Quarry School

The Fundamental Theorem of Algebra and complex conjugate pairs

Subject: MathematicsLeans on: What i isLeans on: Complex numbersLeans on: The degreeLeans on: Exponents count repeatsLeans on: The Factor TheoremLeans on: Synthetic divisionLeans on: The Rational Zero TheoremLeans on: The quadratic formulaLeans on: Multiplying with iLeans on: Multiplying signed fractions
Level 2 · BuildingAbout 32 min read6 new termsKeystone idea. Later lessons build on this one.
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Leans on

    Quick review (2 minutes)

    In plain words

    The big picture: Use the degree to count all zeros, including repeats.

    Rule

    Fundamental Theorem of Algebra: every polynomial of degree n ≥ 1 has at least one zero among the complex numbers, so it has exactly n zeros counted with multiplicity; written as a product, f(x) = an(x − c1)(x − c2) ··· (x − cn), where an is the leading coefficient (the Linear Factorization Theorem).
    Complex conjugate pairs: if every coefficient of f is real and a + bi with b ≠ 0 is a zero, then its conjugate a − bi is also a zero.

    Question

    How many zeros does f(x) = x4 − 1 have? Find them all.

    Answer

    4 zeros
    1, −1, i and −i

    Strategy

    1. Read the degree of the nonzero polynomial.

    2. List known zeros and their multiplicities.

    3. Include nonreal zeros when solving the remaining factors.

    4. Add the multiplicities. Their total must equal the degree.

    Strategy

    1. Keep the leading coefficient in front.

    2. Find every zero, including nonreal zeros and repeats.

    3. Write one factor x minus c for each zero c, repeating factors as required.

    4. Expand the product and compare every coefficient.

    Strategy

    1. Set each distinct linear factor equal to zero.

    2. Read the exponent on that factor as the multiplicity; an unwritten exponent is one.

    3. List each zero with its multiplicity.

    4. Add the multiplicities and compare with the degree.

    Strategy

    1. Check that all polynomial coefficients are real.

    2. Keep the real part of the given zero.

    3. Reverse only the sign of the imaginary part.

    4. Count the pair toward the degree and substitute to check if a formula is given.

    Step

    1. For f(x) = 2x3 − 3x2 + 8x + 5 with given zero 1 + 2i, read degree 3. The Fundamental Theorem of Algebra gives 3 zeros counted with repeats, so it sets the target count.

    2. All coefficients are real. Apply the complex conjugate pairs rule to add 1 − 2i. These two zeros leave one place; that zero must be real because a nonreal zero would need another partner.

    3. Use the Rational Zero Theorem to list ±1, ±5, ±12, ±52. The numerators divide 5 and the denominators divide 2. Test small candidates: f(1) = 12, f(−1) = −8, and f(12) = 172; none gives zero.

    4. Test −12 by synthetic division with 2, −3, 8, 5. Bring down 2, then multiply and add: −3 − 1 = −4, 8 + 2 = 10, and 5 − 5 = 0. The Remainder Theorem identifies the final 0 as f(−12). The other bottom entries give the quotient 2x2 − 4x + 10, and the Factor Theorem gives f(x) = (x + 12)(2x2 − 4x + 10).

    5. Collect −12, 1 + 2i and 1 − 2i. The Fundamental Theorem’s count is met and the nonreal pair is complete, so the search is finished.

    6. Check the quotient with the quadratic formula: x = 4±−644 = 4±8i4 = 1 ± 2i. Also substitute −12 into f to get −14 − 34 − 4 + 5 = 0. These checks recover the pair and verify the real zero.

    Strategy

    1. Read the degree n. List the known zeros, each as many times as its multiplicity.

    2. With real coefficients, add the conjugate of each nonreal zero: keep the real part and reverse the sign of the imaginary part.

    3. Subtract your count from n. If one zero is missing, it is real.

    4. Find the missing zeros: test rational candidates with synthetic division, then solve a leftover quadratic with the formula.

    5. Check: n zeros in all, and each nonreal zero beside its conjugate.

    Trap

    Wrong: count only distinct intercepts. Right: count real and nonreal zeros with multiplicity to the degree.

    Term

    Remainder Theorem

    Definition

    When you divide a polynomial f(x) by x − c, the remainder equals f(c), the value you get by plugging c into f.

    Term

    Factor Theorem

    Definition

    x − c is a factor of f(x) exactly when f(c) = 0. Finding a zero and finding a factor are the same discovery.

    Term

    Rational Zero Theorem

    Definition

    With integer coefficients, every zero that is a fraction has the form ±pq, where p is a factor of the constant term and q is a factor of the leading coefficient.

    Term

    Fundamental Theorem of Algebra

    Definition

    Every polynomial of degree 1 or more has at least one zero in the complex numbers. As a result, a polynomial of degree n has exactly n zeros, counted with multiplicity.

    Term

    Linear Factorization Theorem

    Definition

    Every polynomial of degree n breaks into exactly n factors of the form (x − c), times its leading coefficient. The numbers c are its zeros and may be complex.

    Term

    complex conjugate pair

    Definition

    Two complex numbers a + bi and a − bi: the same real part, opposite signs on the i part. Nonreal zeros of a polynomial with real coefficients always arrive together as such a pair.

    1 In plain words

    The big picture: Use the degree to count all zeros, including repeats. With real coefficients, each nonreal zero has a partner with the opposite imaginary sign. This completes the search from the previous lesson and prepares you to build a polynomial from its zeros.

    The degree counts seats for zeros. Real zeros appear on the graph at the x-axis. Nonreal zeros use i, where i2 = −1. A repeated zero fills several seats. For real coefficients, nonreal zeros come in conjugate pairs: the real part stays the same and the imaginary sign reverses.

    2 Picture it

    (2, 1)24−2246810(2, 1)−112345−2246810
    y = x2 − 4x + 5, which is (x − 2)2 + 1, never reaches the x-axis.

