Exact values by the sign and the quadrant
Quick review (2 minutes)
Finding an exact inverse value is like giving a taxi driver an address in two parts.
Let r be the reference angle: the angle from 0 to whose sine, cosine or tangent (the one being undone) equals the input without its minus sign. A zero or positive input gives r. A negative input gives −r for arcsin and arctan, and π − r for arccos. In symbols: arcsin(−x) = −arcsin x, arctan(−x) = −arctan x, arccos(−x) = π − arccos x. The result is the principal value: the one angle inside the range.
Name the reference angle: cover any minus sign and find the special angle from 0 to whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
Read the sign of the input: zero, positive or negative.
Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−) for arcsin, the left end (π) for arccos.
Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.
Name the reference angle. First say what is asked: arcsin x is the angle in [−, ] whose sine is x, arccos x is the angle in [0, π] whose cosine is x, and arctan x is the angle in (−, ) whose tangent is x. Then cover the minus sign and find the special angle r, from 0 to , in that function's row.
Read the sign of the input.
Pick the side the range allows: Quadrant I or its edge for a zero or positive input; Quadrant IV for a negative input to arcsin or arctan, or straight down for arcsin(−1); Quadrant II for a negative input to arccos, or the left end for arccos(−1).
Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
Check: evaluate the trig function of your answer and see the input come back with its sign, then confirm the answer is inside the range.
Find arcsin(−). In plain words: find the angle in [−, ] whose sine is −.
arcsin(−) = −
The most common slip here is the right point with the wrong name. For arcsin(−) many people write , because the unit circle they learned runs from 0 to 2π. The point is right, but is not between − and , so it is not the principal value. Name the same point by turning clockwise: −. And , in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
reference angle
The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to . Angles with the same reference angle share the same trig values, up to sign.
1 In plain words
Finding an exact inverse value is like giving a taxi driver an address in two parts. The first part says how far: the reference angle, the size of the turn, which you read off the special angles while ignoring any minus sign. The second part says which side of town: the quadrant. The sign of the input picks the side, but each inverse function drives only in its own neighborhood. The inverse sine and the inverse tangent stay on the right half of the circle, so a negative input sends them below the x-axis: a negative angle. The inverse cosine stays on the top half, so a negative input sends it to the left side: an angle past .
2 Picture it
Reminder
Reminder: Sine, cosine and the unit circle, Tangent from the point, Negative angles, Signs by quadrant, The three ranges, Allowed inputs, Inverse notation, Subtracting from π, Adding fractions, Subtracting a negative, Dividing fractions, Rationalizing, Radians and degrees
- Sine, cosine and the unit circle. The point at angle θ on the unit circle is (cos θ, sin θ): cosine is the x-coordinate and sine is the height. At the point is (, ), so cos = and sin = .
- Tangent from the point. Tangent is the height divided by the x-coordinate, y ÷ x. At the point is (, ), so tan = 1.
- Negative angles. A negative angle turns clockwise from the positive x-axis: − is a 30° clockwise turn and ends in Quadrant IV.
- Signs by quadrant. In Quadrant II, x < 0 and y > 0, so cosine is negative and sine is positive. In Quadrant IV, x > 0 and y < 0, so sine and tangent are negative and cosine is positive.
- The three ranges. arcsin: [−, ]. arccos: [0, π]. arctan: (−, ). A square bracket includes its end, and a round one leaves it out.
- Allowed inputs. arcsin and arccos accept only inputs from −1 to 1, because a sine or cosine is a coordinate on a circle of radius 1. So arcsin(2) has no answer, while arctan accepts every number.
- Inverse notation. sin⁻¹ x, cos⁻¹ x and tan⁻¹ x mean arcsin x, arccos x and arctan x. For example cos⁻¹(1) = 0, the angle whose cosine is 1. The −1 is not a power.
- Subtracting from π. Write π with the bottom you need, then subtract the tops: π − = − = .
