Quarry School

Finding every zero, step by step

Subject: MathematicsLeans on: Synthetic divisionLeans on: The Remainder TheoremLeans on: The Factor TheoremLeans on: The Rational Zero TheoremLeans on: Factors of a whole numberLeans on: The quadratic formulaLeans on: Subtracting a negativeLeans on: Simplifying a square rootLeans on: Square roots of negative numbersLeans on: Dividing a ± fractionLeans on: Zero product propertyLeans on: Powers of −1Leans on: Factoring out xLeans on: A whole number times a fractionLeans on: Multiplying polynomialsLeans on: Squaring a sum
Level 1 · FoundationsAbout 42 min read2 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Leans on

    Quick review (2 minutes)

    In plain words

    The big picture: Find zeros by testing candidates and solving the smaller polynomial left after division.

    Rule

    If c is a zero of f, then f(x) = (x − c)·q(x), and the zeros of f are c together with the zeros of the quotient q(x). Take f with integer coefficients and a nonzero constant term (if the constant term is 0, factor out x and work with what is left). Every rational zero of a quotient is also a rational zero of f, so keep testing the same candidates ±factoroftheconstanttermfactoroftheleadingcoefficient of f on each quotient. When the quotient is a quadratic, the quadratic formula gives its last two zeros. If no candidate is a zero of a quotient of degree 3 or more, that quotient has no rational zero, and its zeros need another method.

    Step

    1. For f(x) = x3 − 8x + 8, write coefficients 1, 0, −8, 8. Synthetic division needs the zero placeholder for x2. The nonzero constant 8 means x is not a factor.

    2. Use the Rational Zero Theorem to list ±1, ±2, ±4, ±8: factors of the constant 8 over factors of the leading coefficient 1. Every rational zero must be on this list.

    3. Test by substitution: f(1) = 1 and f(−1) = 15. Neither output is 0, so neither input is a zero. By the Factor Theorem, neither x − 1 nor x + 1 is a factor.

    4. Test 2 by synthetic division. Bring down 1; multiply by 2 and add to get 0 + 2 = 2, −8 + 4 = −4, and 8 − 8 = 0. The Remainder Theorem gives f(2) = 0, and the Factor Theorem gives f(x) = (x − 2)(x2 + 2x − 4).

    5. Set the quadratic factor equal to zero. The zero-product rule says each factor can supply zeros. Use the quadratic formula with a = 1, b = 2, c = −4: x = −2±202 = −1 ± 5. It solves the remaining factor without more candidate tests.

    6. Keep 2 from division and both values −1 + 5 and −1 − 5 from the formula. The zero-product rule makes this the full list because every factor has been solved.

    7. Check by expansion: (x − 2)(x2 + 2x − 4) = x3 − 8x + 8. Substituting either −1 ± 5 into x2 + 2x − 4 gives 0, and substituting 2 into x − 2 gives 0. Thus every listed input makes the original product zero.

    Strategy

    1. Factor out any common power of x and record zero with its multiplicity.

    2. List rational candidates from constant factors over leading factors, with both signs.

    3. Test candidates by synthetic division. A zero remainder finds a zero.

    4. Record the zero and work on the quotient. Test a successful zero again for repeats.

    5. Finish a quadratic by factoring or the formula; solve a linear quotient directly. If no candidate works at higher degree, use another method.

    6. Combine all zeros and check the factors by expansion.

    Question

    Find every zero of f(x) = x3 − 8x + 8, real or complex. In plain words: find every input x that makes the output 0, and stop only when none is left.

    Answer

    x = 2
    x = −1 + 5 (≈ 1.24, rounded)
    x = −1 − 5 (≈ −3.24, rounded)

    Trap

    Wrong: keep testing the original polynomial. Right: test the quotient and keep every zero already found.

    Strategy

    1. List rational candidates and test until a remainder is zero.

    2. Record that zero and replace the polynomial with the quotient.

    3. Test the same zero on the quotient. Each successful division adds one to its multiplicity.

    4. Finish the remaining quadratic or linear equation.

    5. Add the multiplicities to check the degree, then expand the factors.

    Strategy

    1. Set u equal to x squared.

    2. Solve the resulting quadratic for every value of u.

    3. Replace each u with x squared.

    4. Take both square roots in each equation. Negative values give imaginary roots.

    5. Substitute the roots into the original quartic and count four with multiplicity.

    Strategy

    1. Name the unknown length and express the other two lengths using it.

    2. Multiply width, length, and height, then set the product equal to the volume.

    3. Move every term to one side and find the polynomial zeros.

    4. Keep only real values that make every length positive.

    5. Find all requested dimensions and multiply them to check the volume.

    Term

    Remainder Theorem

    Definition

    When you divide a polynomial f(x) by x − c, the remainder equals f(c), the value you get by plugging c into f.

    Term

    Factor Theorem

    Definition

    x − c is a factor of f(x) exactly when f(c) = 0. Finding a zero and finding a factor are the same discovery.

    Term

    Rational Zero Theorem

    Definition

    With integer coefficients, every zero that is a fraction has the form ±pq, where p is a factor of the constant term and q is a factor of the leading coefficient.

    1 In plain words

    The big picture: Find zeros by testing candidates and solving the smaller polynomial left after division. Keep each zero you find. This combines the candidate list with the Factor Theorem; the next lesson explains how to count all zeros, including complex ones.

    Think of a zero as a key that opens one box and leaves a smaller box inside. Each successful synthetic division removes one linear factor. Keep the zero and work on the quotient. A quadratic can be finished with factoring or the quadratic formula. A higher-degree quotient with no rational zero needs another method.

    2 Picture it

    input xoutput f(x)−8−440−4−24−216−11511204408456↑ solve: output given, read every input above it
    The eight candidates of x3 − 8x + 8 and their outputs.

    Reminder

    Reminder: Synthetic division, The Remainder Theorem, The Factor Theorem, The Rational Zero Theorem, Factors of a whole number, The quadratic formula, Subtracting a negative, Simplifying a square root, Square roots of negative numbers, Dividing a ± fraction, Zero product property, Powers of −1, Factoring out x, A whole number times a fraction, Multiplying polynomials, Squaring a sum
    • Synthetic division. Write every coefficient, top power first, with 0 for a missing power; bring the first down, multiply by the number in the box, add, repeat. For x3 − 8x + 8 divided by x − 2: top row 1, 0, −8, 8 gives bottom row 1, 2, −4, 0.
    • The Remainder Theorem. The last number in the bottom row is f(c): dividing x3 − 8x + 8 by x − 1 leaves 1, and f(1) = 1 − 8 + 8 = 1.
    • The Factor Theorem. Remainder 0 means x − c is a factor, and the rest of the bottom row is the other factor: x3 − 8x + 8 = (x − 2)(x2 + 2x − 4).
    • The Rational Zero Theorem. Every rational zero is ±factoroftheconstanttermfactoroftheleadingcoefficient: for 2x3 + x2 − 2x − 6 the list is ±1, ±2, ±3, ±6, ±12, ±32.
    • Factors of a whole number. List them in pairs that multiply to the number: 12 = 1 × 12 = 2 × 6 = 3 × 4, so the factors are 1, 2, 3, 4, 6, 12, and with signs ±1, ±2, ±3, ±4, ±6, ±12.
    • The quadratic formula. ax2 + bx + c = 0 has x = −b±b2−4ac2a: for x2 − 2x − 15 = 0, x = 2±642, so x = 5 or x = −3.
    • Subtracting a negative. Subtracting a negative adds: 4 − (−16) = 4 + 16 = 20.
    • Simplifying a square root. Pull out the largest square factor: 20 = 4·5 = 25.
    • Square roots of negative numbers. i = −1 and i2 = −1, so −16 = 16·−1 = 4i.
    • Dividing a ± fraction. Divide every term on top by the bottom: −2±252 = −1 ± 5.
    • Zero product property. If A·B = 0, then A = 0 or B = 0: (x − 2)(x2 + 2x − 4) = 0 means x − 2 = 0 or x2 + 2x − 4 = 0.
    • Powers of −1. An even power of −1 is 1 and an odd power is −1: (−1)4 = 1 and (−1)3 = −1.
    • Factoring out x. When every term has an x, pull one out front: x4 − x2 − 6x = x(x3 − x − 6). Multiply back to check.
    • A whole number times a fraction. Multiply by the top, then divide by the bottom: 4 × 32 = 122 = 6.
    • Multiplying polynomials. Multiply every term of one piece by every term of the other, then combine like terms: (x − 2)(x2 + 2x − 4) = x3 + 2x2 − 4x − 2x2 − 4x + 8 = x3 − 8x + 8.
    • Squaring a sum. (a+b)2=a2+2ab+b2:(1+2i)2=1+4i+4i2=1+4i−4=−3+4i.

