Quarry School

Equations a calculator finishes

Subject: MathematicsLeans on: Radians and degreesLeans on: Signs by quadrantLeans on: Principal valuesLeans on: One more full turnLeans on: Subtracting a negativeLeans on: Rounding to four decimal placesLeans on: Solving a linear equationLeans on: The period
Level 1 · FoundationsAbout 19 min read2 new terms
How this was estimated

Programmatic estimate. Rung levels, worked steps, prerequisites, terms and sentence length contribute to this level. It describes the lesson, not your ability.

Reading counts the whole lesson, including folded explanations, at 180 words a minute. Practice allows two minutes per item. These are planning assumptions; take the time you need.

AI estimate unavailable.

Path to here

Open the unit’s lesson list to follow the lesson order.

    Quick review (2 minutes)

    In plain words

    Some trigonometric equations, like sin t = 0.4, do not land on a special angle, so no triangle or unit circle point you know gives the answer.

    Rule

    To find each solution on one turn [0, 2π) of sin t = c, cos t = c or tan t = c when c is not a special value (and −1 ≤ c ≤ 1 for sine and cosine): in radian mode, the inverse key gives α = arcsin c, arccos c or arctan c. The second solution is π − α for sine, 2π − α for cosine and α + π for tangent. Add 2π to any negative answer. Round only at the end, usually to four decimal places, and write ≈.

    Step

    1. Get the trig function alone: sin t = c, cos t = c or tan t = c.

    2. Look at c. A special value is solved exactly, with no calculator. For sine or cosine, a c above 1 or below −1 means no solution: stop.

    3. Put the calculator in radian mode.

    4. Press the inverse key (sin−1, cos−1 or tan−1) on c. Call the result α and keep every digit.

    5. Find the second solution: π − α for sine, 2π − α for cosine, α + π for tangent.

    6. If an answer is negative, add 2π to it so it lands in [0, 2π).

    7. Round each answer to four decimal places, write ≈, and put each one back into the equation to check.

    Question

    Solve sin t = 0.4 for 0 ≤ t < 2π, rounded to four decimal places. In plain words: the sine of the angle, the height of its point on the unit circle, is 0.4; find every angle in one turn with that height.

    Answer

    t ≈ 0.4115
    t ≈ 2.7301
    (both rounded to four decimal places)

    Trap

    Stopping at the calculator's answer. The inverse key shows one angle, but sin t = 0.4 has two on one turn. After every key press, ask which other quadrant shares the sign, and find the second angle with π − α, 2π − α or α + π.

    Strategy

    1. Get sin t, cos t or tan t alone, equal to a number c.

    2. Use the map below to decide whether the calculator is needed at all.

    3. In radian mode, press the inverse key on c. Call the result α and keep every digit.

    4. Find the second solution with the mirror for that function.

    5. Add 2π to any negative answer.

    6. Round to four decimal places at the end, write ≈, and put each answer back into the original equation.

    Term

    solution on one turn

    Definition

    A solution inside one trip around the circle, the interval [0, 2π). The start, 0, is included; the end, 2π, is left out because it is the same spot as 0.

    Term

    general solution

    Definition

    One formula naming every solution: the solutions on one turn plus any whole number of periods, as in t = a + 2kπ, where k is any integer, negative, zero or positive.

    Term

    period

    Definition

    How far you go along before a function's pattern starts over. Sine and cosine repeat every 2π, one full turn; tangent repeats every π, half a turn.

    Term

    reference angle

    Definition

    The angle between an angle's ending ray, its terminal side, and the nearest part of the x-axis, from 0 to π2. Angles sharing one have the same sine and cosine except for sign.

    1 In plain words

    Some trigonometric equations, like sin t = 0.4, do not land on a special angle, so no triangle or unit circle point you know gives the answer. A calculator helps, but it behaves like the operator of a Ferris wheel. Ask when your seat will be at a certain height, and the operator names one moment: the one on the way up. Your seat passes that same height again on the way down, and nobody mentions it. You work that moment out from the shape of the ride. In the same way, the calculator's inverse key hands you one angle, and the unit circle shows you where the second one hides. Last, you round the decimals once, at the very end.

