Quarry School

The inverse cosine

Subject: MathematicsLeans on: Cosine is the x-coordinateLeans on: Signs by quadrantLeans on: Mirror across the vertical axisLeans on: Degrees to radiansLeans on: Square brackets include the endLeans on: The horizontal line testLeans on: The inverse sine's rangeLeans on: Rough sizes of √{2}, √{3} and πLeans on: Subtracting a negativeLeans on: Fractions over a common bottom
Level 1 · FoundationsAbout 21 min read4 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom.

    Rule

    The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0, π]. So y = arccos x, also written y = cos−1 x, means cos y = x and 0 ≤ y ≤ π.
    Domain of arccos: [−1, 1]. Range of arccos: [0, π].

    Step

    1. Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.

    2. Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.

    3. Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to π2. An input of 0 puts it straight up, at π2. A negative input puts it on the top-left quarter, so the answer is past π2, up to π.

    4. In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.

    5. Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.

    Strategy

    1. Domain check: the input must be from −1 to 1. If it is not, write undefined and stop.

    2. Sign check: a positive input lands on the top-right quarter, 0 lands straight up at π2, a negative input lands on the top-left quarter.

    3. Name the special angle in that quarter whose point has the input as its x-coordinate, mirroring the positive twin when the input is negative.

    4. Test the answer: its cosine equals the input, and it lies from 0 to π.

    Question

    Find the exact value of arccos(−12). In words: the input is −12; find the one angle from 0 to π whose cosine is −12.

    Answer

    arccos(−12) = 2π3, which is 120°

    Trap

    Answering a negative input with a negative angle, the way the inverse sine does: arccos(−12) = −π3 is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past π2, up to π: here 2π3. Catch the slip by taking the cosine of what you wrote: cos(−π3) = +12, the wrong sign.

    Term

    one-to-one function

    Definition

    A function in which no two inputs share an output, so every output comes from exactly one input. Only a one-to-one function can be run backward without confusion.

    Term

    horizontal line test

    Definition

    A picture check for one-to-one: if some horizontal line crosses a graph more than once, two inputs share an output and the function has no inverse as it stands.

    Term

    restricted domain

    Definition

    A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.

    Term

    inverse function

    Definition

    The function that runs another one backward: if f sends a to b, the inverse f−1 sends b back to a. Its graph is the mirror image across the line y = x.

    Term

    principal value

    Definition

    The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.

    Term

    inverse cosine (arccos)

    Definition

    The function that takes a number from −1 to 1 and gives back the angle from 0 to π whose cosine is that number. Written arccos x or cos−1 x; said ark-KOH-sine.

    1 In plain words

    Picture a protractor, the half-circle ruler for measuring angles, with its straight edge at the bottom. Number that edge −1 at the left end, 0 in the middle and 1 at the right end. Pick a spot on the edge, look straight up to the curved rim and read the angle there. Each spot lines up with exactly one angle, from 0° at the right end to 180° at the left. That is the inverse cosine. Cosine takes an angle and tells you how far left or right its point on the unit circle sits. The inverse cosine runs backward: give it the left-right position, and it hands back the one angle on the top half of the circle with that position.

    2 Picture it

    [0, π]
    Every answer of the inverse cosine lies on this half-turn over the top.

    Reminder

    Reminder: Cosine is the x-coordinate, Signs by quadrant, Mirror across the vertical axis, Degrees to radians, Square brackets include the end, The horizontal line test, The inverse sine's range, Rough sizes of 2, 3 and π, Subtracting a negative, Fractions over a common bottom
    • Cosine is the x-coordinate. The point at angle θ on the unit circle is (cos θ, sin θ): the 60° point is (12, 32), so cos 60° = 12 and sin 60° = 32.
    • Signs by quadrant. Left of the vertical axis every x-coordinate is negative, so cosine is negative in quadrant II: cos 150° = −32.
    • Mirror across the vertical axis. Reflecting a point across the vertical axis keeps its height, flips the sign of its x-coordinate, and turns the angle θ into 180° − θ: the 60° point (12, 32) becomes the 120° point (−12, 32).
    • Degrees to radians. Multiply by π180° and reduce: 120° × π180° = 120π180 = 2π3.
    • Square brackets include the end. [0, π] contains 0 and π themselves, so arccos 1 = 0 and arccos(−1) = π are allowed answers.
    • The horizontal line test. A function can be run backward only if no horizontal line crosses its graph twice: y = x2 fails, since the line y = 4 crosses it at x = −2 and at x = 2.
    • The inverse sine's range. arcsin x answers from −π2 to π2, the right half of the circle, so a negative input gives a negative angle: arcsin(−22) = −π4.
    • Rough sizes of 2, 3 and π. 2 ≈ 1.41, 3 ≈ 1.73 and π ≈ 3.14, all rounded, so 22 ≈ 0.71, 32 ≈ 0.87 and π2 ≈ 1.57.
    • Subtracting a negative. Subtracting a negative is adding the positive: 5 − (−2) = 5 + 2 = 7, and 3π4 − (−π4) = 3π4 + π4.
    • Fractions over a common bottom. With matching bottoms, add the tops: 3π4 + π4 = 4π4 = π. If the bottoms differ, multiply top and bottom to match first: 2π3 = 4π6.

