Quarry School

The inverse tangent

Subject: MathematicsLeans on: Tangent on the unit circleLeans on: Dividing fractionsLeans on: Dividing by zeroLeans on: RationalizingLeans on: Negative anglesLeans on: Radians to degreesLeans on: Tangent repeats every half turnLeans on: Round and square bracketsLeans on: Reflecting over y = xLeans on: The range of arcsinLeans on: Subtracting a negativeLeans on: Adding fractions with π
Level 1 · FoundationsAbout 22 min read1 new term
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Think of a ramp.

    Rule

    y = arctan x, also written y = tan⁻¹ x, means tan y = x and −π2 < y < π2.
    Domain: all real numbers, (−∞, ∞). Range: (−π2, π2), with both ends left out. Horizontal asymptotes: y = −π2 and y = π2.

    Step

    1. Read arctan(a) as a question: which angle, strictly between −π2 and π2, has tangent a? The input a is a tangent value, a steepness. The answer is an angle.

    2. If a has a square root in its bottom, rewrite it to match the table: 13 = 33.

    3. Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.

    4. Find a in the tan θ column of the table and read the angle at the start of its row.

    5. Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between −π2 and π2.

    Question

    Find the exact value of arctan(−3).

    Answer

    arctan(−3) = −π3, which is −60°

    Trap

    Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of 3π4, of 7π4 and of −π4, and it is tempting to write the first one that comes to mind. Only the principal value, −π4, lies strictly between −π2 and π2, so arctan(−1) = −π4. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.

    Strategy

    1. Turn arctan(a) into a question: which angle θ, with −π2 < θ < π2, has tan θ = a?

    2. Tidy the number so it can be matched: if it has a root in its bottom, multiply top and bottom by that root, so 13 becomes 33.

    3. Pick where to search on the right half of the circle: above the x-axis (0 < θ < π2) when a is positive, below it (−π2 < θ < 0) when a is negative, and θ = 0 when a = 0. On the right half the across is positive, so the tangent has the same sign as the height.

    4. Find a in the tangent column of the special-angle table and read the angle in its row.

    5. Check: work out tan θ = sinθcosθ from the point on the circle and confirm it equals a, then confirm that θ is strictly between −π2 and π2.

    Term

    one-to-one function

    Definition

    A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.

    Term

    horizontal line test

    Definition

    A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.

    Term

    restricted domain

    Definition

    A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.

    Term

    inverse function

    Definition

    The function that runs another one backward: if f sends a to b, the inverse f−1 sends b back to a. Its graph is the mirror image across the line y = x.

    Term

    principal value

    Definition

    The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.

    1 In plain words

    Think of a ramp. Its steepness is one number: how far it rises for each foot it runs forward. Tangent turns an angle into that steepness, since tan θ is rise divided by run. The inverse tangent, written arctan, works backward: you hand it a steepness and it hands back the angle. Every steepness can happen: 0 for flat ground, 1 for a 45° ramp, 1000 for an almost vertical cliff, a negative number for a downhill ramp. So arctan takes any number. But no ramp is perfectly vertical: straight up has no run, and rise ÷ 0 has no value. So the angle you get back is always strictly between straight down and straight up, −π2 and π2, and never either one.

    2 Picture it

    x = cos θy = sin θπ/4
    At π4 the height and the across are both 22, so tan π4 = 1 and arctan 1 = π4.

