Quarry School

Use an intersection to find break-even

Subject: MathematicsLeans on: Linear modelLeans on: Decimal divisionLeans on: SystemsLeans on: SubstitutionLeans on: Parallel linesLeans on: Signed subtraction
Level 2 · BuildingAbout 20 min read5 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Picture selling notebooks at a table.

    Rule

    Rule: C(x) = F + vx, R(x) = px, and profit P(x) = R(x) − C(x). Break-even satisfies C(x) = R(x). For F > 0 and p > v, x = Fp−v.

    Step

    1. 1. Define the input quantity and its units; count sold items as nonnegative whole numbers.

    2. 2. Put fixed expense at the cost intercept and per-item expense at the cost slope.

    3. 3. Put selling price at the revenue slope, with revenue 0 before any sales.

    4. 4. Set cost equal to revenue and solve for the quantity.

    5. 5. Plug the quantity into both functions, then report quantity and dollars together.

    6. 6. Compare revenue with cost to tell profit from loss.

    7. 7. If the calculated quantity is between whole items, the model has no exact whole-item break-even. When each sale contributes a positive amount, use the next whole count to reach nonnegative profit.

    Question

    You need the cost rule for a $10 setup fee and $3 per item, then the cost of 4 items.

    Answer

    C(x) = 10 + 3x.
    C(4) = $22.

    Strategy

    1. Construct cost and revenue functions.

    2. Set them equal and solve for quantity.

    3. Plug that quantity into both original functions.

    4. Subtract cost from revenue to interpret other quantities.

    Strategy

    1. Identify fixed cost F, per-item cost v and sale price p.

    2. Write C(x) = F + vx and R(x) = px.

    3. Set F + vx = px, then solve for x.

    4. Plug the found quantity into both functions.

    5. Report quantity, common dollar amount and zero profit.

    6. If whole items are required, distinguish an exact whole crossing from a fractional model crossing.

    Trap

    Confusing the shared revenue with profit. At break-even both cost and revenue can be large, but profit is their difference, which is 0.

    Term

    graph

    Definition

    A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

    Term

    input

    Definition

    The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

    Term

    output

    Definition

    The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

    Term

    origin

    Definition

    The point (0, 0), where the x-axis and y-axis meet. It is the starting address for measuring horizontal and vertical positions.

    Term

    initial value

    Definition

    The output when the input is 0. In a linear function f(x) = mx + b, it is b. It describes the amount present before input-dependent change begins.

    Term

    slope

    Definition

    A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

    Term

    rise

    Definition

    The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

    Term

    run

    Definition

    The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

    Term

    transformation

    Definition

    A change to a graph made by changing its rule. Shifts move it, reflections flip it, and stretches or compressions change how far points sit from an axis.

    Term

    x-intercept

    Definition

    Where a graph meets the x-axis. The output there is 0. The intercept value is the input x, and its full point is (x, 0).

    Term

    undefined slope

    Definition

    The situation on a vertical line: its run is 0, so rise divided by run requires division by 0. No numerical slope exists. Undefined slope is different from slope 0.

    Term

    parallel lines

    Definition

    Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.

    Term

    break-even point

    Definition

    The quantity and money amount where total revenue equals total cost. It is the intersection of their graphs. At that quantity, profit is 0.

    Term

    fixed cost

    Definition

    A cost that stays the same as the number of items changes within a model. It is present even at quantity 0 and contributes the cost function's initial value.

    Term

    variable cost

    Definition

    The part of cost that changes with the number of items. In a linear model, a constant cost per item multiplied by quantity gives the total variable cost.

    Term

    cost function

    Definition

    A rule giving total cost for an input quantity. In a linear model, C(x) = vx + F adds total variable cost vx to fixed cost F.

    Term

    revenue

    Definition

    The money received from sales before subtracting costs. If every item sells for the same price, total revenue is price multiplied by the number sold.

    Term

    revenue function

    Definition

    A rule giving sales money for an input quantity. With a constant selling price p and quantity x sold, R(x) = px. Selling 0 items then produces revenue 0.