- Adding fractions. Fractions add when their bottoms match: + = + = = .
- Subtracting a negative. Subtracting a negative adds its positive: 5 − (−2) = 5 + 2 = 7.
- Dividing fractions. Dividing by a fraction means multiplying by its flip: ÷ = · = .
- Rationalizing. To clear a root from the bottom, multiply the top and the bottom by that root: = , because · = 2.
- Radians and degrees. π radians is 180°, so = 30°, = 45° and = 135°.
3 Why
Each range is half of the circle, chosen earlier so each input has exactly one answer. The right half (arcsin, arctan) is Quadrant I above the x-axis and Quadrant IV below. Sine is the height, and tangent is the height divided by a positive left-right distance, so a negative input means below: Quadrant IV, or straight down when the inverse sine's input is −1. The top half (arccos) is Quadrant I on the right and Quadrant II on the left. Cosine is the left-right position, so a negative input means left: Quadrant II, or the left end, π, when the input is −1. Mirror images give the two answers: −r is r reflected across the x-axis, and π − r is r reflected across the y-axis.
4 The rule
Let r be the reference angle: the angle from 0 to whose sine, cosine or tangent (the one being undone) equals the input without its minus sign.
A zero or positive input gives r. A negative input gives for arcsin and arctan, and for arccos. In symbols: arcsinarcsin x, arctanarctan x, arccos arccos x. The result is the principal value: the one angle inside the range.
The same idea, five ways
The reference angle is how far the answer's side sits from the x-axis, ignoring which way.
The reference angle for an input is the angle from 0 to whose sine, cosine or tangent equals the input without its minus sign. It is also the angle between the answer's terminal side (the side where the turn ends) and the nearest part of the x-axis.
- r in [0, ]
- input − for sine: r = , because sin =
- answer = r, −r or π − r
Like the slant of a ladder: 45° off the ground is the same slant whether the ladder leans left or right. The slant is the reference angle, and the side it leans to is the quadrant.
The same idea, other ways
Picture the unit circle with the half each inverse may use shaded. arcsin answers on the right half, from straight down at − to straight up at , both ends included; arctan uses the same half with both ends left out. arccos answers on the top half, from 0 on the right to π on the left. A negative sine is a point below the x-axis, and on the right half those points are in Quadrant IV, plus the bottom end, −, for an input of −1. A negative cosine is a point left of the y-axis, and on the top half those points are in Quadrant II, plus the left end, π, for an input of −1.
Picture a round town cut into four quarters by a north-south road and an east-west road. The inverse sine driver delivers only in the east half, and so does the inverse tangent driver. The inverse cosine driver delivers only in the north half. Tell the inverse sine driver the address is south of the east-west road, and only one quarter of that driver's territory fits: the southeast, Quadrant IV. Tell the inverse cosine driver the address is west of the north-south road, and only the northwest fits: Quadrant II. Two addresses sit right on a road, at the edge of a quarter: due south, for the inverse sine of −1, and due west, for the inverse cosine of −1. The reference angle is the size of the turn between the east-west road and the line from the town centre to the house. The sign says which side of a road the house is on.
Cover the minus sign and solve the positive version first. Then put the minus sign back the way the function wants it: arcsin and arctan put it on the angle, and arccos takes the angle away from π. With numbers: arcsin() = , so arcsin(−) = −. arccos() = , so arccos(−) = π − = .
arcsin(−x) = −arcsin x
arctan(−x) = −arctan x
arccos(−x) = π − arccos x
Here r is the reference angle, strictly between 0 and . Turning by −r instead of r mirrors the point across the x-axis: x stays the same and the height changes sign. So sin(−r) = −sin r and tan(−r) = −tan r, which is why −r answers a negative sine or tangent, and −r stays on the right half. That move fails for cosine, because it keeps x. Mirror across the y-axis instead: the point at r goes to the point at π − r, the height stays and x changes sign. So cos(π − r) = −cos r, and π − r stays on the top half.
