Quarry School

Read domain and range as shadows of a graph

Subject: MathematicsLeans on: CoordinatesLeans on: Solving for an input
Level 2 · BuildingAbout 23 min read14 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Imagine shining a light straight down onto a graph.

    Rule

    Domain = the graph's horizontal shadow on the x-axis.
    Range = its vertical shadow on the y-axis; include a coordinate if any included point reaches it.

    Step

    1. 1. Identify the x-axis as the input axis and the y-axis as the output axis; read their units.

    2. 2. Sweep left to right and collect all input positions covered by included graph points.

    3. 3. Sweep bottom to top and collect all reached output heights.

    4. 4. Check boundary dots. A hollow point excludes only that point, so look for other points sharing its coordinate.

    5. 5. Follow arrows beyond the visible window, and preserve genuine gaps with unions.

    6. 6. Write each interval from smaller to larger and label estimates from a data graph as approximate.

    Question

    Read the pictured curve’s domain and range. It has an included start at (6, 2) and continues rightward and downward without bound. You are collecting its horizontal input positions and vertical output heights.

    Answer

    Domain: [6, ∞).
    Range: (−∞, 2].

    Trap

    Deleting an output height because one point at that height is hollow. Look across the whole graph. A different included point can still put that height in the range.

    Strategy

    1. 1. Identify the x-axis as the input axis and the y-axis as the output axis; read their units.

    2. 2. Sweep left to right and collect all input positions covered by included graph points.

    3. 3. Sweep bottom to top and collect all reached output heights.

    4. 4. Check boundary dots. A hollow point excludes only that point, so look for other points sharing its coordinate.

    5. 5. Follow arrows beyond the visible window, and preserve genuine gaps with unions.

    6. 6. Write each interval from smaller to larger and label estimates from a data graph as approximate.

    Term

    Function

    Definition

    A rule assigning exactly one output to each allowed input. Different inputs may share an output.

    Term

    Input

    Definition

    The value you choose or supply to a function before its rule calculates an output.

    Term

    Output

    Definition

    The result a function produces from a chosen allowed input.

    Term

    Formula

    Definition

    A mathematical recipe describing how quantities are related or how to calculate a result.

    Term

    Domain

    Definition

    The set of all inputs allowed for a function, considering its arithmetic and any stated context or restrictions.

    Term

    Range

    Definition

    The set of all outputs a function actually produces from its allowed inputs.

    Term

    Set

    Definition

    A collection of distinct objects or values. Its members may be listed or described by a condition.

    Term

    Ordered pair

    Definition

    Two values written in a fixed order, usually (x, y): input first, output second. Reversing them usually changes the point.

    Term

    Coordinate

    Definition

    One number describing a point's position along an axis. In (x, y), x is horizontal and y is vertical.

    Term

    Restriction

    Definition

    A condition limiting allowed inputs, from arithmetic, a stated rule, or a meaningful physical situation.

    Term

    Positive

    Definition

    Strictly greater than 0. Zero is excluded.

    Term

    Negative

    Definition

    Strictly less than 0. Negative numbers lie to the left of 0 on a number line.

    Term

    Number line

    Definition

    A straight line placing real numbers in order, with smaller numbers left and greater numbers right.

    Term

    Interval notation

    Definition

    Describing a continuous stretch of real numbers with its limits. Brackets include endpoints; parentheses exclude them. Infinity always takes a parenthesis.

    Term

    Interval

    Definition

    A set containing every real number between its limits, with endpoints included or excluded as specified. It may extend without bound.

    Term

    Endpoint

    Definition

    A finite boundary value at an interval's end, included or excluded according to its bracket or parenthesis.

    Term

    Bracket

    Definition

    The interval symbols [ and ], indicating that the adjacent finite endpoint belongs to the set.

    Term

    Parenthesis

    Definition

    In interval notation, ( or ) excludes the adjacent finite endpoint. It also appears beside infinity, which is never an included number.

    Term

    Infinity

    Definition

    The symbol ∞ describes continuing without a finite bound. It is not a real number or an endpoint you can include.

    Term

    Unbounded

    Definition

    Having no finite limit in at least one direction. A set can be bounded on one side and unbounded on the other.

