Cosecant: build a reciprocal graph from sine
Quick review (2 minutes)
Imagine a machine that keeps your position along a road but changes the height written on your sign.
Rule: csc x = , with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ, its range is (−∞, −1] ∪ [1, ∞), its period is 2π, and csc(−x) = −csc x.
1. Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
2. Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
3. Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
4. Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
5. Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.
1. Find sine's zeros to locate excluded inputs and asymptotes.
2. Mark the shared points where sine is 1 or −1.
3. Use one reciprocal point on each side of a shared point to guide the curve.
4. Keep the sine sign, bend away from the x-axis, and repeat every 2π.
You need the graph pieces across one full turn, including the locations where no point exists. Sketch y = csc x on 0 ≤ x ≤ 2π using sine as the guide.
Asymptotes in the interval: x = 0, π, 2π.
Positive branch: 0 < x < π, vertex (, 1).
Negative branch: π < x < 2π, vertex (, −1).
Repeat the pattern every 2π.
Trap: taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Unit circle
A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Range
The set of output values a function actually reaches.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
x-intercept
A graph point on the horizontal axis, where the output is zero.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Reciprocal graph
A graph made by keeping each input and replacing every nonzero output y with 1 divided by y.
Vertical asymptote
A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Period
A positive horizontal input distance after which the whole pattern repeats.
Symmetry
A picture matches itself after a specified reflection or rotation.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
Origin
The crossing of the axes, with coordinates (0, 0).
Union
Joining two sets: a value in either set is allowed. The symbol is ∪.
Vertex
An angle's corner, where its rays start, or a reciprocal branch's turning point closest to the x-axis. The surrounding problem tells you which meaning applies.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Magnitude
A number's distance from zero, ignoring its sign.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
1 In plain words
Imagine a machine that keeps your position along a road but changes the height written on your sign. A height of one stays one. A height of one half becomes two. A negative height stays negative when the machine takes its reciprocal, meaning one divided by that height. Cosecant uses the sine wave as its starting picture. You keep every horizontal input and change its vertical output. Where sine has height zero, the machine cannot produce an answer. Those missing inputs separate the finished graph into curved pieces called branches. The pieces bend away from the road, which represents the x-axis. The branch's turning point nearest the x-axis is its vertex.
Explain it like I am five
Picture buying gum with 1 dollar. At 50 cents a piece you get 2 pieces; at 25 cents, 4; at 10 cents, 10. Pieces = 1 ÷ price in dollars, so cheaper gum means more pieces, and a price of 0 has no answer. That 1 ÷ number is the number's reciprocal, and cosecant is the reciprocal of sine: csc x = .
Start from the sine wave and keep every input x. Change each height h to 1 ÷ h: height 1 stays 1, becomes 2, − becomes −2; the sign never changes. Where sine is 0, at x = nπ (0, π, 2π and so on), draw a dashed vertical asymptote, a line the graph approaches but never reaches, instead of a point.
One full turn: between 0 and π sine is a positive hump, so cosecant is a U opening upward with lowest point (, 1). Between π and 2π sine is a negative dip, so cosecant is an upside-down U with highest point (, −1). No point lands strictly between −1 and 1.
2 Picture it
Reminder
Reminder: Coordinates, Radians, Unit-circle sine, Reciprocals and fraction division, Negative division, Rationalizing a denominator, Zero denominator, Integer multiples, Intervals and union, Range, Odd symmetry, Period, Vertical asymptote
- Coordinates. The first coordinate is input and the second is height: (, 2) means input , output 2.
- Radians. Graph inputs are radians: = 90° and 2π = 360°.
- Unit-circle sine. Sine is the vertical coordinate on the unit circle: sin() = .
- Reciprocals and fraction division. Divide by a fraction by multiplying by its reciprocal: 1 ÷ = 1 × = 2.
- Negative division. A positive divided by a negative is negative: 1 ÷ (−) = −2.
- Rationalizing a denominator. Multiply top and bottom by the same nonzero root: = = .
- Zero denominator. A fraction cannot have zero in its denominator: sin π = 0 makes undefined.
- Integer multiples. An integer n includes negative integers, zero and positive integers: x = nπ includes −π, 0 and π.
- Intervals and union. Open parentheses exclude endpoints and ∪ joins pieces: (0, π) ∪ (π, 2π) excludes 0, π and 2π.
