5. Cofunctions: change the partner and subtract the angle
Quick review (2 minutes)
Imagine looking at the same ladder from its two pointed corners.
Rule: Wherever both sides are defined: sin x = cos( − x), cos x = sin( − x), tan x = cot( − x), cot x = tan( − x), sec x = csc( − x), and csc x = sec( − x). For degree angles, replace with 90° throughout.
1. Choose the partner: sine with cosine, tangent with cotangent, or secant with cosecant.
2. Use 90° for degree angles and for radian angles.
3. Subtract the old angle from that quarter turn. For radian fractions, make the denominators match first.
4. Write the partner at the resulting angle. Keep any negative result.
5. Add the old and new arguments to check their quarter turn sum. Check that both functions are defined.
Choose the function's partner.
Subtract the old angle from the quarter turn in the same unit.
Keep the sign, check the sum, and check the denominator.
The figure shows the angle radians, which is 144°, in standard position. Use a cofunction identity to rewrite sec() as the cosecant of a single angle in radians. Write that angle as a fraction of π in lowest terms. Show the subtraction with matching denominators. Then check that the old and new angles add to a quarter turn and that both functions are defined.
sec() = csc(−)
Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.
Sine
Pronounced syne. The height coordinate of a point on the unit circle; its graph begins at the middle and rises for small positive inputs.
Cosine
Pronounced KOH-syne. The sideways coordinate of a point on the unit circle; its graph begins at the top and falls for small positive inputs.
Coordinate
Pronounced koh-OR-duh-nut. One number describing a point's position along an axis.
x-axis
Pronounced eks AK-sis. The horizontal axis. Function inputs are read along it, and every point on it has y = 0.
y-axis
Pronounced why AK-sis. The vertical axis. Outputs are measured along it, and every point on it has x = 0.
Radian
Pronounced RAY-dee-un. An angle unit measuring signed rim distance divided by positive radius. Ordinary arc length divided by radius gives the angle's magnitude; π radians is 180°.
Unit circle
Pronounced YOO-nit SUR-kul. The circle centered at the origin with radius 1; its point after angle θ is (cos θ, sin θ).
A
Pronounced ay. The outside coefficient multiplying sine or cosine. Its size changes height and its sign can reverse the wave.
Reflection
Pronounced ree-FLEK-shun. A mirror flip of a graph. Negative A flips vertically across the x-axis; negative ω flips horizontally across the y-axis.
Cofunctions
Pronounced KOH-funk-shunz. The partner pairs sine/cosine, tangent/cotangent, and secant/cosecant; each matches its partner at the quarter-turn-minus-angle argument where defined.
Complementary angles
Pronounced kom-pluh-MEN-tuh-ree ANG-gulz. Two angles whose measures add to 90°, or radians. A cofunction argument can be negative beyond the acute-angle picture.
Tangent
Pronounced TAN-junt. Sine divided by cosine where cosine is not zero; abbreviated tan.
Cotangent
Pronounced koh-TAN-junt. Cosine divided by sine where sine is not zero; abbreviated cot and paired with tangent as a cofunction.
Secant
Pronounced SEE-kant. One divided by cosine wherever cosine is not zero; abbreviated sec and paired with cosecant as a cofunction.
Cosecant
Pronounced koh-SEE-kant. One divided by sine wherever sine is not zero; abbreviated csc and paired with secant as a cofunction.
Identity
Pronounced eye-DEN-tih-tee. An equation true for every input where its two sides are defined.
Undefined
Pronounced un-dih-FYND. Having no assigned value, such as when a function's formula would require division by zero.
Reciprocal
Pronounced ree-SIP-ruh-kul. One divided by a nonzero number; for a nonzero fraction, exchange top and bottom.
Ratio
Pronounced RAY-shee-oh. One quantity divided by another, comparing their sizes.
Quarter turn
Pronounced KWOR-ter turn. One fourth of a full circle turn, equal to 90° or radians.
Quadrant
Pronounced KWOD-runt. One of the four regions made by the coordinate axes, numbered counterclockwise from the upper right.
