Quarry School

Write a parallel or perpendicular line through a point

Subject: MathematicsLeans on: Slope from two pointsLeans on: Negative reciprocalLeans on: Point-slope formLeans on: DistributionLeans on: Solving for the interceptLeans on: Multiplying signed numbers
Level 1 · FoundationsAbout 10 min read6 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Picture choosing a road's direction and then moving it until it passes through your house.

    Rule

    Rule: Choose m equal to the given slope for a parallel line, or m = −1mgiven for a perpendicular line with nonzero finite given slope. Through (x1, y1), use y − y1 = m(x − x1).

    Step

    1. 1. Find the original slope from its equation or from two points.

    2. 2. Choose the new slope: same for parallel, negative reciprocal for perpendicular.

    3. 3. Insert the new slope and the required point in point-slope form, or use b = y1 − mx1.

    4. 4. Expand and isolate y if slope-intercept form is wanted.

    5. 5. Plug the supplied point into the final equation and check the slope relationship.

    Strategy

    1. Keep the old slope.

    2. Substitute the supplied point to find b.

    3. Plug b back in and verify different intercepts.

    Strategy

    1. Check for a horizontal or vertical given line.

    2. Otherwise take the negative reciprocal of its slope.

    3. Use the point to find b and plug it back in.

    Strategy

    1. Find the given slope.

    2. Decide same direction or right-angle direction.

    3. Choose the new slope or the appropriate horizontal/vertical equation.

    4. Anchor the new line at the supplied point.

    5. Check the point and relationship in the original conditions.

    Question

    The graph shows the line x + 2y = 6, which crosses the axes at (0, 3) and (6, 0), and the point P(−4, −1), which is not on the line. (a) Write, in slope-intercept form, an equation of the line through P that is parallel to x + 2y = 6. (b) Write, in slope-intercept form, an equation of the line through P that is perpendicular to x + 2y = 6. Check each answer by substituting P and by comparing slopes.

    Answer

    (a) Parallel: y = −12x − 3. (b) Perpendicular: y = 2x + 7.

    Trap

    Using the old slope in a perpendicular problem, or using the old intercept after changing the slope. Choose the direction first, then use the new point to find the new intercept.

    Term

    graph

    Definition

    A picture of number pairs. Each plotted point places its first number horizontally and its second number vertically. A function's graph shows its inputs and corresponding outputs.

    Term

    input

    Definition

    The number you put into a function's rule. It appears inside the function's parentheses and is usually the horizontal coordinate x on its graph.

    Term

    output

    Definition

    The number a function gives after using its input. It is written f(x), and it is the vertical coordinate y when the function is graphed.

    Term

    y-intercept

    Definition

    Where a graph meets the y-axis. Its input is x = 0. For y = mx + b, the intercept value is b and the intercept point is (0, b).

    Term

    slope

    Definition

    A line's signed vertical change divided by its signed horizontal change. It tells the output change per input unit. A vertical line has no defined slope because its horizontal change is 0.

    Term

    rise

    Definition

    The signed vertical change between two points, y2 − y1. An upward move has positive rise, and a downward move has negative rise.

    Term

    run

    Definition

    The signed horizontal change between two points, x2 − x1. A rightward move has positive run, and a leftward move has negative run.

    Term

    slope-intercept form

    Definition

    The writing y = mx + b, or f(x) = mx + b. It displays the slope m and the initial value b, giving the y-intercept point (0, b).

    Term

    horizontal line

    Definition

    A line with the same vertical coordinate at every point. Its equation is y = c for a fixed number c, and its slope is 0.

    Term

    vertical line

    Definition

    A line with the same horizontal coordinate at every point. Its equation is x = c. Its slope is undefined, and it is not a function of x.

    Term

    parallel lines

    Definition

    Distinct lines in the same plane that never meet. Nonvertical parallel lines have equal slopes and different y-intercepts. Two distinct vertical lines are parallel too.