    Term

    profit

    Definition

    Revenue minus total cost. A positive result is money remaining after costs. A negative result is a loss, and 0 means break-even.

    Term

    function

    Definition

    A rule assigning exactly one output to each allowed input. Different inputs may share an output, but one input cannot receive two different outputs.

    Term

    domain

    Definition

    The collection of allowed inputs for a function. A formula may accept every real input while a practical situation permits only meaningful quantities.

    Term

    coefficient

    Definition

    The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

    Term

    fraction

    Definition

    One number divided by another nonzero number, written with a top and bottom. It can describe part of a whole, a quotient or a comparison.

    Term

    order of operations

    Definition

    The agreed calculation order: grouping, powers, multiplication and division, then addition and subtraction. Within equal-priority operations, work left to right. A power repeats multiplication.

    Term

    equation

    Definition

    A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

    Term

    variable

    Definition

    A letter representing a number that may change or is unknown. The same letter has the same value everywhere within one equation.

    Term

    product

    Definition

    The answer to multiplication.

    Term

    term

    Definition

    One piece being added or subtracted in an expression.

    Term

    divisor

    Definition

    The number you divide by. It must be nonzero in defined division.

    Term

    nonnegative

    Definition

    Zero or positive. Nonnegative numbers include 0 and exclude every negative number.

    Term

    continuous model

    Definition

    A model allowing inputs between whole-number counts. A drawn line may cross at a fractional input even when actual sales require whole items.

    1 In plain words

    Picture selling notebooks at a table. Before you sell anything, you pay for the table. Each notebook also costs money to make. Cost is all the money you spend. Revenue is all the money customers pay you. The break-even point is where those two amounts match: sales have paid for the expenses, and no profit remains yet. Profit means revenue minus cost, the amount left after expenses. On a graph, quantity goes across and dollars go up. The cost and revenue lines meet at break-even. Their common height is the dollar amount, while the across coordinate tells you how many items you must sell.

    2 Picture it

    (0, 2.5e+04)(−2.5e+06, 0)break-even3500002.1e+06750022500375005250067500(0, 2.5e+04)(−2.5e+06, 0)break-even3500001.4e+062.45e+063.5e+06750022500375005250067500
    y = 0.01x + 25000, solid, beside y = 0.02x, dashed, its point labelled “break-even”.

    Reminder

    Reminder: Linear model, Decimal division, Systems, Substitution, Parallel lines, Signed subtraction
    • Linear model. A $10 fixed fee plus $3 per item is 10 + 3x.
    • Decimal division. 25,000 ÷ 0.01 = 2,500,000 because multiplying both numbers by 100 makes the divisor 1.
    • Systems. C(x) = R(x) selects a shared output at the same input.
    • Substitution. R(5) = 5 × 5 = 25 when the selling-price rule is R(x) = 5x.
    • Parallel lines. Equal rates and different starting fees keep the same gap at every input.
    • Signed subtraction. 20 − 22 = −2, a deficit of 2; 15 − 14 = 1, an excess of 1.

    3 Why

    If fixed cost is F and each item costs v to produce, total cost is C(x) = F + vx: the starting expense plus x repeated item expenses. If each sells for p, revenue is R(x) = px. Equating them gives F = (p − v)x. The difference p − v is each sale's contribution toward the fixed expense. Once enough contributions cover F, cost equals revenue. A positive fixed cost cannot be covered by sales when p ≤ v, because each contribution is zero or negative.

    4 The rule

    C(x)=F+ vx, R(x)= px, and profit P(x)=R(x)−C(x).

    Break-even satisfies C(x)=R(x). For F > 0 and p > v, x=Fp−v.

    The same idea, five ways

    Say it

    find how many sales pay for all the expenses.

    Write it

    At the break-even point, revenue equals cost and profit is zero.

    In math
    • C(x) = F + vx
    • R(x) = px
    • C(x) = R(x)
    • P(x)=R(x)−C(x)
    • x=Fp−v,p>v
    Like

    Each sale puts a little money toward paying back the table fee.