Right triangle
Pronounced rite TRY-ang-gul. A triangle with one 90° angle. Its other two angles together use the remaining 90°.
Hypotenuse
Pronounced hy-POT-uh-noos. The longest side of a right triangle, across from its 90° angle.
Clockwise
Pronounced KLOK-wise. Turning in the direction a clock's hands move; from the rightmost circle point, the first motion is downward.
Counterclockwise
Pronounced kown-ter-KLOK-wise. Turning opposite a clock's hands; from the rightmost circle point, the first motion is upward.
SOH CAH TOA
Pronounced soh kah toh-uh. A memory phrase for sine as opposite over hypotenuse, cosine as adjacent over hypotenuse, and tangent as opposite over adjacent.
Degree
Pronounced duh-GREE. An angle unit defined by convention as one of 360 equal parts of a full turn. The ° sign distinguishes degrees from radians.
Terminal side
Pronounced TER-mih-nul side. The ray where an angle's turn finishes.
Numerator
Pronounced NOO-muh-ray-ter. The top of a fraction.
Denominator
Pronounced dih-NOM-uh-nay-ter. The bottom of a fraction; it must be nonzero.
Rationalizing
Pronounced RASH-uh-nuh-ly-zing. Rewriting an equivalent fraction to remove a square root from its denominator.
1 In plain words
Imagine looking at the same ladder from its two pointed corners. From the floor corner, the wall is across from you. From the wall corner, the floor is across from you. The corners add to 90°, and the two legs trade jobs. That trade creates Cofunctions, three pairs of trig functions that give the same value at matching angles. Sine pairs with cosine, tangent with cotangent, and secant with cosecant. To change partners, subtract the old angle from a quarter turn. Use 90° for degrees or for radians. The result may be negative; the identity works wherever both functions are defined.
Explain it like I am five
Picture a ladder leaning against a wall. With the floor it makes a right triangle, a triangle with one square corner of 90°. The two pointed corners share the other 90°: if the floor corner is 35°, the top corner is 90° − 35° = 55°.
Stand at the floor corner. The wall height is opposite you, so sin 35° = , by SOH: opposite over hypotenuse, the ladder. Now stand at the top corner. The same wall height is adjacent, next to you, so cos 55° = , by CAH. Same fraction, so sin 35° = cos 55°; a calculator gives about 0.5736 for both. This swap gives the cofunction pairs: sine and cosine, tangent and cotangent, secant and cosecant. The co means complement: the two angles add to 90°.
The rule: switch to the partner and replace the angle x by − x in radians, or 90° − x in degrees. Example: tan() = cot( − ). With a common bottom, − = , so tan() = cot().
2 Picture it
tan x = cot( − x); cot x = tan( − x)
sec x = csc( − x); csc x = sec( − x)
Use 90° in degrees. Both sides must be defined.
Reminder
Reminder: Degrees and radians, Common denominators, Signed subtraction, SOH CAH TOA, Quotients and reciprocals, Rationalizing, Quadrant signs
- Degrees and radians. 90° and name the same quarter turn, but each subtraction needs one unit: − uses radians.
- Common denominators. = and = , giving difference −.
- Signed subtraction. 90 − 110 = −20. Subtracting a negative reverses that move: 90 − (−20) = 110.
- SOH CAH TOA. Sine is opposite over hypotenuse, cosine is adjacent over hypotenuse, and tangent is opposite over adjacent. sin 30° = .
- Quotients and reciprocals. tan θ = , cot θ = , sec θ = , and csc θ = . At 45°, sec and csc both equal .
- Rationalizing. = after multiplying top and bottom by .
- Quadrant signs. In Quadrant II sine is positive and cosine negative, so cotangent is negative; at an axis is undefined.