    Reminder

    Reminder: Tangent on the unit circle, Dividing fractions, Dividing by zero, Rationalizing, Negative angles, Radians to degrees, Tangent repeats every half turn, Round and square brackets, Reflecting over y = x, The range of arcsin, Subtracting a negative, Adding fractions with π
    • Tangent on the unit circle. tan θ = sinθcosθ, the point's height divided by its across. At π4 the point is (22, 22), so tan π4 = 1.
    • Dividing fractions. Flip the second fraction and multiply: 32 ÷ 12 = 32 × 21 = 3.
    • Dividing by zero. A number divided by 0 has no value: 10 is undefined, so tan π2 does not exist.
    • Rationalizing. Multiply top and bottom by the root in the bottom: 13 = 1·33·3 = 33. This multiplies by 33, which is 1, so the value does not change.
    • Negative angles. A negative angle turns clockwise from the positive x-axis: −π3 is a 60° turn clockwise, ending below the x-axis on the right.
    • Radians to degrees. Replace π with 180°: −π3 = −180°3 = −60°.
    • Tangent repeats every half turn. Half a turn away the point is (−across, −height), and (−height) ÷ (−across) = height ÷ across, so tan 5π4 = tan π4 = 1.
    • Round and square brackets. A round bracket leaves an end out and a square bracket keeps it: (−π2, π2) leaves out both ends, [−π2, π2] keeps both.
    • Reflecting over y = x. Swap the coordinates of every point: (π4, 1) on y = tan x becomes (1, π4) on y = arctan x.
    • The range of arcsin. arcsin answers from −π2 to π2 with both ends included: arcsin 1 = π2.
    • Subtracting a negative. Subtracting a negative is adding: 5 − (−2) = 5 + 2 = 7.
    • Adding fractions with π. Rewrite with a common bottom, then add the tops: π6 + π4 = 2π12 + 3π12 = 5π12.

    3 Why

    Tangent repeats every half turn, so one number is the tangent of many angles: tan π4 = tan 5π4 = 1. To get one answer we keep one piece of the tangent graph that rises through every number exactly once. Choosing the piece from −π2 to π2 is a convention: it is unbroken, holds 0, and is the right half of the circle that arcsin uses. Without one agreed piece, arctan(−1) could be −π4 to one person and 3π4 to another. The ends are left out because cos θ = 0 there, and tangent, sine ÷ cosine, would divide by zero.

    4 The rule

    y= arctan x, also written y=tan−1 x, means tany=x and −π2<y<π2.

    Domain: all real numbers, (−∞,∞). Range: (−π2,π2), with both ends left out. Horizontal asymptotes: y=−π2 and y=π2.

    The same idea, five ways

    Say it

    Say “arc tangent of x” (ark TAN-jent) or “tan inverse of x”. Both mean the angle whose tangent is x. Never read it as “one over tan x”.

    Write it

    The inverse tangent of a number is the one angle strictly between −π2 and π2 whose tangent is that number; that angle is called the principal value.

    In math
    • y = arctan x
    • y = tan⁻¹ x
    • tan y = x and −π2 < y < π2
    • domain: (−∞, ∞), all real numbers
    • range: (−π2, π2), that is {y | −π2 < y < π2}
    • graph: horizontal asymptotes y = −π2 and y = π2
    Like

    A ramp tilt finder: tell it how many feet a ramp rises per foot forward and it tells you the tilt. It works for any steepness, but it never says straight up or straight down.

    See it
    −π/20π/2
    The outputs of arctan fill the line strictly between −π2 and π2, with open dots because both ends are left…

    The same idea, other ways

    As a picture: the mirror

    Take the piece of y = tan x between −π2 and π2, its restricted domain. It climbs from far below to far above and hugs two vertical walls, the asymptotes x = −π2 and x = π2. It passes the horizontal line test, so it is a one-to-one function and has an inverse function. Flip it over the dashed line y = x by swapping the coordinates of every point: (π4, 1) becomes (1, π4). The flipped curve is y = arctan x. Its walls turn into a floor y = −π2 and a ceiling y = π2, the two horizontal asymptotes, and it runs left and right forever, because every input works.

    (π/4, 1)(1, π/4)−π−π/2π/2π−22
    Flip the middle branch of tan, between its walls at −π2 and π2, over the dashed line y = x.
    On the unit circle

    Keep only the right half of the unit circle and cut out its very top point (0, 1) and its very bottom point (0, −1). Every answer of arctan is an angle whose side ends on what is left. The tangent of that angle is the point's height divided by its across, which is the steepness of the side. Points above the x-axis give positive tangents, points below it give negative ones, and the point (1, 0) gives 0. At the two cut-out points the across is 0, so there is no tangent, and their angles, π2 and −π2, are never answers.

    x = cos θy = sin θπ/3
    At π3 the point is (12, 32); its height divided by its across is 3, so arctan 3 = π3.
    As a story: ramps

    A skateboard ramp that rises 1 foot for every 1 foot it runs has steepness 1, and arctan 1 = π4, a 45° tilt. A ramp that rises 3 feet, about 1.73, per foot is tilted π3, which is 60°. Build steeper and steeper ramps, rising 10, then 100, then 1000 feet per foot forward, and the tilt creeps toward 90° but never gets there, because a wall that goes straight up does not run forward at all. A downhill ramp has a negative steepness and a negative tilt: steepness −1 means a tilt of −π4.

