Graphing a rational function from its features
Leans on
Quick review (2 minutes)
Think of drawing a road on a map before you have driven it.
For a top that is not the constant 0, split the x-axis at every x-intercept, every vertical asymptote and every hole. On each interval between neighboring split points, f(x) keeps one sign, so one test point tells whether the graph is above or below the x-axis there. The sketch is: dashed asymptotes, plotted intercepts, an open circle at each hole, one test point per interval, then smooth branches that never cross a vertical asymptote and, at the far left and far right, level toward the horizontal asymptote or slant asymptote. When the top's degree is two or more above the bottom's, there is neither, and the far ends follow the polynomial quotient that division gives.
Factor the top and the bottom completely. Set the original bottom equal to 0 to find the inputs to throw out, and write the domain.
Cancel any factor the top and bottom share. Each canceled factor (x − a) with no copy of it left in the bottom marks a hole at x = a: plug a into the simplified formula to get the hole's height, and plan an open circle there.
Set the simplified bottom equal to 0. Each solution is a vertical asymptote. Draw a dashed vertical line at each one.
Compare the degrees of top and bottom to get the horizontal asymptote, or divide when the top's degree is one more to get the slant asymptote. Draw it dashed.
Find the intercepts: f(0) for the y-intercept when 0 is in the domain, and for the x-intercepts the zeros of the simplified top where the original bottom is not 0. Plot them.
Mark every x-intercept, vertical asymptote and hole on the x-axis; with a top that is not the constant 0 there are finitely many. These split points cut the axis into intervals.
Pick one test point inside each interval, plug it in, and plot the point. A positive output means that stretch is above the x-axis. A negative output means it is below.
Draw each branch last: through its plotted points, climbing or diving beside each vertical asymptote on the side its test point says, and, at the far left and far right, leveling toward the horizontal or slant asymptote, or following the quotient from division when there is neither. Put the open circle at each hole.
Check with one input very close to each vertical asymptote and one input far out, such as x = 100.
Factor: factor top and bottom, and write the domain from the original bottom.
Holes: cancel shared factors. Each canceled factor (x − a) with no copy of it left in the bottom gives an open circle at x = a, with its height from the simplified formula.
Vertical asymptotes: the zeros of the simplified bottom. Draw them dashed.
Horizontal or slant asymptote: compare degrees, or divide when the top's degree is one more. Draw it dashed.
Intercepts: f(0) for the y-intercept when 0 is in the domain; for the x-intercepts, zeros of the simplified top where the original bottom is not 0.
Test points: one input inside each interval between split points. Plot each one.
Sketch: one smooth branch at a time, obeying every dashed line, then check with numbers.
Sketch the graph of f(x) = . In plain words: find every feature of the graph from the formula, then draw the one curve that fits all of them.
Domain: all real numbers except −2 and 2.
Hole (removable discontinuity): open circle at (2, ).
Vertical asymptote: x = −2.
Horizontal asymptote: y = 1.
Intercepts: (−1, 0) and (0, ).
Left branch: above y = 1, through (−3, 2), climbing as x approaches −2 from the left.
Right branch: rising from far below beside x = −2, through (−1.5, −1), (−1, 0), (0, ), the open circle at (2, ) and (3, ), leveling toward y = 1 from below.
The most common mistake is to plot a handful of points and join them all in one stroke, straight through a vertical asymptote. The function has no output at a vertical asymptote, so no part of the curve may pass through that dashed line. Draw every asymptote first, lift the pencil at each vertical one, and let the test point on each side decide whether that side climbs or dives.
rational function
A function written as a fraction: one polynomial on top, another polynomial on the bottom. It is defined everywhere except where the bottom equals zero.
vertical asymptote
A vertical line x = a that the graph shoots up or down beside and never touches. It sits at an input where the bottom is zero after canceling. Say it AS-im-toht.
horizontal asymptote
A horizontal line y = b that the graph settles toward as x goes far right or far left. It describes the far ends only. The graph may cross it in the middle.
slant asymptote
A tilted line y = mx + b that the graph follows far out. It appears when the top's degree is exactly one more than the bottom's. Dividing gives its equation.
removable discontinuity
A single missing point in a graph, also called a hole. It appears when a factor (x − a) cancels from top and bottom with no copy of it left in the bottom: the curve looks unbroken, but that one input has no output.
arrow notation
Shorthand for a trend. x → 2 means x moves toward 2. A raised plus or minus means from the right or the left. f(x) → ∞ means outputs grow without end.
