Quarry School

Graphs of polynomial functions — quick review

Zeros from the factored form

In plain words

The big picture. Find where a polynomial meets the x-axis.

Rule

If f(x) = (x − c) · (other factors), then f(c) = 0: c is a zero of f, and the graph meets the x-axis at the point (c, 0). In factored form the zeros are exactly the inputs that make at least one factor 0, so x + c gives −c, a lone x gives 0, and a factor that is a nonzero number gives none.

Step

  1. Use the zero-product rule on f(x) = −2x(x + 4)(x − 1): a product is zero exactly when a factor is zero. This formula is already one product, so its factors can be solved separately.

  2. Skip −2: it is a number other than zero, so it can never make the product zero. Set the factors containing x equal to zero: x = 0, x + 4 = 0 and x − 1 = 0.

  3. Solve each equation by keeping both sides equal. Subtract 4 in x + 4 = 0 to get x = −4; add 1 in x − 1 = 0 to get x = 1. The lone x gives x = 0.

  4. Use the intercept rule: each real zero c gives the point (c, 0). List the distinct zeros −4, 0 and 1, and plot (−4, 0), (0, 0) and (1, 0). Every factor containing x has been used, so this list is complete.

  5. Check by substitution in the original product: f(−4) = −2 · (−4) · 0 · (−5) = 0, f(0) = −2 · 0 · 4 · (−1) = 0 and f(1) = −2 · 1 · 5 · 0 = 0. Each proposed zero makes a factor zero.

Strategy

  1. Write the formula as one product; factor any sums first.

  2. Set each factor that contains x equal to zero. A number on its own, such as −2, gives no zero.

  3. Solve each small equation, keeping every real solution.

  4. Substitute into the original formula. Write each distinct zero once, or each intercept as a point.

Strategy

  1. Look for a square minus a positive square.

  2. Split a difference of squares into a minus bracket and a plus bracket.

  3. Solve both brackets and every other factor that has an x.

  4. A square plus a positive number gives no real zero; check the remaining candidates.

Question

Find the t-intercepts of h(t) = 3t4 − 6t3 − 45t2.

Answer

h(t) = 3t2(t + 3)(t − 5)
t-intercepts: (−3, 0), (0, 0) and (5, 0)

Strategy

  1. Take out the largest number and power shared by every term.

  2. For the remaining trinomial, find two numbers whose product is the last coefficient and whose sum is the middle coefficient.

  3. Write the two brackets and set every factor that has the letter equal to zero.

  4. Solve and substitute into the original formula.

  5. Write each intercept as a point: (input, 0).

Strategy

  1. Group the terms into two pairs.

  2. Take out a common factor from each pair.

  3. Check that both remaining brackets match, including signs.

  4. Take out the shared bracket and factor any difference of squares.

  5. Solve every factor that has an x and substitute into the original sum.

Strategy

  1. Take out any common factor.

  2. Treat x squared as one temporary variable.

  3. Factor that quadratic, then replace the temporary variable with x squared.

  4. Solve each bracket. When x2 equals a positive number, x is its square root or the negative of it. When x2 equals a negative number, there is no real solution.

  5. Include zeros from the common factor and check them in the original formula.

Trap

Wrong: copy the sign inside a factor. Right: solve the factor equal to zero, then substitute to check.

Term

zero of a polynomial

Definition

An input that makes the polynomial's output equal 0. On the graph, it is a place where the curve meets the x-axis.

Multiplicity and what the graph does at a zero

In plain words

The big picture. Predict how a graph meets the x-axis at each zero.

Rule

Let c be a zero of a polynomial f that is not the constant 0. If the factor (x − c) appears exactly m times in the factored form of f(x), then c has multiplicity m. Odd m: the graph crosses the x-axis at x = c. Even m: the graph touches the x-axis at x = c and turns back. The larger m is, the flatter the graph lies near x = c.

Step

  1. Use the zero-product rule on f(x) = x(x − 3)2(x + 2)3. Solve x = 0, x − 3 = 0 and x + 2 = 0 to get the zeros 0, 3 and −2. These are the inputs where a factor becomes zero.

  2. Use the multiplicity rule: count how often each zero’s factor appears. The lone x counts once, (x − 3)2 counts twice and (x + 2)3 counts three times. Thus 0 has multiplicity 1, 3 has multiplicity 2 and −2 has multiplicity 3.

