Quarry School

Tangent and the meaning of a vertical asymptote

Subject: MathematicsLeans on: Coordinates and plottingLeans on: Radian fractions and common denominatorsLeans on: Integer multiplesLeans on: Unit-circle valuesLeans on: Fraction division and signsLeans on: Zero numerator and zero denominatorLeans on: Inequalities and interval endpointsLeans on: Substitution checksLeans on: Quadrant signs
Level 2 · BuildingAbout 29 min read17 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Imagine walking along a ramp that climbs beside a tall fence.

    Rule

    Rule: tan x = sinxcosx, with x ≠ π2 + nπ for every integer n. The vertical asymptotes are x = π2 + nπ.
    Each branch is continuous and increasing; the central branch is on (−π2, π2) and the pattern repeats every π.

    Step

    1. 1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.

    2. 2. For the central branch, use x = −π2 and x = π2. Check cos(−π2) = 0 and cos(π2) = 0 before drawing the dashed vertical lines.

    3. 3. Plot (−π4, −1), (0, 0), and (π4, 1), using the exact unit-circle values in the worked example's three-column table.

    4. 4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.

    5. 5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.

    Rule

    Rule: a vertical asymptote x = c has unbounded nearby output behavior on at least one side. For these parent trigonometric functions, the denominator is zero at c and the input c is excluded.

    Question

    Explain tangent at π2, at 1.56, and at 1.58 radians. This asks you to separate the excluded input from accepted inputs on either side of it.

    Answer

    tan(π2) is undefined.
    tan(1.56) ≈ 92.6205, on the left.
    tan(1.58) ≈ −108.6492, on the right.

    Rule

    Rule: on −π2 < x < π2, tangent is continuous and increasing, with key points (−π4, −1), (0, 0), and (π4, 1).

    Rule

    Rule: tan(x + π) = tan x whenever tangent is defined. Copy the central branch by integer multiples of π; the boundary lines become x = π2 + nπ.

    Strategy

    1. Find and check the zeros of cosine to locate excluded inputs.

    2. Draw two consecutive boundary lines and mark the zero halfway between them.

    3. Use quarter-π offsets from that zero to place heights −1 and 1.

    4. Draw one continuous rising branch, then repeat it every π.

    Trap

    Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.

    Term

    Tangent

    Definition

    Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.

    Term

    Sine

    Definition

    The vertical coordinate of the unit-circle point for an angle.

    Term

    Cosine

    Definition

    The horizontal coordinate of the unit-circle point for an angle.

    Term

    Unit circle

    Definition

    A circle of radius 1 centered at the origin. Its points have coordinates (cos x, sin x).

    Term

    Radian

    Definition

    An angle unit based on arc length divided by radius. A half-turn is π radians, equal to 180°.

    Term

    Integer

    Definition

    A whole count, including positive counts, negative counts and zero.

    Term

    Multiple

    Definition

    A number obtained by multiplying a given number by an integer.

    Term

    Domain

    Definition

    The set of inputs for which a function has an output.

    Term

    Real number

    Definition

    A number on the ordinary number line, including integers, fractions and square roots of nonnegative numbers.

    Term

    Undefined

    Definition

    No output exists at that input. Here the formula would divide by zero.

    Term

    Numerator

    Definition

    The top of a fraction, the amount being divided.

    Term

    Denominator

    Definition

    The bottom of a fraction, the number you divide by. It must be nonzero.

    Term

    Zero

    Definition

    For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.

    Term

    x-intercept

    Definition

    A graph point on the horizontal axis, where the output is zero.

    Term

    y-intercept

    Definition

    A graph point on the vertical axis, where the input is zero.

    Term

    Vertical asymptote

    Definition

    A vertical line approached by inputs whose output magnitudes become unbounded from at least one side.

    Term

    Not continuous (discontinuous)

    Definition

    A graph with a break. These four full graphs have breaks at excluded angles, while each branch is continuous.

    Term

    Continuous

    Definition

    Having no break within an allowed interval. Each branch here is continuous even though excluded inputs separate branches.

    Term

    Branch

    Definition

    One connected piece of a graph. Here consecutive asymptotes bound each branch.

    Term

    Unbounded

    Definition

    Having no finite ceiling or floor in the specified direction. Outputs eventually pass any proposed bound.

    Term

    Infinity

    Definition

    A symbol describing unlimited continuation, not a real output or an included endpoint.

    Term

    Period

    Definition

    A positive horizontal input distance after which the whole pattern repeats.

    Term

    Symmetry

    Definition

    A picture matches itself after a specified reflection or rotation.

    Term

    Origin

    Definition

    The crossing of the axes, with coordinates (0, 0).

    Term

    Increasing

    Definition

    Within an interval, a larger input gives a larger output.

    Term

    One-sided approach

    Definition

    Moving toward an input while keeping every nearby input entirely on its left or entirely on its right.

    Term

    Coordinate

    Definition

    One number in a point's address, recording a horizontal or vertical position.

    Term

    Magnitude

    Definition

    A number's distance from zero, ignoring its sign.

    Term

    Ratio

    Definition

    One number compared with another by division, with a nonzero divisor.

    Term

    Ray

    Definition

    A line that starts at one point and extends without end in one direction.

    Term

    Quadrant

    Definition

    One of the four regions between the coordinate axes, numbered counterclockwise from upper right.

