Quarry School

Zeros from the factored form

Subject: MathematicsLeans on: Zero times anythingLeans on: Solving a linear equationLeans on: Plugging in a negative numberLeans on: Powers of a negative numberLeans on: Multiplying two bracketsLeans on: Difference of squaresLeans on: Factoring by groupingLeans on: A square is never negativeLeans on: Factoring x² + bx + cLeans on: Square roots
Level 1 · FoundationsAbout 32 min read3 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    The big picture. Find where a polynomial meets the x-axis.

    Rule

    If f(x) = (x − c) · (other factors), then f(c) = 0: c is a zero of f, and the graph meets the x-axis at the point (c, 0). In factored form the zeros are exactly the inputs that make at least one factor 0, so x + c gives −c, a lone x gives 0, and a factor that is a nonzero number gives none.

    Step

    1. Use the zero-product rule on f(x) = −2x(x + 4)(x − 1): a product is zero exactly when a factor is zero. This formula is already one product, so its factors can be solved separately.

    2. Skip −2: it is a number other than zero, so it can never make the product zero. Set the factors containing x equal to zero: x = 0, x + 4 = 0 and x − 1 = 0.

    3. Solve each equation by keeping both sides equal. Subtract 4 in x + 4 = 0 to get x = −4; add 1 in x − 1 = 0 to get x = 1. The lone x gives x = 0.

    4. Use the intercept rule: each real zero c gives the point (c, 0). List the distinct zeros −4, 0 and 1, and plot (−4, 0), (0, 0) and (1, 0). Every factor containing x has been used, so this list is complete.

    5. Check by substitution in the original product: f(−4) = −2 · (−4) · 0 · (−5) = 0, f(0) = −2 · 0 · 4 · (−1) = 0 and f(1) = −2 · 1 · 5 · 0 = 0. Each proposed zero makes a factor zero.

    Strategy

    1. Write the formula as one product; factor any sums first.

    2. Set each factor that contains x equal to zero. A number on its own, such as −2, gives no zero.

    3. Solve each small equation, keeping every real solution.

    4. Substitute into the original formula. Write each distinct zero once, or each intercept as a point.

    Strategy

    1. Look for a square minus a positive square.

    2. Split a difference of squares into a minus bracket and a plus bracket.

    3. Solve both brackets and every other factor that has an x.

    4. A square plus a positive number gives no real zero; check the remaining candidates.

    Question

    Find the t-intercepts of h(t) = 3t4 − 6t3 − 45t2.

    Answer

    h(t) = 3t2(t + 3)(t − 5)
    t-intercepts: (−3, 0), (0, 0) and (5, 0)

    Strategy

    1. Take out the largest number and power shared by every term.

    2. For the remaining trinomial, find two numbers whose product is the last coefficient and whose sum is the middle coefficient.

    3. Write the two brackets and set every factor that has the letter equal to zero.

    4. Solve and substitute into the original formula.

    5. Write each intercept as a point: (input, 0).

    Strategy

    1. Group the terms into two pairs.

    2. Take out a common factor from each pair.

    3. Check that both remaining brackets match, including signs.

    4. Take out the shared bracket and factor any difference of squares.

    5. Solve every factor that has an x and substitute into the original sum.

    Strategy

    1. Take out any common factor.

    2. Treat x squared as one temporary variable.

    3. Factor that quadratic, then replace the temporary variable with x squared.

    4. Solve each bracket. When x2 equals a positive number, x is its square root or the negative of it. When x2 equals a negative number, there is no real solution.

    5. Include zeros from the common factor and check them in the original formula.

    Trap

    Wrong: copy the sign inside a factor. Right: solve the factor equal to zero, then substitute to check.

    Term

    zero of a polynomial

    Definition

    An input that makes the polynomial's output equal 0. On the graph, it is a place where the curve meets the x-axis.

    1 In plain words

    The big picture. Find where a polynomial meets the x-axis. Use the factoring you already know: a product is zero when a factor is zero. Solve each factor to find those inputs. Next, repeated factors tell you how the graph meets the axis.

    Think of lights wired in one string: one failed bulb turns the whole string off. One zero factor makes a whole product zero. Factored form writes a polynomial as multiplied pieces called factors. In f(x) = (x − 3)(x + 2), either bracket can make the output zero. Such an input is a zero. On the graph, each real zero marks a meeting with the x-axis.

    2 Picture it

    (−2, 0)(3, 0)−4−224−448(−2, 0)(3, 0)−4−3−2−112345−448
    The graph of f(x) = (x − 3)(x + 2) meets the x-axis at x = −2 and x = 3, the two inputs that make a factor 0.

    Reminder

    Reminder: Zero times anything, Solving a linear equation, Plugging in a negative number, Powers of a negative number, Multiplying two brackets, Difference of squares, Factoring by grouping, A square is never negative, Factoring x2 + bx + c, Square roots
    • Zero times anything. A product with a 0 in it is 0: 7 × 0 = 0 and (−4) × 0 × 12 = 0.
    • Solving a linear equation. Do the same thing to both sides to undo each step: 2x − 5 = 0, add 5 to get 2x = 5, divide by 2 to get x = 52.
    • Plugging in a negative number. Wrap it in parentheses first: at x = −4, x + 4 = (−4) + 4 = 0 and x − 1 = (−4) − 1 = −5.
    • Powers of a negative number. An even power comes out positive and an odd power negative: (−4)2 = 16 and (−4)3 = −64.
    • Multiplying two brackets. Multiply each term of the first by each term of the second: (x + 4)(x − 1) = x2 − x + 4x − 4 = x2 + 3x − 4.
    • Difference of squares. a2 − b2 = (a − b)(a + b), so x2 − 25 = (x − 5)(x + 5). It needs a minus between the squares; x2 + 25 does not split this way.
    • Factoring by grouping. Pull a common factor from each pair, then pull out the shared bracket: x3 + 5x2 − x − 5 = x2(x + 5) − 1(x + 5) = (x2 − 1)(x + 5).
    • A square is never negative. 32 = 9, (−3)2 = 9 and 02 = 0, so x2 is 0 or more and x2 + 1 is 1 or more.
    • Factoring x2 + bx + c. Find two numbers that multiply to c and add to b: x2 + 7x + 12 = (x + 3)(x + 4), because 3 · 4 = 12 and 3 + 4 = 7.
    • Square roots. 9 = 3 because 3 · 3 = 9. When the number is not a perfect square, keep the sign: 5 · 5 = 5, and 5 is about 2.236.

