Period: copy the right-sized piece
Quick review (2 minutes)
Think of a repeating wallpaper strip.
Rule: tan(x + π) = tan x and cot(x + π) = cot x. sec(x + 2π) = sec x and csc(x + 2π) = csc x. Their fundamental periods are π, π, 2π and 2π respectively.
1. Select π for tangent or cotangent and 2π for secant or cosecant.
2. Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
3. Copy its points and breaks left and right by integer multiples of the period.
4. For an exact value, add or subtract complete periods to reach a known allowed input.
In plain words, remove complete repeating pieces until each input is an angle you know. Find tan() and csc().
tan() = 1.
csc() = 1.
Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.
1. Read the function name and choose its fundamental period.
2. Find a familiar allowed input by adding or subtracting an integer number of periods.
3. Check the reduced input in the denominator.
4. Evaluate there or copy the entire graph piece, including its breaks.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Undefined
No output exists at that input. Here the formula would divide by zero.
Numerator
The top of a fraction, the amount being divided.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Branch
One connected piece of a graph. Here consecutive asymptotes bound each branch.
Period
A positive horizontal input distance after which the whole pattern repeats.
Fundamental period
The smallest positive period of a function.
Periodic function
A function whose outputs and allowed-input pattern repeat after a fixed positive input distance.
Coordinate
One number in a point's address, recording a horizontal or vertical position.
Ratio
One number compared with another by division, with a nonzero divisor.
Ray
A line that starts at one point and extends without end in one direction.
Quadrant
One of the four regions between the coordinate axes, numbered counterclockwise from upper right.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
1 In plain words
Think of a repeating wallpaper strip. You draw one complete design, then slide a copy sideways by the width of that design. A Period is that horizontal repeat distance on a function graph. A Periodic function keeps giving the same output after a fixed input step, wherever the input is allowed. The Fundamental period is the smallest positive repeat distance. Tangent and cotangent need only a half-turn, π radians. Secant and cosecant need a full turn, 2π radians. Repeating the same height once is not enough; the entire pattern, including its missing inputs, must repeat.
Explain it like I am five
Picture a rubber stamp that prints one piece of a wallpaper pattern. Stamp once, slide sideways by exactly the stamp's width, stamp again, forever in both directions. That width is the period: the smallest sideways slide that makes the whole graph repeat, gaps included.
For tangent and cotangent the stamp is π wide (half a lap, 180°). Adding π moves the circle point to the opposite side: (cos x, sin x) becomes (−cos x, −sin x). Tangent and cotangent divide one by the other, so the two minus signs cancel. Secant and cosecant have 1 on top and one coordinate on the bottom, so after π their sign flips; they need the full 2π.
Example: cot . Slide back one period: − π = − = . So cot = cot = 1, since cosine and sine are equal there. Check with signs: is in Quadrant III, where cotangent is positive.
2 Picture it
Reminder
Reminder: Signs in division, Fractions of π, Unit-circle half-turn, Domain
- Signs in division. = , but = −.
- Fractions of π.
- Unit-circle half-turn. A half-turn sends (1, 0) to (−1, 0), reversing both coordinates.
- Domain. Periodicity does not create a value at a forbidden input: tan( + π) remains undefined.
3 Why
Adding π moves a unit-circle point to its opposite, reversing both sine and cosine. Tangent and cotangent divide one by the other, so the two minus signs cancel. Secant and cosecant reverse their outputs because their numerator stays 1 while the denominator changes sign. They need another half-turn to return to their original outputs. Sine and cosine already repeat after 2π, so their reciprocals do too. Smaller steps fail to match the full patterns, as their repeating zeros or ±1 points show.
4 The rule
and .
and . Their fundamental periods are and respectively.
The same idea, five ways
Say period is the horizontal distance to the same complete pattern. P names the fundamental period here; means tangent's fundamental period, and the other subscripts name the other functions.
A periodic function has identical outputs at inputs separated by a repeat distance.
- f(x + P) = f(x)
- P > 0
- fundamental period: smallest such P
- graph words: slide the whole graph left or right by P
A wallpaper strip repeats after the width of one whole design.
The same idea, other ways
A copy of one tangent branch fits after a slide of π. A cosecant copy needs both a positive and a negative branch, a width of 2π.
A half-turn changes (cos x, sin x) into (−cos x, −sin x). Ratios keep their value; reciprocals reverse their sign.
A ratio becomes after both signs reverse, still . A reciprocal becomes , which is −.
Quotients repeat after π; reciprocals need 2π
A true period matches every allowed input, not one convenient pair of points. Check the guide denominator and its sign.
Part 1: Tangent and cotangent: a half-turn is enough
Their outputs compare two circle coordinates. After a half-turn both coordinates have reversed signs. The ratio is unchanged, so a sideways shift of π returns the same branch shape and height. This is also the smallest positive repeat distance: consecutive tangent zeros are π apart, and so are consecutive cotangent zeros.
- Rule: tan(x + π) = tan x and cot(x + π) = cot x.
- Fundamental period: π radians = 180°.
- Tangent's zeros are exactly nπ. A positive period must carry the zero at 0 to another zero; the smallest possible step is π, and π does repeat the graph.
- Cotangent's zeros are exactly + nπ. A period must carry one zero to another; the smallest positive spacing is π, and π repeats the graph.
The same idea, five ways
Say tangent and cotangent repeat every half-turn.
