Even and odd: how the picture balances
Quick review (2 minutes)
Hold a paper graph up to a mirror along the vertical axis.
Rule: sec(−x) = sec x is even, with y-axis symmetry. tan(−x) = −tan x, cot(−x) = −cot x and csc(−x) = −csc x are odd, with origin symmetry. In each identity, x and −x must both be allowed inputs.
1. Check that the input is allowed before using symmetry.
2. If the function is secant, negate the input and keep the output height.
3. If it is tangent, cotangent or cosecant, negate both input and output.
4. On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.
In plain words, predict the heights at the mirror input without rebuilding the circle each time. Find sec(−) and tan(−) using the positive-angle values.
sec(−) = .
tan(−) = −1.
Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.
1. Find the function's even or odd rule.
2. Verify that the input and its opposite are allowed.
3. Keep the output for even symmetry; reverse it for odd symmetry.
4. Check the matching coordinates on the graph.
Tangent
Sine divided by cosine, defined when cosine is nonzero. Its graph has rising branches.
Cotangent
Cosine divided by sine, defined when sine is nonzero. Its graph has falling branches.
Secant
One divided by cosine, defined when cosine is nonzero. Its graph has y-axis symmetry.
Cosecant
One divided by sine, defined when sine is nonzero. Its graph has origin symmetry.
Sine
The vertical coordinate of the unit-circle point for an angle.
Cosine
The horizontal coordinate of the unit-circle point for an angle.
Integer
A whole count, including positive counts, negative counts and zero.
Domain
The set of inputs for which a function has an output.
Undefined
No output exists at that input. Here the formula would divide by zero.
Denominator
The bottom of a fraction, the number you divide by. It must be nonzero.
Zero
For a function, an allowed input where the output is 0. A zero of the denominator instead creates a forbidden input.
Reciprocal
One divided by a nonzero number. A number times its reciprocal equals 1.
Even function
A function whose domain includes opposite inputs together and has f(−x) = f(x). Its graph has y-axis symmetry.
Odd function
A function whose domain includes opposite inputs together and has f(−x) = −f(x). Its graph has origin symmetry.
Symmetry
A picture matches itself after a specified reflection or rotation.
With respect to (w.r.t.)
In relation to a specified reference. For symmetry, it names the axis or point used.
x-axis
The horizontal coordinate line, whose points have output coordinate y = 0.
y-axis
The vertical coordinate line, whose points have input coordinate x = 0.
Origin
The crossing of the axes, with coordinates (0, 0).
Function notation
A name followed by an input in parentheses, recording the output of that rule at that input.
Reflection
A mirror move across a line that reverses the perpendicular coordinate and keeps the coordinate along the line.
1 In plain words
Hold a paper graph up to a mirror along the vertical axis. If the mirror image matches the graph, it has Symmetry with respect to the y-axis. An Even function has that kind of balance. Secant is even: walking the same angle distance left or right gives the same height. For an Odd function, imagine turning the paper halfway around the origin. Every point moves to the opposite side and the opposite height. Tangent, cotangent and cosecant match after that half-turn. Even and odd name these balances; they do not say whether an output is an even or odd whole number.
Explain it like I am five
Picture a butterfly: fold it down the middle and the two wings match. A graph that matches its own mirror image across the y-axis like that belongs to an even function. Now picture a playing card such as a king: turn it upside down, a half turn about its center, and it looks the same. A graph that looks the same after a half turn about the origin, (0, 0), belongs to an odd function.
Example, with points written (input, height): a calculator set to radians gives sec 0.5 ≈ 1.14 and tan 0.5 ≈ 0.55 (≈ means about). Secant is even, so its graph also passes through about (−0.5, 1.14): opposite input, same height. Tangent is odd, so its graph also passes through about (−0.5, −0.55): opposite input, opposite height.
Why: going from x to −x mirrors the circle point (cos x, sin x) to (cos x, −sin x). Secant uses only cosine, so nothing changes. Tangent, cotangent and cosecant each contain one sine, so their sign flips.
2 Picture it
Reminder
Reminder: Negative division, Unit-circle reflection, Reciprocal of a root fraction, Coordinates, Domain restrictions, Function notation, With respect to (w.r.t.)
- Negative division. A minus in one position changes the sign: = −.
- Unit-circle reflection. At ±, cosine stays while sine changes sign.
- Reciprocal of a root fraction.
- Coordinates. The point (−1, −2) is left and below the origin because both coordinates are negative.
- Domain restrictions. cot 0 is undefined because sin 0 = 0, so do not substitute zero into its symmetry equation.
- Function notation. f names a rule: f(−x) means its output at the opposite input, while −f(x) means the negative of its original output.
- With respect to (w.r.t.). With respect to (w.r.t.) names the reference: secant's symmetry uses the y-axis as its mirror.
3 Why
Reflecting an angle across the horizontal axis keeps cosine and changes the sign of sine. Thus sec(−x) = 1 ÷ cos(−x) = 1 ÷ cos x = sec x. Tangent gets a sign change only on top; cotangent gets one only on the bottom; cosecant gets one on the bottom. Each therefore changes its output sign. Their forbidden inputs occur in opposite pairs, so reflecting an allowed input also gives an allowed input. The equalities apply wherever the functions are defined.