    1 In plain words

    Imagine walking along a ramp that climbs beside a tall fence. You can move closer to the fence while your height becomes greater than any height you name. The fence marks an input to watch, not a height you reach. A vertical asymptote works that way: nearby outputs grow without bound on at least one side of a vertical line. Unbounded means the outputs pass every fixed ceiling or every fixed floor. Tangent has separate pieces called branches. Each branch is continuous, with no break inside it, and rises as you move right. Its excluded boundary inputs separate those pieces.

    Explain it like I am five

    Picture cutting 1 pizza into slices: slices of 0.1 pizza make 1 ÷ 0.1 = 10 slices, slices of 0.01 make 100. Tiny divisors give huge answers, and dividing by exactly 0 gives no answer.

    Tangent is tan x = sinxcosx. As x creeps up toward π2 ≈ 1.5708 (≈ means about), sin x nears 1 while cos x shrinks toward 0. A calculator in radians shows it: tan 1.5 ≈ 14.10, tan 1.55 ≈ 48.08, tan 1.57 ≈ 1255.77. The heights pass any ceiling you name, so they are unbounded. Right after π2, cos x is tiny and negative, so the heights are hugely negative. At x = π2 itself cos x = 0, and there is no height at all.

    So the dashed line x = π2 is a vertical asymptote: a vertical line the graph hugs while its heights grow without bound, with no point on it. Tangent has one wherever cos x = 0, at x = π2 + nπ, and each piece between two of them, a branch, rises from left to right.

    2 Picture it

    input x in radiansoutput tan x, rounded1.45.79791.514.10141.5548.07851.5692.62051.571255.7656↓ evaluate: input given, read the output below it
    These original inputs in radians approach π2 ≈ 1.570796 from the left.

    Reminder

    Reminder: Coordinates and plotting, Radian fractions and common denominators, Integer multiples, Unit-circle values, Fraction division and signs, Zero numerator and zero denominator, Inequalities and interval endpoints, Substitution checks, Quadrant signs
    • Coordinates and plotting. An ordered pair is (input, output): tan(π4) = 1 gives (π4, 1), with the horizontal coordinate first.
    • Radian fractions and common denominators. To copy a point by π, use π = 4π4: −π4 + π = 3π4.
    • Integer multiples. An integer can be negative, zero, or positive: n = −1 in π2 + nπ gives −π2.
    • Unit-circle values. The circle point lists (cos x, sin x): at π2 it is (0, 1), so tangent divides 1 by 0.
    • Fraction division and signs. Equal nonzero numbers divide to 1; a negative divided by a positive is negative: −22 ÷ 22 = −1.
    • Zero numerator and zero denominator. 01 = 0 is allowed; 10 is undefined because no real number multiplied by 0 gives 1.
    • Inequalities and interval endpoints. (−π2, π2) means −π2 < x < π2, with both endpoints excluded.
    • Substitution checks. After finding a forbidden input, plug it back into the denominator: cos(π2) = 0 verifies the exclusion.
    • Quadrant signs. Quadrant I is upper right, with positive sine and cosine. Quadrant II is upper left, with positive sine and negative cosine.

    3 Why

    On the unit circle, tan x is the vertical coordinate divided by the horizontal coordinate. Near π2 from the left, sine approaches 1 while positive cosine shrinks toward 0. Dividing a number near 1 by a very small positive number makes a very large positive output. From the right, cosine is small and negative, so the output is very negative. At π2 itself the denominator is zero, so there is no output. Infinity describes unbounded behavior; it is not a value of tangent.

    4 The rule

    tanx=sinxcosx, with x≠π2+nπ for every integer n.

    The vertical asymptotes are x=π2+nπ.Each branch is continuous and increasing; the central branch is on (−π2,π2) and the pattern repeats every π.

    The same idea, five ways

    Say it

    a vertical asymptote is a vertical line near which the outputs become unbounded on at least one side.

    Write it

    x = π2 is a vertical asymptote of tangent because its nearby outputs become arbitrarily large in magnitude.

    In math
    • x=π2
    • x < π2, x approaches π2: tan x grows without bound
    • x > π2, x approaches π2: tan x becomes negative without bound
    • tan(π2) is undefined
    • ∞ is not a real output
    Like

    You can approach a fence while climbing beyond every height you name; the fence is an input boundary, not the top of the ramp.

    See it
    (0, 0)(π/4, 1)(−π/4, −1)−π/2π/2−6−4−2246
    The x-coordinates are in radians.

    The same idea, other ways

    As a graph

    A vertical asymptote is a vertical line, not a point with an output. The rising central branch runs between x = −π2 and x = π2. It leaves any fixed drawing window near either end, so the edge of the picture is not an endpoint of the function.

    −π/2π/2−4−224
    In radians, the central branch leaves the visible window as it approaches its two boundary lines.
    As smaller portions

    One whole divided into tenths gives 10 portions. Divided into hundredths it gives 100 portions. Tangent near π2 behaves similarly because its numerator stays near 1 while its positive denominator becomes tiny. No calculation ever divides by zero or produces an actual infinity.