Adding π to an allowed input keeps the quotient output unchanged.
- = = π
- tan(x + nπ) = tan x
- cot(x + nπ) = cot x
- n any integer
A wallpaper tile the width of one branch repeats immediately.
Worked example
One extra half-turn keeps a tangent value
In plain words, add one half-turn and see whether the quotient changes. Find tan() from tan().
Show the steps and the answer
- .Four fourths of π make a half-turn.
- The sine and cosine both reverse sign, so their quotient is still 1.Two negatives divide to a positive.
- .The half-turn is a tangent period.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Quotients keep their value when both coordinates reverse.
Part 2: Secant and cosecant: a full turn is needed
Their numerator stays 1. After a half-turn, the denominator changes sign, so the output changes sign. That gives the opposite-height branch. You need a second half-turn to recover the starting denominator and output. For a reciprocal wave, one complete repeating piece therefore includes both its positive and negative parts.
- Rule: sec(x + 2π) = sec x and csc(x + 2π) = csc x.
- Fundamental period: 2π radians = 360°.
- A half-turn gives sec(x + π) = −sec x and csc(x + π) = −csc x.
- Secant next returns to output 1 after x = 0 at x = 2π; cosecant next returns to output 1 after at .
The same idea, five ways
Say secant and cosecant repeat every full turn.
A shift of π reverses their height; a shift of 2π keeps it.
- = = 2π
- sec(x + 2nπ) = sec x
- csc(x + 2nπ) = csc x
Two differently colored wallpaper tiles together make the repeating design.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Same breaks do not prove the same graph; compare output signs too.
5 How
- Select π for tangent or cotangent and 2π for secant or cosecant.
- Sketch a complete piece of that width, keeping excluded endpoints out of the graph.
- Copy its points and breaks left and right by integer multiples of the period.
- For an exact value, add or subtract complete periods to reach a known allowed input.
Choose a complete repeating piece
- Read the function name and choose its fundamental period.
- Find a familiar allowed input by adding or subtracting an integer number of periods.
- Check the reduced input in the denominator.
- Evaluate there or copy the entire graph piece, including its breaks.
6 Worked example
Worked example
Use a period to reach a familiar input
In plain words, remove complete repeating pieces until each input is an angle you know. Find tan() and csc().
Show the steps and the answer
- .2π is two tangent periods, so subtracting it preserves tangent's output.
- .The remaining input has equal positive sine and cosine.
- .2π is one cosecant period, so subtracting it preserves cosecant's output.
- .The remaining input has sine 1, whose reciprocal is 1.
- csc() = 1.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
Remove one quotient period
Find cot(). In plain words, remove one repeat of width π, then find the output at the remaining angle.
Show the steps and the answer
- Subtract : .Cotangent repeats every π, so this subtraction preserves its output.
- At , cosine is and sine is .This angle is π − , so vertical-axis reflection reverses cosine and keeps sine.
- Divide to obtain .Equal magnitudes with opposite signs divide to −1, and the sine denominator is nonzero.
Rung 2 of 4
Move a negative input to a familiar angle
Find tan(−). In plain words, add complete tangent repeats until the input becomes a familiar positive angle.
Show the steps and the answer
- Add : .Two tangent periods preserve the output and make the remaining angle familiar.
- At , sine and cosine are both , so tangent is 1.Equal nonzero numbers divide to 1.
Rung 3 of 4
Several reciprocal periods
Find sec(). In plain words, subtract full turns, then use the mirror input to take a known cosine reciprocal.
Show the steps and the answer
- Subtract : .6π is three full secant periods, so this finds a familiar input with unchanged output.
- Use .Reflecting across the horizontal axis preserves cosine.
- Take the reciprocal: .The denominator is nonzero and secant is its reciprocal.
Rung 4 of 4
A negative reciprocal input and a forbidden input
Find csc(−) and sec(). In plain words, reduce each input by complete periods, then check its own denominator before calculating.
Show the steps and the answer
- Add to , giving .A full cosecant period gives the same output at a familiar negative angle.
- , so .Horizontal-axis reflection reverses sine, and the reciprocal of a negative half is −2.
- Subtract from , giving .Two secant periods find an equivalent input for the denominator check.
- , so is undefined.The reduction finds a cosine-zero input, and substituting it into secant's denominator verifies that division is impossible.
- csc(−) = −2.
- sec() is undefined.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Quotients cancel two sign changes; reciprocals have only one to carry.
- Copy one branch for tan or cot and a positive-negative pair for sec or csc.
7 The trap
Using π to repeat secant or cosecant without changing the output sign. The next branch after π has the opposite sign; the same pattern returns after 2π.
Keep in mind
- Shifting sec or csc by π flips the sign instead of repeating it: sec 240° = sec(60° + 180°) = −2, the opposite of sec 60° = 2.
- Periodicity copies the gaps too: every asymptote of tan x sits exactly π from the next one.
- Only whole periods may be removed: tan(x + 5π) = tan x, but csc(x + 5π) = −csc x.
Memory hook
Tangent is in a hurry: tan and cot repeat every π; sec and csc, like the sin and cos they come from, take the full 2π.
Flash cards
Say the answer out loud, then flip.
What is the fundamental period?
Periods of tan, cot, sec and csc?
- tan: π
- cot: π
- sec: 2π
- csc: 2π