Quarry School

Cotangent: the branch that falls

Subject: MathematicsLeans on: Coordinates and plottingLeans on: Radian fractionsLeans on: Integer multiplesLeans on: Unit-circle coordinatesLeans on: Fraction division and signsLeans on: Zero numerator and denominatorLeans on: Inequalities and interval endpointsLeans on: Substitution checksLeans on: Odd symmetryLeans on: Quadrant signs
Level 2 · BuildingAbout 14 min read14 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Picture a road that descends between two closed gates.

    Rule

    Rule: cot x = cosxsinx, with x ≠ nπ for every integer n. Its vertical asymptotes are x = nπ and its period is π.
    On (0, π), the continuous decreasing branch passes through (π4, 1), (π2, 0), and (3π4, −1).

    Step

    1. 1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.

    2. 2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.

    3. 3. Read the three table columns to plot (π4, 1), (π2, 0), and (3π4, −1).

    4. 4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.

    5. 5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.

    Strategy

    1. Locate and check the sine zeros to draw boundary lines at consecutive multiples of π.

    2. Mark the zero halfway between the boundaries.

    3. Mark height 1 one quarter-period after the left boundary and height −1 one quarter-period before the right boundary.

    4. Draw the falling continuous branch, then copy it every π.

    Question

    Graph the branch of y = cot x that passes through the point (3π2, 0), then extend the graph using the period. The three-column table gives exact values on this branch: cot(4π3) = 33, cot(3π2) = 0 and cot(5π3) = −33. The table lists each input as a count of sixths of π, so 8, 9 and 10 stand for 8π6, 9π6 and 10π6. It rounds the outputs to two decimal places: 0.58, 0 and −0.58.

    Answer

    The branch lies between the dashed asymptotes x = π and x = 2π. It passes through (4π3, 33), (3π2, 0) and (5π3, −33) and falls from left to right. It rises without bound as x approaches π from the right and falls without bound as x approaches 2π from the left. The full graph repeats this branch between x = nπ and x = (n + 1)π for every integer n, with a dashed asymptote at each x = nπ.

    Trap

    Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at π2 that gives the valid output 0.

    Term

    Tangent

    Definition

    Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

    Term

    Cotangent

    Definition

    Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.

    Term

    Sine

    Definition

    The vertical coordinate of the unit-circle point for an angle.

    Term

    Cosine

    Definition

    The horizontal coordinate of the unit-circle point for an angle.

    Term

    Radian

    Definition

    An angle unit based on arc length divided by radius. A half-turn is π radians, equal to 180°.

    Term

    Integer

    Definition

    A whole count, including positive counts, negative counts and zero.

    Term

    Multiple

    Definition

    A number obtained by multiplying a given number by an integer.

    Term

    Domain

    Definition

    The set of inputs for which a function has an output.

    Term

    Range

    Definition

    The set of output values a function actually reaches.

    Term

    Undefined

    Definition

    No output exists at that input. Here the formula would divide by zero.

    Term

    Numerator

    Definition

    The top of a fraction, the amount being divided.

    Term

    Denominator

    Definition

    The bottom of a fraction, the number you divide by. It must be nonzero.

    Term

    Zero

    Definition

    For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

    Term

    Reciprocal

    Definition

    One divided by a nonzero number. A number times its reciprocal equals 1.

    Term

    Vertical asymptote

    Definition

    A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.

    Term

    Continuous

    Definition

    Having no break within an allowed interval. Each branch here is continuous even though excluded inputs separate branches.

    Term

    Branch

    Definition

    One connected piece of a graph. Here consecutive asymptotes bound each branch.

    Term

    Unbounded

    Definition

    Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.

    Term

    Period

    Definition

    A positive horizontal input distance after which the whole pattern repeats.

    Term

    Symmetry

    Definition

    A picture matches itself after a specified reflection or rotation.

    Term

    Origin

    Definition

    The crossing of the axes, with coordinates (0, 0).

    Term

    Amplitude

    Definition

    A finite half-height between a bounded wave's highest and lowest outputs. None of these four whole graphs has a finite amplitude.

