Intercepts of a polynomial
Quick review (2 minutes)
The big picture. Find where a polynomial graph meets each axis.
y-intercept: the point (0, f(0)). When the polynomial is written term by term, f(0) is the constant term, the term with no x. x-intercepts: the points (c, 0) for every real number c with f(c) = 0. Zero product property: if A · B = 0, then A = 0 or B = 0.
For f(x) = 2 − 4x − 30, use the y-intercept rule: set x = 0 because every point on the y-axis has that input. f(0) = −30, so the y-intercept is (0, −30).
Use the x-intercept rule: set the output to zero because every point on the x-axis has height zero. Solve 2 − 4x − 30 = 0. Pull out the common factor 2 to get 2( − 2x − 15) = 0; distributing 2 gives back all three terms.
Factor − 2x − 15: look for two numbers whose product is −15, the number with no x, and whose sum is −2, the number in front of x. They are 3 and −5, so − 2x − 15 = (x + 3)(x − 5). Multiplying out checks it: − 5x + 3x − 15 = − 2x − 15.
Apply the zero product property to 2(x + 3)(x − 5) = 0. The factor 2 cannot be zero, so solve x + 3 = 0 or x − 5 = 0. This gives x = −3 or x = 5. Use the x-intercept rule to write (−3, 0) and (5, 0).
Check each input in the original formula: f(−3) = 18 + 12 − 30 = 0 and f(5) = 50 − 20 − 30 = 0. Both points have the required height zero. Check the y-intercept with the factored form too: 2(0 + 3)(0 − 5) = −30.
Find the y-intercept and the x-intercepts of f(x) = 2 − 4x − 30.
y-intercept: (0, −30)
x-intercepts: (−3, 0) and (5, 0)
The most common mistake is reading the number inside a bracket with its sign unchanged. The factor (x + 3) does not give an intercept at 3. It gives −3, because −3 is the value that makes x + 3 equal 0. To avoid it, write the small equation x + 3 = 0 every time, solve it, and plug the answer back in. If the output is not 0, the sign is wrong.
y-intercept: put 0 in for every x and compute. Write the point (0, f(0)).
x-intercepts: write f(x) = 0, with 0 alone on one side.
Pull out anything every term shares: a number, a power of x, or both.
Factor what is left: a square minus a square, or three terms by the multiply and add search.
Set each factor that contains x equal to 0 and solve. Skip any factor that can never be 0.
Write each answer as a point (c, 0), then plug each one back into the original formula.
polynomial
A function built by adding or subtracting pieces, each a number times x to a whole-number power. Simplified without changing where it is defined, it has no x in the bottom of a fraction, under a root, or up in an exponent.
term
One piece of a polynomial, cut off from the others at each plus or minus sign. The sign in front stays with its piece.
coefficient
The number multiplying the x part of a term, sign included. In −5 the coefficient is −5. When no number is written, it is 1, so has coefficient 1.
degree
The highest power of x in a polynomial once it is multiplied out and like terms are combined, counting only terms whose coefficient is not 0. The zero polynomial has no degree. It is not the number of terms, nor the biggest coefficient. A plain number counts as power 0.
leading term
The term with the highest power of x, sign and coefficient included. It need not be written first. When x is far from 0, it outweighs all the other terms.
leading coefficient
The coefficient of the leading term, its sign included. Together with the degree, it decides where the graph's two ends point. In 3 + 2x − 7x⁴ it is −7.
end behavior
What a graph does far to the left and far to the right. For a polynomial of degree 1 or more, each arm heads up forever or down forever.
1 In plain words
The big picture. Find where a polynomial graph meets each axis. Set the input to zero for the y-intercept and the output to zero for x-intercepts. Add these points to the end behavior you already know; next, use turns to narrow the possible degree.
Picture a hiking trail drawn on graph paper. The x-axis is sea level. The y-axis is a signpost standing at the start, where x is 0. The y-intercept is the spot where the trail passes the signpost, and you find its height by putting 0 in for x. The x-intercepts are the spots where the trail touches sea level, so the height there is 0. Finding them means solving f(x) = 0, which is harder, because x sits inside powers. The way in is factoring: rewriting the polynomial as pieces multiplied together. Each piece is called a factor. A product can be 0 only when one of its factors is 0, so each factor hands you one small equation you can solve.
