Periodic functions: the values repeat every lap
Quick review (2 minutes)
Think of a calendar.
A positive repeat k preserves the domain in both directions and satisfies f(t + k) = f(t) wherever defined. A function with such a repeat is periodic. If there is a smallest positive repeat, it is the period. For any integer n: sin(t ± 2nπ) = sin t, and the same for cos, sec and csc; tan(t ± nπ) = tan t, and the same for cot. Degree repeats are 360° and 180°, respectively. In degrees, sin t = sin(t ± n·360°), with integer n; likewise cos, sec and csc.
1. Identify the requested function and its period: 2π (360°) for sin, cos, sec and csc; π (180°) for tan and cot.
2. Add whole periods to a negative angle, or subtract them from an angle at least one period, until 0 ≤ reduced angle < period.
3. Use a known special or axis value if the reduced angle is one you know. Other angles may permit a sign decision without a familiar exact value.
4. The original expression has exactly the same output, sign included. If the reduced expression is undefined, the original one is also undefined.
Read a reference-table entry in the column under its input or category in the matching picture.
Find the exact value of each expression without a calculator. (a) sin(−) (b) tan(1110°)
Removing a single π from a sine, cosine, secant or cosecant angle. Half a lap flips their sign: sin(t + π) = −sin t, so sin 210° is −, not sin 30° = . Only tangent and cotangent may drop π at a time; the others must drop 2π (360°).
1. Identify the function and choose its period in the input's unit.
2. For a negative angle, add whole periods until the result is at least 0.
3. For an angle at least one period, subtract whole periods until the result is below one period.
4. Evaluate the reduced angle if its value is known. If it is not a known exact angle, the reduction still helps locate its sign.
Domain
All the inputs a function accepts. For the trig functions, the inputs are angles, or real numbers t read as radians.
Integer n
An integer is a whole number, including negatives and zero. In t ≠ + nπ, n ranges over every integer, so the rule excludes infinitely many inputs.
Quadrant
One of the four regions the two axes cut the plane into, numbered I, II, III, IV counterclockwise from the upper right. An angle is in the quadrant that holds its terminal side.
Undefined
A function is undefined at an input when its formula would divide by zero there. No output exists, so that input is left out of the domain.
Periodic function
A function that repeats after a positive shift k: shifting preserves its domain and f(t + k) = f(t) for every allowed t.
Period
The least positive repeat length, when one exists. The six trig functions have least periods; a constant function repeats after any positive shift and has no least positive period.
Coterminal angles
Angles that end on the same terminal side. They differ by whole turns: a multiple of 360°, or of 2π.
Exact value
A value stated without rounding, often written using whole numbers, fractions or square roots. An exact expression keeps the complete value instead of stopping at a rounded decimal.
Sine
Sine reads the unit-circle point's height.
Cosine
Cosine reads the unit-circle point's horizontal position.
Tangent
Tangent divides height by horizontal position.
Cotangent
Cotangent divides horizontal position by height.
Secant
Secant is the reciprocal of the horizontal coordinate.
Cosecant
Cosecant is the reciprocal of the height coordinate.
1 In plain words
Think of a calendar. Seven days after a Monday, the weekday is Monday again. A periodic function repeats its outputs after a fixed positive change in its input. On the unit circle, turning one full lap brings the rider to the same position. The coordinates, and every function built from them, repeat. One lap is 2π radians or 360°. Sine, cosine, secant and cosecant need that full lap for their shortest repeat, called the period. Tangent and cotangent repeat after half a lap, π radians or 180°, because both coordinates reverse sign together and their ratio stays the same.
Explain it like I am five
Picture the hour hand of a clock: every 12 hours it is back in the same spot. A periodic function works the same way. Slide the input forward by a fixed step k and the output repeats: f(t + k) = f(t), read 'f of t plus k equals f of t'. The smallest such step is the period.
On the unit circle one full lap is 360°, or 2π (two pi). A full lap returns the point to the same spot, so all six values repeat. Angles that end in the same place, such as 60° and 420°, are coterminal; they share every value, so you can trade a big angle for a small one you know.
Example: cos 1140°. Count laps: 1140 ÷ 360 ≈ 3.17 (≈ means about), so remove 3 × 360° = 1080°, leaving 60°. So cos 1140° = cos 60° = .
Tangent and cotangent repeat sooner, every half lap (180°, or π). A half turn sends the point (x, y) to (−x, −y), and = because the two minus signs cancel.
2 Picture it
Reminder
Reminder: Common denominators, Signs in a quotient, Integer multiples
- Common denominators. For sixths of π, 2π = , so − 2π = .
- Signs in a quotient. = because two negative signs cancel.
- Integer multiples. Three periods of tangent in radians are 3π; three full laps are 6π.
3 Why
The circle's circumference, its distance around the rim, is 2π × 1 = 2π, so a full lap restores both coordinates and every allowed division built from them. A half lap sends (x, y) to (−x, −y). Thus = and = , proving the shorter tangent and cotangent repeats. The other four change sign after half a lap, so that repeat fails. To prove these are the shortest periods, compare repeated maximum values or repeated zero values, as the individual parts below show.