    Term

    Increasing

    Definition

    Within an interval, a larger input gives a larger output.

    Term

    Decreasing

    Definition

    Within an interval, a larger input gives a smaller output.

    Term

    Coordinate

    Definition

    One number in a point's address, recording a horizontal or vertical position.

    Term

    Ratio

    Definition

    One number compared with another by division, with a nonzero divisor.

    Term

    Ray

    Definition

    A line that starts at one point and extends without end in one direction.

    Term

    Quadrant

    Definition

    One of the four regions between the coordinate axes, numbered counterclockwise from upper right.

    1 In plain words

    Picture a road that descends between two closed gates. Near the first gate it is higher than any height you name. As you walk right, it drops through height 1, then 0, then −1, and keeps dropping near the second gate. That is one cotangent branch. Decreasing means a larger input gives a smaller output within that branch. The gates sit at 0 and π radians because those inputs make sine zero. Inside the gates, cotangent is continuous. At the midpoint π2, it has the ordinary output 0, even though tangent has no output there.

    Explain it like I am five

    Picture a playground slide squeezed between two walls. Near the left wall it starts higher than any ladder; it slopes down, passes ground level exactly halfway, and near the right wall it drops deeper than any pit. That is one branch (one unbroken piece) of cotangent, cot x = cosxsinx, cosine divided by sine.

    The walls stand where the bottom, sin x, is 0: at x = 0, at x = π, and at every multiple nπ (n any integer). Between them sine is positive while cosine slides from 1 to −1, so the fraction falls. Three points, with 22 (root 2 over 2, about 0.71):
    at π4, 22 ÷ 22 = 1;
    at π2, 0 ÷ 1 = 0;
    at 3π4, −22 ÷ 22 = −1.

    So the branch passes (π4, 1), (π2, 0) and (3π4, −1), falling from left to right. Decreasing means exactly this: a bigger input gives a smaller output. The same branch repeats every π.

    2 Picture it

    input x in radiansoutput cot x0undefinedπ/41π/203π/4−1πundefined↓ evaluate: input given, read the output below it
    The highlighted radian inputs give falling heights; the two endpoint columns are excluded.

    Reminder

    Reminder: Coordinates and plotting, Radian fractions, Integer multiples, Unit-circle coordinates, Fraction division and signs, Zero numerator and denominator, Inequalities and interval endpoints, Substitution checks, Odd symmetry, Quadrant signs
    • Coordinates and plotting. Put input first: cot(3π4) = −1 gives the point (3π4, −1).
    • Radian fractions. To copy left, subtract π with a common denominator: π4 − 4π4 = −3π4.
    • Integer multiples. x = nπ includes −π, 0, and π by taking n = −1, 0, and 1.
    • Unit-circle coordinates. At π2 the circle point is (0, 1), so cosine is 0 and sine is 1; cotangent uses 0 ÷ 1.
    • Fraction division and signs. A negative divided by a positive is negative: −22 ÷ 22 = −1.
    • Zero numerator and denominator. 01 = 0 is allowed, but 10 is undefined. Check the denominator before dividing.
    • Inequalities and interval endpoints. (0, π) excludes both endpoints; (0, π2] excludes 0 and includes π2.
    • Substitution checks. After locating a boundary, put it back into the denominator: sin π = 0 confirms that π must be excluded.
    • Odd symmetry. A half-turn changes both coordinates: (π4, 1) pairs with (−π4, −1).
    • Quadrant signs. Quadrant I is upper right, so cos ÷ sin is positive. Quadrant II is upper left, so negative cos ÷ positive sin is negative.

    3 Why

    Cotangent divides cosine by sine. On 0 < x < π, sine is positive. Cosine changes from positive to 0 to negative, so cotangent passes from positive through 0 to negative. The unit-circle ray turns from almost horizontal right to vertical to almost horizontal left; horizontal coordinate divided by positive vertical coordinate decreases throughout. Near 0 the quotient grows positively without bound; near π it grows negatively without bound. Adding π changes both signs and leaves their quotient unchanged.