2 Picture it
Reminder
Reminder: Reading an intercept from a formula, Solving a small equation, Multiplying two brackets, Signs when multiplying, Powers of negative numbers, Zero times anything, Degree
- Reading an intercept from a formula. Set x = 0 for the y-intercept and set the output to 0 for the x-intercepts. For y = 2x − 6: x = 0 gives y = −6, and y = 0 gives x = 3.
- Solving a small equation. Undo what is done to x, the same on both sides. x + 3 = 0 becomes x = −3. For 2x − 3 = 0, add 3 to get 2x = 3, then divide by 2 to get x = .
- Multiplying two brackets. Each term in the first bracket multiplies each term in the second: (x + 2)(x + 5) = + 5x + 2x + 10 = + 7x + 10.
- Signs when multiplying. Two negatives multiply to a positive, and a negative times a positive is negative: (−4)(−5) = 20 and 3 · (−5) = −15.
- Powers of negative numbers. An even power of a negative is positive and an odd power is negative: (−3 = 9 and (−2 = −8.
- Zero times anything. Any number times 0 is 0, and every power with n of 1 or more is 0: 0 · 57 = 0 and = 0.
- Degree. The degree of a polynomial is its highest power of x. For + 2 − 8x the degree is 3.
3 Why
Every point on the y-axis has x = 0, so the graph can meet that axis only at (0, f(0)). Every point on the x-axis has y = 0, so the graph meets that axis only where f(x) = 0. Factoring works because of a fact about zero: two numbers that are both not zero never multiply to zero. So when a product is 0, at least one factor must be 0. No other number behaves this way. A product of 6 could be 1 · 6, 2 · 3 or many other pairs, so it fixes neither factor's value; it tells you only that neither factor is 0.
4 The rule
y-intercept: the point (0, f(0)).
When the polynomial is written term by term, f(0) is the constant term, the term with no x. x-intercepts: the points (c, 0) for every real number c with . Zero product property: if , then or .
The same idea, five ways
f has x-intercepts at negative 2 and 2, and its y-intercept is negative 4.
The graph of f(x) = − 4 meets the x-axis where x is −2 and where x is 2, and it crosses the y-axis at a height of −4.
- f(x) = 0 when x = −2 or x = 2
- y-intercept: (0, −4)
- x-intercepts: (−2, 0) and (2, 0)
On a trail map, the y-intercept is the height at the starting signpost, and the x-intercepts are the places where the trail touches sea level.
The same idea, other ways
Put a finger on the y-axis and slide it up or down until it touches the curve. There is one meeting point, and that is the y-intercept. Now slide a finger along the x-axis from left to right. Every place it touches the curve is an x-intercept. For f(x) = − 6x + 5 the finger on the y-axis stops at height 5, and the finger on the x-axis stops twice, at 1 and at 5. The formula agrees: f(0) = 5, and − 6x + 5 = (x − 1)(x − 5).
A scoreboard shows two dials multiplied together. Tonight the board reads 0. You cannot see the dials, but you know one of them is set to 0, because any two settings that are not 0 multiply to something that is not 0. Tomorrow the board reads 12. Now you know almost nothing: the dials could be 3 and 4, or 2 and 6, or 1 and 12. That is why, to solve with factors, you first move everything to one side so the other side reads 0. Zero is the only reading that names a value some dial must hold.
Take f(x) = (x − 1)(x − 4) and try the inputs 0 through 5. In the table, the output row reads 4, 0, −2, −2, 0, 4. The two 0s sit under the inputs 1 and 4. Those are exactly the inputs that make one bracket 0: at x = 1 the product is 0 · (−3), and at x = 4 it is 3 · 0. At every other input both brackets are nonzero, so the product is nonzero. The column for x = 0 holds 4, which is the y-intercept: (−1)(−4) = 4.
