Midline, maximum, minimum and range
Quick review (2 minutes)
Imagine a Ferris wheel standing on a platform.
Rule: midline y = B, with B = . Minimum = B − |A|; maximum = B + |A|. Range: [B − |A|, B + |A|].
Find the center B from the outside addition or the average of the extremes.
Find the positive amplitude |A|.
Subtract the amplitude from B for the minimum.
Add the amplitude to B for the maximum.
Write the midline as an equation and the range as an included interval.
From an equation, read B and |A|.
From two extremes, average them for B and halve their difference for |A|.
Use B ± |A| to rebuild the extremes.
Keep the horizontal period separate from these vertical measurements.
Find the midline and range of y = −3 sin x + 1. This asks for the center line and every possible output height.
Midline: y = 1
Range: [−2, 4]
The Domain is the input set; the Range is the output set. A transformed sine or cosine still accepts every real x, while its output heights are bounded.
Sine
The vertical coordinate of a point on a circle of radius 1 after turning through the input angle. Its abbreviation is sin.
Cosine
The horizontal coordinate of a point on a circle of radius 1 after turning through the input angle. Its abbreviation is cos.
Cycle
One complete run through a repeating pattern, from one position in the pattern to the next identical position with the same direction of motion.
Amplitude
The vertical distance from a wave's middle line to a highest or lowest point. It equals |A| and is always positive for a changing wave.
A
The signed multiplier outside sine or cosine. Its absolute value gives the amplitude; a negative A turns the basic wave upside down.
Absolute value
A number's distance from 0 on the number line. Distance keeps size and removes direction, so absolute value is never negative.
Maximum
The greatest output a wave reaches. For y = A sin(ωx − φ) + B, it is B + |A|.
Minimum
The least output a wave reaches. For y = A sin(ωx − φ) + B, it is B − |A|.
Peak
A highest point on a wave. Its vertical coordinate is the maximum output, while its horizontal coordinate tells where that height occurs.
Trough
A lowest point on a wave. Its vertical coordinate is the minimum output, while its horizontal coordinate tells where that height occurs.
Period
The smallest positive horizontal distance after which the entire changing wave repeats. For positive ω, the period is .
T
The letter used for a wave's period. It measures one complete repeat along the horizontal axis.
Midline
The horizontal line halfway between a wave's greatest and least heights. Its equation is y = B, where B is the average of those heights.
B
The number added outside sine or cosine. It is the middle height and gives the midline equation y = B.
Vertical shift
Moving every point of a graph up or down by the same amount. Adding B outside the function shifts it up if B is positive and down if negative.
Range
All the output heights a function actually reaches. A sinusoidal wave's range includes every height from B − |A| through B + |A|.
Domain
All the inputs a function accepts. A sinusoidal formula made from sine or cosine accepts every real horizontal input.
Horizontal line
A straight line that stays at one height while extending left and right. Its equation has the form y = a fixed number.
Interval notation
A compact way to name all numbers between two endpoints. Square brackets include an endpoint; parentheses exclude it.
Substitution
Replacing each copy of an input letter with the chosen value before calculating.
Reflection
A flip across a line that preserves distances. Compared with the same positive multiplier and center, a negative outside multiplier exchanges heights above and below the midline.
Real number
Any number represented on the ordinary number line, including whole numbers, fractions, negative numbers and nonrepeating decimals.
1 In plain words
Imagine a Ferris wheel standing on a platform. Raising the platform raises its top, bottom and center by the same amount. It does not make the wheel bigger. The outside addition B does that to a wave. Its center becomes the Midline, a Horizontal line written y = B. The Maximum is the highest output; the Minimum is the lowest. A Peak is a highest point and a Trough is a lowest point. The Range lists every output height the wave reaches. Start at the center and move one amplitude up or down to find its limits. Square brackets mean the limiting heights are included.