- Range. Range names usable output heights: csc x ≥ 1 or csc x ≤ −1 includes 1 and −1 but excludes 0.
- Odd symmetry. Odd symmetry changes both signs: (, 2) gives (−, −2).
- Period. A period repeats outputs at shifted inputs: csc(x + 2π) = csc x wherever defined.
- Vertical asymptote. Nearby outputs grow without bound at an asymptote: near x = 0, the small sine denominator makes cosecant's magnitude large.
3 Why
The reciprocal identity csc x = changes only the output, so an input cannot move sideways. Sine lies between −1 and 1. A positive sine height becomes at least 1 after reciprocation, and a negative height becomes at most −1. Heights 1 and −1 keep their values. Near a sine zero, division by a tiny nonzero height produces outputs of growing magnitude. This makes the vertical asymptotes and the curved branches follow directly from the sine guide.
4 The rule
, with for every integer n.
Its vertical asymptotes are , its range is , its period is , and .
The same idea, five ways
Cosecant of x is one divided by sine of x.
A reciprocal graph keeps each input and replaces its nonzero output with one divided by that output.
- (x, y) becomes (x, ) when y ≠ 0
- csc x =
- Domain: {x | x is real and x ≠ nπ, for every integer n}
- Range: y ≤ −1 or y ≥ 1
- Range: (−∞, −1] ∪ [1, ∞)
- Graph words: two curved branches per 2π, opening away from the x-axis
Like: a machine changes a sign's height but leaves its address alone.
The same idea, other ways
Start with the dashed sine wave. Every zero becomes a vertical boundary. The top at 1 and bottom at −1 become the nearest points of cosecant to the x-axis. All other nonzero heights move farther from the axis.
Keep the input on its road sign. Sine writes on that sign. The reciprocal machine changes the height to 2 because 1 ÷ = 2. The input is still .
A sine height of would produce a cosecant height of 10. A height of would produce 100. The closer a nonzero sine height gets to zero, the farther its reciprocal moves from the x-axis.
sin x = 0: csc x is undefined
One divided by 1 is 1, and one divided by −1 is −1. These are the shared guide-wave points. No sine height has magnitude larger than 1, so no cosecant height can have magnitude smaller than 1.
csc x ≥ 1 or csc x ≤ −1
Part 1: Reciprocal graph: keep x and replace the height
Think of the input as an address and the output as a measurement delivered there. Taking a reciprocal changes the measurement, not the address. At one address sine might deliver one half; cosecant delivers two at that same address. At another address sine might deliver negative one half; cosecant delivers negative two. An address where sine delivers zero cannot receive a cosecant measurement, because dividing one by zero is undefined.
- Rule: a nonzero guide point (x, y) becomes (x, ).
- Rule: guide height 0 produces an excluded input, not a point.
- Rule: reciprocal heights keep their sign; heights ±1 stay fixed.
Reminder
Reminder: Reciprocal signs
- Reciprocal signs. 1 ÷ = 2, and 1 ÷ (−) = −2; the sign stays the same.
The same idea, five ways
Keep the angle and take one divided by the height.
Each nonzero sine output is replaced by its reciprocal at the same input.
- (x, sin x) becomes (x, csc x)
- csc x =
- sin x × csc x = 1 when sin x ≠ 0
Like: changing the measurement delivered to an address while keeping the address.
Worked example
A reciprocal point rather than a reflected point
You need the cosecant point at the same input as a known sine point. Convert (, ) from the sine guide to cosecant.
Show the steps and the answer
- Keep .A reciprocal graph changes the height and does not change the input.
- Calculate .Dividing by a fraction multiplies by its reciprocal.
- Plot .The cosecant point has the original input and the new height.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write the original input again before computing the new height.
Part 2: The positive cosecant branch on (0, π)
Picture a curved bowl above a road. Its lowest point is one unit above the road. The sides climb steeply as they approach two boundary lines. Sine is positive between zero and π, so cosecant stays positive throughout that interval. Sine reaches its highest value at the middle, where its reciprocal reaches the positive branch's lowest value. The middle point is called the vertex, meaning the turning point of this branch.
- Rule: on 0 < x < π, csc x ≥ 1.
- Rule: the vertex is (, 1), shared with sine.
- Rule: the branch approaches x = 0 and x = π without reaching either line.
Reminder
Reminder: Reciprocal signs
- Reciprocal signs. 1 ÷ = 2, and 1 ÷ (−) = −2; the sign stays the same.