    Term

    Graph

    Definition

    A picture of points representing input and output pairs, usually with inputs horizontal and outputs vertical.

    Term

    x-axis

    Definition

    The horizontal axis measuring x-values, usually function inputs. Every point on it has y = 0.

    Term

    y-axis

    Definition

    The vertical axis measuring y-values, usually function outputs. Every point on it has x = 0.

    Term

    Piece

    Definition

    One formula together with the input condition telling you where it is used in a piecewise function.

    Term

    Boundary

    Definition

    An input where an interval starts or ends, or where a piecewise condition changes. Check which condition includes it.

    Term

    Parabola

    Definition

    The bowl-shaped curve that graphs a quadratic function. It may open upward or downward.

    Term

    Substitution

    Definition

    Replacing every occurrence of a variable with one specified value, then following the formula's operations.

    1 In plain words

    Imagine shining a light straight down onto a graph. The shadow on the horizontal number line shows every input position the graph visits. That shadow is the domain. Now shine a light from the side. The shadow on the vertical number line shows every output height the graph reaches. That shadow is the range. You are collecting coordinates, not measuring the length of the curve. A curve can turn around, cross the same height twice, or have separate pieces. You still collect each covered input or output once, and leave a gap only when no included point reaches that coordinate.

    2 Picture it

    (0, 0)domainrange−222468(0, 0)domainrange−3−2−11232468
    For the full square function the horizontal shadow continues both ways.

    Reminder

    Reminder: Coordinates, Solving for an input
    • Coordinates. The point (2, 4) has input coordinate 2 and output coordinate 4.
    • Solving for an input. y = −2x + 3 gives x = 3−y2, an input for any chosen real y.

    3 Why

    Every point on a function graph is an ordered pair (x, y). Its horizontal coordinate tells which input was used; its vertical coordinate tells the resulting output. Projecting every included point onto an axis therefore collects exactly the relevant set. A hollow point excludes that point alone. Another point with the same x or y may keep that coordinate in a shadow. Arrows indicate continuation beyond the viewing window, so the edge of a picture is not automatically an endpoint. The answer describes the function's graph, not the camera frame.

    4 The rule

    Domain = the graph's horizontal shadow on the x-axis.

    Range = its vertical shadow on the y-axis; include a coordinate if any included point reaches it.

    The same idea, five ways

    Say it

    Say domain as horizontal shadow and range as vertical shadow.

    Write it

    An included graph point contributes its x-coordinate to the domain and its y-coordinate to the range.

    In math
    • For the pictured original curve:
    • Horizontal extent: x ≥ 6
    • Domain: {x | x ≥ 6} = [6, ∞)
    • Vertical extent: y ≤ 2
    • Range: {y | y ≤ 2} = (−∞, 2]
    • For the textbook graph in the ladder:
    • Horizontal extent: −3 < x ≤ 1
    • Domain: {x | −3 < x ≤ 1} = (−3, 1]
    • Vertical extent: −4 ≤ y ≤ 0
    • Range: {y | −4 ≤ y ≤ 0} = [−4, 0]
    Like

    Two lights project the same curve onto two different walls.

    See it
    included start(7, 1)(10, 0)domainrange46810121416−224
    For this pictured curve, the input shadow starts at 6 and the output shadow ends at 2.

    The same idea, other ways

    As two shadows

    Drop every graph point onto the x-axis to gather the domain. Push every graph point sideways onto the y-axis to gather the range. The two shadows can have different limits.

    domainrange2468−11234
    The square root graph starts at zero on both axes and continues upward and rightward.
    As addresses

    Every graph point carries an address (input, output). If the graph contains (2, 4), then 2 belongs to the domain and 4 belongs to the range. One address supplies membership on both axes.

    With a turning graph

    For y = x2 on −2 < x ≤ 2, the left point (−2, 4) is absent. The right point (2, 4) is present. The input −2 is excluded, but the output 4 is still reached.

    As a camera frame

    A window may show a line only between x = −3 and x = 3. If arrows continue past the frame, those marks are viewing limits, not domain endpoints. Ask what the graph does beyond the picture.