    1 ÷ 0.1 = 10

    1 ÷ 0.01 = 100

    1 ÷ 0.001 = 1000

    Division by 0 is undefined

    With nearby inputs

    Read the column under 1.4: its output is about 5.7979. The column under 1.57 has output about 1255.7656. Both inputs are less than π2 ≈ 1.570796. They show the approach from the left. Each output is rounded to four decimal places; the table illustrates growth near the boundary, while the shrinking-denominator argument explains why it continues without bound.

    input x in radiansoutput tan x, rounded1.45.79791.514.10141.5548.07851.5692.62051.571255.7656↓ evaluate: input given, read the output below it
    Compare the highlighted columns in this original table of radian inputs.
    As a turning ray

    In the central interval, the unit-circle point is on the right half of the circle. The ray from the origin turns from almost straight down to horizontal to almost straight up. Its vertical coordinate divided by its positive horizontal coordinate is tangent. That ratio increases throughout the interval, matching the rising graph.

    x = cos θy = sin θtan(π/4) = y ÷ x = 1
    At π4 radians, equal positive vertical and horizontal coordinates give tangent 1.
    x in radianstan x, rounded to four decimal places
    1.45.7979
    1.514.1014
    1.5548.0785
    1.5692.6205
    1.571255.7656

    Part 1: Vertical asymptote: nearby outputs become unbounded

    A one-sided approach means moving toward an input while staying entirely on its left or entirely on its right. You can approach a doorway from either side without standing in the doorway. Near a vertical asymptote, watch the outputs along that approach. For tangent at π2, the left-side outputs grow positively without bound and the right-side outputs grow negatively without bound. That statement concerns nearby accepted inputs. It does not give tangent an output at π2.

    • One-sided approach: stay on one specified side of the input.
    • At π2: tangent grows positively without bound from the left and negatively without bound from the right.
    • Infinity: a description of unbounded growth, not a real output.
    • Not continuous (discontinuous): the complete tangent picture has breaks at its excluded inputs.
    • Continuous: within each branch, the tangent curve has no break.
    π/2−12−8−44812
    The vertical line is at π2 radians; neither neighboring piece gives an output on that line.

    The same idea, five ways

    Say it

    approach π2 from the left means use smaller and smaller gaps below π2; from the right means use gaps above it.

    Write it

    tangent has opposite unbounded behavior on the two sides of π2, and it has no value at π2.

    In math
    • x<π2
    • x>π2
    • x≠π2
    • tan(π2) is undefined
    • Graph words: unbounded above from the left, unbounded below from the right
    Like

    Approach a doorway along the hall from its left side or its right side; the direction of approach matters.

    See it
    π/2−12−8−44812
    Around π2 radians, the left piece rises out of the window while the right piece falls out of it.

    Worked example

    A zero denominator and nearby finite values

    Explain tangent at π2, at 1.56, and at 1.58 radians. This asks you to separate the excluded input from accepted inputs on either side of it.

    Show the steps and the answer
    input x in radiansoutput tan x1.56≈ 92.6205π/2undefined1.58≈ −108.6492↓ evaluate: input given, read the output below it
    The middle column is excluded; the nearby radian inputs have finite outputs with opposite signs.
    1. At x=π2, write tanx=10.The unit-circle values are sin(π2) = 1 and cos(π2) = 0; this substitution checks the excluded input.
    2. Reject 10 as undefined.No real output multiplied by 0 gives 1.
    3. Since 1.56 < 1.570796 < 1.58, classify 1.56 as left-side and 1.58 as right-side.π2 is approximately 1.570796 radians, so the inequalities identify the direction of each approach.
    4. Read the two columns: tan(1.56)≈92.6205 and tan(1.58)≈−108.6492.Both denominators are nonzero, so both accepted inputs have finite outputs; these outputs are rounded to four decimal places.
    Answer
    • tan(π2) is undefined.
    • tan(1.56) ≈ 92.6205, on the left.
    • tan(1.58) ≈ −108.6492, on the right.
    Double-check The supplied coordinate approximations provide a numerical cross-check: at 1.56, sine ≈ 0.9999417202 and cosine ≈ 0.0107961171 give ≈ 92.6205. At 1.58, sine ≈ 0.9999576465 and cosine ≈ −0.0092035433 give ≈ −108.6492. These coordinates are rounded to ten decimal places and supplied for illustration. Your independent circle check is the sign: sine is positive on both sides, cosine is positive on the left and negative on the right. At π2, the exact cosine is 0, so that input is still excluded.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: tan(π2) = ∞.
    Infinity is not a real output, and the quotient at this exact input divides by zero.
    ✓ Instead: tan(π2) is undefined; nearby left-side outputs grow without bound.

    Tips and tricks

    • write the side of the approach before deciding whether outputs grow positively or negatively.

    Part 2: One tangent branch: three points and two boundary lines

    A branch is one connected piece of the graph. Think of one stretch of a road between two closed gates. You may travel inside that stretch without jumping a gap. That is what continuous means here. Increasing means that moving to a larger input within this branch gives a larger output. The central tangent branch starts below every fixed height near its left gate, passes through the origin, and climbs above every fixed height near its right gate. The gates are the excluded inputs −π2 and π2.

    • Branch: one continuous piece between consecutive vertical asymptotes.
    • Increasing: larger inputs within the same branch give larger outputs.
    • Central interval: (−π2, π2), with both endpoints excluded.
    • The central tangent branch passes through the origin, so (0, 0) is both an x-intercept and a y-intercept.
    (−π/4, −1)(0, 0)(π/4, 1)−π/2π/2−4−224
    On the central radian interval, the graph rises smoothly through the three points.