    θrun 1rise 1√2
    Rise 1 over run 1 is a steepness of 1, and the angle θ at the left is π4, so arctan 1 = π4.
    With numbers

    The table shows angles creeping up toward 90° and their tangents, rounded. Read the bottom row from left to right: the tangent climbs from 1 to about 572.96, and it shoots up fastest as the angle gets close to 90°. Now read the table upward, which is what arctan does: an input of about 572.96 gives back only about 89.9°. No input, however large, gives 90° itself. That ceiling is the horizontal asymptote y = π2, since π2 is 90°. Large negative inputs work the same way toward the floor y = −π2.

    input θoutput tan θ45°160°√3 ≈ 1.7380°≈ 5.6789°≈ 57.2989.9°≈ 572.96
    Each step toward 90° makes the tangent far bigger.
    Why it must be true

    Suppose some number x had arctan x = π2. Then, by the definition, tan π2 = x. But the point at π2 is (0, 1), so tan π2 = 10, and dividing by zero has no answer: 12 cookies cannot be shared among 0 friends. So no x works, and π2 is not in the range. The same holds at −π2, where the point is (0, −1). Every angle strictly between them has an across bigger than 0, so its tangent exists, and those angles are exactly the outputs of arctan.

    12 ÷ 3 = 412 ÷ 2 = 612 ÷ 1 = 1212 ÷ 0 = ?0 groups: nowhere to put them, so no answer
    12 shared among 3, 2 and 1 groups works, but among 0 groups it has no answer.
    angle θpoint (cos θ, sin θ)tan θ = sin θ ÷ cos θread backward by arctan
    −π2(−90°)(0,−1)no value: −1 ÷ 0never an answer
    −π3(−60°)(12,−32)−3arctan(−3) = −π3
    −π4(−45°)(22,−22)−1arctan(−1) = −π4
    −π6(−30°)(32,−12)−33arctan(−33) = −π6
    0 (0°)(1, 0)0arctan 0 = 0
    π6(30°)(32,12)33arctan 33 = π6
    π4(45°)(22,22)1arctan 1 = π4
    π3(60°)(12,32)3arctan 3 = π3
    π2(90°)(0, 1)no value: 1 ÷ 0never an answer

    5 How

    1. Read arctan(a) as a question: which angle, strictly between −π2 and π2, has tangent a? The input a is a tangent value, a steepness. The answer is an angle.
    2. If a has a square root in its bottom, rewrite it to match the table: 13 = 33.
    3. Use the sign of a to pick where to look on the right half of the unit circle: above the x-axis if a > 0, below it if a < 0, and at angle 0 if a = 0.
    4. Find a in the tan θ column of the table and read the angle at the start of its row.
    5. Check: work out the tangent of your angle as sine ÷ cosine and confirm it gives a, then confirm the angle is strictly between −π2 and π2.

