Inverse trigonometric functions — quick review
Why a trig function needs its domain cut before it can have an inverse
A function is a machine: one input goes in, one output comes out.
Horizontal line test: a function has an inverse function exactly when no horizontal line crosses its graph more than once. A function that passes is called a one-to-one function. Every trig function repeats, so each one fails the test and must be cut first. Sine is cut to the restricted domain [−, ], where sin θ takes every value in [−1, 1] exactly once.
Say in plain words what is asked: can the function be run backward, that is, does each output come from only one input?
Picture the graph with inputs across and outputs up. For sine it is the wave that rises to 1 at , falls to −1 at and repeats every 2π.
Slide a horizontal line from the bottom of the graph to the top and watch for any height where it touches two or more points.
If it ever does, write the proof as a pair: two inputs with one shared output, such as sin() = sin() = . The function is not a one-to-one function, so on that domain it has no inverse function.
To repair a smooth wave like sine, keep a stretch of inputs with no turn inside it that still reaches every output. For sine that stretch is the restricted domain [−, ].
Check the stretch: evaluate sine at its ends and its middle, sin(−) = −1, sin 0 = 0 and sin() = 1, then slide the horizontal line again; each height from −1 to 1 should touch once.
Write the piece as an interval of inputs, for example [0, π].
Repeat check: look for a top or a bottom strictly inside the piece, or for two inputs with the same output. Either one means some horizontal line crosses twice.
Coverage check: find the outputs at the two ends and at any top or bottom, then list every height the piece reaches. Compare that with every height the full function reaches; for sine that is [−1, 1].
Ends check: if a needed height appears only at an end of the piece, that end must be kept, with a square bracket.
Agreement check: among the pieces that pass, use the agreed one, so your answers match everyone else's. For sine it is [−, ].
(a) Find two angles with the same sine, and use them to show that sine fails the horizontal line test.
(b) Show that on the angles − ≤ θ ≤ , sine takes every value in [−1, 1] exactly once.
(a) sin() = sin() = , so the line y = crosses the sine graph twice: sine fails the horizontal line test.
(b) On [−, ] the height climbs from −1 to 1 without turning back, so each value in [−1, 1] is taken exactly once.
Cutting sine to [0, π], the top half of the circle, because it looks like a natural half. On [0, π] sine climbs and then falls, so sin() = sin() = still repeats, and it never reaches a negative height. Sine's piece is the right half of the circle, from the bottom to the top: [−, ]. Say it to yourself: sine climbs the right side.
one-to-one function
A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.
horizontal line test
A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.
restricted domain
A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
The inverse sine
Sine takes an angle and gives back a height.
y = arcsin x, also written y = x, means sin y = x and − ≤ y ≤ .
Domain: [−1, 1]. Range: [−, ], which is −90° to 90°.
Turn the question into a sine question: y = arcsin x asks for the angle y from − to with sin y = x. The input x is a height; the answer y is an angle.
Check the input: if x is below −1 or above 1, stop. arcsin x is undefined.
Find the point on the right half of the unit circle whose height is x. Its angle is the answer: positive above the x-axis, negative below, 0 on it. The strategy below does this for the special heights.
Check the answer: it lies between − and , and its sine gives back x.
Check that −1 ≤ x ≤ 1. If not, write undefined and stop.
Drop the sign of x for now. If the positive version looks unfamiliar, rewrite it: 0.5 = , = .
Name the angle from 0 to with that sine: sin 0 = 0, sin = , sin = , sin = , sin = 1.
Put the sign back. If x is positive or 0, the angle from the last step is the answer. If x is negative, the answer is that angle with a minus sign: the same turn made clockwise, which lands below the x-axis where heights are negative.
Check: the answer lies between − and , and its sine equals x.
Evaluate arcsin(−) exactly.
arcsin(−) = −, which is −60°
Answering with an angle outside the range. For arcsin(−) it is tempting to write or : both have sine −, but neither lies between − and . The inverse sine answers only with angles from −90° to 90°, so a negative input always gets a negative angle, here −. Before you write any arcsin answer, check that it lies in that stretch.
one-to-one function
A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.
horizontal line test
A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.
restricted domain
A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
The inverse cosine
Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom.
