Quarry School

Even and odd: what a minus sign inside does

Subject: MathematicsLeans on: Negative of a negative numberLeans on: PeriodsLeans on: Reciprocals
Level 2 · BuildingAbout 17 min read10 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Imagine walking around a circular track.

    Rule

    An even or odd function has a domain that contains −t whenever it contains t. For every t in that domain, even means f(−t) = f(t), and odd means f(−t) = −f(t). Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd. Even graphs are symmetric about the y-axis, meaning the two sides match when folded across that axis. Odd graphs are symmetric about the origin, meaning a half turn around the origin leaves the graph unchanged.

    Step

    1. 1. Read the negative sign inside the function as an instruction to reverse the input.

    2. 2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.

    3. 3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.

    4. 4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.

    5. 5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.

    6. Read a reference-table entry in the column under its input or category in the matching picture.

    Question

    The terminal point of t = 5π6 on the unit circle is P(−32, 12). Use the even and odd properties of the trigonometric functions to find the exact value of each expression.
    (a) sin(−5π6)
    (b) sec(−5π6)
    (c) cot(−5π6)
    (d) csc(−17π6)

    Answer

    (a) sin(−5π6) = −12 (b) sec(−5π6) = −233 (c) cot(−5π6) = 3 (d) csc(−17π6) = −2

    Trap

    Moving a minus sign outside cosine or secant changes the answer incorrectly. Even functions preserve the positive-input output's sign. Odd functions reverse that output's sign; if the positive-input output is already negative, the result is positive.

    Strategy

    1. 1. Read the negative sign inside the function as an instruction to reverse the input.

    2. 2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.

    3. 3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.

    4. 4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.

    5. 5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.

    Term

    Domain

    Definition

    All the inputs a function accepts. For the trig functions, the inputs are angles, or real numbers t read as radians.

    Term

    Range

    Definition

    All the outputs a function can actually produce.

    Term

    Quadrant

    Definition

    One of the four regions the two axes cut the plane into, numbered I, II, III, IV counterclockwise from the upper right. An angle is in the quadrant that holds its terminal side.

    Term

    Period

    Definition

    The least positive repeat length, when one exists. The six trig functions have least periods; a constant function repeats after any positive shift and has no least positive period.

    Term

    Even function

    Definition

    A function with a domain symmetric about 0 and f(−x) = f(x) for every allowed x. Opposite inputs give equal outputs; the graph is symmetric about the y-axis.

    Term

    Odd function

    Definition

    A function with a domain symmetric about 0 and f(−x) = −f(x) for every allowed x. Opposite inputs give opposite outputs; the graph is symmetric about the origin.

    Term

    Symmetric about the y-axis

    Definition

    The left half of the graph is the mirror image of the right half, folded along the y-axis. The notes write 'symmetric w.r.t. the y-axis', w.r.t. meaning 'with respect to'.

    Term

    Symmetric about the origin

    Definition

    Turning the graph half a turn (180°) about the origin leaves it unchanged: every point (a, b) on it has a partner (−a, −b).

    Term

    Exact value

    Definition

    A value stated without rounding, often written using whole numbers, fractions or square roots. An exact expression keeps the complete value instead of stopping at a rounded decimal.

    Term

    Rationalize the denominator

    Definition

    Rewrite a fraction so no square root remains on the bottom, by multiplying top and bottom by that root. The value stays the same, since you multiply by 1.

    Term

    Sine

    Definition

    Sine reads the unit-circle point's height.

    Term

    Cosine

    Definition

    Cosine reads the unit-circle point's horizontal position.

    Term

    Tangent

    Definition

    Tangent divides height by horizontal position.

    Term

    Cotangent

    Definition

    Cotangent divides horizontal position by height.

    Term

    Secant

    Definition

    Secant is the reciprocal of the horizontal coordinate.

    Term

    Cosecant

    Definition

    Cosecant is the reciprocal of the height coordinate.

    1 In plain words

    Imagine walking around a circular track. You can walk the same distance forward or backward. The two stopping places sit directly above and below each other. Their left or right positions match, but their heights have opposite signs. A negative input −t means reversing the direction of the walk. A function is even when that reversal keeps its output the same. It is odd when the reversal changes the output to its negative. Cosine measures left or right position, so cosine is even. Sine measures height, so sine is odd. The four functions built by dividing or taking reciprocals follow from those two facts. In either definition, the comparison must hold for every allowed input.