    2 Picture it

    0.41152.7301π/2π3π/22π−110.41152.7301π/2π3π/22π−11
    Plot the height sin t for one turn.

    Reminder

    Reminder: Radians and degrees, Signs by quadrant, Principal values, One more full turn, Subtracting a negative, Rounding to four decimal places, Solving a linear equation, The period
    • Radians and degrees. 180° = π radians, so one radian is about 57.3°: 0.4115 radians ≈ 23.58°.
    • Signs by quadrant. All Students Take Calculus: all three are positive in Quadrant I, sine in II, tangent in III, cosine in IV. So sin t = 0.4 needs Quadrants I and II.
    • Principal values. arcsin and arctan return an angle from −π2 to π2; arccos returns one from 0 to π. So arcsin(−0.25) ≈ −0.2527 is negative, but arccos(−0.8) ≈ 2.4981 is not.
    • One more full turn. Adding 2π to an angle lands on the same point of the circle: −0.2527 + 6.2832 = 6.0305.
    • Subtracting a negative. Taking away a negative adds: 3.1416 − (−0.2527) = 3.1416 + 0.2527 = 3.3943.
    • Rounding to four decimal places. Look at the fifth digit after the point: 5 or more rounds the fourth digit up. 2.730075 becomes 2.7301, and 0.411516 becomes 0.4115.
    • Solving a linear equation. Undo the adding, then the multiplying: 3 tan t + 6 = 0 becomes 3 tan t = −6, then tan t = −2.
    • The period. Sine and cosine repeat every 2π and tangent every π: if t ≈ 2.0344 solves tan t = −2, so does 2.0344 + kπ for every integer k.

    3 Why

    A key can show only one number, so the calculator's makers had to pick one angle for each value. For arcsin they picked angles from −π2 to π2, the right half of the circle, because every height from −1 to 1 shows up there exactly once. Call that angle α. The other angle with the same sine sits on the left half at the same height: the mirror image across the vertical axis, the angle π − α. Rounding waits for the end because every rounded number carries a small error, and arithmetic on rounded numbers piles those errors up.

    4 The rule

    To find each solution on one turn [0,2π) of sint=c,cost=c or tant=c when c is not a special value (and −1≤c≤1 for sine and cosine): in radian mode, the inverse key gives α= arcsin c, arccos c or arctan c.

    The second solution is π−α for sine, 2π−α for cosine and α+π for tangent. Add 2π to any negative answer. Round only at the end, usually to four decimal places, and write ≈.

    The same idea, five ways

    Say it

    t is about zero point four one one five radians: the arcsine of zero point four, read off the inverse key.

    Write it

    On one turn, sin t = 0.4 has two solutions: the arcsine of 0.4, which is about 0.4115, and π minus that, which is about 2.7301.

    In math
    • t = arcsin 0.4 ≈ 0.4115
    • t = sin−1(0.4) ≈ 0.4115, in radian mode
    • t = π − arcsin 0.4 ≈ 2.7301
    • {t | sin t = 0.4, 0 ≤ t < 2π} ≈ {0.4115, 2.7301}
    Like

    Like asking a Ferris wheel operator when your seat reaches a height: you are told the moment on the way up, and you find the moment on the way down yourself.

    See it
    x = cos θy = sin θα ≈ 0.4115
    The calculator's angle: the point on the right half of the circle at height 0.4.

    The same idea, other ways

    As a picture

    Draw the unit circle and the flat line at height 0.4. It cuts the circle twice, once on the right half and once on the left half. The inverse key answers only with angles from −π2 to π2, the right half of the circle, so it gives the right point, at angle α ≈ 0.4115. The left point is the mirror image across the vertical axis, at angle π − α ≈ 2.7301.

    x = cos θy = sin θπ − α ≈ 2.7301
    The mirror point on the left half, at the same height 0.4: the solution the inverse key never gives.
    With numbers

    Type sin(0.4115), then sin(2.7301): both come out as 0.4000 to four decimal places. Now type sin−1(0.4): only 0.411516846 comes back. Two angles in one turn have sine 0.4, but a key can return one number, so the second angle is your job.