For the y-intercept, cover every term that has an x. What is left, the constant term, is the height. For the x-intercepts, read each bracket and flip the sign: (x − 5) gives 5, and (x + 3) gives −3. The flip works only when the bracket is x plus or minus a number. When a number multiplies x, as in (2x − 3), do not guess. Solve 2x − 3 = 0 to get x = .
| Question | y-intercept | x-intercepts |
|---|---|---|
| What is set to 0 | the input: x = 0 | the output: f(x) = 0 |
| What you do | put 0 in for x and compute | factor, set each factor to 0, and keep the real solutions |
| How many there are | exactly one | for a polynomial other than 0: none, one, or several, never more than its degree; for the zero polynomial, every x |
| How it is written | (0, f(0)) | (c, 0) |
| Shortcut | the constant term | each real value that makes a factor 0, a lone x out front included |
Part 1: The y-intercept: put in 0
The y-intercept answers one question: what does the polynomial give when x is 0? Think of a vending machine. You press the button marked 0 and read what drops out. No solving is needed, only arithmetic.
- Formula: the y-intercept is the point (0, f(0)).
- Written term by term: f(0) is the constant term, the term with no x, because every other term has an x and turns into 0.
- No constant term showing: the constant is 0, so the graph passes through (0, 0).
- Factored form: put 0 in every bracket and multiply. For 2(x + 3)(x − 5) that is 2 · 3 · (−5) = −30.
- How many: exactly one, because 0 is always an allowed input for a polynomial and each input has one output.
Worked example
A y-intercept from a formula written term by term
Find the y-intercept of g(x) = 4 − 7 + x − 9.
Show the steps and the answer
- Say what is asked: the input is 0, find the output.The y-intercept is the point of the graph on the y-axis, and there x = 0.
- Replace every x with 0: .Putting in 0 means every x in the formula becomes 0.
- Compute each term: , and 0 stays 0. So .Every power with n of 1 or more is 0, and any number times 0 is 0.
- Write the point: .The first coordinate is the input 0 and the second is the output −9.
Counterexamples
What it is not, and the tempting wrong moves.
Part 2: Already factored: read each bracket
When the polynomial already comes as brackets multiplied together, most of the work is done. Think of a string of lights wired so that one dead bulb turns the whole string dark. Each bracket is a bulb. Find the x that makes one bracket 0, and the whole product is 0.
- Rule: if A · B · C = 0, then A = 0 or B = 0 or C = 0.
- A bracket (x − c) gives the x-intercept c. A bracket (x + c) gives −c.
- A bracket with a number on x, such as (2x − 3), needs its small equation solved: 2x − 3 = 0, so 2x = 3, so x = .
- A number out front other than 0, such as the 2 in 2(x + 3)(x − 5), gives no intercept.
x − 4 = 0 gives x = 4
x + 1 = 0 gives x = −1
2x − 3 = 0 gives x =
Worked example
Three brackets, three x-intercepts
Find the x-intercepts of h(x) = (x − 4)(x + 1)(2x − 3).
Show the steps and the answer
- Say what is asked: the output is 0, find every input that gives it. Write .The graph meets the x-axis only where the output is 0.
- Set the first bracket to 0: . Add 4 to both sides: .If this bracket is 0, the whole product is 0. This finds the one input that makes this bracket 0.
- Set the second bracket to 0: . Subtract 1 from both sides: .The same reasoning applies to each bracket in turn.
- Set the third bracket to 0: . Add 3 to both sides: . Divide both sides by 2: .A number sits on x here, so the sign flip shortcut is not enough. The equation has to be solved.
- Plug each back in. . . At the last bracket is , so the product is 0.Each value makes one bracket 0, and 0 times anything is 0.
Part 3: Pull out what every term shares
Sometimes every term carries the same passenger: a number that divides every coefficient, or an x that appears in every term. Pulling it out front is like noticing that every item on a receipt was bought in packs of 3, and writing 3 × (the list) instead. It is the first thing to try, every time.
- Pattern: ab + ac = a(b + c). The shared piece a goes out front, and each term is divided by a.
- Shared number: when the coefficients are integers, not all 0, use their greatest common factor, the largest positive integer that divides every one of them.
