Quarry School

Write the same set three ways

Subject: MathematicsLeans on: Compound conditionsLeans on: Order of numbers
Level 2 · BuildingAbout 14 min read15 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Think of directions for a stretch of road.

    Rule

    Use [ or ] for an included endpoint, ( or ) for an excluded endpoint or infinity.
    Write intervals from smaller to larger; union (∪) means or, including membership in both sets.

    Step

    1. 1. Identify the shaded or allowed portion of the number line.

    2. 2. Use the closed dot / open dot convention: a filled dot is included and a hollow dot is excluded.

    3. 3. State comparisons with <, >, ≤ or ≥ for inequality notation.

    4. 4. Put the condition after the bar in {x | condition} for set-builder notation.

    5. 5. Write the lower limit first and the upper limit second in interval notation.

    6. 6. For separate pieces, join conditions with or and intervals with ∪. Keep every gap that is actually excluded.

    Question

    A number line shades 1 through 3 with filled endpoints, and everything to the right of 5 with a hollow endpoint at 5. Describe the set three ways.

    Answer

    Inequality: 1 ≤ x ≤ 3 or x > 5.
    Set-builder: {x | 1 ≤ x ≤ 3 or x > 5}.
    Interval: [1, 3] ∪ (5, ∞).

    Trap

    Writing [1, ∞) for [1, 3] ∪ (5, ∞). That would fill the missing region after 3 through 5. The union symbol joins sets without filling gaps.

    Strategy

    1. 1. Identify the shaded or allowed portion of the number line.

    2. 2. Read a filled dot as included and a hollow dot as excluded.

    3. 3. State comparisons with <, >, ≤ or ≥ for inequality notation.

    4. 4. Put the condition after the bar in {x | condition} for set-builder notation.

    5. 5. Write the lower limit first and the upper limit second in interval notation.

    6. 6. For separate pieces, join conditions with or and intervals with ∪. Keep every gap that is actually excluded.

    Term

    Input

    Definition

    The value you choose or supply to a function before its rule calculates an output.

    Term

    Set

    Definition

    A collection of distinct objects or values. Its members may be listed or described by a condition.

    Term

    Element

    Definition

    One member of a set. Repeated appearances do not create additional members.

    Term

    Real number

    Definition

    A number with a position on the number line, including whole numbers, fractions, decimals and numbers such as 2.

    Term

    Inequality

    Definition

    A comparison using <, >, ≤ or >=. It describes which amount is smaller or larger and whether equality is allowed.

    Term

    Compound inequality

    Definition

    Two or more comparisons joined with and or or. And requires every condition; or requires at least one.

    Term

    Negative

    Definition

    Strictly less than 0. Negative numbers lie to the left of 0 on a number line.

    Term

    Number line

    Definition

    A straight line placing real numbers in order, with smaller numbers left and greater numbers right.

    Term

    Inequality notation

    Definition

    Writing allowed values with comparison signs, optionally joining conditions with and or or.

    Term

    Set-builder notation

    Definition

    Describing a set with a condition inside braces, such as {x | x > 3}, read as x such that x exceeds 3.

    Term

    Braces

    Definition

    The symbols { and } used to enclose a set's listed members or membership condition.

    Term

    Such that

    Definition

    The phrase introducing the condition members satisfy in set-builder notation. A vertical bar can stand for this phrase.

    Term

    Interval notation

    Definition

    Describing a continuous stretch of real numbers with its limits. Brackets include endpoints; parentheses exclude them. Infinity always takes a parenthesis.

    Term

    Interval

    Definition

    A set containing every real number between its limits, with endpoints included or excluded as specified. It may extend without bound.

    Term

    Endpoint

    Definition

    A finite boundary value at an interval's end, included or excluded according to its bracket or parenthesis.

    Term

    Lower limit

    Definition

    The smaller boundary of an interval, written first. It may be −∞ when there is no finite lower bound.

    Term

    Upper limit

    Definition

    The greater boundary of an interval, written second. It may be ∞ when there is no finite upper bound.

    Term

    Inclusive

    Definition

    Including the boundary value. Use ≤ or ≥ in a comparison, a bracket in interval notation, or a filled dot.

    Term

    Exclusive

    Definition

    Excluding the boundary value. Use < or > in a comparison, a parenthesis in interval notation, or a hollow dot.