The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0, π]. So y = arccos x, also written y = x, means cos y = x and 0 ≤ y ≤ π.
Domain of arccos: [−1, 1]. Range of arccos: [0, π].
Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to . An input of 0 puts it straight up, at . A negative input puts it on the top-left quarter, so the answer is past , up to π.
In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.
Domain check: the input must be from −1 to 1. If it is not, write undefined and stop.
Sign check: a positive input lands on the top-right quarter, 0 lands straight up at , a negative input lands on the top-left quarter.
Name the special angle in that quarter whose point has the input as its x-coordinate, mirroring the positive twin when the input is negative.
Test the answer: its cosine equals the input, and it lies from 0 to π.
Find the exact value of arccos(−). In words: the input is −; find the one angle from 0 to π whose cosine is −.
arccos(−) = , which is 120°
Answering a negative input with a negative angle, the way the inverse sine does: arccos(−) = − is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past , up to π: here . Catch the slip by taking the cosine of what you wrote: cos(−) = +, the wrong sign.
one-to-one function
A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.
horizontal line test
A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.
restricted domain
A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
inverse cosine (arccos)
The function that takes a number from −1 to 1 and gives back the angle from 0 to π whose cosine is that number. Written arccos x or x; said ark-KOH-sine.
The inverse tangent
Think of a ramp.
y = arctan x, also written y = tan⁻¹ x, means tan y = x and − < y < .
Domain: all real numbers, (−∞, ∞). Range: (−, ), with both ends left out. Horizontal asymptotes: y = − and y = .
Read arctan(a) as a question: which angle, strictly between − and , has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
If a has a square root in its bottom, rewrite it to match the table: = .
Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
Find a in the tan θ column of the table and read the angle at the start of its row.
Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between − and .
Find the exact value of arctan(−).
arctan(−) = −, which is −60°
Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of , of and of −, and it is tempting to write the first one that comes to mind. Only the principal value, −, lies strictly between − and , so arctan(−1) = −. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.
Turn arctan(a) into a question: which angle θ, with − < θ < , has tan θ = a?
Tidy the number so it can be matched: if it has a root in its bottom, multiply top and bottom by that root, so becomes .
Pick where to search on the right half of the circle: above the x-axis (0 < θ < ) when a is positive, below it (− < θ < 0) when a is negative, and θ = 0 when a = 0. On the right half the across is positive, so the tangent has the same sign as the height.
Find a in the tangent column of the special-angle table and read the angle in its row.
Check: work out tan θ = from the point on the circle and confirm it equals a, then confirm that θ is strictly between − and .
one-to-one function
A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.
horizontal line test
A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.
restricted domain
A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
Exact values by the sign and the quadrant
Finding an exact inverse value is like giving a taxi driver an address in two parts.
Let r be the reference angle: the angle from 0 to whose sine, cosine or tangent (the one being undone) equals the input without its minus sign. A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π − r for arccos. In symbols: arcsin(−x) = −arcsin x, arctan(−x) = −arctan x, arccos(−x) = π − arccos x. The result is the principal value: the one angle inside the range.
Name the reference angle: cover any minus sign and find the special angle from 0 to whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
Read the sign of the input: zero, positive or negative.
Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−) for arcsin, the left end (π) for arccos.
Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.
Name the reference angle. First say what is asked: arcsin x is the angle in [−, ] whose sine is x, arccos x is the angle in [0, π] whose cosine is x, and arctan x is the angle in (−, ) whose tangent is x. Then cover the minus sign and find the special angle r, from 0 to , in that function's row.
Read the sign of the input.
Pick the side the range allows: Quadrant I or its edge for a zero or positive input; Quadrant IV for a negative input to arcsin or arctan, or straight down for arcsin(−1); Quadrant II for a negative input to arccos, or the left end for arccos(−1).
Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
Check: evaluate the trig function of your answer and see the input come back with its sign, then confirm the answer is inside the range.
Find arcsin(−). In plain words: find the angle in [−, ] whose sine is −.
arcsin(−) = −
The most common slip here is the right point with the wrong name. For arcsin(−) many people write , because the unit circle they learned runs from 0 to 2π. The point is right, but is not between − and , so it is not the principal value. Name the same point by turning clockwise: −. And , in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
reference angle
The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to . Angles with the same reference angle share the same trig values, up to sign.
A function and its inverse undo each other, with conditions
Picture a Ferris wheel of radius 1 turning counterclockwise.
sin(arcsin x) = x for x in [−1, 1] (undefined for other x); arcsin(sin x) = x for x in [−, ], and for any other x it is the angle in [−, ] with the same sine.
cos(arccos x) = x for x in [−1, 1] (undefined for other x); arccos(cos x) = x for x in [0, π], and for any other x it is the angle in [0, π] with the same cosine.
Say what the problem asks, reading from the inside out: arcsin(sin θ) means 'take the sine of θ, then find the angle in [−, ] with that sine'.
Name the outside function; it decides the test. A trig function outside needs the number inside to be one its inverse accepts: from −1 to 1 for sin and cos, any number for tan. An inverse outside needs the angle inside to lie in its range: [−, ] for arcsin, [0, π] for arccos, (−, ) for arctan.
If the test passes, the two undo each other, and the answer is the number or angle you started with.
If a trig function is outside and the test fails, the inverse does not exist there: write undefined.
If an inverse is outside and the test fails, do not cancel. First make sure the inside value exists: tan() does not, so arctan(tan()) is undefined. Then find the inside value exactly from the unit circle, then find the angle in the range with that value by the four-step method of the last lesson.
Check: with an inverse outside, the answer lies in that inverse's range, and its sine, cosine or tangent equals the inside value; with sin, cos or tan outside, the answer is the number inside the inverse, which that inverse had to accept.
Say what it asks, reading from the inside out: the inner function acts first.
Name the outside function and run its test.
If the test passes, the answer is the value you started with.
If the test fails, a trig function outside means undefined; an inverse outside means you first check that the inside value exists (tan has none at ), then find it exactly, then the angle in the range with that value.
Check: with an inverse outside, the answer lies in its range and has the inside value as its sine, cosine or tangent; with sin, cos or tan outside, the answer equals the number you started with.
Find sin(arcsin(−)).
Canceling on sight. arcsin and sine look as if they cross out, so it is tempting to write arcsin(sin()) = . Before you cancel, test the angle against the range of the outside inverse. is past = , so it fails; work from the inside instead: sin() = , then arcsin() = .
one-to-one function
A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.
horizontal line test
A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.
restricted domain
A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
inverse sine (arcsin)
The function that takes a number from −1 to 1 and gives back the angle from − to whose sine is that number. Written arcsin x or x; said ark-SINE.
inverse cosine (arccos)
The function that takes a number from −1 to 1 and gives back the angle from 0 to π whose cosine is that number. Written arccos x or x; said ark-KOH-sine.
inverse tangent (arctan)
The function that takes any real number and gives back the angle strictly between − and whose tangent is that number. Written arctan x or x; said ark-TAN-jent.
reference angle
The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to . Angles with the same reference angle share the same trig values, up to sign.
Mixing the functions with a right triangle
Picture a ladder 5 feet long leaning on a wall, its top 3 feet up.
For an expression such as cos(arcsin a): let θ = arcsin a, the principal value; draw θ in the quadrant that its range and the sign of a allow; label two sides from a, with a minus sign on a leg that points left or down; find the third side from ad + op = hy; then read sin θ = , cos θ = or tan θ = . When θ lands on an axis (a = 0, or a = 1 or −1 for arcsin and arccos) there is no triangle: read the value from the point on the unit circle, for example cos(arcsin 1) = cos = 0. For a letter: cos(arcsin x) = , for −1 ≤ x ≤ 1.