    3 Why

    Why not reuse the inverse sine's right half, from −π2 to π2? There the left-right position is never negative, so arccos(−12) would have no answer, and positions repeat: −π3 and π3 both sit at 12. Over the top half, from 0 to π, the position slides from 1 down to −1 without turning back, so each number from −1 to 1 appears exactly once, passing the horizontal line test. The bottom half would work too. The top is the convention because it starts at 0 and puts inputs between 0 and 1 in the first quadrant, as right triangles do; calculators follow it, so another half would disagree with them.

    4 The rule

    The inverse cosine (arccos) is the inverse function of cosine on the restricted domain [0,π].

    So y= arccos x, also written y=cos−1 x, means cosy=x and 0≤y≤π.
    Domain of arccos: [−1,1]. Range of arccos: [0,π].

    The same idea, five ways

    Say it

    Say arc cosine of x, inverse cosine of x, or cosine inverse of x. All three mean the angle whose cosine is x.

    Write it

    y is the inverse cosine of x when y is the angle from 0 to π, both ends included, whose cosine is x.

    In math
    • y = arccos x
    • y=cos−1x
    • cos y = x and 0 ≤ y ≤ π
    • Domain: −1 ≤ x ≤ 1, written [−1, 1] or {x | −1 ≤ x ≤ 1}
    • Range: 0 ≤ y ≤ π, written [0, π] or {y | 0 ≤ y ≤ π}
    Like

    A protractor: pick a spot on its straight edge, look straight up, and read the one angle on the curved rim above that spot.

    See it
    x = cos θy = sin θπ/4
    The input is the left-right leg, here 22.

    The same idea, other ways

    As a picture

    Draw the unit circle and keep only its top half. Find the input on the horizontal axis, go straight up until you meet the circle, and the angle to that point is the answer. For the input 12 you meet the point at 60°, so arccos 12 = π3. For any input strictly between −1 and 1, going up you meet the circle once and going down you would meet a second point, which is why the bottom half is left out. At 1 and −1 the two halves touch, so there is only the one point.

    x = cos θy = sin θπ/3
    Straight up from x = 12 you meet the top half once, at 60°, so arccos 12 = π3.
    As a story

    Think of a fuel gauge whose needle swings over the top of its dial, from pointing straight right to pointing straight left, and never dips below its pivot. If someone tells you only how far left or right the tip of the needle is, you can still name the exact reading, because the needle passes over each left-right spot once. A clock hand does not work this way: it goes all the way around, and the hand pointing at 2 sits exactly as far right as the hand pointing at 4.

    With small numbers

    Walk along the top half and watch the cosine. In the table picture, the output row falls steadily from 1 down to −1 and never repeats a number, so cosine on the top half is a one-to-one function. That means you can read the table backward, from an output up to its input, and always get one answer: the highlighted −12 points up to 2π3.

    input θoutput cos θ01π/31/2π/202π/3−1/2π−1↑ solve: output given, read every input above it
    Along the top half the cosine only falls, so each output points back to exactly one angle.
    Why the inverse sine's half fails here

    Try the inverse sine's half, the right side from −π2 up to π2. Every point there sits on or to the right of the vertical axis, so every cosine there is 0 or more: no angle on that half has cosine −12. Also, the points at −π3 and π3 sit at the same left-right position, 12, so cosine on that half reaches 12 twice and cannot be run backward. The top half fixes both problems at once.