    The same idea, five ways

    Say it

    one branch is one unbroken piece; increasing means farther right gives higher outputs on that piece.

    Write it

    the central tangent branch rises continuously between its two excluded boundary inputs.

    In math
    • −π2<x<π2
    • (−π2,π2)
    • {x|−π2<x<π2}
    • If −π2 < x1 < x2 < π2, then tan x1 < tan x2.
    • Graph words: one rising branch through the origin
    Like

    Follow one climbing road between two closed gates without jumping any gap inside the road.

    See it
    (−π/4, −1)(0, 0)(π/4, 1)−π/2π/2−4−224
    The x-coordinates are radians; the three marked points guide a single continuous rising branch.

    Worked example

    The tangent branch through (−π, 0)

    Graph the branch of y = tan x that passes through the point (−π, 0). The three-column table gives exact values on this branch: tan(−4π3) = −3, tan(−π) = 0 and tan(−2π3) = 3. The table lists each input as a count of thirds of π, so −4, −3 and −2 stand for −4π3, −π and −2π3. It shows 3 rounded to 1.732. Find and check the two boundary lines of this branch, plot the three points and draw the branch. Then copy the branch π units right and π units left.

    Show the steps and the answer
    input x (thirds of π)output tan x−4−1.732−30−21.732↓ evaluate: input given, read the output below it
    Three points on the branch of y = tan x through (−π, 0).
    1. Solve cosx=0: x=π2+nπ. The solutions just on either side of −π come from n=−2, giving x=π2−2π=−3π2, and n=−1, giving x=π2−π=−π2. Since −3π2<−π<−π2 and the two are exactly π apart, no other excluded input lies between them. So this branch lives on −3π2<x<−π2.tan x = sinxcosx, so every input with cos x = 0 makes the denominator zero and must be excluded. Two neighboring excluded inputs are the boundary lines of one branch.
    2. Check both boundary inputs on the unit circle. −3π2 is coterminal with −3π2+2π=π2, the point (0, 1), so cos(−3π2)=0 and sin(−3π2)=1. −π2 is the point (0,−1), so cos(−π2)=0 and sin(−π2)=−1. Now draw the dashed vertical lines x=−3π2 and x=−π2.A boundary line is drawn only after the denominator is confirmed to be zero there. At each line the numerator is 1 or −1, not 0. So next to each line, tan x is a nonzero number divided by a number close to zero. There is no value on the line itself, and the values beside it grow without bound.
    3. Confirm the table values as sinx÷cosx. −4π3 is coterminal with 2π3, the point (−12,32), so tan(−4π3)=32÷(−12)=−3. −π is the point (−1,0), so tan(−π)=0÷(−1)=0. −2π3 is coterminal with 4π3, the point (−12,−32), so tan(−2π3)=(−32)÷(−12)=3. Plot (−4π3,−3),(−π,0) and (−2π3,3), placing 3 at about 1.732.Exact unit-circle values give the correct heights. The table's −4, −3 and −2 are thirds of π, so they are exactly these three inputs. All three inputs lie strictly between the boundary lines, so they belong to this branch: −3π2 = −9π6 < −8π6 = −4π3, and −2π3 = −4π6 < −3π6 = −π2.
    4. Draw one smooth rising curve through the three points, kept between the dashed lines. As x approaches −3π2 from the right, the curve drops without bound. As x approaches −π2 from the left, it rises without bound. It never touches either line.Each branch is continuous and increasing. On −3π2 < x < −π2, the matching unit-circle points lie on the left half of the circle, so cos x is negative there. Near x = −3π2, tan x is about 1 divided by a tiny negative number, which is a large negative value. Near x = −π2, it is about −1 divided by a tiny negative number, which is a large positive value.
    5. Add π to every input for the right copy and subtract π for the left copy. Right copy: dashed lines x=−π2 and x=π2, points (−π3,−3), (0, 0) and (π3,3). Left copy: dashed lines x=−5π2 and x=−3π2, points (−7π3,−3),(−2π,0) and (−5π3,3). Draw each copy as its own rising branch between its two lines.The tangent pattern repeats every π. A point moved π units left or right is still on the graph at the same height, and each boundary line x = π2 + nπ moves onto the next one. Neighboring branches share the lines x = −3π2 and x = −π2. Those inputs are excluded, so the branches stay separate and no curve crosses a dashed line.
    Answer
    The boundary lines (vertical asymptotes) are x = −3π2 and x = −π2. The branch is the continuous increasing curve on −3π2 < x < −π2 through (−4π3, −3), (−π, 0) and (−2π3, 3). It falls without bound as x approaches −3π2 from the right and rises without bound as x approaches −π2 from the left. Copied π units right, it is the branch on −π2 < x < π2 through (−π3, −3), (0, 0) and (π3, 3). Copied π units left, it is the branch on −5π2 < x < −3π2 through (−7π3, −3), (−2π, 0) and (−5π3, 3).
    Double-check Recompute two copied points directly. tan(π3) = 32 ÷ 12 = 3, the same height as at −2π3. tan(−π3) = (−32) ÷ 12 = −3, the same height as at −4π3. The zero sits halfway between the boundary lines: (−3π2 − π2) ÷ 2 = −2π ÷ 2 = −π. In decimals, −3π2 ≈ −4.712 < −4π3 ≈ −4.189 < −π ≈ −3.142 < −2π3 ≈ −2.094 < −π2 ≈ −1.571. The heights −1.732, 0 and 1.732 increase in the same order, so all three points are inside the branch and the curve rises. Finally, cos(−4π3) = cos(−2π3) = −12 ≠ 0, so no plotted input is an excluded one.