    Reminder

    Reminder: What i is, Complex numbers, The degree, Exponents count repeats, The Factor Theorem, Synthetic division, The Rational Zero Theorem, The quadratic formula, Multiplying with i, Multiplying signed fractions
    • What i is. i is the number with i2 = −1, so −25 = 25 · −1 = 5i, and (−5i)2 = 25i2 = −25 as well.
    • Complex numbers. A complex number is a + bi with a and b real: in 3 − 2i the real part is 3 and the i part is −2. When b = 0 it is an ordinary real number (5 = 5 + 0i); when b ≠ 0 it is nonreal.
    • The degree. The degree is the biggest exponent on x once the polynomial is multiplied out: 2x3 − 3x2 + 8x + 5 has degree 3.
    • Exponents count repeats. (x − 4)3 means (x − 4)(x − 4)(x − 4), three copies of one factor, the way 23 = 2 · 2 · 2.
    • The Factor Theorem. f(c) = 0 exactly when x − c is a factor: x2 − 9 has the zero 3, and x2 − 9 = (x − 3)(x + 3).
    • Synthetic division. Bring down the first coefficient, multiply it by c, add the result to the next coefficient, and repeat; the last number is the remainder, which equals f(c). For x2 − 5x + 6 and c = 2: bring down 1, then 1 × 2 = 2 and −5 + 2 = −3, then −3 × 2 = −6 and 6 + (−6) = 0, so the quotient is x − 3 and the remainder is 0.
    • The Rational Zero Theorem. Any rational zero is ± a factor of the constant term over a factor of the leading coefficient: for 2x2 + x − 3 the candidates are ±1, ±3, ±12 and ±32.
    • The quadratic formula. ax2 + bx + c = 0 has x = −b±b2−4ac2a. For x2 − 4x + 5 = 0: x = 4±16−202 = 4±2i2 = 2 ± i.
    • Multiplying with i. Multiply as with any two binomials, then replace i2 by −1: (2 + i)2 = 4 + 4i + i2 = 4 + 4i − 1 = 3 + 4i.
    • Multiplying signed fractions. A negative times a negative is positive: −4 × (−12) = 2, while 10 × (−12) = −5.

    3 Why

    Every nonconstant polynomial has a complex zero; its proof needs more advanced mathematics. Dividing out a zero lowers the degree by one. Repeating gives n linear factors for degree n. With real coefficients, conjugating every calculation leaves the coefficients unchanged, so the conjugate of a zero also gives zero.

    4 The rule

    Fundamental Theorem of Algebra: every polynomial of degree n ≥ 1 has at least one zero among the complex numbers, so it has exactly n zeros counted with multiplicity; written as a product, f(x) = an(x − c1)(x − c2) ··· (x − cn), where an is the leading coefficient (the Linear Factorization Theorem).source 1

    Complex conjugate pairs: if every coefficient of f is real and a + bi with b ≠ 0 is a zero, then its conjugate a − bi is also a zero.source 1

    Sources (1)
    1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

    The same idea, five ways

    Say it

    Degree n means n zeros, counting repeats. With real coefficients, the nonreal zeros come as twins: a plus b i and a minus b i.

    Write it

    A polynomial of degree n, with n at least 1, has exactly n zeros among the complex numbers when each zero is counted as many times as its factor repeats; if every coefficient is real and a + bi with b ≠ 0 is a zero, then its conjugate a − bi is a zero too.

    In math
    • degree n ≥ 1 → exactly n zeros c1, c2, …, cn, repeats allowed
    • f(x) = an(x − c1)(x − c2) ··· (x − cn), with an the leading coefficient
    • real coefficients and f(a + bi) = 0 → f(a − bi) = 0
    • real zeros + nonreal zeros = n, counting repeats, and the nonreal count is even
    Like

    A bus with n seats that never leaves until every seat is filled: the riders by the window are the real zeros you see on the graph, the riders out of view are the nonreal zeros, one rider may hold two seats (a repeated zero), and the riders out of view always board as twins.

    See it
    (−1, 0)−22−8−448
    y = x3 + 1 crosses the x-axis only at −1, so the other two of its 3 zeros are off the picture.

    The same idea, other ways

    As a picture

    Put two degree 2 graphs side by side. y = x2 − 4 crosses the x-axis at −2 and 2: two zeros you can see. y = x2 + 4 floats above the axis and never touches it, yet it has two zeros as well, 2i and −2i, because x2 + 4 = 0 means x2 = −4, and (2i)2 + 4 = −4 + 4 = 0. A graph is drawn over real x values only, so it can show the real zeros and nothing else. The degree, not the picture, tells you how many zeros there are.

    −22−22−448
    Solid y = x2 − 4 meets the x-axis at −2 and 2, while dashed y = x2 + 4 never does, yet both have 2 zeros.
    As a story

    Gloves are sold in pairs: a left and a right, mirror images of each other. Nonreal zeros of a polynomial with real coefficients arrive the same way. 3 + 2i is a left glove, its mirror image 3 − 2i is the right one, and you never find one in the box without the other. A real zero is more like a ball: its mirror image is itself, so it needs no partner. And the box always holds exactly as many items as the degree, with a repeated zero counted once for each copy of its factor.

    With small numbers

    Take f(x) = x3 − 2x2 + x − 2. Its degree is 3, so expect 3 zeros. Try 2: f(2) = 8 − 8 + 2 − 2 = 0, so 2 is a zero. Synthetic division by 2 on 1, −2, 1, −2 gives the quotient numbers 1, 0, 1 and the remainder 0, so the quotient is x2 + 1. Setting x2 + 1 = 0 gives x2 = −1, so x = i or x = −i. The zeros are 2, i and −i: three, as promised, and the two nonreal ones are the complex conjugate pair 0 + i and 0 − i.

    Why it must be true

    Two facts do all the work. The count: the Factor Theorem turns each zero c into a factor x − c, and dividing it out leaves a quotient of degree one less. The Fundamental Theorem of Algebra promises that quotient a zero while its degree is 1 or more, so you peel off one factor at a time, n times, until only the leading coefficient is left. What remains is f(x) = an(x − c1) ··· (x − cn), the Linear Factorization Theorem: n factors, n zeros. The pairs: i and −i both square to −1, so arithmetic with real numbers cannot tell them apart. Plug 2 + i and 2 − i into x2 − 4x + 5 side by side: every line matches except the sign of each i term, and both lines end at 0.

    f(x)=x2−4x+5

    (2+i)2=3+4i,(2−i)2=3−4i

    f(2+i)=(3+4i)−(8+4i)+5=0

    f(2−i)=(3−4i)−(8−4i)+5=0

    same steps, each i term's sign flipped

    As a rule of thumb

    Count to the degree. With real coefficients, the real zeros you can see on the graph, each counted as often as it repeats, plus the nonreal zeros in twin pairs, always add up to the degree. So degree 3 means 3 real zeros, or 1 real zero and one pair; degree 4 means 4 real zeros, 2 real zeros and one pair, or two pairs. An odd degree always leaves at least one real zero.

