Quarry School

End behavior of a polynomial comes from its leading term

Subject: MathematicsLeans on: Leading term, leading coefficient and degreeLeans on: Powers of negative numbersLeans on: Arrow notationLeans on: End behavior of a power functionLeans on: Dividing and multiplying powers of xLeans on: Multiplying two brackets
Level 2 · BuildingAbout 27 min read9 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Leans on

    Quick review (2 minutes)

    In plain words

    The big picture. Predict a polynomial’s far-left and far-right directions without drawing the whole graph.

    Rule

    If f(x) = anxn + (terms with lower powers of x), where an ≠ 0 is the leading coefficient and the degree n is 1 or more, then f has the same end behavior as the power function y = anxn.
    n even, an > 0: as x → −∞, f(x) → ∞, and as x → ∞, f(x) → ∞ (both arms up).
    n even, an < 0: as x → −∞, f(x) → −∞, and as x → ∞, f(x) → −∞ (both arms down).
    n odd, an > 0: as x → −∞, f(x) → −∞, and as x → ∞, f(x) → ∞ (left arm down, right arm up).
    n odd, an < 0: as x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞ (left arm up, right arm down).

    Step

    1. For f(x) = 50x2 − x3 + 100, use the degree rule to find the highest power, 3. The leading term is −x3 and its coefficient is −1, even though it is written in the middle.

    2. Apply the leading-term rule for end behavior. Use −x3 to predict the two ends, because the lower-power terms become small compared with it far enough from zero. Keep those terms when calculating actual outputs.

    3. Apply the power-function rules to −x3. The negative coefficient sends the right end down: as x → ∞, f(x) → −∞. The odd degree makes the left end opposite: as x → −∞, f(x) → ∞.

    4. Check by substituting into the whole polynomial: f(100) = 500,000 − 1,000,000 + 100 = −499,900, and f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100. The signs match the predicted ends. Here the leading term outweighs the other terms together; f(10) = 4,100 shows why a small input can mislead.

    Strategy

    1. Say what is asked: where does the graph go far to the right (x → ∞) and far to the left (x → −∞)?

    2. Find the leading term, the term with the highest power of x. If the polynomial is a product of brackets, multiply the highest-power piece of each bracket to get it.

    3. Read the leading coefficient, including a hidden 1 or −1, and read the degree. If the degree is 0, the polynomial is a constant c and both ends stay at height c: stop there.

    4. Sign of the leading coefficient gives the right arm: positive up, negative down.

    5. Even degree: the left arm matches the right arm. Odd degree: the left arm is the opposite.

    6. Write the two arrow statements.

    7. Check by putting 100 and −100 (or 10 and −10 when the coefficients are small) into the whole polynomial and looking at the signs; they agree with the arms wherever the leading term outweighs all the other terms together.

    Question

    Find the end behavior of f(x) = 50x2 − x3 + 100. In plain words: say where the graph goes far to the right and far to the left.

    Answer

    As x → −∞, f(x) → ∞ (left arm up).
    As x → ∞, f(x) → −∞ (right arm down).

    Trap

    Taking the first term on the page as the leading term. In f(x) = 6 + 2x − x4 the first term is 6, but the leading term is −x4, the one with the highest power. Before reading any sign, scan every term for its power of x and circle the highest one. Then read the sign directly in front of that term, including a bare minus sign, which means −1.

    Term

    power function

    Definition

    One fixed nonzero number times x raised to a fixed power, with nothing added: f(x) = kxp. The power can be whole, negative or fractional.

    Term

    polynomial

    Definition

    A function built by adding or subtracting pieces, each a number times x to a whole-number power. Simplified without changing where it is defined, it has no x in the bottom of a fraction, under a root, or up in an exponent.

    Term

    term

    Definition

    One piece of a polynomial, cut off from the others at each plus or minus sign. The sign in front stays with its piece.

    Term

    coefficient

    Definition

    The number multiplying the x part of a term, sign included. In −5x2 the coefficient is −5. When no number is written, it is 1, so x3 has coefficient 1.

    Term

    degree

    Definition

    The highest power of x in a polynomial once it is multiplied out and like terms are combined, counting only terms whose coefficient is not 0. The zero polynomial has no degree. It is not the number of terms, nor the biggest coefficient. A plain number counts as power 0.

    Term

    leading term

    Definition

    The term with the highest power of x, sign and coefficient included. It need not be written first. When x is far from 0, it outweighs all the other terms.

    Term

    leading coefficient

    Definition

    The coefficient of the leading term, its sign included. Together with the degree, it decides where the graph's two ends point. In 3 + 2x − 7x⁴ it is −7.

    Term

    end behavior

    Definition

    What a graph does far to the left and far to the right. For a polynomial of degree 1 or more, each arm heads up forever or down forever.

    1 In plain words

    The big picture. Predict a polynomial’s far-left and far-right directions without drawing the whole graph. The leading term controls both ends. Use the vocabulary from the previous lesson and the power-function end rules; next, find where the graph meets the axes.