    Part 1: A bounded graph with endpoints

    A bounded graph fits between finite input limits or output limits. Inclusion belongs to a coordinate whenever the graph actually reaches it. A turn in the curve can make its lowest output occur in the middle rather than at an endpoint.

    • Read all reached heights, including a high or low point inside the interval.
    • Use brackets for reached endpoint coordinates.
    • One missing point does not remove a coordinate reached somewhere else.
    lowest heightleft boundary locationright boundary location−22246
    y=x2.

    Reminder

    Reminder: Coordinates, Solving for an input
    • Coordinates. The point (2, 4) has input coordinate 2 and output coordinate 4.
    • Solving for an input. y = −2x + 3 gives x = 3−y2, an input for any chosen real y.

    The same idea, five ways

    Say it

    Say inputs after negative two through two; outputs zero through four.

    Write it

    Removing (−2, 4) does not remove height 4 when (2, 4) still belongs.

    In math
    • −2<x≤2
    • Domain: {x | −2 < x ≤ 2} = (−2, 2]
    • 0 ≤ y ≤ 4
    • Range: {y | 0 ≤ y ≤ 4} = [0, 4]
    Like

    A fence marks finite positions a path may reach.

    See it
    lowest heightleft boundary locationright boundary location−22246
    The same picture again: y = x2.

    Worked example

    A dipping curve that starts at a hollow dot

    The graph shown is one unbroken curve, part of the parabola y = (x − 1)2 − 3. The horizontal axis is x and the vertical axis is y. Both are plain number lines with no units. The curve starts at a hollow dot at (−2, 6). It falls to its lowest point (1, −3), then rises without a break to a solid dot at (3, 1). There are no arrows on the graph. Find the domain and the range of the graph, and write each as an interval.

    (−2, 6) hollow(1, −3) lowest point(3, 1) solid−22−4−2246
    The piece of the parabola y = (x − 1)2 − 3 for x from −2 to 3.
    Show the steps and the answer
    1. Identify the axes. The horizontal x-axis is the input axis and the vertical y-axis is the output axis. Both carry plain numbers with no units, so the domain and the range will be sets of plain numbers.The domain collects inputs, so it is read along the x-axis. The range collects outputs, so it is read along the y-axis. Settling this first stops the two shadows from being swapped.
    2. Sweep a vertical line from left to right. The horizontal shadow begins at x=−2, where the hollow dot (−2,6) sits, and ends at x=3, where the solid dot (3, 1) sits. The curve has no breaks in between, so the shadow covers every x from −2 to 3. Whether each end belongs is settled when the dots are checked below.The domain is the graph's horizontal shadow on the x-axis: every x that has an included point of the graph directly above or below it. An unbroken curve casts an unbroken shadow.
    3. Sweep a horizontal line from bottom to top. The lowest height it meets is y=−3, at the turning point (1,−3). From there the curve rises on both sides. On the right it climbs only to height 1 at the solid dot. On the left it climbs toward height 6 at the hollow dot. So the vertical shadow covers every height from −3 up to 6. The point (1,−3) lies in the middle of the unbroken curve, so it is included and −3 is reached. Whether 6 itself is reached is checked at the hollow dot below.The range is the graph's vertical shadow on the y-axis: every height reached by an included point. On a curve that dips, the lowest height can come from a turning point instead of an endpoint. Reading only the endpoint heights 6 and 1 would miss the dip to −3.
    4. Check the solid dot (3, 1). It is part of the graph, so x=3 is in the domain. Its height 1 already lies between −3 and 6, so it adds nothing new to the range.A solid dot is an included point, so both of its coordinates are reached.
    5. Check the hollow dot (−2,6) for its input. The vertical line x=−2 meets the graph only at this hollow dot, because the curve starts there. No other point has x=−2, so −2 is not in the domain.A hollow dot excludes only that one point. Its x-value is lost only when no included point shares it, and here none does.
    6. Check the hollow dot (−2,6) for its output. Every other point of the piece is lower than 6. The left part falls away from 6 toward (1,−3), and the right part climbs back only to 1. So no included point has height 6, and 6 is not in the range, even though every height just below 6 is reached.A height belongs to the range only if some included point reaches it. Height 6 belongs to the hollow dot alone.
    7. Look for arrows and gaps. Both ends of the curve finish at dots, there are no arrows, and there are no breaks or missing points between the ends.With no arrows, nothing continues beyond the drawn piece. With no gaps, each shadow is a single interval, so no union is needed.
    8. Write each interval from its smaller end to its larger end. Use a round bracket for an excluded end and a square bracket for an included end: domain (−2,3], range [−3,6). The numbers are exact, not estimates.Interval notation lists the smaller number first. The one hollow dot gives the domain a round bracket on the left, because −2 is the domain's smaller end. It gives the range a round bracket on the right, because 6 is the range's larger end. Every coordinate is stated exactly, so no 'approximately' label is needed; that label is only for readings estimated from a data graph.
    Answer
    Domain: (−2, 3], that is −2 < x ≤ 3. Range: [−3, 6), that is −3 ≤ y < 6.
    Double-check Use y = (x − 1)2 − 3. The three marked points fit the curve: x = −2 gives (−3)2 − 3 = 6, x = 1 gives 0 − 3 = −3, and x = 3 gives 22 − 3 = 1. Top end: (x − 1)2 − 3 = 6 gives (x − 1)2 = 9, so x = −2 or x = 4. The point at x = −2 is the hollow dot, and x = 4 lies past the solid end at x = 3. So no included point has height 6, which confirms the round bracket at 6. Bottom end: (x − 1)2 is never negative, so y ≥ −3 everywhere. The value y = −3 occurs at x = 1, inside (−2, 3], which confirms the square bracket at −3. A height inside the range, y = 4: (x − 1)2 = 7 gives x = 1 − 7 ≈ −1.65, which lies in (−2, 3], so 4 is reached, as the range claims. Sizes: the domain is 3 − (−2) = 5 units wide and the range is 6 − (−3) = 9 units tall.