    Degree nZeros in all, counting repeatsReal + nonreal, when the coefficients are real
    111 + 0
    222 + 0 or 0 + 2
    333 + 0 or 1 + 2
    444 + 0, 2 + 2 or 0 + 4
    555 + 0, 3 + 2 or 1 + 4

    Part 1: The Fundamental Theorem of Algebra: degree n, n zeros

    Degree n gives n complex zeros counted with multiplicity. Think of a puzzle box that tells you the piece count before you start. Finding one zero lets you divide out a factor and continue on the smaller polynomial.

    • Statement: every polynomial of degree n ≥ 1 has at least one zero among the complex numbers.
    • Count: it has exactly n zeros, each counted as many times as its factor repeats.
    • Real zeros count too: a real number such as 5 is the complex number 5 + 0i.
    • A graph shows only the real zeros; the theorem counts all of them.
    • A nonzero constant such as f(x) = 7 has degree 0 and no zeros, which fits n = 0.

    degree 1 → 1 zero

    degree 2 → 2 zeros

    degree 3 → 3 zeros

    degree n → n zeros, counting repeats

    real or nonreal, every zero counts

    Reminder

    Reminder: Difference of squares
    • Difference of squares. A2 − B2 = (A − B)(A + B): x2 − 9 = (x − 3)(x + 3), because multiplying out gives x2 + 3x − 3x − 9 and the middle terms cancel.

    What it asks: Count zeros and account for every repeat.

    1. Read the degree of the nonzero polynomial.
    2. List known zeros and their multiplicities.
    3. Include nonreal zeros when solving the remaining factors.
    4. Add the multiplicities. Their total must equal the degree.

    Worked example

    Count and find the zeros of x4 − 1

    How many zeros does f(x) = x4 − 1 have? Find them all.

    What it asks. Count zeros and account for every repeat.

    Show the steps and the answer

    The plan. Read the degree, solve each factor, and count each zero with its multiplicity.

    1. Plan. Read the degree, solve each factor, and count each zero with its multiplicity.
    1. Say what it asks: how many inputs give the output 0, and which ones they are.A zero is an input x with f(x) = 0.
    2. Read the degree: 4. Expect exactly 4 zeros.The Fundamental Theorem of Algebra: degree n means n zeros, counting repeats.
    3. Factor as a difference of squares: x4−1=(x2)2−12=(x2−1)(x2+1).A2 − B2 = (A − B)(A + B), here with A = x2 and B = 1.
    4. Set the first factor equal to 0: x2−1=0 gives x2=1, so x=1 or x=−1.A product is 0 only when one of its factors is 0, so this finds the inputs that make the first factor 0.
    5. Set the second factor equal to 0: x2+1=0 gives x2=−1, so x=i or x=−i.i2 = −1, and (−i)2 = −1 as well.
    6. Plug the nonreal ones back in: i4−1=(i2)2−1=(−1)2−1=0, and (−i)4−1=((−i)2)2−1=(−1)2−1=0.This shows they really give the output 0.
    Answer
    • 4 zeros
    • 1, −1, i and −i
    Double-check Plug in the real ones: 14 − 1 = 0 and (−1)4 − 1 = 1 − 1 = 0. That makes four different inputs with output 0, the 4 the degree promised. A graph of y = x4 − 1 meets the x-axis only at −1 and 1, because i and −i are not real.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The theorem promises that a degree 3 polynomial has 3 different real zeros.
    It promises 3 zeros among the complex numbers, counting repeats. They need not be different, and they need not be real.
    ✓ Instead: x3 has the zero 0 three times, and x3 + x = x(x2 + 1) has the zeros 0, i and −i. Both have degree 3 and 3 zeros.

    Tips and tricks

    • The theorem tells you how many zeros to look for, not where they are: you still find them with candidates, synthetic division and the quadratic formula.
    • If your count comes out below the degree, look for a repeated zero or a missing nonreal pair before anything else.

    Part 2: The Linear Factorization Theorem: the polynomial in pieces

    A linear factor has degree one. The Linear Factorization Theorem writes a degree-n polynomial as its leading coefficient times n such factors. Repeated zeros produce repeated factors.

    • Formula: f(x) = an(x − c1)(x − c2) ··· (x − cn).
    • an is the leading coefficient, the number in front of the biggest power of x.
    • c1, c2, …, cn are the zeros; some may be equal and some may be nonreal.
    • Each factor x − c holds the zero c, by the Factor Theorem; the factor x + 3i is x − (−3i), so its zero is −3i.

    2x3−2x2+18x−18

    =2(x−1)(x−3i)(x+3i)

    2: the leading coefficient

    x − 1 holds the zero 1

    x − 3i holds the zero 3i

    x + 3i holds the zero −3i

    What it asks: Write the polynomial as a product of linear factors.

    1. Keep the leading coefficient in front.
    2. Find every zero, including nonreal zeros and repeats.
    3. Write one factor x minus c for each zero c, repeating factors as required.
    4. Expand the product and compare every coefficient.

    Worked example

    A cubic as a product of linear factors

    Write f(x) = 2x3 − 2x2 + 18x − 18 as its leading coefficient times linear factors, and list its zeros.

    What it asks. Write the polynomial as a product of linear factors.

    Show the steps and the answer

    The plan. Find all zeros and write one linear factor per zero, keeping the leading coefficient.