    Explain it like I am five

    Picture a tree beside a still lake. Its reflection has the same left-right position but is upside down. On the unit circle a negative angle −t (read 'negative t') walks the same distance clockwise instead of counterclockwise, and it lands on the reflection of the point for t across the x-axis.

    Example: say t ends at the point (0.28, 0.96). Then −t ends at (0.28, −0.96): same x, opposite y. Cosine reads x, so cos(−t) = 0.28 = cos t. Sine reads y, so sin(−t) = −0.96 = −sin t.

    A function f is even when a minus sign inside disappears: f(−t) = f(t), read 'f of negative t equals f of t', like cosine. It is odd when the minus sign comes out front: f(−t) = −f(t), like sine. Secant is 1 divided by cosine, so it is even too. Tangent, cotangent and cosecant each hold exactly one sine, so each flips sign: they are odd.

    2 Picture it

    −π/3π/3−2π−ππ2π−11−π/3π/3−2π−ππ2π−11
    y = cos x.
    −π/3π/3−2π−ππ2π−11
    The same picture again: y = cos x.
    input Functionoutput f(−t) equalssin t−sin tcos tcos ttan t−tan tcot t−cot tsec tsec tcsc t−csc t
    A table of 6 values of f(−t) equals, for Function from sin t to csc t.
    input Functionoutput Reasonsin tP(−t) has the opposite heightcos tP(−t) has the same xtan t(sin(−t))/(cos(−t)) = (−sin t)/(cos t)cot t(cos(−t))/(sin(−t)) = (cos t)/(−sin t)sec t1/(cos(−t)) = 1/(cos t)csc t1/(sin(−t)) = 1/(−sin t)
    A table of 6 values of Reason, for Function from sin t to csc t.
    input Functionoutput Typesin toddcos teventan toddcot toddsec tevencsc todd
    A table of 6 values of Type, for Function from sin t to csc t.

    Reminder

    Reminder: Negative of a negative number, Periods, Reciprocals
    • Negative of a negative number. An outside negative sign reverses the output: −(−12) = 12.
    • Periods. Remove whole 2π periods for sine, cosine, secant and cosecant. Tangent and cotangent allow whole π periods.
    • Reciprocals. Flipping a nonzero fraction keeps its sign: 1 ÷ (−13) = −3.

    3 Why

    If P(t) = (a, b), reflection across the x-axis gives P(−t) = (a, −b). Thus cos(−t) = a = cos t and sin(−t) = −b = −sin t. Dividing the opposite height by the unchanged horizontal coordinate reverses tangent's sign. Dividing the unchanged coordinate by the opposite height reverses cotangent's sign. Taking a reciprocal preserves cosine's equality and sine's sign reversal. Each statement applies where the function is defined; reflection preserves those allowed inputs.

    4 The rule

    An even or odd function has a domain that contains −t whenever it contains t.

    For every t in that domain, even means f(−t)=f(t), and odd means f(−t)=−f(t). Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd. Even graphs are symmetric about the y-axis, meaning the two sides match when folded across that axis. Odd graphs are symmetric about the origin, meaning a half turn around the origin leaves the graph unchanged.

    The same idea, five ways

    Say it

    An even function gives the same output for opposite inputs. An odd function gives opposite outputs for opposite inputs.

    Write it

    Reflecting an even function's graph across the y-axis keeps it unchanged; turning an odd function's graph half a turn about the origin keeps it unchanged.

    In math
    • Even: f(−t) = f(t) for every input t in a domain symmetric about 0.
    • Odd: f(−t) = −f(t) for every input t in a domain symmetric about 0.
    • Even: cos t, sec t.
    • Odd: sin t, csc t, tan t, cot t.
    Like

    Walk the same distance forward and backward on a circular track. Compare the two stopping places.

    See it
    −π/3π/3−2π−ππ2π−11
    Cosine has equal outputs at opposite inputs.