1 In plain words
Think of drawing a road on a map before you have driven it. First you mark what you already know. Dashed fences the road can never cross, or must run beside: those are the asymptotes. Pins the road must pass through: those are the intercepts. One missing paving stone: that is a hole. Then, in each stretch between fences and pins, you send one scout to report whether the road is north or south of the main street, which is the x-axis. That scout is a test point. With fences, pins, the missing stone and one scout per stretch on the map, you can sketch the road's shape, adding a point or two wherever you need to see a turn, and you draw it last.
2 Picture it
Reminder
Reminder: Factoring a difference of squares, Factoring a trinomial, Hole or vertical asymptote, Horizontal or slant asymptote from the degrees, Intercepts, Signs in a fraction, Arrow notation, Interval notation
- Factoring a difference of squares. − = (a − b)(a + b), so − 4 = (x − 2)(x + 2). Multiply back to check: + 2x − 2x − 4 = − 4.
- Factoring a trinomial. For − x − 2, find two numbers that multiply to −2 and add to −1. They are −2 and 1, so − x − 2 = (x − 2)(x + 1).
- Hole or vertical asymptote. A factor that cancels with no copy of it left in the bottom gives a hole, also called a removable discontinuity. A zero of the bottom that is left after canceling gives a vertical asymptote. In , x = 2 is a hole and x = −2 is a vertical asymptote.
- Horizontal or slant asymptote from the degrees. Top degree less: y = 0. Degrees equal: y = ratio of leading coefficients, so has y = 2. Top degree one more: divide, and the quotient is the slant asymptote.
- Intercepts. The y-intercept is f(0), when 0 is in the domain. The x-intercepts are the zeros of the top after canceling where the original bottom is not 0. For : f(0) = −4 and 2x − 4 = 0 at x = 2.
- Signs in a fraction. Same signs give a positive, different signs give a negative: = 2 and = −1.
- Arrow notation. The arrow notation 'as x → 3 from the left, f(x) → −∞' means: as the inputs close in on 3 from smaller numbers, the outputs fall without bound. For , f(2.9) = −20.
- Interval notation. (−2, −1) means every number between −2 and −1, with both ends left out. −1.5 is in it. −2 is not.
3 Why
A fraction is positive when its top and bottom have the same sign and negative when their signs differ. The top and the bottom are polynomials, and a polynomial can change sign only by passing through zero. So the whole function can change sign only where the top is zero or where the bottom is zero. Each such place is an x-intercept, a vertical asymptote or a hole. Between two neighboring places like that, the graph is stuck on one side of the x-axis, so one test point speaks for the whole interval. The asymptotes then say what the curve does at the edges, which leaves very little freedom.
4 The rule
For a top that is not the constant 0, split the x-axis at every x-intercept, every vertical asymptote and every hole.
On each interval between neighboring split points, f(x) keeps one sign, so one test point tells whether the graph is above or below the x-axis there. The sketch is: dashed asymptotes, plotted intercepts, an open circle at each hole, one test point per interval, then smooth branches that never cross a vertical asymptote and, at the far left and far right, level toward the horizontal asymptote or slant asymptote. When the top's degree is two or more above the bottom's, there is neither, and the far ends follow the polynomial quotient that division gives.
The same idea, five ways
f is negative between negative two and negative one, so the graph is below the x-axis there.
On the interval from −2 to −1, every output of f is negative, so that whole stretch of the graph lies below the x-axis.
- f(x) < 0 on (−2, −1)
- test point: f(−1.5) = −1, and −1 < 0
- sign of f on (−2, −1): −
One scout per stretch of road. His report covers the whole stretch, because the road cannot switch sides without a crossing or a fence.
The same idea, other ways
Look at the finished sketch of f(x) = . Two dashed lines form a cross: the vertical asymptote x = 2 and the horizontal asymptote y = 1. The dot at (0, 0) is the only intercept. The other dots are test points. Each branch sits in one corner of the cross, passes through its dots, and bends along both dashed lines.