    4 The rule

    cotx=cosxsinx, with x≠nπ for every integer n.

    Its vertical asymptotes are x=nπ and its period is π.
    On (0,π), the continuous decreasing branch passes through (π4,1),(π2,0), and (3π4,−1).

    The same idea, five ways

    Say it

    cotangent decreases within each branch, so farther right gives a lower output before the next asymptote.

    Write it

    the cotangent branch on (0, π) falls continuously from unbounded positive heights to unbounded negative heights.

    In math
    • cot x = cosxsinx
    • 0 < x < π
    • (0, π)
    • {x | 0 < x < π}
    • If 0 < x1 < x2 < π, then cot x1 > cot x2.
    • cot(π2) = 0
    • x = nπ: vertical asymptotes
    • Graph words: separate falling branches
    Like

    Walk down a road between two closed gates; every move right within this stretch puts you lower.

    See it
    (π/4, 1)(π/2, 0)(3π/4, −1)π/2π−4−224
    With x in radians, the branch falls through the three marked points between 0 and π.

    The same idea, other ways

    As a falling road

    Begin immediately right of 0, where the branch is high and positive. Move right through the point of height 1, cross the horizontal axis at π2, and continue through height −1. The curve stays continuous inside the interval and drops without bound near π from the left.

    10−1π/2π−4−224
    The radian branch travels from positive heights through zero to negative heights.
    As a unit-circle ratio

    Cotangent is horizontal coordinate divided by vertical coordinate. At π2 the point is (0, 1), so the quotient is 0 ÷ 1 = 0. Tangent reverses that order and would divide 1 by 0. The two formulas do not have the same domain.

    x = cos θy = sin θcot(π/2) = 0 ÷ 1 = 0
    At π2 radians, cotangent divides the horizontal coordinate 0 by the vertical coordinate 1.
    As three columns

    The output under π4 is 1, the output under π2 is 0, and the output under 3π4 is −1. Read the highlighted columns from left to right: their heights fall. The graph extends beyond those three sample heights without a highest or lowest output, so its range is all real numbers.

    input x in radiansoutput cot xπ/41π/203π/4−1↓ evaluate: input given, read the output below it
    Increasing radian inputs on this branch give the three decreasing output heights.
    x in radianscot x
    0undefined
    π41
    π20
    3π4−1
    πundefined

    5 How

    1. Find where sin x = 0. This finds the inputs that make cotangent's denominator zero so those inputs can be excluded.
    2. For one branch, draw dashed lines at x = 0 and x = π. Plug the endpoints back into sine: sin 0 = 0 and sin π = 0.
    3. Read the three table columns to plot (π4, 1), (π2, 0), and (3π4, −1).
    4. Draw one smooth falling branch through the points. Near 0 from the right it rises without bound; near π from the left it falls without bound.
    5. Copy the branch every π units left or right. Keep each copied branch separate at x = nπ.

    Sketch cotangent from sine zeros and a falling branch

    1
    Is sin x = 0 at the requested input?
    YesThe cotangent output is undefined; use the input as a vertical asymptote.
    NoUse cosine divided by sine to evaluate the accepted input.
    ↓
    2
    Is tangent undefined at this input?
    YesStill use cosine divided by sine. Cotangent can be defined even when tangent is undefined.
    NoThe quotient formula remains valid; do not replace its domain check.
    ↓
    3
    Does the question ask for more than the branch on (0, π)?
    YesCopy the falling branch every π and retain separate asymptotes.
    NoDraw only the continuous branch between 0 and π.
    1. Locate and check the sine zeros to draw boundary lines at consecutive multiples of π.
    2. Mark the zero halfway between the boundaries.
    3. Mark height 1 one quarter-period after the left boundary and height −1 one quarter-period before the right boundary.
    4. Draw the falling continuous branch, then copy it every π.