3 Why
A triangle's angles total 180°. The right angle uses 90°, leaving 90° for the two acute angles. Changing corners exchanges opposite and adjacent while keeping the hypotenuse. Thus opposite over hypotenuse at one corner equals adjacent over hypotenuse at the other. The other pairs follow from the same exchange. Beyond triangle angles, the unit circle gives the same exchange: the point at − x has coordinates (sin x, cos x). Swapping those coordinates produces the identities. A zero denominator still has no value, so an identity cannot turn an undefined expression into a number.
4 The rule
Wherever both sides are defined: , and .
For degree angles, replace with throughout.
The same idea, five ways
switch to the cofunction and subtract the old angle from a quarter turn.
A function of an angle equals its cofunction at the complementary argument, wherever both expressions have values.
- α + β = 90°
- sin α = cos β
- tan α = cot β
- sec α = csc β
From the other ladder corner, across from and next to exchange jobs.
The same idea, other ways
From the floor corner, sine is wall height over ladder length. From the wall corner, cosine is the same wall height over ladder length. The same fraction has two names at complementary angles.
30° and 60° add to 90°. sin 30° = cos 60° = . tan 30° = cot 60° = . The same triangle sides supply each matching ratio.
At angle x the unit circle point is (cos x, sin x). Reflect it across the diagonal where the two coordinates are equal. This changes angle x to − x and swaps the coordinates. Its horizontal coordinate is now sin x and its vertical coordinate is now cos x. This argument includes negative and larger angles. Reflection across the diagonal sends the rightward axis to the upward axis and reverses counterclockwise turning to clockwise turning. Starting at and turning clockwise by x therefore gives the reflected signed angle − x. This also applies to negative or larger turns. The argument follows from the changed direction as well as the swapped coordinates.
At x: (cos x, sin x)
At − x: (sin x, cos x)
The coordinates exchange jobs.
Part 1: Sine and cosine
A right triangle's two acute corners are Complementary angles because their sum is 90°. A leg opposite one corner is adjacent to the other. Dividing the same leg by the unchanged hypotenuse gives sine from the first corner and cosine from the second. At general angles, the unit circle's coordinate exchange gives the same relation.
- Rule: sin x = cos( − x) and cos x = sin( − x).
- Rule: In degrees the new argument is 90° − x.
- Rule: Sine and cosine exist at every real angle.
Reminder
Reminder: Complement arithmetic
- Complement arithmetic. 27° + β = 90° becomes β = 63° after subtracting 27°; 27° + 63° checks it.
The same idea, five ways
sine becomes cosine at the quarter turn minus the old angle.
Sine and cosine exchange when their arguments total a quarter turn.
- sin α = cos β
- cos α = sin β
One leg is across from one corner and beside the other.
Worked example
Change cosine to sine in degrees
Rewrite cos 27° as sine of another angle. Find an equal partner expression, not a decimal.
Show the steps and the answer
- Choose sine and set .The partner argument must complete the quarter turn.
- .Subtract the old angle to find the new one.
- Put it back: .This verifies the argument.
- .The cofunction identity applies, and both expressions are defined.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- switch both the function name and the argument.
Part 2: Tangent and cotangent
Tangent compares opposite with adjacent. Cotangent reverses that comparison at the same corner. Moving to the other acute corner also swaps the legs' names. The two reversals cancel, making tangent at one corner equal to cotangent at the complementary corner. At general angles use the coordinate fractions and remember that a zero denominator gives an Undefined expression.
- Rule: tan x = cot( − x) and cot x = tan( − x), wherever defined.
- Rule: tan x = and cot x = .
- Rule: Tangent needs nonzero cosine; cotangent needs nonzero sine.
Reminder
Reminder: Division by zero
- Division by zero. = 0, but is undefined. Check the bottom.
The same idea, five ways
tangent pairs with cotangent at the complementary argument.
Changing corners and reversing the leg ratio gives the same value.
- tan α = cot β
- cot α = tan β
Swapping labels and reversing the comparison returns the original ratio.
tan α = opposite ÷ adjacent
The other corner exchanges the legs.
cot β uses the original ratio.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- at an axis angle, check the quotient denominator before writing a value.