    Term

    Bracket

    Definition

    The interval symbols [ and ], indicating that the adjacent finite endpoint belongs to the set.

    Term

    Parenthesis

    Definition

    In interval notation, ( or ) excludes the adjacent finite endpoint. It also appears beside infinity, which is never an included number.

    Term

    Infinity

    Definition

    The symbol ∞ describes continuing without a finite bound. It is not a real number or an endpoint you can include.

    Term

    Union (∪)

    Definition

    The set of elements belonging to either set or both. Shared elements are listed once, and the sets may overlap.

    Term

    Intersection

    Definition

    The set of elements shared by every specified set. For conditions, it keeps values satisfying all the conditions together.

    Term

    Closed dot / open dot

    Definition

    A filled dot includes the point. A hollow dot excludes it. Excluded points do not count in the vertical line test.

    Term

    Graph

    Definition

    A picture of points representing input and output pairs, usually with inputs horizontal and outputs vertical.

    Term

    Piece

    Definition

    One formula together with the input condition telling you where it is used in a piecewise function.

    Term

    Boundary

    Definition

    An input where an interval starts or ends, or where a piecewise condition changes. Check which condition includes it.

    1 In plain words

    Think of directions for a stretch of road. You can say which mile markers a driver may pass, state a condition for an allowed position, or write the beginning and ending markers. These are three descriptions of the same road. Inequality notation states the comparisons. Set-builder notation wraps the condition in braces and reads it as a collection. Interval notation writes the two limits. You must also say whether each boundary is part of the road. A filled dot means you may stand there; a hollow dot means you may get close but that exact position is excluded.

    2 Picture it

    135[1, 3] ∪ (5, ∞)
    [1, 3] and (5, ∞) on a number line.

    Reminder

    Reminder: Compound conditions, Order of numbers
    • Compound conditions. −2 ≤ x < 3 means x ≥ −2 and x < 3; both must hold.
    • Order of numbers. −4 < −1, so −4 is written first in an interval.

    3 Why

    The notations are conventions chosen to record the same membership decisions compactly. A square bracket includes its endpoint; a parenthesis excludes it. Ignoring that distinction changes whether an input is allowed. Infinity is a direction of unlimited continuation, not a real endpoint you can reach, so it always takes a parenthesis. Writing the smaller limit first matches the number line's order. A union combines membership in either set, including any overlap. Without it, writing only the outside limits could accidentally fill an excluded gap.

    4 The rule

    Use [ or ] for an included endpoint, ( or ) for an excluded endpoint or infinity.

    Write intervals from smaller to larger; union (∪) means or, including membership in both sets.

    The same idea, five ways

    Say it

    Say at least negative two and less than three.

    Write it

    The set includes −2, excludes 3, and contains every real number between them.

    In math
    • −2≤x<3
    • {x|−2≤x<3}
    • [−2,3)
    • Graph words: closed dot at −2, open dot at 3, shade between
    Like

    A road segment where one boundary post belongs to your route and the other does not.

    See it
    −23[−2, 3)
    The notation and the endpoint dots describe identical membership.

    The same idea, other ways

    As a fence with gates

    An interval gives the stretch between two fence posts. A square bracket keeps a post in your property; a parenthesis leaves the post outside. A missing stretch needs two intervals rather than one.

    As a membership question

    For [−2, 3), ask whether each candidate satisfies −2 ≤ x < 3. This includes −2 and excludes 3. Set-builder notation records exactly that question.

    As three translations

    x ≤ 7, {x | x ≤ 7}, and (−∞, 7] all include 7 and every smaller real number. The descriptions change, but the allowed members do not.

    Inequality notationSet-builder notationInterval notation
    x > 5{x | x > 5}(5, ∞)
    −2≤x<3{x|−2≤x<3}[−2,3)
    x ≤ 7{x | x ≤ 7}(−∞,7]
    1 ≤ x ≤ 3 or x > 5{x | 1 ≤ x ≤ 3 or x > 5}[1, 3] ∪ (5, ∞)

    Part 1: Inequality notation

    Inequality notation compares a candidate number with its limits. The word and means the candidate must pass both comparisons. The word or means one comparison or the other is enough. Do not turn two separate stretches into a single and statement.