    6 Worked example

    Worked example

    The cotangent branch between π and 2π

    Graph the branch of y = cot x that passes through the point (3π2, 0), then extend the graph using the period. The three-column table gives exact values on this branch: cot(4π3) = 33, cot(3π2) = 0 and cot(5π3) = −33. The table lists each input as a count of sixths of π, so 8, 9 and 10 stand for 8π6, 9π6 and 10π6. It rounds the outputs to two decimal places: 0.58, 0 and −0.58.

    Show the steps and the answer
    input x (sixths of π)output cot x (to 2 decimal places)80.589010−0.58↓ evaluate: input given, read the output below it
    Table of y = cot x on the branch between π and 2π.
    1. Solve sinx=0. Sine is zero at x= …, −π, 0, π,2π,3π, …, which is x=nπ for every integer n. Exclude these inputs, so the domain of y=cotx is x≠nπ.cot x = cosxsinx has sin x in the denominator, and division by 0 is undefined. At x = nπ the numerator cos x is 1 or −1, not 0. So the size of the quotient grows without bound near x = nπ, which makes each line x = nπ a vertical asymptote.
    2. Since π<3π2<2π, the branch through (3π2,0) lies between π and 2π, two neighboring zeros of sine. Draw dashed vertical lines at x=π and x=2π. Plug the endpoints back into sine: sinπ=0 and sin2π=0.A cotangent branch runs from one asymptote to the next. No multiple of π lies strictly between π and 2π, so the curve is unbroken there. Checking sine at both endpoints confirms that the dashed lines sit exactly where the denominator is zero.
    3. Read the three table columns. Convert each input: 8π6=4π3,9π6=3π2 and 10π6=5π3. Pair them with the exact outputs 33, 0 and −33, which the table shows as 0.58, 0 and −0.58. Plot (4π3,33),(3π2,0) and (5π3,−33).The table counts sixths of π so that every input is a whole number. Dividing a count by 6 and simplifying turns it back into an angle. All three inputs lie between π and 2π. The zero sits exactly halfway between the asymptotes, because (π + 2π) ÷ 2 = 3π2.
    4. Draw one smooth curve through the three points that falls from left to right. On the right side of x=π the curve rises without bound along the dashed line. On the left side of x=2π it falls without bound.On the interval (π, 2π), sin x is negative. Just right of π, cos x is near −1 and sin x is a tiny negative number, so cosxsinx is a large positive number. Just left of 2π, cos x is near 1 and sin x is a tiny negative number, so the quotient is a large negative number. The table agrees: as x increases, the outputs go 33, then 0, then −33.
    5. Copy the branch every π units. Moving the three points π to the left gives (π3,33),(π2,0) and (2π3,−33) between x=0 and x=π. Moving them π to the right gives (7π3,33),(5π2,0) and (8π3,−33) between x=2π and x=3π. Draw a dashed asymptote at every x=nπ and keep each copy separate there.Cotangent has period π, so cot(x + π) = cot x. Every branch is therefore the same falling curve shifted by a multiple of π. The function is undefined at each x = nπ, so no copy is joined to its neighbor across an asymptote.
    Answer
    The branch lies between the dashed asymptotes x = π and x = 2π. It passes through (4π3, 33), (3π2, 0) and (5π3, −33) and falls from left to right. It rises without bound as x approaches π from the right and falls without bound as x approaches 2π from the left. The full graph repeats this branch between x = nπ and x = (n + 1)π for every integer n, with a dashed asymptote at each x = nπ.
    Double-check Compute the table values from cot x = cosxsinx. First, cos(4π3) = −12 and sin(4π3) = −32, so cot(4π3) = (−12) ÷ (−32) = 13 = 33 ≈ 0.58. Next, cos(3π2) = 0 and sin(3π2) = −1, so cot(3π2) = 0. Last, cos(5π3) = 12 and sin(5π3) = −32, so cot(5π3) = −33 ≈ −0.58. The left copy also agrees with the rule's branch on (0, π). The point (π3, 33) falls between (π4, 1) and (π2, 0), and (2π3, −33) falls between (π2, 0) and (3π4, −1).