    3 Why

    At x = 3, the factor x − 3 is zero, so f(3) = 0 × 5 = 0. Two nonzero numbers cannot multiply to zero. Therefore a product equals zero exactly when at least one factor equals zero. Solving each factor finds every zero of the product.

    4 The rule

    If f(x)=(x−c)· (other factors), then f(c)=0: c is a zero of f, and the graph meets the x-axis at the point (c, 0).

    In factored form the zeros are exactly the inputs that make at least one factor 0, so x+c gives −c, a lone x gives 0, and a factor that is a nonzero number gives none.

    The same idea, five ways

    Say it

    3 is a zero of f. Or say: f of 3 is 0. Both mean that putting 3 in gives 0 out.

    Write it

    A number c is a zero of a polynomial f when f(c) = 0. Every factor (x − c) in the factored form of f makes c a zero.

    In math
    • f(c) = 0
    • f(3) = 0 and f(−2) = 0 for f(x) = (x − 3)(x + 2)
    • the point (c, 0) on the graph, an x-intercept
    • the zeros of f: x = −2 or x = 3
    • {x | f(x) = 0}, the set of all the zeros
    Like

    Like the spots where a roller coaster track passes ground level on its way into or out of a tunnel: the height of the track there is exactly 0.

    See it
    3f(x) = (x − 3)(x +2)inputoutput0
    A zero is an input the machine turns into 0: 3 goes in, and (3 − 3)(3 + 2) = 0 × 5 = 0 comes out.

    The same idea, other ways

    As a picture

    Draw each factor as its own line. The line y = x − 3 is at height 0 when x is 3, and the line y = x + 2 is at height 0 when x is −2. The product f(x) = (x − 3)(x + 2) multiplies the two heights, so it is 0 at both spots. Anywhere else both heights are not 0, so their product is not 0 either.

    x = 3x = −2−4−224−8−448
    Each factor is 0 at its own spot: the solid line y = x − 3 at x = 3, the dashed line y = x + 2 at x = −2.
    With small numbers

    Work out f(x) = (x − 3)(x + 2) for the inputs −3 through 4 and read along the output row of the table. It holds a 0 in exactly two columns, the ones under −2 and 3. In every other column neither factor is 0, so the output is not 0.

    input xoutput f(x)−36−20−1−40−61−62−43046↑ solve: output given, read every input above it
    The two 0s in the output row sit under −2 and 3, the inputs that make a factor 0.
    As a story

    A rectangle's area is its length times its width. Squash one side down to nothing and the area is gone, however long the other side is. Any product of two numbers behaves the same way, negative numbers included: if either number is 0, so is the product. Take the factors (x − 3) and (x + 2). At x = 3 the first factor is 0, and at x = −2 the second one is. Either way the product is 0.

    (x − 3)(x + 2)x − 3x + 2
    For x above 3 both factors are positive and the product is this rectangle's area; a side of 0 leaves no area.
    Why it must be true

    Zero times any number is 0, so each factor (x − c) makes f(c) = 0. And two numbers that are both not 0 never multiply to 0 (3 × 5 = 15, −2 × 0.5 = −1), so any input that makes f equal 0 must make some factor 0. Together these say the factors show every zero and nothing else.

    0 × any number = 0

    3 × 5 = 15, not 0

    a · b = 0 means a = 0 or b = 0

    (x − 3)(x + 2) = 0 means x = 3 or x = −2

    Rule of thumb

    Ask each factor: what number makes you 0? For x − c the answer is c, for x + c it is −c, and for a lone x it is 0. A factor that is a nonzero number, such as 7, never answers. When x has a number in front, such as 2x − 5, solve the small equation instead of reading the number off.

    x − 3 gives 3

    x + 2 gives −2

    x gives 0

    2x − 5 gives 52

    7 gives no zero

    FactorSet it equal to 0 and solveZero it gives
    x−3x − 3 = 0, add 3 to both sidesx = 3
    x + 2x + 2 = 0, subtract 2 from both sidesx=−2
    xx = 0 alreadyx = 0
    2x−52x − 5 = 0, so 2x = 5, then divide by 2x=52
    7, only a number7 is never 0none
    x2+4x2 = −4, and no real number squares to a negativenone

    Part 1: Zeros of a product

    What it asks: Find zeros or intercepts from a factored formula.

    The plan

    1. Write the formula as one product; factor any sums first.
    2. Set each factor that contains x equal to zero. A number on its own, such as −2, gives no zero.
    3. Solve each small equation, keeping every real solution.
    4. Substitute into the original formula. Write each distinct zero once, or each intercept as a point.

    f(x)=−2x(x+4)(x−1)

    −2: only a number, no zero

    x: gives x = 0

    x + 4: gives x = −4

    x − 1: gives x = 1

    Tips and tricks

    • Trap: A nonzero number outside the factors is not a zero.
    • Trick: Solve a factor such as x + 4 = 0 before reading its sign: its zero is −4, not 4.

    Part 2: A difference of squares or a sum of squares

    What it asks: Decide which quadratic factors give real zeros.

    The plan

    1. Look for a square minus a positive square.
    2. Split a difference of squares into a minus bracket and a plus bracket.
    3. Solve both brackets and every other factor that has an x.
    4. A square plus a positive number gives no real zero; check the remaining candidates.

    q(x)=(x−2)(x2−49)

    x2−49=(x−7)(x+7)

    x − 2 gives 2

    x − 7 gives 7

    x + 7 gives −7

    Tips and tricks

    • Trap: Treating a sum of positive squares as a difference creates false real zeros.
    • Trick: Set the squared quantity equal to the number first; its sign decides whether real roots exist.

    Part 3: Pull out what every term shares, then split the trinomial

    What it asks: Find intercepts when all terms share a factor.

    Divide each term by the common factor. The remaining quadratic has three terms, so it is a trinomial. Its two bracket constants must have the right product and sum. The same method works with t or x.

    • Why the common factor comes out: 3t2 · t2 = 3t4, 3t2 · (−2t) = −6t3 and 3t2 · (−15) = −45t2. Multiplying back gives the three terms you started with.
    • Why the two numbers work: (t + p)(t + q) = t2 + (p + q)t + pq. The middle number is the sum p + q, and the last number is the product pq.
    • Rule: x2 + bx + c = (x + p)(x + q) when p · q = c and p + q = b.
    • Signs: when c is negative, the two numbers have opposite signs. When c is positive, both carry the sign of b.
    • An intercept is a point, so write both coordinates: the zero 5 gives the point (5, 0).

