Quarry School

Definition 3: the unit circle

Subject: MathematicsLeans on: Absolute valueLeans on: Circle equationLeans on: Dividing fractionsLeans on: Radians
Level 2 · BuildingAbout 17 min read8 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Picture a round running track with radius 1 and the starting mark at (1, 0).

    Rule

    x2 + y2 = 1 and P(t) = (cos t, sin t). tan t = yx and sec t = 1x require x ≠ 0; cot t = xy and csc t = 1y require y ≠ 0.
    P(t ± π) = (−x, −y); P(−t) = (x, −y); P(t + 2nπ) = (x, y), where n is any integer.

    Step

    1. For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.

    2. Read x and y from the Terminal point P(t), and check x2 + y2 = 1 if a point is supplied.

    3. Write cos t = x and sin t = y.

    4. Use tan = yx, cot = xy, sec = 1x and csc = 1y, checking each denominator.

    5. For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.

    6. For several moves, apply them one at a time and check the resulting quadrant.

    Question

    A point starts at (1, 0) on the unit circle x2 + y2 = 1 and travels clockwise a distance of 19π6, so it marks the real number t = −19π6. You may use P(π6) = (32, 12). Describe where the travel ends. Then find the terminal point P(t) by applying the symmetry rules one move at a time, name its quadrant and confirm that it lies on the unit circle. Finally, find the exact values of sin t, cos t, tan t, cot t, sec t and csc t, rationalizing every denominator.

    Answer

    P(−19π6) = (−32, 12), in Quadrant II. sin t = 12, cos t = −32, tan t = −33, cot t = −3, sec t = −233, csc t = 2.

    Trap

    Swapping x and y. The point is P(t) = (cos t, sin t): cosine comes first, as x does. Alphabetical order helps: c before s, x before y.

    Strategy

    1. For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.

    2. Read x and y from the Terminal point P(t), and check x2 + y2 = 1 if a point is supplied.

    3. Write cos t = x and sin t = y.

    4. Use tan = yx, cot = xy, sec = 1x and csc = 1y, checking each denominator.

    5. For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.

    6. For several moves, apply them one at a time and check the resulting quadrant.

    Term

    Right triangle

    Definition

    A triangle with one 90° corner. The other two angles are acute and add up to 90°.

    Term

    Reciprocal

    Definition

    The flip of a nonzero number: 1 divided by it. A number times its reciprocal is 1. Zero has no reciprocal.

    Term

    Terminal side

    Definition

    The ray where an angle ends after its rotation. The point definition reads a point on it.

    Term

    Quadrant

    Definition

    One of the four regions the axes cut the plane into, numbered I, II, III, IV counterclockwise from the upper right.

    Term

    Undefined

    Definition

    No value exists, because the formula would divide by zero.

    Term

    Unit circle

    Definition

    A circle of radius 1 centered at the origin, with equation x2 + y2 = 1. A general origin-centered circle has equation x2 + y2 = r2.

    Term

    Radian

    Definition

    An angle unit: one radian cuts off an arc exactly as long as the radius. π radians = 180°.

    Term

    Terminal point P(t)

    Definition

    The unit-circle point reached after traveling distance |t| from (1, 0), with direction given by the sign of t. Its coordinates are (cos t, sin t).

    Term

    Circular functions

    Definition

    Another name for the trig functions when they are defined on the unit circle and their inputs are real numbers.

    Term

    Origin

    Definition

    The coordinate address (0, 0), where the two axes cross.

    Term

    Radius

    Definition

    The distance from a circle’s center to any point on the circle.

    Term

    Arc

    Definition

    A curved part of a circle between two points.

    Term

    Absolute value

    Definition

    A number’s distance from zero, written with bars. It is never negative.

    Term

    Function

    Definition

    A rule giving exactly one output for each allowed input. Trigonometric functions take angle inputs and produce numerical ratios.

    Term

    Ratio

    Definition

    A comparison of one quantity with another by division. The order says which quantity is on top.