    The same idea, other ways

    As two walks

    Walk t around the circle from the rightmost point. Then walk the same distance backward. You reach (a, b) and (a, −b). Matching horizontal positions explain cosine; opposite heights explain sine.

    x = cos θy = sin θP(−t) = (a, −b)
    Walking backward reflects the stopping point across the x-axis.
    As graph symmetry

    An even graph contains (t, f(t)) and (−t, f(t)). Folding along the y-axis matches those points. An odd graph contains (t, f(t)) and (−t, −f(t)). A half turn about the origin matches those points. These graph pictures follow from the definitions, rather than giving new sign rules.

    (π/6, 1/2)(−π/6, −1/2)−2π−ππ2π−11
    Sine's paired graph points have opposite input and output signs.
    With the fraction definitions

    Start with sin(−t) = −sin t and cos(−t) = cos t. Then tan(−t) = −sintcost = −tan t, while sec(−t) = 1cost = sec t. The same substitutions give odd cotangent and cosecant.

    sin(−t)=−sint

    cos(−t)=cost

    tan(−t)=−tant

    sec(−t) = sec t

    Functionf(−t) equalsReasonType
    sin t−sintP(−t) has the opposite heightodd
    cos tcos tP(−t) has the same xeven
    tan t−tantsin(−t)cos(−t)=−sintcostodd
    cot t−cot tcos(−t)sin(−t)=cost−sintodd
    sec tsec t1cos(−t)=1costeven
    csc t−csc t1sin(−t)=1−sintodd

    Part 1: Sine is odd

    Sine reads the stopping point's height. Reversing the walk reflects that height across 0.

    • sin(−t)=−sint.
    • Sine is an odd function.
    • Its graph is symmetric about the origin.
    −2π−ππ2π−11
    Sine's graph matches itself after a half turn about the origin.

    Worked example

    Sine at a backward quarter turn

    The angle is −90°. Find the sine, which is the stopping point's height.

    Show the steps and the answer
    x = cos θy = sin θ(0, −1)
    The height is −1 after a clockwise quarter turn.
    1. sin(−90°)=−sin90°.Sine is odd.
    2. sin90°=1, so sin(−90°)=−1.The top of the unit circle has height 1.
    Answer
    −1
    Double-check A clockwise quarter turn reaches (0, −1), whose height is −1.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: sin(−t)=sint.
    The reflected point has the opposite height, unless that height is 0.
    ✓ Instead: sin(−t)=−sint.

    Tips and tricks

    • For sine, reverse the height's sign.

    Part 2: Cosine is even

    Cosine reads left or right position. Reversing the walk preserves that horizontal position.

    • cos(−t)=cost.
    • Cosine is an even function.
    • Its graph is symmetric about the y-axis.
    −2π−ππ2π−11
    Cosine reflects onto itself across the y-axis.

    Worked example

    Cosine at opposite sixth-turn inputs

    The input is −π3. Find its cosine.

    Show the steps and the answer
    x = cos θy = sin θx = 1/2
    The negative angle has the same x-coordinate as the positive angle.
    1. cos(−π3)=cosπ3.Cosine is even.
    2. cosπ3=12.The 60° special triangle gives x = 12 on the unit circle.
    Answer
    12
    Double-check The two points have coordinates (12, 32) and (12, −32). Their x-coordinates match.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: cos(−π3)=−12.
    The minus sign belongs to the input. Cosine is even, so its output does not reverse.
    ✓ Instead: cos(−π3)=12.

    Tips and tricks

    • For cosine, preserve the horizontal position.

    Part 3: Tangent is odd

    Tangent divides height by horizontal position. Reversing only the height reverses the quotient.

    • tan(−t)=−sintcost=−tant.
    • Both sides require cos t ≠ 0.
    −ππ−4−224
    Tangent's paired values have opposite signs wherever both are defined.

    Worked example

    Tangent at a negative special angle

    The input is −π6. Find its exact tangent.

    Show the steps and the answer
    x = cos θy = sin θtan t = y ÷ x
    The quotient has a negative top and a positive bottom.
    1. tan(−π6)=−tanπ6.Tangent is odd.
    2. tanπ6=13=33, so the answer is −33.Opposite ÷ adjacent in the 30° triangle gives 13, and multiplying top and bottom by 3 rationalizes it.
    Answer
    −33
    Double-check The original angle is in Quadrant IV. Its sine is negative and its cosine is positive, so the tangent must be negative.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: tan(−t) = tan t because tangent repeats.
    Repeating by π and reflecting the input are different operations. At t = π4, reflection changes 1 to −1.
    ✓ Instead: tan(−t)=−tant;tan(t+π)=tant.