The same idea, five ways
Between zero and pi, cosecant is one or greater.
The positive branch has its lowest point at pi over two.
- 0 < x < π
- x ∈ (0, π)
- csc x ≥ 1
- Vertex: (, 1)
- Graph words: upward-opening curved branch
Like: a bowl above a road, with its bottom one unit above the road.
Worked example
Three points on the positive branch
You need the middle and two supporting points for the positive piece. Sketch the cosecant branch on 0 < x < π.
Show the steps and the answer
- Draw boundary lines and , after checking .These zeros would make the denominator zero, so they mark excluded inputs and asymptotes.
- Mark .The unit-circle sine value is sin() = 1, whose reciprocal is 1.
- Mark and .Both unit-circle sine values are , so both reciprocal heights are 2. In particular, = π − , and vertical-axis reflection preserves sine.
- Draw a smooth upward-opening curve through these points, approaching each boundary line.Sine stays positive and approaches zero at both ends, so cosecant grows positive without bound there.
- Interval: (0, π).
- Vertex: (, 1).
- Supporting points: (, 2) and (, 2).
- Shape: one upward-opening positive branch.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The largest positive sine height gives the smallest positive cosecant height.
Part 3: The negative cosecant branch on (π, 2π)
Now picture an upside-down bowl below the road. Its highest point is one unit below the road. The sides fall as they approach the boundary lines. Sine is negative from π to two π, so cosecant is negative there too. The sine wave's bottom is negative one, which becomes negative one again after taking the reciprocal. This is the vertex of the negative branch. Its sides head downward, away from the x-axis, rather than upward through it.
- Rule: on π < x < 2π, csc x ≤ −1.
- Rule: the vertex is (, −1), shared with sine.
- Rule: the branch approaches x = π and x = 2π, opening downward away from the x-axis.
Reminder
Reminder: Reciprocal signs
- Reciprocal signs. 1 ÷ = 2, and 1 ÷ (−) = −2; the sign stays the same.
The same idea, five ways
From pi to two pi, cosecant is negative one or less.
The negative branch has its highest point at three pi over two.
- π < x < 2π
- x ∈ (π, 2π)
- csc x ≤ −1
- Vertex: (, −1)
- Graph words: downward-opening curved branch
Like: an upside-down bowl hanging below a road.
Worked example
Three points on the negative branch
You need the turning point and two supporting points for the negative piece. Sketch the cosecant branch on π < x < 2π.
Show the steps and the answer
- Draw boundary lines and , checking .This confirms that the two boundary inputs make the denominator zero and must be excluded.
- Mark .Sine is −1 at that input, and = −1.
- Mark and .Both sine values are −, so their reciprocal heights are −2. = π + reverses sine after a half-turn; = − + 2π keeps the reflected negative sine after a full turn.
- Draw the downward-opening curved branch through the three points.Its outputs remain negative and grow in magnitude near both zero-denominator boundaries.
- Interval: (π, 2π).
- Vertex: (, −1).
- Supporting points: (, −2) and (, −2).
- Shape: one downward-opening negative branch.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- On a negative branch, closest to the x-axis means highest, because −1 is above −2.
5 How
- Lightly sketch y = sin x as a guide wave. Its horizontal inputs stay fixed throughout the construction.
- Draw a vertical asymptote at every x-intercept of that wave. Set sin x = 0 to find inputs that would make the denominator zero, then check them in sine before excluding them.
- Keep every guide-wave point at height 1 or −1. Their reciprocals are the same heights, so the two curves share these points.
- Between consecutive asymptotes draw a curved U shaped branch opening away from the x-axis. Above the axis it opens upward; below the axis it opens downward. U shaped describes the bend; it does not give a new equation for the curve. Keep using the reciprocal formula to find its heights.
- Copy the two-branch pattern left and right by 2π. Each branch stays in y ≥ 1 or y ≤ −1, and no point is drawn on an asymptote.
Build cosecant from a sine guide
- Find sine's zeros to locate excluded inputs and asymptotes.
- Mark the shared points where sine is 1 or −1.
- Use one reciprocal point on each side of a shared point to guide the curve.
- Keep the sine sign, bend away from the x-axis, and repeat every 2π.
6 Worked example
Worked example
A complete cosecant period
You need the graph pieces across one full turn, including the locations where no point exists. Sketch y = csc x on 0 ≤ x ≤ 2π using sine as the guide.
