Quarry School

Turn an equation into a function when possible

Subject: MathematicsLeans on: Balance operationsLeans on: Reducing fractionsLeans on: Solving a squared equationLeans on: Interval notation
Level 2 · BuildingAbout 24 min read8 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Picture a bill with two amounts mixed together.

    Rule

    Choose the input and output. An explicit rule gives the output alone in terms of the input.
    An implicit rule keeps them mixed in an equation. Function status requires exactly one output for each allowed input.

    Step

    1. Name the input letter and the requested output letter.

    2. Undo addition or subtraction around the output, doing the same operation to both sides.

    3. Divide every remaining term by the output's nonzero coefficient.

    4. For a cubed output, take its unique real cube root. For a squared output, keep both signs and test an input where they differ.

    5. Write the output alone as f(input) when possible, and check a pair in the equation you started with.

    6. If the equation stays mixed, remember that an awkward formula alone does not disprove a function.

    Question

    Write x − 64y3 = 0 as y = f(x). Then find y when x = −8.

    Answer

    y = f(x) = x34
    At x = −8, y = −12.

    Trap

    Discarding the negative square-root solution when the original equation permits it. A root expression chooses one branch; a squared equation may include both.

    Strategy

    1. Name the input letter and the requested output letter.

    2. Undo addition or subtraction around the output, doing the same operation to both sides.

    3. Divide every remaining term by the output's nonzero coefficient.

    4. For a cubed output, take its unique real cube root. For a squared output, keep both signs and test an input where they differ.

    5. Write the output alone as f(input) when possible, and check a pair in the equation you started with.

    6. If the equation stays mixed, remember that an awkward formula alone does not disprove a function.

    Term

    Relation

    Definition

    A set of ordered pairs that connects inputs with outputs. It can have conflicting outputs and need not be a function.

    Term

    Variable

    Definition

    A letter that represents a number or another chosen value.

    Term

    Function

    Definition

    A relation assigning exactly one output to every input in its domain.

    Term

    Input

    Definition

    A value chosen for a function. The definition decides which values are allowed.

    Term

    Output

    Definition

    The result a function assigns to a particular input.

    Term

    Domain

    Definition

    The set of all inputs accepted by the defined relation or function.

    Term

    Equation

    Definition

    A statement that two expressions are equal, shown with an equals sign.

    Term

    Formula

    Definition

    A mathematical instruction connecting quantities, often written as an equation.

    Term

    Solve

    Definition

    Find every allowed input that satisfies a stated equation or produces a specified output.

    Term

    Algebraic form

    Definition

    A formula giving the output directly in terms of the input. Here it is also called an explicit rule or explicit formula.

    Term

    Implicit rule

    Definition

    An equation relating input and output without isolating the output. It defines a function only if each accepted input determines one output.

    Term

    Graph

    Definition

    A picture of ordered pairs at their coordinate locations. A graph of a function contains every pair (x, f(x)) for its allowed inputs.

    Term

    Reciprocal

    Definition

    One divided by a nonzero number. A number times its reciprocal equals 1.

    Term

    Square root

    Definition

    The nonnegative number whose square equals the given nonnegative input.

    Term

    Principal square root

    Definition

    The nonnegative root chosen by the symbol √. Solving a squared equation can require both signs.

    Term

    Cube root

    Definition

    The unique real number whose cube equals the input.

    Term

    Factor

    Definition

    A quantity multiplied by another quantity in a product.

    Term

    Numerator

    Definition

    The top of a fraction, showing the quantity being divided.

    Term

    Denominator

    Definition

    The bottom of a fraction, showing the divisor or number of equal pieces in one whole. It cannot be zero.

    Term

    Power

    Definition

    A quantity written with a base and exponent. Positive whole-number exponents count multiplied copies; zero and negative exponents extend that pattern.

    Term

    Interval notation

    Definition

    A way to write stretches of the number line. Brackets include finite endpoints; parentheses exclude them or accompany infinity.

    Term

    Even

    Definition

    An integer divisible by 2 into an integer result.

    Term

    Coefficient

    Definition

    A number multiplying a variable term.

    Term

    Parabola

    Definition

    The graph shape of a quadratic function, appearing as a rounded U or an upside-down U when y depends quadratically on x.

    Term

    Nonnegative

    Definition

    Zero or positive; written x ≥ 0.

    Term

    Circle

    Definition

    The set of points at one fixed positive distance from a center.

    Term

    Exponent

    Definition

    The raised number telling how many copies of a base are multiplied for a positive integer power.

    Term

    ±

    Definition

    A symbol packing both a positive and a negative choice into one line. The choices differ unless the quantity is zero.

    Term

    Difference

    Definition

    The result of a subtraction. For a change, subtract the old value from the new value.