    −90° to 90°
    The inverse sine's half-turn runs up the right side, where x is never negative.
    As a rule of thumb

    Between 0 and 1 in, first quadrant out; 1 in, 0 out. Zero in, π2 out. Between −1 and 0 in, second quadrant out; −1 in, π out. The answer is never negative and never more than π, which is about 3.14, and an input above 1 or below −1 has no answer.

    QI (+, +)All positiveQII (−, +)Sine, csc positiveQIII (−, −)Tangent, cot positiveQIV (+, −)Cosine, sec positive
    Inverse cosine answers live on the top half, from 0 to π.
    input xarccos xthe same angle in degreesarcsin x, for contrast
    100°π2
    32π630°π3
    22π445°π4
    12π360°π6
    0π290°0
    −122π3120°−π6
    −223π4135°−π4
    −325π6150°−π3
    −1π180°−π2

    5 How

    1. Check the input. It must be from −1 to 1, ends included. If it is not, stop: the inverse cosine is undefined there, because no point on the unit circle sits farther left than −1 or farther right than 1.
    2. Say the question in words: find the angle from 0 to π whose cosine is the input. On the unit circle, that is the point on the top half whose x-coordinate equals the input.
    3. Use the sign of the input to pick the quarter. A positive input puts the point on the top-right quarter, so the answer is from 0 up to π2. An input of 0 puts it straight up, at π2. A negative input puts it on the top-left quarter, so the answer is past π2, up to π.
    4. In that quarter, name the special angle whose point has the input as its x-coordinate. For a negative input, find the positive twin first (the angle whose cosine is the same number without the minus sign) and mirror it across the vertical axis: the angle θ becomes π − θ. The table in this lesson lists all nine special inputs.
    5. Check before you write: the cosine of your answer must equal the input, and the answer must lie from 0 to π. Give the exact value in radians unless the question asks for degrees.

    Finding arccos x exactly

    1
    Is the input from −1 to 1, ends included?
    YesGo on.
    NoStop: arccos x is undefined, because no point on the unit circle has that x-coordinate.
    ↓
    2
    Is the input 0?
    YesThe answer is π2, the top of the circle.
    NoGo on.
    ↓
    3
    Is the input positive?
    YesLook on the top-right quarter: the answer is from 0 up to π2.
    NoThe input is negative, so look on the top-left quarter. The answer is past π2, up to π, and never negative.
    ↓
    4
    Does the cosine of your answer equal the input, and is the answer from 0 to π?
    YesDone: write the exact value in radians unless degrees are asked for.
    NoGo back: you picked the wrong point or the wrong half.
    1. Domain check: the input must be from −1 to 1. If it is not, write undefined and stop.
    2. Sign check: a positive input lands on the top-right quarter, 0 lands straight up at π2, a negative input lands on the top-left quarter.
    3. Name the special angle in that quarter whose point has the input as its x-coordinate, mirroring the positive twin when the input is negative.
    4. Test the answer: its cosine equals the input, and it lies from 0 to π.

    6 Worked example

    Worked example

    A negative input: arccos(−12)

    Find the exact value of arccos(−12). In words: the input is −12; find the one angle from 0 to π whose cosine is −12.

    Show the steps and the answer
    x = cos θy = sin θ2π/3
    The point at 120° on the top half has x-coordinate −12, so arccos(−12) = 2π3.
    1. Check the input: −12 is between −1 and 1.Only numbers from −1 to 1 are left-right positions on the unit circle, so only they have an inverse cosine.
    2. Turn the question into a picture: find the point on the top half of the unit circle whose x-coordinate is −12.The cosine of an angle is the x-coordinate of its point, and the inverse cosine answers only with angles from 0 to π, which sweep the top half.
    3. The input is negative, so look on the top-left quarter, past π2.Left of the vertical axis every x-coordinate is negative, and the top-left quarter is the part of the top half that lies there.
    4. Start from the positive twin: the 60° point is (12,32), so cos60°=12.60° is the special angle whose point sits 12 to the right of center.
    5. Mirror that point across the vertical axis: it becomes (−12,32), at 180°−60°=120°.The mirror keeps the height, flips the sign of the x-coordinate, and turns 60° into 180° − 60°, which lands in the top-left quarter as required.
    6. Convert to radians: 120°×π180°=120π180=2π3.π radians is 180°, and 120 over 180 reduces to 2 over 3 when you divide top and bottom by 60.
    7. Write the answer: arccos(−12)=2π3.2π3 lies from 0 to π and its cosine is −12, which is exactly what the definition asks for.
    Answer
    arccos(−12) = 2π3, which is 120°
    Double-check Take the cosine of the answer: cos 2π3 = −12, the x-coordinate of the 120° point, and 2π3 ≈ 2.09 (rounded) lies from 0 to π ≈ 3.14. The tempting −π3 fails both checks: it is below 0, and cos(−π3) = +12.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 8

    Rung 1: almost trivial, arccos 1

    Evaluate arccos 1. In words: the input is 1; find the angle from 0 to π whose cosine is 1.