    See it
    (0, 2.5e+04)(−2.5e+06, 0)break-even3500002.1e+06750022500375005250067500
    The same picture again: y = 0.01x + 25000, solid, beside y = 0.02x, dashed, its point labelled “break-even”.

    The same idea, other ways

    As a shared height

    At break-even, the cost and revenue graphs have the same dollar height at the same quantity.

    (0, 2.5e+04)(−2.5e+06, 0)(2,500,000, 50,000)3500002.1e+06750022500375005250067500
    y = 0.01x + 25000, solid, beside y = 0.02x, dashed, its point labelled “(2,500,000, 50,000)”.
    As repeated contributions

    If an item sells for $5 and costs $3 to make, each sale leaves $2 toward a $10 setup fee. Five sales contribute 5 × $2 = $10.

    5 sales$2 each toward setupinputoutput$10 covered
    Per-sale contributions cover the fixed cost.

    Part 1: Cost function

    Fixed cost is a bill you pay once even if you make no items. Variable cost changes with quantity, such as buying paper for each notebook. A cost function adds those two expenses. In a linear model, per-item production cost is the cost slope, and fixed cost is the initial value.

    • Rule: C(x) = F + vx.
    • Rule: Fixed cost F is paid at quantity 0; variable cost vx grows with quantity.
    • Rule: Production models usually use x ≥ 0, with whole-number quantities for individual items.
    (0, 10)(−3.33, 0)fixed cost2468412202836
    The cost line starts at $10.

    Reminder

    Reminder: Order of operations, Initial value
    • Order of operations. 10 + 3 × 4 = 10 + 12 = 22.
    • Initial value. C(0) = 10 is the starting expense before production.

    The same idea, five ways

    Say it

    starting bill plus the bill for each item.

    Write it

    Total cost combines fixed and variable cost.

    In math
    • fixed cost: F
    • variable cost: vx
    • C(x) = F + vx
    • C(0) = F
    Like

    The table fee plus the paper bill for your notebooks.

    See it
    (0, 10)(−3.33, 0)fixed cost2468412202836
    Cost starts at the fixed expense, then rises by the per-item amount.

    Worked example

    Build a small cost model

    You need the cost rule for a $10 setup fee and $3 per item, then the cost of 4 items.

    Show the steps and the answer
    (0, 10)(−3.33, 0)4 items, $222468412202836
    The cost point combines the setup bill and four item expenses.
    1. Write C(x)=10+3x.The fixed cost is paid once, and per-item cost repeats x times.
    2. C(4)=10+3×4=22.Four item expenses total 12 before adding the setup fee.
    Answer
    • C(x) = 10 + 3x.
    • C(4) = $22.
    Double-check The separate bills are $10 and $12, and $10 + $12 = $22.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: C(x) = (10 + 3)x when setup is $10 and each item costs $3.
    That formula charges the setup fee once per item instead of once total. At 4 items it gives $52.
    ✓ Instead: Use C(x) = 10 + 3x, which gives $22 at 4 items.

    Tips and tricks

    • The fixed bill belongs outside the multiplication by quantity.

    Part 2: Revenue function

    Revenue is the money coming in from sales before subtracting expenses. If each item sells for the same price, multiply the number sold by that price. Receiving money is different from keeping money; some of the revenue pays the cost.

    • Rule: R(x) = px when each of x items sells for price p.
    • Rule: In this model R(0) = 0 because no sales bring in no money.
    (0, 0)(−0, 0)2468412202836
    Revenue has zero starting value in this sales model.

    Reminder

    Reminder: Repeated addition
    • Repeated addition. 5 × 4 is four payments of 5.

    The same idea, five ways

    Say it

    sale price times number sold.

    Write it

    Revenue records total sales money before expenses.

    In math
    • R(x) = px
    • R(0) = 0
    Like

    The contents of the payment box before paying the bills.

    See it
    (0, 0)(−0, 0)no sales4 sales, $202468412202836
    Revenue starts at 0 and increases by $5 for each sale.