    Work to write

    1. x-axis = input, y-axis = output; plain numbers, no units
    2. Hollow dot (−2, 6): no other point has x = −2, so −2 is not in the domain
    3. Solid dot (3, 1): 3 is in the domain
    4. Domain: (−2, 3]
    5. Lowest point (1, −3) is on the curve, so −3 is in the range
    6. Height 6 occurs only at the hollow dot, so 6 is not in the range
    7. Range: [−3, 6)
    8. No arrows and no gaps: each shadow is one interval, and the values are exact

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The open point (−2, 4) removes height 4 from the restricted square graph.
    The included point (2, 4) still reaches that height.
    ✓ Instead: Domain (−2, 2]; range [0, 4].

    Tips and tricks

    • Check the whole curve before removing an output height.

    Part 2: An unbounded graph

    Unbounded means the graph continues without a finite limit in the direction being discussed. Arrows are a promise of continuation. They do not turn infinity into a point. A nonhorizontal line reaches arbitrarily large positive and negative heights as you travel along it.

    • Infinity always takes a parenthesis.
    • A viewing window is not an input restriction.
    • To check a line's full range, solve for the input that produces an arbitrary output.
    (0, 3)(1.5, 0)domainrange−4−224−44812
    y=−2x+3.

    Reminder

    Reminder: Coordinates, Solving for an input
    • Coordinates. The point (2, 4) has input coordinate 2 and output coordinate 4.
    • Solving for an input. y = −2x + 3 gives x = 3−y2, an input for any chosen real y.

    The same idea, five ways

    Say it

    Say the line continues without an input or output limit.

    Write it

    The stated continuation extends the line beyond the viewing frame.

    In math
    • y=−2x+3
    • x=3−y2
    • Domain: {x | x is real} = (−∞, ∞)
    • Range: {y | y is real} = (−∞, ∞)
    Like

    A long road continues beyond the edge of a photograph.

    See it
    (0, 3)(1.5, 0)domainrange−4−224−44812
    The same picture again: y = −2x + 3.

    Worked example

    A viewing window does not stop a line

    The picture shows part of y = −2x + 3. Its caption states that the line continues in both directions, and no input restriction is supplied. Find domain and range. This asks which input positions and output heights belong to the entire line.

