Graphs of linear functions — quick review
Draw a line by plotting points
Picture a city map.
Rule: Graph a linear function by plotting at least two distinct coordinate pairs (x, f(x)) and drawing the entire straight line through them. A third point checks the arithmetic.
1. Choose input values. If the slope contains a fraction, try multiples of its denominator. Multiples are results of multiplying by whole numbers: for a denominator of 3, use 0 × 3 = 0, 1 × 3 = 3 and 2 × 3 = 6.
2. Substitute each input into the function to find its output.
3. Record the pairs in a values picture, then plot each input across and output up.
4. Draw a straight line through the points and extend it both ways.
5. If a third point misses the line, recalculate before drawing.
Choose convenient inputs.
Compute one output per input using multiplication before addition.
Plot at least two distinct points and check a third.
Extend the straight line through the points.
Graph the linear function f(x) = −x + 5 by plotting points. Choose three inputs, find their outputs, record the coordinate pairs in a values picture, plot them, and draw the line. Use the third point to check the arithmetic before drawing.
The graph is the straight line through (0, 5), (5, 2) and (10, −1), extended in both directions. It crosses the y-axis at (0, 5) and falls 3 units for every 5 units to the right.
Plotting (3, 3) as output first can hide the mistake because both numbers match. Practice with (0, 5): across 0, then up 5. The input always comes first.
linear function
A rule of the form f(x) = mx + b, with fixed numbers m and b. Its graph is a straight nonvertical line, and equal input changes give equal output changes.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
coordinate pair
An address written (x, y). The first number tells your horizontal position and the second tells your vertical position. On a function's graph, they are input and output.
x-axis
The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.
y-axis
The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
function
A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.
coefficient
The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.
denominator
The bottom number of a fraction. It specifies the equal parts in a whole, or the divisor. A denominator cannot be zero in a defined fraction.
fraction
One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.
order of operations
The agreed calculation order: grouping, powers, multiplication and division, then addition and subtraction. Within equal-priority operations, work left to right. A power repeats multiplication.
term
One piece being added or subtracted in an expression.
constant
A fixed number. A constant term has no changing variable attached.
Start at the y-intercept and walk the slope
Picture walking along a ramp drawn on a map.
Rule: In y = mx + b, the y-intercept is (0, b) and m = = , with ≠ .
1. Read b, then substitute 0 to verify the point (0, b).
2. Read m. Write a whole-number slope over 1.
3. Choose signed rise and run whose quotient is m.
4. Start at (0, b), move by that run and rise, and repeat.
5. Draw the line through the points. Check one point by substitution.
Identify the y-intercept (0, b).
Turn m into a signed rise divided by a signed run.
Walk that change at least twice.
Check the plotted outputs in the original equation.
Graph the line y = −x + 6 by starting at its y-intercept and walking the slope. State the y-intercept, give a signed rise and run that match the slope, find two more points to the right of the y-axis and one point to the left of it, then draw the line and check one of your points by substitution.
The y-intercept is (0, 6). With rise −3 and run 2, the walk lands on (2, 3) and (4, 0); with rise 3 and run −2 it lands on (−2, 9). The graph is the straight line through these points. It falls 3 units for every 2 units to the right and crosses the x-axis at (4, 0).
Reading − as down 3 and right 2. The top is rise, the bottom is run. Write the two movements beside the fraction before plotting.
linear function
A rule of the form f(x) = mx + b, with fixed numbers m and b. Its graph is a straight nonvertical line, and equal input changes give equal output changes.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
x-axis
The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.
y-axis
The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.
y-intercept
Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).
initial value
The output when the input is 0. In a linear function f(x) = mx + b, it is b. It describes the amount present before input-dependent change begins.
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
rate of change
How much an output changes for each unit of input change. For a linear function it is constant and equals the slope. Its units are output units per input unit.
rise
The signed vertical change between two points, − . An upward move has positive rise, and a downward move has negative rise.
run
The signed horizontal change between two points, − . A rightward move has positive run, and a leftward move has negative run.
function
A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.
domain
The collection of allowed inputs for a function. A formula may accept every real input while a practical situation permits only meaningful quantities.
coefficient
The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.
fraction
One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.
ratio
A comparison made by division. Slope compares vertical change with horizontal change as the ratio rise divided by run.
equation
A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.
vertical displacement
The signed change in vertical position. Between graph points it is the rise, − . Going down produces a negative displacement.
horizontal displacement
The signed change in horizontal position. Between graph points it is the run, − . Going left produces a negative displacement.
product
The answer to multiplication.
term
One piece being added or subtracted in an expression.
quotient
The answer to division.
constant
A fixed number. A constant term has no changing variable attached.