    1. Plan. Find all zeros and write one linear factor per zero, keeping the leading coefficient.
    1. Say what it asks: break f into 2 times three factors of the form x−c, one for each zero.The Linear Factorization Theorem: degree 3 and leading coefficient 2 give f(x) = 2(x − c1)(x − c2)(x − c3).
    2. List the rational candidates: the factors of 18 are 1, 2, 3, 6, 9 and 18, and the factors of 2 are 1 and 2, so the candidates are ±1,±2,±3,±6,±9,±18,±12,±32 and ±92.The Rational Zero Theorem: ± a factor of the constant term −18 over a factor of the leading coefficient 2.
    3. Test 1: f(1)=2−2+18−18=0.The output is 0, so 1 is a zero, and x − 1 is a factor by the Factor Theorem.
    4. Divide by x−1 with synthetic division on 2, −2, 18, −18. Bring down 2. Then 2×1=2 and −2+2=0. Then 0×1=0 and 18+0=18. Then 18×1=18 and −18+18=0.The remainder 0 confirms it, and the quotient is 2x2 + 0x + 18, which is 2x2 + 18.
    5. Solve 2x2+18=0: 2x2=−18,x2=−9, so x=3i or x=−3i. Plug back in: 2(3i)2+18=2(−9)+18=0, and the same for −3i.This finds the inputs that make the quotient 0, which are zeros of f too; −9 = 3i.
    6. Turn each zero c into the factor x−c: x−1,x−3i and x−(−3i)=x+3i. Put the leading coefficient 2 in front.The Linear Factorization Theorem: f(x) = an(x − c1)(x − c2)(x − c3) with an = 2.
    Answer
    • f(x)=2(x−1)(x−3i)(x+3i)
    • zeros: 1, 3i and −3i
    Double-check Multiply back: (x − 3i)(x + 3i) = x2 − 9i2 = x2 + 9, then (x − 1)(x2 + 9) = x3 − x2 + 9x − 9, and 2 times that is 2x3 − 2x2 + 18x − 18, the original.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: 2x3−2x2+18x−18=(x−1)(x−3i)(x+3i)
    Multiplied out, the right side is x3 − x2 + 9x − 9, half of the left side: the leading coefficient 2 was dropped.
    ✓ Instead: 2x3 − 2x2 + 18x − 18 = 2(x − 1)(x − 3i)(x + 3i). The zeros are the same either way, but only the version with the 2 in front is equal to f.

    Tips and tricks

    • To check a factorization, multiply it back out, conjugate factors first: (x − 3i)(x + 3i) = x2 + 9 has no i left.
    • Write each zero c as the factor x − c, even when c is negative or nonreal: the zero −3i becomes x − (−3i) = x + 3i.

    Part 3: Multiplicity: a zero that counts more than once

    Multiplicity counts copies of a zero’s factor. Think of one name reserving several seats. Set the factor equal to zero to find the zero; read its exponent to count the seats.

    • Multiplicity of a zero c: the number of times the factor x − c appears.
    • (x − 4)3 means 4 has multiplicity 3; x2 means 0 has multiplicity 2, since x = x − 0.
    • Adding the multiplicities of all the zeros gives the degree.
    • On a graph, y = (x − 3)2 meets the x-axis only at 3, yet 3 counts twice.
    (3, 0)246−22468
    y = (x − 3)2 meets the x-axis at the single point 3, but the factor x − 3 appears twice.

    What it asks: Read zeros and multiplicities from factors.

    1. Set each distinct linear factor equal to zero.
    2. Read the exponent on that factor as the multiplicity; an unwritten exponent is one.
    3. List each zero with its multiplicity.
    4. Add the multiplicities and compare with the degree.

    Worked example

    Zeros and multiplicities of a factored polynomial

    List the zeros of f(x) = x2(x + 5)3(x − 1) with their multiplicities, and check the total against the degree.

    What it asks. Read zeros and multiplicities from factors.

    Show the steps and the answer

    The plan. Set each factor to zero and read its exponent; add the counts.

    1. Plan. Set each factor to zero and read its exponent; add the counts.
    1. Say what it asks: each input that makes f(x)=0, and how many times it counts.Multiplicity is how the Fundamental Theorem of Algebra counts repeats.
    2. x2 is x·x, and x=x−0, so 0 is a zero of multiplicity 2.The factor x − 0 appears twice.
    3. (x+5)3 holds three copies of x+5, which is x−(−5), so −5 is a zero of multiplicity 3.x + 5 = 0 when x = −5, and the exponent 3 counts the copies.
    4. (x−1) appears once, so 1 is a zero of multiplicity 1.No exponent means an exponent of 1.
    5. Add: 2+3+1=6. The degree is also 6, since x2·x3·x=x6.Multiplying the leading x terms of the factors gives the biggest power, and exponents add when powers of x multiply.
    Answer
    • 0, multiplicity 2
    • −5, multiplicity 3
    • 1, multiplicity 1
    • 6 zeros in all, matching degree 6
    Double-check Plug in each zero: f(0) = 0 · 125 · (−1) = 0, f(−5) = 25 · 0 · (−6) = 0 and f(1) = 1 · 216 · 0 = 0. Writing the factors one at a time, x · x · (x + 5)(x + 5)(x + 5) · (x − 1), gives six factors, each with one x.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: In (x + 2)3 the zero is 2, counted three times.
    The zero is the input that makes the factor 0, and x + 2 = 0 when x = −2, not 2.
    ✓ Instead: (x + 2)3 has the zero −2 with multiplicity 3: (−2 + 2)3 = 03 = 0, while (2 + 2)3 = 64.

    Tips and tricks

    • Read the multiplicity off the exponent on the factor, then add the exponents of all the factors and compare with the degree.

    Part 4: Complex conjugate pairs: nonreal zeros come as twins

    Conjugates are mirror partners: keep the real part and reverse the sign of the imaginary part, so 4 − 5i pairs with 4 + 5i. When a polynomial has real coefficients, each nonreal zero brings its conjugate. Real zeros are their own conjugates.

    • Conjugate of a + bi: a − bi. Same real part, opposite i part.
    • Rule: if every coefficient of f is real and a + bi with b ≠ 0 is a zero, then a − bi is a zero.
    • Repeats match: if 2 + i counts twice, so does 2 − i.
    • So, counted with repeats, a polynomial with real coefficients has an even number of nonreal zeros, and an odd degree leaves at least one real zero.
    • The rule needs real coefficients: x − 3i has the zero 3i and no partner.
    2 − ix² − 4x + 5inputoutput0
    Its twin 2 + i gives 0, and so does 2 − i, because the coefficients 1, −4 and 5 are all real.

    What it asks: Find the conjugate partner of a nonreal zero.

    1. Check that all polynomial coefficients are real.
    2. Keep the real part of the given zero.
    3. Reverse only the sign of the imaginary part.
    4. Count the pair toward the degree and substitute to check if a formula is given.

    Worked example

    The partner of a zero of a quadratic

    The number 3 + 2i is a zero of f(x) = x2 − 6x + 13. Find the other zero.

    What it asks. Find the conjugate partner of a nonreal zero.

