Inverse values on a calculator, and why one answer is not all the answers
Quick review (2 minutes)
Picture a Ferris wheel.
The sin⁻¹, cos⁻¹ and tan⁻¹ keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: sin⁻¹ k in [−, ], cos⁻¹ k in [0, π], tan⁻¹ k in (−, ), named in the units the mode is set to.
On [0, 2π), sin t = k and cos t = k have two solutions when −1 < k < 1, one when k = 1 or k = −1, and none when k < −1 or k > 1; tan t = k has two for every k. With the reference angle α = the key pressed on |k|, the solutions are the angles among α, π − α, π + α and 2π − α (in degrees α, 180° − α, 180° + α, 360° − α) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or −1 for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in [0, 2π) that solves the equation (sin t = 0 at 0 and π, cos t = 0 at and , tan t = 0 at 0 and π).
Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is ; degree mode shows 90.
Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.
Read the units and set the mode: π or [0, 2π) means radians, a degree sign means degrees. Test with sin⁻¹(1).
For sine or cosine, check that −1 ≤ k ≤ 1. If k is outside, write no solution and stop.
Find the reference angle α: press the inverse key on |k|, the number without its minus sign. Keep every digit.
Name the two quadrants from the sign of k, using All Silver Tea Cups. If k is 0, or 1 or −1 for sine or cosine, there are no quadrants to name: the answers sit on the axes.
Write each answer from α: Quadrant I, α; Quadrant II, π − α; Quadrant III, π + α; Quadrant IV, 2π − α (in degrees 180° − α, 180° + α, 360° − α). When k is 0, or 1 or −1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.
If the answers came from the key, round only now and write ≈; exact answers keep =. Check: press sin, cos or tan of each answer and see k, up to rounding.
Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.
θ ≈ 60.9° or θ ≈ 240.9°
The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.
restricted domain
A smaller set of inputs chosen on purpose, keeping only a piece of the graph that passes the horizontal line test, so the function gets an inverse.
inverse function
The function that runs another one backward: if f sends a to b, the inverse sends b back to a. Its graph is the mirror image across the line y = x.
principal value
The one answer an inverse trig function gives, picked by an agreed rule from the infinitely many angles that share a sine, cosine or tangent. Principal means main.
reference angle
The angle between an angle's ending side and the nearest part of the x-axis, always from 0 to . Angles with the same reference angle share the same trig values, up to sign.
1 In plain words
Picture a Ferris wheel. In every turn your seat passes each height between the bottom and the top twice: once on the way up and once on the way down. The top and the bottom themselves come once. Ask a careful friend when your seat was 0.6 of the way from the center up to the top, and you hear both moments. Ask your calculator and you hear one, the moment on the way up, because its sin⁻¹ key was built to give a single answer, the principal value. So the calculator is a quick helper with two habits you must manage. It speaks degrees or radians, and you choose which before you ask. It always gives one answer, so when a question wants every angle in a full turn, you find the twin yourself.
2 Picture it
Reminder
Reminder: Signs by quadrant, sin⁻¹ means the inverse, not 1 over, Rounding to a decimal place, Reading [0, 2π), Reference angle, Principal values, A full turn lands on the same point
- Signs by quadrant. All Silver Tea Cups: all three positive in Quadrant I, Sine in II, Tangent in III, Cosine in IV. Example: a point in Quadrant III has negative sine and negative cosine, so its tangent is positive.
- sin⁻¹ means the inverse, not 1 over. sin⁻¹(0.6) is the angle whose sine is 0.6, about 0.6435. The number is a different thing, about 1.7710.
- Rounding to a decimal place. Look at the first digit you drop: 5 or more, raise the last kept digit by one; 4 or less, leave it. To four decimal places 2.4980915 becomes 2.4981; to the nearest tenth 14.4775 becomes 14.5.
- Reading [0, 2π). The square bracket keeps 0; the round bracket leaves out 2π, which lands on the same point as 0. So each point of the circle is counted once: 0 ≤ t < 2π.