    Work to write

    1. sin x = 0 at x = nπ, so cot x is undefined there: x ≠ nπ
    2. Asymptotes x = π and x = 2π; sin π = 0 and sin 2π = 0
    3. 8π6=4π3,9π6=3π2,10π6=5π3
    4. Plot (4π3, 33), (3π2, 0), (5π3, −33)
    5. Falling branch: rises without bound just right of x = π, falls without bound just left of x = 2π
    6. Period π: copy the branch between each x = nπ and x = (n + 1)π, kept separate at x = nπ

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 4

    Evaluate the midpoint zero

    Find cot(π2). This asks for the output at the accepted input π2, so use cotangent's own denominator rather than tangent's domain.

    Show the steps and the answer
    x = cos θy = sin θcos = 0, sin = 1
    The point at π2 radians verifies cotangent's allowed zero output.
    1. Read cos(π2)=0 and sin(π2)=1 from the unit-circle point (0, 1).The first coordinate is cosine, and the second is sine.
    2. Check that the denominator 1 is nonzero, then calculate 01=0.Division is allowed when the denominator is nonzero, including when the numerator is 0.
    Answer
    cot(π2) = 0.
    Double-check The unit-circle point on the vertical ray at π2 has horizontal coordinate 0 and positive vertical coordinate 1. Their cotangent ratio is therefore 0.

    Rung 2 of 4

    Draw the positive half of the branch

    Sketch cotangent for 0 < x ≤ π2, including its point at π4. This asks for the positive half of a branch and the midpoint zero, while excluding 0.

    Show the steps and the answer
    input x in radiansoutput cot x0undefinedπ/41π/20↓ evaluate: input given, read the output below it
    The radian input 0 is excluded, while the highlighted columns provide two allowed points.
    (π/4, 1)(π/2, 0)π/21234
    The positive half-branch falls from the asymptote to its included zero at π2 radians.
    1. Exclude 0 because sin0=0; draw the dashed line x=0.Substitution finds and verifies the zero denominator at the left boundary.
    2. At π4, divide 22 by itself to get 1, then plot (π4,1).Equal nonzero cosine and sine values give the quotient 1.
    3. Include (π2,0) and draw a falling curve toward it from high positive heights near 0.The denominator is positive inside this half-interval, and the quotient decreases toward its allowed zero.
    Answer
    • Excluded boundary: x = 0.
    • Points: (π4, 1), (π2, 0).
    • Shape: positive and falling on (0, π2), with the zero at π2 included.
    Double-check Quadrant I has positive sine and cosine, so cotangent must stay positive before π2; the axis point at π2 supplies the included zero.

    Rung 3 of 4

    Complete the falling branch

    Complete the cotangent sketch on (0, π). This asks you to add the negative half and explain why π, like 0, is excluded.

    Show the steps and the answer
    input x in radiansoutput cot xπ/41π/203π/4−1↓ evaluate: input given, read the output below it
    The last highlighted radian column supplies the point that completes the branch.
    10−1π/2π−4−224
    The complete radian branch falls through all three points toward its right asymptote.
    1. At 3π4, divide −22 by 22 to get −1.Cosine is negative and sine positive, with equal nonzero magnitudes.
    2. Plot (3π4,−1) after the midpoint zero and continue the smooth falling curve.The output row falls from 1 to 0 to −1 as the radian inputs increase.
    3. Check sinπ=0 and draw x=π as the right vertical asymptote.This denominator check excludes the endpoint rather than assigning it a value.
    4. Extend the curve negatively without bound near π from the left.Cosine is near −1 while sine is tiny and positive, so their quotient is very negative.
    Answer
    • Points: (π4, 1), (π2, 0), (3π4, −1).
    • Boundary lines: x = 0, x = π.
    • Shape: one continuous falling branch with unbounded ends.
    Double-check In quadrant II cosine is negative and sine positive, so the added half must be negative. That independent sign check agrees with the point at 3π4 and the downward right end.

    Rung 4 of 4

    Repeat left and check origin symmetry

    Sketch the cotangent branch on (−π, 0) and check its points using odd symmetry. This asks you to copy the known branch one period left, then verify it by a half-turn about the origin.