    Show the steps and the answer

    The plan. Keep the real part and reverse only the imaginary sign.

    1. Plan. Keep the real part and reverse only the imaginary sign.
    1. Say what it asks: the output is 0 at 3+2i; find the other input that gives 0.A zero is an input x with f(x) = 0.
    2. Read the coefficients 1, −6 and 13: all real.The pairing rule works only when every coefficient is real.
    3. Write the conjugate: 3−2i.Keep the real part 3 and flip the sign of the i part; nonreal zeros come in complex conjugate pairs.
    4. Stop: degree 2 means exactly 2 zeros, and both are found.The Fundamental Theorem of Algebra: degree 2 allows no third zero.
    Answer
    3−2i
    Double-check Use the quadratic formula with a = 1, b = −6 and c = 13: b2 − 4ac = 36 − 52 = −16 and −16 = 4i, so x = 6±4i2 = 3 ± 2i. Both zeros appear, 3 + 2i and 3 − 2i.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The conjugate of −1 − 4i is 1 + 4i.
    That flips both signs, which gives the negative of the number, not its conjugate.
    ✓ Instead: Keep the real part −1 and flip only the i part: the conjugate of −1 − 4i is −1 + 4i.

    Tips and tricks

    • Flip only the sign directly in front of the i; the real part never changes.
    • The ± in the quadratic formula hands you the pair at once: 3 ± 2i means 3 + 2i and 3 − 2i.

    5 How

    1. For f(x) = 2x3 − 3x2 + 8x + 5 with given zero 1 + 2i, read degree 3. The Fundamental Theorem of Algebra gives 3 zeros counted with repeats, so it sets the target count.
    2. All coefficients are real. Apply the complex conjugate pairs rule to add 1 − 2i. These two zeros leave one place; that zero must be real because a nonreal zero would need another partner.
    3. Use the Rational Zero Theorem to list ±1, ±5, ±12, ±52. The numerators divide 5 and the denominators divide 2. Test small candidates: f(1) = 12, f(−1) = −8, and f(12) = 172; none gives zero.
    4. Test −12 by synthetic division with 2, −3, 8, 5. Bring down 2, then multiply and add: −3 − 1 = −4, 8 + 2 = 10, and 5 − 5 = 0. The Remainder Theorem identifies the final 0 as f(−12). The other bottom entries give the quotient 2x2 − 4x + 10, and the Factor Theorem gives f(x) = (x + 12)(2x2 − 4x + 10).
    5. Collect −12, 1 + 2i and 1 − 2i. The Fundamental Theorem’s count is met and the nonreal pair is complete, so the search is finished.
    6. Check the quotient with the quadratic formula: x = 4±−644 = 4±8i4 = 1 ± 2i. Also substitute −12 into f to get −14 − 34 − 4 + 5 = 0. These checks recover the pair and verify the real zero.

    What it asks: Complete the zeros of a polynomial with real coefficients.

    1
    Are all coefficients real?
    YesInclude a conjugate for each nonreal zero.
    NoA conjugate partner is not guaranteed.
    ↓
    2
    Does the multiplicity total equal the degree?
    YesCheck the factors by expansion.
    NoFind the missing roots or repeated factors.
    1. Read the degree n. List the known zeros, each as many times as its multiplicity.
    2. With real coefficients, add the conjugate of each nonreal zero: keep the real part and reverse the sign of the imaginary part.
    3. Subtract your count from n. If one zero is missing, it is real.
    4. Find the missing zeros: test rational candidates with synthetic division, then solve a leftover quadratic with the formula.
    5. Check: n zeros in all, and each nonreal zero beside its conjugate.

    6 Worked example

    Worked example

    Every zero of a cubic, starting from one complex zero

    The number 1 + 2i is a zero of f(x) = 2x3 − 3x2 + 8x + 5. Find every zero of f.

    What it asks. Complete the zeros of a polynomial with real coefficients.

    Show the steps and the answer

    The plan. Add the conjugate partner, count what is missing, and test rational candidates for the real zero.

    degree 3 → 3 zeros

    given: 1 + 2i

    partner: 1 − 2i (real coefficients)

    one missing, so it is real

    found by testing: −12

    −1/2
    The whole line is the real numbers, and only −12 lands on it; 1 + 2i and 1 − 2i are not on the line at all.
    1. Plan. Add the conjugate partner, count what is missing, and test rational candidates for the real zero.
    1. Say what the question asks: find every input x that makes the output f(x) equal 0. One of them, 1+2i, is handed to you.A zero is an input whose output is 0, so the job is to name all of them, not only the given one.
    2. Read the degree: the biggest exponent on x is 3, so f has exactly 3 zeros, counting repeats.The Fundamental Theorem of Algebra: a polynomial of degree n has exactly n zeros among the complex numbers.
    3. Look at the coefficients 2, −3, 8 and 5. All are real, so the conjugate of 1+2i, which is 1−2i, is a zero too.Nonreal zeros of a polynomial with real coefficients come in complex conjugate pairs. The conjugate keeps the real part 1 and flips the sign of the i part.
    4. Count: 1+2i and 1−2i make 2 zeros, so 3−2=1 zero is missing, and it must be real.If the missing zero were nonreal, its own partner would be a zero too, making 4 zeros, more than degree 3 allows.
    5. List the rational candidates. The factors of the constant term 5 are 1 and 5, and the factors of the leading coefficient 2 are 1 and 2, so the candidates are ±1,±5,±12 and ±52.The Rational Zero Theorem: any rational zero is ± a factor of the constant term over a factor of the leading coefficient.
    6. Test the small ones first by plugging in: f(1)=2−3+8+5=12,f(−1)=−2−3−8+5=−8, and f(12)=2·18−3·14+8·12+5=14−34+4+5=172.A zero must give the output 0, and 12, −8 and 172 are not 0. Small candidates keep the arithmetic small; any order would work.
    7. Test −12 with synthetic division on the coefficients 2, −3, 8, 5. Bring down 2. Then 2×(−12)=−1 and −3+(−1)=−4. Then −4×(−12)=2 and 8+2=10. Then 10×(−12)=−5 and 5+(−5)=0.The last number is the remainder, which is f(−12) by the Remainder Theorem. It is 0, so −12 is a zero, and the other numbers 2, −4 and 10 give the quotient 2x2 − 4x + 10.
    8. Plug −12 back in to see it: f(−12)=2·(−18)−3·14+8·(−12)+5=−14−34−4+5=0.This confirms that the step found an input whose output is 0. Here (−12)3 = −18 and (−12)2 = 14.
    9. Collect the zeros: −12,1+2i and 1−2i. That makes 3, the degree, so the search is over.The Fundamental Theorem of Algebra promised exactly 3, and the one nonreal pair is complete.
    Answer
    • −12
    • 1 + 2i
    • 1−2i
    Double-check Solve the leftover quadratic 2x2 − 4x + 10 = 0 with the quadratic formula: a = 2, b = −4 and c = 10, so b2 − 4ac = 16 − 80 = −64 and −64 = 8i. Then x = 4±8i4 = 1 ± 2i. The given zero and its partner come back, so all three zeros agree.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 7

