Which quadrant is the angle in?
Quick review (2 minutes)
To locate an angle, picture an address around a circular track.
I: 0 < t < . II: < t < π. III: π < t < . IV: < t < 2π. Reduce to 0 ≤ t < 2π, or 0° ≤ θ < 360°. A multiple of or 90° lies on an axis, not in a quadrant.
1. Read the unit. A degree sign means degrees; without a degree sign the input is in radians.
2. If the angle is negative, add 360° or 2π until it is at least 0. If it is at least one full turn, subtract full turns until it is less than 360° or 2π. The final window includes 0 and excludes a full turn.
3. For degrees, compare with the exact boundaries 0°, 90°, 180°, 270°, 360°.
4. For a multiple of π, compare its coefficient with 0, , 1, , 2. This works because π is positive.
5. For a plain radian number, use ≈ 1.5708, π ≈ 3.1416, ≈ 4.7124, 2π ≈ 6.2832. Each decimal is rounded to four places. Keep enough precision to decide which side of the exact boundary the number is on.
6. Use the exact interval in the column under the chosen quadrant. If the angle equals a boundary, name the axis direction instead: 0 gives positive x, positive y, π negative x, negative y.
Read a reference-table entry in the column under its input or category in the matching picture.
In which quadrant does each angle lie? If an angle lies on an axis, name the axis direction. (a) −480° (b) (c) t = −4 (d) 630°
(a) −480° is in Quadrant III. (b) is in Quadrant IV. (c) t = −4 is in Quadrant II. (d) 630° lies on the negative y-axis, not in a quadrant.
A plain number such as t = 4 means 4 radians, about 229°, rather than 4°. Also, 1.57 is a rounded landmark, rather than exactly . A number close to a rounded landmark needs more digits before you choose a quadrant.
1. Identify degrees or radians.
2. Add full turns to a negative angle and subtract full turns from an angle at least one full turn.
3. Stop in the window that includes 0 and excludes the full turn.
4. Choose exact degree landmarks, coefficients of π or sufficiently precise decimal landmarks.
5. Check equality with an axis before naming a quadrant.
Quadrant
One of the four regions the two axes cut the plane into, numbered I, II, III, IV counterclockwise from the upper right. An angle is in the quadrant that holds its terminal side.
1 In plain words
To locate an angle, picture an address around a circular track. The four corners of the trip are a quarter, a half, three quarters and one whole turn. Each stretch between corners is a quadrant. If your address includes extra laps, remove the laps first. If you traveled backward, add laps until the address is between 0 and one whole turn. An angle with a degree sign uses 90°, 180°, 270° and 360° as its corners. A number without that sign uses radians, with corners , π, and 2π. Decimal estimates help you compare ordinary numbers with those exact corners.
Explain it like I am five
Picture a pizza cut into four equal slices by two straight cuts. Every angle starts on the cut pointing right, at 3 o'clock. A positive angle turns counterclockwise, the same way the slices are numbered I, II, III, IV; a negative angle turns clockwise. The sign sets only the direction, and the number says how far.
Example: where does −500° end? Clockwise 500° is more than one full lap of 360°. Add whole laps until the angle is at least 0° and less than 360°: −500° + 360° = −140°, still negative, and −140° + 360° = 220°. Adding a lap never moves where the turn stops, the terminal side (terminal means end, like a bus terminal), so −500° and 220° are coterminal: they stop in the same place.
Now compare with the slice edges 90°, 180° and 270°: 220° is between 180° and 270°, so −500° ends in Quadrant III. An angle landing exactly on 0°, 90°, 180° or 270° sits on a cut, in no quadrant.
2 Picture it
Reminder
Reminder: Common denominators, Multiplication by a positive number, Open and closed endpoints
- Common denominators. To subtract full turns from a fraction of π, match the bottom: − 2π = − = .
- Multiplication by a positive number. Multiplying by positive π keeps order: 0.5 < 0.75 < 1 becomes < < π.
- Open and closed endpoints. [0, 2π) includes 0 and excludes 2π. Thus 2π reduces to 0, while stays on its axis.
