One cycle: solve the inside-input inequality
Quick review (2 minutes)
Think of a recipe that runs from its first instruction to its last.
Rule: 0 ≤ ωx − φ ≤ 2π gives h ≤ x ≤ h + T, where h = and T = , provided ω > 0.
Write 0 ≤ the entire inside input ≤ 2π.
Undo addition or subtraction in all three parts.
Undo multiplication by dividing all three parts by positive ω.
Plug both endpoints back into the inside; get 0 and 2π.
Subtract start from end to get the period.
Choose inside endpoints 0 and 2π.
Treat the three-part inequality as two inequalities joined together.
Perform the same undoing step on all three parts.
Check both boundaries by substitution and subtract them.
Find one cycle interval of y = sin x using the inside input from 0 to 2π. This asks for the horizontal beginning and end.
One cycle: [0, 2π]
Phase shift = 0
Period = 2π
Matching endpoint heights alone does not prove a full cycle. A sine wave also has equal heights half a cycle apart, but it then moves in the opposite direction.
Sine
The vertical coordinate of a point on a circle of radius 1 after turning through the input angle. Its abbreviation is sin.
Cosine
The horizontal coordinate of a point on a circle of radius 1 after turning through the input angle. Its abbreviation is cos.
Cycle
One complete run through a repeating pattern, from one position in the pattern to the next identical position with the same direction of motion.
A
The signed multiplier outside sine or cosine. Its absolute value gives the amplitude; a negative A turns the basic wave upside down.
Period
The smallest positive horizontal distance after which the entire changing wave repeats. For positive ω, the period is .
T
The letter used for a wave's period. It measures one complete repeat along the horizontal axis.
Phase shift
The signed horizontal shift in standard form with ω > 0. Positive means right; negative means left.
B
The number added outside sine or cosine. It is the middle height and gives the midline equation y = B.
Inside input
The entire expression fed into sine or cosine, such as ωx − φ. Calculate that expression before finding the sine or cosine output.
Quarter period
One fourth of a wave's period. Five key points separated by this distance mark the start, three interior points and the end of one cycle.
Coefficient
A number multiplying a variable or expression. Its location tells what quantity it scales.
Interval notation
A compact way to name all numbers between two endpoints. Square brackets include an endpoint; parentheses exclude it.
Three-part inequality
Two comparisons joined together so one quantity has a lower and upper bound at once.
Substitution
Replacing each copy of an input letter with the chosen value before calculating.
1 In plain words
Think of a recipe that runs from its first instruction to its last. Your clock and the recipe's progress need not use the same numbers. You must find when your clock makes the progress counter read the beginning, and when it makes the counter read the end. A sine or cosine cycle runs through inside inputs from 0 to 2π. A three-part inequality keeps that whole inside trip between its two endpoints. Undoing the operations finds the corresponding x-interval. Its left endpoint is the selected cycle start. Its length is the period. This method finds both without relying on a memorized sign trick.
Explain it like I am five
Picture a recipe with its own step counter, the inside of the parentheses, running from 0 to 2π while your kitchen clock reads x. One cycle is the stretch of clock time that walks the counter from 0 all the way to 2π. The three-part inequality 0 ≤ inside ≤ 2π, read "the inside is at least 0 and at most 2π", holds that whole trip in one line.
Take y = sin(2x − ). Write 0 ≤ 2x − ≤ 2π. Add to all three parts: ≤ 2x ≤ 2π + . Match bottoms to add: 2π = , so the right end is . Divide all three parts by 2, a positive number, so the ≤ signs stay: ≤ x ≤ .
The left end, , is the phase shift. The width, − = = π, is the period, matching = = π. Check both ends in the inside: 2 × − = 0, and 2 × − = − = 2π.
2 Picture it
Reminder
Reminder: Three-part inequality, Common denominators, Interval notation, Horizontal distance
- Three-part inequality. 0 ≤ 2x − π ≤ 2π becomes π ≤ 2x ≤ 3π after adding π everywhere.
- Common denominators.
- Interval notation. [0, π] means 0 ≤ x ≤ π; square brackets include both endpoints.
- Horizontal distance. From 2 to 5 the distance is 5 − 2 = 3.
3 Why
The inequality 0 ≤ ωx − φ ≤ 2π covers one full inside turn. Adding φ everywhere gives φ ≤ ωx ≤ φ + 2π. Dividing by positive ω gives h ≤ x ≤ h + T. Subtracting the endpoints cancels h, leaving T = . Sine and cosine both repeat after that full turn. Dividing T into four equal steps gives the Quarter period ; each step advances the inside by and connects the five familiar cycle stages.
4 The rule
gives , where and , provided .
The same idea, five ways
Find the horizontal interval that makes the inside do one full turn.
A selected cycle begins at h and ends at h + T.
- h ≤ x ≤ h + T
- [h, h + T]
Find when the recipe's counter reaches its first and last instruction.
The same idea, other ways
The inside travels one lap from 0 to 2π. The interval asks which horizontal inputs make that happen.
The inequality is a window containing one cycle. Sliding the window changes its position; stretching its width changes the period.
5 How
- Write 0 ≤ the entire inside input ≤ 2π.
- Undo addition or subtraction in all three parts.
- Undo multiplication by dividing all three parts by positive ω.
- Plug both endpoints back into the inside; get 0 and 2π.
- Subtract start from end to get the period.
Find cycle endpoints
- Choose inside endpoints 0 and 2π.
- Treat the three-part inequality as two inequalities joined together.
- Perform the same undoing step on all three parts.
- Check both boundaries by substitution and subtract them.