    3 Why

    A zero remainder proves f(x) = (x − c)q(x). A product is zero when at least one factor is zero, so its zeros are c and the zeros of q. Dividing lowers the degree by one. Solving each quotient keeps every zero and makes the next search smaller.

    4 The rule

    If c is a zero of f, then f(x)=(x−c)·q(x), and the zeros of f are c together with the zeros of the quotient q(x).

    Take f with integer coefficients and a nonzero constant term (if the constant term is 0, factor out x and work with what is left). Every rational zero of a quotient is also a rational zero of f, so keep testing the same candidates ±factoroftheconstanttermfactoroftheleadingcoefficient of f on each quotient. When the quotient is a quadratic, the quadratic formula gives its last two zeros. If no candidate is a zero of a quotient of degree 3 or more, that quotient has no rational zero, and its zeros need another method.

    The same idea, five ways

    Say it

    Find all the numbers that make the polynomial come out to 0, and miss none.

    Write it

    The zeros of f are all the inputs x, real or complex, for which f(x) = 0; finding every zero means listing all of them.

    In math
    • f(x) = 0
    • {x | f(x) = 0}
    • f(x) = (x − c)·q(x): the zeros of f are c and the zeros of q(x)
    • graph words: the real zeros are the x-intercepts of y = f(x)
    Like

    Like opening nested boxes: each key that turns opens one box and leaves a smaller one, and the last box opens with a master key.

    See it
    2x³ − 8x + 8inputoutput0
    A zero is an input the polynomial turns into 0: 2 goes in and 0 comes out.

    The same idea, other ways

    As a picture

    Think of stairs. Each zero found takes the top power down one step: x3 − 8x + 8 divided by x − 2 steps down to x2 + 2x − 4. At x2 the stairs end, and the quadratic formula carries you the rest of the way, to −1 + 5 and −1 − 5.

    x3 − 8x + 8 (top power 3)

    divide by x − 2: zero 2

    x2 + 2x − 4 (top power 2)

    formula: −1 + 5 and −1 − 5

    all zeros: 2, −1 + 5, −1 − 5

    As a story

    A detective has a list of suspects, and more than one of them may be guilty. Each interview either clears a suspect (a remainder that is not 0) or catches one (remainder 0). Every catch shrinks the case: the quotient is a smaller mystery with fewer people left to explain. A cleared suspect stays cleared, but a caught one is questioned again, since one person can be behind two of the crimes. When the case is down to a quadratic, the formula names the last two at once.

    As a rule of thumb

    Test, divide, shrink, repeat; at x2, use the formula. To see the work ahead, count the steps down: a polynomial whose top power is n needs n − 2 successes (pulling out x counts as one) before the formula can take over. A cubic needs 1; a polynomial with top power 4 needs 2.

    Why nothing is missed

    After one success, x3 − 8x + 8 = (x − 2)(x2 + 2x − 4). A product is 0 only when one of its pieces is 0. The piece x − 2 is 0 only at x = 2. The piece x2 + 2x − 4 is a quadratic, and the formula finds every x that makes it 0. So 2 and the formula's two answers are all the zeros: no other input can make the product 0.

    Part 1: Repeated zeros in a quartic

    A repeated zero is like a key that opens two locks in a row. Finding it once removes one factor. Testing it on the smaller polynomial tells you whether another copy remains.

    • Multiplicity counts copies of x − c. Divide the quotient again by the same factor to detect a repeat.
    • A quartic has four complex zeros counting repeats. A repeated real zero counts toward those four.

    degree 4 → divide by x − 4

    degree 3 → try x − 4 again

    degree 2 → solve x2 − 6 = 0

    2 + 1 + 1 = 4 zeros counted with repeats

    What it asks: Find repeated zeros and their multiplicities.

    1. List rational candidates and test until a remainder is zero.
    2. Record that zero and replace the polynomial with the quotient.
    3. Test the same zero on the quotient. Each successful division adds one to its multiplicity.
    4. Finish the remaining quadratic or linear equation.
    5. Add the multiplicities to check the degree, then expand the factors.

    Worked example

    Find a repeated zero before using the formula

    Find all real zeros of f(x) = x4 − 8x3 + 10x2 + 48x − 96. State each multiplicity.

    What it asks. Find repeated zeros and their multiplicities.

    Show the steps and the answer

    The plan. Test each successful zero again on the quotient, then solve what remains.

    1. Plan. Test each successful zero again on the quotient, then solve what remains.
    2. After a successful division, try the same number on the quotient before crossing it off.
    1. Test c=4. The first bottom row is 1, −4,−6, 24, 0.This candidate comes from factors of the constant over factors of the leading coefficient. Remainder 0 proves it is a zero.
    2. Test 4 on the quotient. The next bottom row is 1, 0, −6, 0.Use the shorter row without its last remainder. A second remainder of 0 means the same factor occurs again.
    3. After two divisions, f(x)=(x−4)2(x2−6).Keep both copies of the known factor. With a fractional zero, move the numerical scale into those factors.
    4. Solve x2−6=0: x=6 or x=−6.Both opposite numbers square to the same positive value.
    5. The zero 4 counts twice. Each square root counts once.The last quadratic is nonzero at the repeated zero. The total 2 + 1 + 1 matches degree 4.
    Answer
    • x = 4, multiplicity 2
    • x=6
    • x=−6
    Double-check Expanding (x − 4)2(x2 − 6) returns x4 − 8x3 + 10x2 + 48x − 96. The factor for each listed zero vanishes; the two successive divisions also confirm the repeated factor. Equivalent exact forms count: list the zeros in any order, or use ± for a pair. For a repeated zero, give its multiplicity or list it twice. Write sqrt(2) for 2 if typing; i2 and 2i mean the same number.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Remove a successful candidate from the list forever.
    That skips any repeated copy of its factor.
    ✓ Instead: Test it on the quotient; stop repeating only when the remainder is nonzero.

    Tips and tricks

    • Trick: test a successful zero on the next quotient before trying a new candidate.

    Part 2: A quartic that is quadratic in x squared

    Some quartics have no rational zero to start synthetic division. If only x⁴, x2 and a constant appear, treat x2 as one package. Calling that package u turns the equation into a familiar quadratic.

    • Write u = x2, so x⁴ = u2. Solve the quadratic in u, then replace u by x2.
    • For a positive value d, x2 = d gives ±d. For a negative value −d, it gives ±id.
    • All real zeros excludes the nonreal pair. All complex zeros includes real numbers too.

    x⁴−3x2−10=0

    u=x2→u2−3u−10=0

    u = 5 or u = −2

    x = ±5 or x = ±i2

    What it asks: Solve a quartic made of x to the fourth, x squared, and a constant.