    Term

    Leg

    Definition

    Either of the two sides meeting at the right angle of a right triangle. Each is shorter than the hypotenuse.

    1 In plain words

    Picture a round running track with radius 1 and the starting mark at (1, 0). This is the Unit circle. A real number t gives signed travel around it: walk a distance |t|, counterclockwise for t > 0 and clockwise for t < 0. The bars |t| mean the size without its sign; for t = −3 the distance is 3. At t = 0 you stay at the start. Your stopping place is the Terminal point P(t). If it is (x, y), cosine reads x and sine reads y. These trig functions with real-number inputs are also called Circular functions. A half lap changes both coordinates' signs; reversing the travel changes only the up or down coordinate.

    Explain it like I am five

    Picture a running track of radius 1 around the origin, the unit circle, with its start line at (1, 0). A number t says how far to walk: counterclockwise when t is positive, clockwise when t is negative. Where you stop is the terminal point P(t), read "P of t".

    With r = 1, the rules become sin t = y1 = y and cos t = x1 = x. So the stopping point's address is (cos t, sin t), cosine first like x. A question such as "P is on the unit circle, find cos t and sin t" asks you to read that address.

    Say P(t) = (−1517, 817). It is on the track, since x2 + y2 = 225289 + 64289 = 1. Read cos t = −1517 and sin t = 817, so tan t = yx = −815. Any circle around the origin shrinks to this one: the map point (−15, 8), 17 from home, divided by 17 lands here on the same ray, which is what sin = yr and cos = xr do.

    2 Picture it

    x = cos θy = sin θ(−3/5, −4/5)
    The point (−3/5, −4/5) on the unit circle at 233.13°.

    Reminder

    Reminder: Absolute value, Circle equation, Dividing fractions, Radians
    • Absolute value. |t| is the nonnegative size: |−3π2| = 3π2. The original minus sign still sets clockwise travel.
    • Circle equation. A radius-1 circle centered at the origin satisfies x2 + y2 = 1: 144169 + 25169 = 1.
    • Dividing fractions. 513 ÷ 1213 = 512, since their equal denominators cancel.
    • Radians. π is a half turn and 2π is a full turn. In a diagram, π radians is drawn as 180°.

    3 Why

    The distance r from the origin is 1, so the point definition becomes sin t = y1 = y and cos t = x1 = x. Radian magnitude is arc length divided by radius; on this track, a distance |t| turns you through |t| radians. Direction supplies its sign. Thus signed travel t matches the angle t radians. A diameter, a straight line through the center from one circle point to another, connects opposite points, so a half turn reverses both coordinates. Reversing travel reflects across the x-axis, keeping x and reversing y. A full turn returns to the same point.

    4 The rule

    x2+y2=1 and P(t)=(cost,sint).

    tant=yx and sect=1x require x≠0; cott=xy and csct=1y require y≠0.P(t±π)=(−x,−y); P(−t)=(x,−y); P(t+2nπ)=(x,y), where n is any integer.

    The same idea, five ways

    Say it

    Cosine is the first coordinate; sine is the second. Signed travel includes both distance and direction.

    Write it

    A real number t names the point reached by walking |t| along the unit circle in the direction given by its sign.

    In math
    • P(t) = (cos t, sin t)
    • x2+y2=1
    • P(t±π)=(−x,−y)
    • P(−t)=(x,−y)
    • P(t + 2nπ) = P(t), n any integer
    Like

    Walk around a track, then report how far right or left and up or down you stopped.

    See it
    x = cos θy = sin θ(−3/5, −4/5)
    The same picture again: The point (−3/5, −4/5) on the unit circle at 233.13°.