    Picture a footrace. One runner is slow but gets a huge head start. The other starts far behind but runs faster. Early in the race the head start is all you see. Wait long enough and the fast runner passes, and after that the gap only grows. A polynomial is a race between its terms. The leading term, the one with the highest power of x, is the fast runner. Close to x = 0 the other terms can be ahead. Far to the right or far to the left, the leading term is so much larger in size than the rest that it alone decides whether the graph heads up or down. The end behavior of a polynomial is the end behavior of its leading term.

    2 Picture it

    −1818−21600−108001080021600−24−121224−21600−108001080021600
    Solid is y = x3 − 6x2 + 12x − 5, which is (x − 2)3 + 3 multiplied out, and dashed is its leading term y = x3.

    Reminder

    Reminder: Leading term, leading coefficient and degree, Powers of negative numbers, Arrow notation, End behavior of a power function, Dividing and multiplying powers of x, Multiplying two brackets
    • Leading term, leading coefficient and degree. The leading term is the term with the highest power of x. In 4 + 2x − 5x3 it is −5x3, so the leading coefficient is −5 and the degree is 3.
    • Powers of negative numbers. An even power of a negative number is positive and an odd power is negative: (−10)2 = 100, but (−10)3 = −1,000.
    • Arrow notation. The line as x → ∞, f(x) → −∞ is read: as x moves farther and farther right, the outputs drop lower and lower without stopping. The symbol x → −∞ means moving farther and farther left.
    • End behavior of a power function. For y = kxp, the sign of k gives the right arm, and an even p makes the left arm match while an odd p makes it opposite: y = −x2 has both arms down, y = x3 has left arm down and right arm up.
    • Dividing and multiplying powers of x. Count the factors of x. x3 ÷ x2 = x, because three x's over two x's leaves one. x3 · x2 = x5, because three x's times two x's is five. With numbers: 1,000 ÷ 100 = 10.
    • Multiplying two brackets. Multiply each term of the first bracket by each term of the second, then combine: (x − 3)(x + 4) = x2 + 4x − 3x − 12 = x2 + x − 12.

    3 Why

    Compare the sizes of two terms by dividing. Take f(x) = x3 − 10x2 − 100 and a positive x. The size of the leading term divided by the size of the next term is x3 ÷ 10x2 = x10. At x = 10 that is 1: the two terms are tied. At x = 1,000 it is 100: the leading term is 100 times as big. A higher power carries at least one more factor of x than a lower one, and x has no ceiling, so no fixed coefficient can keep up. Far out, the other terms are pocket change, and the total takes the leading term's sign.

    4 The rule

    If f(x)=anxn+ (terms with lower powers of x), where an≠0 is the leading coefficient and the degree n is 1 or more, then f has the same end behavior as the power function y=anxn.source 1

    n even, an>0: as x→−∞,f(x)→∞, and as x→∞,f(x)→∞ (both arms up).
    n even, an<0: as x→−∞,f(x)→−∞, and as x→∞,f(x)→−∞ (both arms down).
    n odd, an>0: as x→−∞,f(x)→−∞, and as x→∞,f(x)→∞ (left arm down, right arm up).
    n odd, an<0: as x→−∞,f(x)→∞, and as x→∞,f(x)→−∞ (left arm up, right arm down).

    Sources (1)
    1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

    The same idea, five ways

    Say it

    Far from zero, a polynomial acts like its leading term.

    Write it

    The end behavior of a polynomial is the same as the end behavior of its leading term, so for degree 1 or more the degree and the leading coefficient tell where both arms of the graph point.

    In math
    • f(x) = anxn + ... + a1x + a0, with an ≠ 0 and degree n ≥ 1
    • end behavior of f = end behavior of y = anxn
    • for n ≥ 1: as x → ∞, f(x) → ∞ or f(x) → −∞
    • for n ≥ 1: as x → −∞, f(x) → ∞ or f(x) → −∞
    • example: f(x) = −2x3 + 7x − 1 has as x → −∞, f(x) → ∞ and as x → ∞, f(x) → −∞
    Like

    A mountain seen from an airplane: the boulders and gullies vanish, and only the one big slope still shows.

    See it

    even degree (2, 4, ...), positive leading coefficient: up on the left, up on the right

    even degree (2, 4, ...), negative leading coefficient: down on the left, down on the right

    odd degree (1, 3, ...), positive leading coefficient: down on the left, up on the right

    odd degree (1, 3, ...), negative leading coefficient: up on the left, down on the right

    The same idea, other ways

    As a picture

    This picture shows the same two curves as the lesson's main picture, but up close. Solid is y = x3 − 6x2 + 12x − 5. Dashed is its leading term alone, y = x3. Up close they are clearly different: the smaller terms −6x2 + 12x − 5 have moved the solid curve. Now look at the main picture again, where the window is thousands of units tall. The difference has shrunk to almost nothing and both left arms go down and both right arms go up. Zooming out shrinks everything the smaller terms do. Only the leading term survives the zoom.