    Work to write

    1. cos x = 0 when x = π2 + nπ; on either side of −π this gives x = −3π2 (n = −2) and x = −π2 (n = −1).
    2. cos(−3π2) = 0 and cos(−π2) = 0, so x = −3π2 and x = −π2 are the dashed boundary lines (vertical asymptotes).
    3. tan(−4π3)=32÷(−12)=−3,tan(−π)=0÷(−1)=0,tan(−2π3)=(−32)÷(−12)=3.
    4. Points plotted: (−4π3, −3), (−π, 0), (−2π3, 3).
    5. One increasing branch on −3π2 < x < −π2: it falls without bound toward x = −3π2 and rises without bound toward x = −π2, never touching either line.
    6. Copies: π right on −π2 < x < π2 through (0, 0); π left on −5π2 < x < −3π2 through (−2π, 0); each copy has its own boundary lines.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: connect the central branch to the next branch across x = π2.
    At π2 there is no tangent output, and the neighboring branches have opposite unbounded behavior near that line.
    ✓ Instead: Keep the branches separate; draw a dashed vertical asymptote at x = π2.

    Tips and tricks

    • place the zero between the two boundary lines before drawing the curve.

    Part 3: Complete tangent graph: repeat by π

    Think of wallpaper made from one repeated panel. Once you draw one panel correctly, you can place identical panels beside it. Tangent works the same way: its period is π, so an input moved π units left or right keeps the same output. The copying refers to pieces of the parent graph, not to making a new function. Every copied branch still rises. Between neighboring branches, the excluded input gives a vertical asymptote. The complete graph is not continuous across those excluded inputs, even though every individual branch is continuous.

    • Period: π.
    • Zeros: x = nπ, because sine is 0 and cosine is 1 or −1 there.
    • Vertical asymptotes: x = π2 + nπ, because cosine is 0 there.
    • Here n is an integer, including negative integers and 0.
    −ππ−4−224
    The radian graph repeats rising branches and excludes every dashed vertical line.

    The same idea, five ways

    Say it

    move one branch π units sideways and its heights repeat.

    Write it

    the complete tangent graph repeats each continuous rising branch every π radians.

    In math
    • tan(x + π) = tan x
    • tan(x + nπ) = tan x, n an integer
    • x = π2 + nπ: vertical asymptotes
    • x = nπ: zeros
    • Graph words: repeated rising branches
    Like

    Identical wallpaper panels repeat at a fixed spacing, with a seam between panels.

    See it
    −ππ−4−224
    With the horizontal axis in radians, consecutive rising branches repeat π units apart.

    Worked example

    The next tangent branch to the right

    Sketch the tangent branch on (π2, 3π2). This asks you to copy the central branch one period to the right while keeping all its heights.

    Show the steps and the answer
    input x in radiansoutput tan x3π/4−1π05π/41↓ evaluate: input given, read the output below it
    These copied radian inputs keep the central branch's three output heights.
    (3π/4, −1)(π, 0)(5π/4, 1)π/2π3π/2−4−224
    The branch is a copy π radians to the right of the central branch.
    1. Move the left boundary from −π2 to −π2+π=π2, and the right boundary to π2+π=3π2.A period of π moves every input π units right without changing its output behavior.
    2. Add π=4π4 to −π4, 0, and π4, giving 3π4,π, and 5π4.Fractions with the same denominator add by their numerators; the copied inputs remain in the same left-to-right order.
    3. Keep the outputs −1, 0, and 1, then draw a rising branch through the corresponding table columns.Tangent's period preserves each output, and the copied branch has the same shape.
    4. Check both boundaries in cosine: cos(π2)=0 and cos(3π2)=0.Substitution verifies that the copied boundary inputs still make the original denominator zero and must be excluded.
    Answer
    • Interval: (π2, 3π2).
    • Boundary lines: x = π2, x = 3π2.
    • Points: (3π4, −1), (π, 0), (5π4, 1).
    • Shape: one continuous rising branch.
    Double-check Check the points directly on the unit circle: at 3π4 sine and cosine have equal magnitudes and opposite signs, giving −1; at π the numerator is 0 and the denominator is −1; at 5π4 both coordinates are equal and negative, giving 1.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: put tangent's vertical asymptotes at x = nπ.
    At those inputs cosine is 1 or −1, while sine is 0, so tangent has output 0.
    ✓ Instead: Put tangent's zeros at x = nπ and its vertical asymptotes at x = π2 + nπ.

    Tips and tricks

    • tangent's zero is halfway between consecutive asymptotes.

    5 How

    1. Find the boundary lines by asking where cos x = 0. This finds the inputs that make tangent's denominator zero, so those inputs must be excluded.
    2. For the central branch, use x = −π2 and x = π2. Check cos(−π2) = 0 and cos(π2) = 0 before drawing the dashed vertical lines.
    3. Plot (−π4, −1), (0, 0), and (π4, 1), using the exact unit-circle values in the worked example's three-column table.
    4. Draw one smooth rising branch through the points. Its left end drops without bound and its right end rises without bound as the inputs approach the boundary lines from inside the interval.
    5. Copy the same branch π units right and π units left. Keep every boundary line separate from the curve.