Degrees can make the pattern feel familiar, with π radians = 180°. The reference angle for is 30° for sine and 60° for cosine. So arcsin(−) = −30°, a 30° turn clockwise, and arccos(−) = 180° − 60° = 120°, which stops 60° short of a half turn. And arctan(−1) = −45°. Every arcsin and arctan answer lies between −90° and 90°, and every arccos answer between 0° and 180°. Back in radians: −30° = −, 120° = and −45° = −.
| Function | Range (half of the circle) | Input 0 or positive (r is the reference angle) | Input negative | Example |
|---|---|---|---|---|
| arcsin x | [−, ]: right half | Quadrant I or its edge: r | Quadrant IV, or straight down when x = −1: −r | arcsin(−) = − |
| arccos x | [0, π]: top half | Quadrant I or its edge: r | Quadrant II, or π itself when x = −1: π − r | arccos(−) = |
| arctan x | (−, ): right half, ends left out | Quadrant I or its edge: r | Quadrant IV: −r | arctan(−1) = − |
Part 1: The inverse sine of a negative input
The inverse sine answers only on the right half of the circle, from straight down (−) to straight up (). Sine is the height of the point. A negative input asks for a point below the x-axis, and the part of the right half below the x-axis is Quadrant IV together with its lowest point, straight down, which answers −1. To get there without leaving the range, you turn clockwise, so the answer is a negative angle: minus the reference angle.
- Range: [−, ], the right half: Quadrants IV and I, with straight down and straight up as its ends
- Input 0 or positive: the answer is r, in Quadrant I or on its edge
- Input negative: the answer is −r, in Quadrant IV, or straight down at − when the input is −1
- In symbols: arcsin(−x) = −arcsin x
Worked example
Arcsin(−)
Find arcsin(−). In plain words: find the angle in [−, ] whose sine is −.
Show the steps and the answer
- Reference angle: which angle from 0 to has sine ? It is .The point at is (, ), and the sine is its height, . So r = .
- Sign: is negative.A negative sine means a point below the x-axis.
- Quadrant: IV.The range covers Quadrants IV and I, and only Quadrant IV is below the x-axis.
- Angle: .Turning r = clockwise reaches Quadrant IV, and a clockwise turn is written with a minus sign.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- For a negative input, an arcsin answer always starts with a minus sign and is never below −.
Part 2: The inverse cosine of a negative input
The inverse cosine answers only on the top half of the circle, from the right end (0) over to the left end (π). Cosine is how far right or left the point is. A negative input asks for a point left of the y-axis, and the part of the top half on the left is Quadrant II together with the left end, which answers −1. So the answer goes past : turn all the way to π, then come back by the reference angle. It is never a negative angle.
- Range: [0, π], the top half: Quadrants I and II, with 0 and π as its ends
- Input 0 or positive: the answer is r, in Quadrant I or on its edge (r = when the input is 0)
- Input negative: the answer is π − r, in Quadrant II, or π itself when the input is −1
- In symbols: arccos(−x) = π − arccos x
Worked example
Arccos(−)
Find arccos(−). In plain words: find the angle in [0, π] whose cosine is −.
Show the steps and the answer
- Reference angle: which angle from 0 to has cosine ? It is .The point at is (, ), and the cosine is its x-coordinate, . It is not : sin is , but cos is .
- Sign: is negative.A negative cosine means a point left of the y-axis.
- Quadrant: II.The range covers Quadrants I and II, and only Quadrant II is left of the y-axis.
- Angle: .The Quadrant II angle with reference angle r stops r short of a half turn. Writing π as gives a common bottom, so the tops subtract: 6π − π = 5π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- An arccos answer is never negative. For a negative input it always lies between and π.
Part 3: The inverse tangent of a negative input
The inverse tangent answers on the right half of the circle, like the inverse sine, but the very top and bottom are left out, because tangent does not exist straight up or straight down. Tangent is the height divided by the left-right distance, and on the right half that distance is positive. So a negative tangent needs a negative height, which means Quadrant IV. The answer is a negative angle: minus the reference angle.