- Shared x: use the lowest power of x that appears in every term.
- When the shared piece contains x, then x = 0 is one of the x-intercepts.
- Test: multiply the front piece back through the bracket. You must get the original polynomial.
Counterexamples
What it is not, and the tempting wrong moves.
Part 4: Three terms: + bx + c
When a three-term polynomial + bx + c factors, it comes from two brackets, (x + m)(x + n). Multiplying them out gives + (m + n)x + mn. So the last number c is the two mystery numbers multiplied, and the middle number b is the same two numbers added. Factoring is that puzzle run backwards: find two numbers that multiply to c and add to b. Some, such as + 1, have no such pair of real numbers.
- Pattern: + bx + c = (x + m)(x + n), where m · n = c and m + n = b.
- c positive: m and n have the same sign, and it is the sign of b.
- c negative: m and n have different signs, and the one farther from 0 takes the sign of b; when b = 0 they are opposites, such as 4 and −4.
- Method, for integers b and c: list the pairs of integers that multiply to c, then pick the pair with the right sum. When no pair has that sum, as for − 2, there is no factoring with integers, and another method is needed.
- If a number other than 1 sits on , first try to pull it out as a shared factor.
Worked example
Multiply to 10, add to 7
Find the x-intercepts of q(x) = + 7x + 10.
Show the steps and the answer
- Say what is asked: the output is 0, find every input that gives it. Write .x-intercepts are where the output is 0.
- Look for two numbers that multiply to 10 and add to 7. The pairs that multiply to 10 are 1 with 10, which add to 11, and 2 with 5, which add to 7. Use 2 and 5.The last number 10 is positive and the middle number 7 is positive, so both numbers are positive.
- Write the brackets: .Multiply back to test: + 5x + 2x + 10 = + 7x + 10.
- Set each bracket to 0. gives . gives .A product is 0 only when one of its factors is 0. These find every input with output 0.
- Plug back into the original: , and .(−2 = 4 and (−5 = 25, since a negative number squared is positive.
Part 5: Two terms: a square minus a square
A square minus a square, such as − 49, has only two terms and no middle term. It still comes from two brackets: the same two things, once with a minus and once with a plus. When you multiply the brackets out, the two middle terms cancel each other, like one step forward and one step back.
- Pattern: − = (a − b)(a + b).
- Why: (a − b)(a + b) = + ab − ab − , and the middle terms ab and −ab cancel.
- Squares to recognize: 1, 4, 9, 16, 25, 36, 49, 64, 81, 100.
- A square plus a positive number, such as + 49, does not split this way, and for real x it is never 0: + 49 is at least 49.
Worked example
A square minus a square
Find the x-intercepts of r(x) = − 49.
Show the steps and the answer
- Say what is asked: the output is 0, find every input that gives it. Write .x-intercepts are where the output is 0.
- Recognize the shape: is a square and is a square, with a minus between them.That is the pattern − with a = x and b = 7.
- Factor: .Multiply back to test: + 7x − 7x − 49 = − 49.
- Set each bracket to 0. gives . gives .A product is 0 only when one of its factors is 0.
- Plug back: and .(−7 = 49, since a negative number squared is positive.
Counterexamples
What it is not, and the tempting wrong moves.
Part 6: Fourth powers and real intercepts
A fourth power can hide two layers of squares. Picture opening a box and finding a smaller box inside. First split a difference of squares in . Then split the factor that is a difference of squares in x. Stop to check whether the other factor can be zero for a real input.
- Why: (A − B)(A + B) = − because the middle products cancel.
- Rule: x⁴ − b⁴ = (x − b)(x + b)( + ). For b ≠ 0, the last factor is positive for every real x.
- Method: find f(0), set f(x) = 0, remove a nonzero common coefficient, factor twice, and substitute the real zeros back.
- Degree limits the number of real intercepts; it does not promise that many.
+ 25 > 0 for real x
Worked example
Factor twice to find real intercepts
Find the y-intercept and every real x-intercept of f(x) = x⁴ − 625.