    1. Set u equal to x squared.
    2. Solve the resulting quadratic for every value of u.
    3. Replace each u with x squared.
    4. Take both square roots in each equation. Negative values give imaginary roots.
    5. Substitute the roots into the original quartic and count four with multiplicity.

    Worked example

    A quartic with no rational zero

    Find every complex zero, including the real zeros, of f(x) = x4 − 3x2 − 10.

    What it asks. Solve a quartic made of x to the fourth, x squared, and a constant.

    Show the steps and the answer

    The plan. Solve for x squared first, then take both square roots of each value.

    1. Plan. Solve for x squared first, then take both square roots of each value.
    2. Rename x2 as u, solve the quadratic in u, then solve each equation x2 = u.
    1. Set u=x2. Then x4=u2, so solve u2−3u−10=0.The powers 4, 2 and 0 have the same pattern as a quadratic. Renaming x2 makes that pattern visible.
    2. (u−5)(u+2)=0. Thus u−5=0 or u+2=0, giving u=5 or u=−2.The factors multiply to the quadratic. A product equals zero when at least one factor equals zero. These are values of u; solve for x next.
    3. x2=5 gives ±5; x2=−2 gives ±i2.Replace u with x2. Both signs are needed when taking square roots. A negative squared value uses i2 = −1.
    4. The factorization over real coefficients is (x2−5)(x2+2).It shows both squared equations together. Their four zeros account for degree 4.
    Answer
    • x=5
    • x=−5
    • x=i2
    • x=−i2
    Double-check Expand (x2 − 5)(x2 + 2) to recover x4 − 3x2 − 10. Squaring each listed zero gives one of the two solved u values, so substitution makes a factor 0. Equivalent exact forms count: list the zeros in any order, or use ± for a pair. For a repeated zero, give its multiplicity or list it twice. Write sqrt(2) for 2 if typing; i2 and 2i mean the same number.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Report 5 and −2 as the zeros of x⁴ − 3x2 − 10.
    Those are values of x2, not values of x.
    ✓ Instead: Solve x2 = 5 and x2 = −2 to get four zeros.

    Tips and tricks

    • Trick: when only even powers appear, try u = x2 before listing rational candidates.

    Part 3: A volume equation

    A box turns a picture into an equation: one layer holds width times length square units, and the height counts the layers. Multiplying all three lengths gives volume. If the lengths share a variable, the result can be cubic.

    • Name one length with a letter. Write the other two lengths from the words of the problem.
    • Volume = width × length × height. Set that product equal to the given volume, then move every term to one side so the other side is 0.
    • Solve for the zeros. Keep only a real, positive value, then report all three lengths and check their product.

    One layer: width × length

    Box: width × length × height

    w(w + 3)(2w) = 224

    w = 4 → dimensions 4, 7, 8

    What it asks: Find the dimensions from a volume.

    1. Name the unknown length and express the other two lengths using it.
    2. Multiply width, length, and height, then set the product equal to the volume.
    3. Move every term to one side and find the polynomial zeros.
    4. Keep only real values that make every length positive.
    5. Find all requested dimensions and multiply them to check the volume.

    Worked example

    A volume problem becomes a zero search

    A rectangular box has a volume of 224 cubic units. Its length is 3 units more than its width. Its height is twice its width. Find the width, the length and the height.

    What it asks. Find the dimensions from a volume.

    Show the steps and the answer

    The plan. Write a product of three lengths, solve the volume equation, and keep physical dimensions.

    1. Plan. Write a product of three lengths, solve the volume equation, and keep physical dimensions.
    2. Call the width w. Write the length and the height from the words, multiply the three, and set the product equal to the volume.
    1. Let w be the width. Then the length is w+3 and the height is 2w, with w > 0.Both other lengths are described from one length, so one letter covers all three. A length must be positive.
    2. The three lengths multiply to the volume, so w(w+3)(2w)=224.The volume of a box is width × length × height. The order of the three does not change the product.
    3. w·2w=2w2, and 2w2(w+3)=2w3+6w2. So 2w3+6w2=224, which gives 2w3+6w2−224=0.Multiply out the left side, then subtract the volume from both sides so one side is 0. Now the unknown length is a zero of a polynomial.
    4. Divide every term by 2: w3+3w2−112=0. Test whole numbers that divide 112. w=1 gives 1+3−112=−108. w=2 gives 8+12−112=−92. w=4 gives 64+48−112=0.Dividing an equation by 2 keeps its solutions and makes the numbers smaller. By the Rational Zero Theorem, a whole-number zero must divide the constant 112.
    5. Synthetic division at 4 on 1, 3, 0, −112 gives the bottom row 1, 7, 28, 0. The other factor is w2+7w+28.Remainder 0 confirms the zero. The quotient holds any other solutions.
    6. For w2+7w+28 the discriminant is 72−4(1)(28)=49−112=−63. So w=4 is the only real solution.A negative discriminant means the quadratic has no real zeros. A length must be a real positive number.
    7. Width 4. Length 4+3=7. Height 2·4=8.The question asks for all three lengths, not only the letter.
    Answer
    • Width: 4
    • Length: 7
    • Height: 8
    Double-check 4 × 7 × 8 = 224, the given volume. The length 7 is 3 more than the width 4, and the height 8 is twice 4.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Report every algebraic zero as a possible length.
    A length must be real and positive.
    ✓ Instead: Keep only values that make every dimension positive and satisfy the original volume equation.

    Tips and tricks

    • Check the dimensions in the original volume equation; the product must match the given volume.

    5 How

    1. For f(x) = x3 − 8x + 8, write coefficients 1, 0, −8, 8. Synthetic division needs the zero placeholder for x2. The nonzero constant 8 means x is not a factor.
    2. Use the Rational Zero Theorem to list ±1, ±2, ±4, ±8: factors of the constant 8 over factors of the leading coefficient 1. Every rational zero must be on this list.
    3. Test by substitution: f(1) = 1 and f(−1) = 15. Neither output is 0, so neither input is a zero. By the Factor Theorem, neither x − 1 nor x + 1 is a factor.
    4. Test 2 by synthetic division. Bring down 1; multiply by 2 and add to get 0 + 2 = 2, −8 + 4 = −4, and 8 − 8 = 0. The Remainder Theorem gives f(2) = 0, and the Factor Theorem gives f(x) = (x − 2)(x2 + 2x − 4).
    5. Set the quadratic factor equal to zero. The zero-product rule says each factor can supply zeros. Use the quadratic formula with a = 1, b = 2, c = −4: x = −2±202 = −1 ± 5. It solves the remaining factor without more candidate tests.
    6. Keep 2 from division and both values −1 + 5 and −1 − 5 from the formula. The zero-product rule makes this the full list because every factor has been solved.
    7. Check by expansion: (x − 2)(x2 + 2x − 4) = x3 − 8x + 8. Substituting either −1 ± 5 into x2 + 2x − 4 gives 0, and substituting 2 into x − 2 gives 0. Thus every listed input makes the original product zero.

    What it asks: Find every zero, counting repeats.

    1
    Does a rational candidate give remainder zero?
    YesRecord it and divide it out.
    NoTry the next candidate; if none works, use another method.
    ↓
    2
    Is the quotient quadratic?
    YesFactor or use the formula.
    NoSolve a linear quotient directly, or continue reducing higher degrees.
    1. Factor out any common power of x and record zero with its multiplicity.
    2. List rational candidates from constant factors over leading factors, with both signs.
    3. Test candidates by synthetic division. A zero remainder finds a zero.
    4. Record the zero and work on the quotient. Test a successful zero again for repeats.
    5. Finish a quadratic by factoring or the formula; solve a linear quotient directly. If no candidate works at higher degree, use another method.
    6. Combine all zeros and check the factors by expansion.