    Sketch tangent from its denominator, points, and period

    1
    Is cos x = 0 at the input?
    YesExclude the input and draw its vertical asymptote; the quotient is undefined there.
    NoThe input is accepted; evaluate sine divided by cosine.
    ↓
    2
    Does the question ask for only one branch?
    YesStay between the two specified consecutive asymptotes.
    NoCopy the branch by π to cover the requested interval.
    ↓
    3
    Does the question ask what happens near an asymptote?
    YesChoose the left or right side, then use the numerator and denominator signs.
    NoGive the exact accepted values or the sketch requested.
    1. Find and check the zeros of cosine to locate excluded inputs.
    2. Draw two consecutive boundary lines and mark the zero halfway between them.
    3. Use quarter-π offsets from that zero to place heights −1 and 1.
    4. Draw one continuous rising branch, then repeat it every π.

    6 Worked example

    Worked example

    The tangent branch through (π, 0) and its vertical asymptotes

    Graph the branch of y = tan x that passes through the point (π, 0). The three-column table gives exact values on this branch: tan(3π4) = −1, tan(π) = 0 and tan(5π4) = 1. The table lists the inputs as multiples of π, so 0.75, 1 and 1.25 stand for 3π4, π and 5π4. (a) Use cos x = 0 to find the two vertical asymptotes that bound this branch, and check that cos x = 0 at each one. (b) Confirm the three table values from the unit-circle values of sin x and cos x, then plot the three points. (c) Describe what the graph does as x approaches each asymptote from inside the branch, and explain why the graph never meets the line x = 3π2. (d) Copy the branch π units left and π units right, and list every vertical asymptote in the three-branch sketch.

    Show the steps and the answer
    input x (as a multiple of π)output tan x0.75−1101.251↓ evaluate: input given, read the output below it
    Three-column table for the branch of y = tan x through (π, 0).
    1. Solve cosx=0. On the unit circle, cos x is 0 only at the top point (0, 1) and the bottom point (0,−1), so x=π2+nπ for every integer n: …, −π2,π2,3π2,5π2, … The nearest of these on each side of π are x=π2 on the left and x=3π2 on the right.tan x = sinxcosx, so any input that makes the denominator cos x equal 0 has no tangent value and must be excluded. The branch through (π, 0) runs from the nearest excluded input on the left of π to the nearest excluded input on the right of π.
    2. Check both boundary inputs before drawing: cos(π2)=0 (with sin(π2)=1) and cos(3π2)=0 (with sin(3π2)=−1). Then draw dashed vertical lines x=π2 and x=3π2. They are 3π2−π2=π apart, which is the width of one branch.A dashed line belongs only where the denominator really is 0. Do not draw one where sin x = 0. At x = π, tan(π) = 0 ÷ (−1) = 0, so that input gives a point on the graph and does not give an asymptote.
    3. Confirm the table with exact unit-circle values. At 3π4: cosx=−22 and sinx=22, so tan(3π4)=22÷(−22)=−1. At π: cosx=−1 and sinx=0, so tan(π)=0÷(−1)=0. At 5π4: cosx=−22 and sinx=−22, so tan(5π4)=(−22)÷(−22)=1. Plot (3π4,−1),(π,0) and (5π4,1).Exact values give exact points. 3π4 is halfway between π2 and π, and 5π4 is halfway between π and 3π2. The three points therefore mark the center of the branch and one point on each side of it.
    4. Find the sign of tan x close to each line. Just right of π2 (Quadrant II), sin x is close to 1 and cos x is a small negative number, so the quotient is a large negative number. Just left of 3π2 (Quadrant III), sin x is close to −1 and cos x is a small negative number, so the quotient is a large positive number.Dividing a number near 1 or −1 by a number shrinking toward 0 gives outputs that grow past any bound. The signs of sin x and cos x decide whether the curve heads down or up.
    5. Draw one smooth rising curve through the three points. As x approaches π2 from the right, the curve drops without bound beside that dashed line. As x approaches 3π2 from the left, the curve rises without bound beside the other dashed line. The curve gets ever closer to each line but never touches or crosses it.Each branch of tangent is continuous and increasing on its open interval. The inputs x = π2 and x = 3π2 are outside the domain, so no point of the graph can lie on those lines. That is the meaning of a vertical asymptote: an excluded input where the outputs grow without bound as the inputs close in on it.
    6. Copy the branch π units left and π units right. Subtract π from each point to get (−π4,−1), (0, 0) and (π4,1) between x=−π2 and x=π2. Add π to each point to get (7π4,−1),(2π,0) and (9π4,1) between x=3π2 and x=5π2. Draw the new dashed lines x=−π2 and x=5π2, and keep every curve separate from every line.Tangent repeats every π, so tan(x + π) = tan x and tan(x − π) = tan x. Moving every point of one branch by π gives the neighboring branch. Moving a line x = π2 + nπ by π gives another line of the same form.
    Answer
    The branch lies between the vertical asymptotes x = π2 and x = 3π2, where cos x = 0. It passes through (3π4, −1), (π, 0) and (5π4, 1) and rises from left to right. It drops without bound as x approaches π2 from the right and rises without bound as x approaches 3π2 from the left. It never meets x = 3π2 because cos(3π2) = 0, which leaves tan x = sinxcosx undefined there. The three-branch sketch has vertical asymptotes x = −π2, x = π2, x = 3π2 and x = 5π2. The copied branches pass through (−π4, −1), (0, 0), (π4, 1) and through (7π4, −1), (2π, 0), (9π4, 1).
    Double-check Shift check: 3π4 − π = −π4, and tan(−π4) = (−22) ÷ 22 = −1, which matches tan(3π4). Also 5π4 − π = π4, and tan(π4) = 1, which matches tan(5π4). Rising check: the outputs −1, 0, 1 increase as the inputs 3π4, π, 5π4 increase. Asymptote check on a calculator in radian mode: π2 ≈ 1.571 and tan(1.6) ≈ −34.23, a large negative value just right of the left line. Also 3π2 ≈ 4.712 and tan(4.7) ≈ 80.71, a large positive value just left of the right line. Both match the drawn ends.