    Term

    Polynomial

    Definition

    A sum of constant multiples of whole-number powers of a variable. Its variable is not inside a root or denominator.

    Term

    Term

    Definition

    One added or subtracted piece of an expression. Keep its sign with that piece.

    1 In plain words

    Picture a bill with two amounts mixed together. You know one amount and want the other. In 2n + 6p = 12, n is the input you choose, and p is the output you want. Writing p = f(n) means get p alone on the left, with only n on the right. First remove 2n from the total, then divide the remainder into six equal groups. A formula that gives the output directly is an explicit rule. A mixed equation is an implicit rule. Either one represents a function only when each allowed input has exactly one output.

    2 Picture it

    Isolate p: p = 2 − n3

    At x = 0: y = 1 or y = −1

    A cube root gives one real output

    One output for each allowed input

    Reminder

    Reminder: Balance operations, Reducing fractions, Solving a squared equation, Interval notation
    • Balance operations. Subtracting 2n from both sides of 2n + 6p = 12 gives 6p = 12 − 2n.
    • Reducing fractions. 2n6 = n3 because the common nonzero factor 2 cancels.
    • Solving a squared equation. y2 = 1 gives y = 1 and y = −1, while 1 alone means 1.
    • Interval notation. [−1, 1] includes both endpoints; here −1 and 1 are allowed circle inputs.

    3 Why

    Doing the same operation to both sides keeps the equality true. After n is chosen, 2n is a known amount. Subtracting it leaves 6p, and dividing every remaining term by 6 leaves p alone. That produces a direct rule. A squared output needs extra care: y2 = 1 allows y = 1 and y = −1. Those are two different outputs at one input. A cubed output instead has one real cube root, including for a negative input.

    4 The rule

    Choose the input and output.

    An explicit rule gives the output alone in terms of the input.
    An implicit rule keeps them mixed in an equation. Function status requires exactly one output for each allowed input.

    The same idea, five ways

    Say it

    p is a function of n

    Write it

    Choose n, and the rule determines one p.

    In math
    • 2n + 6p = 12
    • p=f(n)=2−13n
    • (n, p)
    Like

    A bill lets you recover one remaining amount after the known share is removed.

    See it
    n2 − 1/3ninputoutputp
    The input is n. The output p is given directly by the isolated formula.

    The same idea, other ways

    Separate a total

    In n + p = 8, choose input n = 3. The known share is 3, so the other share must be p = 5. Writing p = 8 − n does this same subtraction for every n.

    =n + p8do the same thing to both sides
    Subtract n from both sides to leave p = 8 − n.
    Count the possible outputs

    At x = 0, x2 + y2 = 1 becomes y2 = 1. Both 1 and −1 work. The full circle therefore fails the one-output promise, even though choosing only its top half would give one output per input.

    01-1not a function
    One input gives two different outputs on the full circle.

    Part 1: An explicit linear formula

    Picture a total made of two contributions. If you choose n, the amount 2n is already known, and the remaining total tells you 6p. Remove the known contribution, then divide the remainder into six equal groups to find p. That is what isolating the output means: p stands alone on one side of the equation. The other side uses the input n, so the formula gives the output directly without needing to solve a new equation each time.

    • With n as input and p as output, 2n + 6p = 12 becomes p = 12−2n6 = 2 − 13n.
    • Write p = f(n) = 2 − 13n. This is an explicit rule, also called an explicit formula. It gives the function in algebraic form.
    • There are no root or variable-denominator restrictions here, so every real n is allowed.
    (0, 2)(3, 1)−2246−11234
    y=−0.3333x+2.

    Reminder

    Reminder: Dividing a sum, Fraction multiplication
    • Dividing a sum. 12−2n6 = 126 − 2n6; every numerator term is divided by 6.
    • Fraction multiplication. 13×32=36=12.

    The same idea, five ways

    Say it

    p equals f of n

    Write it

    p is the output determined by input n.

    In math
    • 2n + 6p = 12
    • 6p=12−2n
    • p=f(n)=2−n3
    Like

    Remove the known share from a bill, then split what remains into six equal shares.

    See it
    (0, 2)(3, 1)−2246−11234
    The same picture again: y = −0.3333x + 2.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Divide only 6p by 6 and write p = 12 − 2n.
    Changing only one side destroys the equality. The entire other side must also be divided by 6.
    ✓ Instead: p=12−2n6=2−13n.