Part 3: Secant and cosecant
Secant is the reciprocal of cosine, and cosecant is the reciprocal of sine. A reciprocal divides 1 by the original number. Equal nonzero cosine and sine values have equal reciprocals. The triangle gives the same explanation: hypotenuse over adjacent at one corner becomes hypotenuse over opposite at the other. If the original value is zero, its reciprocal is undefined.
- Rule: sec x = csc( − x) and csc x = sec( − x), wherever defined.
- Rule: sec x = and csc x = .
- Rule: Zero has no reciprocal.
Reminder
Reminder: Reciprocals
- Reciprocals. 1 ÷ = 2, but zero has no reciprocal.
The same idea, five ways
secant pairs with cosecant at the quarter turn minus the old angle.
Equal nonzero sine and cosine values have equal reciprocals.
- sec α = csc β
- csc α = sec β
Turn equal nonzero fractions upside down and they stay equal.
cos α = sin β
sec α = csc β, when defined
Worked example
A negative cosecant partner argument
Rewrite csc() as secant of another angle. A negative complementary argument is allowed.
Show the steps and the answer
- Set .This finds the missing secant argument.
- .Common tenths allow subtraction, giving a negative result.
- Put it back: .This verifies the argument.
- .The first angle has nonzero sine in Quadrant II, and the second has nonzero cosine in Quadrant IV.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- check the underlying cosine for secant and sine for cosecant before taking a reciprocal.
5 How
- Choose the partner: sine with cosine, tangent with cotangent, or secant with cosecant.
- Use 90° for degree angles and for radian angles.
- Subtract the old angle from that quarter turn. For radian fractions, make the denominators match first.
- Write the partner at the resulting angle. Keep any negative result.
- Add the old and new arguments to check their quarter turn sum. Check that both functions are defined.
Fill a cofunction angle blank
- Choose the function's partner.
- Subtract the old angle from the quarter turn in the same unit.
- Keep the sign, check the sum, and check the denominator.
6 Worked example
Worked example
Secant to cosecant when the angle is past a quarter turn
The figure shows the angle radians, which is 144°, in standard position. Use a cofunction identity to rewrite sec() as the cosecant of a single angle in radians. Write that angle as a fraction of π in lowest terms. Show the subtraction with matching denominators. Then check that the old and new angles add to a quarter turn and that both functions are defined.
Show the steps and the answer
- Choose the partner. Secant pairs with cosecant, so the answer will have the form csc(new angle).The cofunction pairs are sine with cosine, tangent with cotangent, and secant with cosecant. The rule sec x = csc( − x) turns a secant into a cosecant.
- Use the quarter turn : . is a radian measure, so the quarter turn must be in radians too. The 144° in the figure is the same angle, but 90° − would mix degrees with radians.
- Make the denominators match: and .Fractions can be subtracted only over a common denominator. 10 is the least common multiple of 2 and 5, so multiply the top and bottom of by 5, and the top and bottom of by 2.
- Subtract the old angle from the quarter turn: .The rule is quarter turn minus old angle, in that order. is larger than , and the figure shows the angle already past a quarter turn, so the difference is negative. Reversing the order would give , which has the wrong sign. is in lowest terms because 3 and 10 have no common factor.
- Write the partner at the new angle and keep the sign: .The partner is evaluated at exactly the result of the subtraction, minus sign included. Dropping the sign would change the value. sec() is negative because cosine is negative in Quadrant II. csc() is positive because lies in Quadrant I, where sine is positive.
- Check the quarter-turn sum: .The old and new arguments of a cofunction pair always add to a quarter turn. Getting exactly confirms both the subtraction and its sign.
- Check that both functions are defined. Because , the angle ends inside Quadrant II, off the y-axis, so . Because , the angle ends inside Quadrant IV, off the x-axis, so .The identity holds only where both sides are defined. sec x = needs cos x ≠ 0, and csc x = needs sin x ≠ 0. An angle whose terminal side lies strictly inside a quadrant has nonzero sine and nonzero cosine.