    Show the steps and the answer
    x = cos θy = sin θ0
    With no turn at all the point sits at (1, 0), so arccos 1 = 0.
    1. Check the input: 1 is in [−1,1].The square bracket at 1 means 1 itself is included.
    2. Find the point on the top half whose x-coordinate is 1.Cosine is the x-coordinate of the point on the unit circle.
    3. The only such point is (1, 0), at the far right, where you have not turned at all: the angle is 0.The circle has radius 1, so it reaches x = 1 at one point only, the starting point of every angle.
    Answer
    arccos 1 = 0
    Double-check cos 0 = 1, and 0 is the left end of the range [0, π], which the square bracket includes. 2π also has cosine 1, but it is past π, so it is not the answer.

    Rung 2 of 8

    Rung 2: a positive input, arccos 32

    Evaluate arccos 32. In words: the input is 32; find the angle from 0 to π whose cosine is 32.

    Show the steps and the answer
    x = cos θy = sin θπ/6
    The 30° point sits 32 to the right of center, so arccos 32 = π6.
    1. Check the input: 32≈0.87 (rounded), which is between −1 and 1.3 ≈ 1.73, and half of that is about 0.87.
    2. The input is positive, so look on the top-right quarter, from 0 up to π2.Right of the vertical axis every x-coordinate is positive.
    3. The special point there with x-coordinate 32 is the 30° point, (32,12).Small angle, big x: a small turn leaves the point far to the right, so 30° has the bigger x-coordinate 32, while 60° has 12.
    4. Convert to radians: 30°×π180°=30π180=π6.30 over 180 reduces to 1 over 6 when you divide top and bottom by 30.
    Answer
    arccos 32 = π6
    Double-check cos π6 = 32, and π6 lies from 0 to π. The tempting π3 fails: cos π3 = 12, not 32.

    Rung 3 of 8

    Rung 3: the middle, arccos 0

    Evaluate arccos 0. In words: the input is 0; find the angle from 0 to π whose cosine is 0.

    Show the steps and the answer
    x = cos θy = sin θπ/2
    Straight up, the point (0, 1) is neither left nor right, so arccos 0 = π2.
    1. Check the input: 0 is between −1 and 1.0 is the middle of the domain [−1, 1].
    2. Find the point on the top half whose x-coordinate is 0: it is (0, 1), straight up.An x-coordinate of 0 means neither left nor right of center, and on the top half that is the very top.
    3. Straight up is a quarter turn: 90°, which is π2.A full turn is 2π, and a quarter of 2π is 2π4 = π2.
    Answer
    arccos 0 = π2
    Double-check cos π2 = 0, the x-coordinate of (0, 1), and π2 lies from 0 to π. The tempting answer 0 fails: cos 0 = 1, not 0. The inverse sine does give arcsin 0 = 0, which is why the two get mixed up.

    Rung 4 of 8

    Rung 4: the left end, arccos(−1)

    Evaluate arccos(−1). In words: the input is −1; find the angle from 0 to π whose cosine is −1.

    Show the steps and the answer
    x = cos θy = sin θπ
    A half turn reaches the far left point (−1, 0), so arccos(−1) = π.
    1. Check the input: −1 is in [−1,1].The square bracket at −1 means −1 itself is included.
    2. Find the point on the top half whose x-coordinate is −1: it is (−1,0), at the far left.The circle has radius 1, so it reaches x = −1 at one point only, the far left.
    3. Reaching the far left takes a half turn: 180°, which is π.A half turn is half of 2π.
    Answer
    arccos(−1) = π
    Double-check cos π = −1, and π is the right end of [0, π], included by the square bracket. Two tempting answers fail: −π also has cosine −1 but is negative, outside the range; −π2 is the inverse sine's answer for −1, and cos(−π2) = 0.

    Rung 5 of 8

    Rung 5: a negative input, arccos(−22)

    Evaluate arccos(−22). In words: the input is −22; find the angle from 0 to π whose cosine is −22.