A dot-to-dot puzzle hands you numbered dots. Here you make the dots yourself: the intercepts and the test points. The asymptotes are the rules printed on the page. Never draw across a dashed vertical line. Finish each end of the drawing along the dashed level line or the dashed slanted line. When there is neither, follow the curve that the quotient from division draws. A hole is one dot you draw hollow, because the curve passes that spot without owning it.
Take f(x) = . The top is zero at x = 0 and the bottom is zero at x = 2, so the split points are 0 and 2. Test one input in each interval. f(−1) = = , which is positive. f(1) = = −1, which is negative. f(3) = = 3, which is positive. So the graph is above the x-axis, then below it, then above it again.
The sign of a fraction depends only on the signs of its top and its bottom. Neither one can change sign without passing through zero. A zero of the top is an x-intercept, unless it also makes the bottom 0. A zero of the bottom is a vertical asymptote or a hole. Those are exactly the split points. So inside an interval, with no split point in it, nothing is able to flip the sign.
Friendly Hikers Visit Hills In The Summer: Factor, Holes, Vertical asymptotes, Horizontal or slant asymptote, Intercepts, Test points, Sketch. The pencil draws the curve only at the last word. Everything before it is dashed lines and dots.
| Feature | Where it comes from | How to draw it |
|---|---|---|
| Hole (removable discontinuity) | A zero of the bottom that is no longer a zero of the bottom after canceling | Open circle at the height the simplified formula gives |
| Vertical asymptote | A zero of the bottom after canceling | Dashed vertical line. The curve never crosses it |
| Horizontal asymptote | Comparing the degrees of top and bottom | Dashed level line. The curve levels toward it at the far left and far right |
| Slant asymptote | The quotient, when the top's degree is one more than the bottom's | Dashed slanted line. The curve follows it at the far ends |
| x-intercept | A zero of the simplified top where the original bottom is not 0 | Dot on the x-axis |
| y-intercept | f(0), when 0 is in the domain | Dot on the y-axis |
| Test point | One input chosen inside each interval between neighboring split points | Dot. It shows whether that stretch is above or below the x-axis |
5 How
- Factor the top and the bottom completely. Set the original bottom equal to 0 to find the inputs to throw out, and write the domain.
- Cancel any factor the top and bottom share. Each canceled factor (x − a) with no copy of it left in the bottom marks a hole at x = a: plug a into the simplified formula to get the hole's height, and plan an open circle there.
- Set the simplified bottom equal to 0. Each solution is a vertical asymptote. Draw a dashed vertical line at each one.
- Compare the degrees of top and bottom to get the horizontal asymptote, or divide when the top's degree is one more to get the slant asymptote. Draw it dashed.
- Find the intercepts: f(0) for the y-intercept when 0 is in the domain, and for the x-intercepts the zeros of the simplified top where the original bottom is not 0. Plot them.
- Mark every x-intercept, vertical asymptote and hole on the x-axis; with a top that is not the constant 0 there are finitely many. These split points cut the axis into intervals.
- Pick one test point inside each interval, plug it in, and plot the point. A positive output means that stretch is above the x-axis. A negative output means it is below.
- Draw each branch last: through its plotted points, climbing or diving beside each vertical asymptote on the side its test point says, and, at the far left and far right, leveling toward the horizontal or slant asymptote, or following the quotient from division when there is neither. Put the open circle at each hole.
- Check with one input very close to each vertical asymptote and one input far out, such as x = 100.
Sketching a rational function: Friendly Hikers Visit Hills In The Summer
- Factor: factor top and bottom, and write the domain from the original bottom.
- Holes: cancel shared factors. Each canceled factor (x − a) with no copy of it left in the bottom gives an open circle at x = a, with its height from the simplified formula.
- Vertical asymptotes: the zeros of the simplified bottom. Draw them dashed.
- Horizontal or slant asymptote: compare degrees, or divide when the top's degree is one more. Draw it dashed.
- Intercepts: f(0) for the y-intercept when 0 is in the domain; for the x-intercepts, zeros of the simplified top where the original bottom is not 0.
- Test points: one input inside each interval between split points. Plot each one.
- Sketch: one smooth branch at a time, obeying every dashed line, then check with numbers.
6 Worked example
Worked example
A sketch with a hole, a wall and a level line
Sketch the graph of f(x) = . In plain words: find every feature of the graph from the formula, then draw the one curve that fits all of them.