Work to write
- sec() = csc( − )
- sec() = csc(−)
- Check: + (−) = − = =
- cos() ≠ 0 and sin(−) ≠ 0, so both sides are defined
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 6
Degree subtraction
Rewrite sin 18° as cosine. Find the angle in the partner expression.
Show the steps and the answer
- Choose cosine and set .Degrees need a 90° quarter turn.
- .Subtracting isolates the new angle.
- Put it back: .The sum checks the complement.
- .Sine and cosine are the correct pair and both are defined.
Rung 2 of 6
Reciprocal functions in degrees
Rewrite sec 32° as cosecant. Find and check its argument.
Show the steps and the answer
- Choose cosecant and set .Secant pairs with cosecant.
- .This finds the partner angle.
- Put it back: .The sum verifies the argument.
- .Cosine at 32° and sine at 58° are equal and positive, so their reciprocals are defined.
Rung 3 of 6
A radian common denominator
Rewrite cot() as tangent. The partner argument must be in radians.
Show the steps and the answer
- Choose tangent and set .The arguments total a radian quarter turn.
- .Rewrite the quarter turn in tenths, subtract, and reduce by 2.
- Put it back: .This verifies the missing argument.
- .Both acute arguments have nonzero denominators.
Rung 4 of 6
Unequal denominators and a larger numerator
Rewrite cos() as sine. Carry the numerator 2 through the subtraction.
Show the steps and the answer
- Choose sine and set .This finds the complementary sine argument.
- .Both fractions must describe equal sized tenths before subtraction.
- Put it back: .The sum verifies the new argument.
- .Sine and cosine are defined at every real angle.
Rung 5 of 6
A negative radian result
Rewrite cot() as tangent. The old angle is greater than a quarter turn.
Show the steps and the answer
- Choose tangent and set .The identity still uses a quarter turn beyond acute triangle angles.
- .Six twelfths minus seven twelfths leaves a negative twelfth.
- Put it back: .The negative sign is necessary for the required sum.
- .The first angle has nonzero sine in Quadrant II, and the second has nonzero cosine in Quadrant IV.
Rung 6 of 6
A negative reciprocal partner
Rewrite csc 143° as secant. Explain why its negative argument is allowed.
Show the steps and the answer
csc 143° = sec(−53°)
- Choose secant and set .Cosecant pairs with secant at a quarter turn sum.
- .The old angle is 53° beyond the quarter turn.
- Put it back: .This verifies the negative partner argument.
- .Sine in Quadrant II and cosine in Quadrant IV are positive and nonzero here, so both reciprocals exist.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- remember the three pairs, then rebuild the angle by subtraction.
- check that the two arguments add to a quarter turn instead of evaluating unfamiliar trig values.
- keep the six identities on the cheat sheet; individual complement answers can be rebuilt.
- a negative partner argument is expected when the original argument exceeds a quarter turn.
7 The trap
Changing the function name but keeping the old angle, or subtracting radians from 90°. Change name and argument, using one angle unit throughout.
Keep in mind
- Change both the name and the angle: sin 35° = cos 55°, not cos 35°.
- Stay in one unit: subtract degrees from 90° and radians from , never from 90°.
- LHS and RHS mean the left-hand side and the right-hand side of the equals sign: in sin 35° = cos 55°, the LHS is sin 35° and the RHS is cos 55°.
- A cofunction identity, an equation true for every allowed angle, holds only where both sides are defined, because a fraction with 0 on the bottom has no value: 6 ÷ 0 would need a number that times 0 gives 6, and none exists.
Memory hook
Co means complement: a cofunction trades sine for cosine, tan for cot, sec for csc, and trades the angle x for 90° − x.
Flash cards
Say the answer out loud, then flip.
What are the three cofunction pairs?
- sine and cosine
- tangent and cotangent
- secant and cosecant
What does the co in cofunction stand for?
Fill the blank: sin 28° = cos ___
Fill the blank: sec() = csc ___
Fill the blank: cos 125° = sin ___. Is a negative answer allowed?
- −35°, from 90° − 125°
- yes, the identity works for negative angles.