    Why it must be true

    The point at angle α is (cos α, sin α). Flip it across the vertical axis: x changes sign and the height stays. The new point, (−cos α, sin α), is α short of a half turn, so its angle is π − α. Same height means same sine, so sin(π − α) = sin α.

    As a rule of thumb

    Calculator first, then the mirror: sine mirrors left to right (π − α), cosine mirrors top to bottom (2π − α), tangent jumps half a turn (α + π). A negative α from the inverse key is never below −π2, so adding 2π once brings it into the turn.

    EquationThe inverse key gives αSecond solution on [0, 2π)The mirror behind it
    sin t = carcsin c, from −π2 to π2π − α (when c is 1 or −1 there is no second solution: π − α lands on the same point as α)across the vertical axis: same height
    cos t = carccos c, from 0 to π2π − α (when c is 1 or −1 there is no second solution: 2π − α lands on the same point as α)across the horizontal axis: same x
    tan t = carctan c, between −π2 and π2α + πhalf a turn: same ratio yx
    any of the threea negative α (from arcsin or arctan)not another solution: write α + 2π in place of α, the same point named inside [0, 2π)a full turn: same point

    5 How

    1. Get the trig function alone: sin t = c, cos t = c or tan t = c.
    2. Look at c. A special value is solved exactly, with no calculator. For sine or cosine, a c above 1 or below −1 means no solution: stop.
    3. Put the calculator in radian mode.
    4. Press the inverse key (sin−1, cos−1 or tan−1) on c. Call the result α and keep every digit.
    5. Find the second solution: π − α for sine, 2π − α for cosine, α + π for tangent.
    6. If an answer is negative, add 2π to it so it lands in [0, 2π).
    7. Round each answer to four decimal places, write ≈, and put each one back into the equation to check.

    Finishing a trig equation with the calculator

    1
    Is c a special value? For sine and cosine: 0, 12, 22, 32, 1 or one of their negatives. For tangent: 0, 33, 1, 3 or one of their negatives.
    YesSolve exactly with the reference angle and the quadrants. No calculator.
    NoGo on.
    ↓
    2
    Is it sine or cosine, with c above 1 or below −1?
    YesStop: no solution. A point on the unit circle never goes past 1 or −1.
    NoGo on.
    ↓
    3
    Is the calculator in radian mode (often shown as RAD on the screen)?
    YesPress the inverse key on c and call the result α.
    NoSwitch to radian mode first, or α comes out in degrees.
    ↓
    4
    Is the equation in sine?
    YesSecond solution: π − α.
    NoGo on.
    ↓
    5
    Is the equation in cosine?
    YesSecond solution: 2π − α.
    NoIt is tangent. Second solution: α + π.
    ↓
    6
    Is either answer negative?
    YesAdd 2π to it.
    NoRound to four decimal places and check.
    1. Get sin t, cos t or tan t alone, equal to a number c.
    2. Use the map below to decide whether the calculator is needed at all.
    3. In radian mode, press the inverse key on c. Call the result α and keep every digit.
    4. Find the second solution with the mirror for that function.
    5. Add 2π to any negative answer.
    6. Round to four decimal places at the end, write ≈, and put each answer back into the original equation.

    6 Worked example

    Worked example

    Solving sin t = 0.4 with the inverse key

    Solve sin t = 0.4 for 0 ≤ t < 2π, rounded to four decimal places. In plain words: the sine of the angle, the height of its point on the unit circle, is 0.4; find every angle in one turn with that height.