    Worked example

    Separate sales money from profit

    You need revenue from selling 4 items at $5 each.

    Show the steps and the answer
    (0, 0)(−0, 0)4 sales, $202468412202836
    The revenue height gives sales money, not the remaining profit.
    1. Write R(x)=5x.The same selling price repeats for each item.
    2. R(4)=5×4=20.This is sales money before paying production or setup expenses.
    Answer
    • R(x) = 5x.
    • R(4) = $20.
    Double-check Adding four $5 payments gives $20, the same as multiplication.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: $20 of revenue means $20 of profit.
    Profit must subtract the cost. If cost is $22, the remaining amount is negative.
    ✓ Instead: Profit is $20 − $22 = −$2, meaning a $2 loss.

    Tips and tricks

    • Revenue means money in; profit means money left after cost.

    Part 3: Break-even, profit and loss

    At break-even, all the sales money pays all the bills. Profit is zero. If revenue is larger, the difference is profit. If revenue is smaller, the negative difference records a loss. For item sales, use only quantities that make sense in the situation. Sometimes the graphs meet between two whole counts. You cannot sell part of an individual item, so, when each sale brings in more than it costs to make, the first whole count above that crossing is the first that covers the cost.

    • Rule: Solve C(x) = R(x) to find break-even.
    • Rule: P(x) > 0 means profit; P(x) < 0 means loss; P(x) = 0 means break-even.
    • Rule: With a positive fixed cost and selling price no greater than per-item cost, there is no nonnegative break-even quantity.
    • Rule: A continuous model permits every nonnegative real input, including fractions between whole counts. A fractional break-even input is a crossing in that model. For whole items, there is no exact break-even count unless that input is whole; the next whole count is the first with nonnegative profit when p > v.
    (0, 10)(−3.33, 0)break-even2468412202836
    The equal height is the shared dollar total.

    Reminder

    Reminder: System of equations, Signed subtraction
    • System of equations. Cost equals revenue uses the same method as setting two line outputs equal.
    • Signed subtraction. 20 − 22 = −2 records a loss of 2.

    The same idea, five ways

    Say it

    money in minus money spent tells what remains.

    Write it

    Break-even has no profit and no loss because cost equals revenue.

    In math
    • P(x)=R(x)−C(x)
    • P(x) = 0
    • R(x) > C(x): profit
    • R(x) < C(x): loss
    Like

    You have paid back the table fee when each sale's contribution has added up to it.

    See it
    (0, 10)(−3.33, 0)break-even2468412202836
    At five items, both lines have height $25.

    Worked example

    A small break-even point

    You need the number of $5 sales that cover a $10 setup fee and $3 production cost per item. Then repeat the interpretation if the setup fee is $5 instead of $10.

    Show the steps and the answer
    (0, 10)(−3.33, 0)(5, 25)2468412202836
    The quantity coordinate is 5; the dollar coordinate is 25.
    model crossing3 sales revenue24281420
    The model crosses between 2 and 3 whole sales; 3 is the first count whose revenue covers cost.
    1. Set 10+3x=5x.The same quantity must make cost and revenue equal.
    2. Subtract 3x: 10=2x. Divide by 2 to find x=5.Each sale contributes $2 toward the fixed fee.
    3. Plug in: C(5)=10+15=25 and R(5)=25.Both original dollar amounts must match at the found quantity.
    4. Compute P(5)=25−25=0.The equality means no money remains after expenses.
    5. For a $5 setup fee, set 5 + 3x = 5x. Subtract 3x to get 5 = 2x and divide by 2: x=52=2.5.Equality finds the continuous-model crossing, even when it falls between actual whole-item counts.
    6. Plug in 2.5: C(2.5)=5+7.5=12.5 and R(2.5)=12.5.Substitution confirms the model's fractional crossing; 2.5 is exact, not rounded.
    7. At 2 whole items, profit is 10−11=−1. At 3, profit is 15−14=1.Only whole sales counts are allowed. Two sales still lose money; the next whole count, 3, covers the expense.
    Answer
    • With the $10 setup fee: 5 items.
    • Cost = revenue = $25.
    • Profit = $0.
    • With a $5 setup fee: the model crosses at 2.5 items.
    • Model cost = revenue = $12.50.
    • There is no exact whole-item break-even.
    • Three sales first give nonnegative profit, namely $1.
    Double-check Five contributions of $2 total $10, exactly the setup fee.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: the break-even answer is $25 with no quantity.
    The dollar coordinate tells the money involved, while the question asks how many sales are needed.
    ✓ Instead: Report 5 items, where both amounts are $25.