    Show the steps and the answer
    input x in radiansoutput cot x−3π/41−π/20−π/4−1↓ evaluate: input given, read the output below it
    The negative radian inputs retain the falling output pattern 1, 0, −1.
    (−3π/4, 1)(−π/2, 0)(−π/4, −1)(π/4, 1)(3π/4, −1)−π−π/2π/2π−4−224
    The radian branches repeat by π and pair under a half-turn about the origin.
    1. Subtract π from the boundaries 0 and π to get −π and 0.Period π preserves the branch's output pattern one π unit left.
    2. Subtract π=4π4 from the key inputs: π4−π=−3π4,π2−π=−π2, and 3π4−π=−π4.Common denominators let you subtract the π fractions exactly.
    3. Keep the corresponding outputs 1, 0, and −1, and draw one falling branch.The copied input columns retain the original output row.
    4. Check sin(−π)=0 and sin0=0, so both new boundary inputs remain excluded.Plugging the boundaries into cotangent's denominator confirms the two vertical asymptotes.
    5. Rotate (π4,1) to (−π4,−1), and (3π4,−1) to (−3π4,1).Odd symmetry changes the signs of both coordinates and checks the copied points a second way.
    Answer
    • Interval: (−π, 0).
    • Boundary lines: x = −π, x = 0.
    • Points: (−3π4, 1), (−π2, 0), (−π4, −1).
    • Shape: a continuous falling branch, matching origin symmetry.
    Double-check Use the quotient directly at −π4: cosine is positive and sine negative with equal magnitudes, so cotangent is −1. At −3π4, both cosine and sine are −22, so their quotient is 1, agreeing with the copied and rotated points.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: cot(π2) is undefined because tan(π2) is undefined.
    Cotangent's quotient has sine in the denominator, and sine at π2 equals 1. The expression 1 divided by tangent is unavailable when tangent itself is undefined.
    ✓ Instead: Use cosine divided by sine: cot(π2) = 01 = 0. The reciprocal identity cot x = 1tanx requires both sides to be defined.
    ✗ Not this: Counterexample: draw a rising cotangent branch through (π4, 1), (π2, 0), and (3π4, −1).
    Those outputs decrease from 1 to 0 to −1 as the inputs increase. A rising curve contradicts its own plotted points.
    ✓ Instead: Draw a falling branch between consecutive multiples of π.

    Tips and tricks

    • cotangent falls, and its zero is midway between consecutive multiples of π.
    • use cotangent's own quotient cos x divided by sin x when checking whether an input is allowed.
    • the whole branch reaches every real output, so cotangent has no highest or lowest height and no amplitude.

    7 The trap

    Using cot x = 1 divided by tan x at an input where tangent is undefined. Cotangent's reliable definition is cos x divided by sin x; at π2 that gives the valid output 0.

    Keep in mind

    • Cotangent's walls are sine's zeros, x = nπ, not cosine's: cot x is fine at π2, where it equals 0.
    • Do not compute cot x as 1 ÷ tan x where tan x is undefined; cosxsinx gives cot π2 = 01 = 0 directly.
    • Near the left wall the heights are huge and positive, near the right wall huge and negative: cot 0.1 ≈ 9.97 and cot 3 ≈ −7.02.

    Memory hook

    Tangent climbs, cotangent slides: tan rises between its walls, while cot falls between walls at 0, π, 2π, crossing zero halfway.

    Flash cards

    Say the answer out loud, then flip.

    Where are cotangent's vertical asymptotes?
    x = nπ, where sin x = 0.
    Does a cotangent branch rise or fall from left to right?
    It falls: cotangent is decreasing on each branch.
    Is cot 2.8 positive or negative?
    Negative: 2.8 is between π2 ≈ 1.57 and π ≈ 3.14, where cosine is negative and sine positive.
    cot 7π4 = ?
    −1: 7π4 − π = 3π4, and the branch passes (3π4, −1).
    True or false: cot 5π2 is undefined because tan 5π2 is.
    False: sin 5π2 = 1, not 0, so cot 5π2 = 01 = 0.