    The plan

    1. Take out the largest number and power shared by every term.
    2. For the remaining trinomial, find two numbers whose product is the last coefficient and whose sum is the middle coefficient.
    3. Write the two brackets and set every factor that has the letter equal to zero.
    4. Solve and substitute into the original formula.
    5. Write each intercept as a point: (input, 0).

    3t4−6t3−45t2

    =3t2(t2−2t−15)

    Pairs that multiply to −15: 1 and −15, −1 and 15, 3 and −5, −3 and 5

    3+(−5)=−2

    =3t2(t+3)(t−5)

    Worked example

    A common factor, then a trinomial

    Find the t-intercepts of h(t) = 3t4 − 6t3 − 45t2.

    What it asks. Find the horizontal-axis intercepts as points.

    Show the steps and the answer

    The plan. Take out the common factor, split the trinomial, solve each factor and check.

    input toutput h(t)−4432−30−1−36001−48506972↑ solve: output given, read every input above it
    The three 0s in the output row sit under −3, 0 and 5.
    1. Plan. Take out the common factor, split the trinomial, solve each factor and check.
    2. Every term can be divided by the same number and by the same power of t. Take that out in front first.
    3. For the trinomial left in the bracket, look for two numbers that multiply to −15 and add to −2.
    1. Look for what every term shares. The numbers 3, −6 and −45 can all be divided by 3. The powers t4,t3 and t2 all hold at least t2. So the common factor is 3t2.A common factor is a piece that divides every term. Taking it out leaves a shorter formula to factor.
    2. Pull it out: h(t)=3t2(t2−2t−15).Each term is divided by 3t2: 3t4 ÷ 3t2 = t2, −6t3 ÷ 3t2 = −2t and −45t2 ÷ 3t2 = −15. Multiply back to be sure: 3t2 · t2 = 3t4, 3t2 · (−2t) = −6t3, 3t2 · (−15) = −45t2.
    3. Factor t2−2t−15. Find two numbers that multiply to −15 and add to −2. The pairs that multiply to −15 are 1 and −15,−1 and 15, 3 and −5,−3 and 5. Their sums are −14, 14, −2 and 2. The pair 3 and −5 adds to −2.(t + p)(t + q) multiplies out to t2 + (p + q)t + pq, so the two numbers must add to the middle number and multiply to the last number.
    4. Write the brackets: t2−2t−15=(t+3)(t−5). So h(t)=3t2(t+3)(t−5).Multiply back: t2 − 5t + 3t − 15 = t2 − 2t − 15.
    5. Set each factor that holds t equal to 0. t2=0 gives t=0. t+3=0 gives t=−3. t−5=0 gives t=5. The 3 in front gives no zero.A product is 0 only when one of its factors is 0, and the number 3 is never 0.
    6. Write each zero as a point on the horizontal axis: (−3,0), (0, 0) and (5, 0).An intercept is a point of the graph. Its second coordinate is 0 because the output there is 0.
    Answer
    • h(t)=3t2(t+3)(t−5)
    • t-intercepts: (−3, 0), (0, 0) and (5, 0)
    Double-check Plug each zero into the original formula. h(−3) = 3(81) − 6(−27) − 45(9) = 243 + 162 − 405 = 0. h(0) = 0 − 0 − 0 = 0. h(5) = 3(625) − 6(125) − 45(25) = 1875 − 750 − 1125 = 0. An input that is not on the list gives another output: h(1) = 3 − 6 − 45 = −48.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: t2 − 2t − 15 = (t − 3)(t + 5), because 3 · 5 = 15.
    Multiply back: (t − 3)(t + 5) = t2 + 2t − 15. The middle term has the wrong sign, because −3 + 5 = 2, not −2.
    ✓ Instead: The pair must add to −2, so the larger number carries the minus sign: 3 and −5. t2 − 2t − 15 = (t + 3)(t − 5).
    ✗ Not this: After pulling out 3t2, the zeros of h(t) = 3t2(t + 3)(t − 5) are only −3 and 5.
    The t2 in front is a factor that holds t. At t = 0 it is 0, so the whole product is 0.
    ✓ Instead: There are three zeros: −3, 0 and 5. The graph meets the horizontal axis at (−3, 0), (0, 0) and (5, 0).

    Tips and tricks

    • Trap: Dropping the power outside the brackets loses the zero at the origin.
    • Trick: Check the product and the sum before writing brackets.

    Part 4: Group four terms

    What it asks: Find zeros when two pairs share a bracket.

    The plan

    1. Group the terms into two pairs.
    2. Take out a common factor from each pair.
    3. Check that both remaining brackets match, including signs.
    4. Take out the shared bracket and factor any difference of squares.
    5. Solve every factor that has an x and substitute into the original sum.
    x³x²x²−9x−9−9x1
    An area model with sides x2 + −9 and x + 1.

    Tips and tricks

    • Trap: Mismatched brackets cannot be taken out as one common factor.
    • Trick: Expand each grouped product once to check its signs.

    Part 5: A formula that factors like a quadratic

    What it asks: Find real zeros when the powers fit a quadratic pattern.

    The powers four, two and zero form a quadratic in x squared. Factor that smaller pattern first, then solve for x. Keep exact square roots in the answer.

    • Why x4 is a square: x2 · x2 = x4, so x4 = (x2)2.
    • Rule: x4 + bx2 + c = (x2 + p)(x2 + q) when p · q = c and p + q = b.
    • x2 − k with k positive: x2 = k, so x = k or x = −k. When k is a perfect square such as 9, the bracket also splits as a difference of squares: x2 − 9 = (x − 3)(x + 3).
    • x2 + k with k positive: no real zero, because x2 is never negative.
    • Exact answers keep the square-root sign. A decimal such as 1.414 is a rounded value, good for placing the point on a graph.

    The plan

    1. Take out any common factor.
    2. Treat x squared as one temporary variable.
    3. Factor that quadratic, then replace the temporary variable with x squared.
    4. Solve each bracket. When x2 equals a positive number, x is its square root or the negative of it. When x2 equals a negative number, there is no real solution.
    5. Include zeros from the common factor and check them in the original formula.

    x4 + 5x2 − 14, with x2 as the block

    block2 + 5 · block − 14

    7 · (−2) = −14 and 7 + (−2) = 5

    (block + 7)(block − 2)

    (x2+7)(x2−2)

    x2 + 7: no zero. x2 − 2: x = 2 or x = −2

    Worked example

    A number in front, a block, and zeros that are square roots

    Find the x-intercepts of f(x) = 3x4 + 15x2 − 42.