    −2246−40−20204060
    Up close, the solid polynomial and its dashed leading term y = x3 are two different curves.
    As a story

    A chain of shops earns x3 dollars and spends 10x2 + 100 dollars, where x is the number of shops. Its profit is x3 − 10x2 − 100. With 5 shops it earns 125 and spends 350, a loss of 225. With 10 shops it earns 1,000 and spends 1,100, a loss of 100. With 100 shops it earns 1,000,000 and spends 100,100, a profit of 899,900. The costs never went away. They grew too. But the earnings grew faster, and from then on the earnings decide the story. The costs change the amount a little. They never again change the direction.

    With numbers

    Read the table in this lesson one row at a time. At x = 1 the leading term is 1 and the rest is −110, so the rest wins and f(1) = −109. At x = 10 the rest still wins, barely: f(10) = −100. At x = 100 the leading term is 1,000,000 and the rest is only −100,100. At x = 1,000 the rest is about one hundredth of the leading term. The last column divides f(x) by x3. It closes in on 1, which says f(x) and x3 are becoming almost the same size. The row for x = −1,000 shows the same thing on the left side.

    input xoutput f(x) ÷ x³1−10910−0.11000.899910000.9899999−10001.0100001
    The bottom row closes in on 1 as x grows, and it is near 1 again at x = −1,000.
    Why it must be true

    For any x other than 0, pull the leading term out in front: x3 − 10x2 − 100 = x3 · (1 − 10x − 100x3). Multiply it back to see that nothing changed: x3 · 1 = x3, x3 · 10x = 10x2, and x3 · 100x3 = 100. Now let x grow. A fraction with a fixed top and a growing bottom shrinks toward 0, so the bracket is squeezed toward 1. At x = 1,000 the bracket is 1 − 0.01 − 0.0000001 = 0.9899999, the same number as in the table. So f(x) is x3 times a number close to 1. It has the sign of x3, and it is huge whenever x3 is huge.

    As a rule of thumb

    For a polynomial of degree 1 or more, two questions settle everything. First: what is the sign of the leading coefficient? That sign is the direction of the right arm, plus for up and minus for down. Second: is the degree even or odd? Even means the left arm copies the right arm. Odd means the left arm does the opposite. Say it as: even, twins. Odd, opposites.

    Right arm: the sign of the leading coefficient

    positive → right arm up

    negative → right arm down

    Left arm: look at the degree

    even → same as the right arm

    odd → opposite of the right arm

    xleading term x3all the rest: −10x2 − 100f(x)=x3−10x2−100f(x)÷x3
    11−110−109−109
    101,000−1,100−100−0.1
    1001,000,000−100,100899,900≈ 0.90
    1,0001,000,000,000−10,000,100989,999,900≈ 0.99
    10,0001,000,000,000,000−1,000,000,100998,999,999,900≈ 0.999
    −1,000−1,000,000,000−10,000,100−1,010,000,100≈ 1.01

    Part 1: Build a table for both ends

    A table is a set of snapshots along a road. One nearby snapshot cannot show where the road goes. Choose inputs far from 0 on each side. Compute the whole formula, then compare those outputs with the leading term. The table checks your arithmetic and supports the rule; finitely many samples do not prove what happens forever.

    • Method: choose two negative inputs and two positive inputs, with larger distances from 0. Substitute into every term or factor.
    • Read the left end by moving toward more negative inputs. Read the right end by moving toward more positive inputs.
    • Why: dividing lower powers by the leading power produces fractions that shrink toward 0. This proves the end behavior beyond any finite table.
    • If nearby outputs disagree with the leading term, choose farther inputs. Do not change the leading-term prediction to match a small window.
    input xoutput f(x)−1219728−414441441219728
    x:−12,−4,4,12;f(x):19728,144,144,19728.

    Worked example

    A table on both sides

    For f(x) = x⁴ − 7x2, make a table at x = −12, −4, 4, 12. Use the table and the leading term to describe both ends.

    What it asks. For f(x) = x⁴ − 7x2, make a table at x = −12, −4, 4, 12. Use the table and the leading term to describe both ends.

    Show the steps and the answer

    The plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.

    input xoutput f(x)−1219728−414441441219728
    The same picture again: x: −12, −4, 4, 12; f(x): 19728, 144, 144, 19728.
    1. Plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
    2. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
    1. At x = 4: f(4)=256−112=144.Powers come first: 42 = 16 and 4⁴ = 256.
    2. At x = 12: f(12)=20,736−1,008=19,728.122 = 144, then square 144 to get 20,736.
    3. f(−4)=144 and f(−12)=19,728.Only even powers occur, so opposite inputs give equal outputs.
    4. Both ends rise: as x→−∞,f(x)→∞; as x→∞,f(x)→∞.The leading term x⁴ has even degree and positive coefficient. It decides the trend beyond the table.
    Answer
    • As x → −∞, f(x) → ∞.
    • As x → ∞, f(x) → ∞.
    Double-check Factor to check the arithmetic: x2(x2 − 7). At ±4: 16 · 9 = 144. At ±12: 144 · 137 = 19,728.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Positive outputs at two small inputs prove the right end rises.
    A lower power with a large coefficient can dominate those inputs.
    ✓ Instead: Use the leading term for the conclusion and farther inputs for support.