    Term

    right angle

    Definition

    An angle measuring 90°, which is one quarter of a full turn. Perpendicular lines form right angles where they meet.

    Term

    reciprocal

    Definition

    The number that multiplies with a given nonzero number to make 1. For a fraction, exchange its numerator and denominator while keeping its sign. Zero has no reciprocal.

    Term

    negative reciprocal

    Definition

    The opposite of a nonzero number's reciprocal. Flip the fraction, then reverse its sign. Its product with the original number is −1, which connects finite nonzero perpendicular slopes.

    Term

    point-slope form

    Definition

    The equation y − y1 = m(x − x1). It describes a nonvertical line using slope m and a known point (x1, y1). Each change is measured from that point.

    Term

    coefficient

    Definition

    The number multiplying a variable. In a linear function's slope-intercept form, the coefficient of the input variable is its slope.

    Term

    equation

    Definition

    A statement that two expressions have equal values. A solution makes the equality true. Adding the same amount to both sides preserves their equality.

    Term

    product

    Definition

    The answer to multiplication.

    Term

    term

    Definition

    One piece being added or subtracted in an expression.

    Term

    constant

    Definition

    A fixed number. A constant term has no changing variable attached.

    1 In plain words

    Picture choosing a road's direction and then moving it until it passes through your house. The direction alone does not pick one road; many separated roads can share it. The house address finishes the choice. For a parallel line, keep the given slope. For a perpendicular line, use its negative reciprocal. Then use the supplied point to find the starting height. Point-slope form is a way to write this immediately: measure every new point's across and upward changes from the supplied point. Those changes must follow the chosen slope. You can leave the answer in that form or expand it to y = mx + b.

    2 Picture it

    (0, −19)(3.17, 0)(4, 5)246−44812(0, −19)(3.17, 0)(4, 5)123456−44812
    y = 6x − 19, solid, beside y = −0.1667x + 5.6667, dashed.

    Reminder

    Reminder: Slope from two points, Negative reciprocal, Point-slope form, Distribution, Solving for the intercept, Multiplying signed numbers
    • Slope from two points. From (−2, 6) to (4, 5), run = 4 − (−2) = 6 and rise = 5 − 6 = −1.
    • Negative reciprocal. −16 becomes 6; their product is −1.
    • Point-slope form. Through (4, 5) at slope 6: y − 5 = 6(x − 4).
    • Distribution. 6(x − 4) = 6x − 24 because 6 multiplies both terms.
    • Solving for the intercept. 5 = 24 + b gives b = −19; plugging back gives 5 = 24 − 19.
    • Multiplying signed numbers. (−13) × (−3) = 1, so distributing the negative slope can produce a positive constant.

    3 Why

    If the line must pass through (x1, y1), its slope equation is m = y−y1x−x1 for other points with a different input. Multiplying gives y − y1 = m(x − x1). This equation also includes the supplied point because both changes are 0 there. It is point-slope form. Alternatively substitute that point in y = mx + b and solve for b. Both methods force the chosen slope and the required point to belong to one line.

    4 The rule

    Choose m equal to the given slope for a parallel line, or m=−1mgiven for a perpendicular line with nonzero finite given slope.

    Through (x1,y1), use y−y1=m(x−x1).

    The same idea, five ways

    Say it

    choose the direction, then anchor it at the supplied address.

    Write it

    One point and one slope determine one nonvertical line.

    In math
    • y−y1=m(x−x1)
    • b = y1 − mx1
    • parallel: m = mgiven
    • perpendicular: m = −1mgiven
    Like

    Slide a road with the correct direction until it passes through your house.

    See it
    (0, 4)(−1.33, 0)required point−224812
    y = 3x + 4, solid, beside y = 3x + 6, dashed, its point labelled “required point”.

    The same idea, other ways

    From changes

    Through (1, 7) at slope 3, every new rise y − 7 equals three times the new run x − 1. That gives y − 7 = 3(x − 1).

    y−7=3(x−1)

    rise from the point = slope × run from the point

    From the starting height

    Write y = 3x + b and insert (1, 7): 7 = 3 + b, so b = 4. Plug back in: 3 × 1 + 4 = 7.