    (0, 3)(1.5, 0)domainrange−4−224−44812
    The same picture a third time: y = −2x + 3.
    Show the steps and the answer
    1. We need every allowed input and every output the rule actually reaches.State what is being found before choosing the calculation.
    2. Keep every real x.Multiplication and addition are defined for every real input, and the caption states that the line continues.
    3. To reach a chosen output y, solve y=−2x+3.Finding an input for every proposed output checks the entire range.
    4. Subtract 3 and divide by −2: x=3−y2.The number −2 multiplying x is nonzero, so dividing by it gives a real input for every real y.
    5. Write all real numbers for both sets.Neither input positions nor output heights stop at the window's edges.
    Answer
    • Domain: (−∞, ∞).
    • Range: (−∞, ∞).
    Double-check To reach y = 13, choose x = −5: −2(−5) + 3 = 13. This output can lie beyond a small visible graph window.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The displayed frame supplies the line's last input.
    The caption states that the line continues, and the formula supplies no finite endpoint.
    ✓ Instead: For y = −2x + 3, both domain and range are (−∞, ∞).

    Tips and tricks

    • Distinguish an arrow from an endpoint marker.

    Part 3: A graph of real data

    A graph from measurements has labels and units as well as a curve. Read the years on one axis and the measured quantity on the other. If the curve falls between grid lines, say that your limits are approximate instead of treating a visual estimate as an exact number.

    • The oil graph's visible inputs run from about 1973 through 2008.
    • Its output unit is thousands of barrels of oil per day.
    • The visible range is approximately [180, 2010] in that unit.
    • A continuous plotted model fills a time span; a table listing separate yearly observations gives only those listed years.

    Visible years: [1973, 2008]

    Production: about [180, 2010]

    Output unit: thousand barrels per day

    Reminder

    Reminder: Coordinates, Solving for an input
    • Coordinates. The point (2, 4) has input coordinate 2 and output coordinate 4.
    • Solving for an input. y = −2x + 3 gives x = 3−y2, an input for any chosen real y.

    The same idea, five ways

    Say it

    Say the visible years and production levels with their units.

    Write it

    The oil graph describes a shown time span and approximately read production levels.

    In math
    • 1973 ≤ t ≤ 2008
    • Visible domain: [1973, 2008]
    • 180 ≤ b ≤ 2010, approximately
    • Visible range: approximately [180, 2010] thousand barrels per day
    Like

    Read a measuring instrument's units before interpreting its marks.

    See it

    Visible years: [1973, 2008]

    Production: about [180, 2010]

    Output unit: thousand barrels per day

    Worked example

    Textbook: a visible oil-production graph

    OpenStax problem

    For the portion of the textbook oil-production graph shown, the horizontal extent is about 1973 through 2008 and the vertical extent is about 180 through 2010 thousand barrels per day. State the visible domain and range with units.

    Visible domain: [1973, 2008], in years.

    Visible range: approximately [180, 2010], in thousand barrels per day.

    Show the steps and the answer
    1. We need every allowed input and every output the rule actually reaches.State what is being found before choosing the calculation.
    2. Identify the input as year and the output as oil production.The horizontal axis records time, and the vertical axis records thousands of barrels per day.
    3. Write [1973, 2008] for the visible domain.These are the first and last years in the portion being described, with endpoints included in the displayed model.
    4. Write approximately [180, 2010] for the range.These are the estimated smallest and largest plotted production levels, not output years.
    5. Retain thousand barrels per day as the output unit.180 on this vertical axis represents about 180000 barrels per day, not 180 barrels per day.
    6. Limit the claim to the shown portion of the graph.The supplied picture does not establish the behavior outside its displayed time span.
    Answer
    • Visible domain: [1973, 2008], in years.
    • Visible range: approximately [180, 2010], in thousand barrels per day.
    Double-check Multiplying the vertical limits by 1000 gives approximately 180000 through 2010000 barrels per day. These are approximate graph readings rather than exact algebraic bounds.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The output 180 means 180 barrels per day.
    The oil-production axis is measured in thousands of barrels per day.
    ✓ Instead: 180 on this axis represents about 180000 barrels per day.