- Range: (−, ), the right half without its two ends, Quadrants IV and I
- Every number is allowed as an input
- Input 0 or positive: the answer is r, in Quadrant I or on its edge
- Input negative: the answer is −r, in Quadrant IV
- In symbols: arctan(−x) = −arctan x
Worked example
Arctan(−1)
Find arctan(−1). In plain words: find the angle strictly between − and whose tangent is −1.
Show the steps and the answer
- Reference angle: which angle from 0 to has tangent 1? It is .At the point is (, ). Tangent is y ÷ x, and a number divided by itself is 1. So r = .
- Sign: is negative.On the right half, a negative tangent means a negative height.
- Quadrant: IV.The range covers Quadrants I and IV. Tangent is positive in Quadrant I and negative in Quadrant IV.
- Angle: .Turning r = clockwise reaches Quadrant IV inside the range, and a clockwise turn is a negative angle.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- arctan follows the same sign rule as arcsin. The difference: arctan never equals − or , because tangent does not exist there.
5 How
- Name the reference angle: cover any minus sign and find the special angle from 0 to whose sine, cosine or tangent (the function you are undoing) equals what is left. Call it r. If the function is arcsin or arccos and what is left is more than 1, stop: there is no answer.
- Read the sign of the input: zero, positive or negative.
- Pick the quadrant the range allows: a zero or positive input stays in Quadrant I or on its edge, for all three functions. A negative input goes to Quadrant IV for arcsin and arctan, and to Quadrant II for arccos, except −1, which lands on an axis: straight down (−) for arcsin, the left end (π) for arccos.
- Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
- Check: take the sine, cosine or tangent of your answer and see the input come back, sign included. Then confirm the answer is inside the range.
The four-step method for an exact inverse value
- Name the reference angle. First say what is asked: arcsin x is the angle in [−, ] whose sine is x, arccos x is the angle in [0, π] whose cosine is x, and arctan x is the angle in (−, ) whose tangent is x. Then cover the minus sign and find the special angle r, from 0 to , in that function's row.
- Read the sign of the input.
- Pick the side the range allows: Quadrant I or its edge for a zero or positive input; Quadrant IV for a negative input to arcsin or arctan, or straight down for arcsin(−1); Quadrant II for a negative input to arccos, or the left end for arccos(−1).
- Write the angle: r for a zero or positive input, −r for a negative input to arcsin or arctan, π − r for a negative input to arccos. The axis cases come out of the same formulas: − for arcsin(−1), π for arccos(−1).
- Check: evaluate the trig function of your answer and see the input come back with its sign, then confirm the answer is inside the range.
6 Worked example
Worked example
Same input, two functions: arcsin(−) and arccos(−)
Find the exact values of arcsin(−) and arccos(−). In plain words: the input is − both times. First find the angle in [−, ] whose sine is −. Then find the angle in [0, π] whose cosine is −.
Show the steps and the answer
- Reference angle, for both: cover the minus sign and find the angle from 0 to whose sine is , and the one whose cosine is .At the point on the unit circle is (, ). Its height (the sine) and its x-coordinate (the cosine) are both , so the reference angle is r = for both questions.
- Sign, for both: the input is negative.The minus sign is what moves each answer out of Quadrant I.
- arcsin, quadrant: pick Quadrant IV.The range [−, ] is the right half of the circle, Quadrants IV and I. Sine is the height, and the height is negative only in Quadrant IV of those two.
- arcsin, angle: write .Inside the range, Quadrant IV is reached by turning r clockwise, and a clockwise turn is a negative angle.
- arccos, quadrant: pick Quadrant II.The range [0, π] is the top half of the circle, Quadrants I and II. Cosine is the x-coordinate, and x is negative only in Quadrant II of those two.