    What it asks. Find the real x-intercepts as points.

    Show the steps and the answer

    The plan. Take out the common number 3, factor in x squared, then solve the brackets over the real numbers.

    input xoutput f(x)−266−1−240−421−24266
    The output changes sign between −2 and −1 and between 1 and 2, where −2 and 2 sit.
    1. Plan. Take out the common number 3, factor in x squared, then solve the brackets over the real numbers.
    2. Every term can be divided by 3. Take the 3 out first.
    3. Read x2 as one block. The bracket is then a trinomial: block2 + 5 · block − 14.
    1. Pull out the common factor 3: f(x)=3(x4+5x2−14).3, 15 and −42 can all be divided by 3. Multiply back: 3 · x4 = 3x4, 3 · 5x2 = 15x2, 3 · (−14) = −42.
    2. Read x2 as one block. Since x4=(x2)2, the bracket is block2+5· block −14.The first power, 4, is twice the middle power, 2, and the last term has no x. That is the shape of a trinomial.
    3. Find two numbers that multiply to −14 and add to 5. The pairs that multiply to −14 are 1 and −14,−1 and 14, 2 and −7,−2 and 7. Their sums are −13, 13, −5 and 5. The pair −2 and 7 adds to 5.The same rule as for any trinomial: the two numbers multiply to the last number and add to the middle number.
    4. Write the brackets with x2 back in place of the block: f(x)=3(x2+7)(x2−2).Multiply back: x4 − 2x2 + 7x2 − 14 = x4 + 5x2 − 14.
    5. Take x2+7. Setting it equal to 0 gives x2=−7. No real number works, so this bracket gives no zero.A square is never negative, so x2 + 7 is always 7 or more.
    6. Take x2−2. Setting it equal to 0 gives x2=2, so x=2 or x=−2.Two numbers square to 2: the positive square root and its negative. 2 is about 1.414.
    7. Write the intercepts as points: (−2,0) and (2,0).The 3 in front and the bracket x2 + 7 are never 0, so they add no intercepts.
    Answer
    • f(x)=3(x2+7)(x2−2)
    • x-intercepts: (−2, 0) and (2, 0)
    Double-check Plug x2 = 2 into the original formula. Then x4 = 2 · 2 = 4, so the output is 3(4) + 15(2) − 42 = 12 + 30 − 42 = 0, for 2 and for −2. The signs on each side agree with a crossing between 1 and 2: f(1) = 3 + 15 − 42 = −24 is negative and f(2) = 48 + 60 − 42 = 66 is positive, and 1.414 is between 1 and 2.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: x2 − 2 = 0 gives x = 1, because 2 ÷ 2 = 1.
    x2 means x times x, not 2 times x. 1 · 1 = 1, not 2.
    ✓ Instead: x2 = 2 gives x = 2 or x = −2. Check: 2 · 2 = 2.
    ✗ Not this: x2 + 7 gives the zeros 7 and −7.
    Plug in: (7)2 + 7 = 7 + 7 = 14, not 0. The plus sign makes the bracket 7 or more for every real x.
    ✓ Instead: Only a bracket x2 minus a positive number gives real zeros. x2 + 7 gives none.

    Tips and tricks

    • Trap: Keeping only the positive square root loses a real zero.
    • Trick: A bracket x squared plus a positive number has no real zero.

    5 How

    1. Use the zero-product rule on f(x) = −2x(x + 4)(x − 1): a product is zero exactly when a factor is zero. This formula is already one product, so its factors can be solved separately.
    2. Skip −2: it is a number other than zero, so it can never make the product zero. Set the factors containing x equal to zero: x = 0, x + 4 = 0 and x − 1 = 0.
    3. Solve each equation by keeping both sides equal. Subtract 4 in x + 4 = 0 to get x = −4; add 1 in x − 1 = 0 to get x = 1. The lone x gives x = 0.
    4. Use the intercept rule: each real zero c gives the point (c, 0). List the distinct zeros −4, 0 and 1, and plot (−4, 0), (0, 0) and (1, 0). Every factor containing x has been used, so this list is complete.
    5. Check by substitution in the original product: f(−4) = −2 · (−4) · 0 · (−5) = 0, f(0) = −2 · 0 · 4 · (−1) = 0 and f(1) = −2 · 1 · 5 · 0 = 0. Each proposed zero makes a factor zero.

    Choose a factoring route

    1
    Is the formula already one product?
    YesSolve each factor.
    NoTake out a common factor, then look for squares, a trinomial or grouping.

    6 Worked example

    Worked example

    Three factors, a number in front and a lone x

    Find every zero of f(x) = −2x(x + 4)(x − 1).

    What it asks. Find every input that makes the output zero.

    Show the steps and the answer

    The plan. Skip the number in front, set each factor with an x equal to zero, then solve.

    −2: only a number, no zero

    x: gives x = 0

    x + 4: gives x = −4

    x − 1: gives x = 1

    input xoutput f(x)−560−40−3−24−2−24−1−1200102−24↑ solve: output given, read every input above it
    The three 0s in the output row sit under −4, 0 and 1, one for each factor with an x.
    1. Plan. Skip the number in front, set each factor with an x equal to zero, then solve.
    1. Check the shape: f(x)=−2·x·(x+4)·(x−1) is one product, with nothing added or subtracted outside the factors.Zeros can be read off only from a product. A term added at the end, such as + 6, would break the rule.
    2. Skip the factor −2.It is −2 for every input. It is never 0, so it cannot make the product 0, and −2 is not a zero.
    3. Set the lone x equal to 0: x=0.This finds the input that makes the factor x equal 0, since x is the same as (x − 0). Plug it back in: f(0) = −2 · 0 · 4 · (−1) = 0.
    4. Set x + 4 = 0, then subtract 4 from both sides: x=−4.This finds the one input that makes x + 4 equal 0. Plug it back in: −4 + 4 = 0, so f(−4) = −2 · (−4) · 0 · (−5) = 0. The gotcha: a plus inside the factor gives a negative zero.
    5. Set x − 1 = 0, then add 1 to both sides: x=1.This finds the one input that makes x − 1 equal 0. Plug it back in: 1 − 1 = 0, so f(1) = −2 · 1 · 5 · 0 = 0.
    6. List the zeros from smallest to largest: −4, 0, 1.Every factor that holds an x has been used. By the zero product property, any input that gives 0 must make some factor 0, so there are no other zeros.
    Answer
    • x=−4
    • x = 0
    • x = 1
    • On the graph: the points (−4, 0), (0, 0) and (1, 0).
    Double-check Multiply out, a second way to the same zeros. First (x + 4)(x − 1) = x2 + 3x − 4, then −2x times that gives f(x) = −2x3 − 6x2 + 8x. In this form f(−4) = −2(−64) − 6(16) + 8(−4) = 128 − 96 − 32 = 0, f(0) = 0 − 0 + 0 = 0 and f(1) = −2 − 6 + 8 = 0. The table, worked from this form for the inputs −5 to 2, holds 0 in the output row only under −4, 0 and 1. The input 2, which is not on the list, gives f(2) = −16 − 24 + 16 = −24.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 11