    Show the steps and the answer

    sin−1 0.4 ≈ 0.411516846 (Quadrant I)

    π − 0.411516846 ≈ 2.730075808 (Quadrant II)

    Round last: t ≈ 0.4115 and t ≈ 2.7301

    Check: 0.4115 + 2.7301 = 3.1416 ≈ π

    1. Look at 0.4. The special sines are 0, 12,22≈0.7071,32≈0.8660, 1 and their negatives. 0.4 is none of them, and it lies between −1 and 1.A special value would be solved exactly, and a value outside [−1, 1] would have no solution. Neither happens, so answers exist and the calculator is needed.
    2. Sine is positive here, so expect two answers: one in Quadrant I and one in Quadrant II.All Students Take Calculus: sine is positive in Quadrants I and II only.
    3. In radian mode, press sin−1 0.4. The screen shows 0.411516846 (some calculators show more digits). Call it α and keep every digit.The inverse key returns the one angle from −π2 to π2 whose sine is 0.4. It is between 0 and 1.5708, so it is the Quadrant I answer.
    4. Second solution: π−α≈3.141592654−0.411516846=2.730075808.Mirroring the point across the vertical axis keeps its height at 0.4 and gives the angle π − α. The result is between 1.5708 and 3.1416, so it is in Quadrant II, as expected.
    5. Round both to four decimal places: 0.411516846 becomes 0.4115, and 2.730075808 becomes 2.7301.Rounding once, at the end, keeps the error in the last digit. The fifth digits after the point are 1 and 7, so the first stays and the second rounds up.
    Answer
    • t ≈ 0.4115
    • t ≈ 2.7301
    • (both rounded to four decimal places)
    Double-check Put each answer back: sin(0.4115) ≈ 0.39998 and sin(2.7301) ≈ 0.39998, both 0.4000 to four decimal places. Second way: the two points are mirror images across the vertical axis, so the first answer is as far past 0 as the second is short of π. The two must add to π, and 0.4115 + 2.7301 = 3.1416 ≈ π.

    Ladder: from easy to exam-hard

    Try each rung before you open its steps.

    Rung 1 of 5

    A positive cosine, cos t = 0.6

    Solve cos t = 0.6 for 0 ≤ t < 2π, to four decimal places. In plain words: the x of the angle's point on the unit circle is 0.6; find every angle in one turn with that x.

    Show the steps and the answer
    x = cos θy = sin θ2π − α ≈ 5.3559
    Cosine's mirror point sits below the horizontal axis, with the same x = 0.6.
    1. 0.6 is not a special cosine and lies between −1 and 1. Cosine is positive, so expect answers in Quadrants I and IV.The special cosines are 0, 12, 22 ≈ 0.7071, 32 ≈ 0.8660, 1 and their negatives; cosine is positive in Quadrants I and IV (All Students Take Calculus).
    2. Radian mode: cos−10.6≈0.927295218. Call it α and keep every digit.arccos returns the angle from 0 to π with cosine 0.6. It is below 1.5708, so it is the Quadrant I answer.
    3. Second solution: 2π−α≈6.283185307−0.927295218=5.355890089.Mirroring across the horizontal axis keeps x = 0.6, and the result is between 4.7124 and 6.2832, in Quadrant IV.
    4. Round: 0.9273 and 5.3559.Four decimal places, once, at the end.
    Answer
    • t ≈ 0.9273
    • t ≈ 5.3559
    Double-check cos(0.9273) ≈ 0.6000 and cos(5.3559) ≈ 0.6000. Second way: the two points are mirror images across the horizontal axis, so the answers add to 2π: 0.9273 + 5.3559 = 6.2832 ≈ 2π.

    Rung 2 of 5

    A tangent, tan t = 2.5

    Solve tan t = 2.5 for 0 ≤ t < 2π, to four decimal places. In plain words: the angle's point has y two and a half times its x; find every angle in one turn like that.