    Tips and tricks

    • Label the two coordinates with units so you do not exchange quantity and dollars.

    5 How

    1. Define the input quantity and its units; count sold items as nonnegative whole numbers.
    2. Put fixed expense at the cost intercept and per-item expense at the cost slope.
    3. Put selling price at the revenue slope, with revenue 0 before any sales.
    4. Set cost equal to revenue and solve for the quantity.
    5. Plug the quantity into both functions, then report quantity and dollars together.
    6. Compare revenue with cost to tell profit from loss.
    7. If the calculated quantity is between whole items, the model has no exact whole-item break-even. When each sale contributes a positive amount, use the next whole count to reach nonnegative profit.

    Build and solve a break-even model

    1
    Are the cost and revenue formulas already supplied?
    YesUse them directly and equate their outputs.
    NoBuild them from the fixed fee, production rate and selling price.
    ↓
    2
    With positive fixed cost, is p > v?
    YesThe contribution p − v is positive; divide F by it.
    NoNo nonnegative quantity covers the positive fixed expense under this model.
    ↓
    3
    Is the solved quantity a whole number when whole items are required?
    YesIt is an exact break-even count; report its quantity and dollar amount.
    NoThere is no exact whole-item break-even. With p > v, the next whole count is the first with nonnegative profit; check that count in both formulas.
    1. Identify fixed cost F, per-item cost v and sale price p.
    2. Write C(x) = F + vx and R(x) = px.
    3. Set F + vx = px, then solve for x.
    4. Plug the found quantity into both functions.
    5. Report quantity, common dollar amount and zero profit.
    6. If whole items are required, distinguish an exact whole crossing from a fractional model crossing.

    6 Worked example

    Worked example

    Break-even for a craft-fair bracelet table

    A school art club rents a table at a one-day craft fair to sell friendship bracelets. The table rental is a flat $22, the materials for each bracelet cost $2, and the club sells each bracelet for $6. Let x be the number of bracelets sold. The graph shows the club's cost line, which meets the vertical axis at (0, 22) and passes through (8, 38). (a) Write the cost function C(x) and the revenue function R(x), and confirm that C(x) fits both marked points. (b) Sketch the revenue line on the same axes and estimate where the two lines cross. (c) Find the break-even point exactly by setting C(x) = R(x). Check it in both functions, and give both the quantity and the dollar amount. (d) Compare revenue with cost on each side of the break-even point. Bracelets are sold only in whole numbers, so decide whether the club can break even exactly. Then find the fewest bracelets it must sell so that its profit is not negative.