  3. Apply odd crosses and even touches. At 0, multiplicity 1 gives a crossing; at 3, multiplicity 2 gives a touch and turn; at −2, multiplicity 3 gives a flattened crossing. Odd powers change sign across a zero; even powers keep the same sign.

  4. Check the count using the product’s degree: x · x2 · x3 = x6, and 1 + 2 + 3 = 6. All factors here are powers of x − c, so their multiplicities account for the whole degree.

  5. Check the predicted crossings with signs on both sides, without passing another zero. Around −2, f(−3) = 108 and f(−1) = −16 have opposite signs. Around 0, f(−1) = −16 and f(1) = 108 have opposite signs. Around 3, f(2) = 128 and f(4) = 864 are both positive, which agrees with a touch and turn.

Question

What does the graph of f(x) = (x + 1)(x − 4) do at each zero?

Answer

x = −1: multiplicity 1, crosses at a slant.
x = 4: multiplicity 1, crosses at a slant.

Strategy

  1. Solve the factor equal to zero.

  2. Read its power and decide whether it is odd or even.

  3. State crossing or touch, with flattening when the power exceeds one.

  4. Check the outputs just to either side.

Strategy

  1. Solve the factor equal to zero.

  2. Read its power and decide whether it is odd or even.

  3. State crossing or touch, with flattening when the power exceeds one.

  4. Check the outputs just to either side.

Strategy

  1. Solve the factor equal to zero.

  2. Read its power and decide whether it is odd or even.

  3. State crossing or touch, with flattening when the power exceeds one.

  4. Check the outputs just to either side.

Strategy

  1. Find the distance of the input from the zero.

  2. Raise that same distance to each power.

  3. Compare the outputs without their signs; the smaller is nearer the axis.

  4. Use odd or even powers to decide crossing or touch.

Strategy

  1. Factor completely, including any bracket under a power.

  2. Set each factor that has an x equal to zero and solve.

  3. Add powers belonging to the same zero.

  4. Odd counts cross; even counts touch and turn. Counts above one flatten at the axis.

  5. Check signs close to each zero, without crossing another zero.

Strategy

  1. Factor every bracket, distributing any outside power to each factor.

  2. Collect all copies of the factor for the same zero.

  3. Add their exponents.

  4. An odd total crosses and an even total touches; then check the degree.

Strategy

  1. When every factor has the form x − c, the multiplicities add to the degree. A factor with no real zero, such as x2 + 4, also adds to the degree.

Trap

Wrong: cross at every zero. Right: cross at odd multiplicity and touch at even multiplicity.

Term

zero of a polynomial

Definition

An input that makes the polynomial's output equal 0. On the graph, it is a place where the curve meets the x-axis.

Term

multiplicity

Definition

The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.

The Intermediate Value Theorem

In plain words

The big picture. Locate a zero even when factoring is difficult.

Rule

Intermediate Value Theorem, zero version: let f be a polynomial and let a < b. If f(a) and f(b) have opposite signs, then there is at least one number c with a < c < b and f(c) = 0. General version: f takes every value between f(a) and f(b) at some input between a and b.

Step

  1. Check the Intermediate Value Theorem’s condition for f(x) = x3 + x − 3 on 1 ≤ x ≤ 2. It is a polynomial, so its graph is unbroken throughout this interval.

  2. Evaluate both endpoints by substitution: f(1) = 1 + 1 − 3 = −1 and f(2) = 8 + 2 − 3 = 7. These outputs put one endpoint below the axis and the other above it.

  3. Apply the theorem: the opposite signs guarantee at least one zero between 1 and 2. They do not identify an exact zero or prove there is only one.

  4. To narrow the interval to consecutive tenths, test f(1.1) = −0.569, f(1.2) = −0.072 and f(1.3) = 0.497. Apply the same sign-change rule to 1.2 and 1.3: at least one zero lies between them. Matching signs at 1.1 and 1.2 alone give no conclusion about that smaller interval.

  5. Check with the theorem’s general version: f(x) = 0 means x3 + x = 3. At 1.2, x3 + x = 2.928; at 1.3, it is 3.497. The unbroken graph reaches 3 between those inputs, confirming the same interval.

Strategy

  1. A sign change guarantees at least one zero. It does not give the exact zero, and it does not show there is only one.

Question

Let f(x) = x3 + x − 3.
(a) Show that f has a zero between 1 and 2.
(b) Find two tenths next to each other, such as 1.6 and 1.7, that the zero lies between.