    Tips and tricks

    • For an exam, practice this method with the answer folded. Check each step against the reason beside it.

    5 How

    1. For f(x) = 50x2 − x3 + 100, use the degree rule to find the highest power, 3. The leading term is −x3 and its coefficient is −1, even though it is written in the middle.
    2. Apply the leading-term rule for end behavior. Use −x3 to predict the two ends, because the lower-power terms become small compared with it far enough from zero. Keep those terms when calculating actual outputs.
    3. Apply the power-function rules to −x3. The negative coefficient sends the right end down: as x → ∞, f(x) → −∞. The odd degree makes the left end opposite: as x → −∞, f(x) → ∞.
    4. Check by substituting into the whole polynomial: f(100) = 500,000 − 1,000,000 + 100 = −499,900, and f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100. The signs match the predicted ends. Here the leading term outweighs the other terms together; f(10) = 4,100 shows why a small input can mislead.

    Finding the end behavior of a polynomial

    1
    Is the polynomial written as a product of brackets?
    YesMultiply the highest-power piece of each bracket. That product is the leading term.
    NoGo on. If the polynomial is a constant c, both ends stay at height c, so stop here.
    ↓
    2
    Is the term with the highest power written first?
    YesThat first term is the leading term.
    NoSearch every term for the highest power. That term is the leading term, wherever it sits.
    ↓
    3
    Is the leading coefficient positive?
    YesRight arm up: as x → ∞, f(x) → ∞.
    NoRight arm down: as x → ∞, f(x) → −∞.
    ↓
    4
    Is the degree even?
    YesThe left arm does the same as the right arm.
    NoThe degree is odd, so the left arm does the opposite of the right arm.
    1. Say what is asked: where does the graph go far to the right (x → ∞) and far to the left (x → −∞)?
    2. Find the leading term, the term with the highest power of x. If the polynomial is a product of brackets, multiply the highest-power piece of each bracket to get it.
    3. Read the leading coefficient, including a hidden 1 or −1, and read the degree. If the degree is 0, the polynomial is a constant c and both ends stay at height c: stop there.
    4. Sign of the leading coefficient gives the right arm: positive up, negative down.
    5. Even degree: the left arm matches the right arm. Odd degree: the left arm is the opposite.
    6. Write the two arrow statements.
    7. Check by putting 100 and −100 (or 10 and −10 when the coefficients are small) into the whole polynomial and looking at the signs; they agree with the arms wherever the leading term outweighs all the other terms together.

    6 Worked example

    Worked example

    A leading term hiding in the middle

    Find the end behavior of f(x) = 50x2 − x3 + 100. In plain words: say where the graph goes far to the right and far to the left.

    input xoutput f(x)−1001500100−106100104100100−499900
    x:−100,−10,10,100;f(x):1500100,6100,4100,−499900.
    Show the steps and the answer
    input xoutput f(x)−1001500100−106100104100100−499900↓ evaluate: input given, read the output below it
    The outputs under −100 and 100 have the signs the leading term −x3 predicts.
    1. Restate the question. As x→∞ (far right), does f(x) go to ∞ or to −∞? Then answer the same for x→−∞ (far left).End behavior is only about the two arms of the graph. It says nothing about the middle.
    2. List each term with its power of x: 50x2 has power 2, −x3 has power 3, and 100 has no x at all.The leading term is the term with the highest power, so every power has to be in view before choosing.
    3. Choose the leading term: −x3. The degree is 3 and the leading coefficient is −1.3 is the highest power present. A bare minus sign in front of x3 means the coefficient is −1.
    4. Set 50x2 and 100 aside for this question.Dividing shows who is bigger: 50x2 ÷ x3 = 50x. Once x passes 50 this is less than 1, and it keeps shrinking, so far out 50x2 is small beside x3. The 100 never grows at all.
    5. Right arm: the leading coefficient −1 is negative, so as x→∞,f(x)→−∞.A large positive number cubed is a large positive number, and multiplying by −1 makes it a large negative: −(1003) = −1,000,000.
    6. Left arm: the degree 3 is odd, so the left arm does the opposite of the right arm. As x→−∞,f(x)→∞.A negative number cubed stays negative, and −1 times a negative is positive: −(−100)3 = −(−1,000,000) = 1,000,000.
    Answer
    • As x → −∞, f(x) → ∞ (left arm up).
    • As x → ∞, f(x) → −∞ (right arm down).
    Double-check Second way: put large inputs into the whole formula, as in the table. Under 100: f(100) = 50 · 10,000 − 1,000,000 + 100 = −499,900, a large negative, so the right arm is heading down. Under −100: f(−100) = 500,000 + 1,000,000 + 100 = 1,500,100, a large positive, so the left arm is heading up. Both agree with the answer. Now look at the column under 10: f(10) = 5,000 − 1,000 + 100 = 4,100, which is positive. Close to 0 the term 50x2 is still ahead, so a small test input would have pointed the right arm the wrong way.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 10

    Leading term first, everything positive in front

    Find the end behavior of f(x) = 3x2 + 5x − 7. In plain words: where do the two arms of the graph point?