What it asks. Find the y-intercept and every real x-intercept of f(x) = x⁴ − 625.
Show the steps and the answer
The plan. Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
+ 25 > 0 for real x
- Plan. Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
- Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
- . The y-intercept is .Every positive power of 0 is 0.
- Set f(x) = 0: .An x-intercept is an input where the output is 0. Here the leading coefficient is 1, so there is no number to divide out.
- .This is a difference of squares: ( − (25.
- .Factor the difference of squares again, using 25 = .
- The real zeros are and 5; gives none.For real x, + 25 ≥ 25 > 0, so it cannot equal 0.
- x-intercepts: and (5, 0).Every x-intercept has output 0. Complex zeros are not points on this real graph.
- y-intercept: (0, −625)
- x-intercepts: (−5, 0) and (5, 0)
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- For an exam, practice this method with the answer folded. Check each step against the reason beside it.
Part 7: Build a formula from its intercepts
Reading intercepts from factors can be run backward. Think of each factor as a switch that turns the output to zero at one input. Build one switch for each given intercept. The sign in front points the far ends. The y-intercept checks the height of the whole graph.
- Why: x − r equals 0 when x = r. A product containing that factor also equals 0 there.
- When n distinct zeros are given for degree n, use f(x) = a(x − r₁)···(x − rₙ). These factors use the whole degree.
- Method: write the factors, choose a from the right end if a is restricted to 1 or −1, then substitute 0 to check the given y-intercept.
- If the multiplier is unrestricted, solve for it using the given point. If fewer zeros than the degree are supplied, extra information may be needed.
Worked example
Build the formula from graph clues
A degree-2 polynomial has x-intercepts (−5, 0) and (7, 0), y-intercept (0, −35), and both ends rising. Its leading coefficient is 1 or −1. Find its formula.
What it asks. A degree-2 polynomial has x-intercepts (−5, 0) and (7, 0), y-intercept (0, −35), and both ends rising. Its leading coefficient is 1 or −1. Find its formula.
Show the steps and the answer
The plan. Translate each zero into a factor. Pick the leading sign from the right end, then check the y-intercept.
- Plan. Translate each zero into a factor. Pick the leading sign from the right end, then check the y-intercept.
- Translate each zero into a factor. Pick the leading sign from the right end, then check the y-intercept.
- Start with .Each intercept r requires the factor x − r. Two distinct zeros use the two factors allowed by degree 2.
- Choose .The right end rises, so the leading coefficient is positive. The allowed choices are 1 and −1.
- Check the height: .The given y-intercept must agree; it is a separate requirement.
- Expand: .The middle products are −7x and 5x, which combine to −2x.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- For an exam, practice this method with the answer folded. Check each step against the reason beside it.
5 How
- For f(x) = 2 − 4x − 30, use the y-intercept rule: set x = 0 because every point on the y-axis has that input. f(0) = −30, so the y-intercept is (0, −30).
- Use the x-intercept rule: set the output to zero because every point on the x-axis has height zero. Solve 2 − 4x − 30 = 0. Pull out the common factor 2 to get 2( − 2x − 15) = 0; distributing 2 gives back all three terms.
- Factor − 2x − 15: look for two numbers whose product is −15, the number with no x, and whose sum is −2, the number in front of x. They are 3 and −5, so − 2x − 15 = (x + 3)(x − 5). Multiplying out checks it: − 5x + 3x − 15 = − 2x − 15.
- Apply the zero product property to 2(x + 3)(x − 5) = 0. The factor 2 cannot be zero, so solve x + 3 = 0 or x − 5 = 0. This gives x = −3 or x = 5. Use the x-intercept rule to write (−3, 0) and (5, 0).
- Check each input in the original formula: f(−3) = 18 + 12 − 30 = 0 and f(5) = 50 − 20 − 30 = 0. Both points have the required height zero. Check the y-intercept with the factored form too: 2(0 + 3)(0 − 5) = −30.
Finding the intercepts of a polynomial
- y-intercept: put 0 in for every x and compute. Write the point (0, f(0)).
- x-intercepts: write f(x) = 0, with 0 alone on one side.