Show the steps and the answer
- Factor the top and the bottom: .Factors show where the top and bottom are zero. For the top, −2 and 1 multiply to −2 and add to −1. The bottom is a difference of squares.
- Set the original bottom equal to 0: gives and . The domain is all real numbers except and 2.This finds the two inputs that would make the bottom zero, so we can throw them out. Plug back: − 4 = 0 and (−2 − 4 = 0.
- Cancel the shared factor (). The simplified formula is , with . The hole is at , at height . Plan an open circle at .This factor cancels with no copy of it left in the bottom, so it gives a hole, also called a removable discontinuity, not a wall. The simplified formula tells the height the curve is heading for.
- Set the simplified bottom equal to 0: gives . Draw a dashed vertical line at .A zero of the bottom that survives canceling is a vertical asymptote. Plug back: −2 + 2 = 0, and the top there is −1, not zero.
- Compare degrees: top degree 2, bottom degree 2. The leading coefficients are 1 and 1, so the horizontal asymptote is . Draw a dashed level line at .When the degrees are equal, the far-out height is the ratio of the leading coefficients.
- Find the intercepts. Simplified top: gives , so the x-intercept is . At : , so the y-intercept is .The graph meets the x-axis where the simplified top is zero and the original bottom is not, and it meets the y-axis at the input 0. A negative divided by a negative is positive.
- Mark the split points and 2 on the x-axis. They make four intervals: and .The sign of f can change only at an x-intercept, a vertical asymptote or a hole. Look at the open dots on the sign chart.
- Test one input in each interval with the simplified formula. . . . . Plot and .One output per interval tells the side of the x-axis for the whole interval: above, below, above, above. The y-intercept already serves as the test point for (−1, 2).
- Draw the left branch. It passes through , climbs without bound as x approaches from the left, and levels toward at the far left.The test point says this stretch is above the x-axis, so beside the wall the curve must go up. Far out it must follow the horizontal asymptote.
- Draw the right branch. It starts far below, immediately right of , rises through and , has an open circle at , passes , and levels toward .The test point −1.5 says the curve is below the x-axis next to the wall, so it comes up from below. The open circle shows that x = 2 is not in the domain.
- Domain: all real numbers except −2 and 2.
- Hole (removable discontinuity): open circle at (2, ).
- Vertical asymptote: x = −2.
- Horizontal asymptote: y = 1.
- Intercepts: (−1, 0) and (0, ).
- Left branch: above y = 1, through (−3, 2), climbing as x approaches −2 from the left.
- Right branch: rising from far below beside x = −2, through (−1.5, −1), (−1, 0), (0, ), the open circle at (2, ) and (3, ), leveling toward y = 1 from below.
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 5
One wall, no x-intercept
Sketch the graph of f(x) = . In plain words: find the features from the formula, then draw the curve that fits them.
Show the steps and the answer
- Factor: nothing factors. Set the bottom equal to 0: gives . The domain is all real numbers except 3.This finds the one input that would make the bottom zero, so we can throw it out. Plug back: 3 − 3 = 0.
- Look for a shared factor. There is none, so there is no hole.A hole needs a factor that cancels from top and bottom.
- The bottom is zero at and nothing canceled, so is a vertical asymptote. Draw it dashed.A zero of the bottom after canceling is a vertical asymptote.
- Compare degrees: the top is the constant 2 (degree 0) and the bottom has degree 1. The horizontal asymptote is .When the top's degree is less than the bottom's, the outputs shrink toward 0 far out.
- Intercepts: the top is 2 and is never zero, so there is no x-intercept. , so the y-intercept is .A fraction is zero only when its top is zero. The y-intercept is the output at the input 0.
- The only split point is 3, so the intervals are and . Test: and . One more point for shape: .One test point per interval tells the side of the x-axis: below on the left, above on the right.
- Draw the left branch below the x-axis through and , diving as x approaches 3 from the left and hugging at the far left. Draw the right branch above the x-axis through (4, 2) and (5, 1), climbing beside and leveling toward .Each branch must fit its points and obey both dashed lines.
- Domain: all real numbers except 3.
- No hole and no x-intercept.
- Vertical asymptote: x = 3.
- Horizontal asymptote: y = 0.