    Tips and tricks

    • Write the unit immediately beside every approximate limit.

    5 How

    1. Identify the x-axis as the input axis and the y-axis as the output axis; read their units.
    2. Sweep left to right and collect all input positions covered by included graph points.
    3. Sweep bottom to top and collect all reached output heights.
    4. Check boundary dots. A hollow point excludes only that point, so look for other points sharing its coordinate.
    5. Follow arrows beyond the visible window, and preserve genuine gaps with unions.
    6. Write each interval from smaller to larger and label estimates from a data graph as approximate.

    Read the graph's two shadows

    1
    Does a boundary point belong?
    YesKeep its coordinates in the two shadows.
    NoCheck whether another included point shares its x-coordinate or y-coordinate.
    ↓
    2
    Does an arrow continue beyond the window?
    YesFollow the indicated continuation instead of using the frame as an endpoint.
    NoRead the stated or drawn finite limits.
    ↓
    3
    Is a coordinate gap reached nowhere?
    YesPreserve the gap with separate intervals.
    NoInclude that coordinate in the shadow.
    1. Identify the x-axis as the input axis and the y-axis as the output axis; read their units.
    2. Sweep left to right and collect all input positions covered by included graph points.
    3. Sweep bottom to top and collect all reached output heights.
    4. Check boundary dots. A hollow point excludes only that point, so look for other points sharing its coordinate.
    5. Follow arrows beyond the visible window, and preserve genuine gaps with unions.
    6. Write each interval from smaller to larger and label estimates from a data graph as approximate.

    6 Worked example

    Worked example

    Read a starting point and two directions

    Read the pictured curve’s domain and range. It has an included start at (6, 2) and continues rightward and downward without bound. You are collecting its horizontal input positions and vertical output heights.

    Show the steps and the answer
    included start(7, 1)(10, 0)domainrange46810121416−224
    The same picture again: y = −(x−6) + 2.
    1. Locate the start at input 6 and output 2.The first coordinate is horizontal input, and the second is vertical output.
    2. Project the entire curve onto the input axis: it begins at 6 and continues through every larger input.The curve continues rightward and has no gap in its horizontal shadow.
    3. Include input 6 and write [6,∞).The starting point belongs, so the domain begins with a bracket.
    4. Project onto the output axis: the highest height is 2 and the curve continues through every smaller height.The curve moves downward without a break or a lowest height.
    5. Write (−∞,2] for the range.Height 2 belongs, smaller heights continue without limit, and limits are written in increasing order.
    Answer
    • Domain: [6, ∞).
    • Range: (−∞, 2].
    Double-check The included start contributes 6 to the domain and 2 to the range. The visible points (7, 1) and (10, 0) confirm the rightward and downward direction; the stated continuation extends both shadows beyond the frame.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 5

    Read a starting point and two directions

    Read the pictured curve’s domain and range. It has an included start at (6, 2) and continues rightward and downward without bound. You are collecting its horizontal input positions and vertical output heights.

    Show the steps and the answer
    included start(7, 1)(10, 0)domainrange46810121416−224
    The same picture a third time: y = −(x−6) + 2.
    1. Locate the start at input 6 and output 2.The first coordinate is horizontal input, and the second is vertical output.
    2. Project the entire curve onto the input axis: it begins at 6 and continues through every larger input.The curve continues rightward and has no gap in its horizontal shadow.
    3. Include input 6 and write [6,∞).The starting point belongs, so the domain begins with a bracket.
    4. Project onto the output axis: the highest height is 2 and the curve continues through every smaller height.The curve moves downward without a break or a lowest height.
    5. Write (−∞,2] for the range.Height 2 belongs, smaller heights continue without limit, and limits are written in increasing order.
    Answer
    • Domain: [6, ∞).
    • Range: (−∞, 2].
    Double-check The included start contributes 6 to the domain and 2 to the range. The visible points (7, 1) and (10, 0) confirm the rightward and downward direction; the stated continuation extends both shadows beyond the frame.