Answer

(a) f(1) = −1 is negative and f(2) = 7 is positive, so f has at least one zero between 1 and 2.
(b) The zero is between 1.2 and 1.3.

Trap

Wrong: matching endpoint signs mean no zero. Right: matching signs give no conclusion.

Strategy

  1. Confirm the graph is unbroken throughout the interval; a polynomial is.

  2. Compute the output at each end. Work out a power before the minus sign in front of it.

  3. An output of zero gives an exact zero. Otherwise compare signs.

  4. Opposite signs guarantee at least one zero between the inputs; matching signs give no conclusion.

Strategy

  1. Read the table in increasing input order.

  2. Mark positive, negative or zero beside every output.

  3. Record each neighboring pair with opposite signs.

  4. Report exact zero entries separately; equal signs give no conclusion.

Strategy

  1. Start with two outputs of opposite signs.

  2. Choose an input inside the interval and evaluate it.

  3. If the output is zero, report that exact zero.

  4. Otherwise keep the smaller interval whose endpoint signs differ.

  5. Repeat to the requested precision and state the final interval.

Strategy

  1. Move the target to the left side and call that expression a new function.

  2. Check that the new function is a polynomial.

  3. Evaluate it at both endpoints.

  4. Opposite signs prove it has a zero, which solves the original equation.

Term

zero of a polynomial

Definition

An input that makes the polynomial's output equal 0. On the graph, it is a place where the curve meets the x-axis.

Term

multiplicity

Definition

The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.

Term

Intermediate Value Theorem

Definition

If a polynomial's output is negative at one input and positive at another, the output must be 0 somewhere between them, because the graph is one unbroken curve.

Sketching a polynomial from its features

In plain words

The big picture. Sketch a polynomial using its zeros, crossings, heights and ends.

Rule

For a polynomial f that is not constant, written in factored form: the zeros cut the x-axis into intervals, and on each interval f(x) keeps one sign, the sign of f at any test point inside it. At a zero of odd multiplicity the graph crosses the x-axis; at a zero of even multiplicity it touches and turns back. The y-intercept is (0, f(0)). The two arms follow the leading term.

Step

  1. Use the zero-product rule on f(x) = (x + 1)(x − 2)2. Solving x + 1 = 0 and x − 2 = 0 gives −1 and 2. Use the multiplicity rule to mark a crossing at (−1, 0) and a touch and turn at (2, 0): their powers are odd and even, respectively.

  2. Use the y-intercept rule, (0, f(0)): f(0) = (0 + 1)(0 − 2)2 = 4. Plot (0, 4), since every point on the y-axis has input zero.

  3. Use the leading-term rule to find both ends. Multiplying the leading pieces gives x · x2 = x3. Its odd degree and positive coefficient mean the left end goes down and the right end goes up.

  4. Use the interval-sign rule: once all real zeros are listed, one test input gives the sign on each interval. Compute f(−2) = −16, reuse f(0) = 4 and compute f(3) = 4. The graph is below the axis for x < −1 and above it for −1 < x < 2 and x > 2.

  5. Draw one smooth, unbroken curve through the marked points. Also plot f(1) = 2 to guide the middle. Cross at −1, pass through (0, 4) and (1, 2), touch at 2, then rise through (3, 4). The multiplicity and sign rules keep each stretch on the correct side.

  6. Check from right to left using the same rules. The right end is positive. Passing the even zero 2 keeps that sign; passing the odd zero −1 changes it to negative. These signs agree with the test values and the left end. Check that the sketch includes both intercepts and (0, 4).

Strategy

  1. A correct sketch changes sign only at an odd-multiplicity zero. Exact turning-point heights need more information.

Question

Sketch the graph of f(x) = (x + 1)(x − 2)2.

Answer

Zeros: x = −1 (multiplicity 1, crosses) and x = 2 (multiplicity 2, touches and turns back)
y-intercept: (0, 4)
Ends: left arm down, right arm up
Signs: below the x-axis for x < −1, above for −1 < x < 2, above for x > 2
Curve: rises from the lower left through (−2, −16), crosses at (−1, 0), passes through (0, 4) and (1, 2), touches (2, 0), and rises through (3, 4)

Trap

Wrong: switch sides at every zero. Right: switch at odd multiplicity and keep the side at even multiplicity.