- Pull out anything every term shares: a number, a power of x, or both.
- Factor what is left: a square minus a square, or three terms by the multiply and add search.
- Set each factor that contains x equal to 0 and solve. Skip any factor that can never be 0.
- Write each answer as a point (c, 0), then plug each one back into the original formula.
6 Worked example
Worked example
Both kinds of intercept for f(x) = 2 − 4x − 30
Find the y-intercept and the x-intercepts of f(x) = 2 − 4x − 30.
Show the steps and the answer
- Say what is asked. For the y-intercept: the input is 0, find the output. For the x-intercepts: the output is 0, find every input that gives it.The two questions set different things to zero, so they are two separate jobs.
- Put 0 in for x: . The y-intercept is .Every point on the y-axis has x = 0. Each term that has an x becomes 0, so only the constant term −30 is left.
- Write the equation .The graph meets the x-axis only where the output is 0.
- Pull the shared 2 out front: .2 divides all three coefficients: 2, −4 and −30. Multiply back to test it: 2 · = 2, 2 · (−2x) = −4x, 2 · (−15) = −30.
- Find two numbers that multiply to and add to . They are 3 and .The product is negative, so the two signs differ. The sum is negative, so the number farther from 0 carries the minus. The pairs that make 15 are 1 with 15 and 3 with 5. Only 3 and −5 add to −2.
- Write the factored form: .Multiplying out confirms it: (x + 3)(x − 5) = − 5x + 3x − 15 = − 2x − 15, the bracket from the step before.
- Set each factor that contains x equal to 0. gives . gives . The factor 2 is never 0, so it gives nothing.A product is 0 only when one of its factors is 0. These two small equations find every input that makes the output 0.
- Plug each value back into the original formula. . .Plugging back shows that each value really gives an output of 0. It uses the original formula, so it would catch a factoring mistake.
- Write the x-intercepts as points: and (5, 0).An intercept is a point on the graph, and on the x-axis the second coordinate is 0.
- y-intercept: (0, −30)
- x-intercepts: (−3, 0) and (5, 0)
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 11
Already factored
Find the y-intercept and the x-intercepts of f(x) = (x − 2)(x + 6).
Show the steps and the answer
- Say what is asked: first the output when the input is 0, then every input whose output is 0.These are the two intercept questions, and each sets a different thing to 0.
- Put 0 in each bracket: . The y-intercept is .On the y-axis x is 0. A negative times a positive is negative.
- Set each bracket to 0. gives . gives .The polynomial is already a product, and a product is 0 only when one of its factors is 0. This finds every input with output 0.
- Plug back: and .Each value makes one bracket 0, and 0 times anything is 0.
- y-intercept: (0, −12)
- x-intercepts: (2, 0) and (−6, 0)
Rung 3 of 11
Three terms, both numbers negative
Find the y-intercept and the x-intercepts of f(x) = − 9x + 20.
Show the steps and the answer
- Put 0 in for x: . The y-intercept is (0, 20).The terms with x become 0, leaving the constant term.
- Write . Look for two numbers that multiply to 20 and add to .A three-term + bx + c factors as (x + m)(x + n) with m · n = c and m + n = b.
- The product 20 is positive and the sum is negative, so both numbers are negative. Try the pairs: with adds to with adds to with adds to . Use and .Two negatives multiply to a positive and add to a negative, which is what this polynomial needs.
- Write .Multiply back to test: − 5x − 4x + 20 = − 9x + 20.
- Set each bracket to 0: gives , and gives .A product is 0 only when one of its factors is 0. This finds every input with output 0.
- Plug back into the original: and .Both outputs are 0.
- y-intercept: (0, 20)
- x-intercepts: (4, 0) and (5, 0)
Rung 6 of 11
A factor that is never 0
Find the y-intercept and the x-intercepts of f(x) = − 16.
Show the steps and the answer
- Put 0 in for x: . The y-intercept is .The term with x becomes 0, leaving the constant term.
- Write . See it as a square minus a square: and . Factor: . − = (a − b)(a + b) with a = and b = 4.