    (0, 4)(−1.33, 0)found startrequired point224681012
    y = 3x + 4, solid, beside y = 3x + 6, dashed, its points labelled “found start” and “required point”.

    Part 1: Parallel through a point

    Keep the old line's slope, then adjust the starting height until the new line reaches the required address. If that address is already on the old line, this construction gives the old line itself; a distinct parallel line cannot pass through a point of the old line.

    • Rule: A parallel construction uses the same slope.
    • Rule: b = y1 − mx1 selects the intercept that fits the point.
    • Rule: Different intercepts are required for distinct parallel lines.
    (0, 4)(−1.33, 0)(1, 7)−224812
    y = 3x + 4, solid, beside y = 3x + 6, dashed, its point labelled “(1, 7)”.

    Reminder

    Reminder: Distribution, Substitution
    • Distribution. 3(x−1)=3x−3.
    • Substitution. The point (1, 7) means use x = 1 and y = 7 together.

    The same idea, five ways

    Say it

    keep the direction and find the starting height.

    Write it

    A parallel line through a point outside the given line has the same slope and a different intercept.

    In math
    • m = mgiven
    • y−y1=m(x−x1)
    Like

    Move a straight rail sideways without turning it.

    See it
    (0, 4)(−1.33, 0)(1, 7)−224812
    The same picture again: y = 3x + 4, solid, beside y = 3x + 6, dashed, its point labelled “(1, 7)”.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: the parallel answer through (1, 7) is y = 3x + 6.
    At x = 1 that equation gives 9, so it misses the required height 7.
    ✓ Instead: Keep slope 3, but solve for the new intercept 4.

    Tips and tricks

    • Same slope does not mean same intercept. Use the point to find the intercept.

    Part 2: Perpendicular through a point

    Turn the direction through a right angle, then use the address to position the turned line. For an ordinary nonzero slope, the direction change is flip and sign. The supplied point fixes the intercept after that change.

    • Rule: Use the negative reciprocal, then solve for the new intercept.
    • Rule: Perpendicular to y = c through (p, q) is x = p.
    • Rule: Perpendicular to x = c through (p, q) is y = q.
    (0, 1)(3, 0)−224−2246
    y = −0.3333x + 1, solid, beside y = 3x + 3, dashed.

    Reminder

    Reminder: Negative reciprocal, Signs
    • Negative reciprocal. 3 = 31 becomes −13.
    • Signs. (−13) × (−3) = 1 because two negative factors give a positive product.

    The same idea, five ways

    Say it

    turn the direction, then fit the address.

    Write it

    The new line makes a right angle and passes through the required point.

    In math
    • mnew = −1mgiven
    • y − y1 = mnew(x − x1)
    Like

    Turn a street into a cross street that passes through one location.

    See it
    (0, 1)(3, 0)−224−2246
    The same picture again: y = −0.3333x + 1, solid, beside y = 3x + 3, dashed.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: use slope −3 to be perpendicular to slope 3.
    The product is −9, not −1.
    ✓ Instead: Use slope −13, whose product with 3 is −1.

    Tips and tricks

    • Check the slope product and the point separately. Either condition can fail on its own.

    5 How

    1. Find the original slope from its equation or from two points.
    2. Choose the new slope: same for parallel, negative reciprocal for perpendicular.
    3. Insert the new slope and the required point in point-slope form, or use b = y1 − mx1.
    4. Expand and isolate y if slope-intercept form is wanted.
    5. Plug the supplied point into the final equation and check the slope relationship.