    Show the steps and the answer
    (0, 22)(8, 38)246810618304254
    The cost line C(x) = 22 + 2x for the bracelet table.
    1. Let x= the number of bracelets sold during the fair. Since x counts bracelets, the real sales are whole numbers x=0, 1, 2, 3, …, and both C(x) and R(x) are measured in dollars.Cost and revenue must use the same input and the same money unit before they can be compared, and a club cannot sell a negative or fractional bracelet.
    2. The $22 table fee is owed even if nothing sells, so the cost intercept is F=22. Each bracelet adds $2 of materials, so the cost slope is v=2. This gives C(x)=22+2x. Check it against the graph: C(0)=22 and C(8)=22+2(8)=38. The slope between the marked points is 38−228−0=168=2.A fixed expense is the cost at x = 0, which is where a line meets the vertical axis. A per-item expense is how much the cost rises for each extra item, which is the slope.
    3. Each bracelet brings in $6, and no sales bring in $0, so R(x)=6x. Sketch this line on the same axes through (0, 0), (5, 30) and (10, 60).Revenue is price times quantity, so its line starts at the origin and its slope is the selling price p = 6.
    4. Read the sketch. At x=0 the revenue line sits $22 below the cost line. At x=5 the revenue line is at 30 and the cost line is at 32, so revenue is still lower. At x=6 they are at 36 and 34, so revenue is now higher. The lines cross between 5 and 6 bracelets, at a height a little above $30.Break-even is where the two lines meet, and a graph estimate gives a target that the exact answer must agree with. The $22 gap shrinks by 6 − 2 = $4 for each bracelet, so it takes a little more than 5 bracelets to close it.
    5. Set cost equal to revenue: 22+2x=6x. Subtract 2x from both sides: 22=4x. Divide both sides by 4: x=224=112=5.5.Where the lines intersect they have the same height, so the two expressions are equal there. The result matches the rule x = Fp−v = 226−2 = 5.5, because each bracelet earns $4 toward the $22 fee.
    6. Put x=5.5 into both functions: C(5.5)=22+2(5.5)=22+11=33 and R(5.5)=6(5.5)=33. The lines meet at (5.5, 33). That is 5.5 bracelets, with $33 of cost and $33 of revenue.Equal outputs confirm that 5.5 solves the equation, and the shared output is the dollar coordinate. A break-even point is reported as a quantity together with its dollars.
    7. Profit is P(x)=R(x)−C(x)=6x−(22+2x)=4x−22. For x < 5.5, P(x) < 0, so R(x) < C(x) and the club has a loss. For x > 5.5, P(x) > 0, so R(x) > C(x) and the club has a profit. On the graph, the revenue line lies below the cost line to the left of the crossing and above it to the right.The sign of R(x) − C(x) tells profit from loss, and which line is on top shows the same thing on the graph.
    8. 5.5 lies between the whole counts 5 and 6, so no whole number of bracelets breaks even exactly. At x=5,R(5)=30 and C(5)=32, a $2 loss. At x=6,R(6)=36 and C(6)=34, a $2 profit. Each bracelet adds 6−2= $4 to profit, so every count from 6 upward is profitable. The club must sell at least 6 bracelets.Only whole bracelets can be sold. When each sale contributes a positive amount, profit increases with x, so the next whole count above the break-even quantity is the fewest sales with nonnegative profit.
    Answer
    C(x) = 22 + 2x and R(x) = 6x meet at (5.5, 33), so the break-even point is 5.5 bracelets, where cost and revenue are both $33. Bracelets are sold whole, so the club cannot break even exactly. Selling 5 bracelets gives a $2 loss ($30 revenue against $32 cost), and selling 6 gives a $2 profit ($36 against $34). The club must sell at least 6 bracelets to avoid a loss.
    Double-check Rule: x = Fp−v = 226−2 = 224 = 5.5, the same quantity. Both functions give 33 at x = 5.5, so the dollar coordinate is consistent. Profit: P(x) = 4x − 22 gives P(5.5) = 22 − 22 = 0, P(5) = 20 − 22 = −2 and P(6) = 24 − 22 = 2. These match the $2 loss at 5 bracelets and the $2 profit at 6. The graph estimate, a crossing between 5 and 6 bracelets a little above $30, agrees with (5.5, 33).

    Work to write

    1. x = number of bracelets sold; x = 0, 1, 2, …
    2. C(x) = 22 + 2x
    3. R(x) = 6x
    4. 22 + 2x = 6x
    5. 22 = 4x, so x = 224 = 5.5
    6. C(5.5) = 22 + 2(5.5) = 33 and R(5.5) = 6(5.5) = 33
    7. Break-even point (5.5, 33): 5.5 bracelets and $33
    8. x = 5: R(5) = 30 < C(5) = 32, a $2 loss
    9. x = 6: R(6) = 36 > C(6) = 34, a $2 profit
    10. No exact whole-bracelet break-even; sell at least 6 bracelets

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 4

    A small setup bill

    You need to find how many sales cover a $6 setup fee when each item costs $2 to make and sells for $5. Assume each item made is sold.