    Rung 2 of 5

    Textbook: read the full horizontal and vertical extents

    OpenStax problem

    The textbook graph has a hollow left endpoint at x = −3 and an included right endpoint at x = 1. It covers every x between them, reaches y = −4 and y = 0, and covers every height between them. Find domain and range. This asks which input positions and output heights belong, including the endpoint decisions.

    −31(−3, 1]
    The horizontal shadow excludes −3 and includes 1; this matches the textbook graph’s endpoint dots.
    Show the steps and the answer
    −40[−4, 0]
    Range: [−4, 0]. The endpoint symbols record which limits belong.
    1. We need every allowed input and every output the rule actually reaches.State what is being found before choosing the calculation.
    2. Read the horizontal extent from −3 through 1.The x-coordinate is the input, so the horizontal shadow gives the domain.
    3. Exclude −3, include 1, and write (−3,1].The left endpoint is hollow and no other point has x = −3. The right endpoint is included. Input endpoints and output endpoints are separate decisions.
    4. Read the vertical extent from −4 through 0.The y-coordinate is the output, and the smaller height must be written first.
    5. Include both reached heights and write [−4,0].Every height between them is reached, including the endpoints.
    Answer
    • Domain: (−3, 1].
    • Range: [−4, 0].
    Double-check Input −3 is absent and input 1 is present, matching the horizontal shadow. The graph reaches heights −4 and 0, so both range endpoints stay included. An output height of −2 belongs, while 1 does not; an input of 0 belongs, while −4 does not.

    Rung 3 of 5

    Shadows of an arch with one hollow end

    A graph is one unbroken arch that is part of the parabola y = −(x − 2)2 + 5. It is drawn on a grid with 1 unit per square on both axes. The arch starts at a hollow dot at (−1, −4), rises to its highest point (2, 5), and falls to a solid dot at (5, −4). It has no arrows and no breaks. Use the graph's shadows to write its domain and its range in interval notation.

    (−1, −4) hollow(2, 5)(5, −4) solid24−4−2246
    The arch y = −(x − 2)2 + 5 from x = −1 to x = 5.
    Show the steps and the answer
    1. Name the axes. The horizontal x-axis is the input axis and the vertical y-axis is the output axis. Each is marked 1 unit per grid square.The domain is read on the input axis and the range on the output axis, so we need to know where each shadow lands and what its marks count.
    2. Sweep left to right. The arch runs from its left end dot at x=−1 to its right end dot at x=5 and covers every x between them without a gap. So the horizontal shadow stretches from −1 to 5.The domain is every input that has a graph point directly above or below it. That set is the shadow the graph casts onto the x-axis.
    3. Sweep bottom to top. The lowest marked height is −4, shared by both end dots. The highest is 5, at the top point (2, 5). The curve passes through every height between them, so the vertical shadow stretches from −4 to 5.The range is every output height the graph reaches. That set is the shadow the graph casts sideways onto the y-axis.
    4. Check the boundary dots. No other point of the arch sits on the line x=−1, so the hollow dot (−1,−4) leaves −1 out of the domain. Height −4 is also reached by the solid dot (5,−4), so −4 stays in the range. The solid dot puts 5 in the domain, and the included top point (2, 5) puts 5 in the range.A hollow dot removes only its own point, not its coordinates. A coordinate drops out of a shadow only when no included point shares it.
    5. Look for arrows and gaps. There are none: the arch stops at its two end dots and has no breaks. So each shadow is a single interval and no union is needed.Arrows would carry a shadow past the visible window, and a genuine break would split a shadow into pieces joined by ∪. This graph has neither.
    6. Write each interval from smaller to larger. Use a round bracket for an excluded end and a square bracket for an included end: domain (−1,5], range [−4,5]. Both ends come from exact labeled points, not readings off a data graph, so no 'approximately' label is needed.Interval notation lists the left end first, and the bracket shape records whether each end belongs to the set.
    Answer
    Domain: (−1, 5]. Range: [−4, 5].
    Double-check Substitute into y = −(x − 2)2 + 5. x = −1 gives −9 + 5 = −4, x = 2 gives 5, and x = 5 gives −9 + 5 = −4, so all three labeled points lie on the parabola. At the ends: the vertical line x = −1 meets the graph only at the hollow dot, so −1 is not an input. The horizontal line y = −4 still meets the graph at the solid dot (5, −4), so −4 is an output. Inside: the height y = 0 is reached at x = 2 − 5 ≈ −0.24 and x = 2 + 5 ≈ 4.24, and both lie in (−1, 5]. No height above 5 is reached, because −(x − 2)2 is never positive.