    Show the steps and the answer
    1. 2.5 is not a special tangent. Tangent can be any number, so answers exist. Tangent is positive, so expect Quadrants I and III.The special tangents are 0, 33 ≈ 0.5774, 1, 3 ≈ 1.7321 and their negatives; unlike sine and cosine, tangent is not kept between −1 and 1.
    2. Radian mode: tan−12.5≈1.190289950. Call it α and keep every digit.arctan returns the angle between −π2 and π2 with tangent 2.5. It is below 1.5708, so it is the Quadrant I answer.
    3. Second solution: α+π≈1.190289950+3.141592654=4.331882604.Half a turn away, x and y both change sign, so the ratio yx is still 2.5. The result is between 3.1416 and 4.7124, in Quadrant III.
    4. Round: 1.1903 and 4.3319.Four decimal places at the end, and no earlier.
    Answer
    • t ≈ 1.1903
    • t ≈ 4.3319
    Double-check tan(1.1903) ≈ 2.5001 and tan(4.3319) ≈ 2.5001, both 2.500 when rounded to three decimal places; the tiny gap comes from rounding the angles. Second way: the two tangent answers differ by half a turn: 4.3319 − 1.1903 = 3.1416 ≈ π.

    Rung 3 of 5

    A negative sine, sin t = −0.25

    Solve sin t = −0.25 for 0 ≤ t < 2π, to four decimal places. In plain words: the height of the angle's point is −0.25, a little below the center; find every angle in one turn at that height.

    Show the steps and the answer
    -14.48°345.52°same terminal side
    The calculator's clockwise angle and the angle one full turn later end on the same side.
    1. −0.25 is between −1 and 1 and is not a special sine. Sine is negative, so expect answers in Quadrants III and IV.Sine is positive only in Quadrants I and II, so a negative sine lives in III and IV.
    2. Radian mode: sin−1(−0.25)≈−0.252680255. Call it α and keep every digit.arcsin returns an angle from −π2 to π2; a negative height gives a negative angle, a small clockwise turn into Quadrant IV.
    3. α is not in [0,2π), so add a full turn: α+2π≈−0.252680255+6.283185307=6.030505052.Adding 2π lands on the same point of the circle, now inside one counterclockwise turn. This is the Quadrant IV answer.
    4. Second solution: π−α≈3.141592654−(−0.252680255)=3.394272909.Sine's mirror is π − α even when α is negative. Subtracting a negative adds, and the result is between 3.1416 and 4.7124, in Quadrant III.
    5. Round and list from smallest to largest: 3.3943 and 6.0305.Four decimal places, once, at the end.
    Answer
    • t ≈ 3.3943
    • t ≈ 6.0305
    Double-check Second way, with the reference angle arcsin 0.25 ≈ 0.2527: Quadrant III gives π + 0.2527 ≈ 3.3943 and Quadrant IV gives 2π − 0.2527 ≈ 6.0305, the same two answers. Put back: sin(3.3943) ≈ −0.2500 and sin(6.0305) ≈ −0.2500.

    Rung 4 of 5

    A negative cosine, cos t = −0.8

    Solve cos t = −0.8 for 0 ≤ t < 2π, to four decimal places. In plain words: the x of the angle's point is −0.8, on the left side; find every angle in one turn with that x.

    Show the steps and the answer
    1. −0.8 is between −1 and 1 and is not a special cosine. Cosine is negative, so expect answers in Quadrants II and III.Cosine is positive only in Quadrants I and IV.
    2. Radian mode: cos−1(−0.8)≈2.498091545. Call it α and keep every digit.arccos returns an angle from 0 to π, never a negative one. For a negative cosine it lands between 1.5708 and 3.1416, in Quadrant II, so no 2π fix is needed.
    3. Second solution: 2π−α≈6.283185307−2.498091545=3.785093762.Cosine's mirror across the horizontal axis keeps x = −0.8. The result is between 3.1416 and 4.7124, in Quadrant III.
    4. Round: 2.4981 and 3.7851.Four decimal places, once, at the end.
    Answer
    • t ≈ 2.4981
    • t ≈ 3.7851
    Double-check The two cosine answers add to 2π: 2.4981 + 3.7851 = 6.2832 ≈ 2π. Second way, with the reference angle arccos 0.8 ≈ 0.6435: Quadrant II gives π − 0.6435 ≈ 2.4981 and Quadrant III gives π + 0.6435 ≈ 3.7851.