    Show the steps and the answer
    1. Find the leading term: 3x2.The powers of x are 2, 1 and 0. The highest is 2.
    2. Read it: leading coefficient 3 (positive), degree 2 (even).These two facts are all that end behavior needs.
    3. Right arm up: as x→∞,f(x)→∞.The leading coefficient is positive, and a large number squared times 3 is large and positive.
    4. Left arm up as well: as x→−∞,f(x)→∞.The degree is even, and an even power of a negative number is positive, so the left arm copies the right arm.
    Answer
    • As x → −∞, f(x) → ∞.
    • As x → ∞, f(x) → ∞.
    • Both arms point up.
    Double-check Use the whole polynomial. f(100) = 3 · 10,000 + 500 − 7 = 30,493. f(−100) = 30,000 − 500 − 7 = 29,493. Both are large and positive, which agrees with both arms heading up.

    Rung 2 of 10

    Odd degree, positive leading coefficient

    Find the end behavior of g(x) = 2x5 − 9x4 + x − 6.

    Show the steps and the answer
    1. Find the leading term: 2x5.The powers are 5, 4, 1 and 0. The highest is 5. The coefficient −9 is larger in size than 2, but its power is lower, so it is not the leading term.
    2. Read it: leading coefficient 2 (positive), degree 5 (odd).Sign and even-or-odd are the two facts needed.
    3. Right arm up: as x→∞,g(x)→∞.The leading coefficient is positive.
    4. Left arm down: as x→−∞,g(x)→−∞.The degree is odd, and an odd power of a negative number is negative, so the left arm does the opposite of the right arm.
    Answer
    • As x → −∞, g(x) → −∞.
    • As x → ∞, g(x) → ∞.
    • Left arm down, right arm up.
    Double-check g(10) = 2 · 100,000 − 9 · 10,000 + 10 − 6 = 200,000 − 90,000 + 4 = 110,004, positive. g(−10) = −200,000 − 90,000 − 10 − 6 = −290,016, negative. The signs match the arrows.

    Rung 3 of 10

    The leading term is written last, with a hidden coefficient

    Find the end behavior of h(x) = 8x + 12x3 − x4.

    Show the steps and the answer
    1. List the powers: 8x has power 1, 12x3 has power 3, −x4 has power 4.The terms are written from lowest power to highest, so the first term is not the leading term.
    2. Leading term: −x4. Leading coefficient −1, degree 4.4 is the highest power, and a bare minus sign means −1.
    3. Right arm down: as x→∞,h(x)→−∞.The leading coefficient is negative.
    4. Left arm down: as x→−∞,h(x)→−∞.The degree is even, so the left arm copies the right arm.
    Answer
    • As x → −∞, h(x) → −∞.
    • As x → ∞, h(x) → −∞.
    • Both arms point down.
    Double-check h(100) = 800 + 12 · 1,000,000 − 100,000,000 = −87,999,200. h(−100) = −800 − 12,000,000 − 100,000,000 = −112,000,800. Both are large and negative. Gotcha: h(10) = 80 + 12,000 − 10,000 = 2,080 is positive, because at x = 10 the term 12x3 is still ahead of x4.

    Rung 4 of 10

    A large coefficient delays the leading term but cannot stop it

    Find the end behavior of p(x) = x4 − 100x3 + 5. Then say roughly how far out the leading term takes over on the right side.

    Show the steps and the answer
    input xoutput p(x)−1011000510−8999510051000900000000005↓ evaluate: input given, read the output below it
    The output is negative under 10, nearly zero under 100, and enormous under 1,000.
    1. Leading term: x4. Leading coefficient 1 (positive), degree 4 (even).4 is the highest power. The coefficient 100 belongs to a lower power.
    2. Both arms up: as x→−∞,p(x)→∞, and as x→∞,p(x)→∞.Positive leading coefficient sends the right arm up, and even degree makes the left arm copy it.
    3. Compare the top two terms by dividing: x4÷(100x3)=x100.This fraction tells how many times bigger the leading term is than the next term.
    4. x100 is more than 1 when x > 100, so the leading term is ahead once x passes 100.Before 100 the term 100x3 is the bigger one. At 100 they tie. After 100 the leading term wins by more and more.
    Answer
    • As x → −∞, p(x) → ∞.
    • As x → ∞, p(x) → ∞.
    • Both arms point up. On the right side the leading term takes over once x passes 100.
    Double-check Read the table. Under 10: p(10) = 10,000 − 100,000 + 5 = −89,995, still negative. Under 100: p(100) = 100,000,000 − 100,000,000 + 5 = 5, the tie. Under 1,000: p(1,000) = 1,000,000,000,000 − 100,000,000,000 + 5 = 900,000,000,005, large and positive. Under −10: p(−10) = 10,000 + 100,000 + 5 = 110,005, positive. Far out on both sides the outputs are positive, as the leading term said.