Strategy

  1. Factor fully and list every real zero with its multiplicity.

  2. Add degrees and multiply leading coefficients to determine both ends.

  3. Compute the y-intercept by setting x equal to zero.

  4. Choose one test input in every interval cut out by the zeros.

  5. Mark crosses, touches and known heights; connect them smoothly.

  6. Check each interval’s sign and both ends against the drawing.

Strategy

  1. Pull out any common factor.

  2. Factor the remaining sum by grouping or a quadratic pattern.

  3. Solve the factors and combine repeated zeros.

  4. Use the sketch plan: ends, intercepts, interval signs, then a smooth curve.

Term

multiplicity

Definition

The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.

Term

Intermediate Value Theorem

Definition

If a polynomial's output is negative at one input and positive at another, the output must be 0 somewhere between them, because the graph is one unbroken curve.

Writing a formula from a graph

In plain words

The big picture. Build a polynomial formula from a graph.

Rule

If all of a polynomial's zeros are real, at c1, c2, ... with multiplicities m1, m2, ..., so the graph shows every one, then f(x) = a(x − c1)m1(x − c2)m2··· with a ≠ 0. Lowest multiplicity that fits: a straight crossing is 1, a touch and turn is 2, a flattened crossing is 3. To find a, substitute one point (x0, y0) that is not on the x-axis and solve the equation for a.

Step

  1. Read the example’s zeros and behavior: it crosses straight through at −2 and touches and turns at 1. Use the rule’s smallest fitting multiplicities, 1 and 2, because the question asks for the lowest degree.

  2. Use the factor rule: a zero c supplies x − c. Write f(x) = a(x + 2)(x − 1)2. The factors place the zeros, their powers give the required behavior, and a scales the other heights.

  3. Use the point (0, 4) to find a. Substitute both coordinates: 4 = a(0 + 2)(0 − 1)2 = 2a. A point off the x-axis makes the factor product nonzero, so it determines a.

  4. Divide both sides by 2 to keep the equation balanced: a = 2. Write f(x) = 2(x + 2)(x − 1)2. Its degree is 1 + 2 = 3, the lowest allowed by the crossing and touch.

  5. Check the saved point: f(2) = 2 · 4 · 1 = 8, matching (2, 8). The factors give zeros −2 and 1 with the required behavior. The leading term 2x3 gives a left end down and a right end up, so both ends agree too.

Strategy

  1. Read each zero and whether the graph crosses, touches or crosses flat.

  2. For the lowest degree, choose powers one, two or three respectively, unless other facts require more.

  3. Write one factor for each zero, raised to its power, and put a in front.

  4. Substitute an exact point off the x-axis and solve for a.

  5. Check another given point, the degree and both ends.

Question

A polynomial has degree 4. It has a double zero at x = 3 and zeros of multiplicity 1 at x = −2 and x = 1. Its y-intercept is (0, −6). Write its formula.

Answer

f(x)=13(x−3)2(x+2)(x−1)

Strategy

  1. Turn each stated zero into a factor and use its multiplicity as the power.

  2. Add the powers and compare with the stated degree.

  3. Multiply the factors with an unknown a in front.

  4. Substitute the extra point, evaluate the product and divide to find a.

  5. Check the point, zeros and degree in the finished formula.

Strategy

  1. Write a factor that becomes zero at each stated root.

  2. Keep its required power and put a before the product.

  3. Use the exact supplied point, even if its input is not zero.

  4. Evaluate the factors as fractions and divide to find a.

  5. Check the full product; rescaled factors require a different a.

Trap

Wrong: stop at the factors and assume the scale is one. Right: use a point off the x-axis to solve for the scale.

Strategy

  1. Recheck the coordinates and arithmetic. Then adjust only powers the graph leaves open and solve for the scale again. Raising a power by two keeps the degree even or odd, so it cannot fix ends that point the wrong way.

Term

multiplicity

Definition

The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.

Largest and smallest values on an interval

In plain words

The big picture. Find the largest and smallest outputs on an allowed interval.

Rule

On a closed interval a ≤ x ≤ b, a polynomial always has a global maximum and a global minimum. Each one sits at a local maximum or local minimum inside the interval, or at an endpoint (x = a or x = b). The maximum or minimum is the output, the y-value. The place where it happens is the input, the x-value.