Build a line by changing the identity function
Picture a flexible drawing of a ramp.
Rule: To transform y = x into y = mx + b, multiply outputs by m, including a reflection if m < 0, then shift outputs by b. Stretch if |m| > 1; compress if 0 < |m| < 1.
1. Sketch the identity function y = x using (0, 0) and (1, 1).
2. Read |m|, the size of m without its sign, to decide whether heights stretch or compress.
3. If m < 0, reflect the heights across the x-axis as part of that multiplication.
4. Add b to every new height. Positive b moves up; negative b moves down.
5. Verify a point in the final formula. Multiplication must occur before this stated shift.
You need to transform y = x into y = 2x and show what happens to a point.
y = 2x.
The point (3, 3) becomes (3, 6).
The point (−3, −3) becomes (−3, −6).
Choose the stated positive factor greater than 1.
Multiply each point's output by that factor, leaving its input fixed.
Check a transformed point in the resulting formula.
Choose the stated positive factor between 0 and 1.
Multiply each output by that factor without changing its input.
Check that nonzero output distances from 0 are smaller, then substitute into the new formula.
Keep each input coordinate.
Multiply each output by −1.
Plot two changed points and check them in y = −f(x).
Keep each input.
Add the stated signed shift to every output.
Plot two moved points and substitute their inputs into f(x) + b.
Write the input as x − h and identify h, including its sign.
Move an old point (u, v) to (u + h, v). The letter u names its old input and v its old output.
Substitute the new input u + h into f(x − h), which sends it back to old input u.
Start with y = x.
Multiply its heights by m, interpreting size and sign separately.
Add b to the new heights.
Substitute one input in the final formula and compare.
Doing the stated downward shift first and then halving the heights. That produces (x − 3) = x − , a different line.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
x-axis
The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.
y-axis
The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.
origin
The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.
y-intercept
Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
rise
The signed vertical change between two points, − . An upward move has positive rise, and a downward move has negative rise.
run
The signed horizontal change between two points, − . A rightward move has positive run, and a leftward move has negative run.
identity function
The function f(x) = x, whose output equals its input. Its graph passes through the origin and has slope 1.
transformation
A change to a graph made by changing its rule. Shifts move it, reflections flip it, and stretches or compressions change how far points sit from an axis.
vertical stretch
Multiplying every output by a positive factor greater than 1. Points move farther from the x-axis, while their inputs stay fixed. For y = x, the resulting line is steeper.
vertical compression
Multiplying every output by a positive factor between 0 and 1. Points move closer to the x-axis, while their inputs stay fixed. For y = x, the resulting line is flatter.
vertical reflection
Multiplying every output by −1. Each point keeps its input but reverses its height, so the graph flips across the x-axis.
vertical shift
Adding the same number to every output. A positive addition moves a graph up; a negative addition moves it down. For a line, its slope stays the same.
absolute value
A number's distance from 0, so it is never negative. For a slope, its absolute value measures steepness without recording whether the line rises or falls.
function
A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.
coefficient
The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.
fraction
One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.
order of operations
The agreed calculation order: grouping, powers, multiplication and division, then addition and subtraction. Within equal-priority operations, work left to right. A power repeats multiplication.
horizontal shift
Moving a graph left or right without changing its shape. The rule g(x) = f(x − h) moves points right h when h is positive.
equation
A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.
factor
One of the numbers multiplied to make a product. A whole-number factor of a positive whole number divides it with nothing left over.
product
The answer to multiplication.
Read a graph and write its equation
Picture finding the instructions for a ramp after seeing only its drawing.
Rule: Read b at (0, b), calculate m = , then write f(x) = mx + b. If b is hidden, use b = − m.