    Rung 1: two minus signs

    Find the zeros of f(x) = (x − 2)(x − 7).

    What it asks. Find the inputs that make the product zero.

    Show the steps and the answer

    The plan. Set each bracket equal to zero and solve.

    (2, 0)(7, 0)2468−44812
    The graph of f meets the x-axis at 2 and at 7, one point for each factor.
    1. Plan. Set each bracket equal to zero and solve.
    1. Set the first factor equal to 0: x−2=0, then add 2 to both sides: x=2.This finds the input that makes x − 2 equal 0. Plug it back in: 2 − 2 = 0, so f(2) = 0 · (−5) = 0.
    2. Set the second factor equal to 0: x−7=0, then add 7 to both sides: x=7.This finds the input that makes x − 7 equal 0. Plug it back in: f(7) = 5 · 0 = 0.
    3. List the zeros: 2 and 7.Each factor gave one zero, and by the zero product property no other input makes the product 0.
    Answer
    • x = 2
    • x = 7
    Double-check Multiply out: (x − 2)(x − 7) = x2 − 9x + 14. Then f(2) = 4 − 18 + 14 = 0 and f(7) = 49 − 63 + 14 = 0.

    Rung 2 of 11

    Rung 2: a plus sign gives a negative zero

    Find the zeros of g(x) = (x + 6)(x − 1).

    What it asks. Find the inputs that make the product zero.

    Show the steps and the answer

    The plan. Set each bracket equal to zero and solve.

    (−6, 0)(1, 0)−8−6−4−22−12−8−448
    The graph of g meets the x-axis at −6, on the negative side, because the factor is x + 6.
    1. Plan. Set each bracket equal to zero and solve.
    1. Set x + 6 = 0, then subtract 6 from both sides: x=−6.This finds the input that makes x + 6 equal 0. Plug it back in: −6 + 6 = 0, so g(−6) = 0 · (−7) = 0. The gotcha: the plus in the factor gives a negative zero.
    2. Set x − 1 = 0, then add 1 to both sides: x=1.This finds the input that makes x − 1 equal 0. Plug it back in: g(1) = 7 · 0 = 0.
    3. List the zeros from smallest to largest: −6, 1.Each factor gave one zero, and no other input makes either factor 0.
    Answer
    • x=−6
    • x = 1
    Double-check Multiply out: (x + 6)(x − 1) = x2 + 5x − 6. Then g(−6) = 36 − 30 − 6 = 0 and g(1) = 1 + 5 − 6 = 0. The tempting wrong answer 6 gives g(6) = 12 · 5 = 60, not 0.

    Rung 3 of 11

    Rung 3: a number in front and a lone x

    Find the zeros of h(x) = 5x(x − 8).

    What it asks. Find the inputs that make the product zero.

    Show the steps and the answer

    The plan. Skip the number in front, set each factor with an x equal to zero, then solve.

    (0, 0)(8, 0)−2246810−64−323264
    The graph of h passes through the origin.
    1. Plan. Skip the number in front, set each factor with an x equal to zero, then solve.
    1. Skip the factor 5.It is 5 for every input and never 0, so it cannot make the product 0. The gotcha: 5 is not a zero.
    2. Set the lone x equal to 0: x=0.This finds the input that makes the factor x equal 0, since x is (x − 0). Plug it back in: h(0) = 5 · 0 · (−8) = 0.
    3. Set x − 8 = 0, then add 8 to both sides: x=8.This finds the input that makes x − 8 equal 0. Plug it back in: h(8) = 5 · 8 · 0 = 0.
    Answer
    • x = 0
    • x = 8
    Double-check Multiply out: h(x) = 5x2 − 40x. Then h(0) = 0 − 0 = 0 and h(8) = 5 · 64 − 40 · 8 = 320 − 320 = 0. The tempting 5 gives h(5) = 125 − 200 = −75, not 0.

    Rung 4 of 11

    Rung 4: a number in front of x inside a factor

    Find the zeros of p(x) = (2x − 5)(x + 3).

    What it asks. Find the zeros, including one from a factor like 2x − 5.

    Show the steps and the answer

    The plan. Set each bracket equal to zero; divide by the number multiplying x.

    (−3, 0)(2.5, 0)−4−224−12−6612
    The graph of p meets the x-axis at −3 and at 2.5, which is 52, and not at 5.
    1. Plan. Set each bracket equal to zero; divide by the number multiplying x.
    1. Set 2x−5=0. Add 5 to both sides: 2x=5. Divide both sides by 2: x=52.This finds the input that makes 2x − 5 equal 0. The gotcha: reading off the 5 would be wrong because of the 2 in front of x. Plug it back in: 2 · 52 = 5, and 5 − 5 = 0.
    2. Set x + 3 = 0, then subtract 3 from both sides: x=−3.This finds the input that makes x + 3 equal 0. Plug it back in: −3 + 3 = 0.
    3. List the zeros from smallest to largest: −3,52.52 is 2.5, which is more than −3.
    Answer
    • x=−3
    • x = 52, which is 2.5
    Double-check Pull the 2 out of the first factor: 2x − 5 = 2(x − 52), because 2 · 52 = 5. So p(x) = 2(x − 52)(x + 3), and the factor (x − 52) has the plain shape x − c with c = 52. The tempting 5 gives p(5) = 5 · 8 = 40, not 0.

    Rung 5 of 11

    Rung 5: factor a difference of squares first

    Find the zeros of q(x) = (x − 2)(x2 − 49).

    What it asks. Find every real zero.