- Reference angle. The angle from 0 to between the terminal side and the x-axis: acute off the axes, and 0 or for an angle on an axis. Example: has reference angle π − = .
- Principal values. sin⁻¹ answers in [−, ], cos⁻¹ in [0, π], tan⁻¹ in (−, ). Example: cos⁻¹(−) = , an angle past , while sin⁻¹(−) = −, a negative angle.
- A full turn lands on the same point. Adding 2π (or 360°) brings an angle back to the same point of the circle. Example: −0.4115 + 2π ≈ 5.8717.
3 Why
A key must print one number, so sin⁻¹ is the inverse function of sine on its restricted domain [−, ]: the inverse sine, giving one principal value. The equation sin t = 0.6 asks for more: every angle in a full turn with sine 0.6. Sine is the height of a point on the unit circle, and a level line at height 0.6 cuts the circle twice, at mirror images across the vertical axis. The mirror of α stops α short of a half turn: π − α. The mode matters because one angle has two names, 36.87° and 0.6435 radians, and the calculator prints the name its mode asks for.
4 The rule
The and keys (arcsin, arccos and arctan: the inverse sine, inverse cosine and inverse tangent) give only the principal value: k in k in k in , named in the units the mode is set to.
On and have two solutions when , one when or , and none when or k > 1; has two for every k. With the reference angle the key pressed on |k|, the solutions are the angles among and (in degrees ) that lie in the quadrants where the function has the sign of k. When k is 0, for any of the three, or when k is 1 or for sine or cosine, the answers sit on the axes, in no quadrant: keep each of those candidates in that solves the equation ( at 0 and at and at 0 and ).
The same idea, five ways
Sine of t equals 0.6 on one full turn has two answers: the one the calculator shows, about 0.64, and its twin, pi minus that, about 2.50.
The calculator gives only the principal value, sin⁻¹(0.6) ≈ 0.6435; the equation sin t = 0.6 on [0, 2π) has two solutions, that value and π − sin⁻¹(0.6) ≈ 2.4981.
- sin t = 0.6 and 0 ≤ t < 2π
- t = sin⁻¹(0.6) or t = π − sin⁻¹(0.6)
- t ≈ 0.6435 or t ≈ 2.4981
- {t | sin t = 0.6 and 0 ≤ t < 2π} = {sin⁻¹(0.6), π − sin⁻¹(0.6)}
A Ferris wheel seat passes each height strictly between its lowest and highest points twice per turn, going up and coming down; the calculator reports only the trip up.
The same idea, other ways
On the unit circle, sine is the height of the point. Draw a level line at height 0.6. It cuts the circle at two points: one in Quadrant I, at t ≈ 0.6435, and its mirror image across the vertical axis in Quadrant II, at t ≈ 2.4981. The calculator shows only the Quadrant I point.
On a day when the sun rises and sets, it climbs to one midday peak and sinks again, so it passes each height between the horizon and that peak twice, once in the morning and once in the afternoon, about equally far from the moment it is highest; the peak itself comes only once. A friend who only ever thinks about mornings tells you the morning time and stops. The calculator is that friend. You supply the afternoon time yourself, by mirroring across the middle of the day.
Press sin(0.6435) and sin(2.4981): both show about 0.6. Two different angles, one sine. The sin⁻¹ key can print only one number, and it prints 0.6435 because only that one lies in its range, [−, ], which runs from about −1.5708 to 1.5708.
One key press, one answer. One full turn, two answers: for sine and cosine when the number is strictly between −1 and 1, and for tangent always. When a question says [0, 2π), check the number first: strictly between −1 and 1, or any number for tangent, means two answers, so go find the second; 1 or −1 means one; past them, none.