1. Read the y-intercept if it is shown. Confirm that the first coordinate is 0.
2. Choose two clearly marked points. Keep their order the same in both subtractions.
3. Compute rise divided by run and reduce the fraction.
4. Write the slope and intercept in f(x) = mx + b.
5. Substitute both points to verify the recovered equation.
Find two readable points and compute slope.
Find b from a visible y-intercept or from b = y − mx.
For matching, compare b, slope sign, then slope size.
Verify the chosen equation at a point other than the intercept.
The graph shows a straight line. It crosses the y-axis at the marked point (0, −2) and passes through the marked points (−4, −5) and (4, 1). Write the equation of the line in the form f(x) = mx + b. Read the y-intercept, find the slope from the two marked points (−4, −5) and (4, 1) and reduce it, write the function, and substitute both points to verify it.
f(x) = x − 2, with slope and y-intercept (0, −2).
Subtracting the output coordinates in one direction and the input coordinates in the opposite direction. Write arrows between the two points, then use that same direction for both differences.
Choose two points in order from left to right.
Subtract ending output minus starting output.
Use the change's sign to name increasing or decreasing; zero change means constant.
Read the y-intercept.
Check slope sign.
Measure slope if several choices remain.
Substitute a marked point into the chosen formula.
linear function
A rule of the form f(x) = mx + b, with fixed numbers m and b. Its graph is a straight nonvertical line, and equal input changes give equal output changes.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
y-axis
The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.
origin
The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.
y-intercept
Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
rise
The signed vertical change between two points, − . An upward move has positive rise, and a downward move has negative rise.
run
The signed horizontal change between two points, − . A rightward move has positive run, and a leftward move has negative run.
slope-intercept form
The writing y = mx + b, or f(x) = mx + b. It displays the slope m and the initial value b, giving the y-intercept point (0, b).
increasing function
A function whose outputs grow as its inputs grow over the input values being discussed. A linear function with positive slope is increasing across its whole domain.
decreasing function
A function whose outputs shrink as its inputs grow over the input values being discussed. A linear function with negative slope is decreasing across its whole domain.
function
A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.
coefficient
The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.
fraction
One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.
equation
A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.
factor
One of the numbers multiplied to make a product. A whole-number factor of a positive whole number divides it with nothing left over.
term
One piece being added or subtracted in an expression.
constant
A fixed number. A constant term has no changing variable attached.
Find where the line reaches the x-axis
Picture a ramp crossing a painted line on the floor.
Rule: Set f(x) = 0 to find x-intercepts. For f(x) = mx + b with m ≠ 0, x = − and the point is (−, 0).
1. Replace the output f(x) or y with 0. This selects points lying on the x-axis.
2. Solve the resulting equation for the input.
3. Substitute that found input into the original function. Its output must be 0.
4. State the input value and the coordinate point (x, 0).
5. If m = 0, inspect the constant output instead of dividing by zero.
Choose the axis: output 0 for x-axis, input 0 for y-axis.
For an x-intercept, solve mx + b = 0.
Check the found input in the original formula.
Include the 0 coordinate in the answer point.
The graph shows the line f(x) = 5x + 8, which passes through the marked points (−2, −2), (−1, 3) and (0, 8). (a) Use the graph and the marked points to estimate where the line reaches the x-axis. Then find the x-intercept exactly by setting f(x) = 0, check it by substitution, and state it both as an x-value and as a point. (b) Keep the y-intercept 8 but change the slope to 0, giving g(x) = 0x + 8. Decide whether the graph of g reaches the x-axis, and explain why the rule x = − cannot be used for g.
(a) x = − (that is, −1.6). The line reaches the x-axis at the point (−, 0). (b) g(x) = 8 is never 0, so the horizontal line y = 8 has no x-intercept. The rule − fails for g because m = 0 would mean dividing by zero.