    Rung 1: almost trivial, count and find the zeros of x2 + 16

    How many zeros does f(x) = x2 + 16 have? Find them.

    What it asks. Count zeros and account for every repeat.

    Show the steps and the answer

    The plan. Read the degree, solve the equation, and check that the number of zeros matches the degree.

    −6−4−2246816243240
    y = x2 + 16 never comes lower than 16, so the graph shows no zero, and both zeros, 4i and −4i, are nonreal.
    1. Plan. Read the degree, solve the equation, and check that the number of zeros matches the degree.
    1. Say what it asks: how many inputs give the output 0, and which ones they are.A zero is an input x with f(x) = 0.
    2. Read the degree: 2. Expect exactly 2 zeros.The biggest exponent on x is 2, and the Fundamental Theorem of Algebra says degree n means n zeros, counting repeats.
    3. Set f(x)=0 and solve: x2+16=0, so x2=−16.This step finds every input that makes the output 0. Subtracting 16 from both sides keeps the equation balanced.
    4. Take both square roots: x=4i or x=−4i.−16 = 16 · −1 = 4i, and −4i squares to the same thing, since (−4i)2 = 16i2 = −16.
    5. Plug both back in: (4i)2+16=16i2+16=−16+16=0, and (−4i)2+16=16i2+16=0.This shows each input really gives the output 0, using i2 = −1.
    Answer
    • 2 zeros
    • 4i and −4i
    Double-check Use the quadratic formula with a = 1, b = 0 and c = 16: b2 − 4ac = 0 − 64 = −64 and −64 = 8i, so x = 0±8i2 = ±4i. Same two zeros, and they are a complex conjugate pair, 0 + 4i and 0 − 4i.

    Rung 2 of 7

    Rung 2: count the repeats

    List the zeros of f(x) = (x − 3)2(x + 1)3 with their multiplicities, and check the count against the degree.

    What it asks. Read zeros and multiplicities from factors.

    Show the steps and the answer

    The plan. Set each factor to zero and read its exponent; add the counts.

    −1, three times3, two times
    Only two points on the line, but they hold 5 zeros between them: −1 counts three times and 3 counts twice.
    1. Plan. Set each factor to zero and read its exponent; add the counts.
    1. Say what it asks: name each input that makes f(x)=0 and how many times it counts.The Fundamental Theorem of Algebra counts a zero once for each copy of its factor.
    2. The factor x−3 appears 2 times, so 3 is a zero of multiplicity 2.The exponent 2 means (x − 3)(x − 3), and x − 3 = 0 when x = 3.
    3. The factor x+1 appears 3 times, so −1 is a zero of multiplicity 3.x + 1 is x − (−1), so it is 0 when x = −1, and the exponent 3 means three copies.
    4. Add the multiplicities: 2+3=5 zeros in all.Each copy of a factor holds one zero.
    5. Find the degree: the biggest power is x2·x3=x5, so the degree is 5.Multiplied out, (x − 3)2 starts with x2 and (x + 1)3 starts with x3, and exponents add when powers of x multiply.
    Answer
    • 3, multiplicity 2
    • −1, multiplicity 3
    • 5 zeros in all, matching degree 5
    Double-check Plug in: f(3) = 02 · 43 = 0 and f(−1) = (−4)2 · 03 = 0, so both are zeros. Then write the factors one at a time, (x − 3)(x − 3)(x + 1)(x + 1)(x + 1): five factors, each with one x, so degree 5 and five zeros.

    Rung 3 of 7

    Rung 3: name the partners

    A polynomial f has real coefficients and degree 4. Two of its zeros are 2 − 5i and 3i. Find all of its zeros.

    What it asks. Complete the four zeros using conjugate partners.

    Show the steps and the answer

    The plan. Keep the real part and reverse only the imaginary sign.

    1. Plan. Keep the real part and reverse only the imaginary sign.
    1. Say what it asks: list every input that makes f(x)=0. Two are given, and the rest must come from the facts.No formula for f is given, so the degree and the pairing rule must do the work.
    2. The partner of 2−5i is 2+5i.The coefficients are real, so nonreal zeros come in complex conjugate pairs: keep the real part 2 and flip the sign of the i part.
    3. The partner of 3i is −3i.3i is 0 + 3i, and its conjugate is 0 − 3i, which is −3i.
    4. Count: 2−5i,2+5i, 3i and −3i are 4 zeros.Two pairs of two.
    5. Stop: these are all of them.The Fundamental Theorem of Algebra says degree 4 means exactly 4 zeros, so there is no room for a fifth, and none of the four can repeat.
    Answer
    • 2−5i
    • 2 + 5i
    • 3i
    • −3i
    Double-check Count a second way, with the splits for degree 4: 4 real, 2 real and one pair, or two pairs. Two complete pairs, (2 − 5i, 2 + 5i) and (3i, −3i), fill all 4 places, so f has no real zeros and nothing is missing.

    Rung 4 of 7

    Rung 4: which mixes are possible

    A polynomial has real coefficients and degree 5. How many of its zeros, counted with multiplicity, can be real?

    What it asks. Decide which real and nonreal zero counts are possible.

    Show the steps and the answer

    The plan. Check the degree total and require nonreal zeros to come in pairs.