    Show the steps and the answer

    The plan. Split the difference of squares into two brackets, then set each factor equal to zero.

    x2−49=(x−7)(x+7)

    x − 2 gives 2

    x − 7 gives 7

    x + 7 gives −7

    1. Plan. Split the difference of squares into two brackets, then set each factor equal to zero.
    1. Factor x2 − 49 as a difference of squares: x2−49=(x−7)(x+7).49 is 72, and a2 − b2 = (a − b)(a + b). Now every factor has the shape x − c or x + c.
    2. Rewrite: q(x)=(x−2)(x−7)(x+7).It is the same polynomial, now fully in factored form.
    3. Set each factor equal to 0: x−2=0 gives x=2,x−7=0 gives x=7, and x+7=0 gives x=−7.Each small equation finds the one input that makes that factor 0. Plug them back in: 2 − 2 = 0, 7 − 7 = 0 and −7 + 7 = 0.
    4. List the zeros from smallest to largest: −7, 2, 7.Three factors with x give three zeros. The gotcha: stopping at 7 and forgetting −7.
    Answer
    • x=−7
    • x = 2
    • x = 7
    Double-check Solve x2 − 49 = 0 a second way: add 49 to both sides to get x2 = 49, and both 7 and −7 square to 49, since 72 = 49 and (−7)2 = 49. Plug into the original: q(7) = 5 · (49 − 49) = 0, q(−7) = (−9) · (49 − 49) = 0 and q(2) = 0 · (4 − 49) = 0.

    Rung 6 of 11

    Rung 6: a factor that is never 0

    Find the zeros of r(x) = (x + 3)(x2 + 4).

    What it asks. Find every real zero.

    Show the steps and the answer

    The plan. Set each factor equal to zero; a square plus a positive number has no real solution.

    no square ever lands below 0(−3, 9)(3, 9)(0, 0)−33−49
    The graph of y = x2 never dips below the x-axis, so x2 + 4 never gets down to 0.
    input xoutput x² + 4−313−28−15041528313
    The smallest output of x2 + 4 is the 4 under 0, and no column holds a 0.
    1. Plan. Set each factor equal to zero; a square plus a positive number has no real solution.
    1. Set x + 3 = 0, then subtract 3 from both sides: x=−3.This finds the input that makes x + 3 equal 0. Plug it back in: r(−3) = 0 · (9 + 4) = 0.
    2. Try to set x2+4=0. Subtracting 4 from both sides gives x2=−4.This asks which input would make the second factor 0.
    3. No real number works, so x2+4 gives no zero.A square is never negative: 22 = 4 and (−2)2 = 4. So x2 + 4 is always 4 or more. The gotcha: x2 + 4 does not split into (x − 2)(x + 2), which multiplies out to x2 − 4.
    4. The only zero is −3.Only the first factor can ever be 0.
    Answer
    x = −3, the only zero
    Double-check Look at the table of the second factor, x2 + 4: its smallest output is the 4 under 0, and no column holds a 0. That matches the reason: x2 is never below 0, so x2 + 4 is never below 4. The tempting extra zero 2 gives r(2) = 5 · 8 = 40, not 0.

    Rung 7 of 11

    Rung 7: factor by grouping first

    Find the zeros of s(x) = x3 + x2 − 9x − 9.

    What it asks. Find the zeros of a four-term polynomial.

    Show the steps and the answer

    The plan. Group pairs, take out the shared bracket, then solve every factor.

    x³x²x²−9x−9−9x1
    The same picture again: An area model with sides x2 + −9 and x + 1.
    1. Plan. Group pairs, take out the shared bracket, then solve every factor.
    1. Notice that s is a sum of four terms, not a product, so factor it first. Group the terms in pairs: (x3+x2)+(−9x−9).Zeros can be read only from factored form, and each pair has a common factor.
    2. Pull the common factor out of each pair: x2(x+1)−9(x+1).x3 + x2 = x2(x + 1) and −9x − 9 = −9(x + 1). Both pairs now hold the same bracket (x + 1).
    3. Pull out the shared bracket: (x2−9)(x+1).This is distributing run backward: x2 · (x + 1) − 9 · (x + 1) = (x2 − 9)(x + 1).
    4. Factor x2 − 9 as a difference of squares: s(x)=(x−3)(x+3)(x+1).9 is 32, and a2 − b2 = (a − b)(a + b).
    5. Set each factor equal to 0: x−3=0 gives 3, x+3=0 gives −3, and x+1=0 gives −1.Each small equation finds the one input that makes that factor 0. Plug them back in: 3 − 3 = 0, −3 + 3 = 0 and −1 + 1 = 0.
    6. List the zeros from smallest to largest: −3,−1, 3.Three factors with x give three zeros.
    Answer
    • x=−3
    • x=−1
    • x = 3
    Double-check Plug each zero into the original four terms, a second way: s(−3) = −27 + 9 + 27 − 9 = 0, s(−1) = −1 + 1 + 9 − 9 = 0 and s(3) = 27 + 9 − 27 − 9 = 0.

    Rung 8 of 11

    Rung 8: a common factor, then a trinomial

    Find the x-intercepts of f(x) = x3 − 2x2 − 24x.

    What it asks. Find the x-intercepts as points.

    Show the steps and the answer

    The plan. Take out the common x, factor the trinomial, set each factor equal to zero, then write the points.

    x3−2x2−24x=x(x2−2x−24)

    4 · (−6) = −24 and 4 + (−6) = −2

    x(x+4)(x−6)

    x gives 0, x + 4 gives −4, x − 6 gives 6

    1. Plan. Take out the common x, factor the trinomial, set each factor equal to zero, then write the points.
    2. Every term holds an x. Take it out in front.
    3. For x2 − 2x − 24, look for two numbers that multiply to −24 and add to −2.
    1. Pull out the common factor x: f(x)=x(x2−2x−24).Every term holds at least one x. Multiply back: x · x2 = x3, x · (−2x) = −2x2, x · (−24) = −24x.
    2. Find two numbers that multiply to −24 and add to −2. Try the pairs with the larger number negative: 1 and −24 add to −23, 2 and −12 add to −10, 3 and −8 add to −5, 4 and −6 add to −2. The pair is 4 and −6.The product is negative, so the numbers have opposite signs. The sum is negative, so the larger one carries the minus sign.
    3. Write the brackets: f(x)=x(x+4)(x−6).Multiply back: (x + 4)(x − 6) = x2 − 6x + 4x − 24 = x2 − 2x − 24.
    4. Set each factor equal to 0: x=0,x+4=0 gives x=−4, and x−6=0 gives x=6.Each small equation finds the one input that makes that factor 0. The lone x in front is a factor too.
    5. Write the points from left to right: (−4,0), (0, 0) and (6, 0).An x-intercept is a point on the x-axis, so its second coordinate is 0.
    Answer
    • f(x)=x(x+4)(x−6)
    • x-intercepts: (−4, 0), (0, 0) and (6, 0)
    Double-check Plug into the original formula: f(−4) = −64 − 32 + 96 = 0, f(0) = 0 and f(6) = 216 − 72 − 144 = 0. The tempting wrong sign fails: f(4) = 64 − 32 − 96 = −64, not 0.