    Show the steps and the answer
    (0, 6)(−3, 0)2 items, $10242610141822
    At two sales, both the expense and sales heights are $10.
    1. Write C(x)=6+2x and R(x)=5x.The one-time bill starts the cost; repeated item costs and sale prices multiply the quantity.
    2. Set 6+2x=5x.This selects a quantity at which money spent equals money received.
    3. Subtract 2x from both sides: 6=3x.Each sale contributes 5 − 2 = 3 dollars toward the setup bill.
    4. Divide by 3: x=2.This finds how many $3 contributions cover the $6 fixed expense.
    5. Check C(2)=6+4=10 and R(2)=5×2=10.Both original rules must return the same dollar amount.
    Answer
    • 2 items.
    • Cost = revenue = $10.
    • Break-even point: (2, 10).
    • Profit: $0.
    Double-check Two contributions of $3 total $6, independently covering the setup bill.

    Rung 2 of 4

    Prices with decimals

    You need the break-even quantity with an $84 setup fee, production cost $1.50 per item, and sale price $3.25 per item. Assume every item produced is sold.

    Show the steps and the answer
    (0, 84)(−56, 0)48 items, $1567213549632472120168216
    The cost begins at $84; the revenue catches it at 48 items.
    1. Write C(x)=84+1.50x and R(x)=3.25x. Set 84+1.50x=3.25x.A common input must give equal costs and revenue at break-even.
    2. Multiply every term by 100: 8,400+150x=325x.This clears the two-place decimal coefficients and scales the fixed fee too.
    3. Subtract 150x: 8,400=175x.The remaining coefficient corresponds to each sale's $1.75 contribution, measured in cents.
    4. Divide by 175: x=48, because 175×48=8,400.This finds the quantity paying the setup bill.
    5. Check C(48)=84+1.50×48=84+72=156.The original cost formula verifies the total expense.
    6. Check R(48)=3.25×48=156.The original revenue formula gives the same total, so the solved count works.
    Answer
    • 48 items.
    • Cost = revenue = $156.
    • Break-even point: (48, 156).
    Double-check The contribution route gives 48 × $1.75 = $84, exactly the starting bill. All decimals here are exact prices.

    Rung 3 of 4

    A fraction is not a sale count

    You need the model crossing and the first whole-item count covering costs when setup is $19, production is $4 per item, and sale price is $7. All produced items are sold.

    Show the steps and the answer
    (0, 19)(−4.75, 0)model crossing7 sales revenue7 items cost2468721354963
    The lines meet between 6 and 7 items, while seven whole sales cover the expense.
    1. Write C(x)=19+4x and R(x)=7x, then set 19+4x=7x.The equality selects equal dollar amounts at the same quantity.
    2. Subtract 4x: 19=3x. Divide by 3: x=193=6+13.Each sale contributes $3, and six contributions do not yet cover $19.
    3. At the model input 193,C=19+763=573+763=1333, and R=1333.Equal thirds verify the continuous-model crossing exactly, without rounding.
    4. At 6 items, C(6)=19+24=43 and R(6)=42. Profit is 42−43=−1.The lower whole count has not covered costs.
    5. At 7 items, C(7)=19+28=47 and R(7)=49. Profit is 49−47=2.The next whole count covers costs because each extra sale adds a positive $3 contribution.
    Answer
    • Model crossing: (193, 1333).
    • No exact whole-item break-even exists.
    • First whole count covering costs: 7 items.
    • At 7 items: cost $47.
    • At 7 items: revenue $49.
    • At 7 items: profit $2.
    Double-check Profit at whole count x is 3x − 19. It is −1 at 6 and 2 at 7, so the first acceptable count is 7, agreeing with both cost/revenue substitutions.

    Rung 4 of 4

    Sales that cannot cover the bill

    You need to decide whether a $21 setup fee can be covered if each item costs $4 to make. Check a $4 sale price, then a $3 sale price. Assume all produced items are sold and x is nonnegative.