    Write the requested related line

    1
    Is the given line supplied by two points?
    YesCalculate its rise and run first. A zero run identifies a vertical line; zero rise with nonzero run identifies a horizontal line.
    NoRead its slope after isolating y, or recognize x = c as vertical.
    ↓
    2
    Is the given line horizontal or vertical?
    YesKeep its direction for parallel or swap directions for perpendicular, then set the required point's fixed coordinate. This completes the construction; do not take a reciprocal.
    NoContinue using the original finite nonzero slope.
    ↓
    3
    Is the requested nonvertical line parallel?
    YesKeep the original slope, then use the point to find b. Check for a different intercept if the line must be distinct.
    NoTake the negative reciprocal of the original slope, then use the point to find b.
    1. Find the given slope.
    2. Decide same direction or right-angle direction.
    3. Choose the new slope or the appropriate horizontal/vertical equation.
    4. Anchor the new line at the supplied point.
    5. Check the point and relationship in the original conditions.

    6 Worked example

    Worked example

    Lines through P(−4, −1) parallel and perpendicular to x + 2y = 6

    The graph shows the line x + 2y = 6, which crosses the axes at (0, 3) and (6, 0), and the point P(−4, −1), which is not on the line. (a) Write, in slope-intercept form, an equation of the line through P that is parallel to x + 2y = 6. (b) Write, in slope-intercept form, an equation of the line through P that is perpendicular to x + 2y = 6. Check each answer by substituting P and by comparing slopes.

    (0, 3)(6, 0)P(−4, −1)−8−448−448
    The given line x + 2y = 6, which is y = −12x + 3, crossing the axes at (0, 3) and (6, 0).
    Show the steps and the answer
    1. Find the given slope. Solve x+2y=6 for y. Subtract x from both sides to get 2y=−x+6. Divide every term by 2 to get y=−12x+3. So mgiven=−12. The marked points (0, 3) and (6, 0) agree: 0−36−0=−36=−12.In y = mx + b the coefficient of x is the slope, so the equation has to be solved for y first. Rise over run between any two points on the same line gives that same slope.
    2. Choose the new slopes. (a) Parallel: keep the same slope, so m=−12. (b) Perpendicular: m=−1mgiven=−1÷(−12)=2. The reciprocal of −12 is −2, and changing its sign gives 2. Test: (−12)(2)=−1.Parallel lines rise at the same rate, so they share a slope. Two lines with nonzero, finite slopes are perpendicular exactly when the product of their slopes is −1, and the negative reciprocal is the slope that makes that product −1.
    3. Insert each slope and P(−4,−1) into y−y1=m(x−x1). (a) y−(−1)=−12(x−(−4)), which is y+1=−12(x+4). (b) y−(−1)=2(x−(−4)), which is y+1=2(x+4).Point-slope form gives the line with slope m through (x1, y1) directly. Subtracting a negative coordinate is the same as adding, so y − (−1) becomes y + 1 and x − (−4) becomes x + 4.
    4. Expand and isolate y. (a) −12·x=−12x and −12·4=−2, so y+1=−12x−2. Subtract 1 to get y=−12x−3. (b) 2·x=2x and 2·4=8, so y+1=2x+8. Subtract 1 to get y=2x+7.Slope-intercept form is wanted. Distribute the slope over (x + 4), then subtract 1 from both sides so that y stands alone.
    5. Check with P and with the slopes. (a) −12(−4)−3=2−3=−1. The slope −12 matches the given line, and the y-intercept −3 differs from 3. (b) 2(−4)+7=−8+7=−1, and (−12)(2)=−1.Each new line must contain P, so x = −4 has to return y = −1. A parallel answer must keep the slope without being the same line. A perpendicular answer must give a slope product of −1.
    Answer
    (a) Parallel: y = −12x − 3. (b) Perpendicular: y = 2x + 7.
    Double-check Substitute P(−4, −1). For (a), −12(−4) − 3 = 2 − 3 = −1. For (b), 2(−4) + 7 = −8 + 7 = −1. So both lines pass through P. Line (a) has slope −12, the same as the given slope, and its y-intercept is −3 rather than 3, so it is parallel and is not the same line. Line (b) has slope 2, and (−12)(2) = −1, so it is perpendicular. The shortcut b = y1 − mx1 gives the same intercepts: (a) b = −1 − (−12)(−4) = −1 − 2 = −3, and (b) b = −1 − 2(−4) = −1 + 8 = 7. In standard form the answers are x + 2y = −6 and 2x − y = −7. P fits both: −4 + 2(−1) = −6 and 2(−4) − (−1) = −7.