    Tips and tricks

    • Keep odd symmetry separate from period.

    Part 4: Cotangent is odd

    Cotangent divides horizontal position by height. Reversing the height puts one negative sign on the bottom, which reverses the quotient.

    • cot(−t) = cost−sint = −cot t.
    • Both sides require sin t ≠ 0.
    −ππ−4−224
    Cotangent has opposite outputs at opposite allowed inputs.

    Worked example

    Cotangent at a negative eighth-turn input

    The input is −π4. Find its cotangent.

    Show the steps and the answer
    x = cos θy = sin θcot t = x ÷ y
    Equal leg sizes with different signs give cotangent −1.
    1. cot(−π4)=−cotπ4.Cotangent is odd.
    2. cotπ4=cosπ4÷sinπ4=1, so cot(−π4)=−1.The 45° special triangle has equal legs, so their quotient is 1.
    Answer
    −1
    Double-check At −45°, the coordinates have equal magnitudes with x positive and y negative. The quotient x ÷ y is −1.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: A negative sign in the bottom disappears.
    A positive divided by a negative is negative; there is only one sign reversal.
    ✓ Instead: a−b = −ab when b ≠ 0.

    Tips and tricks

    • A negative sign on either side of a fraction gives the fraction one negative sign.

    Part 5: Secant is even

    Secant takes the reciprocal of horizontal position. Since that position stays unchanged, its reciprocal stays unchanged too.

    • sec(−t) = 1cos(−t) = 1cost = sec t.
    • Both sides require cos t ≠ 0.
    −ππ−4−224
    Secant is a mirror image across the y-axis.

    Worked example

    Secant at a negative angle beyond one turn

    The input is −7π3. Find its secant.

    Show the steps and the answer
    60°420°same terminal side
    The positive input reduces from 420° to 60°.
    1. sec(−7π3)=sec7π3.Secant is even.
    2. 7π3−2π=π3, so sec7π3=secπ3.Secant has period 2π.
    3. secπ3=1÷cosπ3=1÷12=2.Secant is the reciprocal of cosine.
    Answer
    2
    Double-check 2 is in secant's range and is positive, as the original Quadrant IV angle requires.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: sec(−t) = −sec t.
    Secant inherits cosine's even symmetry, rather than sine's odd symmetry.
    ✓ Instead: sec(−t) = sec t.

    Tips and tricks

    • Remember cosine and secant as the even pair.

    Part 6: Cosecant is odd

    Cosecant takes the reciprocal of height. Reversing the height reverses the reciprocal's sign.

    • csc(−t) = 1−sint = −csc t.
    • Both sides require sin t ≠ 0.
    −2π−ππ2π−4−224
    Cosecant has origin symmetry wherever it is defined.

    Worked example

    Cosecant at a negative special angle

    The input is −π6. Find its cosecant.

    Show the steps and the answer
    x = cos θy = sin θsin t = −1/2
    Taking the reciprocal of the negative height gives negative cosecant.
    1. csc(−π6)=−cscπ6.Cosecant is odd.
    2. cscπ6=1÷12=2, so the answer is −2.Sine at π6 is 12, and cosecant is its reciprocal.
    Answer
    −2
    Double-check At the original input, sin(−π6) = −12. Its reciprocal is −2 directly.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: csc(−t) = csc t.
    The reciprocal keeps the sign of sine, so it reverses when sine reverses.
    ✓ Instead: csc(−t) = −csc t.

    Tips and tricks

    • Cosecant follows sine, including its sign.

    5 How

    1. 1. Read the negative sign inside the function as an instruction to reverse the input.
    2. 2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.
    3. 3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.
    4. 4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.
    5. 5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.
    6. Read a reference-table entry in the column under its input or category in the matching picture.