    The same idea, other ways

    As a track walk

    The circle starts at (1, 0). Positive t sends you counterclockwise; negative t reverses that direction. If t = −π, walk distance π clockwise. You reach (−1, 0), the same point reached by a positive half turn.

    t = −π
    The negative sign supplies direction; the distance walked is π.
    As a triangle shrunk to one

    A point (12, 5) is 13 from the origin because 122 + 52 = 169 = 132. Divide both coordinates and the radius by 13. The new point (1213, 513) has radius 1. Sine becomes its y-coordinate because y divided by 1 is y.

    x = cos θy = sin θ(12/13, 5/13)
    On the unit circle the hypotenuse is 1, so the leg ratios are the coordinates.
    As a coordinate address

    Remember the order P(t) = (cos t, sin t). Cosine is horizontal and comes first, as x does. Sine is vertical and comes second, as y does. At P(t) = (−35, −45), write cos t = −35 and sin t = −45 before any division.

    x = cos θy = sin θ(−3/5, −4/5)
    The same picture a third time: The point (−3/5, −4/5) on the unit circle at 233.13°.
    As three picture moves

    A half turn moves across the center: (x, y) becomes (−x, −y). A full turn returns home: (x, y) remains (x, y). Reversing the signed travel reflects across the x-axis: (x, y) becomes (x, −y). These work even when t already includes several laps.

    Half turn: (x, y) becomes (−x, −y)

    Full turn: (x, y) becomes (x, y)

    Reverse travel: (x, y) becomes (x, −y)

    Right trianglePoint P(x, y), distance rUnit circle point (x, y)
    Works foracute anglesany angleany real number t
    sinopphypyry
    cosadjhypxrx
    tanoppadjyxyx
    csc, sec, cothypopp, hypadj, adjoppry,rx,xy1y,1x,xy

    Part 1: Read the coordinates of a unit point

    On a radius-1 track, the horizontal coordinate already is cosine and the vertical coordinate already is sine. There is no extra division for these two because their usual denominator is 1. Check that a given point really belongs on that track, then build the remaining ratios from its coordinates.

    • P(t) = (x, y) gives cos t = x and sin t = y only on the unit circle.
    • Check x2 + y2 = 1.
    • tan = yx, cot = xy, sec = 1x and csc = 1y whenever the denominator is nonzero.
    x = cos θy = sin θ(12/13, 5/13)
    The first coordinate is cosine and the second is sine.

    Worked example

    Read a new unit point

    P(u) = (1213, 513). Find sin u, cos u and tan u. In words, verify the point and read its coordinates.

    Show the steps and the answer
    x = cos θy = sin θ(12/13, 5/13)
    Read y for sine, x for cosine, then yx for tangent.
    1. (1213)2+(513)2=144169+25169=1.The sum confirms radius 1.
    2. sinu=513 and cosu=1213.On the unit circle sine is y and cosine is x.
    3. tanu=513÷1213=512.The common denominators cancel.
    Answer
    • sinu=513
    • cosu=1213
    • tanu=512
    Double-check All are positive because both coordinates place the point in I.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: sinu=1213.
    That is the horizontal coordinate.
    ✓ Instead: sin u = 513, the vertical coordinate.

    Tips and tricks

    • Write cos = x first, then sin = y, to preserve the coordinate order.

    Part 2: A half turn: change both coordinate signs

    Walk half a lap forward or backward from any stopping point. You reach the point across the center of the track. Left becomes right and up becomes down, so both coordinates change sign. Adding π or subtracting π gives that same opposite point because those two trips differ by one full lap.

    • P(t+π)=P(t−π)=(−x,−y).
    • A half turn negates sine, cosine, secant and cosecant wherever defined. A zero value remains zero.
    • Tangent and cotangent keep their values when defined because both coordinates reverse signs.
    x = cos θy = sin θ(−12/13, −5/13)
    A half turn puts the original point directly across the center.

    Worked example

    Move across the center

    P(u) = (1213, 513). Find P(u + π), P(u − π) and tan(u + π). In words, walk half a lap and form the new ratio.