3 Why
A full circle is 2π radians or 360°, so one quarter is radians or 90°. The four quadrants are the open stretches between consecutive axis directions. Adding or subtracting a full turn returns to the same terminal side, so it preserves the location. Multiplying or dividing by positive π preserves numerical order; this lets you compare coefficients in an angle such as . Decimal landmarks approximate the exact boundaries. They are safe for numbers well away from a boundary, but a nearby number needs more precision or an exact comparison.
4 The rule
I: .
II: . III: . IV: . Reduce to , or . A multiple of or lies on an axis, not in a quadrant.
The same idea, five ways
Find the ending side inside the first full turn, then compare it with the four axis directions.
An angle is in a quadrant when its terminal side lies strictly between that quadrant's two axes.
- 0 ≤ t < 2π
- 0° ≤ θ < 360°
- II: < t < π
- III: π < t <
- IV: < t < 2π
- Quadrant I inputs: (0, ).
- Quadrant II inputs: (, π).
- Quadrant III inputs: (π, ).
- Quadrant IV inputs: (, 2π).
- Quadrant II inputs: {t | < t < π}.
An address on a circular track gives the stopping place after completed laps are removed.
The same idea, other ways
Ignore how many complete laps a runner took. Mark only the stopping position in the current lap. The first quarter is I, then II, III and IV. The four corner positions are axes and belong to no quadrant.
Cut the interval from 0 to 2π at , π and . Every input inside one of the four slots names a quadrant. An input on a cut names an axis. This picture makes the strict inequality signs matter.
For , divide the whole comparison by positive π. You only need to place = 1.75 between 0, 0.5, 1, 1.5 and 2. It falls in the last slot, so the original angle is in IV.
1.5 < 1.75 < 2
| Quadrant | Exact radians | Approximate boundary landmarks | Exact degrees |
|---|---|---|---|
| I | 0 and about 1.57 | 0° < θ < 90° | |
| II | about 1.57 and about 3.14 | 90° < θ < 180° | |
| III | about 3.14 and about 4.71 | 180° < θ < 270° | |
| IV | about 4.71 and about 6.28 | 270° < θ < 360° |
Part 1: Quadrant I
This is the upper right stretch of the circular track. The two endpoints are axis positions, so the quadrant includes only angles strictly between them.
- An endpoint lies on an axis, not inside this quadrant.
Worked example
An angle inside Quadrant I
Locate t = . The question asks which region contains its terminal side.
Show the steps and the answer
- Compare in tenths: .Fractions with a common positive bottom can be compared by their tops.
- Multiplying the comparison by positive puts t inside Quadrant I.The strict boundary comparison matches 0 < t < .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write both bounding landmarks when naming this quadrant.
Part 2: Quadrant II
This is the upper left stretch of the circular track. The two endpoints are axis positions, so the quadrant includes only angles strictly between them.
- An endpoint lies on an axis, not inside this quadrant.
Worked example
An angle inside Quadrant II
Locate t = . The question asks which region contains its terminal side.
Show the steps and the answer
- Compare the coefficients: .Fractions with a common positive bottom can be compared by their tops.
- Multiplying the comparison by positive puts t inside Quadrant II.The strict boundary comparison matches < t < π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write both bounding landmarks when naming this quadrant.
Part 3: Quadrant III
This is the lower left stretch of the circular track. The two endpoints are axis positions, so the quadrant includes only angles strictly between them.
- An endpoint lies on an axis, not inside this quadrant.
Worked example
An angle inside Quadrant III
Locate t = . The question asks which region contains its terminal side.
Show the steps and the answer
- Compare the coefficients: .Fractions with a common positive bottom can be compared by their tops.
- Multiplying the comparison by positive puts t inside Quadrant III.The strict boundary comparison matches π < t < .
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write both bounding landmarks when naming this quadrant.
Part 4: Quadrant IV
This is the lower right stretch of the circular track. The two endpoints are axis positions, so the quadrant includes only angles strictly between them.
- An endpoint lies on an axis, not inside this quadrant.
Worked example
An angle inside Quadrant IV
Locate t = . The question asks which region contains its terminal side.
Show the steps and the answer
- Compare the coefficients: .Fractions with a common positive bottom can be compared by their tops.
- Multiplying the comparison by positive puts t inside Quadrant IV.The strict boundary comparison matches < t < 2π.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write both bounding landmarks when naming this quadrant.
5 How
- 1. Read the unit. A degree sign means degrees; without a degree sign the input is in radians.