    • A strict < or > comparison excludes its boundary.
    • A ≤ or ≥ comparison includes its boundary.
    • A compound inequality such as −2 ≤ x < 3 means both limits hold.
    5
    (5, ∞) on a number line, with a tick at 5.

    Reminder

    Reminder: Compound conditions, Order of numbers
    • Compound conditions. −2 ≤ x < 3 means x ≥ −2 and x < 3; both must hold.
    • Order of numbers. −4 < −1, so −4 is written first in an interval.

    The same idea, five ways

    Say it

    Say strictly greater than five.

    Write it

    The number must exceed 5, so equality is excluded.

    In math
    • x > 5
    • {x | x > 5}
    • (5, ∞)
    • Graph words: open dot at 5, shade right
    Like

    An entry sign admits only positions passing the stated height checks.

    See it
    5
    The same picture again: (5, ∞) on a number line, with a tick at 5.

    Worked example

    Notation ladder 1: one open ray

    OpenStax problem

    Write x > 5 in set-builder and interval notation.

    Show the steps and the answer
    5(5, ∞)
    (5, ∞) on a number line.
    1. We need a different description with exactly the same allowed members.State what is being found before choosing the calculation.
    2. Read > as strictly greater than, so 5 is excluded.The inequality has no equality part.
    3. Write {x | x > 5}.The braces name a set and the bar means such that.
    4. Write (5,∞).The set starts beyond 5 and has no upper endpoint; both symbols use parentheses.
    Answer
    • Set-builder: {x | x > 5}.
    • Interval: (5, ∞).
    Double-check 6 belongs to every description; 5 and 4 belong to none.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: x > 5 includes 5.
    Strictly greater excludes equality.
    ✓ Instead: Keep only inputs strictly above 5, described by (5, ∞).

    Tips and tricks

    • Read the comparison aloud before choosing an endpoint symbol.

    Part 2: Set-builder notation

    Set-builder notation is a sentence compressed into symbols. Braces, { and }, mean the set of. The vertical bar means such that. After the bar comes the condition an element must satisfy. Here x is understood to be a real number unless another kind of input is specified.

    • {x | x > 5} reads the set of x such that x is greater than 5.
    • A condition may use words as well as inequalities.
    • A listed set {2, 7} names its elements; a set-builder condition explains membership.

    {x | x ≤ 7}

    the set of real x

    such that x is at most 7

    Reminder

    Reminder: Compound conditions, Order of numbers
    • Compound conditions. −2 ≤ x < 3 means x ≥ −2 and x < 3; both must hold.
    • Order of numbers. −4 < −1, so −4 is written first in an interval.

    The same idea, five ways

    Say it

    Say the set of real x such that x is at most seven.

    Write it

    Braces name a set and the bar introduces its membership condition.

    In math
    • x ≤ 7
    • {x | x ≤ 7}
    • (−∞,7]
    • Graph words: closed dot at 7, shade left
    Like

    A guest-list rule states who qualifies without listing every possible guest.

    See it

    {x | x ≤ 7}

    the set of real x

    such that x is at most 7

    Worked example

    A closed ray extending to the left

    OpenStax problem

    Write x ≤ 7 in set-builder and interval notation.

    Show the steps and the answer
    7(−∞, 7]
    Interval: (−∞, 7]. The endpoint symbols record which limits belong.
    1. We need a different description with exactly the same allowed members.State what is being found before choosing the calculation.
    2. Include 7 and all smaller real values.The ≤ symbol includes equality.
    3. Write {x | x≤7}.Set-builder notation names the same membership condition.
    4. Write (−∞,7].The smaller end comes first, and the finite endpoint is included.
    Answer
    • Set-builder: {x | x ≤ 7}.
    • Interval: (−∞, 7].
    Double-check 7 and 6.9 belong, while 7.1 does not; there is no smallest real number in this set.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Read the bar in {x | x ≤ 7} as division.
    Inside set-builder notation this bar introduces the membership condition.
    ✓ Instead: Read the set of real x such that x is at most 7.

    Tips and tricks

    • Say the set of at the braces and such that at the bar.

    Part 3: Interval notation

    Interval notation names a continuous stretch of real numbers by its endpoints. It includes all numbers between those limits, not only integers. Use it for a stretch, but use a list for isolated values. An interval may run without an upper or lower bound.