Setting x = 0 to find the x-intercept. The axis name tells you which coordinate is allowed to vary: on the x-axis, x varies while y stays 0.
linear function
A rule of the form f(x) = mx + b, with fixed numbers m and b. Its graph is a straight nonvertical line, and equal input changes give equal output changes.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
x-axis
The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.
y-axis
The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.
origin
The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.
y-intercept
Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
rise
The signed vertical change between two points, − . An upward move has positive rise, and a downward move has negative rise.
run
The signed horizontal change between two points, − . A rightward move has positive run, and a leftward move has negative run.
x-intercept
Where a graph meets the x-axis. The output there is 0. The intercept value is the input x, and its full point is (x, 0).
horizontal line
A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.
reciprocal
The number that multiplies with a given nonzero number to make 1. For a fraction, exchange its numerator and denominator while keeping its sign. Zero has no reciprocal.
function
A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.
coefficient
The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.
fraction
One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.
equation
A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.
product
The answer to multiplication.
term
One piece being added or subtracted in an expression.
constant
A fixed number. A constant term has no changing variable attached.
Horizontal and vertical lines
Picture a shelf and a flagpole.
Rule: A horizontal line has equation y = c and slope 0. A vertical line has equation x = c, undefined slope, and is not a function of x.
1. Compare the coordinates of two distinct points.
2. If their y-values match, keep that output fixed: y = c.
3. If their x-values match, keep that input fixed: x = c.
4. Check both given points in the equation.
5. Do not force a vertical line into y = mx + b.
You need the line through (−3, −4) and (5, −4).
y = −4.
Slope: 0.
Read the coordinates of at least two distinct points.
Keep the repeated coordinate letter and value in the equation.
Compute rise and run if a slope is requested.
Use the function requirement to decide whether it can be y = f(x).
Writing y = 7 for the vertical line. Say what stays fixed before choosing the letter. Fixed across position means x; fixed height means y.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
x-axis
The horizontal number line on a coordinate graph. Every point on it has y = 0. Positive x goes right and negative x goes left.
y-axis
The vertical number line on a coordinate graph. Every point on it has x = 0. Positive y goes up and negative y goes down.
y-intercept
Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
rise
The signed vertical change between two points, − . An upward move has positive rise, and a downward move has negative rise.
run
The signed horizontal change between two points, − . A rightward move has positive run, and a leftward move has negative run.
x-intercept
Where a graph meets the x-axis. The output there is 0. The intercept value is the input x, and its full point is (x, 0).
horizontal line
A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.
vertical line
A line with the same horizontal coordinate at every point. Its equation is x = c. Its slope is undefined, and it is not a function of x.
constant function
A function that gives the same output for every input in its domain. Its graph is horizontal, and its rate of change is 0.
undefined slope
The situation on a vertical line: its run is 0, so rise divided by run requires division by 0. No numerical slope exists. Undefined slope is different from slope 0.
vertical line test
A graph represents y as a function of x exactly when every vertical line meets it at most once. Two meetings would give one input two different outputs.
function
A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.
numerator
The top number of a fraction. It counts how many of the denominator's equal-sized parts you have, or names the amount being divided.
denominator
The bottom number of a fraction. It specifies the equal parts in a whole, or the divisor. A denominator cannot be zero in a defined fraction.
fraction
One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.
equation
A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.
constant
A fixed number. A constant term has no changing variable attached.
Compare parallel and perpendicular lines
Picture two straight train tracks and two edges of a square tile.
Rule: Nonvertical lines are parallel when = and ≠ ; coincident when both match. Lines with finite nonzero slopes are perpendicular when = −1. Horizontal and vertical lines are perpendicular.
1. Rewrite each nonvertical equation with y alone so its slope is visible.
2. Equal slopes and different intercepts mean parallel lines.
3. Equal slopes and equal intercepts mean coincident lines.
4. Otherwise multiply the slopes. A product of −1 means perpendicular lines.
5. Handle a vertical line separately: it is perpendicular to a horizontal line, and parallel to another distinct vertical line.
You need to decide whether y = x + 1 and y = x − 2 are parallel.
They are parallel.
Isolate y in each nonvertical equation.
Check equal slopes and then intercepts.
For unequal finite nonzero slopes, multiply and compare with −1.
Check horizontal/vertical pairs separately.