    Show the steps and the answer
    x = cos θy = sin θ3π/4
    The 135° point is the mirror image of the 45° point, with x-coordinate −22.
    1. Check the input: −22≈−0.71 (rounded), which is between −1 and 1.2 ≈ 1.41, and half of that is about 0.71.
    2. The input is negative, so look on the top-left quarter, past π2.Left of the vertical axis every x-coordinate is negative.
    3. Start from the positive twin: the 45° point is (22,22).45° is the special angle whose x-coordinate is 22.
    4. Mirror it across the vertical axis: (−22,22), at 180°−45°=135°.The mirror keeps the height, flips the sign of the x-coordinate, and lands in the top-left quarter.
    5. Convert to radians: 135°×π180°=135π180=3π4.135 over 180 reduces to 3 over 4 when you divide top and bottom by 45.
    Answer
    arccos(−22) = 3π4
    Double-check cos 3π4 = −22, the x-coordinate of the 135° point, and 3π4 lies from 0 to π. The tempting −π4 fails twice: it is negative, and cos(−π4) = +22.

    Rung 6 of 8

    Rung 6: the look-alike, arccos(−32)

    Evaluate arccos(−32). In words: the input is −32; find the angle from 0 to π whose cosine is −32.

    Show the steps and the answer
    x = cos θy = sin θ5π/6
    The 150° point, the mirror of the 30° point, sits 32 to the left of center.
    1. Check the input: −32≈−0.87 (rounded), which is between −1 and 1.3 ≈ 1.73, and half of that is about 0.87.
    2. The input is negative, so look on the top-left quarter, past π2.Left of the vertical axis every x-coordinate is negative.
    3. Start from the positive twin: the 30° point is (32,12).Small angle, big x: of 30° and 60°, the smaller angle has the bigger x-coordinate, 32.
    4. Mirror it across the vertical axis: (−32,12), at 180°−30°=150°.The mirror keeps the height, flips the sign of the x-coordinate, and lands in the top-left quarter.
    5. Convert to radians: 150°×π180°=150π180=5π6.150 over 180 reduces to 5 over 6 when you divide top and bottom by 30.
    Answer
    arccos(−32) = 5π6
    Double-check cos 5π6 = −32, the x-coordinate of the 150° point, and 5π6 lies from 0 to π. Two look-alikes fail: 2π3 has cosine −12, not −32; 7π6 has the right cosine but sits on the bottom half, past π.

    Rung 7 of 8

    Rung 7: an input that looks like an angle, arccos(π2)

    Evaluate arccos(π2). In words: the input is the number π2; find the angle from 0 to π whose cosine is π2.

    Show the steps and the answer
    −101π/2[−1, 1]
    The domain [−1, 1] is shaded; π2 ≈ 1.57 sits to the right of it, so it has no inverse cosine.
    1. Remember what the input is: a cosine value, a left-right position, even though π2 looks like an angle.The inverse cosine takes a position in and gives an angle out.
    2. Check the input: π2≈1.57 (rounded), which is more than 1.π ≈ 3.14, and half of that is about 1.57.
    3. Stop: arccos(π2) is undefined.Every point on the unit circle has its x-coordinate from −1 to 1, so no angle has cosine 1.57.
    Answer
    Undefined: π2 ≈ 1.57 is outside the domain [−1, 1].
    Double-check The tempting answer 0 comes from cos π2 = 0, which runs the other way: the angle π2 goes in and 0 comes out. Try 0 here: cos 0 = 1, not π2, so 0 fails.

    Rung 8 of 8

    Rung 8: both inverses at once, arccos(−22) − arcsin(−22)

    Evaluate arccos(−22) − arcsin(−22). In words: find each angle, then subtract the second from the first.