    • Lower limit first, upper limit second: [−2, 3), not (3, −2].
    • Inclusive means included; exclusive means excluded.
    • A bracket is square, while a parenthesis is curved.
    • [c, c] is a one-element set; (c, c) has no elements because no number lies strictly between c and itself.
    −203
    [−2, 3) on a number line, with a tick at 0.

    Reminder

    Reminder: Compound conditions, Order of numbers
    • Compound conditions. −2 ≤ x < 3 means x ≥ −2 and x < 3; both must hold.
    • Order of numbers. −4 < −1, so −4 is written first in an interval.

    The same idea, five ways

    Say it

    Say at least negative two and less than three.

    Write it

    The interval contains every real number between −2 and 3, with only the left endpoint included.

    In math
    • −2≤x<3
    • {x|−2≤x<3}
    • [−2,3)
    • Graph words: closed at −2, open at 3, shade between
    Like

    Two mile markers describe an unbroken permitted stretch of road.

    See it
    −203
    The same picture again: [−2, 3) on a number line, with a tick at 0.

    Worked example

    Notation ladder 2: one endpoint in, one out

    OpenStax problem

    Write −2 ≤ x < 3 in words, set-builder notation and interval notation.

    Show the steps and the answer
    −23[−2, 3)
    The same picture again: [−2, 3) on a number line.
    1. We need a different description with exactly the same allowed members.State what is being found before choosing the calculation.
    2. Include −2 and exclude 3.The left comparison has equality, while the right comparison is strict.
    3. Say all real numbers at least −2 and less than 3.Both bounds must hold at the same time.
    4. Write {x | −2≤x<3} and [−2,3).The left bracket includes −2 and the right parenthesis excludes 3.
    Answer
    • Words: at least −2 and less than 3.
    • Set-builder: {x | −2 ≤ x < 3}.
    • Interval: [−2, 3).
    Double-check The values −2 and 2.5 belong; 3 does not. All three descriptions give these same decisions.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The finite set {−2, 3} equals [−2, 3].
    The interval contains every real number between those limits, while the set lists only two numbers.
    ✓ Instead: Use {−2, 3} for two isolated members, and [−2, 3] for the full stretch.

    Tips and tricks

    • Ask whether intervening fractions should belong.

    Part 4: Union of sets

    Union means gather everything belonging to one collection or the other, or both. Picture pouring two trays of labeled keys onto one table. Keep every different label once. The collections may be separated, overlap, or contain only a few isolated members.

    • The symbol ∪ joins sets without inventing members.
    • Shared members appear once.
    • An intersection keeps only members in both sets. It explains why an input must pass all arithmetic restrictions, while union combines allowed pieces.

    {2, 4, 6} ∪ {4, 7}

    = {2, 4, 6, 7}

    The shared member 4 is listed once

    Reminder

    Reminder: Compound conditions, Order of numbers
    • Compound conditions. −2 ≤ x < 3 means x ≥ −2 and x < 3; both must hold.
    • Order of numbers. −4 < −1, so −4 is written first in an interval.

    The same idea, five ways

    Say it

    Say in either set or in both.

    Write it

    Union collects all members from both sets, listing shared members once.

    In math
    • {2, 4, 6} ∪ {4, 7} = {2, 4, 6, 7}
    • {x | x = 2 or x = 4 or x = 6 or x = 7}
    Like

    Combine two guest lists and keep each different guest once.

    See it

    {2, 4, 6} ∪ {4, 7}

    = {2, 4, 6, 7}

    The shared member 4 is listed once

    Worked example

    Union can combine overlapping finite sets

    Find {2, 4, 6} ∪ {4, 7}.

    Show the steps and the answer

    {2, 4, 6, 7}.

    1. We are collecting all members that belong to either set, keeping repeated members once.Naming the requested values tells us which taught method to use.
    2. Collect members belonging to either set: 2, 4, 6, 4, 7.Union means the first set or the second set or both.
    3. List 4 once and write {2, 4, 6, 7}.A set records whether an element belongs, not how many times it appears.
    Answer
    {2, 4, 6, 7}.
    Double-check Each original set is contained in the answer. Listing {7, 2, 6, 4} would name the same set because a finite set has no required ordering.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: A shared member is listed twice in the union.
    A set records membership rather than repeated appearances.
    ✓ Instead: {2, 4, 6} ∪ {4, 7} = {2, 4, 6, 7}.