    Evaluate a function at a negative input

    1
    Is the function cosine or secant?
    YesUse f(−t) = f(t). Keep the positive-input output, including any sign it already has.
    NoFor sine, cosecant, tangent or cotangent, use f(−t) = −f(t). Keep the outside negative sign.
    ↓
    2
    Is the resulting positive angle one of the known exact angles?
    YesRead its exact value, then apply the outside sign.
    NoReduce by whole periods if possible. If it is still unfamiliar, give a sign or an equivalent expression rather than inventing an exact special value.
    1. Read the negative sign inside the function as an instruction to reverse the input.
    2. Identify the function. Cosine and secant are even. Sine, cosecant, tangent and cotangent are odd.
    3. For an even function, replace f(−t) by f(t). For an odd function, replace f(−t) by −f(t). Write the outside sign immediately.
    4. Evaluate the positive input using a known value. If it still contains extra periods, use the period already taught to reduce it.
    5. Keep the outside sign through every later step. Check that the resulting sign agrees with the terminal point.

    6 Worked example

    Worked example

    Using even and odd identities to evaluate functions of −5π6 and −17π6

    The terminal point of t = 5π6 on the unit circle is P(−32, 12). Use the even and odd properties of the trigonometric functions to find the exact value of each expression.
    (a) sin(−5π6)
    (b) sec(−5π6)
    (c) cot(−5π6)
    (d) csc(−17π6)

    Show the steps and the answer
    x = cos θy = sin θP
    Unit circle with the terminal point P(−32, 12) of t = 5π6 (150°).
    1. Read each minus sign inside the function as reversing the input. A reversed input moves the terminal point from P(−32,12) to its reflection across the x-axis, (−32,−12).Going around the unit circle clockwise instead of counterclockwise by the same amount reflects the point across the x-axis. The x-coordinate stays the same and the y-coordinate changes sign.
    2. Identify each function. Sine, cotangent and cosecant are odd. Secant is even.Cosine and secant are the only even functions among the six. Sine, cosecant, tangent and cotangent are odd.
    3. (a) Write sin(−5π6)=−sin(5π6). The y-coordinate of P gives sin(5π6)=12. So sin(−5π6)=−12.Sine is odd, so f(−t) = −f(t). The outside sign is written right away and kept.
    4. (b) Write sec(−5π6)=sec(5π6)=1cos(5π6). This is 1−32=−23=−233.Secant is even, so f(−t) = f(t) and no sign is added. Its value is the reciprocal of the x-coordinate of P. The denominator is then rationalized.
    5. (c) Write cot(−5π6)=−cot(5π6). From P, cot(5π6)=costsint=−3212=−3. So cot(−5π6)=−(−3)=3.Cotangent is odd, so the outside minus sign is written first. It is then kept while the inside value, which is itself negative, is evaluated.
    6. (d) Write csc(−17π6)=−csc(17π6). Since 17π6=2π+5π6 and cosecant has period 2π,csc(17π6)=csc(5π6)=112=2. So csc(−17π6)=−2.Cosecant is odd, so the outside sign comes first. Next the extra full period 2π is removed, which leaves the known input 5π6.
    7. Check the signs against the terminal points. −5π6 ends in Quadrant III at (−32,−12). Also, −17π6+4π=7π6, which is also in Quadrant III.In Quadrant III, sine, cosecant, cosine and secant are negative, and tangent and cotangent are positive. This matches −12, −233, 3 and −2.
    Answer
    (a) sin(−5π6) = −12 (b) sec(−5π6) = −233 (c) cot(−5π6) = 3 (d) csc(−17π6) = −2
    Double-check Read the values straight from the reflected point (−32, −12) for −5π6. sin = −12. sec = 1−32 = −233. cot = −32−12 = 3. The angle −17π6 is coterminal with 7π6, whose point is (−32, −12), so csc = 1−12 = −2. All four values agree with the answers.

    Work to write

    1. sin is odd: sin(−5π6) = −sin(5π6) = −12
    2. sec is even: sec(−5π6) = sec(5π6) = 1−32 = −233
    3. cot is odd: cot(−5π6) = −cot(5π6) = −(−3) = 3
    4. csc is odd: csc(−17π6) = −csc(17π6) = −csc(5π6) = −2, using period 2π
    5. Sign check: −5π6 and −17π6 both end in Quadrant III, where sin, csc and sec are negative and cot is positive

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 6

    Evaluating cosine at a negative angle using evenness

    Find the exact value of cos(−3π4) using the fact that cosine is an even function.