    Finding an exact inverse tangent

    1
    Does the number have a square root in its bottom, such as 13?
    YesRationalize it first: 13 = 33. Then go on.
    NoGo on.
    ↓
    2
    Is the number 0?
    YesThe answer is 0, because tan 0 = 01 = 0 and 0 is in the range. Stop.
    NoGo on.
    ↓
    3
    Is the number positive?
    YesSearch above the x-axis: the answer is between 0 and π2.
    NoIt is negative, so search below the x-axis: the answer is a negative angle between −π2 and 0.
    ↓
    4
    Is the number in the tangent column of the table: −3, −1, −33, 33, 1 or 3?
    YesRead the angle in its row. It is your answer.
    NoIt is not one of the special values. The angle still exists, because arctan takes every real number. Leave it written as arctan of the number, which is already exact, and place it between two table angles whose tangents surround it. Past 3 no table tangent is larger, so the angle lies between π3 and π2; below −3 it lies between −π2 and −π3.
    ↓
    5
    Did you get π2, −π2, or an angle outside them, such as 3π4 or 7π4?
    YesThat cannot be an inverse tangent. Search again on the right half of the circle, without its top and bottom points.
    NoWrite the answer and check it.
    1. Turn arctan(a) into a question: which angle θ, with −π2 < θ < π2, has tan θ = a?
    2. Tidy the number so it can be matched: if it has a root in its bottom, multiply top and bottom by that root, so 13 becomes 33.
    3. Pick where to search on the right half of the circle: above the x-axis (0 < θ < π2) when a is positive, below it (−π2 < θ < 0) when a is negative, and θ = 0 when a = 0. On the right half the across is positive, so the tangent has the same sign as the height.
    4. Find a in the tangent column of the special-angle table and read the angle in its row.
    5. Check: work out tan θ = sinθcosθ from the point on the circle and confirm it equals a, then confirm that θ is strictly between −π2 and π2.

    6 Worked example

    Worked example

    An exact value with a negative input: arctan(−3)

    Find the exact value of arctan(−3).

    Show the steps and the answer
    input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
    Arctan reads this table upward: the cell holding −3 in the tan θ row points up to −π3.
    −π/3terminal sideinitial side
    A 60° clockwise turn ends below the x-axis on the right half, where tangents are negative.
    1. Say what the question asks: find the one angle θ, with −π2<θ<π2, whose tangent is −3.That is the definition of arctan. The input −3 is a tangent value, and the output must be an angle on the right half of the circle, not at its very top or bottom.
    2. Decide where to search: below the x-axis, between −π2 and 0.Tangent is height ÷ across. On the right half the across is positive, so a negative tangent needs a negative height, which means a point below the x-axis.
    3. Find −3 in the tanθ row of the table and follow the arrow up: it sits under −π3.The point at −π3 is (12, −32), and its height divided by its across is −3. Reading the table from the bottom row up is exactly what arctan does.
    4. Make sure the angle is allowed: −π3 is −60°, and −90°<−60°<90°.Other angles also have tangent −3, such as 2π3 (120°) and 5π3 (300°), but they are outside the range, so they cannot be the answer.
    5. Write the answer: arctan(−3)=−π3.−π3 is the principal value: the only angle in the range whose tangent is −3.
    Answer
    arctan(−3) = −π3, which is −60°
    Double-check Work out tan(−π3) from its point (12, −32): (−32) ÷ 12 = (−32) × 21 = −3, the number we started with. And −π3 is strictly between −π2 and π2.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 7

    Rung 1, almost trivial: arctan(0)

    Find arctan(0).

    Show the steps and the answer
    x = cos θy = sin θ0
    At angle 0 the point is (1, 0): height 0, across 1, so the tangent is 0.
    1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=0?arctan takes a tangent value and returns the one allowed angle with that tangent.
    2. A tangent is 0 when the point's height is 0, so look for points on the x-axis: (1, 0) at angle 0 and (−1,0) at angle π.tan θ = height ÷ across, and a fraction is 0 exactly when its top is 0 and its bottom is not. This step finds every point where the tangent could be 0.
    3. Keep (1, 0) and drop (−1,0).(−1, 0) is on the left half, so its angle π is outside the range.
    4. Answer: arctan(0)=0.0 is the only allowed angle with tangent 0.
    Answer
    arctan(0) = 0
    Double-check Plug the answer back in: tan 0 = 0 ÷ 1 = 0, the number we started with, and 0 is between −π2 and π2.

    Rung 2 of 7

    Rung 2, a first special angle: arctan(1)

    Find arctan(1).