4 The rule
is even, with y-axis symmetry.
and are odd, with origin symmetry. In each identity, x and must both be allowed inputs.
The same idea, five ways
Say symmetry means a picture matches a reflection or a turn.
The four parent graphs have one of two kinds of balance.
- even: f(−x) = f(x)
- odd: f(−x) = −f(x)
- graph words: y-axis reflection or origin half-turn
A mirror or a half-turn lets you reproduce matching points.
The same idea, other ways
Even symmetry keeps the height and swaps left with right. Secant has that mirror balance.
Odd symmetry rotates the graph 180° about the origin. A point above and right gets a partner below and left.
A negative in exactly one place of a fraction makes its output negative. Sine reverses under x to −x; cosine keeps its sign.
sec keeps y; tan, cot, csc reverse y
Part 1: Even function: mirror across the y-axis
The word even means f(−x) = f(x), so opposite input positions have equal outputs. The mirror sits at x = 0, the y-axis. Secant has this balance because its denominator, cosine, already has it. Both sides of the graph can be built from one side.
- Rule: f(−x) = f(x) for an even function. The domain must also contain −x whenever it contains x.
- Point pair: (x, y) and (−x, y).
- Among these four functions, secant is even.
The same idea, five ways
Say even means opposite inputs, same output.
Secant is symmetric with respect to the y-axis.
- sec(−x) = sec x
- (x, y) and (−x, y)
- graph words: reflect left and right
A mirror on the vertical axis keeps the point's height.
Worked example
Reflect a taller secant point
In plain words, move the known point across the y-axis. sec() = 2. Find the point at input −.
Show the steps and the answer
- The known point is .Coordinates record input first, output second.
- Reflect to .Even symmetry reverses the input but preserves the output.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Even means equal heights.
Part 2: Odd function: half-turn about the origin
Odd symmetry means f(−x) = −f(x). Both directions change: left replaces right and down replaces up. Tangent, cotangent and cosecant have this balance. A graph can have origin symmetry even if it has no point at the origin. Cotangent and cosecant are examples because input zero is forbidden.
- Rule: f(−x) = −f(x) for an odd function. The domain must also contain −x whenever it contains x.
- Point pair: (x, y) and (−x, −y).
- Tangent, cotangent and cosecant are odd.
- Origin symmetry does not require a value at zero.
The same idea, five ways
Say odd means opposite inputs, opposite outputs.
The graph matches after a half-turn about the origin.
- cot(−x) = −cot x
- csc(−x) = −csc x
- (x, y) and (−x, −y)
A half-turn of the paper reverses both coordinates.
Worked example
Three odd partners
In plain words, reverse the signs of three known positive-input outputs. Find tan(−), cot(−) and csc(−).
Show the steps and the answer
- .Equal sine and cosine give both ratios 1.
- Negate the input and output: both negative-angle quotients equal .Both functions are odd.
- , so .Cosecant is odd too; its input ± is allowed.
- cot(−) = −1.
- csc(−) = −1.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write opposite input, opposite output beside the origin-symmetry rule.
5 How
- Check that the input is allowed before using symmetry.
- If the function is secant, negate the input and keep the output height.
- If it is tangent, cotangent or cosecant, negate both input and output.
- On the picture, pair (x, y) with (−x, y) for even symmetry or (−x, −y) for odd symmetry.
Use a negative input without recalculating
- Find the function's even or odd rule.
- Verify that the input and its opposite are allowed.
- Keep the output for even symmetry; reverse it for odd symmetry.
- Check the matching coordinates on the graph.
6 Worked example
Worked example
Same input distance, different symmetry
In plain words, predict the heights at the mirror input without rebuilding the circle each time. Find sec(−) and tan(−) using the positive-angle values.
Show the steps and the answer
- , and .The equal positive circle coordinates give tangent 1 and the refreshed reciprocal gives secant .
- .Even symmetry keeps the output height when the input changes sign.
- .Odd symmetry changes the output sign when the input changes sign.
- sec(−) = .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Even means equal heights. Odd means opposite input and opposite output.
- Check the domain before inserting a negative angle into a symmetry identity.
7 The trap
Reflecting an odd graph only across the y-axis. For an odd function both coordinates change sign, so the matching point lies across the origin.
Keep in mind
- Even and odd name a balance, not a kind of number: sec 0.5 ≈ 1.14 is not an even number, yet secant is an even function.
- For odd symmetry both coordinates flip: (0.5, 0.55) pairs with (−0.5, −0.55), never with (−0.5, 0.55).
- f(−x) is the height at the opposite input and −f(x) is the opposite of the old height; odd means the two match, as in tan(−0.5) = −tan 0.5 ≈ −0.55.
- Pair only allowed inputs: at an asymptote of tan x there is no point, so there is nothing to pair.
Memory hook
Butterfly or playing card: secant folds (even, mirror across the y-axis); tangent, cotangent and cosecant spin (odd, half turn about the origin).
Flash cards
Say the answer out loud, then flip.