- 2. If the angle is negative, add 360° or 2π until it is at least 0. If it is at least one full turn, subtract full turns until it is less than 360° or 2π. The final window includes 0 and excludes a full turn.
- 3. For degrees, compare with the exact boundaries 0°, 90°, 180°, 270°, 360°.
- 4. For a multiple of π, compare its coefficient with 0, , 1, , 2. This works because π is positive.
- 5. For a plain radian number, use ≈ 1.5708, π ≈ 3.1416, ≈ 4.7124, 2π ≈ 6.2832. Each decimal is rounded to four places. Keep enough precision to decide which side of the exact boundary the number is on.
- 6. Use the exact interval in the column under the chosen quadrant. If the angle equals a boundary, name the axis direction instead: 0 gives positive x, positive y, π negative x, negative y.
- Read a reference-table entry in the column under its input or category in the matching picture.
Locating an angle without changing its ending side
- Identify degrees or radians.
- Add full turns to a negative angle and subtract full turns from an angle at least one full turn.
- Stop in the window that includes 0 and excludes the full turn.
- Choose exact degree landmarks, coefficients of π or sufficiently precise decimal landmarks.
- Check equality with an axis before naming a quadrant.
6 Worked example
Worked example
Place four angles: degrees, a multiple of π, a plain radian and an axis case
In which quadrant does each angle lie? If an angle lies on an axis, name the axis direction. (a) −480° (b) (c) t = −4 (d) 630°
Show the steps and the answer
- Read the units. (a) and (d) have a degree sign, so they are in degrees. (b) and (c) have no degree sign, so they are in radians.A degree sign means degrees. Without one, the input is in radians.
- (a) is negative, so add : . That is still negative, so add again: .Add full turns until the angle is in the window 0° ≤ θ < 360°.
- (a) Compare with the boundaries: . So is in Quadrant III.Quadrant III is 180° < θ < 270°.
- (b) The coefficient of is , which is at least 2. Subtract 2 twice, which takes off : . The angle reduces to .Subtract full turns of 2π until the angle is in 0 ≤ t < 2π.
- (b) Compare the coefficient: . So , and is in Quadrant IV.For a multiple of π, comparing coefficients with 0, , 1, and 2 works because π is positive.
- (c) is negative, so add : .Add one full turn so the angle is in 0 ≤ t < 2π.
- (c) Compare with the decimal boundaries: 1.5708 < 2.2832 < 3.1416. The number is about 0.7 away from each boundary, so four decimal places are more than enough. The angle is in Quadrant II.Quadrant II is < t < π, with ≈ 1.5708 and π ≈ 3.1416.
- (d) 630° is at least 360°, so subtract a full turn: .Subtract full turns until the angle is less than 360°.
- (d) equals a boundary. It is a multiple of , so it lies on an axis and not in a quadrant. corresponds to , the negative y-axis.An angle equal to a boundary is named by its axis direction: or 270° gives the negative y-axis.
Work to write
- (a) −480° + 360° + 360° = 240°; 180° < 240° < 270° → Quadrant III
- (b) − 4π = ; < < 2 → Quadrant IV
- (c) −4 + 2π ≈ 2.2832; 1.5708 < 2.2832 < 3.1416 → Quadrant II
- (d) 630° − 360° = 270° → on the negative y-axis (not in a quadrant)
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 7
Degrees already in one turn
Locate θ = 26°. The question asks which region contains the ending side.
Show the steps and the answer
- .The angle lies after the starting direction but before the first quarter turn.
- Therefore the terminal side lies in I.That strict interval defines I.
Rung 2 of 7
A plain radian number
Locate t = 2.4. There is no degree sign, so compare a radian input with the radian landmarks.
Show the steps and the answer
- and .These are the two neighboring exact axis boundaries, rounded to four places.
- 1.5708 < 2.4 < 3.1416, so .2.4 lies well away from either rounded boundary.
- Therefore the angle lies in II.II is between and π.
Rung 3 of 7
Compare fractions of π
Locate t = . Compare exact fractions rather than rounded decimals.
Show the steps and the answer
- and .Giving the boundaries the same bottom makes their sizes directly comparable.
- .12 < 13 < 16, and is positive.
- Thus .These are the bounds of IV.