4 The rule
A positive repeat k preserves the domain in both directions and satisfies wherever defined.
A function with such a repeat is periodic. If there is a smallest positive repeat, it is the period. For any integer n: , and the same for cos, sec and csc; , and the same for cot. Degree repeats are and , respectively. In degrees, , with integer n; likewise cos, sec and csc.
The same idea, five ways
A periodic function repeats after a fixed positive change in its input.
Adding or subtracting whole periods preserves the value and keeps permitted inputs permitted.
- f(t + k) = f(t) for a positive repeat k.
- sin(t ± 2nπ) = sin t, with integer n; likewise cos, sec and csc.
- tan(t ± nπ) = tan t, with integer n; likewise cot.
- Coordinate and reciprocal periods: 2π = 360°.
- Ratio periods: π = 180°.
- On a graph, the same shape returns after a horizontal shift of one period.
A weekday repeats after seven days even while the date number changes.
The same idea, other ways
Adding 7 days preserves the weekday. Adding 360° preserves a point on the wheel. The extra travel changes the input while the output repeats.
A half lap changes (x, y) into (−x, −y). Sine and cosine change sign, but tangent and cotangent divide two negatives and keep their values.
Sine at 30°, 390° and 750° is each time. Tangent at 60° and 240° is ; the half-lap ratio does not change.
An output matching at one pair of inputs does not establish a period. The change must work at every permitted input. A constant function, such as f(t) = 3, repeats after every positive change, so it is periodic without a smallest positive period.
| Function | sin t | cos t | tan t | cot t | sec t | csc t |
|---|---|---|---|---|---|---|
| Period | 2π (360°) | 2π (360°) | π (180°) | π (180°) | 2π (360°) | 2π (360°) |
Part 1: Sine repeats height
A full lap returns the rider to the same height. Half a lap usually puts the rider at the opposite height.
- sin(t + 2π) = sin t.
- Period: 2π, or 360°.
- Any sine period k must give sin k = sin 0 = 0, so k is a multiple of π. The candidate π fails at t = , so 2π is the smallest positive repeat.
Worked example
A repeat of sin
The question asks for the unchanged output after removing periods. Find sin 1110°.
Show the steps and the answer
- .Remove 3 whole periods of 360°; the output is preserved.
- .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use this object's defining formula to check the example before relying on a remembered pattern.
Part 2: Cosine repeats horizontal position
A full lap returns the rider to the same horizontal position. A half lap reverses that position.
- cos(t + 2π) = cos t.
- Period: 2π, or 360°.
- At t = 0, cosine is 1. The next angle with cosine 1 is 2π, so no smaller positive shift can repeat every cosine value.
Worked example
A repeat of cos
The question asks for the unchanged output after removing periods. Find cos 1500°.
Show the steps and the answer
- .Remove 4 whole periods of 360°; the output is preserved.
- .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use this object's defining formula to check the example before relying on a remembered pattern.
Part 3: Tangent repeats after a half lap
A half lap reverses both coordinates. Height divided by horizontal position keeps its value because both signs reverse.
- tan(t + π) = tan t wherever defined.
- Period: π, or 180°.
- At t = 0, tangent is 0. Its next zero is π, so a smaller positive shift cannot repeat all tangent values.
Worked example
A repeat of tan
The question asks for the unchanged output after removing periods. Find tan 1140°.
Show the steps and the answer
- .Remove 6 whole periods of 180°; the output is preserved.
- .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use this object's defining formula to check the example before relying on a remembered pattern.
Part 4: Cotangent repeats after a half lap
Horizontal position divided by height also keeps its value after both coordinates reverse sign.
- cot(t + π) = cot t wherever defined.
- Period: π, or 180°.
- At t = , cotangent is 0. Its next zero is , a distance π later, so no smaller positive shift repeats all its values.
Worked example
A repeat of cot
The question asks for the unchanged output after removing periods. Find cot 1305°.
Show the steps and the answer
- .Remove 7 whole periods of 180°; the output is preserved.
- .cot 45° = () ÷ = 1
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use this object's defining formula to check the example before relying on a remembered pattern.
Part 5: Secant repeats its horizontal reciprocal
A full lap restores cosine, so it restores secant. A half lap changes cosine's sign and therefore secant's sign.
- sec(t + 2π) = sec t wherever defined.
- Period: 2π, or 360°.
- At t = 0, secant is 1. That requires cosine 1, which next occurs at 2π. A smaller positive shift cannot repeat all secant values.
Worked example
A repeat of sec
The question asks for the unchanged output after removing periods. Find sec 1500°.
Show the steps and the answer
- .Remove 4 whole periods of 360°; the output is preserved.
- .sec 60° = 1 ÷ = 2
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use this object's defining formula to check the example before relying on a remembered pattern.
Part 6: Cosecant repeats its height reciprocal
A full lap restores sine, so it restores cosecant. A half lap reverses the sign of both sine and cosecant.
- csc(t + 2π) = csc t wherever defined.
- Period: 2π, or 360°.