    6 Worked example

    Worked example

    Every zero of x3 − 8x + 8

    Find every zero of f(x) = x3 − 8x + 8, real or complex. In plain words: find every input x that makes the output 0, and stop only when none is left.

    What it asks. Find every zero, counting repeats.

    Show the steps and the answer

    The plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.

    Test 2: divide x3 + 0x2 − 8x + 8 by x − 2

    Top row: 1, 0, −8, 8

    Added in: 2, 4, −8

    Bottom row: 1, 2, −4, 0

    Remainder 0, so 2 is a zero

    Quotient: x2 + 2x − 4

    1. Plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.
    1. Write f(x) with every power, top power first: x3+0x2−8x+8. The coefficients are 1, 0, −8, 8.There is no x2 term, so its slot holds a 0. Synthetic division lines the numbers up by power, and an empty slot would push every number into the wrong column.
    2. The constant term is 8, not 0, so there is no x to pull out. List the candidates: the factors of 8 are 1, 2, 4, 8, and the leading coefficient 1 has only the factor 1. Candidates: ±1,±2,±4,±8.The Rational Zero Theorem: every rational zero is ±factorof8factorof1, and dividing by 1 changes nothing. No rational zero can be off this list.
    3. Test 1 by plugging in: f(1)=1−8+8=1.1 is the quickest candidate to test. The output is 1, not 0, so 1 is not a zero: cross it off.
    4. Test −1: f(−1)=(−1)3−8(−1)+8=−1+8+8=15.(−1)3 = −1, and −8 times −1 is +8. The output is 15, not 0, so −1 is not a zero.
    5. Test 2 with synthetic division. Top row 1, 0, −8, 8. Bring down the 1. 1×2=2, and 0+2=2. 2×2=4, and −8+4=−4. −4×2=−8, and 8+(−8)=0. Bottom row: 1, 2, −4, 0.By the Remainder Theorem the last number in the bottom row is f(2). It is 0, so 2 is a zero. Testing with synthetic division in place of plugging in hands us the quotient at the same time.
    6. Read the bottom row as a factorization: x3−8x+8=(x−2)(x2+2x−4).The Factor Theorem: remainder 0 means x − 2 is a factor. The numbers 1, 2, −4 are the quotient, one power lower than x3, so they mean x2 + 2x − 4.
    7. The quotient is a quadratic, so stop testing. Set x2+2x−4=0, with a=1,b=2,c=−4.This finds the inputs that make the second factor 0, and any input that makes one factor 0 makes the whole product 0. The formula finishes any quadratic, so the rest of the list (−2, ±4, ±8) never needs testing. Here c is the quadratic's constant term, not a tested number.
    8. Find the discriminant: b2−4ac=22−4(1)(−4)=4+16=20.Subtracting −16 is adding 16. The result is positive but not a perfect square, so both zeros are real and carry a square root.
    9. Use the formula: x=−2±202=−2±252=−1±5.20 = 4·5 = 25. Then divide each term on top by the 2 underneath: −2 ÷ 2 = −1 and 25 ÷ 2 = 5.
    10. Gather the zeros: 2 from testing, then −1+5 and −1−5 from the formula.The product (x − 2)(x2 + 2x − 4) is 0 only when one of its pieces is 0, so these three numbers are every zero.
    Answer
    • x = 2
    • x = −1 + 5 (≈ 1.24, rounded)
    • x = −1 − 5 (≈ −3.24, rounded)
    Double-check Multiply the pieces back: (x − 2)(x2 + 2x − 4) = x3 + 2x2 − 4x − 2x2 − 4x + 8 = x3 − 8x + 8, the polynomial we started with. Then plug −1 + 5 into the quadratic: (−1 + 5)2 = 1 − 25 + 5 = 6 − 25, and 6 − 25 + 2(−1 + 5) − 4 = 6 − 25 − 2 + 25 − 4 = 0.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 13

    Rung 1: the first test works

    Find every zero of f(x) = x3 − 3x2 − 13x + 15, real or complex: every input that makes the output 0.

    What it asks. Find every zero, counting repeats.

    Show the steps and the answer

    The plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.

    Test 1: divide by x − 1

    Top row: 1, −3, −13, 15

    Added in: 1, −2, −15

    Bottom row: 1, −2, −15, 0

    Quotient: x2 − 2x − 15

    1. Plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.
    1. List the candidates. The factors of 15 are 1, 3, 5, 15, and the leading coefficient is 1. Candidates: ±1,±3,±5,±15.The Rational Zero Theorem: with leading coefficient 1, the candidates are ± the factors of the constant term.
    2. Test 1 by adding the coefficients: 1−3−13+15=0.Every power of 1 is 1, so f(1) is the sum of the coefficients. The sum is 0, so 1 is a zero.
    3. Divide by x−1. Top row 1, −3,−13, 15. Bring down 1. 1×1=1, and −3+1=−2. −2×1=−2, and −13+(−2)=−15. −15×1=−15, and 15+(−15)=0. Bottom row: 1, −2,−15, 0.The remainder 0 confirms the zero, and 1, −2, −15 is the quotient x2 − 2x − 15. So f(x) = (x − 1)(x2 − 2x − 15).
    4. Set x2 − 2x − 15 = 0, with a = 1, b = −2, c = −15. Discriminant: (−2)2−4(1)(−15)=4+60=64.This finds the inputs that make the second factor 0, and the formula finishes any quadratic. 64 = 82, a perfect square, so these zeros are whole numbers.
    5. x=2±82, so x=102=5 or x=−62=−3.−b is 2 and 64 = 8. Take the + for one answer and the − for the other.
    6. Gather: 1, 5, −3.One zero from testing and two from the formula.
    Answer
    • x = 1
    • x = 5
    • x=−3
    Double-check Plug the formula's answers into f: f(5) = 125 − 75 − 65 + 15 = 0 and f(−3) = −27 − 27 + 39 + 15 = 0.

    Rung 2 of 13

    Rung 2: several candidates fail first

    Find every zero of f(x) = x3 + x2 − 7x − 3, real or complex: every input that makes the output 0.

    What it asks. Find every zero, counting repeats.

    Show the steps and the answer

    The plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.

    input xoutput f(x)−30−141−8312↑ solve: output given, read every input above it
    Only the column under −3 holds a 0: −3 is the one candidate that is a zero.
    1. Plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.
    1. List: the factors of 3 are 1 and 3, and the leading coefficient is 1. Candidates: ±1,±3.The Rational Zero Theorem: ± the factors of the constant term over the factors of 1.
    2. Test 1: 1+1−7−3=−8. Test −1: −1+1+7−3=4. Test 3: 27+9−21−3=12.In the table, the columns under 1, −1 and 3 hold −8, 4 and 12, none of them 0. Cross all three off.
    3. Test −3 with synthetic division. Top row 1, 1, −7,−3. Bring down 1. 1×(−3)=−3, and 1+(−3)=−2. −2×(−3)=6, and −7+6=−1. −1×(−3)=3, and −3+3=0. Bottom row: 1, −2,−1, 0.Dividing by x + 3 is dividing by x − (−3), so −3 goes in the box. The remainder is 0, so −3 is a zero, and the quotient is x2 − 2x − 1.
    4. Set x2 − 2x − 1 = 0, with a = 1, b = −2, c = −1. Discriminant: (−2)2−4(1)(−1)=4+4=8.This finds the inputs that make the quotient 0. It is a quadratic, so the formula finishes the search.
    5. x=2±82=2±222=1±2.8 = 4·2 = 22; then divide each term on top by 2.
    6. Gather: −3,1+2,1−2.One zero from testing and two from the formula.
    Answer
    • x=−3
    • x = 1 + 2 (≈ 2.41, rounded)
    • x = 1 − 2 (≈ −0.41, rounded)
    Double-check Multiply back: (x + 3)(x2 − 2x − 1) = x3 − 2x2 − x + 3x2 − 6x − 3 = x3 + x2 − 7x − 3, the starting polynomial.