Changing only the sign or only flipping the fraction for a perpendicular slope. Both moves are needed, and the product must be −1.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
rise
The signed vertical change between two points, − . An upward move has positive rise, and a downward move has negative rise.
run
The signed horizontal change between two points, − . A rightward move has positive run, and a leftward move has negative run.
slope-intercept form
The writing y = mx + b, or f(x) = mx + b. It displays the slope m and the initial value b, giving the y-intercept point (0, b).
horizontal line
A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.
vertical line
A line with the same horizontal coordinate at every point. Its equation is x = c. Its slope is undefined, and it is not a function of x.
undefined slope
The situation on a vertical line: its run is 0, so rise divided by run requires division by 0. No numerical slope exists. Undefined slope is different from slope 0.
parallel lines
Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.
coincident lines
Two line equations whose graphs are the same line. For slope-intercept equations, both the slopes and y-intercepts match. Every point on one is also on the other.
perpendicular lines
Lines that meet at a right angle. For finite nonzero slopes, one is the negative reciprocal of the other, and their product is −1. Horizontal and vertical lines are also perpendicular.
right angle
An angle measuring 90°, which is one quarter of a full turn. Perpendicular lines form right angles where they meet.
reciprocal
The number that multiplies with a given nonzero number to make 1. For a fraction, exchange its numerator and denominator while keeping its sign. Zero has no reciprocal.
negative reciprocal
The opposite of a nonzero number's reciprocal. Flip the fraction, then reverse its sign. Its product with the original number is −1, which connects finite nonzero perpendicular slopes.
coefficient
The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.
numerator
The top number of a fraction. It counts how many of the denominator's equal-sized parts you have, or names the amount being divided.
denominator
The bottom number of a fraction. It specifies the equal parts in a whole, or the divisor. A denominator cannot be zero in a defined fraction.
fraction
One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.
equation
A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.
product
The answer to multiplication.
term
One piece being added or subtracted in an expression.
constant
A fixed number. A constant term has no changing variable attached.
Write a parallel or perpendicular line through a point
Picture choosing a road's direction and then moving it until it passes through your house.
Rule: Choose m equal to the given slope for a parallel line, or m = − for a perpendicular line with nonzero finite given slope. Through (, ), use y − = m(x − ).
1. Find the original slope from its equation or from two points.
2. Choose the new slope: same for parallel, negative reciprocal for perpendicular.
3. Insert the new slope and the required point in point-slope form, or use b = − m.
4. Expand and isolate y if slope-intercept form is wanted.
5. Plug the supplied point into the final equation and check the slope relationship.
Keep the old slope.
Substitute the supplied point to find b.
Plug b back in and verify different intercepts.
Check for a horizontal or vertical given line.
Otherwise take the negative reciprocal of its slope.
Use the point to find b and plug it back in.
Find the given slope.
Decide same direction or right-angle direction.
Choose the new slope or the appropriate horizontal/vertical equation.
Anchor the new line at the supplied point.
Check the point and relationship in the original conditions.
The graph shows the line x + 2y = 6, which crosses the axes at (0, 3) and (6, 0), and the point P(−4, −1), which is not on the line. (a) Write, in slope-intercept form, an equation of the line through P that is parallel to x + 2y = 6. (b) Write, in slope-intercept form, an equation of the line through P that is perpendicular to x + 2y = 6. Check each answer by substituting P and by comparing slopes.
(a) Parallel: y = −x − 3. (b) Perpendicular: y = 2x + 7.
Using the old slope in a perpendicular problem, or using the old intercept after changing the slope. Choose the direction first, then use the new point to find the new intercept.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
y-intercept
Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
rise
The signed vertical change between two points, − . An upward move has positive rise, and a downward move has negative rise.
run
The signed horizontal change between two points, − . A rightward move has positive run, and a leftward move has negative run.
slope-intercept form
The writing y = mx + b, or f(x) = mx + b. It displays the slope m and the initial value b, giving the y-intercept point (0, b).
horizontal line
A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.
vertical line
A line with the same horizontal coordinate at every point. Its equation is x = c. Its slope is undefined, and it is not a function of x.
parallel lines
Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.
right angle
An angle measuring 90°, which is one quarter of a full turn. Perpendicular lines form right angles where they meet.
reciprocal
The number that multiplies with a given nonzero number to make 1. For a fraction, exchange its numerator and denominator while keeping its sign. Zero has no reciprocal.
negative reciprocal
The opposite of a nonzero number's reciprocal. Flip the fraction, then reverse its sign. Its product with the original number is −1, which connects finite nonzero perpendicular slopes.
point-slope form
The equation y − = m(x − ). It describes a nonvertical line using slope m and a known point (, ). Each change is measured from that point.
coefficient
The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.
equation
A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.
product
The answer to multiplication.
term
One piece being added or subtracted in an expression.
constant
A fixed number. A constant term has no changing variable attached.