- arccos, angle: write .The Quadrant II angle with reference angle r stops r short of a half turn, so it is π − r. Writing π as gives both fractions the bottom 4, and then the tops subtract: 4π − π = 3π.
- arcsin(−) = −
- arccos(−) =
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Rung 1: a positive input
Find arccos(). In plain words: find the angle in [0, π] whose cosine is .
Show the steps and the answer
- Reference angle: in the cosine row, , so .The point at is (, ), and cosine is the x-coordinate. Use the cosine row, not the sine row: sin is also , but that is a sine.
- Sign: positive.There is no minus sign in front of .
- Quadrant: I.Quadrant I is inside all three ranges, and both coordinates are positive there.
- Angle: .In Quadrant I the answer is the reference angle itself.
Rung 2 of 7
Rung 2: an input of zero
Find arcsin(0) and arccos(0). In plain words: find the angle in [−, ] whose sine is 0, then the angle in [0, π] whose cosine is 0.
Show the steps and the answer
- arcsin(0), reference angle: the angle from 0 to with sine 0 is 0.At angle 0 the point is (1, 0), and its height is 0.
- arcsin(0), sign and angle: zero is not negative, so the answer is .Only a negative input moves the answer out of Quadrant I and its edges.
- arccos(0), reference angle: the angle from 0 to with cosine 0 is .At the point is (0, 1), straight up, and its x-coordinate is 0.
- arccos(0), sign and angle: zero is not negative, so the answer is .The same rule: no minus sign, so no move away from the reference angle.
- arcsin(0) = 0
- arccos(0) =
Rung 3 of 7
Rung 3: a negative input for the inverse tangent
Find arctan(−). In plain words: find the angle strictly between − and whose tangent is −.
Show the steps and the answer
- Reference angle: the angle from 0 to with tangent is .At the point is (, ). Tangent is y ÷ x = ÷ = · = , and multiplying top and bottom by gives .
- Sign: negative.The input has a minus sign in front.
- Quadrant: IV.arctan answers on the right half, Quadrants I and IV, and tangent is negative only in Quadrant IV of those two.
- Angle: .A clockwise turn of r reaches Quadrant IV inside the range, and clockwise is negative.
Rung 4 of 7
Rung 4: answers at the ends of the range
Find arcsin(−1) and arccos(−1). In plain words: find the angle in [−, ] whose sine is −1, then the angle in [0, π] whose cosine is −1.
Show the steps and the answer
- arcsin(), reference angle: the angle from 0 to with sine 1 is .At the point is (0, 1), straight up, with height 1.
- arcsin(), sign and angle: negative, so the answer is .For arcsin a negative input means a clockwise turn. Turning clockwise points straight down, the bottom end of the range.
- arccos(), reference angle: the angle from 0 to with cosine 1 is 0.At 0 the point is (1, 0), with x-coordinate 1.
- arccos(), sign and angle: negative, so the answer is .For arccos a negative input means mirroring across the y-axis: (1, 0) mirrors to (−1, 0), which sits at a half turn, π.
- arcsin(−1) = −
- arccos(−1) = π
Rung 5 of 7
Rung 5: an input that is not allowed
Find arccos(−), if it exists. In plain words: is there an angle in [0, π] whose cosine is −?
Show the steps and the answer
- Size of the input: is about 1.73, so is about .1.7 × 1.7 = 2.89 and 1.8 × 1.8 = 3.24, so the number that squares to 3 sits between 1.7 and 1.8.
- Allowed inputs: arccos accepts only numbers from to 1.Cosine is the x-coordinate of a point on a circle of radius 1, so it is never below −1. About −1.73 is below −1.
- Stop: arccos() does not exist.No angle has cosine −, so the reference angle step has nothing to find: no special angle has cosine .
- Name the trap: belongs to the tangent row, since . So arctan does exist.arctan accepts every number and arccos does not. Borrowing a value from the wrong row is how arccos(−) gets a fake answer.
