec pairs with cos' identifies the guide wave and the denominator to check.
- the first secant vertex is (0, 1); the next is (π, −1). These two points distinguish secant from cosecant.
- opposite secant inputs have the same height. Use this y-axis symmetry to check the central branch.
- touching the guide at ±1 does not make the whole curves equal. All smaller nonzero guide magnitudes produce reciprocal magnitudes greater than 1.
- mark all cosine zeros before drawing any branch, then keep every branch outside −1 < y < 1.
7 The trap
secant uses cosine zeros, which lie at odd multiples of . Cosecant uses sine zeros at multiples of π. Check the denominator before placing any asymptote.
Keep in mind
- Secant's asymptotes come from cosine's zeros, + nπ, not sine's: x = 0 is a vertex of secant, not an asymptote.
- Secant is even, so its graph is its own mirror image across the y-axis: sec(−1.2) = sec 1.2 ≈ 2.76.
- Secant and cosecant have the same U shapes, shifted: secant's first upward vertex is at x = 0, cosecant's at x = .
Memory hook
Secant sits on cosine: its U shapes rest on cosine's peaks and valleys, and its walls stand where cosine crosses zero, at + nπ.
Flash cards
Say the answer out loud, then flip.