- At t = , cosecant is 1. Sine next returns to 1 at , a distance 2π later, so no smaller positive shift repeats all its values.
Worked example
A repeat of csc
The question asks for the unchanged output after removing periods. Find csc 1110°.
Show the steps and the answer
- .Remove 3 whole periods of 360°; the output is preserved.
- .csc 30° = 1 ÷ = 2
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use this object's defining formula to check the example before relying on a remembered pattern.
5 How
- 1. Identify the requested function and its period: 2π (360°) for sin, cos, sec and csc; π (180°) for tan and cot.
- 2. Add whole periods to a negative angle, or subtract them from an angle at least one period, until 0 ≤ reduced angle < period.
- 3. Use a known special or axis value if the reduced angle is one you know. Other angles may permit a sign decision without a familiar exact value.
- 4. The original expression has exactly the same output, sign included. If the reduced expression is undefined, the original one is also undefined.
- Read a reference-table entry in the column under its input or category in the matching picture.
Reducing an angle by a function's period
- Identify the function and choose its period in the input's unit.
- For a negative angle, add whole periods until the result is at least 0.
- For an angle at least one period, subtract whole periods until the result is below one period.
- Evaluate the reduced angle if its value is known. If it is not a known exact angle, the reduction still helps locate its sign.
6 Worked example
Worked example
Reducing a negative radian angle and a large degree angle by whole periods
Find the exact value of each expression without a calculator. (a) sin(−) (b) tan(1110°)
Show the steps and the answer
- (a) The function is sine, so the period is .sin(t ± 2nπ) = sin t for every integer n, and 2π is the smallest positive repeat of sine.
- (a) The angle is negative, so add whole periods. Add once: . This is still negative, so add again: . Now .Adding two whole periods (n = 2) moves the angle into the interval from 0 to one period without changing the sine value.
- . is the special angle past π, in Quadrant III. There sine is negative and the reference value is sin() = .
- (a) So .The original expression has exactly the same output as the reduced one, sign included.
- (b) The function is tangent, so the period is .tan(t ± n·180°) = tan t for every integer n. Tangent repeats every half lap, not every full lap.
- (b) The angle is at least one period, so subtract whole periods. is 6 with remainder , so subtract 6 periods: . Now .Subtracting six whole periods (n = 6) gives the reduced angle in the interval from 0° up to one period.
- , so .30° is a special angle with tan 30° = = . The original expression has the same value and the same sign.
Work to write
- sine has period 2π; tangent has period 180°
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
Remove one full lap
The question asks for sine after removing one full lap. Find sin 390°.
Show the steps and the answer
- .Sine repeats every 360°.
- .The special-angle sine is .
Rung 2 of 5
Use the shorter period
The question asks for tangent after removing half-lap periods. Find tan 1140°.
Show the steps and the answer
- .Tangent repeats every 180°.
- .The ratio at 60° is () ÷ = .
Rung 3 of 5
Reduce a fractional radian angle
The question asks for sine after removing whole laps in radians. Find sin .
Show the steps and the answer
- Three full laps are .Sine's period is 2π, so three periods equal 6π.
- .The denominator 6 means the pieces match.
- . is the 30° special angle.
Rung 4 of 5
Move a negative angle forward
The question asks for sine after adding full laps to a negative input. Find sin(−).
Show the steps and the answer
- Four sine periods are .Sine's period is 2π, and sixths give a common denominator.
- .Adding four full laps preserves the stopping point and its sine output.
- .The reduced angle is the 30° special angle, whose height is .
Rung 5 of 5
Same-angle reciprocal cancellation
The question asks for a product whose two angles must first be matched. Find 7 cos sec .
Show the steps and the answer
sec = sec = 2
- .Secant's period is 2π, and six periods remove 12π.
- .Cosine and secant are reciprocal at this defined angle.
- The denominator is nonzero.This confirms that reciprocal multiplication is allowed.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Know the pattern: ratios repeat after half a lap; coordinates and their reciprocals repeat after a full lap.
- When reducing, remove a whole-number multiple of the requested function's period. Keep radians and degrees separate.
7 The trap
Removing a single π from a sine, cosine, secant or cosecant angle. Half a lap flips their sign: sin(t + π) = −sin t, so sin 210° is −, not sin 30° = . Only tangent and cotangent may drop π at a time; the others must drop 2π (360°).
Keep in mind
- Drop only whole periods: removing 180° from cosine flips its sign, so cos 240° = −cos 60° = −, not .
- To count laps, divide by 360 and keep only the whole-number part, never rounding up: 1070 ÷ 360 ≈ 2.97, so remove 2 laps, 720°, leaving 350°.
- Periodic means the whole pattern repeats, not one lucky match: sin 30° and sin 150° are both , yet 120° is not a period of sine, since sin 90° = 1 but sin 210° = −.
Memory hook
Tangent is in a hurry: tan and cot repeat every half lap (180°, π); sin, cos, sec and csc need the full lap (360°, 2π).
Flash cards
Say the answer out loud, then flip.
What is a period?
What are coterminal angles?
Period of sec t? Period of cot t?
- sec t: 2π (360°).
- cot t: π (180°).