    Rung 9 of 11

    Rung 9: grouping when the shared bracket has a number in front of x

    Find the zeros of g(x) = 3x3 − 2x2 − 27x + 18.

    What it asks. Find the zeros of a four-term polynomial.

    Show the steps and the answer

    The plan. Group pairs, take out the shared bracket, then solve every factor.

    3x³−2x²x²−27x18−93x−2
    The rows x2 and −9 times the columns 3x and −2 give the four terms, so g(x) = (x2 − 9)(3x − 2).
    1. Plan. Group pairs, take out the shared bracket, then solve every factor.
    2. Four terms and no factor shared by all of them: group the terms in pairs.
    3. The shared bracket is 3x − 2. Solve 3x − 2 = 0 for its zero. Do not read the 2 off.
    1. Group the terms in pairs: (3x3−2x2)+(−27x+18).Four terms with no factor shared by all of them call for grouping. Each pair has its own common factor.
    2. Pull the common factor out of each pair: x2(3x−2)−9(3x−2).3x3 − 2x2 = x2(3x − 2). Taking −9 out of the second pair gives −27x + 18 = −9(3x − 2), the same bracket.
    3. Pull out the shared bracket: g(x)=(3x−2)(x2−9).Both pieces hold (3x − 2), so it comes out in front, the way 5 · 7 − 3 · 7 = (5 − 3) · 7.
    4. Factor x2 − 9 as a difference of squares: g(x)=(3x−2)(x−3)(x+3).9 is 32, and a2 − b2 = (a − b)(a + b).
    5. Set each factor equal to 0. 3x−2=0: add 2 to get 3x=2, then divide by 3 to get x=23. x−3=0 gives x=3. x+3=0 gives x=−3.Each small equation finds the input that makes that factor 0. The 3 in front of x means you solve the equation.
    6. List the zeros from smallest to largest: −3,23, 3.23 is between 0 and 1.
    Answer
    • x=−3
    • x=23
    • x = 3
    Double-check Plug each zero into the original formula. g(3) = 81 − 18 − 81 + 18 = 0. g(−3) = −81 − 18 + 81 + 18 = 0. g(23) = 3 · 827 − 2 · 49 − 27 · 23 + 18 = 89 − 89 − 18 + 18 = 0. The tempting 2 gives g(2) = 24 − 8 − 54 + 18 = −20, not 0.

    Rung 10 of 11

    Rung 10: a common factor, then a trinomial in x2

    Find the x-intercepts of p(x) = x5 − 10x3 + 9x.

    What it asks. Find the x-intercepts as points.

    Show the steps and the answer

    The plan. Take out x, factor the bracket as a quadratic in x squared, split each difference of squares, then solve every factor.

    input xoutput p(x)−30−230−1000102−3030↑ solve: output given, read every input above it
    Five 0s in the output row, under −3, −1, 0, 1 and 3.
    1. Plan. Take out x, factor the bracket as a quadratic in x squared, split each difference of squares, then solve every factor.
    2. Every term holds an x. Take it out, then read x2 as one block in what is left.
    3. Both brackets you get are differences of squares, so each one splits again.
    1. Pull out the common factor x: p(x)=x(x4−10x2+9).Every term holds at least one x. Multiply back: x · x4 = x5, x · (−10x2) = −10x3, x · 9 = 9x.
    2. Read x2 as one block: the bracket is block2−10· block +9. Find two numbers that multiply to 9 and add to −10: −1 and −9.The product is positive and the sum is negative, so both numbers are negative. −1 · (−9) = 9 and −1 + (−9) = −10.
    3. Write the brackets: p(x)=x(x2−1)(x2−9).Multiply back: x4 − 9x2 − x2 + 9 = x4 − 10x2 + 9.
    4. Factor each difference of squares: x2−1=(x−1)(x+1) and x2−9=(x−3)(x+3). So p(x)=x(x−1)(x+1)(x−3)(x+3).1 is 12 and 9 is 32, and a2 − b2 = (a − b)(a + b).
    5. Set each factor equal to 0: x=0,x=1,x=−1,x=3 and x=−3.Five factors that hold x give five zeros, which fits the degree 5.
    6. Write the points from left to right: (−3,0),(−1,0), (0, 0), (1, 0) and (3, 0).Each zero c gives the x-intercept (c, 0).
    Answer
    • p(x)=x(x−1)(x+1)(x−3)(x+3)
    • x-intercepts: (−3, 0), (−1, 0), (0, 0), (1, 0) and (3, 0)
    Double-check Plug into the original formula: p(1) = 1 − 10 + 9 = 0, p(−1) = −1 + 10 − 9 = 0, p(3) = 243 − 270 + 27 = 0, p(−3) = −243 + 270 − 27 = 0 and p(0) = 0. An input that is not on the list gives another output: p(2) = 32 − 80 + 18 = −30.

    Rung 11 of 11

    Rung 11: zeros that are square roots

    Find the zeros of q(x) = x6 − 4x4 − 12x2.

    What it asks. Find exact real zeros after factoring a quadratic in x squared.