    Rung 5 of 5

    Rearrange first, then every solution, 3 tan t + 6 = 0

    Solve 3 tan t + 6 = 0. Give each solution on one turn, 0 ≤ t < 2π, to four decimal places, then the general solution. In plain words: find the value tan t must have, then every angle with that tangent.

    Show the steps and the answer
    2.03445.1760π/2π3π/22π−4−224
    Plot tan t for one turn: the flat line at −2 meets it twice, and the two meetings are π apart.
    1. Get tan t alone: subtract 6 from both sides, 3tant=−6, then divide by 3, tant=−2. Put it back: 3×(−2)+6=0.This finds the one value tan t must have, so the calculator method can start from tan t = c.
    2. −2 is not a special tangent. Tangent is negative, so expect answers in Quadrants II and IV.Tangent is positive in Quadrants I and III only.
    3. Radian mode: tan−1(−2)≈−1.107148718. Call it α and keep every digit.arctan returns an angle between −π2 and π2; a negative tangent gives a negative angle, in Quadrant IV.
    4. Second solution: α+π≈−1.107148718+3.141592654=2.034443936.Half a turn away, x and y both change sign and the ratio stays −2. The result is between 1.5708 and 3.1416, in Quadrant II.
    5. α is negative, so add 2π: α+2π≈−1.107148718+6.283185307=5.176036589.A full turn lands on the same point, now inside one turn, between 4.7124 and 6.2832 in Quadrant IV.
    6. The general solution, every solution at once: t≈2.0344+kπ, where k is any integer (0,1,−1,2,−2 and so on).Tangent repeats every half turn, so one answer plus whole multiples of π reaches all of them. k = 1 gives 2.0344 + 3.1416 = 5.1760, the other answer on one turn.
    Answer
    • On one turn: t ≈ 2.0344 and t ≈ 5.1760
    • General solution: t ≈ 2.0344 + kπ, k any integer
    Double-check The two answers on one turn differ by half a turn: 5.1760 − 2.0344 = 3.1416 ≈ π. Put back: tan(2.0344) ≈ −2.0002 and tan(5.1760) ≈ −2.0002, both −2.000 to three decimal places; the small gap comes from rounding the angles.

    Counterexamples

    What it is not, and the tempting wrong moves.

    ✗ Not this: sin t = 0.4 and the calculator says 0.4115, so the only answer is t ≈ 0.4115.
    The key returns only the angle in its own range, the right half of the circle. Sine is also positive in Quadrant II, where a second angle has the same height.
    ✓ Instead: t ≈ 0.4115 and t ≈ π − 0.4115 ≈ 2.7301.
    ✗ Not this: In degree mode, sin−1 0.4 shows 23.5782, so the second solution is π − 23.5782 ≈ −20.4366.
    23.5782 is in degrees and π is in radians. Subtracting one from the other mixes units, like subtracting inches from centimeters, and the negative result is not even on one turn.
    ✓ Instead: Switch to radian mode (0.4115 and 2.7301), or stay in degrees the whole way: 23.5782° and 180° − 23.5782° = 156.4218°.
    ✗ Not this: For cos t = 0.6, the second solution is π − 0.9273 ≈ 2.2143.
    π − α is the mirror for sine. Cosine is positive in Quadrants I and IV, not II, and cos(2.2143) ≈ −0.6000 has the wrong sign.
    ✓ Instead: Mirror across the horizontal axis instead: 2π − 0.9273 ≈ 5.3559, and cos(5.3559) ≈ 0.6000.
    ✗ Not this: Round early: α ≈ 0.4, so π − 0.4 ≈ 2.7416. Or use 3.14 for π: 3.14 − 0.4115 = 2.7285.
    Each shortcut throws digits away, and the lost amount moves into the answer: both miss the true 2.7301, one in the second decimal place and one in the third.
    ✓ Instead: Keep every digit and use the π key until the last step: π − 0.411516846 ≈ 2.7301.
    ✗ Not this: sin t = 0.5: the calculator gives 0.5236, so t ≈ 0.5236 and t ≈ 2.6180.
    The decimals are correct, but 0.5 is a special value. Its exact answers need no rounding and show where the angles sit on the circle.
    ✓ Instead: t = π6 and t = 5π6, exactly (about 0.5236 and 2.6180).
    ✗ Not this: sin t = 1.3: the calculator shows an error, so switch modes and try again.
    No angle has a sine above 1 in any mode, because the height of a point on the unit circle never passes 1. The error message is the answer.
    ✓ Instead: No solution.