- y-intercept: (0, −).
- Left branch below the x-axis, diving beside x = 3.
- Right branch above the x-axis, climbing beside x = 3.
Rung 2 of 5
One of each feature, no hole
Sketch the graph of f(x) = . In plain words: find the features from the formula, then draw the curve that fits them.
Show the steps and the answer
- Factor: the top is and the bottom is . Set the bottom equal to 0: . The domain is all real numbers except .This finds the input that would make the bottom zero, so we can throw it out. Plug back: −1 + 1 = 0.
- No factor is shared, so there is no hole. The vertical asymptote is . Draw it dashed.Nothing cancels, so the zero of the bottom stays a wall.
- Compare degrees: 1 and 1. The leading coefficients are 2 and 1, so the horizontal asymptote is . Draw it dashed.Equal degrees give the ratio of the leading coefficients.
- Intercepts: gives , so the x-intercept is (2, 0). , so the y-intercept is .Plug back for the x-intercept: f(2) = = 0.
- Split points: and 2. Intervals: . Test: . . . One more point for shape: .The signs are positive, negative, positive. Look at the sign chart: one sign sits over each interval.
- Left branch: through and , climbing as x approaches from the left, leveling toward at the far left. Right branch: rising from far below beside , through , (2, 0) and , leveling toward .Left of the wall the test point is positive, so the curve goes up there. Right of the wall the test point is negative, so the curve comes from below.
- Domain: all real numbers except −1.
- No hole.
- Vertical asymptote: x = −1.
- Horizontal asymptote: y = 2.
- Intercepts: (2, 0) and (0, −4).
- Left branch above y = 2, climbing beside x = −1.
- Right branch rising from far below, through (0, −4) and (2, 0), leveling toward y = 2 from below.
Rung 3 of 5
Both sides of the wall go the same way
Sketch the graph of f(x) = . In plain words: find the features from the formula, then draw the curve that fits them.
Show the steps and the answer
- Factor. Top: and multiply to 3 and add to , so the top is . Bottom: and multiply to 4 and add to , so the bottom is . Set the bottom equal to 0: . The domain is all real numbers except 2.This finds the one input that would make the bottom zero, so we can throw it out. Plug back: 4 − 8 + 4 = 0.
- No factor is shared, so there is no hole. The vertical asymptote is .The top's factors are (x − 1) and (x − 3). Neither one matches (x − 2).
- Compare degrees: 2 and 2, with leading coefficients 1 and 1. The horizontal asymptote is .Equal degrees give the ratio of the leading coefficients.
- Intercepts: gives and , so the x-intercepts are (1, 0) and (3, 0). , so the y-intercept is .Zeros of the simplified top where the original bottom is not 0 are x-intercepts. At x = 0 only the constants remain.
- Split points: 1, 2 and 3. Intervals: , (1, 2), (2, 3), . Test with the factored form: . . . .The signs are +, −, −, +. The sign does not change across x = 2, because the squared bottom is positive on both sides.
- Left branch: leveling near at the far left, through and (1, 0), then diving through as x approaches 2 from the left. Right branch: coming up from far below beside , through , (3, 0) and , leveling toward .Both test points next to the wall are negative, so both branches dive beside it.
- Domain: all real numbers except 2.
- No hole.
- Vertical asymptote: x = 2, with the graph diving on both sides.
- Horizontal asymptote: y = 1.
- Intercepts: (1, 0), (3, 0) and (0, ).
- Both branches stay below y = 1 and mirror each other across x = 2.
Rung 4 of 5
Two walls, and a curve that crosses its level line
Sketch the graph of f(x) = . In plain words: find the features from the formula, then draw the curve that fits them.
Show the steps and the answer
- Factor: the top is 2x and the bottom is . Set the bottom equal to 0: and . The domain is all real numbers except and 2.This finds the two inputs that would make the bottom zero, so we can throw them out. Plug back: − 4 = 0 and (−2 − 4 = 0.
- No factor is shared, so there is no hole. The vertical asymptotes are and . Draw both dashed.Both zeros of the bottom survive, so there are two walls and three branches.
- Compare degrees: top degree 1, bottom degree 2. The horizontal asymptote is .When the top's degree is less, the outputs shrink toward 0 far out.