    Tips and tricks

    • Name the input and output before rearranging. Put the requested output alone on the left in the final answer.
    • After n is chosen, subtract its contribution 2n from 12. Six equal shares make 6p, so dividing that remainder by 6 finds one p.
    • 12−2n6 equals 126 − 2n6. The first fraction is 2; canceling the common factor 2 in the second gives n3. Therefore p = 2 − 13n.
    • As an everyday comparison: Picture a total made of two contributions. If you choose n, the amount 2n is already known, and the remaining total tells you 6p. Remove the known contribution, then divide the remainder into six equal groups to find p. That is what isolating the output means: p stands alone on one side of the equation. The other side uses the input n, so the formula gives the output directly without needing to solve a new equation each time.
    • With the worked values: For n = 0 and p = 2, the original left side is 0 + 12 = 12. For n = 32 and p = 32, it is 3 + 9 = 12. Both pairs satisfy the original equation.

    Part 2: A circle gives two heights at one input

    Imagine a round hoop centered at the crossing of two number lines. Fix a position left or right, and there may be two points on the hoop, one above and one below. The equation x2 + y2 = 1 describes this circle. At many inputs x, its two output heights y are opposites. The square root symbol selects a nonnegative number, but solving a squared equation must consider both signs. Choosing only the upper half makes a different relation with one output for each allowed input.

    • Subtract x2 to get y2 = 1 − x2. The symbol ± is read plus or minus: y = ±1−x2 includes both signs of the root. At x = 0, it gives y = 1 or y = −1.
    • At x = 0, the outputs 1 and −1 are different, so the whole circle does not define y as a function of x.
    • At x = −1 or x = 1, both signs give 0. One output at those two inputs does not repair the failures elsewhere.
    • The upper branch y = 1−x2 alone is a function with domain [−1, 1]. The lower branch y = −1−x2 alone is also a function.
    • Only −1 ≤ x ≤ 1 can work. If x is farther than 1 from zero, x2 exceeds 1 and y2 = 1 − x2 would be negative. For example, x = 2 gives y2 = −3, and no real square is negative.
    (0, 1)
    The point (0, 1) on the unit circle at 90°.

    Reminder

    Reminder: Principal square root, Real square roots
    • Principal square root. 4 = 2, while solving y2 = 4 gives y = 2 and y = −2.
    • Real square roots. A real square is nonnegative, so 1 − x2 must be at least 0 for a real circle height.

    The same idea, five ways

    Say it

    y equals plus or minus the square root of the whole difference one minus x squared

    Write it

    The full circle can have a top height and a bottom height at the same input.

    In math
    • x2+y2=1
    • y=±1−x2
    • (0, 1) and (0, −1)
    Like

    One left-right position on a hoop can have two heights.

    See it
    (0, 1)
    The same picture again: The point (0, 1) on the unit circle at 90°.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Because 1−x2 has one value, the whole circle is a function.
    The original squared equation accepts both signs. Keeping only the nonnegative root discards the lower half of the circle.
    ✓ Instead: The whole circle gives y = ±1−x2. Its upper half alone gives the function y = 1−x2.
    ✗ Not this: Any ± sign proves two different outputs, including y = ±0.
    +0 and −0 are the same number. To disprove a function, you need two different outputs at one allowed input.
    ✓ Instead: Use x = 0, giving y = 1 and y = −1. At x = 1 there is only y = 0.

    Tips and tricks

    • Distinguish evaluating a square root from solving a squared equation. Look for two different outputs, not only a ± symbol.
    • At the center's horizontal position x = 0, the hoop has a top point and a bottom point. Their heights are 1 and −1. The one-output definition fails at this single input, which is enough to reject the whole circle as a function in this direction.
    • Both 12 and (−1)2 equal 1. The equation y2 = 1 cannot select between them. The expression 1, in contrast, names the nonnegative root 1 by convention. It selects one branch rather than all circle points.
    • As an everyday comparison: Imagine a round hoop centered at the crossing of two number lines. Fix a position left or right, and there may be two points on the hoop, one above and one below. The equation x2 + y2 = 1 describes this circle. At many inputs x, its two output heights y are opposites. The square root symbol selects a nonnegative number, but solving a squared equation must consider both signs. Choosing only the upper half makes a different relation with one output for each allowed input.
    • With the worked values: For both fractional outputs, x2 + y2 = 925 + 1625 = 1. For both center outputs, 02 + (±1)2 = 1. The original equation accepts both signs, so the second output is real rather than an algebra error.

    Part 3: A cube root isolates a cubed output

    Imagine knowing how many blocks fill a cube and working backward to its side. A cube root undoes three copies multiplied together. For x − 64y3 = 0, choose x as the input and y as the output. First move 64y3 to the other side, then divide by 64. Taking the cube root gives one y, including when x is negative. A cube root has no plus-or-minus choice because opposite numbers have opposite cubes.

    • x − 64y3 = 0 gives 64y3 = x, then y3 = x64.
    • y = ∛(x64) = x34, because 43 = 64. Cubing x34 gives x64.
    • Every real x has one real cube root, so this defines y = f(x) = x34.
    • For comparison, x − y2 = 0 gives y2 = x. At x = 9 it permits y = 3 and y = −3, so that squared relation is not a function of x.
    −8(∛x)/4inputoutput−0.5
    Input −8 gives y = −12, whose cube is −18. The decimal −0.5 is exact and equals −12.