    Show the steps and the answer
    x = cos θy = sin θP(u + π)
    The new point lies in III, across from the original point in I.
    1. P(u+π)=(−1213,−513).A half turn reverses both coordinates.
    2. P(u−π)=(−1213,−513) too.Forward and backward half turns reach the same opposite point.
    3. tan(u+π)=(−513)÷(−1213)=512.Both signs reverse and cancel in the quotient.
    Answer
    • P(u+π)=(−1213,−513)
    • P(u−π)=(−1213,−513)
    • tan(u+π)=512
    Double-check The new point has the same squared coordinates and radius 1; its positive tangent fits III.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: P(u + π) changes only y.
    Changing only y is reflection across the x-axis, not a half turn.
    ✓ Instead: A half turn changes both x and y.

    Tips and tricks

    • Half turn means both signs. Check that the point changed to the opposite quadrant.

    Part 3: Full turns: keep both coordinates

    A complete lap returns you to your starting spot. Two laps, or a clockwise lap, do the same. The distance and direction of the trip can change while the stopping point remains fixed. Adding any whole-number multiple of 2π therefore keeps both coordinates and every defined trig value.

    • P(t + 2nπ) = P(t) for every integer n.
    • A full turn is 2π radians = 360°.
    • The values and undefined locations repeat after full turns; tangent also repeats after half turns.
    420° = 60° + 360°
    A full extra turn returns to the 60° terminal side.

    Worked example

    One extra lap after a special angle

    Find P(7π3) and sin 7π3. In words, remove a full turn and read the remaining 60° point.

    Show the steps and the answer
    x = cos θy = sin θ(1/2, (√3)/2)
    The extra lap changes travel, but the final coordinates stay the same.
    1. 7π3−2π=7π3−6π3=π3.Subtracting one full turn preserves the stopping point.
    2. P(π3)=(12,32).The 60° special-angle values give cosine first and sine second.
    3. P(7π3) is the same point, so sin7π3=32.A full lap keeps both coordinates.
    Answer
    • P(7π3)=(12,32)
    • sin7π3=32
    Double-check 420° − 360° = 60°, which gives the same ray in degrees.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Adding 2π changes both signs.
    Two π half turns reverse the signs twice and return them to their original values.
    ✓ Instead: Adding 2π changes neither coordinate.

    Tips and tricks

    • Remove complete laps before working with a large input.

    Part 4: Reverse the signed travel: reflect across the x-axis

    Start again at the rightmost point and reverse your entire trip. A counterclockwise trip becomes clockwise, or a clockwise trip becomes counterclockwise. The two stopping points are mirror images above and below the horizontal axis. Their horizontal coordinate stays the same, and their vertical coordinate changes sign. This describes P(−t), even when t includes several laps.

    • P(−t)=(x,−y).
    • cos(−t) = cos t and sin(−t) = −sin t.
    • Where defined, sec keeps its value, while tan, cot and csc change signs.
    x = cos θy = sin θ(−5/13, −12/13)
    Reversing the trip reflects the original upper-left point to the lower left.

    Worked example

    Reverse a trip to the upper left

    P(v) = (−513, 1213). Find P(−v), cos(−v) and sin(−v). In words, reverse the signed walk and read its mirror point.

    Show the steps and the answer
    x = cos θy = sin θP(−v)
    Reflection changes up to down while the point stays left.
    1. P(−v)=(−513,−1213).Reflection across the x-axis leaves x fixed and reverses y.
    2. cos(−v)=−513 and sin(−v)=−1213.Cosine reads the unchanged horizontal coordinate; sine reads the reversed vertical one.
    Answer
    • P(−v)=(−513,−1213)
    • cos(−v)=−513
    • sin(−v)=−1213
    Double-check The original is in II and the mirror is in III; both are left of the y-axis.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: P(−v)=(513,−1213).
    That reverses both coordinates and represents a half turn.
    ✓ Instead: Keep x = −513 and reverse only y.

    Tips and tricks

    • The minus inside P(−t) reverses travel; it is not a command to negate both coordinates.

    5 How

    1. For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.
    2. Read x and y from the Terminal point P(t), and check x2 + y2 = 1 if a point is supplied.
    3. Write cos t = x and sin t = y.
    4. Use tan = yx, cot = xy, sec = 1x and csc = 1y, checking each denominator.
    5. For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.
    6. For several moves, apply them one at a time and check the resulting quadrant.