6 Worked example
Worked example
The basic cycle
Find one cycle interval of y = sin x using the inside input from 0 to 2π. This asks for the horizontal beginning and end.
Show the steps and the answer
- The inside is x, so .The base sine completes one turn as its inside moves through that interval.
- The selected start is and end is .These inputs send the inside to its required endpoints.
- Plug back: at the inside is 0; at the inside is .Both endpoints match the desired stages.
- Length .A horizontal distance is right endpoint minus left endpoint.
- One cycle: [0, 2π]
- Phase shift = 0
- Period = 2π
Ladder: from easy to exam-hard
Try each rung before you open its steps.
Rung 1 of 4
The basic cycle
Find one cycle interval of y = sin x using the inside input from 0 to 2π. This asks for the horizontal beginning and end.
Show the steps and the answer
- The inside is x, so .The base sine completes one turn as its inside moves through that interval.
- The selected start is and end is .These inputs send the inside to its required endpoints.
- Plug back: at the inside is 0; at the inside is .Both endpoints match the desired stages.
- Length .A horizontal distance is right endpoint minus left endpoint.
- One cycle: [0, 2π]
- Phase shift = 0
- Period = 2π
Rung 2 of 4
Speed up the inside
Find one cycle interval of sin(2x). Find the two x-values that make the inside run from 0 to 2π.
Show the steps and the answer
- Write .This restricts the inside input to one full turn.
- Divide all three parts by positive 2: .Positive division preserves their order.
- Plug back: and .The endpoints produce a full inside cycle.
- Length .Subtracting endpoints measures the width.
- One cycle: [0, π]
- Period = π
Rung 3 of 4
Speed and shift together: one cycle of y = sin(2x − )
Solve the inside-input inequality to find the x-interval that holds exactly one cycle of y = sin(2x − ). Check both endpoints in the inside input, then find the period. The figure graphs the inside input u = 2x − against x. It is a line with slope 2 that crosses the vertical axis at u = −.
Show the steps and the answer
- Write the entire inside input between 0 and 2π: .A basic sine cycle runs while its input climbs from 0 to 2π. Here the input of sine is the whole expression 2x − , so that whole expression, not just x, must run from 0 to 2π.
- Add to all three parts: . Since , the right side is . So .Subtracting was the last thing done to x, so it is undone first by adding . Adding the same number to every part keeps the double inequality true.
- Divide all three parts by 2. divided by 2 is , and divided by 2 is . So .x is multiplied by ω = 2, and dividing by a positive number keeps both inequality signs pointing the same way. The speed also divides the shift, so the cycle starts at , not at .
- Plug both endpoints back into the inside: , and .The start of the cycle must make the inside input 0 and the end must make it 2π. Getting exactly 0 and 2π confirms that the interval is one full cycle.
- Subtract start from end: . The period is .The period is the horizontal length of one cycle, and this cycle runs from x = to x = .
- One cycle: ≤ x ≤
- period π.
Work to write
- 2· − = 0 and 2· − = 2π
- Period = − = π
Rung 4 of 4
One cycle with a fractional coefficient: y = cos(x − )
For y = cos(x − ), solve the inside-input inequality to find the x-interval that holds exactly one cycle. Plug both endpoints back into the inside input, then find the period. The figure graphs the inside input u = x − against x.
Show the steps and the answer
- Write .Cosine completes one cycle as its input runs from 0 to 2π. The input here is the entire expression x − , not x alone.
- Add to all three parts: . Since , the right side is , so .Subtracting was the last thing done to x, so it is undone first. Adding the same amount to all three parts keeps the inequality true.
- Divide all three parts by by multiplying by its reciprocal : and . So .Dividing by a fraction is the same as multiplying by its reciprocal. Because ω = is positive, the inequality signs keep their direction. The usual slip is to multiply by instead, and the endpoint check in the next step would catch it.
- Plug both endpoints into the inside. At : . At : .The start of the cycle must make the inside 0 and the end must make it 2π. Getting exactly those two values confirms the solving.
- Subtract start from end: .The width of the interval that holds exactly one cycle is the period. It agrees with T = = 2π · = 3π.
Work to write
- Multiply all three parts by : ≤ x ≤
- · − = 0 and · − = 2π
- Period = − = 3π
Counterexamples
What it is not, and the tempting wrong moves.
Tips and tricks
- Write three copies of each addition or division mentally, one for each part.
- A and B never enter the horizontal cycle inequality.
- We select this one cycle to organize the calculation. The wave keeps repeating on both sides of the interval.
7 The trap
Matching endpoint heights alone does not prove a full cycle. A sine wave also has equal heights half a cycle apart, but it then moves in the opposite direction.
Keep in mind
- Do the same move to all three parts: adding to 0, to the middle and to 2π keeps the inequality true.
- Match bottoms before adding fractions with π: 2π + = + = .
- Dividing every part by a positive number keeps the ≤ signs, but dividing by a negative flips them: −2x ≤ 6 becomes x ≥ −3.
- Equal heights do not prove a full cycle: sin x is 0 at both x = 0 and x = π, yet π is only halfway, where the wave heads down instead of up.
Memory hook
Sandwich the inside: 0 ≤ inside ≤ 2π. Undo the minus, then the multiply, in all three parts. Left end = phase shift, width = period.
Flash cards
Say the answer out loud, then flip.
What does 1 ≤ x ≤ 4 mean?
What must the inside do during one cycle of sine or cosine?
Find one cycle of y = sin(x − ).
Find one cycle of y = cos(2x + π), then its period and phase shift.
- 0 ≤ 2x + π ≤ 2π
- Period: π
- Phase shift: to the left