    Reminder

    Reminder: Signed cubes
    • Signed cubes. (−12)3=(−12)×(−12)×(−12)=−18.

    The same idea, five ways

    Say it

    y equals the cube root of x, divided by four

    Write it

    Each real x gives one real output y.

    In math
    • x−64y3=0
    • y3=x64
    • y=f(x)=x34
    Like

    Recover a cube's side by undoing three-factor multiplication.

    See it
    −8(∛x)/4inputoutput−0.5
    A negative input also has one real cube-root output. The decimal −0.5 is exact and equals −12.

    Worked example

    Isolate a cubed output and check a negative input

    Write x − 64y3 = 0 as y = f(x). Then find y when x = −8.

    What it asks. Find a direct rule for output y, then use it at one negative input.

    Show the steps and the answer

    The plan. Move the cubed term, divide by 64, take its single cube root, and check in the first equation.

    x = 64y3, so y3 = x64.

    y=f(x)=x34.

    f(−8)=∛(−8)4=−24=−12.

    −8−64(−12)3=−8−64(−18)=−8+8=0.

    1. Plan. Move the cubed term, divide by 64, take its single cube root, and check in the first equation.
    2. Add 64y3 to both sides.
    3. 64 is 43, so its cube root is 4.
    4. Cube roots of negative inputs are negative.
    1. x=64y3, so y3=x64.Adding 64y3 isolates the output term, then equal division by 64 isolates the cube.
    2. y=f(x)=x34.A cube root undoes cubing, and 43 = 64.
    3. f(−8)=∛(−8)4=−24=−12.(−2)3 = −8, then reduce the fraction.
    4. −8−64(−12)3=−8−64(−18)=−8+8=0.Substitution confirms that the isolated rule satisfies the original equation.
    Answer
    • y=f(x)=x34
    • At x = −8, y = −12.
    Double-check Cube the output: (−12)3 = −18. Multiplying by 64 gives −8, exactly the chosen input.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Write y = ±x34.
    The negative of a nonzero cube root cubes to the opposite sign, so it does not solve the same equation.
    ✓ Instead: Take one real cube root: y = x34.

    Tips and tricks

    • A square can lose the sign; a cube keeps it. Check a proposed cube root by multiplying three copies.
    • For x = 8, the positive output is 12. For x = −8, the negative output is −12.
    • As an everyday comparison: Imagine knowing how many blocks fill a cube and working backward to its side. A cube root undoes three copies multiplied together. For x − 64y3 = 0, choose x as the input and y as the output. First move 64y3 to the other side, then divide by 64. Taking the cube root gives one y, including when x is negative. A cube root has no plus-or-minus choice because opposite numbers have opposite cubes.
    • With the worked values: Cube the output: (−12)3 = −18. Multiplying by 64 gives −8, exactly the chosen input.

    Part 4: Good to know: an implicit rule

    A recipe may identify one result while leaving the ingredients mixed together. In x = y + 2y, y is mixed into both pieces on the right, so the output is not isolated. Read this as an example of an implicit rule, not a formula you need to memorize or learn to solve here.

    • The symbol 2y is a power with base 2. At the values used here, 22 = 4 and 2¹ = 2. Decreasing the exponent by one divides the total by 2: 4 ÷ 2 = 2, then 2 ÷ 2 = 1. Continuing that same pattern gives 2⁰ = 1. Thus the correct check 2 ÷ 2 = 21−1 = 2⁰ = 1 follows the descending pattern rather than requiring a new exponent rule. More generally, a nonzero number to power 0 is 1; descending one step from its first power divides it by itself.
    • A negative exponent means a reciprocal, not a negative result: 2−1 = 12 and 2−2 = 14. Multiplying by 2 once moves 14 to 12, then to 1, then to 2. This extends the same doubling pattern to negative exponents.
    • If y = 0, x = 0 + 1 = 1. If y = 1, x = 1 + 2 = 3. If y = 2, x = 2 + 4 = 6.
    • As y grows, both y and 2y grow, so their total cannot give the same x twice. This proves at most one y for a given x. There are also no gaps in the totals: both pieces change without jumping over any in-between value as y changes. Far to the left, 2y shrinks toward zero while y becomes as negative as needed; far to the right, y and 2y grow without bound. The totals therefore pass through every real x. Existence, meaning an answer is reached, together with uniqueness, meaning it is the only answer, gives exactly one y for each x. The algebra taught here does not provide a short formula with y alone.
    • You can have a function without having its output written as an explicit formula. The one-output promise decides.
    136012function
    These three input-output pairs illustrate the implicit rule.