Explain it like I am five
Picture a Ferris wheel on a platform. Raise the platform 7 meters and the top, the bottom and the hub all rise 7 meters, but the wheel is no bigger. The number B added outside does that to a wave: its center line becomes the midline, the flat line y = B, every point of it at height B.
Take y = 4 sin x + 7. B = 7, so the midline is y = 7. The amplitude is |4| = 4. Go 4 up from the center for the maximum, the highest output: 7 + 4 = 11. Go 4 down for the minimum, the lowest output: 7 − 4 = 3. The range, every height the wave reaches, is [3, 11], where square brackets mean 3 and 11 are included.
Check both formulas: the average, = 7, gives the midline, and half the gap, = 4, gives the amplitude. The domain, the inputs you may feed in, is still every real number x. Only the outputs are fenced in.
2 Picture it
Reminder
Reminder: Average, Absolute value, Interval notation, Substitution
- Average. The average of 10 and 2 is (10 + 2) ÷ 2 = 6.
- Absolute value. |−3| = 3; use 3 for both vertical distances.
- Interval notation. [−2, 4] means −2 ≤ y ≤ 4, with both endpoints included.
- Substitution. sin() = 1, so −3 sin() + 1 = −2.
3 Why
The original sine or cosine stays between −1 and 1. After multiplying, the heights lie between −|A| and |A|, regardless of reflection. Adding B makes the extremes B − |A| and B + |A|. Their average is B because the equal positive and negative distances cancel. Their half-difference is |A| because B cancels. This proves both the midline and amplitude formulas and explains why they measure different features. Sine's coordinate is positive for half a circle turn and negative for the other half; cosine has equal positive and negative halves too. Constant inside speed makes these equal horizontal lengths above and below B.
4 The rule
midline , with .
Minimum ; maximum . Range: .
The same idea, five ways
The midline is the horizontal line through the wave's center; the range is every height it reaches.
The wave is centered at height B and reaches one amplitude above and below.
- Midline: y = B
- B =
- Graph words: center line and vertical shadow.
Raising a Ferris wheel's platform raises its center and both extremes together.
The same idea, other ways
A wheel's center height and size are separate. The midline sets the center, and amplitude sets how far the top and bottom sit from it.
Add the extremes: (B + |A|) + (B − |A|) = 2B. Divide by 2 and the equal distances disappear.
A top at 10 and bottom at 2 center on 6. They are both 4 away, so midline y = 6 and amplitude 4.
Part 1: Vertical shift and midline
A Vertical shift changes every output by the same added amount. A horizontal line y = B has the same height for every input. Here y(x) means the wave's height at input x; it does not mean y times x.
- Rule: adding B outside moves every height by B.
- Rule: the midline equation is y = B.
- Rule: in a nonconstant sinusoidal wave, half the horizontal length of each complete cycle is above the midline and half is below it, apart from the crossing points.
The same idea, five ways
Vertical shift and midline
A Vertical shift changes every output by the same added amount. A horizontal line y = B has the same height for every input. Here y(x) names the wave's output height at input x; y(x + ) names its output half a period later.
- Rule: adding B outside moves every height by B.
- Rule: the midline equation is y = B.
Lift the whole Ferris wheel on a platform without making it larger.
Worked example
Add outside to lift every height
Compare y = sin x with y = sin x + 2. Find the new middle and two extreme heights.
Show the steps and the answer
- Add 2 to the original middle 0: new middle .An outside addition changes every output by the same amount.
- Add 2 to the original minimum and maximum 1: new extremes are 1 and 3.The whole graph slides upward without changing distances.
- The midline is and amplitude remains 1.Each extreme is still 1 away from the center.
- Midline: y = 2
- Minimum = 1
- Maximum = 3
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- sin x + 2 has midline y = 2 and amplitude 1.
Part 2: Upper and lower endpoints
The Range is the vertical shadow of the wave. Interval notation [a, b] includes every height from a through b. Set notation {y | a ≤ y ≤ b} says the same thing: all y satisfying the condition after the bar.
