Quarry School

Graphs of polynomial functions

Subject: MathematicsLevel 1 · estimated

The big picture. Connect polynomial formulas to the shapes of their graphs. Zeros, repeated factors and output signs explain where a curve meets the axis and which side it uses. Work from a formula to a sketch, then from graph features back to a formula. Finish by finding the largest and smallest outputs on an allowed interval.

Zeros from the factored form: solve each factor to find the x-intercepts.

Multiplicity and what the graph does at a zero: use factor counts to predict crossings and touches.

The Intermediate Value Theorem: use opposite output signs to locate and narrow an interval containing a zero.

Sketching a polynomial from its features: combine zeros, multiplicities, intercepts, ends and interval signs.

Writing a formula from a graph: turn zeros into factors and use another point to find the scale.

Largest and smallest values on an interval: compare interior high and low points with included endpoints.

Use these methods to solve polynomial equations by factoring, locate zeros from a table, sketch and match graphs, build lowest-degree formulas, and compare local and global extreme values, including box volumes on a restricted interval.

Lessons

Quick review

Read the whole unit on one page

  1. Zeros from the factored formSubject: MathematicsLeans on: Zero times anythingLeans on: Solving a linear equationLeans on: Plugging in a negative numberLeans on: Powers of a negative numberLeans on: Multiplying two bracketsLeans on: Difference of squaresLeans on: Factoring by groupingLeans on: A square is never negativeLeans on: Factoring x² + bx + cLeans on: Square rootsLevel 1 · Foundations
  2. Multiplicity and what the graph does at a zeroSubject: MathematicsLeans on: Zeros from the factored formLeans on: Sign of a productLeans on: Odd and even numbersLeans on: Powers of numbers between 0 and 1Leans on: Adding exponentsLeans on: Difference of squaresLeans on: Perfect square trinomialLevel 1 · Foundations
  3. The Intermediate Value TheoremSubject: MathematicsLeans on: Evaluating a polynomialLeans on: Powers of a negative numberLeans on: Cubing a decimalLeans on: Zero of a polynomialLeans on: Sign and positionLeans on: Multiplicity at a zeroLevel 1 · Foundations
  4. Sketching a polynomial from its featuresSubject: MathematicsLeans on: Zeros from the factored formLeans on: MultiplicityLeans on: The y-interceptLeans on: End behavior from the leading termLeans on: Sign of a productLeans on: Powers of a negative numberLeans on: Order of operationsLeans on: Intermediate Value TheoremLevel 1 · Foundations
  5. Writing a formula from a graphSubject: MathematicsLeans on: Zeros from the factored formLeans on: Multiplicity and the graphLeans on: Powers of a negative numberLeans on: Powers before multiplyingLeans on: Solving for one letterLeans on: End behavior from the leading termLevel 1 · Foundations
  6. Largest and smallest values on an intervalSubject: MathematicsLeans on: Rising and fallingLeans on: Powers and products of negative numbersLeans on: Comparing negative numbersLeans on: Closed and open intervalsLeans on: Volume of a boxLeans on: Solving a linear inequalityLeans on: End behaviorLeans on: A square is never negativeLeans on: MultiplicityLevel 1 · Foundations

Vocabulary

zero of a polynomial
An input that makes the polynomial's output equal 0. On the graph, it is a place where the curve meets the x-axis.
multiplicity
The number of times the same factor appears in the factored form: the exponent on that factor. It decides whether the graph crosses the x-axis or only touches it.
Intermediate Value Theorem
If a polynomial's output is negative at one input and positive at another, the output must be 0 somewhere between them, because the graph is one unbroken curve.
local maximum
The height of a point that is at least as high as every point close to it: the top of a hill on the graph, read as a y-value. Parts of the graph farther away may still be higher.
local minimum
The height of a point that is at least as low as every point close to it: the bottom of a valley on the graph, read as a y-value. Parts of the graph farther away may still be lower.
global maximum
The largest output on the whole graph, or on the whole stated interval. No point anywhere is higher. Some graphs have none, because an arm rises without end.
global minimum
The smallest output on the whole graph, or on the whole stated interval. No point anywhere is lower. Some graphs have none, because an arm falls without end.

Quick checks

Quick check 1 of 8

What are the zeros of f(x) = (x − 4)(x + 7)?