A thermometer can show one temperature as 68 in Fahrenheit or 20 in Celsius. An angle works the same way: sin⁻¹(0.6) prints about 36.87 in degree mode and about 0.6435 in radian mode, two names for one angle. The mode switch decides which name the calculator prints, and the calculator cannot guess which name your question wants.
| Equation on [0, 2π) | The key on k shows | Quadrants of the answers | The two answers, with α = the key on |k| |
|---|---|---|---|
| sin t = k, 0 < k < 1 | α, in Quadrant I | I and II | α and π − α |
| −α, a negative angle | III and IV | π + α and 2π − α | |
| cos t = k, 0 < k < 1 | α, in Quadrant I | I and IV | α and 2π − α |
| π − α, in Quadrant II | II and III | π − α and π + α | |
| tan t = k, k > 0 | α, in Quadrant I | I and III | α and π + α |
| tan t = k, k < 0 | −α, a negative angle | II and IV | π − α and 2π − α |
5 How
- Read the units in the question: π or [0, 2π) means radians; a degree sign, as in [0°, 360°), means degrees. Set that mode in the calculator's mode or setup menu.
- Test the mode with one press: sin⁻¹(1). Radian mode shows 1.570796327, which is ; degree mode shows 90.
- Find the inverse key: sin⁻¹, cos⁻¹ and tan⁻¹ are usually printed above sin, cos and tan, so press 2nd or SHIFT first. The x⁻¹ key is a different key: it means 1 over a number.
- Type the number in parentheses and press enter. In radian mode sin⁻¹(0.6) shows 0.6435011088: one angle, the principal value.
- Keep every digit: write the next step into the same line, such as π − sin⁻¹(0.6), or use the answer key. Use the π key, never 3.14.
- Round only the final answer, to the place the question asks for (if it does not say, four decimal places is a common choice), and write ≈ to show it is rounded.
Every solution of sin t = k, cos t = k or tan t = k on [0, 2π)
- Read the units and set the mode: π or [0, 2π) means radians, a degree sign means degrees. Test with sin⁻¹(1).
- For sine or cosine, check that −1 ≤ k ≤ 1. If k is outside, write no solution and stop.
- Find the reference angle α: press the inverse key on |k|, the number without its minus sign. Keep every digit.
- Name the two quadrants from the sign of k, using All Silver Tea Cups. If k is 0, or 1 or −1 for sine or cosine, there are no quadrants to name: the answers sit on the axes.
- Write each answer from α: Quadrant I, α; Quadrant II, π − α; Quadrant III, π + α; Quadrant IV, 2π − α (in degrees 180° − α, 180° + α, 360° − α). When k is 0, or 1 or −1 for sine or cosine, the answers sit on the axes: keep each different angle among α, π − α, π + α and 2π − α that lies in [0, 2π) and solves the equation.
- If the answers came from the key, round only now and write ≈; exact answers keep =. Check: press sin, cos or tan of each answer and see k, up to rounding.
6 Worked example
Worked example
Solving tan θ = 1.8 on [0°, 360°): the key gives one angle, and the second is 180° later
Solve tan θ = 1.8 on [0°, 360°). Round each answer to the nearest tenth of a degree.
Show the steps and the answer
- Read the units. The interval has a degree sign, so set the calculator to degree mode in its mode or setup menu.The inverse keys answer in whatever units the mode is set to. In radian mode tan⁻¹(1.8) would show 1.063697822, which is a radian measure, but the question asks for degrees.
- Test the mode with one press: . The screen shows 90.90 is the degree measure of the angle whose sine is 1, so the mode is right. If the screen showed 1.570796327, which is , the calculator would still be in radian mode.
- Count the solutions before computing. On has two solutions for every k, so has two, even though 1.8 > 1.Sine and cosine stay between −1 and 1, so sin θ = 1.8 would have no solution. Tangent takes every real value. The key shows only one angle, so the work is not finished when the screen gives its answer.
- Press SHIFT (or 2nd) and then tan to get . Type (1.8) and press enter. The screen shows 60.9453959. Call this angle .tan⁻¹ is printed above tan as a second function. The x⁻¹ key is a different key: it would give ≈ 0.5555555556, which is a reciprocal, not an angle. Because 1.8 is positive, the principal value is also the reference angle, α = tan⁻¹(|k|).