    Show the steps and the answer
    x = cos θy = sin θπ/4
    At π4 the height and the across are both 22, so their quotient is 1.
    θ11√2
    Two equal legs make two equal sharp angles, so θ = 45°, which is π4.
    1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=1?That is the definition of arctan: the input is a tangent, the output is an allowed angle.
    2. A tangent of 1 means height ÷ across =1, so the height and the across are equal.A fraction equals 1 when its top equals its bottom.
    3. On the right half, the height equals the across at π4, where the point is (22,22).A 45° angle sits halfway between the two axes, so its point is as high as it is far across.
    4. Answer: arctan(1)=π4.The only other point with equal height and across is at 5π4, on the left half, outside the range.
    Answer
    arctan(1) = π4, which is 45°
    Double-check tan π4 = 22 ÷ 22 = 1. A second way: a ramp that rises 1 foot per foot of run has two equal legs, so its two sharp angles are equal, and since they add to 90°, each is 45°.

    Rung 3 of 7

    Rung 3, a bigger tangent: arctan(3)

    Find arctan(3).

    Show the steps and the answer
    x = cos θy = sin θπ/3
    At π3 the point is (12, 32): the height is 3 times the across.
    1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=3?That is the definition of arctan.
    2. 3 is positive, so search above the x-axis: θ is between 0 and π2.On the right half the across is positive, so a positive tangent needs a positive height.
    3. Find 3 in the tanθ column of the table: it sits in the row of π3.The point at π3 is (12, 32), and 32 ÷ 12 = 3.
    4. Answer: arctan(3)=π3.π3 is in the range and has tangent 3.
    5. Watch the gotcha: 3 is not 32.32 is a height or an across on the circle, a sine or a cosine. 3, about 1.73, is too big to be a sine or a cosine, but it is a perfectly good tangent.
    Answer
    arctan(3) = π3, which is 60°
    Double-check tan π3 = 32 × 21 = 3. A second way, by the memory device: the tangents 33, 1, 3 grow with the angles π6, π4, π3, and 3 is the largest, so it belongs to the largest angle, π3.

    Rung 4 of 7

    Rung 4, a negative input: arctan(−1)

    Find arctan(−1).

    Show the steps and the answer
    −π/4terminal sideinitial side
    A 45° clockwise turn ends below the x-axis, halfway down to the bottom of the circle.
    input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
    The cell holding −1 in the tan θ row points up to −π4.
    1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=−1?That is the definition of arctan.
    2. −1 is negative, so search below the x-axis: θ is between −π2 and 0.On the right half the across is positive, so a negative tangent needs a negative height.
    3. A tangent of −1 means the height is the across with its sign flipped. Below the x-axis that happens 45° down, at the point (22,−22); in the tanθ row of the table, −1 sits under −π4.Height and across have the same size and opposite signs, so their quotient is −1.
    4. Name the angle by turning clockwise: −π4.The range runs from −π2 to π2, so a point below the x-axis gets a negative name. The same point is also called 7π4, but 7π4 is outside the range.
    5. Answer: arctan(−1)=−π4.It is the only allowed angle with tangent −1.
    6. Watch the gotcha: do not answer 3π4.tan 3π4 = 22 ÷ (−22) = −1 as well, but 3π4 is 135°, on the left half, outside the range.
    Answer
    arctan(−1) = −π4, which is −45°
    Double-check tan(−π4) = (−22) ÷ 22 = −1, the number we started with, and −90° < −45° < 90°.

    Rung 5 of 7

    Rung 5, a number in disguise: arctan(−13)

    Find arctan(−13).

    Show the steps and the answer
    input θoutput tan θ−π/3−√3−π/4−1−π/6−√3/300π/6√3/3π/41π/3√3↑ solve: output given, read every input above it
    After rewriting, −33 is in the tan θ row, and its arrow points up to −π6.
    1. Say what it asks: which angle θ, with −π2<θ<π2, has tanθ=−13?That is the definition of arctan.
    2. Rewrite the number to match the table: −13=−1·33·3=−33.Multiplying top and bottom by 3 multiplies by 1, so the value does not change, and 3 · 3 = 3.
    3. The number is negative, so search below the x-axis: θ is between −π2 and 0.On the right half the across is positive, so a negative tangent needs a negative height.
    4. Find −33 in the tanθ row: it sits under −π6.The point at −π6 is (32, −12), and (−12) ÷ 32 = −13 = −33.
    5. Answer: arctan(−13)=−π6.−π6 is in the range and has the right tangent.
    6. Watch the gotcha: −13 and −33 are the same number written two ways.If you search the table for −13 without rewriting it, you may think it is missing and give up.
    Answer
    arctan(−13) = −π6, which is −30°
    Double-check tan(−π6) = (−12) ÷ 32 = (−12) × 23 = −13, the number we started with, and −90° < −30° < 90°.