Step

  1. Use the closed-interval rule on f(x) = x3 − 12x for −3 ≤ x ≤ 5. Both endpoints are included, so compare them with every interior local maximum and minimum. These are the possible places for a global extreme value.

  2. Read the marked hilltop (−2, 16) and valley (2, −16) in the example. By the local-extreme rule, a hilltop is highest nearby and a valley is lowest nearby. A table alone cannot prove that no turning point lies between its samples; use the marked features and the formula check below.

  3. Evaluate all four candidates by substitution: f(−3) = −27 + 36 = 9, f(−2) = −8 + 24 = 16, f(2) = 8 − 24 = −16 and f(5) = 125 − 60 = 65. The rule compares outputs, so keep each height paired with its input.

  4. Compare the heights: 65 > 16 > 9 > −16. The local maximum is 16 at x = −2 and the local minimum is −16 at x = 2. The global maximum is 65 at x = 5; the global minimum is −16 at x = 2.

  5. Check the bounds over the whole interval using the example’s factorizations. Since x + 4 is positive there and a square is never negative, f(x) + 16 = (x − 2)2(x + 4) ≥ 0. Thus f(x) ≥ −16. Also 65 − f(x) = (5 − x)(x2 + 5x + 13) ≥ 0: the first factor is never negative, and the second equals (x + 2.5)2 + 6.75, which is positive. Thus f(x) ≤ 65. Substitution shows both bounds are reached. Near −2, 16 − f(x) = (x + 2)2(4 − x) ≥ 0, confirming the local maximum.

Strategy

  1. On an interval that includes both ends, a polynomial reaches a largest and a smallest value. When an end is left out, the graph can come close to a height there without reaching it.

Question

The graph shows g(x) = −(x − 1)2 + 4. Name its local maximum.

Answer

Local maximum: 4, at x = 1

Strategy

  1. Trace the graph inside the interval.

  2. Find where rising changes to falling.

  3. Read the output and its input.

  4. Check heights on both sides of the point.

Strategy

  1. Trace the graph inside the interval.

  2. Find where falling changes to rising.

  3. Read the output and its input.

  4. Check heights on both sides of the point.

Strategy

  1. Mark the allowed interval and which endpoints are included.

  2. Read every hilltop and valley inside the interval from the graph.

  3. Evaluate those points and the included endpoints.

  4. Compare the heights; report ties at every input that reaches the winning height.

  5. For excluded endpoints, check approached heights before claiming a maximum or minimum.

  6. State each answer as an output value and the input where it occurs.

Strategy

  1. Mark the allowed interval and which endpoints are included.

  2. Read every hilltop and valley inside the interval from the graph.

  3. Evaluate those points and the included endpoints.

  4. Compare the heights; report ties at every input that reaches the winning height.

  5. For excluded endpoints, check approached heights before claiming a maximum or minimum.

  6. State each answer as an output value and the input where it occurs.

Strategy

  1. Name the square cut x; it becomes the height.

  2. Subtract twice x from each original edge to get the base dimensions.

  3. Multiply the three dimensions for volume.

  4. Require every dimension to be positive to find the cut interval.

  5. Substitute the requested cut and report volume in cubic units.

Strategy

  1. Build the volume formula and its physical interval.

  2. Keep only the cuts that also meet any tool or size limit in the question.

  3. Read the peaks inside the allowed interval from the graph or the given data, and evaluate the included ends.

  4. Compare allowed candidates and check the curve between them.

  5. Report both the cut length and the greatest volume.

Trap

Wrong: choose the highest hill and ignore the ends. Right: compare every hilltop and valley inside the interval with every included end.

Term

multiplicity

Definition

The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.

Term

local maximum

Definition

The height of a point that is at least as high as every point close to it: the top of a hill on the graph, read as a y-value. Parts of the graph farther away may still be higher.

Term

local minimum

Definition

The height of a point that is at least as low as every point close to it: the bottom of a valley on the graph, read as a y-value. Parts of the graph farther away may still be lower.

Term

global maximum

Definition

The largest output on the whole graph, or on the whole stated interval. No point anywhere is higher. Some graphs have none, because an arm rises without end.

Term

global minimum

Definition

The smallest output on the whole graph, or on the whole stated interval. No point anywhere is lower. Some graphs have none, because an arm falls without end.