    Tips and tricks

    • Memory device, key, mirror, fix, round: press the inverse key, find the mirror angle, fix a negative angle by adding 2π, and round last.
    • Mode check: in radian mode, sin−1 and tan−1 never give a number outside −1.5708 to 1.5708, and cos−1 never one outside 0 to 3.1416. A screen showing 23.5782 for sin−1 0.4 means degree mode.
    • Quadrant borders as decimals: π2 ≈ 1.5708, π ≈ 3.1416, 3π2 ≈ 4.7124 and 2π ≈ 6.2832. Compare a decimal answer with them to read its quadrant.
    • Built-in check: two sine answers add to π (or to 3π when α was negative), two cosine answers add to 2π, and two tangent answers differ by π.
    • A rounded angle put back into the equation returns c to about three decimal places, not exactly: tan(1.2490) ≈ 2.9995. For sine, cosine and a tangent value up to about 5 in size, the two numbers differ by less than 0.002, so a gap of 0.01 or more means a real mistake. Tangent climbs steeply near its asymptotes, so a large value forgives less: tan t = 500 gives t ≈ 1.5688, and tan(1.5688) ≈ 500.92, a right answer that still misses by almost 1.
    • sin−1 0.4 means the angle whose sine is 0.4, not 1sin0.4. On many calculators it sits above the sin key and is reached with a 2nd or SHIFT key.
    • Why four decimal places: 0.01 radian is more than half a degree (about 0.57°), so two places can be visibly off. Four places keep the error under 0.003°.

    7 The trap

    Stopping at the calculator's answer. The inverse key shows one angle, but sin t = 0.4 has two on one turn. After every key press, ask which other quadrant shares the sign, and find the second angle with π − α, 2π − α or α + π.

    Flash cards

    Say the answer out loud, then flip.

    In radian mode, sin−1(0.7) ≈ 0.7754. Why is that not the whole answer to sin t = 0.7 on [0, 2π)?
    • The point on the unit circle reaches height 0.7 twice per turn, like a Ferris wheel seat: once on the way up and once on the way down. The calculator names only the moment on the way up, α ≈ 0.7754.
    • The moment on the way down is π − α ≈ 2.3662 (rounded to four decimal places).
    The inverse key gives α. How do you get both solutions on [0, 2π) for sine, for cosine and for tangent?
    • Sine: α and π − α
    • Cosine: α and 2π − α
    • Tangent: α and α + π
    • Then add 2π to any answer that came out negative.
    • One caution: when sin t or cos t is 1 or −1, one turn holds a single answer, read from the axes. There the two formulas name the same angle twice or land on 2π, which is not in [0, 2π).
    What do you write for sin t = 1.3, and how can you tell before using the calculator?
    • No solution.
    • Sine is the height of a point on the unit circle, and that height never goes above 1 or below −1, the way a Ferris wheel seat never rises above the top of the wheel. A calculator would only show an error.
    Why keep every digit of α and round only once, at the very end?
    • Every rounded number carries a small error, and arithmetic on rounded numbers piles the errors up.
    • For tan t = −2, keeping every digit gives α + π ≈ 2.0344, but rounding α to −1.1071 first gives −1.1071 + π ≈ 2.0345, off in the last decimal place.