- Rule: range [B − |A|, B + |A|].
The same idea, five ways
Upper and lower endpoints
The range is the vertical shadow of the wave. Interval [a, b] includes every height from a through b. Set notation {y | a ≤ y ≤ b} says the same thing: all y satisfying the condition after the bar.
- Rule: range [B − |A|, B + |A|].
The wheel reaches every height between its lowest and highest rim points.
Worked example
A reflected wave above a new center
Find the midline and range of y = −3 sin x + 1. This asks for the center line and every possible output height.
Show the steps and the answer
- , so the midline is .The outside addition raises every height by 1.
- .The negative multiplier reflects the wave, but the distance is positive.
- Minimum .Move 3 below the center.
- Maximum .Move 3 above the center.
- The range is , including both endpoints.The sine wave passes continuously through every height between its attained extremes.
- Midline: y = 1
- Range: [−2, 4]
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Use |A| so the lower height comes first.
Part 3: Read height and center together
Subtract the extremes to find size. Add the extremes to find center. The two computations answer different questions.
- Rule: amplitude = .
- Rule: B = .
The same idea, five ways
Read height and center together
Subtract the extremes to find size. Add the extremes to find center. The two computations answer different questions.
- Rule: amplitude = .
- Rule: B = .
Find the center and radius of a wheel from its top and bottom heights.
Worked example
Find the center between two extremes
A wave has maximum 10 and minimum 2. Find its midline and amplitude. You want the middle height and the equal distance on each side.
Show the steps and the answer
- .The average of the two extremes locates the middle height.
- Amplitude .Half their separation is the distance on one side.
- Write the midline as .A line equation says every point on that horizontal line has height 6.
- Check and .Adding and subtracting the distance rebuilds the original extremes.
- Midline: y = 6
- Amplitude = 4
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- The midpoint is 6, and the amplitude is 4.
5 How
- Find the center B from the outside addition or the average of the extremes.
- Find the positive amplitude |A|.
- Subtract the amplitude from B for the minimum.
- Add the amplitude to B for the maximum.
- Write the midline as an equation and the range as an included interval.
Recover heights and center
- From an equation, read B and |A|.
- From two extremes, average them for B and halve their difference for |A|.
- Use B ± |A| to rebuild the extremes.
- Keep the horizontal period separate from these vertical measurements.
6 Worked example
Worked example
A reflected wave above a new center
Find the midline and range of y = −3 sin x + 1. This asks for the center line and every possible output height.
Show the steps and the answer
- , so the midline is .The outside addition raises every height by 1.
- .The negative multiplier reflects the wave, but the distance is positive.
- Minimum .Move 3 below the center.
- Maximum .Move 3 above the center.
- The range is , including both endpoints.The sine wave passes continuously through every height between its attained extremes.
- Midline: y = 1
- Range: [−2, 4]
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Memory device: center uses the sum, size uses the difference.
- Check that the midpoint of your range equals B.
7 The trap
The Domain is the input set; the Range is the output set. A transformed sine or cosine still accepts every real x, while its output heights are bounded.
Keep in mind
- The midline is a line, so write it as an equation: y = 7, not 7.
- The midline is the average of the maximum and the minimum: a wave from −1 to 9 has midline y = = 4.
- A negative A flips the wave, but the range still uses |A|: y = −4 sin x + 7 also has range [3, 11].
- The range is the outputs and the domain is the inputs: y = 4 sin x + 7 accepts every real x, yet its outputs stay in [3, 11].
Memory hook
Center plus or minus reach: range = [B − |A|, B + |A|]. The average of top and bottom gives the midline, and half their gap gives the amplitude.
Flash cards
Say the answer out loud, then flip.
What is the midline?
What is the range of a function?
Find the midline and range of y = 9 cos x + 1.
- Midline: y = 1
- Range: [−8, 10]
A wave peaks at 10 and bottoms out at −2. Find its midline and amplitude.
- Midline: y = = 4
- Amplitude: = 6