Rung 6 of 7
Rung 6: inverse notation and an input in disguise
Find cos⁻¹(−). In plain words: the input is −. Find the angle in [0, π] whose cosine is that number.
Show the steps and the answer
- Notation: means arccos.The −1 written up high means the inverse function, as with sin⁻¹. It does not mean 1 divided by cosine.
- Clear the root from the bottom: .Multiplying the top and the bottom by the same number leaves a fraction's value unchanged, and · = 2. The input is −, a special value in disguise.
- Reference angle: , so .The point at is (, ).
- Sign and quadrant: negative, so Quadrant II.arccos answers on the top half, and a negative cosine puts the point on its left part, Quadrant II.
- Angle: .The Quadrant II angle with reference angle r is π − r, and π = gives a common bottom.
Rung 7 of 7
Rung 7: the hardest kind, two inverses in one expression
Find the exact value of arccos(−) − arcsin(−). In plain words: find each angle on its own with the four steps, then subtract the second angle from the first.
Show the steps and the answer
- arccos(), reference angle: , so .The point at is (, ), and cosine is the x-coordinate.
- arccos(), sign, quadrant and angle: negative, so Quadrant II, and .arccos answers on the top half, and a negative cosine means its left part.
- arcsin(), reference angle: , so .The point at is (, ), and sine is the height. The two reference angles differ because they come from different rows.
- arcsin(), sign, quadrant and angle: negative, so Quadrant IV, and the answer is .arcsin answers on the right half, and a negative height means its lower part, reached by a clockwise turn.
- Subtract: .Subtracting a negative number adds its positive, the way 5 − (−2) = 7.
- Add with a common bottom: , so .Fractions add only when their bottoms match. Multiplying the top and bottom of by 2 turns thirds into sixths.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: cosine on top, sine and tangent on the right. Every arccos answer is on the top half of the circle, from 0 to π. Every arcsin and arctan answer is on the right half, from − to .
- Memory device for a negative input: sine and tangent turn clockwise, cosine turns past straight up. arcsin and arctan give −r. arccos gives π − r, which is more than .
- No inverse ever answers in Quadrant III, because none of the three ranges reaches it. An answer such as or is always wrong.
- Check every answer twice: take the sine, cosine or tangent of your angle and see the input come back with its sign, then confirm the angle is inside the range. An answer that passes only the first check is the most common slip.
- On paper, write the four steps as one line, for example: r = , negative, arccos, Quadrant II, π − = . Each decision is visible, so a slip is quick to spot.
- If the input has a root in the bottom, such as −, rationalize it first so it matches a value in the special-angle table: = .
7 The trap
The most common slip here is the right point with the wrong name. For arcsin(−) many people write , because the unit circle they learned runs from 0 to 2π. The point is right, but is not between − and , so it is not the principal value. Name the same point by turning clockwise: −. And , in Quadrant III, is never an answer. Before you write any inverse value, hold it up against the range.
Flash cards
Say the answer out loud, then flip.
Like a taxi address, an exact inverse value has two parts. What are they?
- How far: the reference angle r, the angle from 0 to whose sine, cosine or tangent equals the input with its minus sign covered.
- Which side: the quadrant, picked by the sign of the input, but only inside that function's range; the inputs 0, 1 and −1 (for arctan, only 0) land on an axis instead.
For arcsin or arctan, where does a negative input land, and what angle do you write?
- Below the x-axis, in Quadrant IV or on its edge, because their range is the right half of the circle.
- Write −r. For example, arctan(−) = −, since tan = .
For arccos, where does a negative input land, and what angle do you write?
- Left of the y-axis, in Quadrant II or on its edge, because its range is the top half of the circle.
- Write π − r. For example, arccos(−) = π − = , since cos = .
Why is the wrong answer for arcsin(−)?
- It names the right point, but it is outside the arcsin range, − to , so it is not the principal value.
- Name the same point by turning clockwise: −.