- The first bracket is again a square minus a square: . So . − splits the same way. Keep factoring until no bracket can be split further.
- Set the first two brackets to 0: gives , and gives .These find the inputs that make those brackets 0.
- Look at . It gives no x-intercept. is never negative, so + 4 is always 4 or more. It can never be 0.
- Plug back into the original: and .An even power of a negative number is positive, so (−2 = 16.
- y-intercept: (0, −16)
- x-intercepts: (2, 0) and (−2, 0)
Rung 7 of 11
A negative out front and treated as one block
Find the y-intercept and the x-intercepts of f(x) = −2 + 20 − 18.
Show the steps and the answer
- Put 0 in for x: . The y-intercept is .The terms with x become 0, leaving the constant term.
- Write and pull out : .−2 divides −2, 20 and −18. Taking the negative out makes the first term inside positive. Each sign inside flips: 20 ÷ (−2) = −10 and −18 ÷ (−2) = 9.
- Treat as one block. Since , the bracket reads bloc block . Two numbers that multiply to 9 and add to are and . So .The three-term method works on any block, not only on a plain x. Test: ( − 1)( − 9) = − 9 − + 9 = − 10 + 9.
- Each bracket is a square minus a square. and . So .1 = and 9 = , so the pattern − = (a − b)(a + b) applies twice.
- Set each bracket to 0: . The out front is never 0.Four brackets contain x, and each gives one small equation. Together they find every input with output 0.
- Plug back into the original: , and . The inputs and give the same outputs.Every power of x in this polynomial is even, so a negative input gives the same result as its positive partner.
- y-intercept: (0, −18)
- x-intercepts: (−3, 0), (−1, 0), (1, 0) and (3, 0)
Rung 8 of 11
A fourth power with a positive factor
Find the y-intercept and every real x-intercept of f(x) = 3x⁴ − 3888.
What it asks. Find the y-intercept and every real x-intercept of f(x) = 3x⁴ − 3888.
Show the steps and the answer
The plan. Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
+ 36 > 0 for real x
- Plan. Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
- Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
- . The y-intercept is .Every positive power of 0 is 0.
- Set . Divide by 3 to get .A nonzero constant factor cannot create or remove a zero.
- .This is a difference of squares: ( − (36.
- .Factor the difference of squares again, using 36 = .
- The real zeros are and 6; gives none.For real x, + 36 ≥ 36 > 0, so it cannot equal 0.
- x-intercepts: and (6, 0).Every x-intercept has output 0. Complex zeros are not points on this real graph.
- y-intercept: (0, −3888)
- x-intercepts: (−6, 0) and (6, 0)
Rung 9 of 11
A fourth power with a negative factor
Find the y-intercept and every real x-intercept of f(x) = −2x⁴ + 512.
What it asks. Find the y-intercept and every real x-intercept of f(x) = −2x⁴ + 512.
Show the steps and the answer
The plan. Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
+ 16 > 0 for real x
- Plan. Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
- Treat x⁴ as the square of . Factor twice, then ask whether each factor can be zero for real x.
- . The y-intercept is (0, 512).Every positive power of 0 is 0.
- Set . Divide by to get .A nonzero constant factor cannot create or remove a zero.
- .This is a difference of squares: ( − (16.
- .Factor the difference of squares again, using 16 = .
- The real zeros are and 4; gives none.For real x, + 16 ≥ 16 > 0, so it cannot equal 0.
- x-intercepts: and (4, 0).Every x-intercept has output 0. Complex zeros are not points on this real graph.
- y-intercept: (0, 512)
- x-intercepts: (−4, 0) and (4, 0)
Rung 10 of 11
Build a downward quadratic
A degree-2 polynomial has x-intercepts (−4, 0) and (9, 0), y-intercept (0, 36), and both ends falling. Its leading coefficient is 1 or −1. Find its formula.
What it asks. A degree-2 polynomial has x-intercepts (−4, 0) and (9, 0), y-intercept (0, 36), and both ends falling. Its leading coefficient is 1 or −1. Find its formula.