    Rung 3 of 13

    Rung 3: the formula gives complex zeros

    Find every zero of f(x) = x3 − 4x2 + 9x − 10, real or complex: every input that makes the output 0.

    What it asks. Find every zero, counting repeats.

    Show the steps and the answer

    The plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.

    x2−2x+5=0:a=1,b=−2,c=5

    b2−4ac=4−20=−16

    −16=4i

    x=2±4i2=1±2i

    1. Plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.
    1. List: the factors of 10 are 1, 2, 5, 10, and the leading coefficient is 1. Candidates: ±1,±2,±5,±10.The Rational Zero Theorem.
    2. Test 1: 1−4+9−10=−4. Test −1: −1−4−9−10=−24.Neither output is 0, so cross off 1 and −1.
    3. Test 2. Top row 1, −4, 9, −10. Bring down 1. 1×2=2, and −4+2=−2. −2×2=−4, and 9+(−4)=5. 5×2=10, and −10+10=0. Bottom row: 1, −2, 5, 0.Remainder 0: 2 is a zero, and the quotient is x2 − 2x + 5.
    4. Set x2 − 2x + 5 = 0, with a = 1, b = −2, c = 5. Discriminant: (−2)2−4(1)(5)=4−20=−16.This finds the inputs that make the quotient 0. A negative discriminant means no real number does it; the last two zeros are complex.
    5. −16=16·−1=4i, so x=2±4i2=1±2i.i stands for −1. Divide each term on top by 2: 2 ÷ 2 = 1 and 4i ÷ 2 = 2i.
    6. Gather: 2, 1+2i,1−2i.One real zero from testing and two complex zeros from the formula.
    Answer
    • x = 2
    • x = 1 + 2i
    • x=1−2i
    Double-check Plug 1 + 2i into the quadratic: (1 + 2i)2 = 1 + 4i + 4i2 = 1 + 4i − 4 = −3 + 4i, and −3 + 4i − 2(1 + 2i) + 5 = −3 + 4i − 2 − 4i + 5 = 0.

    Rung 4 of 13

    Rung 4: no constant term, so pull out x first

    Find every zero of f(x) = x4 − x2 − 6x, real or complex: every input that makes the output 0.

    What it asks. Find every zero, counting repeats.

    Show the steps and the answer

    The plan. Factor out x, find one zero of the cubic by testing, divide it out, and solve the quadratic that is left.

    0x⁴ − x² − 6xinputoutput0
    With no constant term, 0 goes in and 0 comes out: that is the zero you record when you pull out x.
    1. Plan. Factor out x, find one zero of the cubic by testing, divide it out, and solve the quadratic that is left.
    1. The constant term is 0, so factor out x: f(x)=x(x3−x−6).Every term has an x. A constant term of 0 would wreck the candidate list: every nonzero integer divides 0 (0 = 5 × 0, for example), so the list would never end.
    2. Record the zero 0.The factor x is 0 when x = 0, and then the whole product is 0. Plug in to see it: f(0) = 0 − 0 − 0 = 0.
    3. Work on x3−x−6, written x3+0x2−x−6. Candidates: ±1,±2,±3,±6.A 0 holds the missing x2 slot, and the factors of 6 over the factors of 1 give the list.
    4. Test 1: 1−1−6=−6. Test −1: −1+1−6=−6.Neither output is 0, so cross off 1 and −1.
    5. Test 2. Top row 1, 0, −1,−6. Bring down 1. 1×2=2, and 0+2=2. 2×2=4, and −1+4=3. 3×2=6, and −6+6=0. Bottom row: 1, 2, 3, 0.Remainder 0: 2 is a zero, and the quotient is x2 + 2x + 3.
    6. Set x2 + 2x + 3 = 0, with a = 1, b = 2, c = 3. Discriminant: 4−12=−8.This finds the inputs that make the quotient 0. The discriminant is negative, so the last two zeros are complex.
    7. −8=4·2·−1=2i2, so x=−2±2i22=−1±i2.Pull the square 4 out of 8 and write i for −1; then divide each term on top by 2.
    8. Gather: 0, 2, −1+i2,−1−i2.0 from pulling out x, 2 from testing, and two from the formula.
    Answer
    • x = 0
    • x = 2
    • x=−1+i2
    • x=−1−i2
    Double-check Multiply back: (x − 2)(x2 + 2x + 3) = x3 + 2x2 + 3x − 2x2 − 4x − 6 = x3 − x − 6, and x(x3 − x − 6) = x4 − x2 − 6x, the starting polynomial.

    Rung 5 of 13

    Rung 5: the zero is a fraction

    Find every zero of f(x) = 2x3 + x2 − 2x − 6, real or complex: every input that makes the output 0.

    What it asks. Find every zero, counting repeats.

    Show the steps and the answer

    The plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.

    input xoutput f(x)−2−14−1−51−5210↓ evaluate: input given, read the output below it
    No output is 0, but the outputs under 1 and 2 have opposite signs.
    1. Plan. Find one zero by testing, divide it out, and solve the quadratic that is left; keep all three zeros.
    1. List: the factors of 6 are 1, 2, 3, 6, and the factors of the leading coefficient 2 are 1 and 2. Candidates: ±1,±2,±3,±6,±12,±32.Each candidate is ±factorof6factorof2. 22 = 1 and 62 = 3 are already on the list, so they are not written twice.
    2. Test the whole numbers nearest 0: f(1)=2+1−2−6=−5,f(−1)=−2+1+2−6=−5,f(2)=16+4−4−6=10,f(−2)=−16+4+4−6=−14.No output in the table is 0, so 1, −1, 2 and −2 are not zeros.
    3. Look at the outputs under 1 and 2 in the table: −5 and 10.A polynomial's graph is one unbroken curve, so to get from below the x-axis (−5) to above it (10), it must cross the axis between 1 and 2. The only candidate in that gap is 32, so test it next. The crossing could still sit at a number off the list; the test settles it.
    4. Test 32. Top row 2, 1, −2,−6. Bring down 2. 2×32=3, and 1+3=4. 4×32=6, and −2+6=4. 4×32=6, and −6+6=0. Bottom row: 2, 4, 4, 0.Remainder 0: 32 is a zero, and the quotient is 2x2 + 4x + 4. The rest of the list (±3, ±6, ±12, −32) never needs testing, because the formula covers what is left.
    5. Divide the quotient by 2: solve x2+2x+2=0 in place of 2x2+4x+4=0.Dividing both sides of an equation by 2 does not change which x make it true, and smaller numbers mean fewer slips.
    6. a=1,b=2,c=2. Discriminant: 4−8=−4, and −4=2i. So x=−2±2i2=−1±i.This finds the inputs that make the quotient 0; divide each term on top by 2.
    7. Gather: 32,−1+i,−1−i.One zero from testing and two from the formula.
    Answer
    • x=32
    • x=−1+i
    • x=−1−i
    Double-check Plug 32 into f the long way: 2 × 278 + 94 − 3 − 6 = 274 + 94 − 9 = 364 − 9 = 9 − 9 = 0. And multiply back: (x − 32)(2x2 + 4x + 4) = 2x3 + 4x2 + 4x − 3x2 − 6x − 6 = 2x3 + x2 − 2x − 6.