Show the steps and the answer
Answer
x = 4 and x = −7. Each factor is 0 there: 4 − 4 = 0 and −7 + 7 = 0.

Quick check 2 of 8

For f(x) = (x + 1)3(x − 5)2, what does the graph do at each zero?

Show the steps and the answer
Answer
  • At x = −1 it crosses the x-axis, flattening as it passes, because the multiplicity 3 is odd and greater than 1.
  • At x = 5 it touches the x-axis and turns back, because the multiplicity 2 is even.

Quick check 3 of 8

g(x) = x3 + x − 1 has g(0) = −1 and g(1) = 1. What does the Intermediate Value Theorem tell you?

Show the steps and the answer
Answer
There is a zero between 0 and 1. The output changes sign, and a polynomial's graph has no breaks, so it must pass through 0.

Quick check 4 of 8

A polynomial has f(1) = 3 and f(4) = 7. Does that prove there is no zero between 1 and 4?

Show the steps and the answer
Answer
No. With no sign change the theorem says nothing. Between 1 and 4 the graph could dip below the axis and come back, or touch the axis and turn.

Quick check 5 of 8

A graph touches the x-axis at x = −2, crosses it at x = 1, and has y-intercept (0, −8). Write the formula of lowest degree.

Show the steps and the answer
Answer
  • f(x) = 2(x + 2)2(x − 1). Start with a(x + 2)2(x − 1) and plug in (0, −8): a
  • 4
  • (−1) = −8, so −4a = −8 and a = 2.

Quick check 6 of 8

Which way do the arms of f(x) = −3(x − 1)2(x + 2)2 point?

Show the steps and the answer
Answer
  • Both arms point down. The leading term is −3
  • x2
  • x2 = −3x4: even degree, negative leading coefficient.

Quick check 7 of 8

Squares of side x cm are cut from the corners of a 10 cm by 10 cm sheet, and the flaps are folded up into an open box. Write the volume and the inputs that make sense.

Show the steps and the answer
Answer
V(x) = x(10 − 2x)2, for 0 < x < 5. The height is x, each side of the base is 10 − 2x, and the base must stay positive.

Quick check 8 of 8

On the interval −1 ≤ x ≤ 3, a graph starts at (−1, 2), has one hilltop at (0, 5) and ends at the point (3, 9). What is the global maximum on the interval?

Show the steps and the answer
Answer
9, at x = 3. Of the left end 2, the hilltop 5 and the right end 9, the right end is highest, so the hilltop at (0, 5) is only a local maximum.

Before you start

  • Factoring by grouping and special products

    Factoring means rewriting a sum as a multiplication. It is multiplying run backward: instead of asking what 3 × 4 makes, you ask which numbers multiply to make 12. Grouping is a way to factor four terms: split them into two pairs, pull the shared piece out of each pair, then pull out the bracket that both pairs share. Two patterns, called special products, are worth knowing on sight. A difference of squares, a2 − b2, factors as (a − b)(a + b). A perfect square trinomial, a2 + 2ab + b2, factors as (a + b)2.

  • End behavior from the leading term

    End behavior is what the graph does far out on the left and far out on the right: for a polynomial that is not constant, whether each arm points up or down. You do not need the whole formula to know. The leading term, the term with the highest power of x, decides it alone. Think of a tug of war between an elephant and a few mice: when x is large, the highest power is the elephant and every other term is a mouse. Two facts about the leading term settle everything: whether its power (the degree) is even or odd, and whether the number in front (the leading coefficient) is positive or negative.

  • Sign of a product

    Often you need to know only whether an answer is positive or negative, not its size. For a product, you can tell by counting. Each negative factor flips the sign once, like a light switch: flip once and the light is off, flip twice and it is on again. So an even number of negative factors gives a positive product, and an odd number gives a negative product. Positive factors never flip anything, and a single zero factor makes the whole product 0. This is how you will tell, without heavy arithmetic, whether a polynomial's graph is above or below the x-axis.

Sources

  1. Jay Abramson. Precalculus 2e, 3.4 Graphs of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026. Cited in Multiplicity and what the graph does at a zero, The Intermediate Value Theorem, Writing a formula from a graph.
  2. Gilbert Strang and Edwin Herman. Calculus Volume 1, 4.3 Maxima and Minima. OpenStax, 2016. CC BY-NC-SA 4.0. Read 16 Nov 2026. Cited in Largest and smallest values on an interval.