Use an intersection to find break-even
Picture selling notebooks at a table.
Rule: C(x) = F + vx, R(x) = px, and profit P(x) = R(x) − C(x). Break-even satisfies C(x) = R(x). For F > 0 and p > v, x = .
1. Define the input quantity and its units; count sold items as nonnegative whole numbers.
2. Put fixed expense at the cost intercept and per-item expense at the cost slope.
3. Put selling price at the revenue slope, with revenue 0 before any sales.
4. Set cost equal to revenue and solve for the quantity.
5. Plug the quantity into both functions, then report quantity and dollars together.
6. Compare revenue with cost to tell profit from loss.
7. If the calculated quantity is between whole items, the model has no exact whole-item break-even. When each sale contributes a positive amount, use the next whole count to reach nonnegative profit.
You need the cost rule for a $10 setup fee and $3 per item, then the cost of 4 items.
C(x) = 10 + 3x.
C(4) = $22.
Construct cost and revenue functions.
Set them equal and solve for quantity.
Plug that quantity into both original functions.
Subtract cost from revenue to interpret other quantities.
Identify fixed cost F, per-item cost v and sale price p.
Write C(x) = F + vx and R(x) = px.
Set F + vx = px, then solve for x.
Plug the found quantity into both functions.
Report quantity, common dollar amount and zero profit.
If whole items are required, distinguish an exact whole crossing from a fractional model crossing.
Confusing the shared revenue with profit. At break-even both cost and revenue can be large, but profit is their difference, which is 0.
graph
A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.
input
The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.
output
The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.
origin
The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.
initial value
The output when the input is 0. In a linear function f(x) = mx + b, it is b. It describes the amount present before input-dependent change begins.
slope
A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.
rise
The signed vertical change between two points, − . An upward move has positive rise, and a downward move has negative rise.
run
The signed horizontal change between two points, − . A rightward move has positive run, and a leftward move has negative run.
transformation
A change to a graph made by changing its rule. Shifts move it, reflections flip it, and stretches or compressions change how far points sit from an axis.
x-intercept
Where a graph meets the x-axis. The output there is 0. The intercept value is the input x, and its full point is (x, 0).
undefined slope
The situation on a vertical line: its run is 0, so rise divided by run requires division by 0. No numerical slope exists. Undefined slope is different from slope 0.
parallel lines
Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.
break-even point
The quantity and money amount where total revenue equals total cost. It is the intersection of their graphs. At that quantity, profit is 0.
fixed cost
A cost that stays the same as the number of items changes within a model. It is present even at quantity 0 and contributes the cost function's initial value.
variable cost
The part of cost that changes with the number of items. In a linear model, a constant cost per item multiplied by quantity gives the total variable cost.
cost function
A rule giving total cost for an input quantity. In a linear model, C(x) = vx + F adds total variable cost vx to fixed cost F.
revenue
The money received from sales before subtracting costs. If every item sells for the same price, total revenue is price multiplied by the number sold.
revenue function
A rule giving sales money for an input quantity. With a constant selling price p and quantity x sold, R(x) = px. Selling 0 items then produces revenue 0.
profit
Revenue minus total cost. A positive result is money remaining after costs. A negative result is a loss, and 0 means break-even.
function
A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.
domain
The collection of allowed inputs for a function. A formula may accept every real input while a practical situation permits only meaningful quantities.
coefficient
The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.
fraction
One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.
order of operations
The agreed calculation order: grouping, powers, multiplication and division, then addition and subtraction. Within equal-priority operations, work left to right. A power repeats multiplication.
equation
A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.
variable
A letter representing a number that may change or is unknown. The same letter has the same value everywhere within one equation.
product
The answer to multiplication.
term
One piece being added or subtracted in an expression.
divisor
The number you divide by. It must be nonzero in defined division.
nonnegative
Zero or positive. Nonnegative numbers include 0 and exclude every negative number.
continuous model
A model allowing inputs between whole-number counts. A drawn line may cross at a fractional input even when actual sales require whole items.