    Work to write

    1. cos x = 0 when x = π2 + nπ, so the branch through (π, 0) lies between x = π2 and x = 3π2
    2. cos(π2) = 0 and cos(3π2) = 0, so the dashed asymptotes are x = π2 and x = 3π2
    3. tan(3π4)=22÷(−22)=−1
    4. tan(π)=0÷(−1)=0
    5. tan(5π4)=(−22)÷(−22)=1
    6. Plot (3π4, −1), (π, 0) and (5π4, 1), then draw one smooth rising curve through them
    7. As x approaches π2 from the right, tan x drops without bound; as x approaches 3π2 from the left, tan x rises without bound
    8. x = 3π2 is not in the domain because cos(3π2) = 0, so the graph never touches that line
    9. Copies: (−π4, −1), (0, 0), (π4, 1) and (7π4, −1), (2π, 0), (9π4, 1)
    10. Asymptotes in the sketch: x = −π2, x = π2, x = 3π2, x = 5π2

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 4

    Plot the central zero

    Find and plot tan 0. This means use the input 0 radians, find its output, and place that input and output on the graph.

    Show the steps and the answer
    (0, 0)−π/2π/2−22
    The input 0 radians gives the point at the origin.
    1. Use sin0=0 and cos0=1.The unit-circle point at 0 is (1, 0), with cosine first and sine second.
    2. Divide 01=0 and plot (0, 0).A zero numerator divided by a nonzero denominator is 0; graph coordinates put the input first.
    Answer
    • tan 0 = 0.
    • Point: (0, 0).
    Double-check On the turning-ray picture, the point on a horizontal ray has vertical coordinate 0 and a positive horizontal coordinate, so its tangent ratio is 0.

    Rung 2 of 4

    Add the quarter-π points

    Add tan(−π4) and tan(π4) to the central sketch. This asks for the heights at the two inputs on either side of 0.

    Show the steps and the answer
    input x in radiansoutput tan x−π/4−100π/41↓ evaluate: input given, read the output below it
    The highlighted radian inputs add the two heights beside the zero.
    −101−π/2π/2−4−224
    In radians, these three points lie on one rising branch.
    1. At π4, divide 22 by 22 to get 1.Sine and cosine are equal and nonzero there.
    2. At −π4, divide −22 by 22 to get −1.Sine is negative and cosine positive, with equal magnitudes.
    3. Plot (−π4,−1), (0, 0), and (π4,1), then connect them with a smooth rising curve inside the boundary lines.The accepted inputs and outputs in the table guide the continuous increasing branch.
    Answer
    • tan(−π4)=−1.
    • tan(π4)=1.
    • Central branch: rises through the three points.
    Double-check A half-turn about the origin sends (π4, 1) to (−π4, −1), which matches tangent's odd symmetry.

    Rung 3 of 4

    Copy one full tangent branch

    Copy the central tangent branch one period to the right. This asks you to add π to its inputs, keep its outputs, and identify the new boundary lines.

    Show the steps and the answer
    input x in radiansoutput tan x3π/4−1π05π/41↓ evaluate: input given, read the output below it
    The copied radian inputs retain the original output row.
    −101π/2π3π/2−4−224
    This rising branch is one period, π radians, to the right.
    1. Move the interval endpoints: −π2+π=π2 and π2+π=3π2.A horizontal copy by the period adds π to every input.
    2. Move the key inputs: −π4+4π4=3π4,0+π=π, and π4+4π4=5π4.Common denominators let you add the π fractions while preserving their order.
    3. Keep the respective outputs −1, 0, and 1 and draw the rising branch.Period π means tangent's outputs repeat after π.
    4. Check cos(π2)=0 and cos(3π2)=0.Plugging the endpoints into the denominator confirms that both are excluded rather than plotted points.
    Answer
    • New interval: (π2, 3π2).
    • Boundary lines: x = π2, x = 3π2.
    • Key points: (3π4, −1), (π, 0), (5π4, 1).
    Double-check Use unit-circle signs at 3π4 and 5π4: equal magnitudes with opposite signs give −1, and equal negative signs give 1. At π, sine is 0 and cosine is −1, giving the zero at the branch's center.