    Show the steps and the answer

    arccos(−22) = 3π4, on the top half

    arcsin(−22) = −π4, on the right half

    3π4−(−π4)=3π4+π4=π

    1. Find arccos(−22): the input is negative, so the point is on the top-left quarter, at 135°, which is 3π4.The inverse cosine answers on the top half, and the 135° point is (−22, 22).
    2. Find arcsin(−22): the input is negative, so the point is on the lower part of the right half, at −45°, which is −π4.The inverse sine answers on the right half, from −π2 to π2, and the −45° point is (22, −22), whose height, the sine, is −22.
    3. Notice that one input gave two different angles, 3π4 and −π4.The two functions answer on different halves: the inverse sine on the right side, the inverse cosine on the cap.
    4. Rewrite the subtraction: 3π4−(−π4)=3π4+π4.Subtracting a negative is adding the positive.
    5. Add: 3π4+π4=4π4=π.The bottoms match, so add the tops: 3π + π = 4π, and 4π over 4 is π.
    Answer
    π
    Double-check Redo it in degrees: 135° − (−45°) = 135° + 45° = 180°, which is π. Each piece checks on its own: cos 3π4 = −22 and sin(−π4) = −22.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: arccos(−12) = −π3, because a negative input should give a negative angle, the way the inverse sine works.
    The inverse cosine never answers with a negative angle: its range is [0, π]. And −π3 does not even have the right cosine: turning 60° clockwise lands on the bottom right, where x is positive, so cos(−π3) = 12.
    ✓ Instead: arccos(−12) = 2π3, the top-left point at 120°, where cos 2π3 = −12.
    ✗ Not this: arccos(−12) = 4π3, because cos 4π3 = −12.
    The cosine is right, but 4π3 (240°) is on the bottom half, past π. Many angles have cosine −12; the inverse cosine returns only its principal value, the one from 0 to π.
    ✓ Instead: arccos(−12) = 2π3, the only angle from 0 to π with cosine −12.
    ✗ Not this: cos−1 0 = 1cos0 = 1, reading the small −1 as a power.
    In cos−1 the small −1 means run cosine backward, not one over cosine. One over cosine is a different function with its own name, secant.
    ✓ Instead: cos−1 0 = arccos 0 = π2, because cos π2 = 0 and π2 lies from 0 to π.
    ✗ Not this: arccos 2 is some angle; look for it on the circle.
    The x-coordinates on the unit circle only reach from −1 to 1, so no angle has cosine 2. The number 2 is outside the domain [−1, 1].
    ✓ Instead: arccos 2 is undefined: there is no angle to find.

    Tips and tricks

    • Memory cue: Sine takes the Side, Cosine takes the Cap. Inverse sine answers sit on the right side of the circle, from −π2 to π2; inverse cosine answers sit on the cap, the top half, from 0 to π.
    • Check every answer before you write it: the cosine of your answer must give back the input, and the answer must lie from 0 to π. Both checks must pass.
    • Small angle, big x: a small turn leaves the point far to the right. So 32, the bigger x-value, goes with the smaller angle π6, and 12 goes with the bigger angle π3.
    • Pattern for checking table work: in every row of this lesson's table, arccos x and arcsin x add to π2. For x = −12: 2π3 + (−π6) = 4π6 − π6 = 3π6 = π2. If your two answers do not add to π2, one or both are wrong: check each value and the half it sits on.
    • Do not memorize the table. Rebuild any row in seconds: picture the top half of the unit circle, find the point whose x-coordinate is the input, and name its angle.
    • Write the final answer as an exact value in radians, such as 2π3, not 120° or 2.09, unless the question asks for degrees or a decimal.

    7 The trap

    Answering a negative input with a negative angle, the way the inverse sine does: arccos(−12) = −π3 is wrong. The inverse cosine never answers below 0. A negative input puts the point left of the vertical axis on the top half, so the answer is past π2, up to π: here 2π3. Catch the slip by taking the cosine of what you wrote: cos(−π3) = +12, the wrong sign.

    Flash cards

    Say the answer out loud, then flip.

    In plain words, what does arccos x ask for?
    • The one angle from 0 to π whose cosine is x.
    • Picture a protractor whose straight edge reads −1 at the left end and 1 at the right end: find x on the edge, look straight up to the rim and read the angle there.
    What are the domain and range of arccos?
    • Domain: [−1, 1], the inputs it accepts.
    • Range: [0, π], the angles it gives back.
    What is arccos(−22)?
    • 3π4
    • The twin without the minus sign is arccos(22) = π4. A negative input lands on the top-left quarter, so mirror it across the vertical axis: π − π4 = 4π4 − π4 = 3π4.
    • Not −π4: arccos never answers below 0.
    Why does arccos answer from 0 to π instead of from −π2 to π2?
    • From 0 to π, the left-right position on the unit circle slides from 1 down to −1 without turning back, so each input from −1 to 1 gets exactly one angle.
    • From −π2 to π2, the position is never negative, and it repeats: π6 and −π6 both sit at 32.