    Rung 6 of 7

    Rung 6, what can go in and what can come out

    Answer each, with a reason.
    (a) Does arctan(1000) have an answer, and roughly where is it?
    (b) Can arctan x equal 2π3 for some number x?
    (c) Can arctan x equal π2 for some number x?

    Show the steps and the answer
    0
    Domain of arctan: the whole line is shaded, so every number, 1000 included, is an allowed input.
    −1.570801.5708−π/2π/22π/3
    Range of arctan: open dots at −π2 and π2, and 2π3 lies outside the shaded part.
    1. (a) Ask whether 1000 is an allowed input: yes, the domain of arctan is all real numbers.A tangent is a steepness, and any steepness can happen: a ramp rising 1000 feet per foot of run is very steep, but it is not straight up.
    2. (a) Place the answer: tanπ3=3, about 1.73, is far below 1000, and the tangent keeps rising as the angle climbs toward π2. So arctan(1000) is between π3 and π2, very close to π2.On the right half a bigger tangent means a bigger angle, and no input reaches π2.
    3. (b) Compare 2π3 with the range: 2π3 is 120°, more than 90°.Every output of arctan is strictly between −90° and 90°, so 120° can never come out. tan 2π3 = −3 is a real number, but arctan(−3) is −π3, not 2π3.
    4. (c) Suppose arctan x=π2. Then tanπ2 would equal x.This is the definition read the other way: if y = arctan x, then tan y = x. The step tests whether any x could work.
    5. (c) The point at π2 is (0, 1), so tanπ2=10, which has no value. No x works.Dividing by zero has no answer, so π2 is left out of the range. The graph of arctan approaches the line y = π2 but never touches it.
    Answer
    • (a) Yes. arctan(1000) exists, between π3 and π2 and very close to π2.
    • (b) No. 2π3 is outside the range (−π2, π2).
    • (c) No. tan π2 does not exist, so π2 is not in the range.
    Double-check Read the two number lines: the domain line is shaded everywhere, so 1000 is allowed; the range line stops at an open dot at π2, about 1.57, and never reaches 2π3, about 2.09.

    Rung 7 of 7

    Rung 7, the hardest: arctan(3) − arctan(−1)

    Find the exact value of arctan(3) − arctan(−1).