    Rung 6 of 13

    Rung 6: two zeros to find before the formula

    Find every zero of f(x) = x4 − 2x3 + x2 − 8x − 12, real or complex: every input that makes the output 0.

    What it asks. Find every zero, counting repeats.

    Show the steps and the answer

    The plan. Find a zero, divide it out, and repeat; finish the quadratic and keep all roots.

    x4−2x3+x2−8x−12

    divide by x + 1: bottom row 1, −3, 4, −12, 0

    x3−3x2+4x−12

    divide by x − 3: bottom row 1, 0, 4, 0

    x2+4

    formula: x = 2i or x = −2i

    1. Plan. Find a zero, divide it out, and repeat; finish the quadratic and keep all roots.
    1. List: the factors of 12 are 1, 2, 3, 4, 6, 12, and the leading coefficient is 1. Candidates: ±1,±2,±3,±4,±6,±12.The Rational Zero Theorem.
    2. Test 1: 1−2+1−8−12=−20. Test −1: 1+2+1+8−12=0.1 fails. For −1, even powers give 1 and odd powers give −1, so the terms are 1, +2, +1, +8 and −12, which add to 0: −1 is a zero.
    3. Divide by x+1, so −1 goes in the box. Top row 1, −2, 1, −8,−12. Bring down 1. 1×(−1)=−1, and −2+(−1)=−3. −3×(−1)=3, and 1+3=4. 4×(−1)=−4, and −8+(−4)=−12. −12×(−1)=12, and −12+12=0. Bottom row: 1, −3, 4, −12, 0.Remainder 0 confirms −1. The quotient x3 − 3x2 + 4x − 12 is still a cubic, so testing goes on.
    4. Test −1 again on the quotient: −1−3−4−12=−20. Skip 1.A zero can work twice, so it gets one more test; here it fails. 1 failed on f, and every zero of the quotient is a zero of f, so 1 cannot work now.
    5. Test 2: 8−12+8−12=−8. Test −2: −8−12−8−12=−40. Test 3: 27−27+12−12=0.2 and −2 fail; 3 gives 0, so 3 is a zero.
    6. Divide x3−3x2+4x−12 by x−3. Top row 1, −3, 4, −12. Bring down 1. 1×3=3, and −3+3=0. 0×3=0, and 4+0=4. 4×3=12, and −12+12=0. Bottom row: 1, 0, 4, 0.Remainder 0 again. The quotient is x2 + 0x + 4, that is, x2 + 4.
    7. Set x2+4=0, with a=1,b=0,c=4. Discriminant: 0−16=−16, and −16=4i. So x=0±4i2=±2i.This finds the inputs that make the last quotient 0. The formula works when b = 0 too; 4i ÷ 2 = 2i.
    8. Gather: −1, 3, 2i, −2i.Two zeros from testing and two from the formula.
    Answer
    • x=−1
    • x = 3
    • x = 2i
    • x=−2i
    Double-check Multiply back the pieces we found: (x + 1)(x − 3) = x2 − 2x − 3, and (x2 − 2x − 3)(x2 + 4) = x4 + 4x2 − 2x3 − 8x − 3x2 − 12 = x4 − 2x3 + x2 − 8x − 12, the starting polynomial. Also (2i)2 + 4 = −4 + 4 = 0.

    Rung 7 of 13

    Rung 7: fractions, two divisions and square roots

    Find every zero of f(x) = 3x4 − 11x3 + 2x2 + 14x + 4, real or complex: every input that makes the output 0.

    What it asks. Find every zero, counting repeats.

    Show the steps and the answer

    The plan. Find a zero, divide it out, and repeat; finish the quadratic and keep all roots.

    3x4−11x3+2x2+14x+4

    divide by x − 2: bottom row 3, −5, −8, −2, 0

    3x3−5x2−8x−2

    divide by x + 13: bottom row 3, −6, −6, 0

    3x2 − 6x − 6, divided by 3: x2 − 2x − 2

    formula: x = 1 ± 3

    1. Plan. Find a zero, divide it out, and repeat; finish the quadratic and keep all roots.
    1. List: the factors of 4 are 1, 2, 4, and the factors of 3 are 1 and 3. Candidates: ±1,±2,±4,±13,±23,±43.Each candidate is ±factorof4factorof3; dividing by 3 gives the thirds.
    2. Test 1: 3−11+2+14+4=12. Test −1: 3+11+2−14+4=6.Neither is 0, so cross off 1 and −1. For −1 the odd powers flip sign: −11x3 becomes +11 and 14x becomes −14.
    3. Test 2. Top row 3, −11, 2, 14, 4. Bring down 3. 3×2=6, and −11+6=−5. −5×2=−10, and 2+(−10)=−8. −8×2=−16, and 14+(−16)=−2. −2×2=−4, and 4+(−4)=0. Bottom row: 3, −5,−8,−2, 0.Remainder 0: 2 is a zero, and the quotient is 3x3 − 5x2 − 8x − 2.
    4. Make a new list from the quotient: the factors of 2 over the factors of 3 give ±1,±2,±13,±23. Cross off 1 and −1 at once. Test 2 again: 24−20−16−2=−14. Test −2: −24−20+16−2=−30.The list shrank because the constant term is now −2. A number that failed on f fails on the quotient too, since every zero of the quotient is a zero of f. 2 gets a second test because a zero can repeat; it fails here, and so does −2.
    5. Test the thirds. 13 gives the bottom row 3, −4,−283,−469, so its remainder is not 0. Try −13: top row 3, −5,−8,−2. Bring down 3. 3×(−13)=−1, and −5+(−1)=−6. −6×(−13)=2, and −8+2=−6. −6×(−13)=2, and −2+2=0. Bottom row: 3, −6,−6, 0.Remainder 0: −13 is a zero, and the quotient is 3x2 − 6x − 6.
    6. Divide by 3: solve x2−2x−2=0.Every coefficient of 3x2 − 6x − 6 is a multiple of 3, and dividing both sides by 3 keeps the same solutions.
    7. a=1,b=−2,c=−2. Discriminant: 4−4(1)(−2)=4+8=12, and 12=4·3=23. So x=2±232=1±3.This finds the inputs that make the last quotient 0; divide each term on top by 2.
    8. Gather: 2, −13,1+3,1−3.Two zeros from testing and two from the formula.
    Answer
    • x = 2
    • x=−13
    • x = 1 + 3 (≈ 2.73, rounded)
    • x = 1 − 3 (≈ −0.73, rounded)
    Double-check The bottom rows say f(x) = (x − 2)(x + 13)(3x2 − 6x − 6). Move the 3 out of the last piece into the middle one: 3 × (x + 13) = 3x + 1, so f(x) = (x − 2)(3x + 1)(x2 − 2x − 2). Multiply: (x − 2)(3x + 1) = 3x2 − 5x − 2, and (3x2 − 5x − 2)(x2 − 2x − 2) = 3x4 − 6x3 − 6x2 − 5x3 + 10x2 + 10x − 2x2 + 4x + 4 = 3x4 − 11x3 + 2x2 + 14x + 4, the starting polynomial.

    Rung 8 of 13

    Practice: a negative zero repeats

    Find all real zeros of f(x) = x4 + 6x3 + 2x2 − 42x − 63. State each multiplicity.

    What it asks. Find repeated zeros and their multiplicities.

    Show the steps and the answer

    The plan. Test each successful zero again on the quotient, then solve what remains.