    Show the steps and the answer
    (0, 21)(−5.25, 0)cost at 2revenue at 22468618304254
    With equal price and per-item cost, revenue always remains $21 below cost.
    (0, 21)(−5.25, 0)cost at 2revenue at 22468618304254
    When price is below per-item cost, the loss grows with every allowed sale.
    1. With a $4 sale price, C(x)=21+4x and R(x)=4x. Set 21+4x=4x.Break-even still asks for equal dollar outputs.
    2. Subtract 4x from both sides: 21=0. There is no solution.The contribution is $4 − $4 = $0, so no sale pays any part of the positive setup bill.
    3. Check x=2: cost is 21+8=29, revenue is 8, and profit is −21.The original formulas show the same unpaid setup bill; it remains at every quantity.
    4. With a $3 sale price, use R(x) = 3x. Set 21 + 4x = 3x, then subtract 4x: 21=−x.Each sale now costs $1 more than it brings in.
    5. Divide by −1: x=−21. Reject this input because item quantity must be 0 or greater.The algebraic crossing lies outside the context's domain, so it is not a break-even sales count.
    6. Plug −21 into both algebraic formulas: C(−21)=21−84=−63 and R(−21)=−63. Then check an allowed quantity: C(2)=29 and R(2)=6.The first check verifies the algebra but does not make negative items meaningful. The allowed count still loses money.
    7. For every allowed x, profit is 3x−(21+4x)=−21−x<0.The initial loss of $21 grows as nonnegative quantity grows; no allowed input breaks even.
    Answer
    • Sale price $4: no break-even quantity.
    • Sale price $3: no nonnegative break-even quantity.
    • The algebraic crossing at x = −21 is outside the allowed sales domain.
    Double-check The contributions are 0 and −1 dollar per item. Neither can pay a positive $21 setup bill, confirming both results directly.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: $50,000 at the crossing is the company's profit.
    The company also spent $50,000, so none of the sales money is left after cost.
    ✓ Instead: Profit is $50,000 − $50,000 = $0.
    ✗ Not this: Counterexample: two telephone plans with the same per-minute rate but different flat fees must eventually cost the same.
    Their slopes match and their intercepts differ, so the fee gap stays fixed at every usage amount.
    ✓ Instead: They are parallel cost lines and do not have an equal-cost quantity.

    Tips and tricks

    • Memory cue: break-even means the difference breaks even at 0.
    • Before solving, say what x counts and what each output measures.
    • Understand, then rebuild it when needed: the formula F ÷ (p − v) comes from cost equals revenue; the reason matters more than memorizing the division.
    • Know cold
      Coordinate order: across, then up or down; x comes before y.
      Slope: rise over run.
      Axis crossings: the other coordinate is 0.
      HOY: Horizontal, 0 slope, Y equation. VUX: Vertical, Undefined slope, X equation.
      Parallel: match slopes, compare intercepts. Perpendicular: flip and sign, then check product −1, except horizontal against vertical.
      System solutions: shared input, shared output.
    • Understand, then rebuild it when needed
      Tables come from substituting inputs, so you do not need to memorize individual coordinates.
      Transformation order comes from multiplication before addition.
      An x-intercept comes from solving output = 0.
      A line through a point comes from measuring changes from that point.
      An intersection comes from equal outputs.
      Break-even comes from cost equals revenue.
    • Put on the cheat sheet
      y = mx + b.
      m = y2−y1x2−x1, x2 ≠ x1.
      y − y1 = m(x − x1).
      b = y1 − mx1.
      x-intercept: x = −bm, m ≠ 0.
      Perpendicular slope: −1m, m ≠ 0 and slope finite.
      C(x) = F + vx; R(x) = px; profit = R(x) − C(x).
      Break-even: C(x) = R(x).
      These are also the compact printable formulas for this section. For the closed-book exam, practice rebuilding each from its reason.

    7 The trap

    Confusing the shared revenue with profit. At break-even both cost and revenue can be large, but profit is their difference, which is 0.