- Intercepts: gives , so the x-intercept is (0, 0). , so the y-intercept is the same point.The origin is on both axes, so one point serves as both intercepts.
- Split points: , 0 and 2. Intervals: , (0, 2), . Test: . . . . Two more points for shape: and .The signs are −, +, −, +. Look at the sign chart: the sign flips at every split point here.
- Left branch: below the x-axis, hugging at the far left, through and , diving as x approaches from the left. Middle branch: falling from far above beside , through , (0, 0) and , diving as x approaches 2 from the left. Right branch: falling from far above beside , through and , leveling toward .Each branch goes up or down beside a wall according to the test point on that side.
- Domain: all real numbers except −2 and 2.
- No hole.
- Vertical asymptotes: x = −2 and x = 2.
- Horizontal asymptote: y = 0.
- Intercept: (0, 0) only.
- Three branches: below the x-axis left of −2, a falling middle branch through the origin, and above the x-axis right of 2.
- The middle branch crosses the horizontal asymptote y = 0 at the origin.
Rung 5 of 5
A slant asymptote
Sketch the graph of f(x) = . In plain words: find the features from the formula, then draw the curve that fits them.
Show the steps and the answer
- Factor: the top is and the bottom is . Set the bottom equal to 0: . The domain is all real numbers except 1.This finds the one input that would make the bottom zero, so we can throw it out. Plug back: 1 − 1 = 0.
- No factor is shared, so there is no hole. The vertical asymptote is .Nothing cancels, so the zero of the bottom stays a wall.
- Compare degrees: top degree 2, bottom degree 1. The top's degree is one more, so divide. , so the quotient is and the remainder is . The slant asymptote is . Draw it dashed.Check the division by multiplying back: (x − 1)(x + 1) − 3 = − 1 − 3 = − 4. Far out, the leftover piece shrinks toward 0, so the curve follows the quotient line.
- Intercepts: gives and , so the x-intercepts are (2, 0) and . , so the y-intercept is (0, 4).Zeros of the simplified top where the original bottom is not 0 are x-intercepts. A negative divided by a negative is positive.
- Split points: , 1 and 2. Intervals: , (1, 2), . Test: . . . .The signs are −, +, −, +. Look at the sign chart.
- Left branch: following the line at the far left, rising through and (0, 4), climbing as x approaches 1 from the left. Right branch: rising from far below beside , through , (2, 0) and , then following the line .The test point 0 is positive, so the curve climbs on the left side of the wall. The test point 1.5 is negative, so the curve comes from below on the right side.
- Domain: all real numbers except 1.
- No hole.
- Vertical asymptote: x = 1.
- Slant asymptote: y = x + 1.
- Intercepts: (−2, 0), (2, 0) and (0, 4).
- Left branch: rising, a little above the slant line far out, climbing beside x = 1.
- Right branch: rising from far below, a little below the slant line far out.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device for the order: Friendly Hikers Visit Hills In The Summer. Factor, Holes, Vertical asymptotes, Horizontal or slant asymptote, Intercepts, Test points, Sketch.
- Draw asymptotes dashed. They are guides for the curve, not part of the graph.
- Choose test points that keep the arithmetic light: a whole number when the interval holds one, and 0 whenever 0 is inside an interval. The y-intercept already counts as the test point for its interval.
- Plug test points into the simplified formula. It gives the same output as the original at every input except the hole, with less arithmetic.
- Count the intervals: the number of intervals is the number of split points plus 1. Three split points mean four intervals and four test points.
- To see whether the curve levels toward the horizontal asymptote from above or from below, look at the sign of f(x) minus the asymptote's height far out: the division's remainder over the bottom gives it. A far input such as x = 100 or x = −100 is a quick check of that sign.
- If a branch still looks uncertain, plot one more point in that interval. An extra point never hurts a sketch.
7 The trap
The most common mistake is to plot a handful of points and join them all in one stroke, straight through a vertical asymptote. The function has no output at a vertical asymptote, so no part of the curve may pass through that dashed line. Draw every asymptote first, lift the pencil at each vertical one, and let the test point on each side decide whether that side climbs or dives.
Flash cards
Say the answer out loud, then flip.
On the map picture, what job does a test point do?
Which three kinds of places split the x-axis into intervals?
- Every x-intercept.
- Every vertical asymptote.
- Every hole.