    1. Plan. Test each successful zero again on the quotient, then solve what remains.
    2. After a successful division, try the same number on the quotient before crossing it off.
    1. Test c=−3. The first bottom row is 1, 3, −7,−21, 0.This candidate comes from factors of the constant over factors of the leading coefficient. Remainder 0 proves it is a zero.
    2. Test −3 on the quotient. The next bottom row is 1, 0, −7, 0.Use the shorter row without its last remainder. A second remainder of 0 means the same factor occurs again.
    3. After two divisions, f(x)=(x+3)2(x2−7).Keep both copies of the known factor. With a fractional zero, move the numerical scale into those factors.
    4. Solve x2−7=0: x=7 or x=−7.Both opposite numbers square to the same positive value.
    5. The zero −3 counts twice. Each square root counts once.The last quadratic is nonzero at the repeated zero. The total 2 + 1 + 1 matches degree 4.
    Answer
    • x = −3, multiplicity 2
    • x=7
    • x=−7
    Double-check Expanding (x + 3)2(x2 − 7) returns x4 + 6x3 + 2x2 − 42x − 63. The factor for each listed zero vanishes; the two successive divisions also confirm the repeated factor. Equivalent exact forms count: list the zeros in any order, or use ± for a pair. For a repeated zero, give its multiplicity or list it twice. Write sqrt(2) for 2 if typing; i2 and 2i mean the same number.

    Rung 9 of 13

    Practice: a fractional zero repeats

    Find all real zeros of f(x) = 4x4 − 12x3 − 11x2 + 60x − 45. State each multiplicity.

    What it asks. Find repeated zeros and their multiplicities.

    Show the steps and the answer

    The plan. Test each successful zero again on the quotient, then solve what remains.

    1. Plan. Test each successful zero again on the quotient, then solve what remains.
    2. After a successful division, try the same number on the quotient before crossing it off.
    1. Test c=32. The first bottom row is 4, −6,−20, 30, 0.This candidate comes from factors of the constant over factors of the leading coefficient. Remainder 0 proves it is a zero.
    2. Test 32 on the quotient. The next bottom row is 4, 0, −20, 0.Use the shorter row without its last remainder. A second remainder of 0 means the same factor occurs again.
    3. After two divisions, f(x)=(2x−3)2(x2−5).Keep both copies of the known factor. With a fractional zero, move the numerical scale into those factors.
    4. Solve x2−5=0: x=5 or x=−5.Both opposite numbers square to the same positive value.
    5. The zero 32 counts twice. Each square root counts once.The last quadratic is nonzero at the repeated zero. The total 2 + 1 + 1 matches degree 4.
    Answer
    • x = 32, multiplicity 2
    • x=5
    • x=−5
    Double-check Expanding (2x − 3)2(x2 − 5) returns 4x4 − 12x3 − 11x2 + 60x − 45. The factor for each listed zero vanishes; the two successive divisions also confirm the repeated factor. Equivalent exact forms count: list the zeros in any order, or use ± for a pair. For a repeated zero, give its multiplicity or list it twice. Write sqrt(2) for 2 if typing; i2 and 2i mean the same number.

    Rung 10 of 13

    Practice: finish both squared equations

    Find every complex zero, including the real zeros, of f(x) = x4 − 5x2 − 14.

    What it asks. Solve a quartic made of x to the fourth, x squared, and a constant.

    Show the steps and the answer

    The plan. Solve for x squared first, then take both square roots of each value.

    1. Plan. Solve for x squared first, then take both square roots of each value.
    2. Rename x2 as u, solve the quadratic in u, then solve each equation x2 = u.
    1. Set u=x2. Then x4=u2, so solve u2−5u−14=0.The powers 4, 2 and 0 have the same pattern as a quadratic. Renaming x2 makes that pattern visible.
    2. (u−7)(u+2)=0. Thus u−7=0 or u+2=0, giving u=7 or u=−2.The factors multiply to the quadratic. A product equals zero when at least one factor equals zero. These are values of u; solve for x next.
    3. x2=7 gives ±7; x2=−2 gives ±i2.Replace u with x2. Both signs are needed when taking square roots. A negative squared value uses i2 = −1.
    4. The factorization over real coefficients is (x2−7)(x2+2).It shows both squared equations together. Their four zeros account for degree 4.
    Answer
    • x=7
    • x=−7
    • x=i2
    • x=−i2
    Double-check Expand (x2 − 7)(x2 + 2) to recover x4 − 5x2 − 14. Squaring each listed zero gives one of the two solved u values, so substitution makes a factor 0. Equivalent exact forms count: list the zeros in any order, or use ± for a pair. For a repeated zero, give its multiplicity or list it twice. Write sqrt(2) for 2 if typing; i2 and 2i mean the same number.

    Rung 11 of 13

    Practice: four irrational real zeros

    Find every complex zero, including the real zeros, of f(x) = 2x4 − 13x2 + 15.

    What it asks. Solve a quartic made of x to the fourth, x squared, and a constant.

    Show the steps and the answer

    The plan. Solve for x squared first, then take both square roots of each value.

    1. Plan. Solve for x squared first, then take both square roots of each value.
    2. Rename x2 as u, solve the quadratic in u, then solve each equation x2 = u.
    1. Set u=x2. Then x4=u2, so solve 2u2−13u+15=0.The powers 4, 2 and 0 have the same pattern as a quadratic. Renaming x2 makes that pattern visible.
    2. (u−5)(2u−3)=0. Thus u−5=0 or 2u−3=0, giving u=5 or u=3/2.The factors multiply to the quadratic. A product equals zero when at least one factor equals zero. These are values of u; solve for x next.
    3. x2=5 gives ±5; x2=3/2 gives ±3/2=±62.Replace u with x2. Both signs are needed when taking square roots. A negative squared value uses i2 = −1.
    4. The factorization over real coefficients is (x2−5)(2x2−3).It shows both squared equations together. Their four zeros account for degree 4.
    Answer
    • x=5
    • x=−5
    • x=62
    • x=−62
    Double-check Expand (x2 − 5)(2x2 − 3) to recover 2x4 − 13x2 + 15. Squaring each listed zero gives one of the two solved u values, so substitution makes a factor 0. Equivalent exact forms count: list the zeros in any order, or use ± for a pair. For a repeated zero, give its multiplicity or list it twice. Write sqrt(2) for 2 if typing; i2 and 2i mean the same number.

    Rung 12 of 13

    Practice: solve for a width

    A rectangular box has a volume of 189 cubic units. Its length is 4 units more than its width. Its height is three times its width. Find the width, the length and the height.

    What it asks. Find the dimensions from a volume.

    Show the steps and the answer

    The plan. Write a product of three lengths, solve the volume equation, and keep physical dimensions.

    1. Plan. Write a product of three lengths, solve the volume equation, and keep physical dimensions.
    2. Call the width w. Write the length and the height from the words, multiply the three, and set the product equal to the volume.
    1. Let w be the width. Then the length is w+4 and the height is 3w, with w > 0.Both other lengths are described from one length, so one letter covers all three. A length must be positive.
    2. The three lengths multiply to the volume, so w(w+4)(3w)=189.The volume of a box is width × length × height. The order of the three does not change the product.
    3. w·3w=3w2, and 3w2(w+4)=3w3+12w2. So 3w3+12w2=189, which gives 3w3+12w2−189=0.Multiply out the left side, then subtract the volume from both sides so one side is 0. Now the unknown length is a zero of a polynomial.
    4. Divide every term by 3: w3+4w2−63=0. Test whole numbers that divide 63. w=1 gives 1+4−63=−58. w=3 gives 27+36−63=0.Dividing an equation by 3 keeps its solutions and makes the numbers smaller. By the Rational Zero Theorem, a whole-number zero must divide the constant 63.
    5. Synthetic division at 3 on 1, 4, 0, −63 gives the bottom row 1, 7, 21, 0. The other factor is w2+7w+21.Remainder 0 confirms the zero. The quotient holds any other solutions.
    6. For w2+7w+21 the discriminant is 72−4(1)(21)=49−84=−35. So w=3 is the only real solution.A negative discriminant means the quadratic has no real zeros. A length must be a real positive number.
    7. Width 3. Length 3+4=7. Height 3·3=9.The question asks for all three lengths, not only the letter.
    Answer
    • Width: 3
    • Length: 7
    • Height: 9
    Double-check 3 × 7 × 9 = 189, the given volume. The length 7 is 4 more than the width 3, and the height 9 is three times 3.