    Work to write

    1. Domain: (−1, 5]
    2. Range: [−4, 5]
    3. −1 is excluded from the domain: the only point at x = −1 is the hollow dot (−1, −4)
    4. −4 is included in the range: the solid dot (5, −4) reaches height −4
    5. 5 is included in both: the solid dot at x = 5 and the top point (2, 5)

    Rung 4 of 5

    A viewing window does not stop a line

    The picture shows part of y = −2x + 3. Its caption states that the line continues in both directions, and no input restriction is supplied. Find domain and range. This asks which input positions and output heights belong to the entire line.

    (0, 3)(1.5, 0)domainrange−4−224−44812
    The same picture, shown 4 times now: y = −2x + 3.
    Show the steps and the answer
    1. We need every allowed input and every output the rule actually reaches.State what is being found before choosing the calculation.
    2. Keep every real x.Multiplication and addition are defined for every real input, and the caption states that the line continues.
    3. To reach a chosen output y, solve y=−2x+3.Finding an input for every proposed output checks the entire range.
    4. Subtract 3 and divide by −2: x=3−y2.The number −2 multiplying x is nonzero, so dividing by it gives a real input for every real y.
    5. Write all real numbers for both sets.Neither input positions nor output heights stop at the window's edges.
    Answer
    • Domain: (−∞, ∞).
    • Range: (−∞, ∞).
    Double-check To reach y = 13, choose x = −5: −2(−5) + 3 = 13. This output can lie beyond a small visible graph window.

    Rung 5 of 5

    Textbook: a visible oil-production graph

    OpenStax problem

    For the portion of the textbook oil-production graph shown, the horizontal extent is about 1973 through 2008 and the vertical extent is about 180 through 2010 thousand barrels per day. State the visible domain and range with units.

    Visible domain: [1973, 2008], in years.

    Visible range: approximately [180, 2010], in thousand barrels per day.

    Show the steps and the answer
    1. We need every allowed input and every output the rule actually reaches.State what is being found before choosing the calculation.
    2. Identify the input as year and the output as oil production.The horizontal axis records time, and the vertical axis records thousands of barrels per day.
    3. Write [1973, 2008] for the visible domain.These are the first and last years in the portion being described, with endpoints included in the displayed model.
    4. Write approximately [180, 2010] for the range.These are the estimated smallest and largest plotted production levels, not output years.
    5. Retain thousand barrels per day as the output unit.180 on this vertical axis represents about 180000 barrels per day, not 180 barrels per day.
    6. Limit the claim to the shown portion of the graph.The supplied picture does not establish the behavior outside its displayed time span.
    Answer
    • Visible domain: [1973, 2008], in years.
    • Visible range: approximately [180, 2010], in thousand barrels per day.
    Double-check Multiplying the vertical limits by 1000 gives approximately 180000 through 2010000 barrels per day. These are approximate graph readings rather than exact algebraic bounds.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: An open point at (−2, 4) means 4 is not in the range.
    The included point (2, 4) also supplies height 4 in the restricted square graph.
    ✓ Instead: For −2 < x ≤ 2 and y = x2, the range is [0, 4].
    ✗ Not this: The line picture ends at x = 4, so the domain ends at 4.
    The stated continuation extends the line beyond the displayed frame. A window border is not an assigned endpoint.
    ✓ Instead: For y = −2x + 3 with no restriction, the domain is (−∞, ∞).

    Tips and tricks

    • Label the axes input and output before reading their shadows.
    • Read the bottom height first when writing the range.
    • Look for another included point at a hollow point's height before excluding that height.

    7 The trap

    Deleting an output height because one point at that height is hollow. Look across the whole graph. A different included point can still put that height in the range.

    Comes back in

    Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.