    Read a unit-circle point and move it

    1
    Are you given a point?
    YesCheck x2 + y2 = 1; read cos = x and sin = y.
    NoConvert the signed travel to a familiar angle and locate the point.
    ↓
    2
    Is the input changed by a full-turn multiple 2nπ?
    YesKeep both coordinates.
    NoCheck for a half turn or reversed travel.
    ↓
    3
    Does the change reverse the travel, replacing t with −t?
    YesReflect across the x-axis: keep x and negate y.
    NoIf the requested change is t + π or t − π, negate both coordinates. For a different change, locate the new point by its stated travel.
    ↓
    4
    Is a requested function's denominator zero?
    YesWrite undefined.
    NoForm and simplify the ratio.
    1. For travel t, begin at (1, 0); travel distance |t| in the direction given by its sign.
    2. Read x and y from the Terminal point P(t), and check x2 + y2 = 1 if a point is supplied.
    3. Write cos t = x and sin t = y.
    4. Use tan = yx, cot = xy, sec = 1x and csc = 1y, checking each denominator.
    5. For t ± π, flip both signs. For −t, flip only y. For a full-turn change 2nπ, keep both coordinates.
    6. For several moves, apply them one at a time and check the resulting quadrant.

    6 Worked example

    Worked example

    Clockwise travel to t = −19π6: terminal point by symmetry and the six functions

    A point starts at (1, 0) on the unit circle x2 + y2 = 1 and travels clockwise a distance of 19π6, so it marks the real number t = −19π6. You may use P(π6) = (32, 12). Describe where the travel ends. Then find the terminal point P(t) by applying the symmetry rules one move at a time, name its quadrant and confirm that it lies on the unit circle. Finally, find the exact values of sin t, cos t, tan t, cot t, sec t and csc t, rationalizing every denominator.

    Show the steps and the answer
    x = cos θy = sin θP
    Unit circle showing the terminal point P of t = −19π6 at (−32, 12) in Quadrant II.
    1. Locate the end of the travel. Split the distance: 19π6=2π+π+π6. Going clockwise from (1, 0), the 2π is one full turn back to (1, 0). The π is a half turn to (−1,0). The last π6 carries the point on from (−1,0) toward (0, 1), so P(t) is in Quadrant II.t is negative, so the point travels clockwise a distance |t| = 19π6. Clockwise motion passes (1, 0), (0, −1), (−1, 0) and (0, 1) in that order, so a point just past (−1, 0) is in Quadrant II.
    2. Write t as moves applied to π6: t=−π6−π−2π.−π6 − 6π6 − 12π6 = −19π6. Each move (change the sign, subtract π, subtract 2π) has a known effect on the coordinates of P(π6).
    3. Move 1: P(−π6)=(32,−12), in Quadrant IV.P(−t) = (x, −y): changing the sign of t flips only the y-coordinate of P(π6) = (32, 12).
    4. Move 2: P(−π6−π)=(−32,12), in Quadrant II.P(t − π) = (−x, −y): subtracting π is a half turn, which flips both signs of (32, −12).
    5. Move 3: P(−π6−π−2π)=(−32,12), still in Quadrant II. So P(−19π6)=(−32,12).P(t + 2nπ) = (x, y) with n = −1: a full turn keeps both coordinates. Quadrant II agrees with the travel in the first step.
    6. Check the point: (−32)2+(12)2=34+14=1.Every terminal point lies on x2 + y2 = 1. Sign flips do not change x2 or y2, so this also confirms the supplied point P(π6).
    7. Read x=−32 and y=12. Write cost=−32 and sint=12.The unit-circle definition is P(t) = (cos t, sin t). Cosine is the x-coordinate and sine is the y-coordinate.
    8. Check the denominators: x=−32≠0 and y=12≠0.tan t and sec t divide by x, and cot t and csc t divide by y. Both are nonzero, so all four functions are defined here.
    9. tant=yx=12·(−23)=−13=−33, and cott=xy=(−32)·2=−3.Dividing by a fraction is the same as multiplying by its reciprocal. Multiplying the top and bottom of −13 by 3 removes the root from the denominator.
    10. sect=1x=−23=−233, and csct=1y=2.The reciprocal of −32 is −23, which is rationalized by multiplying top and bottom by 3. The reciprocal of 12 is 2.
    Answer
    P(−19π6) = (−32, 12), in Quadrant II. sin t = 12, cos t = −32, tan t = −33, cot t = −3, sec t = −233, csc t = 2.
    Double-check Add two full turns (n = 2): t + 4π = −19π6 + 24π6 = 5π6. This lies between π2 and π, so P(t) = P(5π6) is in Quadrant II with x < 0 and y > 0, as found. The signs fit Quadrant II: sin t and csc t are positive, and cos t, tan t, cot t and sec t are negative. Each reciprocal pair multiplies to 1: (12)(2) = 1, (−32)(−233) = 66 = 1 and (−33)(−3) = 33 = 1.