    Rung 13 of 13

    Practice: solve for a height

    A rectangular box has a volume of 216 cubic units. Its width is 2 units more than its height. Its length is 5 units more than its height. Find the width, the length and the height.

    What it asks. Find the dimensions from a volume.

    Show the steps and the answer

    The plan. Write a product of three lengths, solve the volume equation, and keep physical dimensions.

    1. Plan. Write a product of three lengths, solve the volume equation, and keep physical dimensions.
    2. Call the height h. Write the width and the length from the words, multiply the three, and set the product equal to the volume.
    1. Let h be the height. Then the width is h+2 and the length is h+5, with h > 0.Both other lengths are described from one length, so one letter covers all three. A length must be positive.
    2. The three lengths multiply to the volume, so h(h+2)(h+5)=216.The volume of a box is width × length × height. The order of the three does not change the product.
    3. (h+2)(h+5)=h2+7h+10, and h(h2+7h+10)=h3+7h2+10h. So h3+7h2+10h=216, which gives h3+7h2+10h−216=0.Multiply out the left side, then subtract the volume from both sides so one side is 0. Now the unknown length is a zero of a polynomial.
    4. Test whole numbers that divide 216. h=1 gives 1+7+10−216=−198. h=2 gives 8+28+20−216=−160. h=3 gives 27+63+30−216=−96. h=4 gives 64+112+40−216=0.By the Rational Zero Theorem, a whole-number zero must divide the constant 216. Test the small ones first.
    5. Synthetic division at 4 on 1, 7, 10, −216 gives the bottom row 1, 11, 54, 0. The other factor is h2+11h+54.Remainder 0 confirms the zero. The quotient holds any other solutions.
    6. For h2+11h+54 the discriminant is 112−4(1)(54)=121−216=−95. So h=4 is the only real solution.A negative discriminant means the quadratic has no real zeros. A length must be a real positive number.
    7. Height 4. Width 4+2=6. Length 4+5=9.The question asks for all three lengths, not only the letter.
    Answer
    • Width: 6
    • Length: 9
    • Height: 4
    Double-check 6 × 9 × 4 = 216, the given volume. The width 6 is 2 more than the height 4, and the length 9 is 5 more than 4.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: Writing the top row of x3 − 8x + 8 as 1, −8, 8 and dividing by x − 2. The bottom row comes out 1, −6, −4, so 2 looks like it fails.
    With no 0 in the empty x2 slot, every number slides one column over, and the table divides x2 − 8x + 8 instead. Its value at 2 is 4 − 16 + 8 = −4, not 0.
    ✓ Instead: Top row 1, 0, −8, 8. The bottom row is 1, 2, −4, 0: remainder 0, so 2 is a zero.
    ✗ Not this: Answering x = 2 for x3 − 8x + 8 because 2 passed the test.
    One success only splits the polynomial: x3 − 8x + 8 = (x − 2)(x2 + 2x − 4), and the quotient x2 + 2x − 4 has zeros of its own.
    ✓ Instead: Keep going until a quadratic is solved. The zeros are 2, −1 + 5 and −1 − 5.
    ✗ Not this: Crossing 1 off for good after it works on x4 − 2x3 + 2x2 − 2x + 1. The quotient is x3 − x2 + x − 1, the only other candidate, −1, gives −1 − 1 − 1 − 1 = −4, and you decide you are stuck.
    A zero of f can be a zero of the quotient too. Here 1 − 1 + 1 − 1 = 0, so 1 works a second time.
    ✓ Instead: Test each zero again on the new quotient. Dividing x3 − x2 + x − 1 by x − 1 leaves x2 + 1, and the formula gives i and −i. The zeros are 1 (found twice), i and −i.
    ✗ Not this: Feeding the cubic's numbers to the quadratic formula: for x3 − 8x + 8, taking a = 1, b = −8, c = 8 and getting x = 4 ± 22.
    The formula is built only for ax2 + bx + c. Those two numbers solve x2 − 8x + 8 = 0, a different polynomial, and f(4 + 22) is not 0.
    ✓ Instead: Divide out a zero first, then use the formula on the quotient x2 + 2x − 4, which gives −1 ± 5.
    ✗ Not this: For 2x3 + x2 − 2x − 6, testing only ±1, ±2, ±3, ±6, seeing all of them fail, and deciding there is no rational zero.
    The leading coefficient is 2, so the list also holds the halves ±12 and ±32. Skipping them skips the actual zero.
    ✓ Instead: Test the fractions too: 32 gives remainder 0.

    Tips and tricks

    • Memory cue: test, divide, shrink, repeat; at x2, use the formula.
    • For f(1), add coefficients: 1 − 3 − 13 + 15 = 0 confirms the zero 1 of x3 − 3x2 − 13x + 15.
    • Substitution is quick for 1 and −1. Synthetic division also gives the quotient.
    • Reject a failed candidate permanently: every quotient zero would also be an original zero. Test a successful candidate again for repeats.
    • For 2x3 + x2 − 2x − 6, f(1) = −5 and f(2) = 10. Opposite signs and a graph with no breaks guarantee a zero between 1 and 2.
    • Before the formula, divide out common coefficients: 2x2 + 4x + 4 = 0 becomes x2 + 2x + 2 = 0.
    • Name your c: x − c uses the tested zero; ax2 + bx + c uses the constant term.
    • Write i before the radical, as in −1 + i2.
    • Expand the factors to check every original coefficient.

    7 The trap

    Wrong: keep testing the original polynomial. Right: test the quotient and keep every zero already found.

    Keep in mind

    • Test tasks: find every zero of a cubic or quartic, detect repeated factors, solve an equation in x2, and turn a volume model into a zero search.

    Flash cards

    Say the answer out loud, then flip.

    A test on the number c gives a remainder of 0. What does that tell you, and what do you do next?
    • It tells you c is a zero, the same as f(c) = 0. The key turned.
    • Record c, then switch to the quotient in the bottom row. That smaller polynomial is the one you work on from then on.
    When do you stop testing candidates and bring out the quadratic formula?
    When the quotient is a quadratic, meaning its top power is x2. The box is now small enough for the master key. The quadratic formula gives its last two zeros, real or not.
    How do you build the list of candidates to test?
    Write every ±factoroftheconstanttermfactoroftheleadingcoefficient, without repeats. This is the ring of keys. No rational zero sits off this list.
    You found one zero by testing, and the quadratic formula gave two more. What goes in the final answer?
    All three: the zero found by testing plus the formula's two. The tempting mistake is to write only the formula's two and leave the first zero behind.

    From earlier

    Synthetic division by x - c

    You divide by x + 5 using synthetic division. What number goes in the box?
    Show answer
    −5. The divisor must be read as x − c, and x + 5 is x − (−5), so c = −5. The number in the box always has the opposite sign from the one you see in the divisor.

    The Remainder Theorem

    You divide a polynomial f(x) by x − c. What does the Remainder Theorem say the remainder is?
    Show answer
    The remainder is f(c), the output you get when you put c in for x.