Show the steps and the answer
The plan. Use a factor for each zero and a minus sign to make the right end fall.
zero −4 → x + 4
zero 9 → x − 9
right end down → a = −1
f(0) must be 36
- Plan. Use a factor for each zero and a minus sign to make the right end fall.
- Use a factor for each zero and a minus sign to make the right end fall.
- .The two zeros give two linear factors, which use the full degree.
- , so .The right end falls, so the leading coefficient must be negative.
- .This checks the given y-intercept.
- .Expand the two brackets, then apply the minus sign to every term.
Rung 11 of 11
Build a cubic from all its intercepts
A degree-3 polynomial has x-intercepts (−6, 0), (2, 0) and (5, 0), y-intercept (0, −60), left end rising and right end falling. Its leading coefficient is 1 or −1. Find its formula.
What it asks. A degree-3 polynomial has x-intercepts (−6, 0), (2, 0) and (5, 0), y-intercept (0, −60), left end rising and right end falling. Its leading coefficient is 1 or −1. Find its formula.
Show the steps and the answer
The plan. Three distinct intercepts require three factors. After choosing the sign, test x = 0.
zeros −6, 2, 5 → (x + 6)(x − 2)(x − 5)
right end down → multiply by −1
degree 3 → three linear factors
- Plan. Three distinct intercepts require three factors. After choosing the sign, test x = 0.
- Three distinct intercepts require three factors. After choosing the sign, test x = 0.
- .The three distinct zeros require three linear factors. They use the full degree.
- .The right end falls, so use the negative allowed coefficient.
- .This agrees with the required y-intercept.
- . Then . So .Multiply x and then 6 by each term of the quadratic, combine like terms, then apply the minus sign to every term.
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory cue: to find one letter's intercept, set the other letter to zero. For the y-intercept, x is 0. For the x-intercepts, y is 0.
- Check a factoring by multiplying it back out. Check an x-intercept by plugging it into the original formula, not the factored one, because a wrong factoring would agree with itself.
- Sign cue for + bx + c: when c is positive, the two numbers share the sign of b. When c is negative, the signs differ and the number farther from 0 takes the sign of b (when b = 0 the two numbers are opposites, such as 4 and −4).
- Count check: a polynomial of degree n has at most n x-intercepts. Each x-intercept c matches a factor (x − c), and more than n such factors multiplied together would produce a power higher than . Three x-intercepts for a degree 2 polynomial means there is an error.
- End behavior check: if the leading term says both arms point up and the y-intercept is below the x-axis, the graph must meet the x-axis at least once on each side of 0.
- Two views of the y-intercept: it is the constant term when the polynomial is written term by term, and it is what you get by putting 0 in every bracket of the factored form. The two must agree.
7 The trap
The most common mistake is reading the number inside a bracket with its sign unchanged. The factor (x + 3) does not give an intercept at 3. It gives −3, because −3 is the value that makes x + 3 equal 0. To avoid it, write the small equation x + 3 = 0 every time, solve it, and plug the answer back in. If the output is not 0, the sign is wrong.
Keep in mind
- Exam skills: find both kinds of intercepts, keep the zero from a common x factor, and factor fourth powers.
- Build a polynomial from its intercepts, degree, end directions and y-intercept. Accept equivalent factored or expanded formulas.
Flash cards
Say the answer out loud, then flip.
How do you find the y-intercept of a polynomial f(x)?
Think of the graph as a hiking trail and the x-axis as sea level. What equation finds the x-intercepts, and why that one?
A polynomial factors as (x + 3)(x − 2). What are its x-intercepts?
- (−3, 0) and (2, 0).
- Write each small equation: x + 3 = 0 gives x = −3, and x − 2 = 0 gives x = 2.
- The sign flips from what you see in the bracket. Plug each answer back in. The output must be 0.
Why can you set each factor to 0 when the product equals 0, but read no factor off when the product is some other number such as 6?
- Two numbers that are both not zero never multiply to zero. So a product of 0 means at least one factor is 0, and each factor gives one small equation to solve. A product of 6 could be 1
- 6, 2
- 3, 4
- 1.5 or endless other pairs, so it pins neither factor to a value; you learn only that neither one is 0.