    Rung 5 of 10

    A product of brackets, multiplied out in full

    Find the end behavior of q(x) = −2x(x − 3)(x + 4).

    Show the steps and the answer
    x²4xx−3x−12−3x+4
    The four products of (x − 3)(x + 4): only the top-left cell, x times x, makes the highest power.
    1. Multiply the two brackets: (x−3)(x+4)=x2+4x−3x−12=x2+x−12.Multiplying out puts every term in view, which makes the leading term easy to read. The area picture shows the four products.
    2. Multiply by −2x: −2x·x2=−2x3,−2x·x=−2x2, and −2x·(−12)=24x. So q(x)=−2x3−2x2+24x.−2x multiplies every term inside, and a negative times a negative gives the positive 24x.
    3. Leading term: −2x3. Leading coefficient −2 (negative), degree 3 (odd).3 is the highest power in the multiplied-out form.
    4. Right arm down: as x→∞,q(x)→−∞. Left arm up: as x→−∞,q(x)→∞.Negative leading coefficient sends the right arm down, and odd degree makes the left arm do the opposite.
    Answer
    • As x → −∞, q(x) → ∞.
    • As x → ∞, q(x) → −∞.
    • Left arm up, right arm down.
    Double-check Use the original bracket form, which never passed through the expansion. q(10) = −20 · 7 · 14 = −1,960, negative. q(−10) = 20 · (−13) · (−6) = 20 · 78 = 1,560, positive. The expanded form agrees: −2,000 − 200 + 240 = −1,960 and 2,000 − 200 − 240 = 1,560.

    Rung 6 of 10

    A product of brackets, using the shortcut

    Find the end behavior of k(x) = (5 − x2)(3x2 + 1) without multiplying everything out.

    Show the steps and the answer
    1. Pick the highest-power piece in each bracket: −x2 in the first, 3x2 in the second.When two brackets are multiplied, the highest power in the result can only come from the highest power in each bracket. Every other product has fewer factors of x.
    2. Multiply those two pieces: (−x2)(3x2)=−3x4. This is the leading term.−1 · 3 = −3, and x2 · x2 is four factors of x, which is x4.
    3. Read it: leading coefficient −3 (negative), degree 4 (even).The numbers 5 and 3 that catch the eye first are both positive, but the leading coefficient is negative.
    4. Both arms down: as x→−∞,k(x)→−∞, and as x→∞,k(x)→−∞.Negative leading coefficient sends the right arm down, and even degree makes the left arm copy it.
    Answer
    • As x → −∞, k(x) → −∞.
    • As x → ∞, k(x) → −∞.
    • Both arms point down.
    Double-check Multiply everything out as a second way: 5 · 3x2 + 5 · 1 − x2 · 3x2 − x2 · 1 = 15x2 + 5 − 3x4 − x2 = −3x4 + 14x2 + 5. The leading term is −3x4, the same as the shortcut gave. With numbers: k(10) = (5 − 100)(300 + 1) = (−95)(301) = −28,595, and k(−10) is the same because every power of x here is even. Both are negative.

    Rung 7 of 10

    Working backward from one arm

    A polynomial has degree 6. Far to the right its graph goes down. What is the sign of its leading coefficient, and where does the graph go far to the left?

    Show the steps and the answer
    1. Restate what is known: the degree is 6, and as x→∞,f(x)→−∞.The question gives the degree and one arm, and asks for the other two facts.
    2. The leading coefficient is negative.The right arm follows the sign of the leading coefficient. For a large positive x, x6 is positive, so the leading term can only be negative if its coefficient is negative.
    3. The left arm also goes down: as x→−∞,f(x)→−∞.6 is even, and an even power of a negative number is positive, so the leading term has the same sign on the left as on the right.
    Answer
    • The leading coefficient is negative.
    • As x → −∞, f(x) → −∞ (the left arm points down too).
    Double-check Test the simplest polynomial that fits, y = −x6. At x = 2 it gives −64 and at x = −2 it gives −64: both down. Try the other sign, y = x6: at x = 2 it gives 64, which goes up on the right and contradicts what was given. So a negative leading coefficient is the only choice.

    Rung 8 of 10

    Brackets raised to powers

    Find the end behavior of f(x) = (2 − x)3(x + 1)2.