Show the steps and the answer
- Draw the sine guide from to , using the sine fntable visual.The sine row gives the starting height under each angle, and the reciprocal construction keeps that angle fixed.
- Set to find denominator zeros: in this interval. Plug them back in: .This finds the inputs that cannot be used in , so each gets an asymptote and no cosecant point.
- Keep and .The sine guide has height 1 and −1 there, and = 1 while = −1.
- Read the columns under and in the sine table. Replace their heights by .These two reciprocal points guide the positive branch on (0, π). Rebuild the farther input: = π − , so reflection across the vertical axis keeps sine .
- Read the columns under and . Replace their heights by .A positive numerator divided by a negative denominator gives a negative output, guiding the negative branch on (π, 2π). Here = π + , so a half-turn reverses sine. Also = 2π − , so reflecting to − and adding a full turn gives the same negative sine.
- Draw an upward-opening curved branch through , and a downward-opening curved branch through , approaching their boundary lines.As sine approaches zero from the branch's sign, the reciprocal magnitude grows without bound. Neither branch enters −1 < y < 1.
- Asymptotes in the interval: x = 0, π, 2π.
- Positive branch: 0 < x < π, vertex (, 1).
- Negative branch: π < x < 2π, vertex (, −1).
- Repeat the pattern every 2π.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 2 of 4
A positive fraction moves outward
You need the output at a sine height of one half. Evaluate csc() and locate its point.
Show the steps and the answer
- Use .The 30° unit-circle vertical coordinate is one half.
- Compute .Dividing by a fraction means multiplying by its reciprocal.
- Plot , above the vertex's height of 1.The positive reciprocal height stays positive and moves farther from the x-axis.
- csc() = 2.
- Point: (, 2).
Rung 3 of 4
A negative radical height
You need a negative cosecant output in exact form. Evaluate csc() and locate its point.
Show the steps and the answer
- Use . = − + 2π. A full turn keeps the sine, and reflecting across the horizontal axis gives sine −.
- Write .Taking the reciprocal exchanges the numerator and denominator of the sine height and keeps its negative sign.
- Multiply numerator and denominator by : .Since × = 2, this removes the root from the denominator without changing the fraction.
- Plot .The input stays fixed and the output belongs on the negative branch.
- csc() = −.
- Point: (, −).
Rung 4 of 4
Rebuild a full period across zero
You need both graph pieces across a full turn that includes negative inputs. Sketch y = csc x on −π ≤ x ≤ π and state the usable inputs within that interval.
Show the steps and the answer
- Lightly sketch sine on the interval, then solve to locate forbidden inputs: , 0, . Plug them back in: .This identifies every zero denominator in the interval so those inputs can be excluded and used as asymptote locations.
- Keep and from the guide wave.Their sine heights are −1 and 1, whose reciprocals are unchanged.
- Add and .The corresponding sine heights are − and , giving reciprocal heights −2 and 2.
- Draw a negative downward-opening branch on and a positive upward-opening branch on .Each branch keeps the sine sign and heads away from the x-axis as the sine denominator approaches zero.
- Write the usable inputs as .The three zero-denominator inputs are excluded, and the union joins the two remaining open intervals.
- Asymptotes: x = −π, 0, π.
- Vertices: (−, −1) and (, 1).
- Usable inputs in the requested interval: (−π, 0) ∪ (0, π).
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- write 'keep x, take 1 ÷ height' beside the sine guide before changing any point.
- sine's zeros give cosecant's asymptotes; sine's heights ±1 give cosecant's vertices.
- 'same sign, farther from zero' describes every nonzero sine height with magnitude below 1.
- one positive and one negative branch make the 2π period. Cosecant is odd, so opposite inputs give opposite heights.
7 The trap
taking a reciprocal is not reflecting the sine wave. The input stays fixed, the sign stays fixed, and the nonzero height becomes one divided by that height.
Keep in mind
- A reciprocal is not a reflection: height becomes 2, not −.
- Heights smaller than 1 in size move away from the axis: 0.04 becomes 25 and −0.02 becomes −50.
- The asymptotes of csc x sit at sine's zeros, x = nπ, and its turning points sit at sine's peaks and valleys, where csc x = 1 or −1.
Memory hook
Cosecant sits on sine: its U shapes rest on the tops and bottoms of the sine wave, and its walls stand where sine crosses zero.
Flash cards
Say the answer out loud, then flip.