    The same idea, five ways

    Say it

    x equals y plus two to the power y

    Write it

    The equation identifies y without writing a direct formula for it.

    In math
    • x=y+2y
    • (1, 0), (3, 1), (6, 2)
    Like

    A clue can identify one answer without handing you a finished recipe.

    See it

    x=y+2y

    The output y is not isolated

    One output per input still matters

    Worked example

    See three outputs of an implicit rule

    OpenStax problem

    For x = y + 2y, use y = 0, 1 and 2 to find three (x, y) pairs.

    What it asks. Verify three pairs rather than learn to solve the equation for arbitrary inputs.

    Show the steps and the answer

    The plan. Use the three power values stated above, add y, and place input x first in each pair.

    At y = 0, x = 0 + 1 = 1, giving (1, 0).

    At y = 1, x = 1 + 2 = 3, giving (3, 1).

    At y = 2, x = 2 + 4 = 6, giving (6, 2).

    1. Plan. Use the three power values stated above, add y, and place input x first in each pair.
    2. 2⁰ = 1, 2¹ = 2, and 22 = 4.
    3. The requested pair is (x, y), even though you calculate x from y here.
    1. At y=0,x=0+1=1, giving (1, 0).Use 2⁰ = 1 and put the input x first.
    2. At y=1,x=1+2=3, giving (3, 1).Use 2¹ = 2.
    3. At y=2,x=2+4=6, giving (6, 2).Use 22 = 4.
    Answer
    • (1, 0)
    • (3, 1)
    • (6, 2)
    Double-check Substituting the three pairs gives 1 = 0 + 1, 3 = 1 + 2, and 6 = 2 + 4. Samples illustrate the rule; the growing-total explanation supplies the reason it does not repeat an input x.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: If the output cannot be isolated with the algebra I know, there is no function.
    The definition asks how many outputs each input has. It does not demand a convenient formula.
    ✓ Instead: A mixed equation can define a function. Use the one-output requirement.

    Tips and tricks

    • Implicit means implied by an equation. Explicit means stated directly.
    • Keep the one-output definition in view; you do not need to memorize this equation.
    • As an everyday comparison: A recipe may identify one result while leaving the ingredients mixed together. In x = y + 2y, y is mixed into both pieces on the right, so the output is not isolated. Read this as an example of an implicit rule, not a formula you need to memorize or learn to solve here.
    • With the worked values: Substituting the three pairs gives 1 = 0 + 1, 3 = 1 + 2, and 6 = 2 + 4. Samples illustrate the rule; the growing-total explanation supplies the reason it does not repeat an input x.

    Part 5: Optional: why a mixed polynomial equation still has one output

    An equation can identify one answer without handing you a direct recipe. In y3 + y = x, choose input x and look for the output y that makes the total match. As y grows, its cube grows and y itself grows, so their sum cannot give the same x twice. The examples below first show exact matches. The final comparison is an optional way to locate an unfamiliar output between two tested values. You can read it after the main function skills; it is a further explanation, not a formula to memorize.

    • The equation y3 + y = x defines y as a function of x even while y remains mixed into the equation.
    • Cubing keeps the order for all real inputs. Larger positive inputs have larger positive cubes. Among negative inputs, the one farther left has a larger positive magnitude; cubing that magnitude and restoring the minus makes a smaller cube. A negative cube, zero and a positive cube cannot agree.
    • Adding y to its cube keeps the total increasing: a larger y raises both pieces, so two different y values cannot give the same total x.
    • There are no gaps in the totals: addition and multiplication vary without jumps, and the sum goes indefinitely negative and indefinitely positive. Every real x has a matching y.
    • This is an implicit description. A function does not have to arrive with a short explicit formula using the algebra skills taught here.
    • As y grows, y3 grows and y grows. Adding two growing quantities keeps the total growing. A fixed total x can therefore be reached only once.
    • For input x = 1, y = 12 produces total 58, which is too small, while y = 1 produces 2, which is too large. The matching y lies between them. You can keep testing values inside the interval to locate it more closely without isolating y first.
    -10-20210-2-1012function
    -10 → -2, -2 → -1, 0 → 0, 2 → 1 and 10 → 2: a function.

    Reminder

    Reminder: Signed cubes, Adding fractions
    • Signed cubes. (−2)3=(−2)(−2)(−2)=4(−2)=−8.
    • Adding fractions. 18+12=18+48=58.

    The same idea, five ways

    Say it

    y cubed plus y equals x

    Write it

    The input x identifies one output y even though y is not isolated.

    In math
    • y3+y=x
    • f(2) = 1
    • f(−10)=−2
    • 12<f(1)<1
    Like

    A growing total passes each amount once.