    Work to write

    1. 19π6 = 2π + π + π6 clockwise from (1, 0), ending in Quadrant II
    2. t=−π6−π−2π
    3. P(−π6)=(32,−12)
    4. P(−π6−π)=(−32,12)
    5. P(−19π6) = (−32, 12), Quadrant II
    6. (−32)2+(12)2=34+14=1
    7. cost=−32,sint=12
    8. tan t = −33, cot t = −3
    9. sec t = −233, csc t = 2

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 4

    The starting point after laps

    Find sin 4π and cos 4π. In words, read the point after two full counterclockwise laps.

    Show the steps and the answer
    x = cos θy = sin θ(1, 0)
    Two full laps return to the start.
    1. 4π=2×2π, so P(4π)=(1,0).Two full laps return to the rightmost starting point.
    2. sin4π=0 and cos4π=1.Sine is y and cosine is x.
    Answer
    • sin 4π = 0
    • cos 4π = 1
    Double-check 4π radians is 720°, the axis value already rebuilt.

    Rung 2 of 4

    Six values from a new point

    P(u) = (817, 1517). Find all six functions. In words, check the unit point, read its coordinates and form four ratios.

    Show the steps and the answer
    x = cos θy = sin θ(8/17, 15/17)
    The higher y-coordinate gives the larger sine.
    1. 64289+225289=289289=1.The squared coordinates confirm radius 1.
    2. sinu=1517 and cosu=817.Read y and x respectively.
    3. tanu=158,cotu=815,secu=178,cscu=1715.The shared 17s cancel in quotients; dividing 1 by a nonzero fraction flips it.
    Answer
    • sinu=1517
    • cosu=817
    • tanu=158
    • cot u = 815
    • sec u = 178
    • csc u = 1715
    Double-check Every value is positive in I; sec u × cos u = 178 × 817 = 1.

    Rung 3 of 4

    Half turn and reverse travel

    P(u) = (1213, 513). Find P(u − π), P(−u) and their tangents. In words, distinguish the opposite point from the mirror point.

    Show the steps and the answer

    Original: (1213, 513)

    Half turn: (−1213, −513)

    Reverse: (1213, −513)

    1. P(u−π)=(−1213,−513).A backward half turn reverses both coordinates.
    2. P(−u)=(1213,−513).Reversing the original signed walk reflects only y.
    3. tan(u−π)=512; tan(−u)=−512.The half-turn ratio reverses both signs; the reflection ratio reverses only its numerator.
    Answer
    • P(u−π)=(−1213,−513)
    • P(−u)=(1213,−513)
    • tan(u−π)=512
    • tan(−u)=−512
    Double-check The half-turn point is in III and its tangent is positive; the reflection is in IV and its tangent is negative.

    Rung 4 of 4

    Combine reflection, half turn and full turn

    P(v) = (−513, 1213). Find P(−v + 3π) and all six functions there. In words, reverse the walk, then add one half turn and one full turn.