    Rung 4 of 4

    Explain both sides near π2

    Use the original near-asymptote table and tan(1.58) ≈ −108.6492 to explain the behavior at π2. This asks why nearby finite outputs become large, why their signs differ across the line, and whether π2 itself has an output.

    input x in radiansoutput tan x, rounded1.45.79791.514.10141.5548.07851.5692.62051.571255.7656π/2undefined1.58−108.6492
    A table of 7 values of tan x, rounded, for x in radians from 1.4 to 1.58.
    Show the steps and the answer
    input x in radiansoutput tan x, rounded1.45.79791.514.10141.5548.07851.5692.62051.571255.7656π/2undefined1.58−108.6492↓ evaluate: input given, read the output below it
    The radian table distinguishes the last left input, the excluded boundary, and a right-side input.
    π/2−12−8−44812
    The curve's opposite unbounded behavior is visible on the two sides of π2 radians.
    1. Compare each input in the main table with π2≈1.570796: all five are smaller, and the gaps shrink from left to right.This identifies a one-sided approach from below; the inputs remain accepted radian inputs.
    2. Read the output row from the column under 1.4 to the column under 1.57: the rounded heights rise from 5.7979 to 1255.7656.The shrinking positive cosine denominator makes the quotient increasingly large.
    3. Compare 1.58 > 1.570796 and use quadrant II signs to explain its output ≈−108.6492.Right of π2, sine stays positive but cosine becomes negative, so tangent is negative; this output is rounded to four decimal places.
    4. At π2, substitute cos(π2)=0 and reject the quotient.The denominator check excludes the boundary input. Neither the table nor the phrase unbounded gives it a real value.
    Answer
    • Left approach: tangent grows positively without bound.
    • Right approach: tangent grows negatively without bound.
    • At π2: tangent is undefined.
    • The displayed nearby outputs are finite and rounded to four decimal places.
    Double-check Rebuild the reason without the table: sine tends toward 1, and cosine tends toward 0 with a positive sign on the left and a negative sign on the right. The supplied ten-decimal approximations sin(1.57) ≈ 0.9999996829 and cos(1.57) ≈ 0.0007963267 also give a quotient ≈ 1255.7656. You do not need to calculate a decimal-angle sine or cosine on your own to explain this growth.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: a vertical asymptote means only that a curve never touches a vertical line.
    Avoiding a line does not say that nearby outputs are unbounded. A missing point at an ordinary finite height would also leave a line untouched.
    ✓ Instead: Define a vertical asymptote by unbounded nearby outputs on at least one side; for these parent graphs, the input on that line is excluded.
    ✗ Not this: Counterexample: tan(π2) = ∞ because the table values are large.
    Every displayed accepted input has a finite output. At π2 the denominator is exactly 0, and infinity is not a real value.
    ✓ Instead: tan(π2) is undefined; its nearby outputs become unbounded.
    ✗ Not this: Counterexample: tangent is increasing across its entire domain, including across an asymptote.
    Increasing applies within each branch. A point immediately left of π2 has a large positive output, while a larger input immediately right has a large negative output.
    ✓ Instead: Each tangent branch is increasing; compare inputs within the same branch when using that statement.
    ✗ Not this: Counterexample: every zero denominator proves a vertical asymptote. The formula xx has a zero denominator at x = 0.
    For every nonzero x the quotient is 1: at 0.1 it is 0.1 ÷ 0.1 = 1, and at 0.01 it is 0.01 ÷ 0.01 = 1. The nearby outputs stay finite because the numerator shrinks too.
    ✓ Instead: A denominator zero locates an excluded input. To establish a vertical asymptote, also show unbounded nearby outputs. For tan, cot, sec and csc the numerator stays nonzero at each denominator zero.

    Tips and tricks

    • tangent rises on every branch. Put its zero halfway between its two boundary lines.
    • write undefined at the exact asymptote input. Write unbounded for the nearby behavior.
    • rebuild the boundary locations from cos x = 0 instead of guessing from the shape.

    7 The trap

    Calling infinity the output at an asymptote. Tangent has finite outputs at every accepted input, and no output at the denominator-zero input.

    Keep in mind

    • Infinity is not an output: tan 1.57 ≈ 1255.77 is huge but finite, and at the asymptote input itself there is no value.
    • Rising holds inside one branch only: tan 1.57 ≈ 1255.77, yet the larger input 1.58 gives about −108.65, across the asymptote.
    • Tangent's zeros sit halfway between neighboring asymptotes, at x = nπ, so never draw a wall at a zero.

    Memory hook

    Tangent climbs toward walls it never touches; the walls stand where cosine is 0, at π2 + nπ, and each branch crosses 0 halfway between two walls.

    Flash cards

    Say the answer out loud, then flip.

    What is a vertical asymptote?
    • A vertical line x = a near which the graph's heights grow without bound
    • for tan, cot, sec and csc the graph has no point on it.
    What does unbounded mean?
    The heights pass every ceiling, or every floor, you could name.
    Name the asymptotes of tan x between 2π and 4π.
    x = 5π2 and x = 7π2.
    Is tan 1.6 positive or negative?
    • Negative: 1.6 is past π2 ≈ 1.5708, in Quadrant II
    • tan1.6≈−34.2.
    True or false: tan 5π2 = ∞.
    False: cos 5π2 = 0, so tan 5π2 is undefined. ∞ is not a number.