    Work to write

    1. 2y = −x + 6, so y = −12x + 3 and mgiven = −12
    2. Parallel: m = −12
    3. Perpendicular: m = −1 ÷ (−12) = 2, since (−12)(2) = −1
    4. (a) y + 1 = −12(x + 4), so y = −12x − 3
    5. (b) y + 1 = 2(x + 4), so y = 2x + 7
    6. Check: −12(−4) − 3 = −1 and 2(−4) + 7 = −1

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 3

    Parallel with a fractional slope

    You need a line parallel to y = 23x − 1 through (3, 4).

    Show the steps and the answer
    (0, 2)(−3, 0)point−4−2246−448
    y = 0.6667x + 2, solid, beside y = 0.6667x − 1, dashed.
    1. Keep m=23 and write 4=23×3+b=2+b.The point must fit the new slope.
    2. Subtract 2: b=2. Plug back in: 23×3+2=4.This determines and verifies the starting output.
    3. Write y=23x+2.Same slope and different intercepts give the parallel relationship.
    Answer
    y=23x+2.
    Double-check Point-slope form y − 4 = 23(x − 3) expands to y = 23x + 2.

    Rung 2 of 3

    Perpendicular to a negative slope

    You need the perpendicular line to y = −25x + 4 through (2, −1).

    Show the steps and the answer
    (0, −6)(2.4, 0)point−4−2246−448
    y = 2.5x − 6, solid, beside y = −0.4x + 4, dashed.
    1. The negative reciprocal is 52. Substitute −1=52×2+b=5+b.A negative original slope gives a positive perpendicular slope.
    2. Subtract 5 to obtain b = −6. Plug back in: 5−6=−1.The required point selects and verifies the intercept.
    3. Write y=52x−6.The chosen direction is now positioned correctly.
    Answer
    y=52x−6.
    Double-check The slope product (−25) × 52 = −1, and point-slope form y + 1 = 52(x − 2) expands to the same result.

    Rung 3 of 3

    Horizontal and vertical exceptions

    You need the perpendicular line to y = 1 through (−4, 9), and the perpendicular line to x = 7 through that same point.

    Show the steps and the answer

    Given point: (−4, 9)

    Against y = 1: x = −4

    Against x = 7: y = 9

    1. Perpendicular to the horizontal y=1 is vertical. Through (−4,9), keep x fixed at −4.Horizontal and vertical directions make a square corner; no reciprocal of zero is needed.
    2. Perpendicular to the vertical x=7 is horizontal. Through (−4,9), keep y fixed at 9.The undefined vertical slope is handled by direction instead of division.
    3. Check the required point has x=−4 and y=9.Both constructed equations must contain that point.
    Answer
    • Perpendicular to y = 1: x = −4.
    • Perpendicular to x = 7: y = 9.
    Double-check The meeting points are (−4, 1) and (7, 9); each pair is horizontal against vertical, so each angle is 90°.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Counterexample: changing the slope to 6 while keeping the old intercept automatically makes the line pass through (4, 5).
    Slope controls direction, while the intercept controls placement. One condition does not ensure the other.
    ✓ Instead: Use b = 5 − 6 × 4 = −19 and verify 6 × 4 − 19 = 5.

    Tips and tricks

    • Underline the supplied point; it belongs to the requested line.
    • Use point-slope form to avoid losing the point while expanding.
    • If the point is on the old line and distinct parallel lines are requested, no such line exists; the same-slope construction is coincident.

    7 The trap

    Using the old slope in a perpendicular problem, or using the old intercept after changing the slope. Choose the direction first, then use the new point to find the new intercept.