    Show the steps and the answer
    1. Highest-power piece of (2−x)3: the piece with x inside the bracket is −x, and (−x)3=−x3.Cubing means three copies of the bracket multiplied together. The highest power comes from taking −x out of each copy: (−x)(−x)(−x) = −x3, negative because three minus signs are multiplied.
    2. Highest-power piece of (x + 1)2: x·x=x2.Two copies of the bracket, taking x from each.
    3. Multiply the pieces: (−x3)(x2)=−x5. This is the leading term.Three factors of x times two factors of x is five factors of x.
    4. Read it: leading coefficient −1 (negative), degree 5 (odd).The degree is the sum of the bracket powers, 3 + 2 = 5.
    5. Right arm down: as x→∞,f(x)→−∞. Left arm up: as x→−∞,f(x)→∞.Negative leading coefficient sends the right arm down, and odd degree makes the left arm do the opposite.
    Answer
    • As x → −∞, f(x) → ∞.
    • As x → ∞, f(x) → −∞.
    • Left arm up, right arm down.
    Double-check Put numbers into the original form. f(10) = (2 − 10)3(10 + 1)2 = (−8)3 · 112 = −512 · 121 = −61,952, negative. f(−10) = (2 + 10)3(−10 + 1)2 = 123 · (−9)2 = 1,728 · 81 = 139,968, positive. The signs match the arrows.

    Rung 9 of 10

    Make an even-degree table

    For f(x) = 2x⁴ − 18x2, make a table at x = −10, −4, 4, 10. Use the table and the leading term to describe both ends.

    What it asks. For f(x) = 2x⁴ − 18x2, make a table at x = −10, −4, 4, 10. Use the table and the leading term to describe both ends.

    Show the steps and the answer

    The plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.

    input xoutput f(x)−1018200−422442241018200
    x:−10,−4,4,10;f(x):18200,224,224,18200.
    1. Plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
    2. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
    1. f(4)=2·256−18·16=512−288=224.Apply both coefficients after evaluating the powers.
    2. f(10)=20,000−1,800=18,200.10⁴ = 10,000 and 102 = 100.
    3. The negative inputs give the same values.Both exponents are even.
    4. As x→−∞,f(x)→∞; as x→∞,f(x)→∞.The leading term 2x⁴ sends both ends up.
    Answer
    • As x → −∞, f(x) → ∞.
    • As x → ∞, f(x) → ∞.
    Double-check Use 2x2(x2 − 9): at ±4 it is 32 · 7 = 224; at ±10 it is 200 · 91 = 18,200. Both forms agree.

    Rung 10 of 10

    Make a table from factors

    For f(x) = (x + 4)(x − 6)(1 − x), make a table at x = −20, −10, 10, 20. Use the table and the leading term to describe both ends.

    What it asks. For f(x) = (x + 4)(x − 6)(1 − x), make a table at x = −20, −10, 10, 20. Use the table and the leading term to describe both ends.

    Show the steps and the answer

    The plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.

    input xoutput f(x)−208736−10105610−50420−6384
    x:−20,−10,10,20;f(x):8736,1056,−504,−6384.
    1. Plan. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
    2. Keep negative inputs in parentheses. Evaluate every term. Read the left columns from 0 outward, not toward 0.
    1. f(−20)=(−16)(−26)(21)=8736. f(−10)=(−6)(−16)(11)=1056.Substitute into each bracket, then multiply. Two negative factors give a positive product.
    2. f(10)=(14)(4)(−9)=−504. f(20)=(24)(14)(−19)=−6384.One negative factor gives a negative product.
    3. The leading term is x·x·(−x)=−x3.The highest power comes from the variable part of every bracket.
    4. As x→−∞,f(x)→∞; as x→∞,f(x)→−∞.Odd degree makes the ends opposite; the negative leading coefficient puts the right end down.
    Answer
    • As x → −∞, f(x) → ∞.
    • As x → ∞, f(x) → −∞.
    Double-check Expansion gives −x3 + 3x2 + 22x − 24. At x = 10: −1000 + 300 + 220 − 24 = −504. At x = −20: 8000 + 1200 − 440 − 24 = 8736. At x = −10: 1000 + 300 − 220 − 24 = 1056, also (−6)(−16)(11) = 96 · 11 = 1056.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: For f(x) = 6 + 2x − x4: the first term is 6, which is positive, so both arms go up.
    The leading term is the term with the highest power, not the term written first. Here the highest power is 4, and its term is −x4.
    ✓ Instead: Leading term −x4: even degree, negative leading coefficient, so both arms go down. Numbers agree: f(10) = 6 + 20 − 10,000 = −9,974 and f(−10) = 6 − 20 − 10,000 = −10,014.
    ✗ Not this: For f(x) = x3 − 900x2: the coefficient 900 is far bigger than 1, so −900x2 controls the ends and both arms go down.
    A coefficient is a fixed number. A higher power keeps gaining: x3 ÷ (900x2) = x900, which passes 1 once x > 900 and never stops growing. Size of coefficient delays the leading term. It does not replace it.
    ✓ Instead: Leading term x3: left arm down, right arm up. f(100) = 1,000,000 − 9,000,000 = −8,000,000 is misleading, but f(1,000) = 1,000,000,000 − 900,000,000 = 100,000,000 is positive, and f(−1,000) = −1,000,000,000 − 900,000,000 = −1,900,000,000 is negative.
    ✗ Not this: Since f(x) = x3 − 10x2 − 100 acts like x3, f(2) is about 23 = 8.
    The leading term wins only far from 0. Near 0 the other terms can be larger. The true value is f(2) = 8 − 40 − 100 = −132, which does not even have the same sign.
    ✓ Instead: Use the leading term for the direction of the arms and nothing else. For an actual output, put the input into every term.
    ✗ Not this: For f(x) = 50x2 − x3 + 100: I tried x = 10 and got 4,100, a positive number, so the right arm goes up.
    10 is not far enough out. At x = 10 the term 50x2 = 5,000 is still larger than x3 = 1,000.
    ✓ Instead: Decide from the leading term −x3: the right arm goes down. If you test with a number, go far past the point where the top two terms tie (here x = 50): f(100) = −499,900.
    ✗ Not this: For f(x) = −x2 + 1,000,000: the million is so large that it holds the graph up, so the arms go up.
    A constant term does not grow. However large it is, x2 passes it: at x = 1,000 they tie, and after that x2 is bigger.
    ✓ Instead: Leading term −x2: both arms go down. f(10,000) = −100,000,000 + 1,000,000 = −99,000,000.