Say it in words and name the inside angle: cos(arcsin()) is the cosine of θ, where θ = arcsin(), so sin θ = .
Pick θ's quadrant from the table: a positive input gives Quadrant I; a negative input gives Quadrant IV for the inverse sine and the inverse tangent, and Quadrant II for the inverse cosine. An input of 0, 1 or −1 to the inverse sine or inverse cosine, or 0 to the inverse tangent, puts the angle on an axis: read those from the unit circle.
Draw θ from the positive x-axis into that quadrant, and drop a line from the end of its slanted side to the x-axis. The right triangle this makes has the reference angle at the origin; giving its legs signs turns its ratios into the values for θ itself.
Label the two sides the input gives: a sine gives , a cosine gives , a tangent gives . A leg that points left or down is negative; the hypotenuse is always positive.
Find the third side with ad + op = hy: take the positive square root, then give a leg the sign of the direction it points.
Read the outside function as a ratio of the signed sides with SOH-CAH-TOA, then check the sign with All Silver Tea Cups.
Find the exact value of cos(arcsin()).
cos(arcsin()) =
Drawing every triangle in Quadrant I. A negative input moves the inside angle: to Quadrant IV for the inverse sine and the inverse tangent, to Quadrant II for the inverse cosine, and one leg turns negative. An input of −1 to the inverse sine or cosine puts the angle on an axis instead, where no triangle forms; read that answer from the unit circle. Skip this and you get the right size with the wrong sign: instead of − for tan(arccos(−)). Decide the quadrant before you draw anything.
Write 'Let θ = (the inside)' and say what θ is: θ = arccos(−) is the angle in [0, π] whose cosine is −.
Choose the quadrant from the range of the inside function and the sign of the input.
Draw the triangle in that quadrant and label the two sides the input gives, with the minus sign on a leg that points left or down, never on the hypotenuse.
Find the third side with the Pythagorean theorem and give it the sign of its direction.
Read the outside function as a ratio of the signed sides.
Check: the sign agrees with All Silver Tea Cups, and the inside function of your triangle gives back the input.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
reference angle
The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to . Angles with the same reference angle share the same trig values, up to sign.
Inverse values on a calculator, and why one answer is not all the answers
Picture a Ferris wheel.
The sin⁻¹, cos⁻¹ and tan⁻¹ keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin⁻¹ k in [−, ], cos⁻¹ k in [0, π], tan⁻¹ k in (−, ), named in the units the mode is set to.
On [0, 2π), sin t = k and cos t = k have two solutions when −1 < k < 1, one when k = 1 or k = −1, and none when k < −1 or k > 1; tan t = k has two for every k. With the reference angle α = the key pressed on |k|, the solutions are the angles among α, π − α, π + α and 2π − α (in degrees α, 180° − α, 180° + α, 360° − α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0, 2π) that solves the equation (sin t = 0 at 0 and π, cos t = 0 at and , tan t = 0 at 0 and π).
Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is ; degree mode shows 90.
Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.
Read the units and set the mode: π or [0, 2π) means radians, a degree sign means degrees. Test with sin⁻¹(1).
For sine or cosine, check that −1 ≤ k ≤ 1. If k is outside, write no solution and stop.
Find the reference angle α: press the inverse key on |k|, the number without its minus sign. Keep every digit.
Name the two quadrants from the sign of k, using All Silver Tea Cups. If k is 0, or 1 or −1 for sine or cosine, there are no quadrants to name: the answers sit on the axes.
Write each answer from α: Quadrant I, α; Quadrant II, π − α; Quadrant III, π + α; Quadrant IV, 2π − α (in degrees 180° − α, 180° + α, 360° − α). When k is 0, or 1 or −1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.
If the answers came from the key, round only now and write ≈; exact answers keep =. Check: press sin, cos or tan of each answer and see k, up to rounding.
Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.
θ ≈ 60.9° or θ ≈ 240.9°
The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.
restricted domain
A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
reference angle
The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to . Angles with the same reference angle share the same trig values, up to sign.