- Pick the quadrants. in Quadrants I and III, so the solutions are and .For the point (x, y) on the unit circle, tan θ = . This is positive when x and y have the same sign, which happens in Quadrants I and III. Of α, 180° − α, 180° + α and 360° − α, only α and 180° + α lie in those quadrants. The angle 180° − α is in Quadrant II, where tan θ = −1.8.
- Right after the line, type Ans. The screen shows 240.9453959.Ans holds every digit of α, so no rounding enters from retyping. The key alone can never show this angle, because tan⁻¹ answers only between −90° and 90°. The point at 180° + α is directly opposite the point at α. Its coordinates are (−x, −y), and = = 1.8.
- Round only now, to the nearest tenth of a degree: and .The question asks for tenths. In both unrounded values the hundredths digit is 4, so both round down. Rounding once, at the end, keeps the answers accurate, and ≈ shows that they are rounded.
Work to write
- Degree mode: sin⁻¹(1) shows 90
- tan θ = k has two solutions on [0°, 360°) for every k
- α = tan⁻¹(1.8) ≈ 60.9453959°
- tan θ > 0 in Quadrants I and III, so θ = α or θ = 180° + α
- 180° + α ≈ 240.9453959°
- θ ≈ 60.9° or θ ≈ 240.9°
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Rung 1: almost trivial, reading the mode from one key press
You press sin⁻¹(1) and the screen shows 90. Which mode is the calculator in, and what would the screen show in the other mode?
Show the steps and the answer
- Say what it asks: is the angle in whose sine is 1. The number on the screen names that angle in the calculator's current units.The angle itself never changes; only its name changes with the mode, so the number reveals the mode.
- Find the angle: sine is 1 only at the top of the unit circle, a quarter turn from the start.Sine is the height of the point, and the highest point of a circle of radius 1 has height 1.
- Name a quarter turn both ways: in degrees, in radians.A full turn is 360° or 2π, and a quarter of each is 90° or .
- The screen shows 90, so the calculator is in degree mode.In radians a quarter turn is about 1.57, nowhere near 90.
- Degree mode.
- In radian mode the screen would show 1.570796327, which is .
Rung 2 of 7
Rung 2: one key press, rounded two ways
Find tan⁻¹(2.5) in degrees, rounded to the nearest tenth of a degree, and in radians, rounded to four decimal places.
Show the steps and the answer
- Say what it asks: the one angle between and whose tangent is 2.5, named first in degrees and then in radians.tan⁻¹(2.5) is one value of the inverse tangent. No interval such as [0, 2π) is given, so no second answer is wanted.
- Set degree mode and test: shows 90. Press : the screen shows 68.19859051.The first answer is wanted in degrees, and the key returns the principal value, a Quadrant I angle because 2.5 is positive.
- Round to the nearest tenth: .In 68.19859051 the digit after the tenths place is 9, which is 5 or more, so the 1 in the tenths place goes up to 2.
- Set radian mode and test: shows 1.570796327. Press : the screen shows 1.19028995.It is the same angle, now named in radians.
- Round to four decimal places: 1.1903.In 1.19028995 the fifth decimal digit is 8, so the fourth decimal digit, 2, goes up to 3.
- tan⁻¹(2.5) ≈ 68.2°
- tan⁻¹(2.5) ≈ 1.1903 radians
Rung 3 of 7
Rung 3: two answers for a positive sine, in degrees
Solve sin θ = 0.25 on [0°, 360°). Round each answer to the nearest tenth of a degree.
Show the steps and the answer
- Say what it asks: every angle from up to but not including whose sine is 0.25.A full turn is wanted, so expect two answers.
- Set degree mode and test: shows 90. Check that 0.25 is between and 1.The interval is written in degrees, and a sine between −1 and 1 has angles to find.
- Press : the screen shows 14.47751219. Call it .0.25 is positive, so the principal value is a Quadrant I angle: the reference angle.
- Sine is positive in Quadrants I and II.The point is above the x-axis there (All Silver Tea Cups: All in I, Sine in II).
- Quadrant I: . Quadrant II: .In degrees a half turn is 180°, and the mirror image across the vertical axis stops α short of it.