    1. Plan. Check the degree total and require nonreal zeros to come in pairs.
    1. Say what it asks: list every possible number of real zeros that the degree and the pairing rule allow.No formula is given, so the answer is a list of possibilities, not one number.
    2. Total: exactly 5 zeros.The Fundamental Theorem of Algebra, degree 5.
    3. The nonreal zeros come two at a time, so there are 0, 2 or 4 of them.Each nonreal zero brings its conjugate, so the nonreal count is even, and it cannot pass 5.
    4. The real zeros fill the rest: 5−0=5,5−2=3 or 5−4=1.Real zeros plus nonreal zeros must make 5.
    Answer
    • 5, 3 or 1 real zeros
    • never 0, 2 or 4, so always at least one
    Double-check Each answer really happens. (x − 1)5 has 5 real zeros, 1 counted five times. (x − 1)3(x2 + 1) has 3 real zeros and the pair i, −i. (x − 1)(x2 + 1)(x2 + 4) has 1 real zero and the pairs i, −i and 2i, −2i. And 0, 2 or 4 real zeros would leave 5, 3 or 1 nonreal zeros, an odd number that cannot be split into pairs.

    Rung 5 of 7

    Rung 5: one zero given, the third found by testing

    The number −3 + i is a zero of f(x) = x3 + 5x2 + 4x − 10. Find every zero.

    What it asks. Complete the zeros of a polynomial with real coefficients.

    Show the steps and the answer

    The plan. Add the conjugate partner, count what is missing, and test rational candidates for the real zero.

    1. Plan. Add the conjugate partner, count what is missing, and test rational candidates for the real zero.
    1. Say what it asks: find every input with output 0. One of them, −3+i, is given.A zero is an input x with f(x) = 0.
    2. Partner: −3−i is a zero too.The coefficients 1, 5, 4 and −10 are real; keep the real part −3 and flip the sign of the i part.
    3. Degree 3 means 3 zeros. Two are known, so one is missing, and it is real.A nonreal third zero would bring its own partner, making 4.
    4. Candidates: ±1,±2,±5 and ±10.The Rational Zero Theorem: the factors of the constant term −10 are 1, 2, 5 and 10, over the factors of the leading coefficient 1.
    5. Test 1 with synthetic division on 1, 5, 4, −10. Bring down 1. Then 1×1=1 and 5+1=6. Then 6×1=6 and 4+6=10. Then 10×1=10 and −10+10=0.The remainder is 0, so 1 is a zero, and the quotient is x2 + 6x + 10.
    6. Plug 1 back in: f(1)=1+5+4−10=0.This shows the input 1 gives the output 0.
    Answer
    • 1
    • −3+i
    • −3−i
    Double-check Solve the quotient x2 + 6x + 10 = 0 with the quadratic formula: b2 − 4ac = 36 − 40 = −4 and −4 = 2i, so x = −6±2i2 = −3 ± i. The given zero and its partner come back.

    Rung 6 of 7

    Rung 6: degree 4, two rounds of testing

    The number 2i is a zero of f(x) = x4 + 2x3 + x2 + 8x − 12. Find every zero.

    What it asks. Complete the zeros of a polynomial with real coefficients.

    Show the steps and the answer

    The plan. Add the conjugate partner, then test rational candidates on f and on each quotient until four zeros are found.

    −31
    The two real zeros, −3 and 1, sit on the number line, while 2i and −2i do not.
    1. Plan. Add the conjugate partner, then test rational candidates on f and on each quotient until four zeros are found.
    1. Say what it asks: find every input with output 0. One of them, 2i, is given.A zero is an input x with f(x) = 0.
    2. Partner: −2i is a zero too.The coefficients 1, 2, 1, 8 and −12 are real, and the conjugate of 0 + 2i is 0 − 2i.
    3. Degree 4 means 4 zeros. Two are known, so two are missing. They could be two real zeros or another pair, so test.Two missing zeros fit either way; the count alone cannot decide.
    4. Candidates: ±1,±2,±3,±4,±6 and ±12.The Rational Zero Theorem: the factors of the constant term −12 over the factors of the leading coefficient 1.
    5. Test 1 with synthetic division on 1, 2, 1, 8, −12. Bring down 1. Then 1×1=1 and 2+1=3. Then 3×1=3 and 1+3=4. Then 4×1=4 and 8+4=12. Then 12×1=12 and −12+12=0.The remainder is 0, so 1 is a zero, and the quotient is q(x) = x3 + 3x2 + 4x + 12.
    6. Now three zeros are known, 2i, −2i and 1, so one is missing, and it is real.A nonreal last zero would bring a partner, making 5.
    7. Test candidates on q by plugging in: q(1)=1+3+4+12=20,q(−1)=−1+3−4+12=10,q(2)=8+12+8+12=40,q(−2)=−8+12−8+12=8, and q(−3)=−27+27−12+12=0.Every zero of the quotient is a zero of f, and the candidates for q are the same list. Only −3 gives the output 0.
    8. Plug −3 into f to see it: f(−3)=81−54+9−24−12=0.(−3)4 = 81, 2(−3)3 = −54, (−3)2 = 9 and 8(−3) = −24, and these with −12 add to 0.
    Answer
    • 1
    • −3
    • 2i
    • −2i
    Double-check Divide q by x + 3, which is x − (−3), with synthetic division on 1, 3, 4, 12 and c = −3. Bring down 1. Then 1 × (−3) = −3 and 3 + (−3) = 0. Then 0 × (−3) = 0 and 4 + 0 = 4. Then 4 × (−3) = −12 and 12 + (−12) = 0. The quotient is x2 + 4, and x2 + 4 = 0 gives x2 = −4, so x = 2i or x = −2i: the given pair comes back.

    Rung 7 of 7

    Rung 7: genuinely hard, show that a complex number is a zero

    Show that 1 + i is a zero of f(x) = x3 − 4x2 + 6x − 4, then find every zero.

    What it asks. Check a complex zero and find the remaining zeros.

    Show the steps and the answer

    The plan. Substitute to verify, add the conjugate, and test rational candidates for the last zero.