    Show the steps and the answer

    The plan. Keep the common power of x; factor in x squared and take both real square roots.

    x6−4x4−12x2=x2(x4−4x2−12)

    =x2(x2+2)(x2−6)

    x2 gives 0

    x2 + 2 gives no zero

    x2 − 6 gives 6 and −6

    1. Plan. Keep the common power of x; factor in x squared and take both real square roots.
    2. Every term holds x2. Take x2 out in front, then read x2 as one block in what is left.
    3. A bracket x2 minus a number gives two zeros, a square root and its negative. A bracket x2 plus a number gives none.
    1. Pull out the common factor x2: q(x)=x2(x4−4x2−12).Every term holds at least x2. Multiply back: x2 · x4 = x6, x2 · (−4x2) = −4x4, x2 · (−12) = −12x2.
    2. Read x2 as one block: the bracket is block2−4· block −12. Find two numbers that multiply to −12 and add to −4: 2 and −6.2 · (−6) = −12 and 2 + (−6) = −4.
    3. Write the brackets: q(x)=x2(x2+2)(x2−6).Multiply back: x4 − 6x2 + 2x2 − 12 = x4 − 4x2 − 12.
    4. Take the x2 in front: x2=0 gives x=0.The factor in front holds x, so it gives a zero.
    5. Take x2+2: setting it equal to 0 gives x2=−2. No real number works, so this bracket gives no zero.A square is never negative, so x2 + 2 is always 2 or more.
    6. Take x2−6: setting it equal to 0 gives x2=6, so x=6 or x=−6.Both square to 6. 6 is not a perfect square, so the exact answer keeps the square-root sign. 6 is about 2.449.
    7. List the zeros from smallest to largest: −6, 0, 6.−6 is about −2.449 and 6 is about 2.449.
    Answer
    • x=−6
    • x = 0
    • x=6
    Double-check Plug x2 = 6 into the original formula: x4 = 36 and x6 = 216, so the output is 216 − 4(36) − 12(6) = 216 − 144 − 72 = 0. The signs on each side agree: q(2) = 64 − 64 − 48 = −48 is negative and q(3) = 729 − 324 − 108 = 297 is positive, and 2.449 is between 2 and 3.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The zeros of f(x) = (x + 5)(x − 1) are 5 and −1.
    That copies the numbers with the signs they have inside the factors. Plug in 5: (5 + 5)(5 − 1) = 10 · 4 = 40, not 0.
    ✓ Instead: Ask what makes each factor 0: x + 5 = 0 at x = −5, and x − 1 = 0 at x = 1. The zeros are −5 and 1: f(−5) = 0 · (−6) = 0 and f(1) = 6 · 0 = 0.
    ✗ Not this: f(x) = 4(x − 2) has two zeros, 4 and 2.
    The 4 is only a number. It stays 4 for every input, so it is never 0, and f(4) = 4 · 2 = 8, not 0.
    ✓ Instead: The only zero is 2: f(2) = 4 · 0 = 0. A number in front changes how tall the graph is, not where it meets the x-axis.
    ✗ Not this: f(x) = x(x − 4) has one zero, 4.
    The lone x is a factor too. It is (x − 0), and f(0) = 0 · (−4) = 0.
    ✓ Instead: There are two zeros, 0 and 4. The graph passes through the origin (0, 0) and through (4, 0).
    ✗ Not this: The factor 3x − 6 gives the zero 6.
    Plug in 6: 3 · 6 − 6 = 18 − 6 = 12, not 0. The 3 in front of x changes the answer.
    ✓ Instead: Solve 3x − 6 = 0: add 6 to get 3x = 6, then divide by 3 to get x = 2. Check: 3 · 2 − 6 = 0.
    ✗ Not this: f(x) = (x − 2)(x + 3) + 6 has zeros 2 and −3.
    The + 6 outside the brackets makes f a sum, not a product, so the rule does not apply. f(2) = 0 · 5 + 6 = 6, not 0.
    ✓ Instead: Multiply out first: x2 + x − 6 + 6 = x2 + x = x(x + 1). The zeros are 0 and −1: f(0) = (−2)(3) + 6 = 0 and f(−1) = (−3)(2) + 6 = 0.
    ✗ Not this: x2 + 9 = (x − 3)(x + 3), so (x − 1)(x2 + 9) has zeros 1, 3 and −3.
    (x − 3)(x + 3) multiplies out to x2 − 9, not x2 + 9. Plug in 3: (3 − 1)(9 + 9) = 2 · 18 = 36, not 0.
    ✓ Instead: x2 + 9 is never 0, because x2 is never negative, so x2 + 9 is always 9 or more. The only zero is 1.

    Tips and tricks

    • Ask each factor one question: what input makes you 0? That input is the zero.
    • Memory device: the zero wears the opposite sign. x − 3 gives 3 and x + 3 gives −3. The shortcut holds only when x stands alone with no number in front; for 2x − 5, solve instead.
    • Check every zero by plugging it into the original formula. The output must come out exactly 0; any other number means a sign or a solving step slipped.
    • A lone x is the factor (x − 0), so it gives the zero 0 and the graph passes through the origin.
    • A factor that shows up more than once, such as (x − 4)2 = (x − 4)(x − 4), still gives only the one zero 4. How many times it repeats changes what the graph does there; the next lesson takes that up.
    • You will also hear a zero called a root: a solution of f(x) = 0. Keep the word apart from the square-root sign, although a root can be a square root: the roots of x2 − 2 are 2 and −2. The point (c, 0) where the graph meets the x-axis is called an x-intercept.

    7 The trap

    Wrong: copy the sign inside a factor. Right: solve the factor equal to zero, then substitute to check.

    Keep in mind

    • What a test asks from this lesson: the zeros of a polynomial, or its x-intercepts written as points, from a formula that is factored and from a formula you must factor first.
    • Four ways to factor first, in the order to try them: pull out a common factor, group four terms in pairs, split a trinomial with two numbers that multiply to its last number and add to its middle number, and read x2 as one block when the powers are 4 and 2.
    • After factoring, take the brackets one at a time. A number gives no zero. A power of x gives 0. x − c gives c. ax − b is solved. x2 − k gives k and −k. x2 + k gives none.

    Flash cards

    Say the answer out loud, then flip.

    What is a zero of a polynomial, and where does it show up on the graph?
    • It is an input that gives the output 0.
    • On the graph, a real zero c marks the point (c, 0) where the curve meets the x-axis.
    Why does one factor equal to 0 make the whole product 0?
    • Zero times any number is 0.
    • It works like holiday lights wired in a row: one burned-out bulb makes the whole string go dark.
    What zero does the factor (x + 9) give?
    • −9, not 9.
    • Ask what input makes the factor 0: −9 + 9 = 0.
    Find the zeros of f(x) = 3x(x − 4)(x + 6).
    • The zeros are −6, 0 and 4.
    • x + 6 = 0 gives x = −6, the lone x gives x = 0, and x − 4 = 0 gives x = 4.
    • The 3 is only a number, so it gives no zero.

    Comes back in