    See it
    -10-20210-2-1012function
    The same picture again: -10 → -2, -2 → -1, 0 → 0, 2 → 1 and 10 → 2: a function.

    Worked example

    Exact outputs and a bracket for an unfamiliar input

    Define f(x) to be the y satisfying y3 + y = x. Find f(2) and f(−10). Then locate f(1) between 12 and 1. Locate means show that the answer lies between those two numbers, not give a rounded decimal.

    What it asks. Verify two exact outputs. Optionally, place a third output between two trial values.

    Show the steps and the answer

    The plan. Substitute the basic proposed outputs first. Then compare totals at y = 12 and y = 1 with target input 1.

    0.51
    The matching output f(1) is between 12 and 1. Neither endpoint is the matching output.
    1. Plan. Substitute the basic proposed outputs first. Then compare totals at y = 12 and y = 1 with target input 1.
    2. The equation is y3 + y = x, with x as input and y as output.
    3. At y = 12, the total is 18 + 12 = 58, below 1.
    4. At y = 1, the total is 2, above 1. Increasing totals put the matching y between them.
    1. For x = 2, test y = 1: 13+1=1+1=2.A matching total makes the proposed output satisfy the equation.
    2. f(2)=1.The total y3 + y increases with y, so no other y can give total 2.
    3. For x = −10, test y = −2: (−2)3+(−2)=−8−2=−10.Cubing multiplies three copies of the signed input, and a negative cube is negative.
    4. f(−10)=−2.The matching total is unique for the same increasing-total reason.
    5. At y=12,y3+y=18+12=18+48=58<1.Cube the fraction, then add with a common denominator to see that this candidate's total is too small.
    6. At y=1,y3+y=2>1.This candidate's total is too large.
    7. 12<f(1)<1.The total increases without gaps, so it reaches 1 exactly once between these two tested outputs.
    Answer
    • f(2) = 1
    • f(−10)=−2
    • 12<f(1)<1
    Double-check Substitution gave totals 2 and −10 for the two exact outputs. For the interval, the endpoint totals 58 and 2 sit on opposite sides of 1; increasing totals ensure both a matching value and no second matching value.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: An equation is not a function whenever y cannot be isolated quickly.
    Function status depends on one output per input, not on the convenience of writing a formula. y3 + y = x has exactly one y for every real x.
    ✓ Instead: Check existence and uniqueness of the output. This increasing implicit rule defines a function.
    ✗ Not this: A few sample pairs alone prove every input has a unique output.
    A table of samples cannot rule out a hidden conflict elsewhere or establish that no inputs are missed.
    ✓ Instead: Use the increasing-total and no-gap arguments for all real values, then use sample substitutions as checks.

    Tips and tricks

    • Separate two questions: does an output exist for every allowed input, and can there be more than one output? An explicit formula is one way to answer them, not a requirement.
    • As an everyday comparison: An equation can identify one answer without handing you a direct recipe. In y3 + y = x, choose input x and look for the output y that makes the total match. As y grows, its cube grows and y itself grows, so their sum cannot give the same x twice. The examples below first show exact matches. The final comparison is an optional way to locate an unfamiliar output between two tested values. You can read it after the main function skills; it is a further explanation, not a formula to memorize.
    • With the worked values: Substitution gave totals 2 and −10 for the two exact outputs. For the interval, the endpoint totals 58 and 2 sit on opposite sides of 1; increasing totals ensure both a matching value and no second matching value.

    5 How

    1. Name the input letter and the requested output letter.
    2. Undo addition or subtraction around the output, doing the same operation to both sides.
    3. Divide every remaining term by the output's nonzero coefficient.
    4. For a cubed output, take its unique real cube root. For a squared output, keep both signs and test an input where they differ.
    5. Write the output alone as f(input) when possible, and check a pair in the equation you started with.
    6. If the equation stays mixed, remember that an awkward formula alone does not disprove a function.

    Get the requested output alone

    1
    Is the output multiplied by a nonzero number?
    YesFirst remove added terms, then divide every term by that number.
    NoLook for a power on the output.
    ↓
    2
    Is the output cubed?
    YesTake one real cube root. Check by cubing it.
    NoIf it is squared, both signs may be allowed.
    ↓
    3
    Do two different outputs work at one input?
    YesThe relation fails the function definition in this direction.
    NoUse the isolated rule, or read the short implicit-rule part.
    1. Name the input letter and the requested output letter.
    2. Undo addition or subtraction around the output, doing the same operation to both sides.
    3. Divide every remaining term by the output's nonzero coefficient.
    4. For a cubed output, take its unique real cube root. For a squared output, keep both signs and test an input where they differ.
    5. Write the output alone as f(input) when possible, and check a pair in the equation you started with.
    6. If the equation stays mixed, remember that an awkward formula alone does not disprove a function.