    Show the steps and the answer

    arctan(3) = π3

    arctan(−1) = −π4

    π3−(−π4)=4π12+3π12

    =7π12

    1. Say what it asks: find each inverse tangent, then subtract the second angle from the first.Each arctan is one number, an angle in radians, so the whole expression is a subtraction of two numbers.
    2. arctan(3)=π3.tan π3 = 3 and π3 is in the range, as in rung 3.
    3. arctan(−1)=−π4.tan(−π4) = −1 and −π4 is in the range, as in rung 4.
    4. Subtract: π3−(−π4)=π3+π4.Subtracting a negative is adding.
    5. Add with the common bottom 12: π3=4π12 and π4=3π12, so the sum is 7π12.Fractions add only when their bottoms match. 12 is the smallest number that both 3 and 4 go into evenly, so multiply the top and bottom of π3 by 4 and of π4 by 3.
    6. Watch the gotcha: the answer 7π12 is bigger than π2, and that is fine.The range rule applies to each arctan, not to a number built from two of them. The rule mattered in step 3: answering 3π4 there would give π3 − 3π4 = 4π12 − 9π12 = −5π12, which is wrong.
    Answer
    7π12
    Double-check Check the two pieces first: tan π3 = 3 and tan(−π4) = −1. Then a second way, in degrees: 60° − (−45°) = 105°, and 7π12 = 7 × π12 = 7 × 15° = 105°, the same angle.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: arctan(−1) = 3π4, because tan 3π4 = −1.
    tan 3π4 really is −1, but 3π4 is 135°, on the left half of the circle. The inverse tangent answers only with an angle strictly between −π2 and π2.
    ✓ Instead: arctan(−1) = −π4: it is in the range, and tan(−π4) = (−22) ÷ 22 = −1.
    ✗ Not this: arctan(−1) = 7π4, because 7π4 ends at the same point as −π4.
    It is the right point with the wrong name. 7π4 is 315°, far past π2, so it is outside the range. For a point below the x-axis the range uses the clockwise name, a negative angle.
    ✓ Instead: arctan(−1) = −π4, a 45° turn clockwise.
    ✗ Not this: The range of arctan is [−π2, π2], the same as arcsin, so arctan of a huge number is π2.
    At π2 the point is (0, 1), and tan π2 = 10 has no value, so no number has π2 as its inverse tangent. The same is true at −π2.
    ✓ Instead: The range is (−π2, π2), with round brackets. A huge input gives an angle close to π2 but still less than it.
    ✗ Not this: arctan 2 has no answer, the same way arcsin 2 has none.
    arcsin takes only numbers from −1 to 1, because a sine is a height on a circle of radius 1. A tangent is a steepness, and a steepness can be any number, so arctan takes every real number.
    ✓ Instead: arctan 2 exists. It is not one of the special angles, but tan π3 = 3 ≈ 1.73 is less than 2 and the tangent keeps rising toward π2, so arctan 2 lies between π3 and π2.
    ✗ Not this: tan⁻¹(3) means 1tan3.
    On a function name the ⁻¹ means inverse, not one over. One over tangent is a different function, the cotangent. The reciprocal (tan π3)⁻¹ = 13 = 33 turns an angle into a number; the inverse tan⁻¹(3) turns the number 3 back into an angle.
    ✓ Instead: tan⁻¹(3) = arctan 3 = π3.

    Tips and tricks

    • Memory cue: arctan lives on the right half of the circle, the same half as arcsin, with the top and bottom points punched out because the across is 0 there. Punched-out ends get round brackets: (−π2, π2).
    • Memory device for the table: the tangents of π6, π4 and π3 are 33, 1 and 3, and each is 3 times the one before: 33 × 3 = 33 = 1, then 1 × 3 = 3. The negative angles have the same tangents with a minus sign.
    • Check every answer two ways: is it strictly between −π2 and π2, that is between −90° and 90°? Does its tangent, worked out as sine ÷ cosine, give back the number you started with?
    • When you write up a solution, put the definition line first: y = arctan x means tan y = x and −π2 < y < π2. Seeing the range on the page keeps you from answering 3π4 or 7π4.
    • In y = arctan x, x is a slope (a tangent value) and y is an angle. Do not read them as the horizontal and vertical positions of a unit-circle point.

    7 The trap

    Answering with an angle outside the range. Tangent repeats every half turn, so −1 is the tangent of 3π4, of 7π4 and of −π4, and it is tempting to write the first one that comes to mind. Only the principal value, −π4, lies strictly between −π2 and π2, so arctan(−1) = −π4. Before you write any inverse tangent, check that it is between −90° and 90°, with neither end allowed.

    Flash cards

    Say the answer out loud, then flip.

    What goes into the inverse tangent, and what comes out?
    • In: a steepness, which can be any real number. The domain is (−∞, ∞).
    • Out: an angle strictly between −π2 and π2 (between −90° and 90°). The range is (−π2, π2).
    Why are −π2 and π2 left out of the range of arctan?
    • At those angles cos θ = 0, so tangent, sine ÷ cosine, would divide by zero, like a vertical ramp with no run.
    • The graph only creeps toward those heights, so y = −π2 and y = π2 are horizontal asymptotes.
    tan 5π4 = 1. Is arctan(1) = 5π4?
    • No, arctan(1) = π4, the principal value.
    • 5π4 also has tangent 1, but it is outside the range (−π2, π2), so arctan never gives it.
    If a < 0, where on the unit circle is the angle arctan(a)?
    • On the right half, below the x-axis.
    • The angle is negative, strictly between −π2 and 0, like a downhill ramp.