Rung 4 of 7
Several backward turns
Locate θ = −410°. Add laps to find its stopping direction in the first turn.
Show the steps and the answer
- , still negative.One added lap is not enough to enter [0°, 360°).
- .A second added lap preserves the terminal side and enters the chosen window.
- , so the angle is in IV.The fourth quarter lies between these exact boundaries.
Rung 5 of 7
Which quadrant is t = −9 in?
In which quadrant does each angle lie? If an angle lies on an axis, name the axis direction. (a) t = −9 (b) t = 13 (c) t =
Show the steps and the answer
- Read the units. None of the three angles has a degree sign, so all three are in radians. Parts (a) and (b) are plain radian numbers. Part (c) is a multiple of .Without a degree sign the input is in radians.
- (a) is negative, so add : . That is still negative, so add again: . Exactly, the angle is , and .Adding full turns gives a coterminal angle. Keep adding until the angle is at least 0 and less than 2π.
- (a) Compare 3.5664 with the boundaries. . Check exactly: because . Also because .A plain radian number is compared with decimal approximations of the exact boundaries. The gaps of about 0.42 and 1.15 are far larger than any rounding error.
- (a) The angle lies in , so it is in Quadrant III.The interval π < t < is the column under Quadrant III.
- (b) 13 is at least one full turn. Subtract : . That is still at least , so subtract again: . Exactly, the angle is .Subtract full turns until the angle is less than 2π.
- (b) Compare: . So is in Quadrant I.The interval 0 < t < is Quadrant I.
- (c) has coefficient . This is at least 2, so subtract one full turn: . The reduced angle is .For a multiple of π, work with the coefficient. Subtracting 2 from the coefficient removes one full turn.
- (c) The coefficient equals a boundary exactly. So lies on an axis, in the negative y direction.A multiple of lies on an axis, and points along the negative y-axis.
Work to write
- π ≈ 3.1416 < 3.5664 < 4.7124 ≈ , so Quadrant III
- 0 < 0.4336 < 1.5708 ≈ , so Quadrant I
- (c) − 2π = , so on the axis in the negative y direction
Rung 6 of 7
A negative fraction requiring several laps
Locate t = −. Find a coterminal input in [0, 2π).
Show the steps and the answer
- Each lap is . Add three laps, .Two laps add only and would leave a negative remainder.
- .The bottoms match, so combine the tops.
- , so the angle is in I.A quarter of π is less than half of π.
Rung 7 of 7
A remainder exactly on a boundary
Locate θ = 810°. The question allows an axis answer, so check equality before selecting a quadrant.
Show the steps and the answer
- .Two full turns leave a remainder in [0°, 360°).
- is exactly the first quarter turn.It equals a boundary rather than lying inside a quadrant.
- The terminal point is (0, 1), on the positive y-axis.A quarter turn from (1, 0) reaches the top of the circle.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write the exact reduction first, such as 9 − 2π, then give a rounded decimal with ≈.
- For an angle written with π, compare the coefficient with 0.5, 1 and 1.5 before reaching for a calculator.
- If the remainder is 0 or an exact quarter turn, name an axis and stop using strict quadrant rows.
7 The trap
A plain number such as t = 4 means 4 radians, about 229°, rather than 4°. Also, 1.57 is a rounded landmark, rather than exactly . A number close to a rounded landmark needs more digits before you choose a quadrant.
Keep in mind
- A plain number means radians, not degrees: t = 6 is about 343.8°, in Quadrant IV, while 6° is in Quadrant I.
- Every angle starts pointing right, and counterclockwise describes the turn, not the start: 120° starts at 3 o'clock and swings up and over to the upper left.
- The sign sets only the direction: 130° turns counterclockwise into Quadrant II, while −130° turns clockwise into Quadrant III, the same place as 230°.
- Near a landmark, keep more digits: t = 3 is in Quadrant II, because 3 < π ≈ 3.1416.
Memory hook
Shrink to 0° ≤ θ < 360° by adding or removing 360°, then find the landmarks around it: 0°, 90°, 180°, 270°, 360° (0, 1.57, 3.14, 4.71, 6.28 radians, rounded).
Flash cards
Say the answer out loud, then flip.
What is standard position?
- Vertex (the corner point) at (0, 0), starting side along the positive x-axis (pointing right)
- positive angles turn counterclockwise.