    1. Plan. Substitute to verify, add the conjugate, and test rational candidates for the last zero.
    1. Say what it asks: first, plug in 1+i and get the output 0; second, list all the zeros.Showing that a number is a zero means showing its output is 0.
    2. Square: (1+i)2=1+2i+i2=1+2i−1=2i.(A + B)2 = A2 + 2AB + B2, and i2 = −1.
    3. Cube: (1+i)3=(1+i)2·(1+i)=2i(1+i)=2i+2i2=−2+2i.Reuse the square, then 2i · i = 2i2 = −2.
    4. Plug in: f(1+i)=(−2+2i)−4(2i)+6(1+i)−4=−2+2i−8i+6+6i−4.Each power of 1 + i is replaced by the value found, and 6 multiplies both parts of 1 + i.
    5. Collect: the real parts give −2+6−4=0 and the i parts give 2i−8i+6i=0. So f(1+i)=0.Real parts add to real parts and i parts to i parts, like collecting like terms.
    6. Partner: 1−i is a zero too.The coefficients 1, −4, 6 and −4 are real.
    7. Degree 3 leaves one zero, and it is real. Candidates: ±1,±2,±4. Test: f(1)=1−4+6−4=−1, not 0; f(2)=8−16+12−4=0.The Rational Zero Theorem gives the candidates (factors of −4 over factors of 1), and only an output of 0 marks a zero.
    Answer
    • f(1 + i) = 0, so 1 + i is a zero
    • all zeros: 2, 1 + i, 1 − i
    Double-check Divide f by x − 2 with synthetic division on 1, −4, 6, −4. Bring down 1. Then 1 × 2 = 2 and −4 + 2 = −2. Then −2 × 2 = −4 and 6 + (−4) = 2. Then 2 × 2 = 4 and −4 + 4 = 0. The quotient x2 − 2x + 2 = 0 has b2 − 4ac = 4 − 8 = −4, so x = 2±2i2 = 1 ± i: the zero you tested and its partner.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: The graph of f(x) = x2 + 9 never touches the x-axis, so f has no zeros.
    A graph is drawn over real x values, so it shows only the real zeros. The Fundamental Theorem of Algebra counts zeros among all the complex numbers.
    ✓ Instead: Solve x2 + 9 = 0: x2 = −9, so x = 3i or x = −3i, and (3i)2 + 9 = −9 + 9 = 0. f has no real zeros but 2 zeros in all, a complex conjugate pair.
    ✗ Not this: f(x) = x2(x − 5) has only the zeros 0 and 5, so degree 3 breaks the theorem.
    x2 is x · x, so the factor x appears twice and the zero 0 has multiplicity 2.
    ✓ Instead: Counted with multiplicity, the zeros are 0, 0 and 5: three of them, matching degree 3.
    ✗ Not this: g(x) = x − 3i has the zero 3i, so −3i must be a zero too.
    The pairing rule needs every coefficient to be real, and the constant term −3i is not. Test it: g(−3i) = −3i − 3i = −6i, not 0.
    ✓ Instead: g has degree 1, so it has exactly 1 zero, 3i, with no partner. Only polynomials whose coefficients are all real force complex conjugate pairs.
    ✗ Not this: A degree 3 polynomial with real coefficients has the zeros 1 + i, 1 − i and 2 + i.
    2 + i would bring its partner 2 − i, making 4 zeros, one more than degree 3 allows.
    ✓ Instead: With real coefficients and the pair 1 + i, 1 − i, the third zero of a degree 3 polynomial must be a real number.
    ✗ Not this: Real zeros need partners too: if 4 is a zero, then −4 is a zero.
    The conjugate flips only the sign of the i part, and 4 = 4 + 0i has an i part of 0, so its conjugate is 4 itself. −4 is the negative of 4, a different idea.
    ✓ Instead: A real zero needs no partner: (x − 4)(x2 + 1) has the zeros 4, i and −i, and at −4 it gives (−8)(17) = −136, not 0.

    Tips and tricks

    • Memory device: degree n, n zeros; the nonreal ones come in twos. The degree is the head count, and a nonreal zero never travels alone.
    • Conjugate in one move, flip the i, keep the rest: 3 + 2i becomes 3 − 2i, −5i becomes 5i, and 7 stays 7.
    • Count check: real zeros with their repeats, plus nonreal zeros, must equal the degree, and with real coefficients the nonreal count is always even.
    • An odd degree with real coefficients always has at least one real zero, because an odd count cannot be made of pairs alone; its graph meets the x-axis somewhere.
    • When a problem hands you a nonreal zero, write its partner down first: it is a free zero you never have to search for.
    • The quadratic formula builds the pair for you: when the number under the root is negative, the ± gives a + bi and a − bi at once, as in 2 ± i.
    • Before adding a partner, check that every coefficient is real; one nonreal coefficient switches the pairing rule off.

    7 The trap

    Wrong: count only distinct intercepts. Right: count real and nonreal zeros with multiplicity to the degree.

    Keep in mind

    • Test tasks: count zeros with multiplicity, supply conjugate partners, and write all linear factors over the complex numbers.

    Flash cards

    Say the answer out loud, then flip.

    A polynomial has degree 5. How many zeros does it have?
    • Exactly 5, counting repeats and counting nonreal zeros.
    • The degree is the number of seats on the bus, and every seat is filled.
    Every coefficient of a polynomial is a real number, and −1 + 4i is a zero. What other zero must it have?
    • −1−4i.
    • With real coefficients, nonreal zeros board as twins: a + bi always rides with its conjugate a − bi.
    A degree 4 polynomial with real coefficients has the zeros 1 and 2 + i. How many zeros are still missing after you add the partner, and what kind must they be?
    • The partner 2 − i joins the list, so you have 3 zeros: 1, 2 + i and 2 − i.
    • 4 − 3 = 1 zero is missing.
    • It must be real, because nonreal zeros can only be missing two at a time.
    The graph of a degree 3 polynomial with real coefficients meets the x-axis at only one point. Does the polynomial have only one zero?
    • No. It has exactly 3 zeros, counted with multiplicity.
    • The graph shows only the real zeros, the riders by the window.
    • The other two seats are filled by repeats of that real zero or by a nonreal pair.

    Sources

    1. Jay Abramson. Precalculus 2e, 3.6 Zeros of Polynomial Functions. OpenStax, 2021. CC BY-NC-SA 4.0. Read 16 Nov 2026.

    From earlier

    The Factor Theorem

    What does the Factor Theorem say about x − c and f(c)?
    Show answer
    x − c is a factor of f(x) exactly when f(c) = 0. It is like packing muffins into boxes: nothing left over means the box size is a factor.

    Synthetic division by x - c

    You divide by x + 5 using synthetic division. What number goes in the box?
    Show answer
    −5. The divisor must be read as x − c, and x + 5 is x − (−5), so c = −5. The number in the box always has the opposite sign from the one you see in the divisor.