    6 Worked example

    Worked example

    Solving x2 - 4y = 12 for y, then for x

    The equation x2 - 4y = 12 relates two real variables, x and y. The figure shows its graph, a parabola whose lowest point is (0, -3) and which passes through the points (-4, 1), (2, -2) and (4, 1).
    (a) Use x as the input and y as the output. Solve the equation for y, write the result as f(x), and check one pair in the original equation.
    (b) Now use y as the input and x as the output. Solve the equation for x and decide whether x is a function of y. Use the points (-4, 1) and (4, 1) to support your answer.

    (-4, 1)(4, 1)(2, -2)(0, -3)−6−4−2246−4−2246
    The graph of x2 - 4y = 12, which is the parabola y = x24 - 3 with lowest point (0, -3).
    Show the steps and the answer
    1. Part (a). Name the input and the output. The input is x and the requested output is y. The rule x2-4y=12 is implicit, because x and y are mixed on the same side.The question asks for y in terms of x, so y must end up alone. Isolating it turns the implicit rule into an explicit one.
    2. Undo the addition around the output term. The left side is x2 added to the output term -4y, so subtract x2 from both sides. x2-4y-x2=12-x2 gives -4y=12-x2.Doing the same operation to both sides keeps the equation true, and it leaves only the output term on the left.
    3. Divide every remaining term by the coefficient -4. y=12-4-x2-4=-3+x24, so y=x24-3.The coefficient of y is -4. It is not zero, so dividing by it is allowed. Both the 12 and the x2 must be divided, and dividing by a negative number changes the sign of each term.
    4. Check the power on the output. y appears only to the first power and is not squared or cubed, so no root step is needed.Squaring x, dividing by 4 and subtracting 3 each produce exactly one number, so every real x gives exactly one y.
    5. Write the output alone as a function. f(x)=x24-3, for every real x. Check the pair x=2. f(2)=224-3=1-3=-2, and in the starting equation 22-4(-2)=4+8=12.An explicit rule with exactly one output for each allowed input is a function, so y is a function of x. Checking (2, -2) in the original equation, not in our own rearrangement, catches any sign or division slip.
    6. Part (b). Swap the roles. The input is now y and the requested output is x.The same equation can be read in either direction. Whether it gives a function depends on which letter is the output.
    7. Undo the subtraction around the output term. 4y is subtracted from x2, so add 4y to both sides. x2-4y+4y=12+4y gives x2=4y+12. The coefficient of x2 is 1, so dividing by it changes nothing.Adding 4y to both sides keeps the equation balanced and leaves the output term alone on the left. Dividing every term by 1 leaves each term unchanged.
    8. The output is squared, so keep both signs. x=4y+12 or x=-4y+12, which can be written x=±4y+12. Real outputs need 4y+12≥0, so the allowed inputs are y≥-3.A number and its opposite have the same square, so both signs satisfy x2 = 4y + 12. Keeping only one sign would quietly drop solutions of the original equation.
    9. Test an input where the two signs differ. y=-3 will not work, because 4(-3)+12=0 and both signs give x=0. Use y=1 instead. 4(1)+12=16, so x=16=4 or x=-16=-4.The two formulas give different outputs only when the number under the root is positive, so the test input must make 4y + 12 greater than 0.
    10. Check both pairs in the starting equation. 42-4(1)=16-4=12 and (-4)2-4(1)=16-4=12, so both (4, 1) and (-4,1) are genuine solutions.The test only counts if both outputs really satisfy the original equation, not just the rearranged one.
    11. Conclude. The allowed input y=1 has two outputs, x=4 and x=-4, so x is not a function of y and no single f(y) gives x. On the graph, the horizontal line y=1 meets the parabola at (-4,1) and (4, 1).A function needs exactly one output for each allowed input, so one input with two checked outputs is enough to fail. The verdict rests on these two outputs, not on the two-sign formula merely looking awkward.
    Answer
    (a) y = f(x) = x24 - 3 for every real x, so y is a function of x. (b) x = 4y+12 or x = -4y+12 for y ≥ -3. The input y = 1 gives both x = 4 and x = -4, so x is not a function of y.
    Double-check Try another input in (a). f(-4) = (-4)24 - 3 = 164 - 3 = 1, and (-4)2 - 4(1) = 16 - 4 = 12, so (-4, 1) satisfies the original equation. Also f(0) = -3 and 02 - 4(-3) = 12, which gives the lowest point (0, -3). On the graph, every vertical line meets the parabola exactly once, which gives one y for each x as in (a). The horizontal line y = 1 meets it twice, at (-4, 1) and (4, 1), which gives two x-values for one y as in (b).