- Round to the nearest tenth: and .In 14.47751219 the digit after the tenths place is 7, so the 4 goes up to 5. In 165.52248781 that digit is 2, so the 5 stays.
- θ ≈ 14.5°
- θ ≈ 165.5°
Rung 4 of 7
Rung 4: two answers for a positive cosine, a different mirror
Solve cos t = 0.3 on [0, 2π). Round each answer to four decimal places.
Show the steps and the answer
- Say what it asks: every angle t in one full turn, from 0 up to but not including , whose cosine is 0.3.Cosine is the left-right position of the point on the unit circle, and a full turn passes the position 0.3 twice.
- Set radian mode and test: shows 1.570796327. Check that 0.3 is between and 1.The interval uses π, and a cosine between −1 and 1 has angles to find.
- Press : the screen shows 1.266103673. Call it .0.3 is positive, so the principal value, which lies in [0, π], is in Quadrant I: it is the reference angle.
- Cosine is positive in Quadrants I and IV.The point is right of the vertical axis there (All Silver Tea Cups: Cosine in IV).
- Quadrant I: . Quadrant IV: type , which shows 5.017081634.Mirroring the point across the x-axis keeps its left-right position 0.3, and the mirror stops α short of a full turn: 2π − α. The sine pattern π − α would mirror across the vertical axis and give cosine −0.3.
- Round to four decimal places: 1.2661 and 5.0171.In 1.266103673 the fifth decimal digit is 0, so 1.2661 stays. In 5.017081634 the fifth decimal digit is 8, so the 0 before it goes up to 1.
- t ≈ 1.2661
- t ≈ 5.0171
Rung 5 of 7
Rung 5: a negative sine, where the calculator's answer is outside the interval
Solve sin t = −0.4 on [0, 2π). Round each answer to four decimal places.
Show the steps and the answer
- Say what it asks: every angle t in one full turn, from 0 up to but not including , whose sine is , a height below the center.A full turn is wanted, so expect two answers, both below the x-axis.
- Set radian mode and test: shows 1.570796327. Check that is between and 1.The interval uses π, and a sine between −1 and 1 has angles to find.
- Notice what shows: . It is negative, so it is not in at all.The principal value of sin⁻¹ for a negative number is a clockwise angle between − and 0.
- Find from the positive number: shows 0.4115168461.The reference angle is acute and positive, and the key on |k| = 0.4 gives it directly.
- Sine is negative in Quadrants III and IV.The point is below the x-axis there; sine is positive only in Quadrants I and II.
- Quadrant III: type , which shows 3.553109500. Quadrant IV: type , which shows 5.871668461.π + α goes α past a half turn, landing below the x-axis on the left; 2π − α stops α short of a full turn, landing below the x-axis on the right.
- Round to four decimal places: 3.5531 and 5.8717.In 3.553109500 the fifth decimal digit is 0, so 3.5531 stays. In 5.871668461 the fifth decimal digit is 6, so the 6 before it goes up to 7.
- t ≈ 3.5531
- t ≈ 5.8717
Rung 6 of 7
Rung 6: a negative cosine, where the calculator's answer is not the reference angle
Solve cos θ = −0.7 on [0°, 360°). Round each answer to the nearest tenth of a degree.
Show the steps and the answer
- Say what it asks: every angle from up to but not including whose cosine, the left-right position on the unit circle, is .A full turn is wanted, so expect two answers, both left of the vertical axis.
- Set degree mode and test: shows 90. Check that is between and 1.The interval is in degrees, and a cosine between −1 and 1 has angles to find.
- Notice what shows: 134.427004. It is one answer, but it is not the reference angle, because it is bigger than .The principal value of cos⁻¹ lies in [0°, 180°], and a negative input lands past 90°, in Quadrant II.
- Find from the positive number: shows 45.572996.The reference angle is acute, and the key on |k| = 0.7 gives it directly.
- Cosine is negative in Quadrants II and III.The point is left of the vertical axis there (All Silver Tea Cups: cosine is positive only in I and IV).