    Tips and tricks

    • Union keeps either collection's members and removes only repeated listings.

    5 How

    1. Identify the shaded or allowed portion of the number line.
    2. Use the closed dot / open dot convention: a filled dot is included and a hollow dot is excluded.
    3. State comparisons with <, >, ≤ or ≥ for inequality notation.
    4. Put the condition after the bar in {x | condition} for set-builder notation.
    5. Write the lower limit first and the upper limit second in interval notation.
    6. For separate pieces, join conditions with or and intervals with ∪. Keep every gap that is actually excluded.

    Translate an allowed set

    1
    Is a finite endpoint included?
    YesUse a square bracket.
    NoUse a parenthesis.
    ↓
    2
    Does the interval continue without a finite endpoint?
    YesUse −∞ or ∞ with a parenthesis.
    NoWrite the actual finite limit.
    ↓
    3
    Are there separate allowed pieces?
    YesJoin their intervals with ∪ and their conditions with or.
    NoWrite one interval without adding a gap.
    1. Identify the shaded or allowed portion of the number line.
    2. Read a filled dot as included and a hollow dot as excluded.
    3. State comparisons with <, >, ≤ or ≥ for inequality notation.
    4. Put the condition after the bar in {x | condition} for set-builder notation.
    5. Write the lower limit first and the upper limit second in interval notation.
    6. For separate pieces, join conditions with or and intervals with ∪. Keep every gap that is actually excluded.

    6 Worked example

    Worked example

    Textbook: read two shaded intervals

    OpenStax problem

    A number line shades 1 through 3 with filled endpoints, and everything to the right of 5 with a hollow endpoint at 5. Describe the set three ways.

    Show the steps and the answer
    135[1, 3] ∪ (5, ∞)
    The same picture again: [1, 3] and (5, ∞) on a number line.
    1. We are expressing the same allowed values in the requested notation.Naming the requested values tells us which taught method to use.
    2. For the first shaded piece, write 1≤x≤3.Both endpoints have filled dots, so both are included.
    3. For the second piece, write x > 5.The dot at 5 is hollow and the shading continues to the right without a last number.
    4. Join the conditions with or and the intervals with ∪.Membership in either piece is enough; the unshaded gap is not included.
    5. Read the braces and bar in {x | 1≤x≤3 or x > 5}.This says the set of real x such that one of the two stated conditions holds.
    Answer
    • Inequality: 1 ≤ x ≤ 3 or x > 5.
    • Set-builder: {x | 1 ≤ x ≤ 3 or x > 5}.
    • Interval: [1, 3] ∪ (5, ∞).
    Double-check 2 is included by the first piece and 6 by the second. Neither 4 nor 5 is included, so the gap remains.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 5

    Notation ladder 1: one open ray

    OpenStax problem

    Write x > 5 in set-builder and interval notation.

    Show the steps and the answer
    5(5, ∞)
    The same picture again: (5, ∞) on a number line.
    1. We need a different description with exactly the same allowed members.State what is being found before choosing the calculation.
    2. Read > as strictly greater than, so 5 is excluded.The inequality has no equality part.
    3. Write {x | x > 5}.The braces name a set and the bar means such that.
    4. Write (5,∞).The set starts beyond 5 and has no upper endpoint; both symbols use parentheses.
    Answer
    • Set-builder: {x | x > 5}.
    • Interval: (5, ∞).
    Double-check 6 belongs to every description; 5 and 4 belong to none.

    Rung 2 of 5

    Notation ladder 2: one endpoint in, one out

    OpenStax problem

    Write −2 ≤ x < 3 in words, set-builder notation and interval notation.

    Show the steps and the answer
    −23[−2, 3)
    The same picture a third time: [−2, 3) on a number line.
    1. We need a different description with exactly the same allowed members.State what is being found before choosing the calculation.
    2. Include −2 and exclude 3.The left comparison has equality, while the right comparison is strict.
    3. Say all real numbers at least −2 and less than 3.Both bounds must hold at the same time.
    4. Write {x | −2≤x<3} and [−2,3).The left bracket includes −2 and the right parenthesis excludes 3.
    Answer
    • Words: at least −2 and less than 3.
    • Set-builder: {x | −2 ≤ x < 3}.
    • Interval: [−2, 3).
    Double-check The values −2 and 2.5 belong; 3 does not. All three descriptions give these same decisions.