    Tips and tricks

    • Memory cue: the right arm follows the sign of the leading coefficient. Then even, twins (the left arm copies it). Odd, opposites (the left arm does the reverse).
    • Fast check on the leading term alone: put in 10 and −10. For −2x3 that gives −2,000 and 2,000, so right arm down, left arm up.
    • Safer check when coefficients are big: go farther out, to 1,000 and −1,000 or beyond. A small input can sit in the zone where lower terms are still ahead; the leading term decides only where it outweighs all of them together.
    • To compare the leading term with the next term, divide one by the other. For x4 and 100x3 the result is x100, so x4 outweighs 100x3 once x > 100. With more terms, the leading term is in charge only where it outweighs all the others added together.
    • A bare xn has leading coefficient 1, and a bare −xn has leading coefficient −1. Write the 1 in if it helps you see the sign.
    • For a polynomial of degree 1 or more, the constant term never changes where the arms point. It only slides the whole graph up or down by a fixed amount.
    • The leading term tells you about the two arms only. What the graph does in the middle depends on all the terms.

    7 The trap

    Taking the first term on the page as the leading term. In f(x) = 6 + 2x − x4 the first term is 6, but the leading term is −x4, the one with the highest power. Before reading any sign, scan every term for its power of x and circle the highest one. Then read the sign directly in front of that term, including a bare minus sign, which means −1.

    Keep in mind

    • Exam skills: read both ends from the leading term, even when factors or term order hide it.
    • Build a two-sided table of the whole formula and explain why it supports the prediction.

    Flash cards

    Say the answer out loud, then flip.

    Which one term of a polynomial decides its end behavior, and why?
    The leading term, the term with the highest power of x. It is the fast runner in a footrace: far to the right or far to the left it is so much larger in size than the other terms that it alone decides whether the graph heads up or down.
    What does the sign of the leading coefficient tell you, and what does the degree tell you?
    • For a polynomial of degree 1 or more, the sign gives the right arm. Positive: the right arm goes up. Negative: the right arm goes down.
    • The degree gives the left arm. Even: the left arm does the same as the right arm. Odd: the left arm does the opposite.
    • A constant f(x) = c has both ends level at height c.
    Find the end behavior of f(x) = 5 + 3x2 − 2x3.
    • The leading term is −2x3, the term with the highest power, not the 5 written first.
    • The leading coefficient is −2, which is negative, so the right arm goes down.
    • The degree is 3, which is odd, so the left arm does the opposite and goes up.
    • As x → −∞, f(x) → ∞, and as x → ∞, f(x) → −∞.
    How do you check your end behavior arrows with numbers?
    • Put one large positive input and one large negative input into the whole polynomial, far enough out that the leading term outweighs all the other terms together; 100 and −100 do for this one. The signs of the two outputs then show where the arms point.
    • For f(x) = 5 + 3x2 − 2x3: at x = 100 the leading term is −2,000,000 and the rest is only 30,005. f(100) = −1,969,995, which is negative, so the right arm goes down. f(−100) = 2,030,005, which is positive, so the left arm goes up.

    Sources

    1. Jay Abramson. Precalculus 2e, 3.3 Power Functions and Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

    From earlier

    End behavior of a power function

    What does the end behavior of a function tell you?
    Show answer
    It is the view from a long way off, like a person so distant that you only see where the two arms point. It says what the outputs do when x is very far to the right, and what they do when x is very far to the left.

    End behavior of a power function

    For a power function f(x) = kxp with p = 1, 2, 3, ..., which fact sets the right arm and which sets the left arm?
    Show answer
    Right arm: the sign of k. Positive k points it up, negative k points it down.
    Left arm: the power p. Even p makes it match the right arm. Odd p makes it point the opposite way.