    Work to write

    1. Part (a): input x, output y
    2. -4y=12-x2
    3. y=12-4-x2-4=x24-3
    4. f(x) = x24 - 3, for every real x
    5. Check (2, -2): 22 - 4(-2) = 4 + 8 = 12
    6. Part (b): input y, output x, so x2 = 4y + 12
    7. x = 4y+12 or x = -4y+12
    8. y = 1: x = 4 or x = -4, and 42 - 4(1) = 12, (-4)2 - 4(1) = 12
    9. y = 1 has two outputs, so x is not a function of y

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 4

    Subtract the known share

    Write n + p = 8 as p = f(n).

    What it asks. Get output p alone, keeping n as the input.

    Show the steps and the answer

    The plan. Subtract n from both sides.

    n + p − n = 8 − n, so p = 8 − n.

    1. Plan. Subtract n from both sides.
    2. Treat n as the chosen amount.
    3. The remaining amount is 8 − n.
    1. n+p−n=8−n, so p=8−n.Equal subtraction removes the input term from the output side.
    Answer
    p=f(n)=8−n
    Double-check At n = 3, p = 5, and 3 + 5 = 8.

    Rung 2 of 4

    Remove several copies of the input

    Write 3n + p = 11 as p = f(n).

    What it asks. Isolate p after removing three copies of n.

    Show the steps and the answer

    The plan. Subtract the entire known contribution 3n.

    3n + p − 3n = 11 − 3n, so p = 11 − 3n.

    1. Plan. Subtract the entire known contribution 3n.
    2. 3n is one complete term.
    3. Subtract 3n from each side.
    1. 3n+p−3n=11−3n, so p=11−3n.Subtracting the same known contribution preserves equality and leaves p alone.
    Answer
    p=f(n)=11−3n
    Double-check At n = 2, p = 5. The original left side is 6 + 5 = 11.

    Rung 3 of 4

    Divide every remaining term

    Write 5n + 2p = 14 as p = f(n).

    What it asks. Find one p after removing the input's share and splitting the remainder into two.

    Show the steps and the answer

    The plan. Subtract 5n, then divide both numerator terms by 2.

    2p=14−5n.

    p=14−5n2=7−52n.

    1. Plan. Subtract 5n, then divide both numerator terms by 2.
    2. First leave 2p on its own.
    3. 14−5n2=7−52n.
    1. 2p=14−5n.Equal subtraction isolates the output term.
    2. p=14−5n2=7−52n.Equal division by 2 reaches every term, including 5n.
    Answer
    p=f(n)=7−52n
    Double-check At n = 2, p = 2. Then 5(2) + 2(2) = 10 + 4 = 14.

    Rung 4 of 4

    Divide by a negative coefficient

    Write 6n − 3p = 18 as p = f(n).

    What it asks. Isolate p when its multiplier is negative.

    Show the steps and the answer

    The plan. Subtract 6n, then divide every term by −3.

    −3p=18−6n.

    p=18−6n−3=−6+2n=2n−6.

    1. Plan. Subtract 6n, then divide every term by −3.
    2. −3p=18−6n.
    3. 18÷(−3)=−6;(−6n)÷(−3)=2n.
    1. −3p=18−6n.Subtracting 6n isolates the output term.
    2. p=18−6n−3=−6+2n=2n−6.Division by −3 changes the sign of both numerator terms.
    Answer
    p=f(n)=2n−6
    Double-check At n = 4, p = 2. The original left side is 24 − 6 = 18.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Every equation relating two variables automatically defines one as a function of the other.
    An equation can allow two different outputs for one input, as the circle does at x = 0.
    ✓ Instead: Identify the direction and check the one-output requirement.
    ✗ Not this: Any appearance of ± means the relation fails to be a function at that input.
    When the square root is zero, both signs give the same output. The conflict requires two different values.
    ✓ Instead: For the circle, x = 1 gives only y = 0, while x = 0 gives y = 1 and y = −1, proving the relation fails overall.
    ✗ Not this: A mixed equation cannot define a function.
    An equation can determine one output without providing a convenient direct formula.
    ✓ Instead: Read the implicit-rule note: x = y + 2y determines one y for each x.

    Tips and tricks

    • Choose and label the direction before manipulating the equation.
    • An explicit formula makes the output visible. A mixed equation can also give one output, as the short implicit-rule note explains.
    • One input with two different outputs is enough to disprove a function. One input with one output is not enough to prove the whole relation is a function.

    7 The trap

    Discarding the negative square-root solution when the original equation permits it. A root expression chooses one branch; a squared equation may include both.

    Comes back in

    Problems marked OpenStax come from Precalculus 2e by Jay Abramson, published by OpenStax, under the CC BY-NC-SA 4.0 licence. Access for free at https://openstax.org/books/precalculus-2e/pages/1-introduction-to-functions.