    Rung 3 of 5

    Textbook: read two shaded intervals

    OpenStax problem

    A number line shades 1 through 3 with filled endpoints, and everything to the right of 5 with a hollow endpoint at 5. Describe the set three ways.

    Show the steps and the answer
    135[1, 3] ∪ (5, ∞)
    The same picture a third time: [1, 3] and (5, ∞) on a number line.
    1. We are expressing the same allowed values in the requested notation.Naming the requested values tells us which taught method to use.
    2. For the first shaded piece, write 1≤x≤3.Both endpoints have filled dots, so both are included.
    3. For the second piece, write x > 5.The dot at 5 is hollow and the shading continues to the right without a last number.
    4. Join the conditions with or and the intervals with ∪.Membership in either piece is enough; the unshaded gap is not included.
    5. Read the braces and bar in {x | 1≤x≤3 or x > 5}.This says the set of real x such that one of the two stated conditions holds.
    Answer
    • Inequality: 1 ≤ x ≤ 3 or x > 5.
    • Set-builder: {x | 1 ≤ x ≤ 3 or x > 5}.
    • Interval: [1, 3] ∪ (5, ∞).
    Double-check 2 is included by the first piece and 6 by the second. Neither 4 nor 5 is included, so the gap remains.

    Rung 4 of 5

    Notation ladder 4: every real number except one

    OpenStax problem

    Write x ≠ 2 using inequalities, set-builder notation and intervals.

    Show the steps and the answer
    2(−∞, 2) ∪ (2, ∞)
    Interval: (−∞, 2) ∪ (2, ∞). The endpoint symbols record which limits belong.
    1. We need a different description with exactly the same allowed members.State what is being found before choosing the calculation.
    2. Split the allowed inputs into x < 2 or x > 2.Every real number except 2 lies on one side of 2.
    3. Write {x | x≠2}.The condition says to omit that single member.
    4. Write (−∞,2)∪(2,∞).Neither interval includes 2, and their union contains everything else.
    Answer
    • Inequality: x < 2 or x > 2.
    • Set-builder: {x | x ≠ 2}.
    • Interval: (−∞, 2) ∪ (2, ∞).
    Double-check An input such as 1.9 remains allowed, as does 2.1. The omission is one number, not a whole neighborhood.

    Rung 5 of 5

    Notation ladder 5: overlap and a single-value set

    Simplify [0, 4] ∪ [2, 6]. Also write {8} in interval notation.

    Show the steps and the answer
    06[0, 6]
    The overlapping intervals cover every position from 0 through 6.
    8[8, 8]
    Both limits are 8 and included, so this is the one-member set {8}.
    1. We need a different description with exactly the same allowed members.State what is being found before choosing the calculation.
    2. The first interval includes every real number from 0 through 4, and the second from 2 through 6.Both use brackets, so all listed endpoints belong.
    3. The pieces overlap from 2 through 4, leaving no gap between 0 and 6.Union includes elements in either piece and does not duplicate shared elements.
    4. Write the union as [0, 6].Its smallest member is 0 and largest is 6, and every number between is included.
    5. Write {8} as [8, 8].The only number between equal included endpoints is that endpoint itself.
    Answer
    • Union: [0, 6].
    • Single-value interval: [8, 8].
    Double-check 5 comes from the second interval and 1 from the first. In [8, 8], 8 satisfies both limits, while 7.9 and 8.1 do not.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Infinity belongs, so write [5, ∞].
    Infinity is not a real number or a reachable endpoint. The left endpoint also depends on whether equality is allowed.
    ✓ Instead: For x ≥ 5 write [5, ∞); for x > 5 write (5, ∞).
    ✗ Not this: Union applies only when sets are separate.
    Union keeps all members in either set, whether the sets overlap or not.
    ✓ Instead: [0, 4] ∪ [2, 6] = [0, 6].

    Tips and tricks

    • Translate one endpoint at a time: equality means included, and strict means excluded.
    • Write or next to ∪ as a memory cue.
    • Test one boundary and one gap value to check that a notation translation has kept the same set.

    7 The trap

    Writing [1, ∞) for [1, 3] ∪ (5, ∞). That would fill the missing region after 3 through 5. The union symbol joins sets without filling gaps.

    Comes back in

    Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.