    Show the steps and the answer
    x = cos θy = sin θP
    Unit circle with the terminal point P of −3π4 (the same position as 225°) at (−22, −22).
    1. Read cos(−3π4) as cosine evaluated at the input 3π4 reversed. The angle is measured 3π4 clockwise from the positive x-axis.A negative sign inside the function reverses the input. It turns the direction of rotation from counterclockwise to clockwise.
    2. Identify the function as cosine, which is even.Cosine and secant are the even trigonometric functions. Sine, cosecant, tangent and cotangent are odd.
    3. Replace cos(−3π4) by cos(3π4). No minus sign is placed outside.For an even function f(−t) = f(t), so reversing the input leaves the output unchanged.
    4. Evaluate cos(3π4). The angle 3π4 lies in Quadrant II with reference angle π4, and its terminal point is (−22,22). So cos(3π4)=−22. No period reduction is needed because 3π4 is already between 0 and 2π.Cosine is the x-coordinate of the terminal point. The known value at π4 is 22, and x is negative in Quadrant II.
    5. Check the sign against the original angle. −3π4 ends in Quadrant III at (−22,−22). Its x-coordinate is negative, which agrees with −22.The sign of the result must match the terminal point of the actual input. Evenness changed no sign, so the negative value comes from the quadrant alone.
    Answer
    cos(−3π4)=−22
    Double-check Reflecting the point P for −3π4 at (−22, −22) across the x-axis gives (−22, 22), which is the point for 3π4. The x-coordinate is unchanged, as an even function requires. Both points have x = −22.

    Work to write

    1. cosine is even, so cos(−t) = cos(t)
    2. cos(−3π4)=cos(3π4)
    3. 3π4 is in Quadrant II with reference angle π4, so cos(3π4) = −22
    4. cos(−3π4)=−22
    5. check: −3π4 ends in Quadrant III, where x < 0

    Rung 2 of 6

    An odd function

    Find sin(−30°). In words, reverse the known sine output.

    Show the steps and the answer
    x = cos θy = sin θy = −1/2
    The original angle has negative height.
    1. sin(−30°)=−sin30°.Sine is odd.
    2. −sin30°=−12.The known sine at 30° is 12.
    Answer
    −12
    Double-check The angle is below the x-axis, so its sine is negative.

    Rung 3 of 6

    Cotangent of a reversed angle with extra periods

    The terminal point of t = π3 on the unit circle is P(12, 32). Use the fact that cotangent is an odd function, together with its period π, to find the exact value of cot(−19π3). Rationalize the denominator.

    Show the steps and the answer
    x = cos θy = sin θP
    Unit circle with the terminal point P(12, 32) of t = π3, which is used to evaluate cot(π3).
    1. Read cot(−19π3) as cotangent evaluated at the input 19π3 taken in the reverse (clockwise) direction.A negative sign inside the function reverses the input. The negative sign does not yet tell us the sign of the output.
    2. Identify the function as cotangent, which is odd.Sine, cosecant, tangent and cotangent are odd, so f(−t) = −f(t).
    3. Write cot(−19π3)=−cot(19π3).For an odd function the minus sign moves outside. We write it immediately so that it is not lost.
    4. Split the input: 19π3=18π3+π3=6π+π3.The remaining input still contains extra periods, and these must be removed before we use a known value.
    5. Reduce: cot(19π3)=cot(π3+6π)=cot(π3).Cotangent has period π, and 6π is six whole periods. Adding whole periods does not change the value.
    6. Evaluate cot(π3)=xy=1/23/2=13=33.Cotangent is the quotient x/y of the terminal point coordinates, and P(12, 32) is the given terminal point for π3. Multiplying the top and bottom by 3 rationalizes the denominator.
    7. Restore the outside sign: cot(−19π3)=−33.The minus sign from the odd property has to be kept through every later step.
    Answer
    cot(−19π3) = −33
    Double-check −19π3 = −6π − π3, so the angle is coterminal with −π3. Its terminal point is the reflection of P across the x-axis, which is (12, −32) in Quadrant IV. In Quadrant IV, x > 0 and y < 0, so cotangent is negative. The direct quotient is x/y = 1/2−3/2 = −13 = −33. This matches the answer.

    Work to write

    1. cot is odd, so cot(−19π3) = −cot(19π3)
    2. 19π3 = 6π + π3 and the period of cot is π, so cot(19π3) = cot(π3)
    3. cot(π3) = 1/23/2 = 33
    4. cot(−19π3) = −33

    Rung 4 of 6

    Even symmetry and a period

    Find sec(−7π3). In words, reverse the input and remove a whole period.