    Show the steps and the answer
    x = cos θy = sin θ(5/13, 12/13)
    Reflection and a half turn send the original upper-left point to the upper right.
    1. First P(−v)=(−513,−1213).Reflection across the x-axis keeps x and reverses y.
    2. Write 3π=π+2π.This separates a half turn, which changes signs, from a full turn, which keeps them.
    3. P(−v+π)=(513,1213), and adding 2π keeps that point.The half turn reverses both coordinates; the final full lap changes neither.
    4. sin(−v+3π)=1213,cos(−v+3π)=513.Read y and x from the final point.
    5. tan=125,cot=512,sec=135,csc=1312.Form the quotients and reciprocals using the nonzero final coordinates.
    Answer
    • P(−v+3π)=(513,1213)
    • sin=1213
    • cos=513
    • tan=125
    • cot = 512
    • sec = 135
    • csc = 1312
    Double-check The final point lies in I, so all six values are positive. Its squared coordinates still sum to 1.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: P(−t)=(−x,−y).
    Both sign changes describe a half turn. Reversing travel gives an x-axis reflection instead.
    ✓ Instead: P(−t)=(x,−y);P(t+π)=(−x,−y).
    ✗ Not this: t = −π means walking a negative distance.
    Distance cannot be negative. The sign records direction; |−π| = π is the distance.
    ✓ Instead: Walk distance π clockwise from (1, 0).
    ✗ Not this: Any supplied point can be read as (cos t, sin t).
    That shortcut needs radius 1. For (2, 2), x2 + y2 = 8, so it is not on the unit circle.
    ✓ Instead: Use r = 8 = 22 and divide by r, or normalize to (22, 22).

    Tips and tricks

    • Know P(t) = (cos t, sin t) cold: c before s, x before y is the memory cue.
    • Sketch the starting point on the right before a signed walk. A negative input reverses travel.
    • Rebuild half-turn and reflection rules from the picture. Put the coordinate formulas on the cheat sheet.
    • A point may have infinitely many real-number inputs t because full laps return to it. You need its coordinates, not one unique t.
    • Read reference tables by columns: keep the input label and its output in the same vertical column.

    7 The trap

    Swapping x and y. The point is P(t) = (cos t, sin t): cosine comes first, as x does. Alphabetical order helps: c before s, x before y.

    Keep in mind

    • The first number is always cos t: P(t) = (0.28, 0.96) means cos t = 0.28 and sin t = 0.96.
    • A point is on the unit circle only if x2 + y2 = 1: (0.5, 0.5) is not, since 0.25 + 0.25 = 0.5.
    • Half a lap flips both signs and walking backward flips only y: if P(t) = (0.28, 0.96), then P(t + π) = (−0.28, −0.96) and P(−t) = (0.28, −0.96).
    • tan and sec need x ≠ 0, and cot and csc need y ≠ 0: at P(t) = (0, 1), tan t = 10 is undefined.

    Memory hook

    The point is (cos t, sin t): alphabetical, c before s as x before y. Positive t walks counterclockwise, negative t walks clockwise.

    Flash cards

    Say the answer out loud, then flip.

    What is the unit circle?
    The circle of radius 1 centered at the origin.
    What is the terminal point P(t)?
    Where you stop after traveling t along the unit circle from (1, 0). It is (cos t, sin t).
    What equation does every point (x, y) on the unit circle satisfy?
    x2+y2=1
    P(t) = (−4041, −941) is on the unit circle. Find cos t, sin t and tan t.
    • cost=−4041
    • sint=−941
    • tant=940
    P(t) = (−1517, 817). Find P(t + π) and P(−t).
    • P(t + π) = (1517, −817), since half a lap flips both signs
    • P(−t) = (−1517, −817), since walking backward flips only y
    P(t) = (0.96, 0.28). Is sin t = 0.96?
    No. The first number is cos t = 0.96. sin t is the second number, 0.28.

    Comes back in