- Quadrant II: . Quadrant III: .180° − α stops α short of a half turn; 180° + α goes α past it. The Quadrant II answer matches the calculator's 134.427004, as it should.
- Round to the nearest tenth: and .In 134.427004 the digit after the tenths place is 2, so 134.4 stays. In 225.572996 that digit is 7, so the 5 goes up to 6.
- θ ≈ 134.4°
- θ ≈ 225.6°
Rung 7 of 7
Rung 7: the hardest, a negative tangent
Solve tan t = −2 on [0, 2π). Round each answer to four decimal places.
Show the steps and the answer
- Say what it asks: every angle t in one full turn, from 0 up to but not including , whose tangent is .A full turn is wanted, and tan t = k has two answers in a full turn for every k.
- Set radian mode and test: shows 1.570796327. Skip the to 1 check.Tangent is , a slope, and a slope can be any real number, so tan t = k always has answers.
- Notice what shows: . It is negative, so it is outside .The principal value of tan⁻¹ lies in (−, ), and a negative input gives a clockwise angle.
- Find from the positive number: shows 1.107148718.The key on the positive number gives the acute reference angle.
- Tangent is negative in Quadrants II and IV.Tangent is . In Quadrant II, y is positive and x negative; in Quadrant IV, y is negative and x positive. A positive divided by a negative, or a negative divided by a positive, is negative.
- Quadrant II: type , which shows 2.034443936. Quadrant IV: type , which shows 5.176036589.π − α stops α short of a half turn; 2π − α stops α short of a full turn.
- Round to four decimal places: 2.0344 and 5.1760.In 2.034443936 the fifth decimal digit is 4, so 2.0344 stays. In 5.176036589 the fifth decimal digit is 3, so 5.1760 stays; write the final 0 to show four places.
- t ≈ 2.0344
- t ≈ 5.1760
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- One-press mode test: sin⁻¹(1) shows 90 in degree mode and 1.570796327 in radian mode. Do it every time you pick up the calculator.
- Size check: answers on [0, 2π) lie between 0 and 6.2832, and answers on [0°, 360°) between 0 and 360. A radian answer like 36.87 means the calculator is in degree mode.
- Twin check: two cosine answers always add to 2π (360°); two tangent answers always differ by π (180°); two sine answers add to π (180°) when k is positive and to 3π (540°) when k is negative.
- Memory cue for the four positions, going around from Quadrant I: α, then half minus (π − α), half plus (π + α), full minus (2π − α).
- Press the inverse key on the positive number |k| every time. The result is always the reference angle, an angle from 0 to , which keeps the quadrant rule the same for sine, cosine and tangent.
- What to write down: the reference angle, the quadrants with the reason, and every answer: with = when it is exact, such as t = , and with ≈ and the rounding place when it is rounded, such as t ≈ 2.4981 (four decimal places).
7 The trap
The one-answer trap. Writing only the calculator's number, t ≈ 0.6435, for sin t = 0.6 on [0, 2π). The key gives one principal value, but the circle has a second point at the same height. Whenever a question asks for every solution on a full turn, expect sin t = k and cos t = k to have two answers when k is strictly between −1 and 1, one when k is 1 or −1, and none beyond, and tan t = k to have two for every k; find the twin with the quadrant rule.
The mode trap. Pressing the key in the wrong mode. In degree mode sin⁻¹(0.6) shows 36.87, which cannot be a radian answer on [0, 2π) because it is bigger than 2π ≈ 6.2832. Match the mode to the question (π means radians, a degree sign means degrees) and test with sin⁻¹(1) before you start.
Flash cards
Say the answer out loud, then flip.
Why does the sin⁻¹ key show only one angle?
What one press tells you whether the calculator is in degrees or radians?
- Press sin⁻¹(1).
- Radian mode shows 1.570796327, which is .
- Degree mode shows 90.
On [0, 2π), how many solutions does sin t = k have?
- Two when −1 < k < 1: a level line at height k cuts the unit circle twice.
- One when k = 1 or k = −1: the line touches the circle only at the top or the bottom.
- None when k < −1 or k > 1: the line misses the circle.