    Show the steps and the answer
    60°420°same terminal side
    The positive input has one extra full turn.
    1. sec(−7π3)=sec7π3.Secant is even.
    2. 7π3−6π3=π3.Secant's period is 2π = 6π3.
    3. secπ3=1÷12=2.Cosine at π3 is 12.
    Answer
    2
    Double-check The original angle reduces by full turns to 5π3, in Quadrant IV, where secant is positive.

    Rung 5 of 6

    Odd symmetry over several periods

    Find cot(−9π4). In words, preserve the outside sign while reducing the positive input.

    Show the steps and the answer
    x = cos θy = sin θcot t = −1
    The equal coordinate sizes have opposite signs.
    1. cot(−9π4)=−cot9π4.Cotangent is odd.
    2. 9π4−2π=9π4−8π4=π4.Two cotangent periods, each π, preserve its value.
    3. −cotπ4=−1.Cosine and sine at π4 are equal and nonzero, so cotangent is 1.
    Answer
    −1
    Double-check The original input is coterminal with 7π4, in Quadrant IV, where cotangent is negative.

    Rung 6 of 6

    The same negative input with an even function

    Find cos(−9π4). In words, compare with the previous rung and notice which sign rule changes.

    Show the steps and the answer
    x = cos θy = sin θcos t > 0
    Cosine is positive while cotangent is negative at the same original input.
    1. cos(−9π4)=cos9π4.Cosine is even, so no outside minus sign is introduced.
    2. 9π4−2π=π4.Cosine has period 2π.
    3. cosπ4=22.The 45° triangle supplies the exact value.
    Answer
    22
    Double-check The original terminal point is in Quadrant IV. Its x-coordinate is positive, matching the answer.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: cos(−t)=−cost.
    Changing the direction of the walk preserves the horizontal coordinate. At t = π3, cosine is 12 at both inputs.
    ✓ Instead: cos(−t) = cos t. Move the minus sign outside only for an odd function.
    ✗ Not this: An even function always has positive outputs.
    Even describes how opposite inputs compare. It does not describe the output's sign. At t = 3π, cosine is −1, and cos(−3π) = −1 too.
    ✓ Instead: An even function has equal outputs at opposite inputs, including equal negative outputs.

    Tips and tricks

    • Memory device: cosine and its reciprocal, secant, are the only even trig functions. The other four are odd.
    • Write the sign change as an equality before computing. A negative sign inside and a negative sign outside mean different things.

    7 The trap

    Moving a minus sign outside cosine or secant changes the answer incorrectly. Even functions preserve the positive-input output's sign. Odd functions reverse that output's sign; if the positive-input output is already negative, the result is positive.

    Keep in mind

    • A minus inside changes the angle and a minus outside flips the answer: with sin t = 0.96, sin(−t) = −0.96, but −sin(−t) = 0.96.
    • A negative angle mirrors across the x-axis, (x, y) to (x, −y); the y-axis mirror, (x, y) to (−x, y), belongs to a different angle, π − t (180° − t in degrees).
    • Even does not mean positive: cos(−3) and cos 3 are both about −0.990.
    • In an identity such as cos(−t) = cos t, LHS means the left-hand side, cos(−t), and RHS the right-hand side, cos t; a proof rewrites one side until it matches the other.

    Memory hook

    Cosine eats the minus sign; sine spits it out. Secant copies cosine; tangent, cotangent and cosecant copy sine.

    Flash cards

    Say the answer out loud, then flip.

    What does 'odd function' mean?
    f(−t) = −f(t) for every allowed t: a minus sign inside comes out front.
    Which trig functions are even, and which are odd?
    • Even: cos, sec.
    • Odd: sin, csc, tan, cot.
    csc t = 4. What is csc(−t)?
    −4, because cosecant is odd.
    P(t) = (−0.96, 0.28). Find cos(−t) and sin(−t).
    • The point for −t is (−0.96, −0.28).
    • cos(−t)=−0.96
    • sin(−t)=−0.28
    cos t = 0.28. Is −cos t equal to cos(−t)?
    No: cos(−t) = 0.28, but −cos t = −0.28.
    In sin(−t) = −sin t, which side is the LHS?
    sin(−t), the left-hand side of the equals sign.